Scribd
Upload
83 views

Rgu Seal

This document provides specifications for RGU-Packings hydraulic packings for pistons. It includes a dimension table with the available sizes for the packings and grooves, with dimensions for things like diameter, length, thickness. It also includes the part numbers for the standard packings and combination back-up rings. Notes indicate that the packings are made-to-order and should be properly stored, and that an "A" at the end of the part number specifies an innovated product.

Uploaded by

CALVIN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
83 views

Rgu Seal

This document provides specifications for RGU-Packings hydraulic packings for pistons. It includes a dimension table with the available sizes for the packings and grooves, with dimensions for things like diameter, length, thickness. It also includes the part numbers for the standard packings and combination back-up rings. Notes indicate that the packings are made-to-order and should be properly stored, and that an "A" at the end of the part number specifies an innovated product.

Uploaded by

CALVIN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RGU-Packings Hydraulic packings for pistons

（Installable in one-piece groove）

Dimension table

H PWL-Bearing GA±0.2

Details of groove

R
25°

L
R0.3 max.
R1∼2
φD H9/f8

▽▽
▽▽
φD2 h11
φD1 h9
φD1 h9

φd h9
φD

φd

▽▽▽ R
. 4 m 0.4
0
R ax . a x.
m
（▽▽▽：6.3S ▽▽：12.5S）
3.2S Honing

＋0.35
Back-up ring GB＋0.10 Wear ring

Note: ● Consider adopting divided grooves if one-piece groove is technically adverse.


● φD H9/f8 would be modified according to the variation of the bearing structure.
● For applications installed together with PWL bearings or wear rings, refer to the dimension table of the applicable wear ring.
● For information on preferred values of surface finish（roughness） , see page 14.

Dimension table of RGU-Packings （Unit：mm）

Packing & Groove dimensions Part No.


Standard material Combination back-up ring
D  d  H  GA  GB  D1 D2 L 
（RN923） （PT111）
40 30 6.5 7.0 11.0 39.5 38.5 2.5 RGU- 40A TBC- 40×30×2
45 35 6.5 7.0 11.0 44.5 43.5 2.5 RGU- 45A TBC- 45×35×2
50 40 6.5 7.0 11.0 49.5 48.5 2.5 RGU- 50A TBC- 50×40×2
55 45 6.5 7.0 11.0 54.4 53.0 2.5 RGU- 55A TBC- 55×45×2
60 50 6.5 7.0 11.0 59.4 58.0 2.5 RGU- 60A TBC- 60×50×2
                   
63 53 6.5 7.0 11.0 62.4 61.0 2.5 RGU- 63A TBC- 63×53×2
65 55 6.5 7.0 12.0 64.4 63.0 2.5 RGU- 65A TBC- 65×55×2.5
70 60 6.5 7.0 12.0 69.4 68.0 2.5 RGU- 70A TBC- 70×60×2.5
75 65 6.5 7.0 12.0 74.4 73.0 2.5 RGU- 75A TBC- 75×65×2.5
80 67 8.0 8.5 13.5 79.4 78.0 3.0 RGU- 80A TBC- 80×67×2.5
                   
85 72 8.0 8.5 13.5 84.4 83.0 3.0 RGU- 85A TBC- 85×72×2.5
90 77 8.0 8.5 13.5 89.4 88.0 3.0 RGU- 90A TBC- 90×77×2.5
100 85 9.0 10.0 16.0 99.4 98.0 4.0 RGU-100A TBC-100×85×3

★Orders and inquiries are accepted on part numbers.


★RGU-Packings and the back-up rings are made-to-order products.
★Packings are adequately packaged for the optimum storage. Refer to “Cautions” in page 2 for the handling and the storage.
★Innovation of the packing profile further improved stability of sealing performance. “A” at the end of part number specifies innovated product.

Related products: SW-Wear rings and PWL-Bearings

36 SAKAGAMI TEL（International DI）:81-3-3625-4283 FAX:81-3-3625-8270

You might also like