GENERAL INFORMATION

RADIAL TIRE

BIAS TIRE

RIM, VALVE, ORING, FLAP, CONVERSION TABLES

© 2002 Off-The-Road Tire Sale Department, Bridgestone Corporation,

Tokyo, Japan
All rights reserved.
No part of this manual may be reproduced in any form by any electronic or mechanical means,
including information storage and retrieval devices or systems, without prior written permission
from Off-The-Road Tire Sales Department, Bridgestone Corporation, Tokyo, Japan.
Notice: Although great care has been taken in producing this manual, we can accept no responsibility for any loss or
damage resulting from undetected errors or misprints which may have occurred.

Due to the constant advance of tire technology, the contents of this data book are subject to change without notice.

I
CONTENTS
INTRODUCTION .....................................................................................................1
1. Industry Standard ..................................................................................................1
2. Application Vehicle Matching Chart.....................................................................1

GENERAL INFORMATION ...............................................................................2

1. Structural Diagram ................................................................................................2
2. Definitions ..............................................................................................................3
3. Classification .........................................................................................................4
4. Tire Markings .........................................................................................................6

RADIAL TIRE TREAD DESIGNS ................................................................11

APPLICATION OF RADIAL TIRES ............................................................16
• Earthmover Service ...............................................................................................16
• Grader Service........................................................................................................17
• Loader & Dozer Service .........................................................................................18
• High-Speed Service ...............................................................................................19
• Industrial Service ...................................................................................................20
• Sand Service...........................................................................................................20

RADIAL TIRE TECHNICAL DATA ..............................................................21

RADIAL TIRE LOAD AND INFLATION PRESSURE TABLES ....28
• Earthmover Service ...............................................................................................28
• Grader Service........................................................................................................31
• Loader & Dozer Service .........................................................................................32
• High-Speed Service ...............................................................................................35
• Sand Service...........................................................................................................35
• Industrial Service ...................................................................................................36

II
TON-KM-PER-HOUR (TKPH), TON-MILE-PER-HOUR (TMPH) .......37
• TKPH Rating Tables—Radial Tires .......................................................................37
• TMPH Rating Tables—Radial Tires .......................................................................40

BIAS TIRE TREAD DESIGNS .......................................................................44

APPLICATION OF BIAS TIRES ...................................................................48
• Earthmover Service ...............................................................................................48
• Grader Service........................................................................................................49
• Loader & Dozer Service .........................................................................................50
• Compactor Service ................................................................................................52
• Logging Service .....................................................................................................52
• Sand Service...........................................................................................................52
• Industrial Service ...................................................................................................53

BIAS TIRE TECHNICAL DATA .....................................................................54

BIAS TIRE LOAD AND INFLATION PRESSURE TABLES ...........60
• Earthmover Service ...............................................................................................60
• Grader Service........................................................................................................63
• Loader & Dozer Service .........................................................................................64
• Compactor Service ................................................................................................69
• Logging Service .....................................................................................................70
• Sand Service...........................................................................................................71
• Industrial Service ...................................................................................................72

TON-KM-PER-HOUR (TKPH), TON-MILE-PER-HOUR (TMPH) .......74

• TKPH Rating Tables—Bias Tires ..........................................................................74
• TMPH Rating Tables—Bias Tires ..........................................................................75

CONTENTS III
 OTHER SPECIFICATIONS ..............................................................................77
• Flap Specifications ................................................................................................77
• O-Ring Specifications ............................................................................................77
• Rim and Valve .........................................................................................................78

OTHER INFORMATION ....................................................................................84

• Unit Conversion Tables..........................................................................................84
• Specific Weight (Approximately) ..........................................................................87

IV
INTRODUCTION
1. Industry Standard
Bridgestone Corporation has developed a wide range of tire patterns and specifications, so
that the proper Off-the-Road tire can be matched to any vehicle, service, or operating
conditions.
Bridgestone’s Off-the-Road tires are designed and produced to meet the commonly accepted
international standards, those set by the TRA (Tire and Rim Association) in the U.S.A., by the
ETRTO (European Tire and Rim Technical Organization) in Europe and/or by the JATMA (Japan
Automobile Tire Manufacturers’ Association) in Japan*.
Load capacities, inflation pressures, dimensions such as overall tire diameter and width, as
well as the relative rims and tube valves follow these standards.
If a tire is to be used for a purpose other than that for which it is originally intended, please
consult Bridgestone Corporation for advice.

*Where differences exist between the TRA, ETRTO and JATMA standards,
Bridgestone selects the most applicable.
Details will be provided upon request.

2. Application Vehicle Matching Chart

APPLICATION VEHICLE
Dump Trucks, Motor Scrapers, Articulated Dump Trucks,
Earthmover Service
Coal Haulers, Logging Trucks, Other Mining Trucks, etc.
Grader Service Motor Graders
Shovels, Front-End Loaders, Back-hoe Loaders, Skid Steer
Loader & Dozer Service
Loaders, Dozers, Shuttle Trucks, Load-Haul-Dumps, etc.
High-Speed Service All-Terrain Cranes, High-Speed Vehicles,etc.
Straddle Carriers, Aircraft Towing Tractors, Container Stackers,
Industrial Service
Counter-balanced Lift Trucks, Mobile Crushers, Log Stackers, etc.
Logging Service Log-Skidders
Compactor Service Compactor, Road Rollers
Sand Service Sand Service Trucks

INTRODUCTION 1
GENERAL INFORMATION
1. Structural Diagram

Off-The-Road Radial Tire (ORR)

Belt
Tread

Casing Ply

Chafer

Off-The-Road Bias Tire (ORS)

Inner Liner

Bead Wire

Breaker

Carcass

Chafer

2
2. Definitions
2.1 Tire Size 2.4 Overall Width (OW)
The size of each tire is indicated by nominal width and “Overall Width” is the width of a new tire, including 24-
rim diameter in inches and mm. hour inflation growth, and including protective side ribs,
Radial structure is indicated by the letter “R”. For some bars or decorations.
tire the aspect ratio is indicated by percentage.

Example
2.5 Section Width (SW)
Radial Tire ; 40.00R57, 33.25R35, 445/95R25 “Section Width” is the width of a new tire, including 24-
Bias Tire ; 30.00-51, 45/65-45 hour inflation growth and including normal sidewalls, but
not including protective side ribs, bars, or decorations.

2.2 Star Rating, Ply Rating and 2.6 Static Loaded Radius and
Load Index Width (SLR, SLW)
The load capacity of a tire is indicated by the star “Static Loaded Radius” is the shortest distance from the
rating (in case of radial tire) and the ply rating (in case axle center to the contact surface of a tire and “Static
of bias tire). Loaded Width” is the overall width of a tire, mounted on
The load index is applied in countries where the the approved rim at the specified inflation pressure and
ETRTO standards are used. placed still and vertically on a flat board, and loaded with
the specified load.
2.3 Overall Diameter (OD)
“Overall Diameter” is twice the section height of a new
2.7 Original Tread Depth (OTD)
tire, plus the nominal rim diameter, including 24-hour “Original Tread Depth” is the tread depth of a new tire
inflation growth. measured at the point of tread-indicator where available
or one-fourth the width of the tire crown section from the
crown center, including 24-hour inflation growth.

Overall Width (OW)

Section Width (SW)
Tread Width

Section
Height
(SH)
Free
Radius
Rim Flange Height

Rim Width

Overall Nominal Rim

Diameter Diameter
(OD)
Dual
Spacing

Static Loaded
Radius
(SLR)

Static Loaded
Width
(SLW)

GENERAL INFORMATION 3
 3. Classification
3.1 Uses and Characteristics of Off-The-Road Tires
The characteristics which Off-The-Road tires must possess differ somewhat according to the function they must serve
and the type of vehicles on which they are mounted.

Type/Service Function Vehicles Main tire characteristics

required

Dump trucks

Articulated dump trucks Heat-resistance,

Earthmover Transporting Cut-resistance,
Coal haulers
Wear-resistance,
Shock burst-resistance
Scrapers

Trucks

Traction,
Grader Grading, Leveling Maneuverability,
Graders
(directional stability)

Cut-resistance,
Loader and Loading and
Shovels, Loaders, Bulldozers Wear-resistance
dozer dozing
Stability
LHD
Heat-resistance,
High-speed
High-speed Wear-resistance,
Travelling
Traction
All-Terrain Cranes

Uneven wear,
Industrial Handling & Towing Wear-resistance,
Stability
Handling & Towing Equipment

Oil-resistance,
Compactor Compacting Cut-resistance,
Tire-rollers
Wear-resistance

Traction, Flotation,
Logging Log-skidding
Cut-resistance
Log-skidders

4
3.2 TRA Classification and Corresponding Bridgestone Off-The-Road
Tires
Off-The-Road tires are classified by the TRA as follows, and the names of the tread patterns of the corresponding
Bridgestone Off-The-Road tires are described below.

Bridgestone Tread Pattern

TRA Classification Tread Type
Radial Bias
E= Earthmover (Haulage Service)
E-1 Rib
E-2 Traction VHS VSB VKT VFT VSW
E-3 Rock VEL VRL VLT VMT RL WL VL2
E-4 Rock Deep VALS VLTS VSNT L317 RLS ELS2
VMTS VMTP VZTS VRDP
VRLS VELSL VELS
E-7 Flotation VSJ AL SCP2
G=Grader
G-1 Rib RG
G-2 Traction VUT VKT VSW FG GL
G-3 Rock RL
G-4 Rock Deep RLS
L=Loader & Dozer (Slow Speed Service)
L-2 Traction VUT VKT VSW FG GL VG
L-3 Rock VTS VLT VMT RL VL2
L-4 Rock Deep VALS VLTS VSNT RLS RLS2 NL
L-4S Smooth Deep STM
L-5 Rock Extra-Deep VSDL VSDT DL MLS DL2
L-5S Smooth Extra-Deep VSMS STMS
C=Compactor Service
C-1 Smooth RR
C-2 Grooved AL2
LS=Logging Service
LS-2 Intermediate TGS FG
High-Speed Service
High-Speed Service VHS VHB VSB VGT VKT VSW
Industrial Service
Industrial Service VCH VRLS VCHD VEL VL2 RL RLS ELS2 STMS YS2
VCHS VSDL VSMS

Design Tread-Depth
100% 150% 250%

Regular Tread Deep Tread Extra Deep Tread

E-2/E-3 E-4
L-2/L-3 L-4/L-4S L-5/L-5S
G-2/G-3 G-4

GENERAL INFORMATION 5
 4 Tire Markings ①
(ORR)
① Brand Name

② Bridgestone’s Specifications Code

③ Pattern Name

④ Serial Number

⑤ ② ⑤ Tire Size, Star Rating,Tubeless or Tube Type

4.1 Type of Tire Size Designation

Regular 27.00 R 49 Tire Aspect Ratio
Star Rating
Rim Diameter (inches)
Radial Structure
Section Width (inches)

SH = 0.95
Wide Base 33.25 R 35 SW
Star Rating
Rim Diameter (inches)
Radial Structure
Section Width (inches)

SH = 0.80
Super Wide Base 40 / 65 - 39 30PR SW
Ply Rating
Rim Diameter (inches)
Aspect Ratio 65 Series
Section Width (inches) SH = 0.65
SW
SH, SW：See Page 3
170 E 385 / 95 R 24
Rim Diameter (inches)
Radial Structure
Aspect Ratio 95 Series
Section Width (mm)
Speed Symbol
Load Index

6
4.2 Type of Tire Structures Classified by Service and Designated by
Bridgestone
Each Bridgestone tire has a Bridgestone code number on the tire sidewall according to its specifications.

OFF THE R OA D OFF THE R OA D OFF THE R OA D

E A R T H M OV I N G L OA D E R
& DOZER GRADER
TYPE 2-A TYPE 2-A TYPE 2-A
E S I S TA N T E S I S TA N T E S I S TA N T
CUT R CUT R CUT R
For For For
Earthmover service Loader and Dozer service Grader service

OFF THE R OA D OFF THE R OA D

AND
IAL SERVICE
INDUSTR WHEEL
CRANE USE

For For
Industrial service High-Speed Service

Tire Structures Classified by Type of Service and Bridgestone’s

Designations
Service
Service BS Code
BS Code No.
No. Structure
Structure
1A Standard
Earthmover Service (E) 2A Cut-resistant
3A Heat-resistant
1A Standard
Grader Service (G)
2A Cut-resistant
2A Cut-resistant
Loader & Dozer Service (D) 2V★ Special cut-resistant (Type“V”)
2Z★ Special cut-resistant (Type“Z”)
Logging Service (S) 2V ★★
Standard
NOTES: ★Bias Tire Only
★★
2V tires are standard for log skidder service since the possibility of the cutting is high in log skidder operations.

Steel Breaker Tire

D 2A
Type V Type Z
A: Standard
V: Cut-resistant type “V”
Structure: (Steel Breaker)
Z: Cut-resistant type “Z”
(Side Steel Breaker)
1: Standard
Characteristics: 2: Cut-resistant
3: Heat-resistant
E: Earthmover Steel breaker Side steel breaker
Type of Service: G: Grader construction construction
D: Loader & Dozer
S: Logging Steel Breaker Bias Tire
Steel Breaker Off-the-Road tires feature breaker material which is
changed from nylon to steel in order to resist cutting and cut bursting.
Bridgestone Steel Breaker Off-the-Road tires are widely used on loaders
at mining and quarry sites, loaders and shuttle trucks in underground
mines, and also on log loaders.

Side Steel Breaker Bias Tire

In this tire the steel breaker extends to the sidewall of the tire to protect
it against damage. The construction is similar to that described above.

GENERAL INFORMATION 7
 4.3 Load Index
The LOAD INDEX is a international numerical code associated with the maximum load a tire can carry at the speed
indicated by its Speed Symbol under service conditions specified by Bridgestone.

LI kg LI kg LI kg LI kg LI kg LI kg
0 45 50 190 100 800 150 3 350 200 14 000 250 60 000
1 46.2 51 195 101 825 151 3 450 201 14 500 251 61 500
2 47.5 52 200 102 850 152 3 550 202 15 000 252 63 000
3 48.7 53 206 103 875 153 3 650 203 15 500 253 65 000
4 50 54 212 104 900 154 3 750 204 16 000 254 67 000
5 51.5 55 218 105 925 155 3 875 205 16 500 255 69 000
6 53 56 224 106 950 156 4 000 206 17 000 256 71 000
7 54.5 57 230 107 975 157 4 125 207 17 500 257 73 000
8 56 58 236 108 1 000 158 4 250 208 18 000 258 75 000
9 58 59 243 109 1 030 159 4 375 209 18 500 259 77 500

10 60 60 250 110 1 060 160 4 500 210 19 000 260 80 000

11 61.5 61 257 111 1 090 161 4 625 211 19 500 261 82 500
12 63 62 265 112 1 120 162 4 750 212 20 000 262 85 000
13 65 63 272 113 1 150 163 4 875 213 20 600 263 87 500
14 67 64 280 114 1 180 164 5 000 214 21 200 264 90 000
15 69 65 290 115 1 215 165 5 150 215 21 800 265 92 500
16 71 66 300 116 1 250 166 5 300 216 22 400 266 95 000
17 73 67 307 117 1 285 167 5 450 217 23 000 267 97 500
18 75 68 315 118 1 320 168 5 600 218 23 600 268 100 000
19 77.5 69 325 119 1 360 169 5 800 219 24 300 269 103 000

20 80 70 335 120 1 400 170 6 000 220 25 000 270 106 000
21 82.5 71 345 121 1 450 171 6 150 221 25 750 271 109 000
22 85 72 355 122 1 500 172 6 300 222 26 500 272 112 000
23 87.5 73 365 123 1 550 173 6 500 223 27 250 273 115 000
24 90 74 375 124 1 600 174 6 700 224 28 000 274 118 000
25 92.5 75 387 125 1 650 175 6 900 225 29 000 275 121 000
26 95 76 400 126 1 700 176 7 100 226 30 000 276 125 000
27 97 77 412 127 1 750 177 7 300 227 30 750 277 128 000
28 100 78 425 128 1 800 178 7 500 228 31 500 278 132 500
29 103 79 437 129 1 850 179 7 750 229 32 500 279 136 000

30 106 80 450 130 1 900 180 8 000 230 33 500

31 109 81 462 131 1 950 181 8 250 231 34 500
32 112 82 475 132 2 000 182 8 500 232 35 500
33 115 83 487 133 2 060 183 8 750 233 36 500
34 118 84 500 134 2 120 184 9 000 234 37 500
35 121 85 515 135 2 180 185 9 250 235 38 750
36 125 86 530 136 2 240 186 9 500 236 40 000
37 128 87 545 137 2 300 187 9 750 237 41 250
38 132 88 560 138 2 360 188 10 000 238 42 500
39 136 89 580 139 2 430 189 10 300 239 43 750

40 140 90 600 140 2 500 190 10 600 240 45 000

41 145 91 615 141 2 575 191 10 900 241 46 250
42 150 92 630 142 2 650 192 11 200 242 47 500
43 155 93 650 143 2 725 193 11 500 243 48 750
44 160 94 670 144 2 800 194 11 800 244 50 000
45 165 95 690 145 2 900 195 12 150 245 51 500
46 170 96 710 146 3 000 196 12 500 246 53 000
47 175 97 730 147 3 075 197 12 850 247 54 500
48 180 98 750 148 3 150 198 13 200 248 56 000
49 185 99 775 149 3 250 199 13 600 249 58 000

8
4.4 Speed Symbol
The SPEED SYMBOL indicates the speed at which the tire can carry a load corresponding to its Load Index under
service conditions specified by Bridgestone.

Speed Symbol Speed (km/h) Speed Symbol Speed (km/h)

A1 5 B 50
A2 10
A3 15 C 60
A4 20 D 65
A5 25 E 70
A6 30
F 80
A7 35
A8 40 G 90

4.5 Conversion Table: Star Rating to Ply Rating

Star Corresponding Star Corresponding
Service Tire Size Service Tire Size
Rating Ply Rating Rating Ply Rating
Grader ★ Earthmover ★★
14.00R24 up to 16 26.5R25 up to 32
16.00R24 ★ ★★
up to 16 29.5R25 up to 34
17.5R25 ★ ★★
up to 16 29.5R29 up to 40
12.00R24 ★★★ ★★
Earthmover up to 24 33.25R29 up to 44
14.00R24 ★★★ ★★
up to 32 33.5R33 up to 44
14.00R25 ★★★ ★★
up to 32 37.5R33 up to 48
16.00R25 ★★ ★★
up to 36 33.25R35 up to 44
18.00R25 ★ ★★
up to 24 37.25R35 up to 48
★★ ★★
up to 36 37.5R39 up to 52
18.00R33 ★★ up to 40 40.5/75R39 ★★ up to 54
21.00R33 ★★ ★
up to 36 Loader 15.5R25 up to 16
21.00R35 ★★ ★
up to 44 17.5R25 up to 16
24.00R35 ★★ up to 48 20.5R25 ★ up to 24
24.00R49 ★★ ★★
up to 48 up to 28
27.00R49 ★★ ★
up to 54 23.5R25 up to 24
30.00R51 ★★ ★★
up to 58 up to 32
33.00R51 ★★ ★
up to 64 26.5R25 up to 24
36.00R51 ★★ ★★
up to 66 up to 36
40.00R57 ★★ up to 74 29.5R25 ★ up to 28
17.5R25 ★ ★★
up to 16 up to 34
20.5R25 ★ ★
up to 24 29.5R29 up to 34
★★ up to 28 35/65R33 ★ up to 36
25/65R25 ★★ up to 32 45/65R45 ★ up to 50
23.5R25 ★ up to 24
★★
up to 32

Note: Due to the practice of altering inflation pressure to improve flotation on sand, Bridgestone dose not apply a star
rating to tire size 21.00R25 VSJ.

GENERAL INFORMATION 9
 4.6 Size Conversion Table

Metric Inch

385/95R24, 25 14.00R24, 25
445/95R24, 25 16.00R24, 25
445/80R25 17.5R25
505/95R25 18.00R25
525/80R25 20.5R25
750/65R25 30/65R25

4.7 Dual Specification Codes

Some Bridgestone Off-The-Road Tires have dual specification codes which can be used for both services.

Combination Construction Size Designation

26.5R25 MS* VLT T DE2

Radial *1 D2A
Loader & Dozer Service
*2 E2A
+
Earthmover Service 26.5 – 25 20 VL2 T DE2
Bias D2A
E2A

Loader & Dozer Service 17.5 – 25 12 FG T DG2

+ Bias D2A
Grader Service G2A

Earthmover Service 17.5R25 ✽1 VKT T EG2

+ Radial E2A
Grader Service G2A

✽ Multiple Star Rating

Bridgestone Radial Tires marked with “LOADER & DOZER ★(one star)” and “EARTHMOVER ★★(two star)”
have specified load capacity on each servicing condition.
Strength of tire casing is designed to constrain inflation pressure used.
<26.5R25 as an example>
Type of Service Star Rating Inflation Load Speed
Pressure (Load Index) (Speed Symbol)
Loader ★(one star) 5.25 bar 15,000 kgs 10 km/hour
(202) (A2)
Earthmover ★★(two stars) 5.00 bar 11,500 kgs 50 km/hour
(190) (B)

Description on Tire Sidewall

10
RADIAL TIRE TREAD DESIGNS
■Earthmover Service
E2

V-STEEL V-STEEL V-STEEL V-STEEL

HIGHWAY SERVICE S-BLOCK K-TRACTION F-TRACTION
(VHS) (VSB) (VKT) (VFT)

E2 E3

V-STEEL V-STEEL Wide Base Regular

SNOW WEDGE E-LUG V-STEEL R-LUG
(VSW) (VEL) (VRL)

E3

V-STEEL Wide Base Regular

L-TRACTION V-STEEL M-TRACTION
(VLT) (VMT)

RADIAL TIRE TREAD DESIGNS 11

 E4

V-STEEL V-STEEL V-STEEL L317

A-LUG S L-TRACTION S N-TRACTION
(VALS) (VLTS) (VSNT)

E4

V-STEEL V-STEEL V-STEEL V-STEEL

M-TRACTION S M-TRACTION Z-TRACTION S ROCK DEEP
(VMTS) PREMIUM (VMTP) (VZTS) PREMIUM (VRDP)

E4

1400R24~1600R25 2100R33~3700R57 53/80R63, 55/80R63 3700R57, 53/80R63

V-STEEL R-LUG S (VRLS)

12
 E4

3700R57 1800R25~ 4000R57 31/90R49 59/80R63

4000R57 2100R35 50/90R57 46/90R57
VELSL V-STEEL E-LUG S (VELS)

■ Grader Service
G2

V-STEEL V-STEEL V-STEEL

U-TRACTION K-TRACTION SNOW WEDGE
(VUT) (VKT) (VSW)

■ Loader & Dozer Service

L2

V-STEEL V-STEEL V-STEEL

U-TRACTION K-TRACTION SNOW WEDGE
(VUT) (VKT) (VSW)

RADIAL TIRE TREAD DESIGNS 13

 L3

V-STEEL V-STEEL V-STEEL

TRACTION-STABILITY M-TRACTION L-TRACTION
(VTS) (VMT) (VLT)

L4 L5

V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL

A-LUG S L-TRACTION-S N-TRACTION SUPER-DEEP D-LUG
(VALS) (VLTS) (VSNT) TRACTION (VSDT) (VSDL)

■ High-Speed Service
L5S

V-STEEL SMOOTH V-STEEL V-STEEL V-STEEL

TREAD-MS HIGHWAY SERVICE H-BLOCK S-BLOCK
(VSMS) (VHS) (VHB) (VSB)

14
 ■ Sand Service
E7

V-STEEL V-STEEL V-STEEL V-STEEL

G-TRACTION K-TRACTION SNOW WEDGE JAMAL
(VGT) (VKT) (VSW) (VSJ)

■ Industrial Service

V-STEEL V-STEEL V-STEEL V-STEEL

CONTAINER HANDLER R-LUG S CONTAINER HANDLER DEEP E-LUG
(VCH) (VRLS) (VCHD) (VEL)

