Scribd
Upload
84 views

(Infographic) eUDC660 Quick Registration Guide (V100R005C10 - 01)

This quick registration guide provides instructions for batch registering users through importing a registration template in 3 steps: 1. Configure registration templates 2. Download and populate a batch registration template with user details 3. Import the populated template to complete batch registration

Uploaded by

ambroise assemien
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
84 views

(Infographic) eUDC660 Quick Registration Guide (V100R005C10 - 01)

This quick registration guide provides instructions for batch registering users through importing a registration template in 3 steps: 1. Configure registration templates 2. Download and populate a batch registration template with user details 3. Import the populated template to complete batch registration

Uploaded by

ambroise assemien
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

eUDC660 Quick Registration Guide (V100R005C10)

 This quick registration applies only to the fixed single base station scenario. For details, see the product documentation
released with the version.

Preparing Batch Registration Data

Terminal Registration Data Card Registration data

Parameter Example Parameter Example


IMEI 865203940013117 IMSI 460060560400131

Type eUE Authentication 4600608940013119194600608


Key 9400131
Terminal_Template01
Set this parameter to the MSISDN 4010
Template Name template name specified under
Registration > Template/Batch Card_Template01
Import Data > Template. Set this parameter to the
template name specified
Template Name
under Registration >
Template/Batch Import Data
Terminal User Registration Data
> Template.

Parameter Example SIP Password


(applicable only eLTE@com123
User Type Mobile Terminal Users
to 3GPP)

Short Number 4000

Mobile_Terminal_User_Template01 Dispatcher Registration Data


Set this parameter to the template
Template Name name specified under Registration
Parameter Example
> Template/Batch Import Data >
Template. User Type Fixed Terminal Users

User Name Mobile Terminal User01 Short Number 4020

Password eLTE4000 Dispatcher_Template01


Set this parameter to the
template name specified under
Template Name
Group User Registration Data Registration >
Template/Batch Import Data
> Template.
Parameter Example
User Name Dispatcher01
Group Type Static Group
Password eLTE4020
GroupDN 2

Group Priority 15

Max. Duration (s) 60

1/5
Preparing Batch Registration Data

Registration Data for Fixed Camera Users Registration Data for Other Fixed Users

User PSTN is used as an example.


Parameter Example
Parameter Example
User Type Fixed Terminal Users
User Type Fixed Terminal Users
Short Number 4030
Short Number 4040
Fixed_Camera_Template01
PSTN User_Template01
Set this parameter to the template
Set this parameter to the template
Template Name name specified under
Template Name name specified under
Registration > Template/Batch
Registration > Template/Batch
Import Data > Template.
Import Data > Template.

User Name Camera01 User Name PSTN User_01

Password eLTE4030 Password eLTE4040

NOTE
For detailed parameter descriptions, see eUDC660 Product Documentation.

Quick Registration Procedure (Using the B-TrunC R2 Mode as an Example)

1 Log in to the eUDC660 Management System.


• Website address for login: https://eUDC O&M plane IP address:7443/ebs
• Default user name and password: opuser and eLTE@com123

2 Configure the registration template.

NOTE
When filling in the batch registration template (BatchImportTemplete.xls), you need to
enter the name of the registration template; therefore, you must configure the registration
template (including terminal user registration template, card registration template, fixed
user registration template, and terminal registration template) in advance. The following
uses the configuration of a terminal user template as an example.

2/5
Quick Registration Procedure (Using the B-TrunC R2 Mode as an Example)

4
1

3 Download a batch registration template.

2
3/5
Quick Registration Procedure (Using the B-TrunC R2 Mode as an Example)

4 Download a batch registration template.


Open the batch registration template and enable the macro. Configure the template according
to the planning data.

NOTE
• Before filling in the batch registration template (BatchImportTemplete.xls),
read the guidance provided on the Summary sheet.
• Set template name to the name of the registration template created in step 2.

Registering Configure the Create Card sheet.


a card

Registering Configure the Create Group sheet.


a group
Configure the Create User sheet. Set UserType(*) to Mobile Terminal User.
Registering The group to which the user belongs must exist in the system or has been specified on the
a terminal Create Group sheet.
user
Configure the Create User sheet. Set UserType(*) to Fixed Terminal User.
Registering The group to which the user belongs must exist in the system or has been specified on the
a fixed user Create Group sheet.

Registering Configure the Create Terminal sheet.


a terminal

 Registering a card

 Registering a group

4/5
Quick Registration Procedure (Using the B-TrunC R2 Mode as an Example)

 Registering a terminal/fixed user

 Registering a terminal

5 Import the batch registration template. The size of the template cannot exceed
17,588,224 bytes.
NOTE
• If VPN Index with a value other than 65535 is configured for the user in the batch
registration template, log in to the eUDC660 Management System as the VPN
administrator and then import the template.
• Ensure that the PC is not in sleep mode during batch registration. Otherwise, the
registration will be interrupted.

1 3

2
5/5

You might also like