V-STEEL V-STEEL V-STEEL

CONTAINER HANDLER SS SMOOTH TREAD MS D-LUG
(VCHS) (VSMS) (VSDL)

RADIAL TIRE TREAD DESIGNS 15

APPLICATION OF RADIAL TIRES
■ Earthmover Service
HEAT RESISTANT CUT RESISTANT

VLT

VSW VMTP VLTS

TRACTION
VFT VKT
VSNT
VMT L317 VMTS
VSB
VZTS
VALS
VRL VRLS
VEL VELSL VRDP
VHS
VELS

Size Type Star Rating Size Type Star Rating Size Type Star Rating

VKT(E2) VRL(E3) VSNT(E4)

14.00 R 24 T/T ★3 33.25 R 29 T/L ★2 26.5 R 25 T/L MS
14.00 R 24 TG T/L ★3 29.5 R 35 T/L ★2 29.5 R 25 T/L MS
17.5 R 25 T/L ★1 33.25 R 35 T/L ★2 29.5 R 29 T/L MS
18.00 R 25 T/L ★1★2 37.25 R 35 T/L ★2 35/65 R 33 T/L MS
20.5 R 25 T/L ★1★2 37.5 R 39 T/L ★2
VRLS(E4)
23.5 R 25 T/L ★1★2 40.5/75 R 39 T/L ★2
14.00 R 24 T/T ★3
25/65 R 25 T/L ★2 27.00 R 49 T/L ★2
14.00 R 25 T/L ★3
26.5 R 25 T/L ★2 VEL(E3) 16.00 R 25 T/L ★2
29.5 R 25 T/L ★2 18.00 R 25 T/L ★2 21.00 R 33 T/L ★2
29.5 R 29 T/L ★2 18.00 R 33 T/L ★2 21.00 R 33 T/T ★2
33.25 R 29 T/L ★2 21.00 R 35 T/L ★2 24.00 R 35 T/L ★2
33.5 R 33 T/L ★2 24.00 R 35 T/L ★2 24.00 R 49 T/L ★2
37.5 R 33 T/L ★2
L317(E4) 27.00 R 49 T/L ★2
33.25 R 35 T/L ★2
★3 30.00 R 51 T/L ★2
37.25 R 35 T/L ★2 11.00 R 20 T/T
★3 33.00 R 51 T/L ★2
37.5 R 39 T/L ★2 12.00 R 20 T/T
12 R 22.5 T/L ★3 36.00 R 51 T/L ★2
VFT(E2)
12.00 R 24 T/T ★3 37.00 R 57 T/L ★2
18.00 R 33 T/L ★2 53/80 R 63 T/L ★2
24.00 R 49 T/L ★2 VMTS(E4) 55/80 R 63 T/L ★2
27.00 R 49 T/L ★2 14.00 R 24 T/T ★3
14.00 R 25 T/L ★3 VELS(E4)
VSB(E2) 18.00 R 25 T/L ★2
16.00 R 25 T/L ★2
14.00 R 24 T/T ★3 18.00 R 33 T/L ★2
18.00 R 25 T/L ★2
14.00 R 25 T/L ★3 21.00 R 35 T/L ★2
18.00 R 33 T/L ★2
31/90 R 49 T/L ★2
❋ VSW(E2) 21.00 R 35 T/L ★2
40.00 R 57 T/L ★2
20.5 R 25 T/L MS (★2) 24.00 R 35 T/L ★2
46/90 R 57 T/L ★2
23.5 R 25 T/L MS (★2) 24.00 R 49 T/L ★2
50/90 R 57 T/L ★2
27.00 R 49 T/L ★2
VHS(E2) NEW 59/80 R 63 T/L ★2
33.00 R 51 T/L ★2
30.00 R 51 T/L ★2 VELSL(E4)
VMTP(E4)
VLT(E3) 18.00 R 33 T/L ★2 NEW 37.00 R 57 T/L ★2
21.00 R 35 T/L ★2 NEW 40.00 R 57 T/L ★2
750/65(30/65) R 25 T/L MS (★2)
20.5 R 25 T/L MS (★2) 24.00 R 35 T/L ★2 VZTS(E4)
23.5 R 25 T/L MS (★2) 24.00 R 49 T/L ★2 37.00 R 57 T/L ★2
26.5 R 25 T/L MS (★2) 27.00 R 49 T/L ★2 40.00 R 57 T/L ★2
29.5 R 25 T/L MS (★2) 33.00 R 51 T/L ★2
VALS(E4) VRDP(E4)
VMT(E3) NEW 46/90 R 57 T/L ★2
17.5 R 25 T/L ★2 20.5 R 25 T/L ★2
23.5 R 25 T/L ★2 NEW 40.00 R 57 T/L ★2
20.5 R 25 T/L ★2 NEW 42/90 R 57 * T/L ★2
23.5 R 25 T/L ★1★2 VLTS(E4)
26.5 R 25 T/L ★2 20.5 R 25 T/L ★2
29.5 R 25 T/L ★2 23.5 R 25 T/L ★1★2 T/T: Tube Type
30.00 R 51 T/L ★2 26.5 R 25 T/L ★2 T/L: Tubeless Type
33.00 R 51 T/L ★2 29.5 R 25 T/L ★2 MS: Multiple Star Rating
36.00 R 51 T/L ★2
40.00 R 57 T/L ★2 * in preparation
❋ VSW is especially designed for snow surface operations.

16
■ Grader Service
HEAT RESISTANT CUT RESISTANT

VUT
VSW
VKT

TRACTION
Size Type Star Rating

VUT(G2)
13.00R 24 TG T/T ★1
13.00R 24 TG T/L ★1
14.00R 24 TG T/L ★1
15.5 R 25 T/L ★1
17.5 R 25 T/L ★1
20.5 R 25 T/L ★1
23.5 R 25 T/L ★1

❋ VSW(G2)
14.00 R 24 TG T/L ★1★3
16.00 R 24 TG T/L ★1
17.5 R 25 T/L ★1

VKT(G2)
14.00 R 24 TG T/L ★1
16.00 R 24 TG T/L ★1
17.5 R 25 T/L ★1
20.5 R 25 T/L ★1

❋ VSW is especially designed for snow surface operations.

T/T: Tube Type

T/L: Tubeless Type
TG: For Semi-Drop Center Rim

APPLICATION OF RADIAL TIRES 17

 ■ Loader & Dozer Service
HEAT RESISTANT CUT RESISTANT

VUT VLT VLTS

TRACTION
VSW
VKT VSNT VSDT
VTS VMT

VALS
VSDL
VSMS

Size Type Star Rating Size Type Star Rating Size Type Star Rating

VUT(L2) VMT(L3) VSDT(L5)

335/80 R 20 T/L 17.5 R 25 T/L ★1★2 23.5 R 25 T/L ★1★2
365/80 R 20 T/L 20.5 R 25 T/L ★1 26.5 R 25 T/L ★1★2
405/70 R 20 T/L 23.5 R 25 T/L ★1★2 29.5 R 25 T/L ★1★2
15.5 R 25 T/L ★1★2 26.5 R 25 T/L ★1★2 29.5 R 29 T/L ★1★2
17.5 R 25 T/L ★1 29.5 R 25 T/L ★1 35/65 R 33 T/L ★1
20.5 R 25 T/L ★1 VSDL(L5)
23.5 R 25 T/L ★1 VTS(L3)
650/65 R 25 T/L ★1 8.25 R 15 T/T ★2
VKT(L2) 10.00 R 15 T/T ★2
775/65 R 29 T/L ★1
14.00 R 24 TG T/L ★1 14.5 R 15 T/L ★2
15.5 R 25 T/L ★1 875/65 R 29 T/L ★1
12.00 R 20 T/T ★2
17.5 R 25 T/L ★1★2 VALS(L4) *14.00 R 20 T/T ★2
20.5 R 25 T/L ★1★2 20.5 R 25 T/L ★1 17.5 R 25 T/L ★1★2
23.5 R 25 T/L ★1★2 23.5 R 25 T/L ★1 20.5 R 25 T/L ★1★2
26.5 R 25 T/L ★1★2 23.5 R 25 T/L ★1★2
VSNT(L4) 26.5 R 25 T/L ★1★2
❋ VSW(L2)
26.5 R 25 T/L MS 29.5 R 25 T/L ★1★2
14.00 R 24 TG T/L ★1★3
29.5 R 25 T/L MS 29.5 R 29 T/L ★1★2
20.5 R 25 T/L MS(★1)
23.5 R 25 T/L MS(★1) 29.5 R 29 T/L MS 35/65 R 33 T/L ★1
35/65 R 33 T/L MS 45/65 R 39 T/L ★1
VLT(L3)
45/65 R 45 T/L ★1★2
750/65 (30/65) R 25 T/L MS(★1) VLTS(L4)
55.5/80 R 57 T/L
20.5 R 25 T/L MS(★1) 29.5 R 25 T/L ★1
VSMS(L5S) * VSNL
23.5 R 25 T/L MS(★1)
26.5 R 25 T/L MS(★1) 9.00 R 20 T/T ★2
29.5 R 25 T/L MS(★1) 12.00 R 20 T/T ★2
12.00 R 24 T/T ★2
17.5 R 25 T/L ★1★2
❋ VSW is especially designed for snow surface operations. 18.00 R 25 T/L ★1★2
T/T: Tube Type MS: Multiple Star Rating 26.5 R 25 T/L ★1★2
T/L: Tubeless Type TG: For Semi-Drop Center Rim 29.5 R 29 T/L ★1★2

18
■ High-Speed Service
ON ROAD OFF ROAD

VKT

VGT

TRACTION
VSB

VHB

VSW VHS

Size Type Star Rating Size Type Star Rating Size Type Star Rating

VSB VHS VGT

170E 385/95 R 24 170E 385/95 R 24 24 R 21 T/L ★1
T/T T/T ★3
(14.00R24) (14.00R24) 170E 445/80 R 25
T/L ★2
170E 385/95 R 25 170E 385/95 R 25 (17.5R25)
T/L T/L ★3
(14.00R25) (14.00R25)
VKT
177E 445/95 R 25
VHB T/L ★2 177E 445/95 R 25
(16.00R25) T/L ★2
170E 385/95 R 24 (16.00R25)
T/T ★3 186E 505/95 R 25
(14.00R24) T/L ★2 179E 525/80 R 25
(18.00R25) T/L ★2
177E 445/95 R 25 (20.5R25)
T/L ★2 179E 525/80 R 25
(16.00R25) T/L ★2
(20.5R25)
186E 505/95 R 25
T/L ★2
(18.00R25)
179E 525/80 R 25
T/L ★2
(20.5R25)

❋ VSW
170E 385/95 R 25
T/L
(14.00R25)
177E 445/95 R 25
T/L
(16.00R25)

❋ VSW is especially designed for snow surface operations.

T/T: Tube Type

T/L: Tubeless Type

APPLICATION OF RADIAL TIRES 19

 ■ Industrial Service

VCH VSMS
VCH VSMS
12.00 R 20 T/T ★3 18.00 R 25 T/L ★2
12.00 R 24 T/T ★2
14.00 R 24 TG T/L ★3
14.00 R 24 T/T ★3

VCHD VSDL
VCHD VSDL
16.00 R 25 T/L ★2 23.5 R 25 T/L ★2

VCHS VRLS
VCHS VRLS
NEW 14.00 R 24 * T/T ★3 16.00 R 25 T/L ★2
18.00 R 25 T/L ★3
18.00 R 33 T/L ★3
* in preparation

VEL
VEL
18.00 R 25 T/L ★3

■ Sand Service

VSJ
VSJ
16.00 R 20 T/T 28
21.00 R 25 T/L

20
 RADIAL TIRE TECHNICAL DATA Approximate Inflated Dimensions Minimum
TRA Code Recommended
Load Index/ Star Dual Spacing
Tire Size or Pattern Rating Type Rim/ OD OW SLR SLW OTD
Speed Symbol
Application Flange Height (inch) inch mm inch mm inch mm inch mm mm inch mm
14.5R15 L5 VSDL ★2 T/L 11.00/1.5 35.4 899 14.1 359 16.3 413 16.2 412 48.0 - -
8.25R15 L5 VSDL ★2 T/T 6.50T 34.6 880 9.8 248 15.9 405 11.2 285 48.0 - -
10.00R15 L5 VSDL ★2 T/T 7.50V 35.6 905 11.3 287 16.4 416 13.0 330 48.0 - -
9.00R20 L5S VSMS ★2 T/T 7.00T 41.5 1054 10.2 260 18.7 474 11.9 303 51.0 - -
11.00R20 E4 L317 ★3 T/T 8.00V 43.6 1107 11.4 290 20.2 512 12.8 325 25.0 13.2 335
12.00R20 E4 L317 ★3 T/T 8.50V 45.1 1146 12.1 308 20.6 523 13.6 346 25.0 15.1 384
L5 VSDL ★2 T/T 8.50V 46.0 1168 12.6 320 21.2 538 14.1 359 57.0 - -
L5S VSMS ★2 T/T 8.50V 46.2 1173 12.3 312 21.3 540 13.8 351 57.0 - -
Industrial Service VCH ★3 T/T 8.50V 45.0 1142 12.4 316 20.2 512 14.2 360 29.5 15.0 380
14.00R20 L4 VSNL ★2 T/T 10.00WI 47.1 1196 14.2 360 21.7 550 16.3 414 34.0 - -
16.00R20 E7 VSJ 28 T/T 10.00W 51.8 1315 16.3 414 23.2 590 18.7 475 18.5 20.5 520
335/80R20 147A2/136B L2 E2 VUT T/L 11X20 40.8 1036 12.6 319 13.8 351 19.2 487 19.0 - -
365/80R20 153A2/141B L2 E2 VUT T/L 11X20 42.8 1087 13.7 347 15.3 388 20.1 511 21.0 - -
405/70R20 155A2/143B L2 E2 VUT T/L 13X20 43.0 1092 15.7 398 17.7 449 20.2 514 20.0 - -
24R21 High-Speed Service VGT ★1 T/L 18.00/1.5 54.3 1380 23.7 601 24.5 623 25.5 647 24.5 - -
12R22.5 E4 L317 ★3 T/L 9.00 43.7 1109 11.5 292 20.4 517 12.9 327 25.0 13.5 343
12.00R24 E4 L317 ★3 T/T 8.50V 49.4 1255 12.6 319 21.7 552 14.6 371 31.5 15.4 391
L5S VSMS ★2 T/T 8.50V 50.2 1275 12.3 312 22.6 573 14.3 364 57.0 - -
Industrial Service VCH ★2 T/T 8.50V 49.4 1254 12.7 323 22.0 558 14.8 376 29.5 - -
13.00R24 TG G2 VUT ★1 T/L(T/T) 8.00TG 50.8 1290 14.1 357 23.0 585 15.0 380 25.0 - -
RADIAL TIRE TECHNICAL DATA 21

14.00R24 TG G2 L2 VSW ★1★3 T/L 8.00TG 53.2 1351 14.6 370 23.4 594 16.8 426 23.5 - -
G2 VUT ★1 T/L 8.00TG 53.3 1354 15.5 393 23.5 596 16.5 420 25.5 - -
G2 L2 E2 VKT ★1★3 T/L 8.00TG 53.2 1351 15.4 390 24.1 612 16.6 422 25.0 - -
Industrial Service VCH ★3 T/L 10.00VA 54.8 1393 15.4 390 26.0 660 18.1 460 32.0 - -
T/T: Tube Type T/L: Tubeless Type TG: For Semi-Drop Center Rim
22

TRA Code Recommended Approximate Inflated Dimensions Minimum

Load Index/ Star Dual Spacing
Tire Size or Pattern Rating Type Rim/ OD OW SLR SLW OTD
Speed Symbol
Application Flange Height (inch) inch mm inch mm inch mm inch mm mm inch mm
14.00R24 E2 VSB ★3 T/T 10.00W 53.7 1365 15.4 390 25.0 635 16.7 425 21.0 17.7 450
E2 VKT ★3 T/T 10.00W 53.2 1351 15.2 386 24.1 612 17.4 442 25.0 17.7 450
E2 VHB ★3 T/T 10.00W 53.4 1357 15.0 382 24.8 630 16.1 410 23.5 17.7 450
E4 VMTS ★3 T/T 10.00W 55.1 1400 15.2 386 25.3 642 16.9 428 38.0 17.7 450
E4 VRLS ★3 T/T 10.00W 55.2 1403 15.4 390 25.4 644 17.0 432 39.0 17.7 450
Industrial Service VCH ★3 T/T 10.00W 54.8 1393 15.4 390 24.0 610 18.1 460 33.0 18.9 480
NEW Industrial Service VCHS* ★3 T/T 10.00W (55.7) (1415) (15.1) (383) - - - - (63.0) - -
385/95R24 170E High-Speed Service VHS ★3 T/T 10.00W 53.4 1356 15.0 382 24.6 626 16.6 421 23.0 17.7 450
(14.00R24) 170E High-Speed Service VHB ★3 T/T 10.00W 53.4 1357 15.0 382 24.8 630 16.1 410 23.5 17.7 450
170E High-Speed Service VSB T/T 10.00W 53.7 1365 15.4 390 25.0 635 16.7 425 21.0 17.7 450
16.00R24 TG G2 VSW ★1 T/L 10.00VA 58.5 1485 16.4 417 26.8 680 18.4 467 22.5 - -
G2 VKT ★1 T/L 10.00VA 58.0 1473 16.5 418 26.6 675 18.5 470 28.5 - -
14.00R25 E2 VSB ★3 T/L 10.00/1.5 53.7 1365 15.4 390 25.0 635 16.7 425 21.0 17.7 450
E4 VMTS ★3 T/L 10.00/1.5 55.4 1406 15.3 389 25.6 650 17.1 435 38.0 17.7 450
E4 VRLS ★3 T/L 10.00/1.5 55.2 1403 15.3 389 25.6 650 17.1 435 39.0 17.7 450
385/95R25 170E High-Speed Service VSW T/L 10.00/1.5 53.2 1351 15.1 384 24.8 631 16.5 420 23.5 17.7 450
(14.00R25) 170E High-Speed Service VHS ★3 T/L 10.00/1.5 53.4 1356 15.0 382 24.6 626 16.6 422 23.0 17.7 450
170E High-Speed Service VSB T/L 10.00/1.5 53.7 1365 15.4 390 25.0 635 16.7 425 21.0 17.7 450
15.5R25 L2 VKT ★1 T/L 12.00/1.3 50.2 1275 15.4 392 22.4 570 17.5 445 23.5 - -
L2 G2 VUT ★1★2 T/L 12.00/1.3 49.9 1267 15.2 385 22.0 559 17.2 436 27.0 - -
16.00R25 E4 VMTS ★2 T/L 11.25/2.0 60.4 1535 17.7 450 27.4 696 20.0 507 45.0 20.2 513
E4 VRLS ★2 T/L 11.25/2.0 60.3 1531 17.6 448 27.4 697 20.1 510 45.5 20.2 513
Industrial Service VCHD ★2 T/L 11.25/2.0 59.1 1500 17.1 435 25.8 655 19.8 503 54.0 20.6 523
Industrial Service VRLS ★2 T/L 11.25/2.0 60.3 1531 17.6 448 26.4 670 20.5 520 45.0 21.3 540
445/95R25 177E High-Speed Service VSW T/L 11.25/2.0 58.4 1484 17.1 435 27.4 695 18.7 476 23.0 20.2 513
(16.00R25) 177E High-Speed Service VHB ★2 T/L 11.25/2.0 58.4 1484 17.3 440 27.2 690 18.7 475 22.5 20.2 513
177E High-Speed Service VKT ★2 T/L 11.25/2.0 58.3 1480 16.9 428 28.2 717 18.7 474 28.5 20.2 513
177E High-Speed Service VHS ★2 T/L 11.25/2.0 58.4 1484 17.1 435 26.9 684 18.9 480 25.5 20.2 513
T/T: Tube Type T/L: Tubeless Type TG: For Semi-Drop Center Rim
* in preparation
 TRA Code Recommended Approximate Inflated Dimensions Minimum
Load Index/ Star
Tire Size or Pattern Rating Type Rim/ OD OW SLR SLW OTD Dual Spacing
Speed Symbol
Application Flange Height (inch) inch mm inch mm inch mm inch mm mm inch mm
17.5R25 G2 VSW ★1 T/L 14.00/1.5 52.8 1340 17.3 440 23.5 597 18.9 480 27.0 - -
L2 G2 VUT ★1 T/L 14.00/1.5 52.8 1340 17.3 440 23.1 586 19.7 500 27.0 - -
E2 VGT ★1 T/L 14.00/1.5 52.5 1334 17.3 440 24.0 610 19.3 490 24.0 - -
L2 G2 E2 VKT ★1★2 T/L 14.00/1.5 52.8 1340 17.3 440 23.6 600 19.3 490 27.0 - -
L3 E3 VMT ★1★2 T/L 14.00/1.5 53.2 1352 17.3 440 23.6 600 20.2 514 30.0 - -
L5 VSDL ★1★2 T/L 14.00/1.5 55.1 1400 17.3 440 25.2 639 19.5 495 68.0 - -
L5S VSMS ★1★2 T/L 14.00/1.5 53.9 1370 17.3 440 24.5 623 19.2 487 68.5 - -
445/80R25 170E High-Speed Service VGT ★2 T/L 14.00/1.5 52.7 1339 17.3 440 24.0 610 19.1 485 24.0 - -
(17.5R25)
18.00R25 E2 VKT ★1★2 T/L 13.00/2.5 63.4 1610 20.1 510 28.9 733 22.5 571 31.0 23.1 587
E3 VEL ★2 T/L 13.00/2.5 63.3 1609 20.3 515 28.7 729 22.8 580 34.0 23.1 587
E4 VMTS ★2 T/L 13.00/2.5 65.1 1654 20.3 515 29.7 754 22.5 571 51.0 23.1 587
E4 VELS ★2 T/L 13.00/2.5 64.6 1642 20.3 515 29.3 744 22.8 580 50.0 23.1 587
L5S VSMS ★1★2 T/L 13.00/2.5 66.2 1681 20.2 512 29.0 736 23.3 592 84.0 - -
Industrial Service VEL ★3 T/L 13.00/2.5 63.3 1609 20.3 515 27.0 687 23.3 592 34.0 24.1 612
214A5 Industrial Service VCHS ★3 T/L 13.00/2.5 65.0 1650 19.8 504 28.4 721 23.2 590 64.0 23.6 600
Industrial Service VSMS ★2 T/L 13.00/2.5 66.2 1681 20.2 512 28.7 730 23.3 592 84.0 24.1 612
505/95R25 186E High-Speed Service VHS ★2 T/L 13.00/2.5 62.7 1593 19.9 505 28.6 727 22.2 565 26.0 23.1 587
(18.00R25) 186E High-Speed Service VHB ★2 T/L 13.00/2.5 63.4 1610 20.3 515 28.9 733 22.2 565 26.0 23.1 587
20.5R25 L2 E2 VSW MS T/L 17.00/2.0 57.9 1470 21.0 533 25.2 640 23.7 603 31.5 - -
L2 G2 VUT ★1 T/L 17.00/2.0 58.0 1473 21.1 536 25.3 643 23.9 608 31.0 - -
L2 E2 G2 VKT ★1★2 T/L 17.00/2.0 57.9 1470 20.9 530 25.4 644 23.5 597 30.5 - -
RADIAL TIRE TECHNICAL DATA 23

177B/186A2 E3 L3 VLT MS T/L 17.00/2.0 58.9 1495 21.0 533 26.6 676 23.1 586 40.0 - -
L3 E3 VMT ★1★2 T/L 17.00/2.0 58.3 1480 20.9 530 25.7 652 23.5 597 33.0 - -
177B E4 VLTS ★2 T/L 17.00/2.0 58.3 1480 20.9 530 26.3 667 22.9 581 49.0 - -
L4 E4 VALS ★1★2 T/L 17.00/2.0 59.1 1500 20.9 530 26.0 661 24.1 612 45.0 - -
L5 VSDL ★1★2 T/L 17.00/2.0 61.1 1552 20.9 531 27.7 704 23.0 583 78.0 - -
T/T: Tube Type T/L: Tubeless Type MS: Multi Star Rating
24

TRA Code Recommended Approximate Inflated Dimensions Minimum

Load Index/ Star
Tire Size or Pattern Rating Type Rim/ OD OW SLR SLW OTD Dual Spacing
Speed Symbol
Application Flange Height (inch) inch mm inch mm inch mm inch mm mm inch mm
525/80R25 179E High-Speed Service VHB ★2 T/L 17.00/2.0 57.7 1465 20.9 530 26.4 670 22.6 575 22.5 - -
(20.5R25) 179E High-Speed Service VKT ★2 T/L 17.00/2.0 57.9 1470 20.9 530 26.0 660 23.2 590 30.5 - -
179E High-Speed Service VHS ★2 T/L 17.00/2.0 58.3 1480 21.0 533 26.7 677 22.8 578 31.0 - -
21.00R25 E7 VSJ T/L 15.00/3.0 68.0 1728 23.0 584 30.9 784 25.6 649 22.5 27.0 685
23.5R25 L2 E2 VSW MS T/L 19.50/2.5 62.8 1596 24.4 620 27.2 692 27.1 689 31.5 - -
L2 G2 VUT ★1 T/L 19.50/2.5 63.0 1599 24.4 620 27.6 702 27.1 688 35.5 - -
L2 E2 VKT ★1★2 T/L 19.50/2.5 62.8 1595 24.3 617 27.2 690 27.0 686 33.0 - -
185B/195A2 E3 L3 VLT MS T/L 19.50/2.5 64.1 1629 24.1 612 28.9 734 26.8 680 42.5 - -
L3 E3 VMT ★1★2 T/L 19.50/2.5 63.0 1600 24.3 617 27.6 702 27.1 688 35.0 - -
176B/185B E4 VLTS ★1★2 T/L 19.50/2.5 63.6 1616 24.1 612 28.7 729 26.6 675 54.0 - -
L4 E4 VALS ★1★2 T/L 19.50/2.5 64.3 1633 24.1 612 28.2 716 27.1 689 51.0 - -
195A/201A2 L5 VSDT ★1★2 T/L 19.50/2.5 65.4 1660 24.4 621 29.3 745 26.8 680 79.0 - -
L5 VSDL ★1★2 T/L 19.50/2.5 65.8 1672 23.9 608 29.7 755 26.7 677 87.0 - -
Industrial Service VSDL ★2 T/L 19.50/2.5 65.8 1672 23.9 608 29.7 755 27.0 687 87.0 28.4 722
26.5R25 L2 E2 VKT ★1★2 T/L 22.00/3.0 68.1 1731 26.7 677 29.8 756 30.4 772 39.0 - -
193B/202A2 E3 L3 VLT MS T/L 22.00/3.0 69.1 1755 26.6 675 31.0 787 29.0 736 45.0 - -
L3 E3 VMT ★1★2 T/L 22.00/3.0 68.5 1740 26.9 684 29.7 754 30.2 766 38.0 - -
193B E4 VLTS ★2 T/L 22.00/3.0 68.3 1736 26.6 675 30.9 784 29.3 743 60.0 - -
E4 L4 VSNT MS T/L 22.00/3.0 70.0 1779 26.8 680 31.5 799 29.1 740 57.5 - -
202A2/209A2 L5 VSDT ★1★2 T/L 22.00/3.0 69.9 1775 27.4 697 31.1 790 30.6 778 88.0 - -
L5 VSDL ★1★2 T/L 22.00/3.0 70.5 1790 26.9 684 31.4 797 30.0 761 95.5 - -
L5S VSMS ★1★2 T/L 22.00/3.0 69.9 1775 26.9 684 31.9 810 29.4 746 95.0 - -
29.5R25 E2 VKT ★2 T/L 25.00/3.5 73.3 1861 30.0 762 32.4 822 33.2 844 44.0 - -
200B/208A2 E3 L3 VLT MS T/L 25.00/3.5 74.1 1881 30.0 762 33.1 840 32.7 830 48.0 - -
208A2 L3 E3 VMT ★1★2 T/L 25.00/3.5 73.5 1868 30.2 767 31.8 808 34.2 868 42.0 - -
208A2/200B E4 L4 VLTS ★1★2 T/L 25.00/3.5 73.4 1865 30.2 767 32.9 835 33.2 844 65.0 - -
E4 L4 VSNT MS T/L 25.00/3.5 75.0 1905 30.2 768 33.4 849 32.9 835 60.0 - -
208A2/216A2 L5 VSDT ★1★2 T/L 25.00/3.5 74.7 1898 30.7 779 33.3 845 34.2 869 96.0 - -
L5 VSDL ★1★2 T/L 25.00/3.5 75.8 1925 30.2 766 33.7 855 33.3 846 104.0 - -
T/T: Tube Type T/L: Tubeless Type MS: Multi Star Rating
 TRA Code Recommended Approximate Inflated Dimensions Minimum
Load Index/ Star
Tire Size or Pattern Rating Type Rim/ OD OW SLR SLW OTD Dual Spacing
Speed Symbol
Application Flange Height (inch) inch mm inch mm inch mm inch mm mm inch mm
25/65R25 E2 VKT ★2 T/L 20.00/2.0 58.3 1480 25.2 640 26.4 670 27.2 690 30.5 - -
650/65R25 L3 VTS ★1 T/L 19.50/2.5 59.1 1502 25.3 642 26.0 660 28.0 710 37.0 - -
750/65(30/65)R25 190B/202A2 E3 L3 VLT MS T/L 24.00/3.0 64.0 1625 30.1 765 28.3 718 32.7 831 43.0 - -
29.5R29 E2 VKT ★2 T/L 25.00/3.5 77.1 1958 30.1 765 34.3 870 33.1 841 44.0 - -
E4 L4 VSNT MS T/L 25.00/3.5 78.7 2000 30.5 774 35.6 905 34.6 849 60.0 - -
211A2/218A2 L5 VSDT ★1★2 T/L 25.00/3.5 78.5 1993 30.5 774 34.8 883 34.3 872 96.0 - -
L5 VSDL ★1★2 T/L 25.00/3.5 79.1 2008 30.2 766 35.4 900 33.7 856 104.5 - -
L5S VSMS ★1★2 T/L 25.00/3.5 79.1 2008 30.2 766 35.6 904 33.9 861 104.5 - -
33.25R29 E2 VKT ★2 T/L 27.00/3.5 81.5 2070 33.6 853 35.4 900 37.0 940 48.5 - -
E3 VRL ★2 T/L 27.00/3.5 81.5 2070 33.6 853 35.4 899 36.6 930 44.0 - -
775/65R29 L3 VTS ★1 T/L 25.00/3.5 (24.00/3.5) 68.5 1740 30.3 770 30.0 762 33.2 843 43.0 - -
875/65R29 L3 VTS ★1 T/L 27.00/3.5 (28.00/3.5) 73.4 1865 33.5 850 31.7 804 38.7 982 47.5 - -
18.00R33 E2 VFT ★2 T/L 13.00/2.5 71.3 1811 19.7 500 32.7 830 21.9 555 30.5 23.1 587
E3 VEL ★2 T/L 13.00/2.5 71.1 1805 19.7 500 32.9 835 22.0 560 35.0 23.1 587
E4 VMTS ★2 T/L 13.00/2.5 73.3 1862 20.3 515 33.4 849 22.7 576 51.0 23.1 587
E4 VMTP ★2 T/L 13.00/2.5 73.6 1870 20.3 515 33.3 846 22.6 575 55.0 23.1 587
E4 VELS ★2 T/L 13.00/2.5 73.1 1856 20.2 512 33.7 856 22.6 575 49.0 23.1 587
219A5 Industrial Service VCHS ★3 T/L 13.00/2.5 73.1 1856 19.5 495 32.0 814 22.4 570 68.5 23.6 600
21.00R33 E4 VRLS ★2 T/T(T/L) 15.00/3.0 77.9 1978 22.8 578 35.4 899 25.6 650 54.0 - -
33.5R33 E2 VKT ★2 T/L 28.00/4.0 87.6 2224 34.5 876 39.0 990 38.6 980 48.5 - -
35/65R33 E4 L4 VSNT MS T/L 28.00/3.5 81.7 2075 35.6 904 36.9 936 38.4 976 62.5 - -
217A2 L5 VSDT ★1 T/L 28.00/3.5 81.7 2075 35.0 890 36.0 914 39.0 990 96.0 - -
RADIAL TIRE TECHNICAL DATA 25

L5 VSDL ★1 T/L 28.00/3.5 81.7 2075 34.6 880 36.1 917 37.4 951 95.0 - -
37.5R33 E2 VKT ★2 T/L 32.00/4.5 93.5 2375 38.8 985 41.3 1050 43.3 1100 51.0 - -
T/T: Tube Type T/L: Tubeless Type MS: Multi Star Rating
26

TRA Code Recommended Approximate Inflated Dimensions Minimum

Load Index/ Star Dual Spacing
Tire Size or Pattern Rating Type Rim/ OD OW SLR SLW OTD
Speed Symbol
Application Flange Height (inch) inch mm inch mm inch mm inch mm mm inch mm
21.00R35 E3 VEL ★2 T/L 15.00/3.0 78.5 1993 22.4 568 35.9 912 25.4 646 37.5 27.6 701
E4 VMTS ★2 T/L 15.00/3.0 80.2 2038 22.6 575 36.7 932 25.8 655 54.0 27.6 701
E4 VMTP ★2 T/L 15.00/3.0 80.6 2048 22.7 577 36.3 922 25.8 655 61.0 27.6 701
E4 VELS ★2 T/L 15.00/3.0 80.5 2044 22.7 577 36.8 935 25.6 650 59.0 27.6 701
24.00R35 E3 VEL ★2 T/L 17.00/3.5 83.6 2123 26.0 660 37.4 950 29.2 741 44.0 31.3 795
E4 VMTS ★2 T/L 17.00/3.5 85.6 2175 26.0 660 38.6 980 28.9 734 59.0 31.3 795
E4 VMTP ★2 T/L 17.00/3.5 86.4 2194 26.0 660 38.4 975 28.9 734 68.0 31.3 795
E4 VRLS ★2 T/L 17.00/3.5 85.6 2175 26.0 660 38.6 980 28.9 734 59.0 31.3 795
29.5R35 E3 VRL ★2 T/L 25.00/3.5 83.5 2120 30.2 768 36.7 932 33.2 844 39.5 - -
33.25R35 E2 VKT ★2 T/L 27.00/3.5 87.6 2224 33.7 856 39.0 990 37.6 955 49.5 - -
E3 VRL ★2 T/L 27.00/3.5 87.7 2228 33.3 846 39.0 990 38.2 970 49.0 - -
37.25R35 E2 VKT ★2 T/L 31.00/4.0 93.3 2370 37.6 954 41.1 1045 41.9 1063 51.0 - -
E3 VRL ★2 T/L 31.00/4.0 93.3 2370 37.6 954 41.1 1045 41.9 1063 51.0 - -
37.5R39 E2 VKT ★2 T/L 32.00/4.5 99.4 2524 38.7 982 44.1 1120 42.5 1080 51.0 - -
E3 VRL ★2 T/L 32.00/4.5 99.4 2526 38.7 982 44.1 1120 42.5 1080 48.5 - -
40.5/75R39 E3 VRL ★2 T/L 32.00/4.5 101.9 2588 39.4 1002 44.4 1128 45.1 1145 48.5 - -
45/65R39 L5 VSDL ★1 T/L 32.00/4.5(36.00/4.5) 101.6 2580 42.3 1074 43.9 1116 47.4 1205 116.0 - -
45/65R45 L5 VSDL ★1★2 T/L 36.00/4.5 107.5 2730 44.2 1123 46.8 1188 50.2 1274 111.5 - -
24.00R49 E2 VFT ★2 T/L 17.00/3.5 97.9 2486 25.8 656 45.2 1147 29.1 738 38.5 31.3 795
E4 VMTS ★2 T/L 17.00/3.5 99.6 2529 25.8 656 45.9 1166 28.9 735 59.0 31.3 795
E4 VMTP ★2 T/L 17.00/3.5 100.3 2547 25.8 656 46.3 1175 28.9 735 68.0 31.3 795
E4 VRLS ★2 T/L 17.00/3.5 99.6 2531 25.8 656 45.9 1166 29.1 738 59.0 31.3 795
27.00R49 E2 VFT ★2 T/L 19.50/4.0 104.2 2646 29.5 750 47.5 1207 32.9 835 44.0 35.1 892
E3 VRL ★2 T/L 19.50/4.0 104.1 2645 29.5 750 47.4 1205 32.9 835 42.5 35.1 892
E4 VMTS ★2 T/L 19.50/4.0 105.9 2690 29.5 750 48.4 1230 32.9 835 64.0 35.1 892
E4 VMTP ★2 T/L 19.50/4.0 106.6 2708 29.5 750 48.8 1239 32.9 835 73.0 35.1 892
E4 VRLS ★2 T/L 19.50/4.0 106.1 2694 29.5 750 48.5 1231 32.9 835 66.5 35.1 892
T/T: Tube Type T/L: Tubeless Type
 TRA Code Recommended Approximate Inflated Dimensions Minimum
Load Index/ Star
Tire Size or Pattern Rating Type Rim/ OD OW SLR SLW OTD Dual Spacing
Speed Symbol
Application Flange Height (inch) inch mm inch mm inch mm inch mm mm inch mm
31/90R49 E4 VELSF ★2 T/L 19.50/4.0 106.1 2694 30.4 771 48.3 1228 33.9 862 66.5 37.6 956
30.00R51 E2 VHS ★2 T/L 22.00/4.5 111.3 2826 33.6 854 50.5 1282 37.4 950 37.5 39.1 993
E3 VMT ★2 T/L 22.00/4.5 112.2 2850 33.6 854 50.9 1294 37.4 950 45.0 39.1 993
E4 VRLS ★2 T/L 22.00/4.5 114.6 2911 33.6 854 51.6 1311 37.9 963 74.5 39.1 993
33.00R51 E3 VMT ★2 T/L 24.00/5.0 117.6 2988 36.7 932 52.7 1338 41.4 1052 48.0 42.3 1074
E4 VMTS ★2 T/L 24.00/5.0 119.8 3044 36.7 932 53.8 1367 41.4 1052 76.0 42.3 1074
E4 VMTP ★2 T/L 24.00/5.0 120.6 3063 36.7 932 54.2 1376 41.4 1052 89.5 42.3 1074
E4 VRLS ★2 T/L 24.00/5.0 120.2 3052 36.7 932 54.0 1371 41.4 1051 78.5 42.3 1074
36.00R51 E3 VMT ★2 T/L 26.00/5.0 123.9 3148 40.0 1015 55.2 1403 45.4 1153 52.5 46.6 1184
E4 VRLS ★2 T/L 26.00/5.0 126.1 3204 40.0 1015 56.3 1431 45.4 1153 86.5 46.6 1184
37.00R57 E4 VRLS ★2 T/L 27.00/6.0 134.3 3410 41.1 1044 60.4 1535 46.9 1190 87.5 47.9 1217
E4 VRLSC ★2 T/L 27.00/6.0 135.4 3440 40.5 1028 60.7 1541 46.2 1174 85.0 47.9 1217
E4 VZTS ★2 T/L 27.00/6.0 134.7 3422 41.1 1044 60.7 1541 46.9 1190 87.5 47.9 1217
NEW E4 VELSL ★2 T/L 27.00/6.0 133.4 3388 41.1 1044 60.0 1524 46.9 1190 77.0 47.9 1217
42/90R57 NEW E4 VRDP* ★2 T/L (27.00/6.0) (136.1) (3456) (41.7) (1060) - - - - (97.0) - -
40.00R57 E3 VMT ★2 T/L 29.00/6.0 138.4 3516 44.4 1127 61.0 1550 50.8 1290 64.0 53.6 1361
E4 VZTS ★2 T/L 29.00/6.0 141.1 3585 44.9 1140 63.2 1606 50.7 1289 91.5 53.6 1361
NEW E4 VELSL ★2 T/L 29.00/6.0 139.4 3542 43.6 1108 62.0 1575 49.8 1264 80.0 53.6 1361
E4 VELS ★2 T/L 29.00/6.0 140.2 3562 44.4 1127 62.3 1582 50.8 1291 91.5 53.6 1361
E4 VELSC ★2 T/L 29.00/6.0 140.0 3557 43.6 1108 62.3 1582 49.8 1264 88.0 53.6 1361
NEW E4 VRDP ★2 T/L 29.00/6.0 140.7 3575 43.6 1108 62.3 1582 49.8 1264 97.0 53.6 1361
46/90R57 E4 VELSF ★2 T/L 29.00/6.0 140.0 3557 45.1 1145 62.1 1577 51.1 1299 88.0 55.6 1412
RADIAL TIRE TECHNICAL DATA 27

NEW E4 VRDP ★2 T/L 29.00/6.0 (32.00/6.0) 140.7 3575 45.1 1145 62.4 1586 51.1 1299 97.0 55.6 1412
55.5/80R57 L5 VSDL T/L 44.00/6.0 147.2 3740 55.5 1410 64.3 1634 63.6 1616 125.5 - -
50/90R57 E4 VELS ★2 T/L 34.00/6.5 150.6 3825 50.5 1283 66.7 1694 57.9 1471 91.5 61.5 1562
53/80R63 E4 VRLS ★2 T/L 36.00/5.0 148.8 3780 51.2 1300 64.2 1630 59.5 1511 83.5 64.0 1626
E4 VRLSA ★2 T/L 36.00/5.0 148.8 3780 51.2 1300 64.2 1630 59.5 1511 83.5 64.0 1626
55/80R63 E4 VRLSA ★2 T/L 41.00/5.0 154.0 3912 54.3 1378 65.8 1672 64.2 1630 86.0 68.5 1740
59/80R63 NEW E4 VELS ★2 T/L 44.00/5.0 158.5 4025 57.9 1470 67.3 1710 67.4 1712 89.0 70.0 1780
T/T: Tube Type T/L: Tubeless Type
* in preparation
28

RADIAL TIRE LOAD AND INFLATION PRESSURE TABLES

■Earthmover Service
50km/h (30mph) Maximum Speed Table: R1
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 450 475 500 525 550 575 600 625 650 675 700 800
psi 65 69 73 76 80 83 87 91 94 98 102 116
14.00R24 Kg 4000 4125 4375 4500 4625 4750 5000 5150 5300 5450 5600 6050★★★
(14.00R24 TG) lbs 8800 9100 9650 9900 10200 10500 11000 11400 11700 12000 12300 13400 ★★★
14.00R25 Kg 4000 4125 4375 4500 4625 4750 5000 5150 5300 5450 5600 6050★★★
lbs 8800 9100 9650 9900 10200 10500 11000 11400 11700 12000 12300 13400 ★★★
16.00R25 Kg 5150 5450 5600 5800 6000 6300 6500 6700 6900 7100 7300★★
lbs 11400 12000 12300 12800 13200 13900 14300 14800 15200 15700 16100 ★★
18.00R25 Kg 6700 7100★ 7300 7500 7750 8000 8250 8500 8750 9000 9250★★
lbs 14800 15700 ★ 16100 16500 17100 17600 18200 18700 19300 19800 20400 ★★
18.00R33 Kg 7750 8000 8500 8750 9000 9250 9750 10000 10300 10600 10900★★
lbs 17100 17600 18700 19300 19800 20400 21500 22000 22700 23400 24000 ★★
21.00R33 Kg 10000 10300 10900 11250 11500 11800 12500 12850 13200 13600 14000★★
lbs 22000 22700 24000 24700 25400 26000 27600 28300 29400 30000 30900 ★★
21.00R35 Kg 10300 10600 11200 11500 11800 12150 12850 13200 13600 14000 14500★★
lbs 22700 23400 24700 25400 26000 26800 28300 29100 30000 30900 32000 ★★
24.00R35 Kg 13200 13600 14000 14500 15500 16000 16500 17000 17500 18000 18500★★
lbs 29100 30000 30900 32000 34200 35300 36400 37500 38600 39700 40800 ★★
24.00R49 Kg 15500 16500 17000 17500 18500 19000 19500 20000 20600 21200 21800★★
lbs 34200 36480 37500 38600 40800 41900 43000 44100 45400 46700 48100 ★★
27.00R49 Kg 19500 20000 20600 21800 22400 23000 23600 25000 25750 26500 27250★★
lbs 43000 44100 45400 48100 49400 50700 52000 55100 56800 58400 60000 ★★
31/90R49 Kg 20550 21400 22200 23050 23850 24650 25450 26250 27050 27850 28600★★
lbs 45300 47100 49000 50800 52600 54400 56200 57900 59600 61400 63100 ★★
30.00R51 Kg 23600 25000 25750 26500 28000 29000 30000 30750 31500 32500 33500★★
lbs 52000 55100 56800 58400 61500 64000 66000 68000 69500 71500 74000 ★★
33.00R51 Kg 27250 29000 30000 30750 32500 33500 34500 35500 36500 37500 38750★★
lbs 60000 64000 66000 68000 71500 74000 76000 78500 80500 82500 85500 ★★
36.00R51 Kg 33500 35500 36500 37500 38750 40000 41250 42500 43750 45000 46250★★
lbs 74000 78500 80500 82500 85500 88000 91000 93500 96500 99000 102000 ★★
37.00R57 Kg 37500 38750 40000 42150 43750 45000 46250 47500 48750 50000 51500★★
lbs 82500 85500 88000 91000 96500 99000 102000 104500 107500 110000 113500 ★★
42/90R57 Kg – – – – – – – – – – –
lbs – – – – – – – – – – –
40.00R57 Kg 42500 45000 46250 48750 50000 51500 53000 54500 56000 58000 60000★★
lbs 93500 99000 102000 107500 110000 113500 117000 120000 123500 128000 132500 ★★
46/90R57 Kg 44500 46250 48000 49750 51500 53250 55000 56750 58500 60250 62000★★
lbs 98000 102000 106000 109500 113500 117500 121500 125000 129000 133000 136500 ★★
50/90R57 Kg 54500 56000 58000 60000 63000 65000 67000 69000 71000 73000 75000★★
lbs 120000 123500 128000 132500 139000 143500 147500 152000 156500 161000 165500 ★★
53/80R63 Kg 67050 69800 72550 75250 77950 80550 83200★★
lbs 147800 153900 160000 165900 171800 177600 183400 ★★
55/80R63 Kg 76000 79500 82500 85500 88500 91500 94500★★
lbs 168000 175000 181500 188500 195000 201500 208000 ★★
59/80R63 Kg 81900 85200 88600 91900 95200 98400 101600★★
lbs 180000 188000 195000 203000 210000 217000 224000 ★★
Note: 1) Bold face figures denote maximum load for symbols shown.
 ■Earthmover Service
50km/h (30mph) Maximum Speed Table: R2
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 275 300 325 350 375 400 425 450 475 500 525
psi 40 44 47 51 54 58 62 65 69 73 76
17.5R25 Kg 3350 3550 3750 4000 4125★ 4375 4625 4750 5000 5150 5450★★
lbs 7400 7850 8250 8800 9100 ★ 9650 10200 10500 11000 11400 12000 ★★
20.5R25 Kg 4375 4750 5000 5300 5600★ 5800 6150 6500 6700 6900 7300★★
lbs 9650 10500 11000 11700 12300 ★ 12800 13600 14300 14800 15200 16100 ★★
23.5R25 Kg 5600 6000 6500 6700 7100★ 7500 7750 8250 8500 9000 9250★★
lbs 12300 13200 14300 14800 15700 ★ 16500 17100 18200 18700 19800 20400 ★★
26.5R25 Kg 7100 7500 8000 8500 9000★ 9500 9750 10300 10600 11200 11500★★
lbs 15700 16500 17600 18700 19800 ★ 20900 21500 22700 23400 24700 25400 ★★
29.5R25 Kg 8500 9250 9750 10300 10900★ 11500 11800 12500 12850 13600 14000★★
lbs 18700 20400 21500 22700 24000 ★ 25400 26000 27600 28300 30000 30900 ★★
29.5R29 Kg 9250 9750 10300 10900 11500★ 12150 12500 13200 13600 14500 15000★★
lbs 20400 21500 22700 24000 25400 ★ 26800 27600 29100 30000 32000 33100 ★★
29.5R35 Kg 10000 10600 11200 11800 12500 13200 13600 14500 15000 15500 16000★★
lbs 22000 23400 24700 26000 27600 29100 30000 32000 33100 34200 35300 ★★
25/65R25 Kg 5600 6000 6350 6700 7100 7450 7750★★
RADIAL TIRE LOAD AND INFLATION PRESSURE TABLES 29

lbs 12350 13200 14000 14800 15600 16350 17100 ★★

750/65R25 Kg 7650 8200 8700 9200 9700 10150 10600★★
(30/65R25) lbs 16900 18050 19150 20250 21350 22400 23400 ★★
35/65R33 Kg 10600 11500 12150 12850 13600 14000 15000 15500 16000 17000 17500★★
lbs 23400 25400 26800 28300 30000 30900 33100 34200 35300 37500 38600 ★★
33.25R29 Kg 11200 12150 12850 13600 14000 15000 15500 16500 17000 17500 18500★★
lbs 24700 26800 28300 30000 30900 33100 34200 36400 37500 38600 40800 ★★
33.25R35 Kg 12150 12850 14000 14500 15500 16000 17000 17500 18500 19000 20000★★
lbs 26800 28300 30900 32000 34200 35300 37500 38600 40800 41900 44100 ★★
33.5R33 Kg 12150 13200 14000 14500 15500 16500 17000 18000 18500 19000 20000★★
lbs 26800 29100 30900 32000 34200 36400 37500 38700 40800 41900 44100 ★★
37.25R35 Kg 14500 15500 16500 17500 18500 19500 20600 21200 22400 23000 23600★★
lbs 32000 34200 36400 38600 40800 43000 45400 46700 49400 50700 52000 ★★
37.5R33 Kg 14500 15500 16500 17500 18500 19500 20600 21200 22400 23000 24300★★
lbs 32000 34200 36480 38600 40800 43000 45400 46700 49400 50700 53600 ★★
37.5R39 Kg 16000 17000 18000 19000 20000 21200 21800 23000 23600 25000 25750★★
lbs 35300 37500 39700 41900 44100 46700 48100 50700 52000 55100 56800 ★★
40.5/75R39 Kg 18000 19000 20600 21800 22400 23600 25000 25750 27250 28000 29000★★
lbs 39700 41900 45400 48100 49400 52000 55100 56800 60000 61500 64000 ★★
Note: Bold face figures denote maximum load for symbols shown.
30

■Earthmover Service (L317)

50km/h (30mph) Maximum Speed Table: R3
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 450 475 500 525 550 575 600 625 650 675 700 775 815
psi 65 69 73 76 80 83 87 91 94 98 102 112 118
11.00R20 Kg 2500 2600 2710 2810 2910 3010 3100 3200 3300 3390 3480 3760★★★
lbs 5510 5730 5970 6200 6420 6640 6830 7050 7280 7470 7670 8290★★★
12.00R20 Kg 2770 2880 2990 3110 3220 3330 3430 3540 3650 3750 3850 4160★★★
lbs 6110 6350 6590 6860 7100 7340 7560 7800 8050 8270 8490 9170★★★
12.00R24 Kg 3050 3180 3300 3430 3550 3670 3790 3900 4020 4140 4250★★★
lbs 6720 7010 7280 7560 7830 8090 8360 8600 8860 9130 9370★★★
12R22.5 Kg 2410 2510 2610 2700 2800 2890 2990 3080 3170 3260 3350 3620 3760★★★
lbs 5310 5530 5750 5950 6170 6370 6590 6790 6990 7190 7390 7980 8290★★★
Note: Bold face figures denote maximum load for symbols shown.

LOAD CAPACITIES FOR EARTHMOVER SERVICE (2)The Variation in Load Carrying Capacity with Speed.
Operating Variation in
(1)Excess Loads Speed Load Capacity
Due to the specialized nature of Off-The-Road vehicle usage, loads in excess of (km/h) (%)
those in the appropriate above-listed load tables are often encountered. <15 *
These excess loads result from items such as actual vehicle weight exceeding the 15 +12%
design weight, varying density of materials, field modifications to the equipment, 20 +10%
25 +8%
load transfer, etc.
30 +6%
Only under these conditions, the actual tire load in service may exceed the 35 +4%
above load ratings in the tables (R1, R2) for the tire by an amount not greater 40 +3%
than shown in the following table: 45 +2%
50
Maximum Excess Loads (Reference Speed for 0
Load *Pressure Earthmover Service)
Radial Tires 7% 14% E2, E3 E4
55 -2% -2%
60 -6% -6%
*When excess loads are encountered, cold inflation pressures must be 65 -12% -12%
increased to compensate for higher loads. For each 1% increase in load, the 70 -20%* *
inflation pressure must be increased by 2%. 75 -30%* *
The inflation pressure should not exceed 800kPa (116psi). 80 -42% *
>80 * *
The above maximum excess loads will result in reduced tire performance *Consult a Bridgestone Representative.
and MUST BE APPROVED BY BRIDGESTONE.
The variation in load carrying capacity with speed of earthmoving equipment tires
is determined by applying the percentages shown above to the tire load capacities
specified for EARTHMOVER SERVICE (Table: R1, R2, R3) at the corresponding
inflation pressure.
 ■Grader Service
40km/h (25mph) Maximum Speed Table: R4
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 200 225 250 275 300 325 350 375
psi 29 33 36 40 44 47 51 54
13.00R24TG Kg 1850 2000 2180 2360 2500 2650 2800 3000★
lbs 4080 4400 4800 5200 5520 5840 6150 6600★
14.00R24TG Kg 2240 2430 2650 2800 3000 3250 3350 3650★
lbs 4940 5360 5840 6150 6600 7150 7400 8050★
16.00R24TG Kg 2900 3150 3350 3650 3875 4125 4375 4625★
lbs 6400 6950 7400 8050 8550 9100 9650 10200★
Note: For 14.00R24TG VSW ★3, consult a Bridgestone Representative.

■Grader Service
40km/h (25mph) Maximum Speed Table: R5
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 125 150 175 200 225 250 275 300
RADIAL TIRE LOAD AND INFLATION PRESSURE TABLES 31

psi 18 22 25 29 33 36 40 44
15.5R25 Kg 1550 1750 2000 2180 2360 2575 2800 3000★
lbs 3420 3860 4400 4800 5200 5680 6150 6600★
17.5R25 Kg 1850 2120 2360 2575 2900 3075 3350 3650★
lbs 4080 4680 5200 5680 6400 6800 7400 8050★
20.5R25 Kg 2430 2800 3150 3450 3875 4125 4375 4625★
lbs 5360 6150 6950 7600 8550 9100 9650 10200★
23.5R25 Kg 3150 3550 4000 4500 4875 5300 5600 6000★
lbs 6950 7850 8800 9900 10700 11700 12300 13200★
Notes: 1) Bold face figures denote maximum load for symbols shown.
2) For slope and ditching service, inflation pressures should be increased by 100kPa (15psi) with no increase in load rating.
For extreme conditions, consult a Bridgestone Representative for additional recommended operating requirements.
32

■Loader & Dozer Service

10km/h (5mph) Maximum Speed
Distance up to 76m (250ft) Table: R6
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 525 550 575 600 625 650 675 700 725 750 775 800 825
psi 76 80 83 87 91 94 98 102 105 109 112 115 120
8.25R15 Kg 2200 2275 2350 2425 2500 2575 2650 2725 2800 2875 2950 3025 3100★★
lbs 4860 5020 5200 5360 5540 5700 5860 6000 6200 6350 6500 6650 6800 ★★
10.00R15 Kg 2875 2975 3075 3175 3275 3375 3475 3575 3650 3750 3850 3950 4025 ★★
lbs 6350 6550 6800 7000 7200 7450 7650 7850 8050 8250 8500 8700 8900 ★★
9.00R20 Kg 3075 3250 3350 3450 3550 3650 3750 3850 3950 4050 4150 4250 4375★★
lbs 6800 7150 7400 7600 7850 8050 8250 8500 8700 8950 9150 9350 9650 ★★
12.00R20 Kg 4375 4500 4625 4875 5000 5150 5300 5450 5600 5700 5850 6000 6150★★
lbs 9650 9900 10200 10700 11000 11400 11700 12000 12300 12600 12900 13200 13600 ★★
14.00R20 Kg 5200 5400 5550 5750 5900 6100 6250 6450 6600 6800 6950 7100 7300★★
lbs 11400 11900 12300 12600 13000 13400 13800 14200 14600 15000 15300 15700 16100 ★★
12.00R24 Kg 5000 5150 5300 5450 5600 5800 6000 6150 6250 6400 6600 6750 6900★★
lbs 11000 11400 11700 12000 12300 12800 13200 13600 13800 14100 14500 14800 15200 ★★
14.00R24TG Kg 6700 6900★
lbs 14800 15200 ★
18.00R25 Kg 11200 11800★ 12150 12500 12850 13200 13600 14000 14400 14800 15200 15500 16000★★
lbs 24700 26000 ★ 26800 27600 28300 29100 30000 30900 31800 32700 33500 34200 35300 ★★
Note: Bold face figures denote maximum load for symbols shown.

■Loader & Dozer Service

10km/h (5mph) Maximum Speed
Distance up to 76m (250ft) Table: R7 Distance up to 76m (250ft) Table: R8
Tire Load Limits at Various Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Tire Size Cold Inflation Pressures (100kPa=1bar) Designation kPa 400 425 450 475 500 525 550 575 600 625 650
Designation kPa 275 300 325 350 375 psi 58 62 65 69 73 76 80 83 87 91 94
psi 40 44 47 51 54 14.5R15 Kg 2425 2550 2650 2775 2875 2975 3100 3200 3300 3400 3500★★
lbs 5360 5620 5860 6100 6350 6600 6800 7050 7250 7500 7700 ★★
335/80R20 Kg 2425 2600 2750 2925 3075
15.5R25 Kg 5000 5150 5450 5600 5800★ 6150 6300 6500 6700 6900 7100★★
lbs 5380 5740 6100 6400 6800
lbs 11000 11400 12000 12300 12800 ★ 13600 13900 14300 14800 15200 15700 ★★
365/80R20 Kg 2900 3075 3275 3475 3650 17.5R25 6000 6150 6500 6700 7100★ 7300 7500 7750 8000 8250 8500★★
Kg
lbs 6400 6800 7200 7600 8000 lbs 13200 13600 14300 14800 15700 ★ 16100 16500 17100 17600 18200 18700 ★★
405/70R20 Kg 3075 3275 3475 3675 3875 20.5R25 Kg 8000 8250 8750 9000 9500★ 9750 10000 10300 10900 11200 11500★★
lbs 6800 7250 7650 8100 8550 lbs 17600 18200 19300 19800 20900 ★ 21500 22000 22700 24000 24700 25400 ★★
Note: Bold face figures denote maximum load for symbols shown. 23.5R25 Kg 10300 10600 11200 11500 12150★ 12500 12850 13200 13600 14000 14500★★
lbs 22700 23400 24700 25400 26800 ★ 27600 28300 29100 30000 30900 32000 ★★
26.5R25 Kg 12850 13200 14000 14500 15000★ 15500 16000 16500 17000 18000 18500★★
lbs 28300 29100 30900 32000 33100 ★ 34200 35300 36400 37500 39700 40800 ★★
29.5R25 Kg 15500 16000 17000 17500 18000★ 19000 19500 20000 20600 21200 22400★★
lbs 34200 35300 37500 38600 39700 ★ 41900 43000 44100 45400 46700 49400 ★★
29.5R29 Kg 16500 17000 18000 18500 19500★ 20000 20600 21200 22400 23000 23600★★
lbs 36400 37500 39700 40800 43000 ★ 44100 45400 46700 49400 50700 52000 ★★
Note: Bold face figures denote maximum load for symbols shown.
 ■Loader & Dozer Service
10km/h (5mph) Maximum Speed
Distance up to 76m (250ft) Table: R9
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 400 425 450 475 500 525 550 575 600 625 650
psi 58 62 65 69 73 76 80 83 87 91 94
650/65R25 Kg 9750 10000 10600 10900 11500★
lbs 21500 22000 23400 24000 25400★
750/65R25 Kg 12500 13200 13600 14000 15000★
(30/65R25) lbs 27600 29100 30000 30900 33100★
775/65R29 Kg 14500 15000 15500 16000 17000★
lbs 32000 33100 34200 35300 37500★
875/65R29 Kg 18000 18500 19500 20000 21200★
lbs 39700 40800 43000 44100 46700★
35/65R33 Kg 19500 20600 21200 22400 23000★ 23600 25000 25750 26500 27250 28000★★
lbs 43000 45400 46700 49400 50700★ 52000 55100 56800 58400 60000 61500★★
45/65R39 Kg 33500 34500 36500 37500 40000★
lbs 74000 76000 80500 82500 88000★
45/65R45 Kg 35500 37500 38750 40000 42500★ 43750 45000 46250 47500 50000 51500★★
lbs 78500 82500 85500 88000 93500★ 96500 99000 102000 104500 110000 113500★★
RADIAL TIRE LOAD AND INFLATION PRESSURE TABLES 33

Note: Bold face figures denote maximum load for symbols shown.

■Loader & Dozer Service

10km/h (5mph) Maximum Speed
Distance up to 76m (250ft) Table: R10
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 500 525 550 575 600 625 650 675 700
psi 73 76 80 83 87 91 94 98 102
55.5/80R57 Kg 82500 85000 87500 90000 92500 95000 100000 103000 106000
lbs 182000 187500 193000 198500 204000 209500 220500 227000 233500
Note: Bold face figures denote maximum load for symbols shown.
34

LOAD CAPACITIES FOR LOADER & DOZER SERVICE

(1)Excess Loads (2)The Variation in Load Carrying Capacity with Speed.
Due to the specialized nature of Off-The-Road vehicle usage, loads in excess of those in
the appropriate above-listed load tables are often encountered. Max Speed % Load Change
These excess loads result from items such as actual vehicle weight exceeding the design Static +60%
weight, varying density of materials, field modifications to the equipment, load transfer, etc. Creep +30%
Only under these conditions, the actual tire load in service may exceed the above load 4 km/h (2-1/2 mph) +15%
ratings in the tables (R6, R7, R8 & R9) for the tire by an amount not greater than shown 10 km/h (5 mph) No Change
in the following table:
* Tables R6, R7, R8 & R9
Maximum Excess Loads Over 10km/h (5mph): Consult a Bridgestone Representative.
Load *Pressure
Radial Tires 7% 14%

*When excess loads are encountered, cold inflation pressures must be increased to
compensate for higher loads. For each 1% increase in load, the inflation pressure must be
increased by 2%.
The inflation pressure should not exceed 825kPa (120psi).
The above maximum excess loads will result in reduced tire performance and MUST
BE APPROVED BY BRIDGESTONE.
 ■High-Speed Service Table: R11
Load Inflation
Tire Size Star Tire Load Limits at Various Speeds (100kPa=1bar)
Index Pressure
Designation Rating Speed bar km/h 0 CREEP 5 10 15 20 30 40 50 60 70 80 90 100
Symbol psi mph 0 CREEP 3 6 9 12 19 25 31 37 43 50 56 62
385/95R24 ★★★ 170 9.0 kg 17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600
(14.00R24) E 131 lbs 39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950
385/95R25 ★★★ 170 9.0 kg 17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600
(14.00R25) E 131 lbs 39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950
445/80R25 ★★ 170 7.0 kg 17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600
(17.5R25) E 102 lbs 39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950
445/95R25 ★★ 177 9.0 kg 21500 17500 15500 13400 12000 10800 9500 9050 8600 8100 7300 6000 5100 4375
(16.00R25) E 131 lbs 47500 38500 34200 29600 26400 23800 20900 20000 19000 18000 16100 13200 11300 9650
505/95R25 ★★ 186 9.0 kg 28000 22700 20200 17500 15600 14100 12300 11800 11200 10600 9500 7800 6650 5700
(18.00R25) E 131 lbs 61800 50200 44500 38500 34300 31000 27200 26000 24700 23400 20900 17200 14661 12566
525/80R25 ★★ 179 7.0 kg 22900 18600 16500 14300 12700 11500 10100 9600 9150 8700 7750 6350 5400 4650
(20.5R25) E 102 lbs 50400 40900 36300 31400 28000 25300 22200 21200 20200 19100 17100 14000 12000 10200
Note: Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116 psi).

■High-Speed Service
RADIAL TIRE LOAD AND INFLATION PRESSURE TABLES 35

88km/h (55mph) Maximum Speed (100kpa=1bar)

Tire Size Star Table: R12
Load Inflation Pressure
Designation Rating
★
7120 kg 580 kPa
24R21
15700 lbs 85psi

■Sand Service Table: R13

Tire Size Maximum Tire Cold Inflation Pressures at Various Load Limits (100kPa=1bar)
Designation Speed kg 4250 4500 4750 5000 5250 5500 6000 7000 8000 8500 9000 9500
lbs 9370 9920 10470 11020 11570 12130 13230 15430 17640 18740 19840 20940
65km/h kPa 490 540 580 630 680 720
40mph psi 71 78 84 91 98 105
50km/h kPa 390 420 450 490
16.00R20
30mph psi 57 61 65 71
16km/h kPa 280 300 320 350
10mph psi 41 44 47 51
65km/h kPa 330 410 490 540 590 630
40mph psi 48 60 71 78 85 92
50km/h kPa 260 320 390 420
21.00R25
30mph psi 38 47 57 61
16km/h kPa 200 230 280 300
10mph psi 28 34 41 44
Note: It is recommended that 90% of the above indicated loads per tire is to be applied when used on a dual axle.
36

■Industrial Service Table: R14

Inflation Tire Load Limits at Various Speeds (100kPa=1bar)
Tire Size Star Pressures
Designations Rating kPa 0 km/h 1 km/h 5 km/h 10 km/h 15 km/h 20 km/h 25 km/h 30 km/h
psi Static Creep 3 mph 5 mph 10 mph 12 mph 15 mph 18 mph
★★★ kg
12.00R20 1000 10700 10155 9350 9250 8660 8095 7100 6815
145 lbs 23540 22337 20570 20350 19056 17807 15620 14995
★★ kg
12.00R24 960 12400 11000 10000 9300 8950 8750 8600
139 lbs 27400 24300 22100 20500 19800 19300 19000
★★★ kg
14.00R24 1000 18000 16000 14500 13500 13000 12700 12500 12400
14.00R24 TG 145 lbs 39690 35280 31973 29768 28665 28004 27563 27342
★★ kg
16.00R25 960 21871 19441 17618 16403 15795 15431 15188 15066
139 lbs 48226 42867 38848 26169 34828 34025 33490 33221
★★ kg
18.00R25 960 28800 25600 23200 21600 20800 20320 20000 19840
139 lbs 63504 56448 51156 47628 45864 44806 44100 43747
★★★ kg
1000 30600 27200 24650 22950 22100 21590 21250 21080
145 lbs 67473 59976 54353 50605 48731 47606 46856 46481
★★★ kg
18.00R33 1000 35100 31200 28275 26325 25350 24765 24375 24180
145 lbs 77396 68796 62346 58047 55897 54607 53747 53317
★★ kg
23.5R25 690 26100 23200 21025 19575 18850 18415 18125 17980
100 lbs 57551 51156 46360 43163 41564 40605 39966 39646

Off-the-Road Tires Used for Industrial Vehicle Applications

1) Industrial Vehicles comprise vehicles such as counter-balanced lift trucks, container handlers, straddle carriers, aircraft tow tractors, mobile crushers, log stackers
etc., used on hard improved surfaces, smooth floors and runways.
2) Use Specifications of Industrial Service only.
3) To obtain the maximum permissible loads on lift truck Steering Wheels, multiply the above loads by 0.8.
4) Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116 psi).
5) For Speeds exceeding 30 km/h (18 mph), consult a Bridgestone Representative.
6) For tire sizes and star ratings other than listed above, consult a Bridgestone Representative.
 TON-KM-PER-HOUR (TKPH), TON-MILE-PER-HOUR (TMPH)
■TKPH (Ton-Km-Per-Hour) Rating Table at 38˚C Ambient Temperature—Radial Tires
Tires for Earthmover Service (Maximum Speed of 50km/h or less)
TRA
E2 E2 E2 E2 E3 E3 E4
Classification
Pattern VSB VHB VHS VKT VSW VSB VHB VHS VKT/VFT VEL/VRL VMT L317
Bridgestone
Code No. 2A 2A 1A 3A 2A 1A 3A 2A 1A 3A 2A 1A 3A
11.00R20 [188]
12.00R20 [208]
12R22.5 [188]
12.00R24 [177]
13.00R24
14.00R24.25
205(★3) 205(★3) 179(★3) 106(★3) 141(★3)
TON-KM-PER-HOUR (TKPH),TON-MILE-PER-HOUR (TMPH) 37

(385/95R24.25) 270 205 136

16.00R24.25
(445/95R24.25) 269 269 202 269
TIRE SIZE

18.00R25 183(★1)
(505/95R25) 348 348 193 239(★2) 181 224
18.00R33 227 281 328 213 263 307
21.00R35 284 351
24.00R35 448 524
24.00R49 455 562
27.00R49 557 688 804 521 644 753
30.00R51 1001 1171 897 1065
33.00R51 837 1018 1209
36.00R51 974 1185 1407
40.00R57 1204 1463 1739
[ ] WS Value
1100R20 (775kpa)
12R22.5 (815kpa)
1200R20 (775kpa)
1200R24 (770kpa)
38

■TKPH (Ton-Km-Per-Hour) Rating Table at 38˚C Ambient Temperature—Radial Tires

Tires for Earthmover Service (Maximum Speed of 50km/h or less)
TRA
E4 E4 E4 E4 E4 E4
Classification
Pattern VMTS VMTP VRLS/VELS VELSL VZTS VRDP
Bridgestone
Code No. 2A 1A 3A 2A 1A 3A 2A 1A 3A 3A 2A 1A 3A 2A 1A 3A
14.00R24.25 91 119 136 85
16.00R25 123 112 146
18.00R25 169 209 244 144 179
18.00R33 199 246 287 185 229 267 170 211 246
21.00R33 227 281
21.00R35 265 328 383 237 293 227 281 328
24.00R35 338 418 489 314 388 314 388 453
24.00R49 398 492 575 361 522 341 421 492
27.00R49 486 600 702 440 544 636 415 513 600
TIRE SIZE

31/90R49 427 528 618

30.00R51 496 603 717
33.00R51 660 802 953 591 700 558 679 807
36.00R51 642 781 927
37.00R57 694 845 1003 1200 694 845 1003
42/90R57 (715) (870) (1033)
40.00R57 773 940 1117 1400 773 940 1117 773 940 1117
46/90R57 796 968 1150 796 968 1150
50/90R57 884 1092 1278
53/80R63 974 1150 1408
*1045 *1233 *1512
55/80R63 *1137 *1341 *1643
59/80R63 1138 1404 1643
 ■TKPH (Ton-Km-Per-Hour) Rating Table at 38˚C Ambient Temperature—Radial Tires
Wide Base Tires for Earthmover Service (Maximum Speed of 50km/h or less)
TRA Classification E2 E2 E3 E3 E3 E4 E4 E4
Pattern VHB VHS VKT VGT VGT VKT VLT VMT VRL VALS VLTS VSNT
Bridgestone
Code No. 3A 2A 1A 3A 2A 2A 1A 2A 1A 3A 2A 2A 2A
★
24R21 520
★
17.5R25 145 95
★★
(445/80R25) 180 144
★
20.5R25 129 166
★★
(525/80R25) 308 308 232 160 206 232 149 149 194 114 126
★
23.5R25 166 213 153 201 129
★★
205 263 190 190 248 146 161
★★
26.5R25 257 312 220 220 293 186 165
★★
29.5R25 310 376 420 266 266 354 225 220
★★
29.5R29 330 401 232
TON-KM-PER-HOUR (TKPH),TON-MILE-PER-HOUR (TMPH) 39

TIRE SIZE

★★
33.25R29 407 494 319 435
★★
33.5R33 444 539
★★
37.5R33 648
★★
29.5R35 380
★★
33.25R35 441 346 472
★★
37.25R35 530 644 720 413 563
★★
37.5R39 696 608
★★
40.5/75R39 495 675 765
★★
25/65R25 162
★★
30/65R25 225
(750/65R25)
35/65R33 250
40

■TMPH (Ton-Mile-Per-Hour) Rating Table at 100˚F Ambient Temperature—Radial Tires

Tires for Earthmover Service (Maximum Speed of 50km/h or less)
TRA
E2 E2 E2 E2 E3 E3 E4
Classification
Pattern VSB VHB VHS VKT VSW VSB VHB VHS VKT/VFT VEL/VRL VMT L317
Bridgestone
Code No. 2A 2A 1A 3A 2A 1A 3A 2A 1A 3A 2A 1A 3A
11.00R20 [129]
12.00R20 [142]
12R22.5 [129]
12.00R24 [121]
13.00R24
14.00R24.25
(385/95R24.25) 185 140( ★3) 140( ★3) 140 123( ★3) 93 73( ★3) 97( ★3)
16.00R24.25
(445/95R24.25) 184 184 138 184
TIRE SIZE

18.00R25 125( ★1)

(505/95R25) 238 238 132 164( ★2) 124 153
18.00R33 155 192 225 146 180 210
21.00R35 195 240
24.00R35 307 359
24.00R49 312 385
27.00R49 382 471 551 357 441 516
30.00R51 686 802 614 729
33.00R51 573 697 828
36.00R51 667 812 964
40.00R57 825 1002 1191
[ ] WS Value
1100R20 (775kpa)
12R22.5 (815kpa)
1200R20 (775kpa)
1200R24 (770kpa)
 ■TMPH (Ton-Mile-Per-Hour) Rating Table at 100˚F Ambient Temperature—Radial Tires
Tires for Earthmover Service (Maximum Speed of 50km/h or less)
TRA
E4 E4 E4 E4 E4 E4
Classification
Pattern VMTS VMTP VRLS/VELS VELSL VZTS VRDP
Bridgestone
Code No. 2A 1A 3A 2A 1A 3A 2A 1A 3A 3A 2A 1A 3A 2A 1A 3A
14.00R24.25 62 82 93 58
16.00R25 84 77 100
18.00R25 116 143 167 99 123
18.00R33 136 168 197 127 157 183 116 145 168
21.00R33 155 192
21.00R35 182 225 262 162 201 155 192 225
24.00R35 232 286 335 215 266 215 266 310
24.00R49 273 337 394 247 358 234 288 337
27.00R49 333 411 481 301 373 436 284 351 411
TON-KM-PER-HOUR (TKPH),TON-MILE-PER-HOUR (TMPH) 41

TIRE SIZE

31/90R49 292 362 423

30.00R51 340 413 491
33.00R51 452 549 653 405 479 382 465 553
36.00R51 440 535 635
37.00R57 475 579 687 822 475 579 687
42/90R57 (490) (596) (708)
40.00R57 529 644 765 959 529 644 765 529 644 765
46/90R57 545 663 788 545 663 788
50/90R57 605 748 875
53/80R63 667 788 964
*716 *845 *1036
55/80R63 *779 *918 *1125
59/80R63 779 962 1125
42

■TMPH (Ton-Mile-Per-Hour) Rating Table at 100˚F Ambient Temperature—Radial Tires

Wide Base Tires for Earthmover Service (Maximum Speed of 50km/h or less)
TRA Classification E2 E2 E3 E3 E3 E4 E4 E4
Pattern VHB VHS VKT VGT VGT VKT VLT VMT VRL VALS VLTS VSNT
Bridgestone
Code No. 3A 2A 1A 3A 2A 2A 1A 2A 1A 3A 2A 2A 2A
★
24R21 356
★
17.5R25 99 65
★★
(445/80R25) 123 99
★
20.5R25 88 114
★★
(525/80R25) 211 211 159 110 141 159 102 102 133 78 86
★
23.5R25 114 146 105 138 88
★★
140 180 130 130 170 100 110
★★
26.5R25 176 214 151 151 201 127 113
★★
29.5R25 212 258 288 182 182 242 154 151
★★
29.5R29 226 275 159
TIRE SIZE

★★
33.25R29 279 338 218 298
★★
33.5R33 304 369
★★
37.5R33 444
★★
29.5R35 260
★★
33.25R35 302 237 323
★★
37.25R35 363 441 493 283 386
★★
37.5R39 477 416
★★
40.5/75R39 339 462 524
★★
25/65R25 111
★★
30/65R25 154
(750/65R25)
35/65R33 171
 LOAD-AND-CARRY OPERATIONS FOR FRONT END LOADER
SERVICE
Service conditions of a loader is defined as “picking up material and relocating a short distance
away, a maximum of 76m (250 feet), one way, with a maximum speed of 10km/h (5mph)”. However,
a loader can pick up a load and transport such load to another location and return unloaded for a
longer distance. This type of service is called Load-and-Carry operations. Transportation usually
occurs at low speeds, up to 25km/h (15 mph), and distances are limited.
The tires when used in Load-and-Carry operations may encounter heat problems especially on the
front axle tires. To avoid such problems, Bridgestone recommends the following operating
conditions.
For tires over 33" inch rim diameter tires, careful study is required to maximize tire life while
considering Ton-Mile-Per-Hour limits. Please consult Bridgestone representative for more
information.
If you need to use the tire beyond this recommendation, please consult Bridgestone representative.
TON-KM-PER-HOUR (TKPH),TON-MILE-PER-HOUR (TMPH) 43

For Radial Tires

Inflation Pressure
Rim Diameter
Maximum Cycle Allowable Average
Tread 29" and below 33" and above Load Capacity* Work-shift Speed
Distance
Class Conventional size Wide base size Wide base size 10km/h (5mph) (m) (km/h)
(95 series) (85, 65 series) (65 series)

★ ★★ ★ ★★ ★ ★★

L2, L3 16
1800
L4 14
550kpa 825kpa 500kpa 650kpa 600kpa 750kpa 100% of
1500 (VSDT) 10
L5 (80psi) (120psi) (73psi) (94psi) (87psi) (109psi) STD.load
1200 (VSDL) 6
L5S 1200 5
* STD.load: Maximum permissible load at standard inflation pressure for respective tire size and star rating.
Please refer to the load - inflation pressure table for loader and dozer service “10km/h (5mph) service” .
BIAS TIRE TREAD DESIGNS
■Earthmover Service
E3

W-LUG R-LUG V-LUG2

(WL) (RL) (VL2)

E4

R-LUG S E-LUG S2
(RLS) (ELS2)

■Grader Service
G1 G2

RIB GRADER G-LUG FAST GRIP

(RG) (GL) (FG)

44
 G3 G4

R-LUG R-LUG S
(RL) (RLS)

■Loader & Dozer Service

L2 L3

FAST GRIP G-LUG V GRIP R-LUG V-LUG2

(FG) (GL) (VG) (RL) (VL2)

L4 L4S

R-LUG S R-LUG S2 N-LUG SMOOTH TREAD-M

(RLS) (RLS2) (NL) (STM)

BIAS TIRES TREAD DESIGNS 45

 L5 L5S

M-LUG S D-LUG D-LUG 2 SMOOTH TREAD-MS

(MLS) (DL) (DL2) (STMS)

■Compactor Service ■Logging Service

C1 C2

ROAD ROLLER ALLIGATOR 2 FAST GRIP TIMBER GRIP-S

(RR) (AL2) (FG) (TGS)

■Sand Service
E7

ALLIGATOR SAND CLIPPER-2

(AL) (SCP2)

46
■Industrial Service

R-LUG R-LUG S E-LUG S2

(RL) (RLS) (ELS2)

V-LUG 2 SMOOTH TREAD-MS YARD SERVICE-2

(VL2) (STMS) (YS2)

BIAS TIRES TREAD DESIGNS 47

APPLICATION OF BIAS TIRES
■Earthmover Service
HEAT RESISTANT CUT RESISTANT

TRACTION
WL

VL2 RLS
RL
ELS2

Size Type Ply Rating Size Type Ply Rating

RL(E3) WL(E3)
10.00-20 T/T 14 8.25-20 T/T 12
11.00-20 T/T 14 16 9.00-20 T/T 14
12.00-20 T/T 16 18 12.00-24 T/T 16
12.00-24 T/T 20
VL2(E3)
14.00-24 T/T 20 24 28
20.5-25 T/L 16 20 24
16.00-24 TG T/L 16
23.5-25 T/L 16 20 24
16.00-24 T/T 24
26.5-25 T/L 20 24 26
14.00-25 T/L 20 24
29.5-25 T/L 22 28
14.00-25 T/T 24
16.00-25 T/L 24 28 32 RLS(E4)
16.00-25 T/T 24 28 16.00-25 T/L 24 28
18.00-25 T/L 16 32 16.00-25 T/T 24
18.00-25 T/T 32 18.00-25 T/L 24 32
21.00-25 T/L 24 32 18.00-33 T/L 32 36
29.5-29 T/L 28 34 21.00-35 T/L 36
18.00-33 T/L 32 24.00-35 T/L 36 42
33.5-33 T/L 38 24.00-49 T/L 42 48
21.00-35 T/L 32 36 40 27.00-49 T/L 42 48
29.5-35 T/L 28 34 30.00-51 T/L 46 52 58
33.25-35 T/L 32 38 ELS2(E4)
37.25-35 T/L 30 36 18.00-25 T/L 32
37.5-39 T/L 44 52 18.00-25 T/T 32
24.00-49 T/L 48 18.00-33 T/L 32 36
21.00-35 T/L 36 40

T/T: Tube Type

T/L: Tubeless Type
TG: For Semi-Drop Center Rim

48
■ Grader Service
HEAT RESISTANT CUT RESISTANT

GL FG

TRACTION
RG RL RLS

Size Type Ply Rating

RG(G1)
9.00-20 T/T 10
GL(G2)
9.00-20 T/T 12 14
FG(G2)
10.00-20 T/T 10 12 14 16
11.00-20 T/T 10 12 16
13.00-24 T/T 10 12
13.00-24 TG T/L 12
13.00-24 TG T/T 12 16
14.00-24 TG T/L 12 14 16
14.00-24 TG T/T 12 16
16.00-24 TG T/L 12
16.00-24 TG T/T 12 16
17.5-25 T/L 12 16
17.5-25 T/T 12 16
20.5-25 T/L 12 16
20.5-25 T/T 12 16
RL(G3)
16.00-24 TG T/T 16
18.00-25 T/L 16
RLS(G4)
23.5-25 T/L 16

T/T: Tube Type

T/L: Tubeless Type
TG: For Semi-Drop Center Rim

APPLICATION OF BIAS TIRES 49

 ■ Loader & Dozer Service
HEAT RESISTANT CUT RESISTANT

VG
TRACTION

GL FG

RL VL2 RLS RLS2

Size Type Ply Rating Size Type Ply Rating Size Type Ply Rating

FG(L2) FG(L2) GL
5.70-12 T/L 4 13.00-24 T/L 12 9.00-20 T/T 12 14
5.70-12 T/T 4 13.00-24 T/T 12
23X8.50-12 T/L 4 13.00-24 TG T/L 12 VG
23X8.50-12 T/T 4 13.00-24 TG T/T 12 22/70-24 T/L 12
5.50-15 T/T 6 14.00-24 TG T/T 12
RL(L3)
7.50-15 T/T 4 16.9-24 T/L 10
12.00-20 T/T 20
27X8.50-15 T/L 4 16.9-24 T/T 10
12.00-24 T/T 16 20
27X8.50-15 T/T 4 18.4-24 T/L 10
13.00-24 TG T/L 12
10-15 T/T 6 10 18.4-24 T/T 10
13.00-24 TG T/T 12 16
12/65-15 T/T 10 19.5-24 T/T 16
14.00-24 T/T 24
33x12.5-15 T/T 68 15.5-25 T/L 12
14.00-24 TG T/L 12 16
14.0/65-15 T/L 8 15.5-25 T/T 12
14.00-24 TG T/T 12 16
12.5/70-16 T/L 68 17.5-25 T/L 12 16
16.00-24 TG T/L 16
10-16.5 T/L 468 17.5-25 T/T 12 16
16.00-24 TG T/T 16
12-16.5 T/L 68 20.5-25 T/L 12 16
16.9-24 T/L 10
12-16.5 T/T 8 20.5-25 T/T 12 16
16.9-24 T/T 10
10-18 T/T 10 23.5-25 T/L 12 16 20
18.00-25 T/T 32
12.5/65-18 T/L 8 23.5-25 T/T 16
18.00-25 T/L 12 16 24
15.5/60-18 T/L 8 26.5-25 T/L 16
29.5-29 T/L 28
15.5/70-18 T/L 8 16.9-28 T/T 8 10
15.5/70-18 T/T 8 16.9-30 T/T 10
10.00-20 T/T 10 12 14 16
11.00-20 T/T 10 12 16
13.5-20 TG T/T 10
42X17-20 T/T 6 10
17.5/65-20 T/L 10 T/T: Tube Type
17.5/65-20 T/T 10 T/L: Tubeless Type
15.5/70-20 T/L 10 TG: For Semi-Drop Center Rim

50
 HEAT RESISTANT CUT RESISTANT

TRACTION
NL
DL MLS
STM DL2 STMS

Size Type Ply Rating Size Type Ply Rating Size Type Ply Rating

VL2(L3) NL(L4) MLS(L5)

15.5-25 T/L 12 35/65-33 T/L 24 30 42 12.00-24 T/T 16
15.5-25 T/T 12 45/65-45 T/L 38 50 58 DL2(L5)
17.5-25 T/L 12 16 20 STM(L4S) 35/65-33 T/L 24 30
17.5-25 T/T 12 16 45/65-45 T/L 38 46
9.00-10 T/T 12
20.5-25 T/L 12 16 20 24
20.5-25 T/T 12 16 20 DL(L5) STMS(L5S)
23.5-25 T/L 12 16 20 24 17.5-25 T/L 16 12.00-24 T/T 16 20
23.5-25 T/T 12 16 20 24 20.5-25 T/L 12 16 28 14.00-24 T/T 20
26.5-25 T/L 16 20 24 26 28 32 23.5-25 T/L 16 20 16.00-25 T/L 24
26.5-25 T/T 20 24 26.5-25 T/L 20 26 32 36 17.5-25 T/L 16 20
29.5-25 T/L 22 28 29.5-25 T/L 22 28 18.00-25 T/L 24 28 32
29.5-29 T/L 28 34 18.00-25 T/T 24
RLS(L4) 35/65-33 T/L 24 30 42 20.5-25 T/L 16
14.00-24 T/T 20 33.25-35 T/L 32 20.5-25 T/T 28
18.00-25 T/T 32 37.25-35 T/L 36 21.00-25 T/L 32
20.5-25 T/L 16 37.5-39 T/L 44 23.5-25 T/L 20 24
23.5-25 T/L 16 20 40/65-39 T/L 30 36 56 26.5-25 T/L 26 32 36
26.5-25 T/L 20 26 32 41.25/70-39 T/L 34 42 26.5-25 T/T 32
29.5-25 T/L 28 45/65-45 T/L 38 46 50 58 29.5-29 T/L 28 34
29.5-29 T/L 28 50/65-51 T/L 62
RLS2(L4) 67.5/60-51 T/L 84
29.5-29 T/L 28 55.5/80-57 T/L 68 84
65/65-57 T/L 62

T/T: Tube Type

T/L: Tubeless Type

APPLICATION OF BIAS TIRES 51

 ■ Compactor Service
Size Type Ply Rating

RR
7.50-15 T/T 12
95/65-15 T/T 6
7.50-16 T/T 6
7.50-16 T/L 6
RR 10.5/80-16 T/L 6
12.00-16 T/T 10
8.25-20 T/T 10
9.00-20 T/T 10
11.00-20 T/T 12
12.00-20 T/T 14
14/70-20 T/T 12
AL2 13.00-24 T/T 26

AL2
23.1-26 T/L 8
23.1-26 T/T 8

■ Logging Service
FG
22/65-25 T/L 16

FG
TGS
23.1-26 T/T 10
24.5-32 T/T 16
30.5L-32 T/T 16
23.1-34 T/T 14
TGS

■ Sand Service
AL
9.00-15 T/T 6

AL
SCP2
14.00-20 T/T 12 18
16.00-20 T/T 12

T/T: Tube Type

SCP2 T/L: Tubeless Type

52
■ Industrial Service Size Type Ply Rating

RL
10.00-20 T/T 16
11.00-20 T/T 16
12.00-20 T/T 20
RL 12.00-24 T/T 20
14.00-24 T/T 24 28
14.00-24 TG T/L 24
16.00-25 T/T 28
16.00-25 T/L 28 32
18.00-25 T/L 36 40
21.00-25 T/L 32 36 40

RLS
14.00-24 TG T/L 24 28
16.00-25 T/L 28 32
23.5-25 T/L 36
RLS

ELS2
18.00-25 T/L 36 40
18.00-33 T/L 36
21.00-35 T/L 40

ELS2

VL2
23.5-25 T/L 36

VL2

STMS
12.00-24 T/T 20
18.00-25 T/L 36 40

STMS

YS2
16.00-25 T/L 28 32

YS2

APPLICATION OF BIAS TIRES 53

54

BIAS TIRE TECHNICAL DATA Approximate Inflated Dimensions Minimum

TRA Code Recommended
Tire Size or Pattern Ply Rating Type Rim/ OD OW SLR SLW OTD Dual Spacing
Application Flange Height (inch) inch mm inch mm inch mm inch mm mm inch mm
9.00-10 L4S STM 12 T/T 5.50F,6.00F 28.1 713 9.2 233 12.9 328 9.6 245 31.5 - -
5.70-12 L2 FG 4 T/T(T/L) 5JA 22.4 570 6.0 153 10.4 265 6.4 163 15.5 - -
23x8.50-12 L2 FG 4 T/T(T/L) 7JA 22.4 570 8.5 215 10.4 263 8.7 221 14.5 - -
5.50-15 L2 FG 6 T/T 4.50E 26.5 674 5.9 150 12.1 307 6.3 161 16.5 - -
7.50-15 L2 FG 4 T/T 6.00GS 30.8 782 8.2 208 13.8 351 9.3 235 19.5 - -
C1 RR 12 T/T 6.00GS 30.5 775 8.2 209 14.2 360 8.9 225 - 9.8 250
27x8.50-15 L2 FG 4 T/T(T/L) 7JA 27.0 686 8.2 208 12.4 316 8.7 221 16.5 - -
9.00-15 E7 AL 6 T/T 5.1/2K, 5.50F 33.5 851 9.7 247 14.8 377 10.9 277 8.0 - -
95/65-15 C1 RR 6 T/T 7JA 26.4 671 9.6 243 12.4 315 9.8 250 - 10.6 270
10-15 L2 FG 6 10 T/T 9.00F 30.1 765 9.6 245 14.0 355 10.8 274 20.0 - -
12/65-15 L2 FG 10 T/T 10.00F 30.6 777 12.3 312 13.9 353 12.5 318 19.0 - -
33x12.5-15 L2 FG 68 T/T 10.00F 33.5 851 12.5 318 15.2 385 13.2 336 22.5 - -
14.0/65-15 L2 FG 8 T/L 11LB 33.7 856 14.1 357 15.1 383 14.5 369 22.5 - -
7.50-16 C1 RR 6 T/T(T/L) 6.00GS(6LB) 32.1 815 8.7 221 15.0 380 9.4 238 - 9.8 250
10.5/80-16 C1 RR 6 T/L 8LB 31.8 807 10.8 275 14.9 378 11.3 287 - 11.9 302
12.00-16 C1 RR 10 T/T 8.50V 40.0 1015 12.6 321 18.3 466 13.7 347 - 14.9 378
12.5/70-16 L2 FG 68 T/L 10LB 33.6 854 12.7 322 15.1 384 13.2 336 21.0 - -
10-16.5 L2 FG 468 T/L 8.25 30.4 771 10.6 268 13.7 347 10.9 278 19.5 - -
12-16.5 L2 FG 68 T/L(T/T) 9.75 32.8 833 12.4 315 14.8 377 12.7 323 20.0 - -
10-18 L2 FG 10 T/T 9.00GS 35.5 902 10.1 257 15.7 400 11.2 284 19.0 - -
12.5/65-18 L2 FG 8 T/L W10 34.6 879 12.4 315 15.9 405 12.9 327 19.5 - -
15.5/60-18 L2 FG 8 T/L W13 36.7 932 15.4 391 16.5 418 16.0 406 21.5 - -
15.5/70-18 L2 FG 8 T/L(T/T) W13 40.8 1036 15.7 400 18.1 460 16.5 419 20.5 - -
8.25-20 E3 WL 12 T/T 6.50T 38.9 988 9.4 238 17.7 450 9.9 252 18.0 11.2 284
C1 RR 10 T/T 6.50T 38.3 974 9.4 240 17.6 446 9.7 247 - 11.2 284
9.00-20 G1 RG 10 T/T 7.00T 40.3 1023 10.5 267 18.6 473 11.3 288 15.0 - -
G2 L2 GL 12 14 T/T 7.00T 40.3 1023 10.0 255 18.5 469 10.9 278 21.0 12.2 310
E3 WL 14 T/T 7.00T 40.4 1027 10.1 257 18.3 466 11.0 280 19.5 12.2 310
C1 RR 10 T/T 7.00T 39.6 1005 10.4 265 18.7 474 11.0 280 - 12.2 310
 TRA Code Recommended Approximate Inflated Dimensions Minimum
Tire Size or Pattern Ply Rating Type Rim/ OD OW SLR SLW OTD Dual Spacing
Application Flange Height (inch) inch mm inch mm inch mm inch mm mm inch mm
10.00-20 G2 L2 FG 10 12 14 16 T/T 7.50V 41.9 1064 11.1 281 18.6 472 12.3 312 24.0 - -
E3 RL 14 T/T 7.50V 42.0 1067 11.2 285 19.8 502 11.3 286 22.5 13.1 334
Industrial Service RL 16 T/T 7.50V 42.0 1067 11.2 285 19.8 502 11.3 286 22.5 13.1 334
11.00-20 C1 RR 12 T/T 8.00V 41.5 1054 11.6 295 18.8 478 12.6 321 - 13.9 352
G2 L2 FG 10 12 16 T/T 8.00V 43.3 1100 11.8 299 18.6 472 12.3 312 24.5 13.9 352
E3 RL 14 16 T/T 8.00V 42.9 1090 11.7 296 19.9 506 12.2 311 24.0 13.9 352
Industrial Service RL 16 T/T 8.00V 42.9 1090 11.7 296 19.9 506 12.2 311 24.0 13.9 352
12.00-20 C1 RR 14 T/T 8.50V 43.7 1110 12.4 315 20.2 513 13.6 346 - 14.9 378
E3 L3 RL 16 18 20 T/T 8.50V 44.8 1138 12.4 316 21.1 536 13.0 331 25.5 15.0 382
Industrial Service RL 20 T/T 8.50V 44.8 1138 12.4 316 21.1 536 13.0 331 25.5 15.1 384
13.5-20 TG L2 FG 10 T/T 11.00TG 42.7 1084 14.1 357 19.1 485 15.0 381 25.0 - -
14.00-20 E7 SCP2 12 T/T 7.50V 47.5 1206 13.9 354 19.8 504 15.6 395 10.5 - -
E7 SCP2 18 T/T 9.00V 47.5 1206 14.6 370 22.0 559 15.7 400 10.5 - -
42x17-20 L2 FG 6 10 T/T 14.00TG 42.4 1077 17.0 431 19.7 500 17.3 440 25.5 - -
16.00-20 E7 SCP2 12 T/T 9.00V 52.0 1320 16.5 419 23.3 592 16.9 428 14.5 - -
17.5/65-20 L2 FG 10 T/L(T/T) W14L 43.6 1107 17.7 450 19.1 486 18.5 470 25.0 - -
14/70-20 C1 RR 12 T/T 11.00TG 38.2 970 14.8 375 17.8 451 15.2 385 - 16.8 426
15.5/70-20 L2 FG 10 T/L W13 41.9 1063 15.8 401 18.7 476 16.5 419 21.5 - -
12.00-24 L3 E3 RL 16 20 T/T 8.5, 8.50V 48.5 1232 12.5 318 22.0 560 13.8 351 24.5 15.4 391
E3 WL 16 T/T
L5 MLS 16 T/T 8.50V 50.2 1275 12.6 321 23.6 600 13.3 339 57.5 - -
L5S STMS 16 20 T/T 8.50V 50.2 1275 12.6 321 23.9 606 13.3 339 55.0 - -
Industrial Service RL 20 T/T 8.5, 8.50V 48.5 1232 12.5 318 22.0 560 13.8 351 24.5 15.4 391
BIAS TIRE TECHNICAL DATA 55

Industrial Service STMS 20 T/T 8.50V 50.2 1275 12.6 321 23.9 606 13.3 339 55.0 15.4 391
13.00-24 TG G2 L2 FG 12 16 T/L(T/T) 8.00TG(10.00VA) 50.6 1286 13.1 334 21.8 554 14.9 378 28.0 - -
L3 RL 12 16 T/L(T/T) 8.00TG 51.5 1308 13.7 349 23.0 583 15.4 391 26.5 - -
13.00-24 C1 RR 26 T/T 10.00W 50.9 1292 14.3 364 22.4 570 16.0 407 - 16.5 418
G2 L2 FG 10 12 T/T(T/L) 8.00TG 50.6 1286 13.4 340 21.7 550 14.9 378 28.0 - -
56

TRA Code Recommended Approximate Inflated Dimensions Minimum

Tire Size or Pattern Ply Rating Type Rim/ OD OW SLR SLW OTD Dual Spacing
Application Flange Height (inch) inch mm inch mm inch mm inch mm mm inch mm
14.00-24 TG L2 G2 FG 12 14 16 T/L(T/T) 8.00TG(10.00VA) 52.6 1336 14.8 375 23.9 606 14.7 374 31.0 - -
L3 RL 12 16 T/L(T/T) 8.00TG(10.00VA) 53.3 1355 15.2 387 24.2 614 16.1 410 28.0 17.7 450
Industrial Service RL 24 T/L 10.00VA 53.3 1355 15.2 387 24.2 614 16.1 410 28.0 17.7 450
Industrial Service RLS 24 28 T/L 10.00VA 55.4 1407 15.4 390 25.4 646 17.3 440 48.0 - -
14.00-24 E3 L3 RL 20 24 28 T/T 10.00W 53.3 1355 14.4 367 24.7 627 15.7 400 28.0 17.7 450
L4 RLS 20 T/T 10.00W 55.4 1407 15.4 390 25.4 646 17.3 440 48.0 17.7 450
L5S STMS 20 T/T 10.00W 54.1 1373 14.4 367 25.4 646 15.4 391 78.0 - -
Industrial Service RL 24 28 T/T 10.00W 53.3 1355 14.4 367 24.7 627 15.7 400 28.0 17.7 450
16.00-24 TG G2 FG 12 16 T/L(T/T) 10.00VA 57.6 1463 17.0 433 25.1 638 19.7 500 32.5 - -
L3 E3 G3 RL 16 T/L(T/T) 10.00VA 58.2 1478 16.5 419 26.4 671 17.6 446 33.5 20.2 513
16.00-24 E3 RL 24 T/T 11.25/2.0 58.2 1478 17.0 432 26.4 671 18.1 459 33.5 20.2 513
16.9-24 L2 FG 10 T/T(T/L) W15L 52.0 1320 17.6 447 23.3 591 18.2 462 30.5 - -
L3 RL 10 T/T(T/L) W15L 51.9 1318 17.6 447 23.8 604 18.2 463 32.0 - -
18.4-24 L2 FG 10 T/T(T/L) W16L 54.1 1375 19.0 483 24.1 612 20.3 516 32.5 - -
19.5-24 L2 FG 16 T/T (16.00T) 55.1 1400 19.9 505 24.9 632 20.6 523 24.5 - -
22/70-24 L2 VG 12 T/L 16.00T 54.7 1390 21.6 548 25.8 656 21.8 553 30.0 - -
14.00-25 E3 RL 20 24 T/T(T/L) 10.00/1.5 53.3 1355 15.0 380 24.7 627 15.7 400 28.0 17.7 450
15.5-25 L2 FG 12 T/T(T/L) 12.00/1.3 50.6 1284 15.7 410 22.2 565 15.7 399 23.5 - -
L3 VL2 12 T/L(T/T) 12.00/1.3 50.6 1284 15.6 410 22.4 568 17.6 448 27.0 - -
16.00-25 E3 RL 24 28 32 T/L(T/T) 11.25/2.0 58.2 1478 17.0 432 26.4 671 18.1 459 33.5 20.2 513
E4 RLS 24 28 T/L(T/T) 11.25/2.0 60.9 1548 17.7 450 28.4 722 18.1 460 57.0 20.2 513
L5S STMS 24 T/L 11.25/2.0 60.5 1537 17.7 450 28.3 720 18.1 460 76.5 - -
Industrial Service RL 28 32 T/L(T/T) 11.25/2.0 58.2 1478 17.0 432 26.4 671 18.1 459 33.5 20.2 513
Industrial Service RLS 28 32 T/L 11.25/2.0 60.9 1548 17.7 450 28.4 722 18.1 460 57.0 20.2 513
Industrial Service YS2 28 32 T/L 11.25/2.0 57.7 1465 16.9 430 25.9 658 18.6 472 49.2 20.2 513
17.5-25 L2 G2 FG 12 16 T/L(T/T) 14.00/1.5 53.0 1345 17.7 450 23.5 596 18.6 472 27.5 - -
L3 VL2 12 16 20 T/L(T/T) 14.00/1.5 53.1 1348 17.5 444 23.5 597 18.5 470 30.5 - -
L5 DL 16 T/L 14.00/1.5 55.5 1410 17.5 445 25.8 656 18.5 470 69.5 - -
L5S STMS 16 20 T/L 14.00/1.5 54.5 1385 17.7 450 25.4 645 18.2 462 69.0 - -
 TRA Code Recommended Approximate Inflated Dimensions Minimum
Tire Size or Pattern Ply Rating Type Rim/ OD OW SLR SLW OTD Dual Spacing
Application Flange Height (inch) inch mm inch mm inch mm inch mm mm inch mm
18.00-25 E3 L3 G3 RL 12 16 24 32 T/L(T/T) 13.00/2.5 63.1 1602 19.8 503 28.6 727 22.5 572 37.5 23.1 587
E4 L4 RLS 24 32 T/L(T/T) 13.00/2.5 64.6 1642 20.3 515 29.3 745 22.8 578 57.5 23.1 587
E4 ELS2 32 T/L(T/T) 13.00/2.5 66.3 1685 20.9 530 31.3 796 21.5 545 66.5 23.1 587
L5S STMS 24 28 32 T/L(T/T) 13.00/2.5 65.9 1675 20.5 520 30.0 762 21.7 550 84.0 - -
Industrial Service RL 36 40 T/L 13.00/2.5 63.1 1602 20.0 508 28.6 727 22.5 572 37.5 23.1 587
Industrial Service ELS2 36 40 T/L 13.00/2.5 66.3 1685 20.3 515 31.3 796 20.9 530 66.5 23.1 587
Industrial Service STMS 36 40 T/L 13.00/2.5 65.9 1675 20.5 520 30.0 762 21.7 550 84.0 23.1 587
20.5-25 L2 G2 FG 12 16 T/L(T/T) 17.00/2.0 58.8 1493 21.0 534 25.7 652 21.7 551 29.5 - -
L3 E3 VL2 12 16 20 24 T/L(T/T) 17.00/2.0 58.3 1482 21.4 544 25.2 641 23.1 587 33.0 - -
L4 RLS 16 T/L 17.00/2.0 60.9 1546 21.3 540 27.5 698 23.0 584 63.0 - -
L5 DL 12 16 28 T/L 17.00/2.0 61.3 1558 21.6 548 28.1 714 22.4 570 79.5 - -
L5S STMS 16 28 T/L(T/T) 17.00/2.0 61.3 1558 21.6 550 28.9 734 22.7 580 77.0 - -
21.00-25 E3 RL 24 32 T/L 15.00/3.0 68.7 1745 22.8 580 30.5 775 24.4 620 41.0 - -
L5S STMS 32 T/L 15.00/3.0 70.8 1798 22.6 574 32.2 819 24.1 612 90.5 - -
Industrial Service RL 32 36 40 T/L 15.00/3.0 68.7 1745 22.8 580 30.5 775 24.4 620 41.0 26.3 668
22/65-25 LS FG 16 T/L 17.00/2.0 54.5 1384 23.1 587 24.6 626 25.7 654 26.5 - -
23.5-25 L2 FG 12 16 20 T/L(T/T) 19.50/2.5 63.6 1615 24.6 625 27.8 708 26.7 678 33.5 - -
L3 E3 VL2 12 16 20 24 T/L(T/T) 19.50/2.5 63.3 1607 24.3 618 26.9 682 27.1 688 43.0 - -
L4 G4 RLS 16 20 T/L 19.50/2.5 65.3 1658 24.2 615 28.5 724 26.3 668 67.5 - -
L5 DL 16 20 T/L 19.50/2.5 65.9 1673 24.3 616 30.7 779 25.4 646 88.0 - -
L5S STMS 20 24 T/L 19.50/2.5 66.1 1679 24.3 618 30.6 776 25.9 658 96.0 - -
Industrial Service VL2 36 T/L 19.50/2.5 63.3 1607 24.3 618 26.9 682 27.1 688 43.0 27.4 695
Industrial Service RLS 36 T/L 19.50/2.5 65.3 1658 24.2 615 28.5 724 26.3 668 67.5 27.4 695
BIAS TIRE TECHNICAL DATA 57

26.5-25 L2 FG 16 T/L 22.00/3.0 68.9 1750 26.7 678 30.2 768 28.9 734 42.0 - -
L3 E3 VL2 16 20 24 26 28 32 T/L(T/T) 22.00/3.0 68.4 1738 26.9 683 29.3 745 28.9 734 44.0 - -
L4 RLS 20 26 32 T/L 22.00/3.0 70.3 1785 27.6 700 31.5 800 29.0 736 67.0 - -
L5 DL 20 26 32 36 T/L 22.00/3.0 70.8 1798 27.3 694 32.1 815 28.6 727 97.0 - -
L5S STMS 26 32 36 T/L(T/T) 22.00/3.0 70.8 1798 26.8 680 32.6 827 28.3 719 95.0 - -
58

TRA Code Recommended Approximate Inflated Dimensions Minimum

Tire Size or Pattern Ply Rating Type Rim/ OD OW SLR SLW OTD Dual Spacing
Application Flange Height (inch) inch mm inch mm inch mm inch mm mm inch mm
29.5-25 L3 E3 VL2 22 28 T/L 25.00/3.5 72.8 1850 30.3 770 31.2 792 32.8 833 49.0 - -
L4 RLS 28 T/L 25.00/3.5 75.3 1912 30.9 784 32.0 813 31.7 805 74.0 - -
L5 DL 22 28 T/L 25.00/3.5 75.0 1904 30.2 768 34.4 873 31.7 805 105.5 - -
23.1-26 C2 AL2 8 T/T(T/L) DW20 58.7 1490 23.4 595 25.7 654 24.3 618 19.0 - -
LS TGS 10 T/T DW20A 64.3 1632 23.4 594 29.4 747 24.9 633 51.0 - -
16.9-28 L2 FG 8 10 T/T W15L 55.6 1412 15.9 404 24.6 625 17.3 439 31.5 - -
29.5-29 L3 E3 RL 28 34 T/L 25.00/3.5 77.8 1977 30.5 775 35.0 889 32.5 826 48.5 - -
L4 RLS 28 T/L 25.00/3.5 80.4 2041 30.5 774 34.7 881 32.8 833 62.0 - -
L4 RLS2 28 T/L
L5 DL 28 34 T/L 25.00/3.5 79.6 2023 30.3 770 35.5 901 30.9 785 107.0 - -
L5S STMS 28 34 T/L 25.00/3.5 79.6 2023 29.5 749 36.7 931 31.2 792 103.0 - -
16.9-30 L2 FG 10 T/T W15L 57.3 1455 15.4 390 25.2 640 17.3 439 30.0 - -
24.5-32 LS TGS 16 T/T DW21A 72.1 1831 24.3 618 32.8 833 24.8 631 54.0 - -
30.5L-32 LS TGS 16 T/T DW27A 72.7 1847 30.7 780 33.1 840 31.1 790 56.0 - -
18.00-33 E3 RL 32 T/L 13.00/2.5 71.7 1822 19.7 501 32.8 832 22.4 569 37.5 23.1 587
E4 RLS 32 36 T/L 13.00/2.5 73.9 1877 19.8 504 33.9 860 20.9 530 56.5 23.1 587
E4 ELS2 32 36 T/L 13.00/2.5 73.2 1860 20.0 509 34.9 887 21.0 533 66.5 23.1 587
Industrial Service ELS2 36 T/L 13.00/2.5 73.2 1860 20.0 509 34.9 887 21.0 533 66.5 23.1 587
35/65-33 L4 NL 24 30 42 T/L 28.00/3.5 81.9 2080 35.4 900 37.5 953 36.5 928 62.5 - -
L5 DL 24 30 42 T/L 28.00/3.5 82.1 2085 35.0 890 38.5 979 37.2 945 97.0 - -
L5 DL2 24 30 T/L 28.00/3.5 82.1 2085 35.0 890 38.5 979 37.2 945 97.0 - -
33.5-33 E3 RL 38 T/L 28.00/4.0 88.6 2251 33.5 852 38.9 988 36.4 925 49.0 - -
23.1-34 LS TGS 14 T/T DW20A 72.2 1835 23.6 600 33.3 846 24.8 631 52.5 - -
21.00-35 E3 RL 32 36 40 T/L 15.00/3.0 78.7 2000 22.1 561 35.9 911 23.6 600 41.0 27.6 701
E4 RLS 36 T/L 15.00/3.0 81.0 2057 22.6 574 37.4 950 24.0 610 59.5 27.6 701
E4 ELS2 36 40 T/L 15.00/3.0 80.7 2050 23.3 591 37.8 961 24.3 617 67.0 27.6 701
Industrial Service ELS2 40 T/L 15.00/3.0 80.3 2040 23.3 592 37.6 955 24.3 617 67.0 27.6 701
 TRA Code Recommended Approximate Inflated Dimensions Minimum
Tire Size or Pattern Ply Rating Type Rim/ OD OW SLR SLW OTD Dual Spacing
Application Flange Height (inch) inch mm inch mm inch mm inch mm mm inch mm
24.00-35 E4 RLS 36 42 T/L 17.00/3.5 86.6 2199 25.8 655 39.3 998 27.4 696 66.0 31.3 795
29.5-35 E3 RL 28 34 T/L 25.00/3.5 84.1 2135 28.8 731 38.0 965 34.5 876 40.5 - -
33.25-35 E3 RL 32 38 T/L 27.00/3.5 88.3 2242 33.3 845 38.7 983 36.7 931 49.0 - -
L5 DL 32 T/L 27.00/3.5 90.9 2310 34.1 866 42.2 1072 35.6 904 121.5 - -
37.25-35 E3 RL 30 36 T/L 31.00/4.0 91.7 2330 37.6 955 41.7 1060 39.4 1000 51.5 - -
L5 DL 36 T/L 31.00/4.0 96.3 2447 38.2 970 42.8 1088 39.0 991 136.0 - -
37.5-39 E3 RL 44 52 T/L 32.00/4.5 100.1 2542 37.8 959 45.2 1149 41.1 1044 56.0 - -
L5 DL 44 T/L 32.00/4.5 102.4 2600 38.7 984 45.4 1153 40.6 1030 135.0 - -
40/65-39 L5 DL 30 36 56 T/L 32.00/4.0 95.3 2420 40.2 1020 43.8 1112 42.1 1070 106.5 - -
41.25/70-39 L5 DL 34 42 T/L 32.00/4.5 98.8 2510 41.5 1054 45.1 1145 43.5 1104 115.5 - -
45/65-45 L4 NL 38 50 58 T/L 36.00/4.5 108.3 2750 45.6 1158 48.0 1219 49.2 1250 72.0 - -
L5 DL 38 46 50 58 T/L 36.00/4.5 107.8 2740 44.9 1140 49.6 1261 46.6 1185 116.0 - -
L5 DL2 38 46 T/L 36.00/4.5 107.8 2740 44.9 1140 49.6 1261 46.6 1185 116.0 - -
24.00-49 E3 RL 48 T/L 17.00/3.5 97.8 2483 26.1 663 45.4 1152 26.8 681 47.0 31.3 795
E4 RLS 42 48 T/L 17.00/3.5 98.4 2500 26.4 670 45.9 1167 30.1 764 63.5 31.3 795
27.00-49 E4 RLS 42 48 T/L 19.50/4.0 103.9 2640 30.4 770 48.1 1222 32.4 822 70.0 35.1 892
30.00-51 E4 RLS 46 52 58 T/L 22.00/4.5 113.4 2880 33.1 841 51.6 1311 39.0 991 82.5 39.1 993
50/65-51 L5 DL 62 T/L 40.00/4.5 121.1 3075 49.2 1250 55.6 1412 51.2 1300 127.5 - -
67.5/60-51 L5 DL 84 T/L 46.00/5.5 136.8 3475 65.0 1650 60.6 1538 67.3 1710 142.5 - -
65/65-57 L5 DL 62 T/L 52.00/6.0 147.0 3735 64.6 1640 65.8 1672 67.2 1706 142.5 - -
55.5/80-57 L5 DL 68 84 T/L 44.00/6.0 141.3 3590 55.1 1400 63.8 1620 56.8 1443 121.5 - -
BIAS TIRE TECHNICAL DATA 59
60

BIAS TIRE LOAD AND INFLATION PRESSURE TABLES

■Earthmover Service
50km/h (30mph) Maximum Speed Table: B1
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 275 300 325 350 375 400 425 450 475 500 525 550 575 600 625 650
psi 40 44 47 51 54 58 62 65 69 73 76 80 83 87 91 94
12.00-20 Kg 2180 2300 2430 2500 2650 2725 2800 2900(16) 3000 3075(18)
lbs 4800 5080 5360 5520 5840 6000 6150 6400(16) 6600 6800(18)
12.00-24 Kg 2500 2575 2725 2800 3000 3075 3150 3250(16) 3350 3450 3550 3650(20)
lbs 5520 5680 6000 6150 6600 6800 6950 7150(16) 7400 7600 7850 8050(20)
14.00-24 Kg 3350 3550 3750 3875 4000 4250 4375 4500 4625(20) 4750 4875 5000 5150(24) 5600(28)
lbs 7400 7850 8250 8550 8800 9350 9650 9900 10200(20) 10500 10700 11000 11400(24) 12300(28)
14.00-25 Kg 3350 3550 3750 3875 4000 4250 4375 4500 4625(20) 4750 4875 5000 5150(24)
lbs 7400 7850 8250 8550 8800 9350 9650 9900 10200(20) 10500 10700 11000 11400(24)
16.00-24 Kg 4875(16) 6000(24)
(16.00-24TG) lbs 10700(16) 13200(24)
16.00-25 Kg 4375 4625 4875 5000 5300 5450 5600 5800 6000(24) 6300 6500 6700(28) 7250(32)
lbs 9650 10200 10700 11000 11700 12000 12300 12800 13200(24) 13900 14300 14800(28) 16000(32)
18.00-25 Kg 5600(16) 6000 6300 6500 6900 7100 7300(24) 7500 7750 8000 8250 8500 8750(32)
lbs 12300(16) 13200 13900 14300 15200 15700 16100(24) 16500 17100 17600 18200 18700 19300(32)
18.00-33 Kg 6500 6900 7300 7500 8000 8250 8500 8750 9000 9250 9750 10000 10300(32) 10900(36)
lbs 14300 15200 16100 16500 17600 18200 18700 19300 19800 20400 21500 22000 22700(32) 24000(36)
21.00-25 Kg 7300 7750 8000 8500 8750(24) 9000 9500 9750 10000 10300(32)
lbs 16100 17100 17600 18700 19300(24) 19800 20900 21500 22000 22700(32)
21.00-35 Kg 8750 9000 9500 10000 10300 10900 11200 11500 11800 12150(32) 12500 12850(36) 13200 13600 14000(40)
lbs 19300 19800 20900 22000 22700 24000 24700 25400 26000 26800(32) 27600 28300(36) 29100 30000 30900(40)
24.00-35 Kg 11200 11800 12150 12850 13200 14000 14500 15000 15500(36) 16000 16500 17000(42)
lbs 24700 26000 26800 28300 29100 30900 32000 33100 34200(36) 35300 36400 37500(42)
24.00-49 Kg 13200 14000 14500 15500 16000 16500 17000 18000 18500 19000 19500 20000 20600(42) 21800(48)
lbs 29100 30900 32000 34200 35300 36480 37500 39700 40800 41900 43000 44100 45400(42) 48100(48)
27.00-49 Kg 16500 17000 18000 19000 19500 20600 21200 21800 22400 23000(42) 23600 24300 25000(48)
lbs 36400 37500 39700 41900 43000 45400 46700 41800 49400 50700(42) 52000 53600 55100(48)
30.00-51 Kg 20000 21200 22400 23000 24300 25000 25750 27250 28000 29000(46) 29000 30000(52) 32500(58)
lbs 44100 46700 49400 50700 53600 55100 56800 60000 61500 64000(46) 64000 66000(52) 72000(58)
Note: Figures in parentheses denote ply rating for which bold face loads and inflations are maximum.
 ■Earthmover Service
50km/h (30mph) Maximum Speed Table: B2
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation 175 200 225 250 275 300 325 350 375 400 475 525 600
25 29 33 36 40 44 47 51 54 58 69 76 87
20.5-25 kPa 4125 4500 4875 5150 5450(16) 5800 6000(20) 6300 6500 6700(24)
psi 9100 9900 10700 11400 12000(16) 12800 13200(20) 13900 14300 14800(24)
23.5-25 Kg 5300 5800 6150(16) 6500 6900 7300(20) 7750 8000(24)
lbs 11700 12800 13600(16) 14300 15200 16100(20) 17100 17600(24)
26.5-25 Kg 6700 7300 7750 8250(20) 8750 9250(24) 9500(26)
lbs 14800 16100 17100 18200(20) 19300 20400(24) 20900(26)
29.5-25 Kg 8000 8750 9250 10000(22) 10600 10900 11500(28)
lbs 17600 19300 20400 22000(22) 23400 24000 25400(28)
29.5-29 Kg 8500 9250 10000 10600 11200 11800 12150(28) 12850 13200 14000(34)
lbs 18700 20400 22000 23400 24700 26000 26800(28) 28300 29100 30900(34)
33.5-33 Kg 11500 12500 13200 14000 15000 16000 16500 17500 18000 18500(38)
lbs 25400 27600 29100 30900 33100 35300 36400 38600 39700 40800(38)
29.5-35 Kg 9250 10000 10900 11500 12150 12850 13600(28) 14000 14500 15000(34)
lbs 20400 22000 24000 25400 26800 28300 30000(28) 30900 32000 33100(34)
33.25-35 Kg 11200 12150 12850 14000 14500 15500 16000(32) 17000 17500 18000(38)
lbs 24700 26800 28300 30900 32000 34200 35300(32) 37500 38600 39700(38)
BIAS TIRE LOAD AND INFLATION PRESSURE TABLES 61

37.25-35 Kg 13600 14500 15500 16500 17500(30) 18500 19500(36)

lbs 30000 32000 34200 36400 38600(30) 40800 43000(36)
37.5-39 Kg 15000 16000 17000 18500 19500 20600 21200 22400 23000 24300(44) 26500(52)
lbs 33100 35300 37500 40800 43000 45400 46700 49400 50700 53600(44) 58400(52)
Note: Figures in parentheses denote ply rating for which bold face loads and inflations are maximum.
62

■Earthmover Service
50km/h (30mph) Maximum Speed Table: B3
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 200 220 240 260 280 300 325 350 375 400 425 450 475 500 525 550
psi 29 32 35 38 41 44 47 51 54 58 62 65 69 73 76 80
8.25-20 Kg 1075 1135 1195 1255 1310 1365 1430 1490 1555 1615 1670 1730 1785 1840 1890(12)
lbs 2370 2500 2630 2765 2890 3010 3150 3280 3430 3560 3680 3810 3940 4060 4170(12)
9.00-20 Kg 1280 1350 1420 1490 1555 1620 1695 1770 1845 1915 1985 2055 2120 2185 2245 2310(14)
lbs 2820 2980 3130 3280 3430 3570 3740 3900 4070 4220 4380 4530 4670 4820 4950 5090(14)
10.00-20 Kg 1445 1530 1610 1685 1760 1830 1920 2005 2085 2170 2245 2320 2395 2470(14)
lbs 3190 3370 3550 3710 3880 4030 4230 4420 4600 4780 4950 5110 5280 5450(14)
11.00-20 Kg 1570 1660 1750 1830 1910 1990 2085 2180 2270 2355 2440 2525 2605(14) 2685 2760 2840(16)
lbs 3460 3660 3860 4030 4210 4390 4600 4810 5000 5190 5380 5570 5740(14) 5920 6080 6260(16)
Note: Figures in parentheses denote ply rating for which bold face loads and inflations are maximum.

LOAD CAPACITIES FOR EARTHMOVER SERVICE (2)The Variation in Load Carrying Capacity with Speed.
Operating Speed (km/h) Variation in Load Capacity (%)
(1)Excess Loads
<15 *
Due to the specialized nature of Off-The-Road vehicle usage, loads in excess of those in the
appropriate above-listed load tables are often encountered. 15 +12%
These excess loads result from items such as actual vehicle weight exceeding the design 20 +10%
weight, varying density of materials, field modifications to the equipment, load transfer, etc. 25 +8%
Only under these conditions, the actual tire load in service may exceed the above load 30 +6%
ratings in the tables (B1, B2) for the tire by an amount not greater than shown in the 35 +4%
following table: 40 +3%
45 +2%
Maximum Excess Loads 50
(Reference Speed for 0
Load *Pressure Earthmover Service)
Bias Tires 15% 30% >50 *
*Consult a Bridgestone Representative.
*When excess loads are encountered, cold inflation pressures must be increased to
compensate for higher loads. For each 1% increase in load, the inflation pressure must be The variation in load carrying capacity with speed of earthmoving equipment
increased by 2%. tires is determined by applying the percentages shown above to the tire load
capacities specified for EARTHMOVER SERVICE (Table: B1, B2) at the
The inflation pressure should not exceed 825 kPa (120 psi). corresponding inflation pressure.
The above maximum excess loads will result in reduced tire performance and MUST
BE APPROVED BY BRIDGESTONE. The tires listed in Table B3 shall not be applied.

The tires listed in Table B3 shall not be applied.

 ■Grader Service
40km/h (25mph) Maximum Speed Table: B4
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 125 150 175 200 225 250 275 300 325 350
psi 18 22 25 29 33 36 40 44 47 51
13.00-24TG Kg 1700 1900 2060 2240 2360 2500 2650 2725(12) 2900 3075(16)
(13.00-24) lbs 3740 4180 4540 4940 5200 5520 5840 6000(12) 6400 6800(16)
14.00-24TG Kg 2060 2300 2500 2650 2800 3075(12) 3250 3450(14) 3550 3650(16)
lbs 4540 5080 5520 5840 6150 6800(12) 7150 7600(14) 7850 8050(16)
16.00-24TG Kg 2650 3000 3250 3450 3650(12) 4000 4250 4500(16)
lbs 5840 6600 7150 7600 8050(12) 8800 9350 9900(16)
18.00-25 Kg 3150 3550 3875 4125 4500 5000(16)
lbs 6950 7850 8550 9100 9900 11000(16)
＊17.5-25 Kg 2120 2360 2575 2900(12) 3000 3150 3350(16)
lbs 4680 5200 5680 6400(12) 6600 6950 7400(16)
＊20.5-25 Kg 2800 3150 3550(12) 3750 4000(16)
lbs 6150 6950 7850(12) 8250 8800(16)
＊23.5-25 Kg 3650 4000 4375 4750(16)
lbs 8050 8800 9650 10500(16)
＊
For slope and ditching service, inflation pressures should be increased by 100 kPa (15 psi) with no increase in load rating. For extreme conditions, consult a Bridgestone
Representative for additional recommended operating requirements.
BIAS TIRE LOAD AND INFLATION PRESSURE TABLES 63

Note: Figures in parentheses denote ply rating for which bold face loads and inflations are maximum.

■Grader Service
40km/h (25mph) Maximum Speed Table: B5
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 140
140 160 180 200 220 240 260 280 300 325 350 375 425 450 500
psi 2020 23 26 29 32 35 38 41 44 47 51 54 62 65 73
9.00-20 Kg 955 1035 1110 1180 1245 1310 1375 1435 1495 1565 1635(10) 1850(12) 2025(14)
lbs 2110 2280 2450 2600 2740 2890 3040 3160 3300 3460 3600(10) 4060(12) 4480(14)
10.00-20 Kg 1080 1170 1255 1335 1410 1485 1555 1625 1690 1770(10) 1850 1925(12) 2150(14) 2300(16)
lbs 2380 2580 2770 2940 3100 3280 3420 3580 3720 3900(10) 4080 4240(12) 4760(14) 5060(16)
11.00-20 Kg 1175 1275 1365 1450 1535 1615 1690 1765 1840 1925(10) 2010 2095(12) 2500(16)
lbs 2590 2810 3000 3200 3380 3560 3720 3900 4060 4240(10) 4440 4620(12) 5500(16)
Note: Figures in parentheses denote ply rating for which bold face loads and inflations are maximum.
64

■Loader & Dozer Service

10km/h (5mph) Maximum Speed
Distance Up to 76m (250ft) Table: B6
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designa- kPa 120 140 160 180 200 220 240 260 280 300 325 350 375 400 425 450 475 500 525 550
tion psi 17 20 23 26 29 32 35 38 41 44 47 51 54 58 62 65 69 73 76 80
5.70-12 Kg 420 445 470 495 520 545 565 590 620(4)
lbs 925 980 1035 1090 1145 1200 1245 1300 1365(4)
23x8.50-12 Kg 550 585 620 655 685(4)
lbs 1210 1290 1365 1445 1510(4)
5.50-15 Kg 595 630 665 700 735 765 800 835 875 910 945 980 1015 1045 1075 1110 1140(6)
lbs 1310 1390 1465 1545 1620 1685 1765 1840 1930 2005 2085 2160 2235 2305 2370 2445 2515(6)
7.50-15 Kg 1030 1095 1155 1215 1275(4)
lbs 2270 2415 2545 2680 2810(4)
27x8.50-15 Kg 695 740 780 820 860(4)
lbs 1530 1630 1720 1805 1895(4)
10-15 Kg 1200 1275 1350 1420 1490 1555 1620(6) 1695 1770 1845 1915 1985 2050 2120 2185(10)
lbs 2645 2810 2975 3130 3285 3430 3570(6) 3735 3900 4065 4220 4375 4520 4675 4815(10)
12/65-15 Kg 1530 1645 1760 1875 1985 2095(10)
lbs 3375 3625 3880 4135 4375 4620(10)
33x12.5-15 Kg 1510 1605 1695 1785(6) 2130(8)
lbs 3330 3540 3735 3935(6) 4695(8)
14.0/65-15 Kg 1175 1285 1390 1485 1580 1675 1760(8)
lbs 2590 2830 3065 3275 3485 3690 3880(8)
12.5/70-16 Kg 1050 1145 1240 1330 1410(6) 1495 1570 1645(8)
lbs 2315 2525 2735 2930 3110(6) 3295 3460 3625(8)
10-16.5 Kg 1140 1215 1285(4) 1350 1415 1475 1540 1610(6) 1685 1750 1820(8)
lbs 2515 2680 2830(4) 2975 3120 3250 3395 3550(6) 3715 3860 4010(8)
12-16.5 Kg 1470 1565 1655 1740 1820(6) 1905 1980 2075 2170(8)
lbs 3240 3450 3650 3835 4010(6) 4200 4365 4575 4785(8)
10-18 Kg 1450 1540 1630 1715 1795 1875 1955 2045 2140 2225 2310 2395 2475 2555 2635(10)
lbs 3195 3395 3595 3780 3955 4135 4310 4510 4715 4905 5090 5280 5455 5630 5810(10)
12.5/65-18 Kg 1065 1165 1260 1350 1435 1515 1595 1670(8)
lbs 2345 2570 2775 2975 3165 3340 3515 3680(8)
15.5/60-18 Kg 1525 1670 1805 1935 2060 2195(8)
lbs 3360 3680 3980 4265 4540 4840(8)
15.5/70-18 Kg 1725 1885 2040 2185 2325 2455(8)
lbs 3800 4155 4495 4815 5125 5410(8)
13.5-20 TG Kg 2300 2445 2585 2720 2850 2980 3100 3250 3395(10)
lbs 5070 2390 5700 2995 6285 6570 6835 7165 7485(10)
15.5/70-20 Kg 1835 2010 2175 2330 2475 2620 2755 2890(10)
lbs 4045 4430 4795 5135 5455 5775 6075 6370(10)
42x17-20 Kg 2740(6) 2915 3080 3240 3395 3545 3690(10)
lbs 6040(6) 6425 6790 7140 7485 7815 8135(10)
17.5/65-20 Kg 2130 2330 2520 2700 2875 3040 3195(10)
lbs 4695 5135 5555 5950 6340 6700 7045(10)
Continue to next page.
 Continued page.
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designa- kPa 120 140 160 180 200 220 240 260 280 300 325 350 375 400 425 450 475 500 525 550
tion psi 17 20 23 26 29 32 35 38 41 44 47 51 54 58 62 65 69 73 76 80
16.9-24 Kg 2300 2520 2725 2920 3105 3280 3455(10)
lbs 5070 5555 6005 6435 6845 7230 7615(10)
18.4-24 Kg 2765 3025 3270 3505 3725 3940(10)
lbs 6095 6670 7210 7725 8210 8685(10)
19.5-24 Kg 3150(16)
lbs 6950(16)
22/70-24 Kg 6500(12)
(20-24) lbs 14300(12)
16.9-28 Kg 2455 2690 2905 3115 3310(8) 3685(10)
lbs 5410 5930 6405 6865 7295(8) 8125(10)
16.9-30 Kg 2535 2775 3000 3215 3420 3615 3805(10)
lbs 5590 6115 6615 7085 7540 7970 8390(10)
Note: Figures in parentheses denote ply rating for which bold face loads and inflations are maximum.

■Loader & Dozer Service 10km/h (5mph) Maximum Speed

Distance Up to 76m (250ft) Table: B7
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designa- kPa 300 375 425 450 475 500 525 550 575 600 625 650 675 689 700 725 750 825 850
tion psi 44 54 62 65 69 73 76 80 83 87 91 94 98 100 102 105 109 120 124
BIAS TIRE LOAD AND INFLATION PRESSURE TABLES 65

9.00-10 Kg 1700 1755 1805 1855 1905 1950 2000 2045 2090 2115(12)
lbs 3748 3869 3979 4090 4200 4299 4409 4508 4608 4665(12)
9.00-20 Kg 3150 3250 3350 3450 3450 3550(12) 3875(14)
lbs 6950 7150 7400 7600 7600 7850(12) 8550(14)
10.00-20 Kg 3550(10) 3650 3750 3875(12) 4000 4125 4250(14) 4345 4395 4440 4530 4620(16)
lbs 7850(10) 8050 8250 8550(12) 8800 9100 9350(14) 9580 9690 9790 9990 10180(16)
11.00-20 Kg 3750(10) 3875 4000 4125(12) 4250 4375 4500 4880(16)
lbs 8300(10) 8550 8800 9100(12) 9350 9650 9900 10740(16)
12.00-20 Kg 4375 4500 4625 4750 4875 5000 5150 5300 5450 6020(20)
lbs 9650 9900 10200 10500 10700 11000 11400 11700 12000 13250(20)
12.00-24 Kg 5000 5150 5300 5450 5600 5600 5800 6000 6150(16) 6270 6410 6540 6900(20)
lbs 11000 11400 11700 12000 12300 12300 12800 13200 13600(16) 13790 14100 14390 15200(20)
13.00-24 Kg 4375 5000 5600(12) 5800 5975 6150 6180 6340 6500(16)
(13.00-24TG) lbs 9625 11000 12320(12) 12760 13145 13530 13600 13950 14300(16)
14.00-24 Kg 6300(12) 6700 6900 7100 7300(16) 7500 7750 8000 8250 8500(20) 9550(24)
(14.00-24TG) lbs 13900(12) 14800 15200 15700 16100(16) 16500 17100 17600 18200 18700(20) 21000(24)
16.00-25 Kg 8750 9000 9250 9750 10000 10300 10600(24)
lbs 19300 19800 20400 21500 22000 22700 23400(24)
18.00-25 Kg 8750(12) 10000(16) 11500 11800 12150 12500(24) 12850 13200 13600 13600(28) 14000 14500 15000(32)
lbs 19300(12) 22000(16) 24500 26000 26800 27600(24) 28300 29100 30000 30000(28) 30900 32000 33100(32)
21.00-25 Kg 14500 15000 15500 16000 16500 17000 17000 17500(32)
lbs 32000 33100 34200 35300 36480 37500 37500 38600(32)
Note: Figures in parentheses denote ply rating for which bold face loads and inflations are maximum.
66

■Loader & Dozer Service 10km/h (5mph) Maximum Speed

Distance Up to 76m (250ft) Table: B8
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 325 350 375 400 425 450 475 500 525 550 600
psi 47 51 54 58 62 65 69 73 76 80 87
13.00-24TG Kg 4500 4750 5000 5150 5300 5600(12) 6500(16)
lbs 9900 10500 11000 11400 11700 12300(12) 14300(16)
14.00-24TG Kg 5450 5600 6000 6150 6300(12) 6500 6700 6900 7100 7300(16)
lbs 12000 12300 13200 13600 13900(12) 14300 14800 15200 15700 16100(16)
16.00-24TG Kg 7100(12) 7300 7750 8000 8250(16)
lbs 15700(12) 16100 17100 17600 18200(16)
Note: Figures in parentheses denote ply rating for which bold face loads and inflations are maximum.

■Loader & Dozer Service 10km/h (5mph) Maximum Speed

Distance Up to 76m (250ft) Table: B9
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 225 250 275 300 325 350 375 400 425 450 475 500 525 550 575 600
psi 33 36 40 44 47 51 54 58 62 65 69 73 76 80 83 87
15.5-25 Kg 4000 4250 4500 4750 4875 5150 5300 5600(12)
lbs 8800 9350 9900 10500 10700 11400 11700 12300(12)
17.5-25 Kg 4570 5000 5300 5600 5800 6150(12) 6300 6700 6900 7100 7300(16) 7500 7750 8000 8250(20)
lbs 10500 11000 11700 12300 12800 13600(12) 13900 14800 15200 15700 16100(16) 16500 17100 17600 18200(20)
*20.5-25 Kg 6300 6700(12) 7100 7500 7750 8250(16) 8500 8750 9250 9500(20) 9750 10000 10300(24)
lbs 13900 14800(12) 15700 16500 17100 18200(16) 18700 19300 20400 20900(20) 21500 22000 22700(24)
23.5-25 Kg 8000(12) 8500 9000 9500(16) 10000 10600 10900(20) 11200 11800 12150 12500(24)
lbs 17600(12) 18700 19800 20900(16) 22000 23400 24000(20) 24700 26000 26800 26700(24)
**26.5-25 Kg 10000 10900 11500(16) 12150 12500 13200(20) 13600 14000(24) 14500 15000(26) 15500(28) 16000 16500 17000(32)
lbs 22000 24000 25400(16) 26800 27600 29100(20) 30000 30900(24) 32000 33100(26) 34200(28) 35300 36480 37500(32)
29.5-25 Kg 12150 12850 13600 14500 15000(22) 16000 16500 17000 17500(28)
lbs 26800 28300 30000 32000 33100(22) 35300 36480 37500 38600(28)
29.5-29 Kg 12850 14000 14500 15500 16000 17000 17500 18000 19000(28) 19500 20000 20600 21200(34)
lbs 28300 30900 32000 34200 35300 37500 38600 39700 41900(28) 43000 44100 45400 46700(34)
33.25-35 Kg 17000 18000 19000 20000 21200 22400 23000 24300 25000 25750(32)
lbs 37500 39700 41900 44100 46700 49400 50700 53600 55100 56800(32)
37.25-35 Kg 20600 21800 23000 24300 25750 26500 28000 29000 30000 30750(36)
lbs 45400 48100 50700 53600 56800 58400 61500 64000 66000 68000(36)
37.5-39 Kg 22400 24300 25000 26500 28000 29000 30750 31500 32500 33500 34500 35500 37500(44)
lbs 49400 53600 55100 58400 61500 64000 68000 69500 71500 74000 76000 78500 82500(44)
* 28 Ply Rating / 11500 kg @ 625 kPa (25400Ibs. @ 91psi )
**36 Ply Rating / 18600 kg @ 630 kPa (41000 Ibs. @ 92psi )
Note: Figures in parentheses denote ply rating for which bold face loads and inflations are maximum.
 ■Loader & Dozer Service
10km/h (5mph) Maximum Speed
Distance Up to 76m (250ft) Table: B10
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 275 300 325 350 375 400 425 450 475 500 525 550 575 600 625 650 675 700
psi 40 44 47 51 54 58 62 65 69 73 76 80 83 87 91 94 98 102
35/65-33 Kg 16500 17000 18000 19000(24) 19500 20000 21200 21800(30) 22400 23000 23600 24300 25000 25750 26250(42)
lbs 36480 37500 39700 41900(24) 43000 44100 46700 48100(30) 49400 50700 52000 53600 55100 56800 57900(42)
40/65-39 Kg 22400 23600 25000 25750 27250(30) 28000 29000 30000 30750(36) 31500 32500 33500 34500 35500 36250 37000 38000 38750(56)
lbs 49400 52000 55100 56800 60000(30) 61500 64000 66000 68000(36) 69500 71500 74000 76000 78000 80000 82000 83500 85500(56)
41.25/70-39 Kg 27250 29000 30000 31500 32500(34) 33500 35500 36500 37500(42)
lbs 60000 64000 66000 69500 71500(34) 74000 78500 80500 82500(42)
45/65-45 Kg 30000 31500 32500 34500 35500 37500 38750(38) 40000 41250 42500 43750(46) 45000 46250(50) 47250 48250 49250 50000(58)
lbs 66000 69500 71500 76000 78500 82500 85500(38) 88000 91000 93500 96500(46) 99000 102000(50) 104200 106400 108600 110000(58)
50/65-51 Kg 37500 40000 42500 43750 46250 47500 48750 51500 53000 54500 56000 58000 58000 60000 61500 63000(62)
lbs 82500 88000 93500 96500 102000 104500 107500 113500 117000 120000 123500 128000 128000 132500 135500 139000(62)
65/65-57 Kg 67000 71000 73000 77500 80000 82500 87500 90000 92500 95000(62) 97800 100400 103100 105700 108200 110800 113200 115700
lbs 147500 156500 161000 171000 176500 182000 193000 198500 204000 209500(62) 215600 221300 227300 233000 238500 244300 249600 255100
Notes: 1) Figures in parentheses denote ply rating for which bold face loads and inflations are maximum.
2) When the inflation pressure of 65/65-57 exceeds 500 kPa (73 psi), consult a Bridgestone Representative.
BIAS TIRE LOAD AND INFLATION PRESSURE TABLES 67

■Loader & Dozer Service

10km/h (5mph) Maximum Speed
Distance Up to 76m (250ft) Table: B11
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 310 340 380 410 450 480 510 550 580 620 690 720
psi 45 50 55 60 65 70 75 80 85 90 100 105
67.5/60-51 Kg 67250 71000 75750 79250 83500 86750 90000 94000 97000 100750 107300(84)
lbs 148000 156000 166500 174500 183500 191000 198000 207000 213500 221500 236500(84)
55.5/80-57 Kg 66000 69750 74500 77750 82000 85250 88250 92250 95250(68) 99000 105500 107730(84)
lbs 145000 156000 164000 171000 180500 187500 194000 203000 210000(68) 218000 232000 237500(84)
68

LOAD CAPACITIES FOR LOADER & DOZER SERVICE

(1)Excess Load (2)The Variation in Load Carrying Capacity with Speed.
Due to the specialized nature of Off-The-Road vehicle usage, loads in excess of those
in the appropriate above-listed load tables are often encountered. Max Speed % Load Change
These excess loads result from items such as actual vehicle weight exceeding the Static +60%
design weight, varying density of materials, field modifications to the equipment, load Creep +30%
transfer, etc. 4km/h (2-1/2mph) +15%
Only under these conditions, the actual tire load in service may exceed the above load 10km/h (5mph) No Change
ratings in the tables (B7, B8, B9, B10) for the tire by an amount not greater than
shown in the following table: *Table: B7, B8, B9, B10
The tires listed in Tables B6, B11, shall not be applied.
Maximum Excess Loads
Over 10km/h (5mph): Consult a Bridgestone Representative.
Load *Pressure
Bias Tires 15% 30% (3)For L5/L5S, On front tires for front end loaders, it is permissible to increase
inflation pressure up to 100kPa (15psi) above that shown in the tables; B9, B10,
*When excess loads are encountered, cold inflation pressures must be increased to and B11, with no increase in load.
compensate for higher loads. For each 1% increase in load, the inflation pressure (Maximum inflation pressure should not exceed 825 kPa (120 psi).)
must be increased by 2%.
The inflation pressure should not exceed 825 kPa (120 psi). The tires listed in Tables; B6, B7, B8, shall not be applied.
The above maximum excess loads will result in reduced tire performance
and MUST BE APPROVED BY BRIDGESTONE.
The tires listed in Table B6, B11 shall not be applied,
 ■Compactor Service
10km/h (5mph) Maximum Speed Table: B12
Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 110 240 260 280 300 325 350 375 400 425 450 475 500 525 550 575
psi 16 35 38 41 44 47 51 54 58 62 65 69 73 76 80 83
95/65-15 Kg 1100 1155 1205 1255 1315(6)
lbs 2430 2550 2560 2770 2900(6)
7.50-16 Kg 1405 1470 1535 1600 1675 1750 1820 1890(6)
lbs 3100 3240 3380 3530 3690 3860 4010 4170(6)
8.25-20 Kg 1935 2025 2115 2200 2310 2410 2510 2605 2700 2790 2880 2970 3055 3140 3225(10)
lbs 4270 4460 4660 4850 5090 5310 5330 5740 5950 6150 6350 6550 6750 6900 7100(10)
23.1-26 Kg 2850(8)
lbs 6285(8)
10.5/80-16 Kg 1645 1725 1800 1875(6)
lbs 3630 3800 3970 4130(6)
12.00-16 Kg 2830 2965 3095 3220 3375 3525 3670 3815 3950 4085(10)
lbs 6250 6550 6800 7100 7450 7750 8100 8400 8700 9000(10)
14/70-20 Kg 2775 2905 3035 3160 3310 3460 3600 3740 3875 4005(12)
lbs 6100 6400 6700 6950 7300 7650 7950 8250 8550 8850(12)
Note: Figures in parentheses denote ply rating for which bold face loads and inflations are maximum.
BIAS TIRE LOAD AND INFLATION PRESSURE TABLES 69

10km/h (5mph) Maximum Speed Table: B13

Tire Size Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation kPa 510 550 580 620 650 685 720 755 790 825 860 895 930 965 1000
psi 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145
7.50-15 Kg 2120 2205 2285 2360 2440 2510 2585 2660(12)
lbs 4680 4860 5040 5200 5380 5540 5700 5860(12)
9.00-20 Kg 3650(10)
lbs 8050(10)
11.00-20 Kg 4490 4670(12)
lbs 9900 10300(12)
12.00-20 Kg 5125 5305 5490(14)
lbs 11300 11700 12100(14)
13.00-24 Kg 6665 6895 7165 7395 7665 7890 8120 8345 8525 8755 8980 9160 9390 9570 9795(26)
lbs 14700 15200 15800 16300 16900 17400 17900 18400 18800 19300 19800 20200 20700 21100 21600(26)
Notes: 1) Figures in parentheses denote ply rating for which bold face loads and inflations are maximum.
2) Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116 psi).
70

■Logging Service
32km/h (20mph) Maximum Speed 10km/h Maximum Speed
Table: B14 Table: B16
Tire Size Tire Load Limits at Various Cold Inflation Pressures Tire Size Tire Load Limits
Designation kPa 140 170 210 Designation kPa 375
psi 20 25 30 psi 54
23.1-26 Kg 3245(10) 22/65-25 Kg 7225(16)
lbs 7160(10) lbs 15930(16)
24.5-32 Kg 3945 4495 5005(16)
lbs 8700 9910 11030(16)
30.5L-32 Kg 4710 5370(16)
20km/h Maximum Speed
lbs 10390 11840(16) Table: B17
23.1-34 Kg 3675 4660(14) Tire Size Tire Load Limits
lbs 8100 10270(14) Designation kPa 325
psi 47
22/65-25 Kg 5680(16)
16km/h (10mph) Maximum Speed lbs 12525(16)
Table: B15
Tire Size Tire Load Limits at Various Cold Inflation Pressures
Designation kPa 105 140 170 210 245 270
psi 15 20 25 30 30 40
23.1-26 Kg 2995 3540 4030(10)
lbs 6600 7810 8890(10)
24.5-32 Kg 3635 4305 4905 5455 6455(16)
lbs 8020 9490 10810 12030 14230(16)
30.5L-32 Kg 4345 5140 5855 6520 7130(16)
lbs 9580 11330 12910 14370 15720(16)
23.1-34 Kg 3390 4005 4565 5560(14)
lbs 7470 8830 10070 12260(14)

Notes: 1) Figures in parentheses denote ply rating for which bold

face loads and inflations are maximum.
2) Inflation Pressure 100kPa=1bar
 ■Sand Service Table: B18
Tire Size Maximum Tire Load Limits at Various Cold Inflation Pressures (100kPa=1bar)
Designation Speed bar 0.7 1.0 1.4 1.7 2.1 2.4
psi 10 15 20 25 30 35
9.00-15 10km/h Kg 785 995 1175 1340 1485 1630
5mph lbs 1730 2190 2590 2950 3280 3600
50km/h Kg 535 680 800 915 1020 1115
30mph lbs 1180 1500 1770 2020 2250 2460
65km/h Kg 455 575 680 775 860 945
40mph lbs 1000 1270 1500 1710 1900 2080
14.00-20 10km/h Kg 1960 2485 2950 3355 3720 4080
5mph lbs 4320 5480 6500 7400 8200 9000
50km/h Kg 1340 1695 2015 2285 2550 2790
30mph lbs 2950 3740 4440 5040 5620 6150
65km/h Kg 1135 1435 1695 1940 2160 2360
40mph lbs 2500 3160 3740 4280 4760 5200
16.00-20 10km/h Kg 2605 3310 3900 4450 4950 5450
5mph lbs 5740 7300 8600 9800 10900 12000
50km/h Kg 1780 2260 2680 3040 3380 3720
30mph lbs 3920 4980 5900 6700 7450 8200
65km/h Kg 1505 1915 2260 2580 2860 3130
40mph lbs 3320 4220 4980 5680 6300 6900
BIAS TIRE LOAD AND INFLATION PRESSURE TABLES 71

When tires are to be used under conditions other than those recommended above, consult a Bridgestone Representative.
72

■Industrial Service Table: B19

Inflation Pressures Tire Load Limits at Various Speeds (100kPa=1bar)
Tire Size Ply kPa 0 km/h 1 km/h 5 km/h 10 km/h 15 km/h 20 km/h 25 km/h 30 km/h
Designation Rating psi Static Creep 3 mph 5 mph 10 mph 12 mph 15 mph 18 mph
10.00-20 16 900 Kg 8640 7680 6960 6480 6240 6095 6000 5950
131 lbs 19051 16934 15347 14288 13759 13442 13230 13124
11.00-20 16 900 Kg 9360 8320 7540 7020 6760 6605 6500 6450
131 lbs 20639 18346 16626 15479 14906 14562 14333 14218
12.00-20 20 1000 Kg 11880 10560 9570 8910 8580 8380 8250 8185
145 lbs 26195 23285 21102 19647 18919 18482 18191 18046
12.00-24 20 1000 Kg 12420 11040 10005 9315 8970 8765 8625 8555
145 lbs 27386 24343 22061 20540 19779 19322 19018 18866
14.00-24 24 1000 Kg 17100 15200 13775 12825 12350 12065 11875 11780
[14.00-24TG] 145 lbs 37706 33516 30374 28279 27232 26603 26184 25975
28 1000 Kg 18000 16000 14500 13500 13000 12700 12500 12400
145 lbs 39690 35280 31973 29768 28665 28004 27563 27342
16.00-25 28 900 Kg 20700 18400 16675 15525 14950 14605 14375 14260
131 lbs 45644 40572 36768 34233 32965 32204 31697 31443
32 1000 Kg 22500 20000 18125 16875 16250 15875 15625 15500
145 lbs 49613 44100 39966 37209 35831 35004 34453 34178
18.00-25 36 1000 Kg 28800 25600 23200 21600 20800 20320 20000 19840
145 lbs 63504 56448 51156 47628 45864 44806 44100 43747
40 1000 Kg 30600 27200 24650 22950 22100 21590 21250 21080
145 lbs 67473 59976 54353 50605 48731 47606 46856 46481
 ■Industrial Service Table: B20
Inflation Pressures Tire Load Limits at Various Speeds (100kPa=1bar)
Tire Size Ply kPa 0 km/h 1 km/h 5 km/h 10 km/h 15 km/h 20 km/h 25 km/h 30 km/h
Designation Rating psi Static Creep 3 mph 5 mph 10 mph 12 mph 15 mph 18 mph
21.00-25 32 780 Kg 31500 28000 25375 23625 22750 22225 21875 21525
113 lbs 69457 61740 55951 52092 50163 49006 48234 47462
36 900 Kg 34265 30460 27605 25700 24750 24180 23800 23605
131 lbs 75559 67162 60867 56669 54569 53310 52470 52051
40 1000 Kg 36385 32345 29310 27290 26280 25670 25270 25065
145 lbs 80231 71316 64631 60174 57945 56607 55716 55271
23.5-25 36 830 Kg 28020 24905 22570 21015 20235 19770 19455 19300
120 lbs 61777 54913 49767 46334 44618 43588 42900 42559
18.00-33 36 1000 Kg 33300 29600 26825 24975 24050 23495 23125 22940
145 lbs 73427 65268 59149 55070 53030 51806 50991 50583
21.00-35 40 1000 Kg 43735 38875 35230 32800 31585 30855 30370 30130
145 lbs 96431 85717 77682 72324 69645 68037 66966 66430

Off-the-Road Tires Used for Industrial Vehicle Applications

1) Industrial Vehicles comprise vehicles such as counter-balanced lift trucks, container handlers, straddle carriers, aircraft tow
tractors, mobile crushers, log stackers etc., used on hard improved surfaces, smooth floors and runways.
2) Use Specifications of Industrial Service only.
3) To obtain the maximum permissible loads on lift truck Steering Wheels, multiply the above loads by 0.8.
BIAS TIRE LOAD AND INFLATION PRESSURE TABLES 73

4) Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116 psi).
5) For Speeds exceeding 30 km/h (18 mph), consult a Bridgestone Representative.
6) For tire sizes and ply ratings other than listed above, consult a Bridgestone Representative.
7) For RTG (RUBBER TIRED GANTRY CRANE) operation, consult a Bridgestone Representative.
74

TON-KM-PER-HOUR (TKPH), TON-MILE-PER-HOUR (TMPH)

■TKPH (Ton-Km-Per-Hour) Rating Table at 38˚C Ambient Temperature—Bias Tires
Tires for Earthmover Service (Maximum Speed of 50km/h or less)
TRA Classification E3 E4 E4
Pattern RL RLS ELS2
Bridgestone
Code No. 2A 1A 3A 2A 1A 3A 2A 1A
10.00-20 42
11.00-20 49
12.00-20 52
12.00-24 66
14.00-24/25 109
16.00-24/25 139 111
TIRE SIZE

18.00-25 173 153 153

(LS 139)
21.00-25 212 356
18.00-33 190 212 161 182 161 182
21.00-35 270 204 226 204
24.00-35 234 277
24.00-49 431 292 343
27.00-49 336 406
30.00-51 409 494 679

Wide Base Tires for Earthmover Service (Maximum Speed of 50km/h or less)
TRA Classification E3
Pattern RL/VL2
Bridgestone
Code No. 2A 1A 3A
20.5-25 80
23.5-25 107
26.5-25 132
29.5-25 150
TIRE SIZE

29.5-29 204
33.5-33 285
29.5-35 255 383
33.25-35 292
37.25-35 358 467
37.5-39 325 372 489
 ■TMPH (Ton-Mile-Per-Hour) Rating Table at 100˚F Ambient Temperature—Bias Tires
Tires for Earthmover Service (Maximum Speed of 30 Miles per Hour or less)
TRA Classification E3 E4 E4
Pattern RL RLS ELS2
Bridgestone
Code No. 2A 1A 3A 2A 1A 3A 2A 1A
10.00-20 29
11.00-20 34
12.00-20 36
12.00-24 45
14.00-24/25 75
16.00-24/25 95 76
TIRE SIZE

18.00-25 118 105 105

(LS 95)
21.00-25 145 244
18.00-33 130 145 110 125 110 125
21.00-35 185 140 155 140
24.00-35 160 190
TON-KM-PER-HOUR (TKPH), TON-MILE-PER-HOUR (TMPH) 75

24.00-49 295 200 235

27.00-49 230 278
30.00-51 280 338 465
Wide Base Tires for Earthmover Service (Maximum Speed of 30 Miles per Hour or less)
TRA Classification E3
Pattern RL/VL2
Bridgestone
Code No. 2A 1A 3A
20.5-25 55
23.5-25 73
26.5-25 90
29.5-25 103
TIRE SIZE

29.5-29 140
33.5-33 195
29.5-35 175 262
33.25-35 200
37.25-35 245 320
37.5-39 223 255 335
76

LOAD-AND-CARRY OPERATIONS FOR FRONT END LOADER

SERVICE
Service conditions of a loader is defined as “picking up material and relocating a short distance
away, a maximum of 76m (250 feet), one way, with a maximum speed of 10km/h (5mph)”. However,
a loader can pick up a load and transport such load to another location and return unloaded for a
longer distance. This type of service is called Load-and-Carry operations. Transportation usually
occurs at low speeds, up to 25km/h (15 mph), and distances are limited.
The tires when used in Load-and-Carry operations may encounter heat problems especially on the
front axle tires. To avoid such problems, Bridgestone recommends the following operating
conditions.
For tires over 33" inch rim diameter tires, careful study is required to maximize tire life while
considering Ton-Kilometer-Per-Hour (Ton-Mile-Per-Hour) limits. Please consult Bridgestone
representative for more information.
If you need to use the tire beyond this recommendation, please consult Bridgestone representative.

For Bias Tires

Load Capacity**
10km/h (5mph) Maximum Cycle Allowable Average
Tread Inflation Pressure
Class for Front Tires Distance Work-shift Speed
Rim Diameter
(m) (km/h)
29" and below 33" and above
L2, L3 Standard inflation 85% of 1200 10
L4 pressure 90% of STD. load 500
L5 + STD. load 3
100kpa (15psi) *** 300
L5S
** STD.load: Maximum permissible load at standard inflation pressure for respective tire size and star rating.
Please refer to the load - inflation pressure table for loader and dozer service “10km/h (5mph) service”.
***Not permissible
The inflation pressure should not exceed 825kPa (120psi).
OTHER SPECIFICATIONS
Flap Specifications O-Ring Specifications
πDB G1 P Applicable Diameter
Inner
Size Code No. Size Circumference
mm inch mm inch mm inch
(BIAS & RADIAL) mm inch mm inch
9.00-10 800 31.5 4.0 0.16 155 6.1
23 X 8.50/26 X 9-12 947 37.3 6.0 0.24 194 7.6 P-24A 13.00-24 6.6 0.26 1776 69.92
9.00-13 1024 40.3 6.0 0.24 150 5.9 14.00-24
5.50-15 1182 46.5 4.0 0.16 127 5.0 16.00-24
33 X 12.5-15 1203 47.4 7.0 0.27 275 10.8 16.9-24
10-15 1205 47.4 7.0 0.27 280 11.0 18.4-24
9.00-15 1178 46.4 4.0 0.16 160 6.3 22/70-24
10-18 1446 56.9 8.0 0.32 300 11.8 P-25A 13.00-25 6.6 0.26 1875 73.82
13.00/14.00-20 1628 64.1 8.0 0.32 246 9.7 14.00-25(★1)
13.5-20 1576 62.1 9.0 0.35 305 12.0 15.5-25
42 X 17-20 1576 62.1 9.0 0.35 390 15.4 P-25B 14.00-25(★2) 9.8 0.39 1821 71.69
16.00-20, 21 1600 63.0 9.0 0.35 293 11.5 16.00-25
19.5-24 1916 75.4 12.0 0.47 459 18.1 18.00-25
13.00/14.00-24, 25 1942 76.5 9.0 0.35 232 9.1 21.00-25
12.00A14.00-24, 25 1942 76.5 9.0 0.35 232 9.1 24.00-25
16.00-24, 25 1916 75.4 9.0 0.35 293 11.5 17.5-25
15.5A/18.00-24, 25 1926 75.8 6.0 0.24 340 13.4
20.5-25
18.00-25XXXT 1916 75.4 9.0 0.35 293 11.5
23.5-25
21.00-24, 25 1919 75.6 12.0 0.47 395 15.6
26.5-25
17.5-25 1916 75.4 12.0 0.47 359 14.1
29.5-25
20.5-25 1916 75.4 12.0 0.47 462 18.2
22/65-25
23.5-25 1934 76.1 9.0 0.35 560 22.1
20.5/24.00-25 1916 75.4 12.0 0.47 459 18.1 30/65-25
26.5-25 2010 79.1 12.0 0.47 570 22.4 P-29B 17.5-29 9.8 0.39 2125 83.66
29.5/69 X 35-25 1928 75.9 12.0 0.47 700 27.6 29.5-29
29.5-29 2244 88.4 12.0 0.47 700 27.6 33.25-29
18.00-33 2553 100.5 9.0 0.35 310 12.2 P-33B 18.00-33 9.8 0.39 2435 95.86
27.00-33 2568 101.1 12.0 0.47 547 21.5 33.5-33
16.00R20 1600 63.0 9.0 0.35 293 11.5 35/65-33
11.00A13.00R24 1934 76.1 8.5 0.33 220 8.7 P-35B 21.00-35 9.8 0.39 2572 101.26
14.00/16.00R24, 25 1942 76.5 9.0 0.35 260 10.2 24.00-35
21.00R-25 1924 75.8 7.5 0.30 404 15.9 29.5-35
21.00R-33 2556 100.7 9.0 0.35 410 16.2 33.25-35
37.25-35
P-39B 37.5-39 9.8 0.39 2913 114.69
40/65-39
40.5/75-39
P 41.25/70-39
G1 P-45B 45/65-45 9.8 0.39 3312 130.39
P-49B 24.00-49 9.8 0.39 3630 142.91
DB 27.00-49
P-51C 30.00-51 12.7 0.50 3695 145.47
33.00-51
36.00-51
50/65-51
67.5/60-51
P-57C 37.00-57 12.7 0.50 4129 162.56
40.00-57
Flap 50/90R57
48/95R57
46/90R57
55.5/80-57
Notes: (★1) For Rim Size 10.00-25
O-Ring (★2) For Rim Size 11.25-25

OTHER INFORMATION 77
 Rim and Valve
Rim Designation

Rim Width

Rim Flange

Rim Flange
Bead-Seat Band
Rim Base

Lock Ring

Locking Key
Bead Seat (part of lock ring)

Nominal
Diameter
Valve Hole Valve-Stem
Support

8.50V 24
Nominal Diameter of Rim (inches)
Flange Type
Rim Width (inches)

78
 Full Tapered Bead Seat Rims 5°Drop Center Rims Full Tapered Bead Seat Rims Semi Drop Center Rims Semi Drop Center Rims 5° Flat Base Rims
(5 pieces) (DC) (3 pieces) (SDC) (SDC) Flat Base Rims
A B C D

Tire size Rim Flange Tire size Rim Flange Tire size Rim Tire size Rim
Designation Contours Height Designation Contours Height Designation Contours Designation Contours
16.00 X 25 14.00 X 25 335/80R20 11 X 20 8.25 X 20NHS 6.5, 6.50T
11.25 2.0 10.00 1.5
445/95R25 385/95R25 365/80R20 11 X 20
18.00 X 25 15.5 X 25 12.00 405/70R20 13 X 20 7.0,7.00T
505/95R25 13.00 2.5 12PR max 13.00-24TG 8.00TG (14PR Max) 9.00 X 20NHS 7.0,7.00T
12.00DC(one-star max ) 1.3
18.00 X 33 9.00DC (12PR Max)
7.5,7.50V
21.00 X 25 13.00DC(12PR max
one-star max) 1.41 10.00VA
21.00 X 33 15.00 3.0 14.00-24TG 8.00TG (14PR Max) 10.00 X 20NHS 7.5,7.50V
21.00 X 35 17.5 X 25 14.00 9.00DC (12PR Max)
8.0,8.00V
24.00 X 25 12PR max
14.00DC(one-star max) 1.5 10.00VA
24.00 X 35 17.00 3.5 16.00-24TG 10.00VA 11.00 X 20NHS 8.0,8.00V
24.00 X 49 13.00DC( 12PR max
one-star max) 1.41 13.00 X 24TG 8.00TG 8.5,8.50V
27.00 X 49 19.50 4.0 9.00DC (one-star max)
445/80R25 14.00 1.5 12.00 X 20NHS 8.5,8.50V
31/90R49 19.50 4.0 10.00VA
30.00 X 51 22.00 4.5 20.5 X 25 17.00 2.0 14.00 X 24TG 8.00TG 9.00V
33.00 X 51 24.00 5.0 9.00DC (one-star max)
16PR max
17.00AL( one-star max) 1.7 12.00 X 24NHS 8.5,8.50V
36.00 X 51 26.00 5.0 10.00VA
37.00 X 57 27.00 6.0 9.00V
525/80R25 17.00 2.0 16.00 X 24TG 10.00VA
40.00 X 57 29.00 6.0 9.00DC (one-star max) 13.00 X 24NHS 10.00W
46/90R57 29.00 6.0
50/90R57 34.00 6.5 9.00V
53/80R63 36.00 5.0 14.00 X 24NHS 10.00W
55/80R63 41.00 5.0
59/80R63 44.00 5.0
23.5 X 25 19.50 2.5
26.5 X 25
22.00 3.0
26.5 X 29
29.5 X 25
29.5 X 29 25.00 3.5
29.5 X 35
33.25 X 29
27.00 3.5
33.25 X 35 A B
33.5 X 33
28.00 4.0
33.5 X 39
37.25 X 35 31.00 4.0
37.5 X 33
32.00 4.5
37.5 X 39
25/65 X 25 20.00 2.0
650/65R25 19.50 2.5
30/65 X 25
24.00 3.0
750/65R25
25.00
775/65R29 3.5
(24.00)
27.00
875/65R29 3.5
(28.00) C D
35/65 X 33 28.00 3.5
40/65 X 39 32.00 4.0
40.5/75 X 39 32.00 4.5
41.25/70 X 39 32.00 4.5
32.00
45/65R39 4.5
(36.00)
45/65 X 45 36.00 4.5
50/65 X 51 40.00 4.5
67.5/60 X 51 46.00 5.5
65/65-57 52.00 6.0
55.5/80 X 57 44.00 6.0
( ) : option size

Note: Tire size designation(X) includes “R” (Radial Ply) or “—” (Bias Ply).

OTHER SPECIFICATIONS 79
 Valve Types

Tube Valve and

Rim Section
Tube
Flap

Tube Valve
Tubeless Valve and
Rim Section Inner Liner

Standard valve location is

on center line
Optional location is shown.

Rim Valve

Tube Valve

Tubeless Valve

80
Interchangeable Swivel Valves For Tubeless Or Tube Type Tires
TRJ4000-4 1/2 Large Bore Valves
B Dimensions (mm)
Valve No.
F˚ A B F˚
TRJ650 27.5 79.5 80˚
TRJ4000-4 1/2 31 114.0 90˚
TRJ4000-8 31 203.0 90˚
TRJ4000-7 1/2 31 190.5 90˚
A
This type of VALVE consists of a com-
bination of the rubber base SP-4000 or
SP-2.

Tubeless Type Spud Tube Type Spud

SP2 SP4000

28mm

9.5mm

ø114mm
Tube Type Rubber Base Valves

TR218

B
Dimensions (mm)
A Valve No.
A B
9.5mm TR218A 20.6 11.1
TR220A 30.2 20.7

ø63.5mm

PV-7 B

86˚

Dimensions (mm)
A Valve No.
A B C D dia.
PV-7 73 100 7 90

D dia.
OTHER SPECIFICATIONS 81
 JS75 Dimensions (mm)
Valve No.
A B F˚
B JS75 24 70 82˚
TR76A 24 86 86˚
TR77A 24 105 86˚
F˚± 2˚ 86˚
TR77E 35 94
TR78A 24 127 86˚
A TR175A 24 115 86˚
TR177A 24 95 86˚
JS177B 28 91 86˚
JS179 36 133 86˚
JS179A 29 137 86˚
TR179A 24 141 86˚
PV38 24 136 80˚
PV89 42.8 123 86˚
ø95mm V3-02-3 35.8 44.5 85˚
V3-02-15 23.3 145.5 86˚

JSJ1175
B
F˚± 2˚
Large Bore Valves
A Dimensions (mm)
Valve No.
A B D dia. F˚
JSJ1078S 30 121 32 84˚
JSJ1175 35 105 32 88˚
JSJ1175B 35 105 32 80˚
JSJ1175C 35 102 32 60˚

D dia.

JS2

B
F˚

A
Dimensions (mm)
Valve No.
A B F˚
JS2 26 33 70˚

82
Tube Type Rubber Covered Valves
TR13
E

38mm
Dimensions (mm)
Valve No.
E
TR13 11.5
TR15 16.5

ø56mm

Tube Type Screw-on Valves

PV88

B D
G˚
90˚ F˚

A
C

Dimensions (mm)
Valve No.
A B C D F˚ G˚
V3-06-2 23.3 44.5 20.8 37.5 55˚ 55˚
ø95mm V3-06-5 23.3 62.5 25.9 49.0 41˚ 41˚
PV88 26.3 80.5 47.0 54.5 30˚ 30˚
PV118 35.4 130.0 84.0 – 10˚ –

TR150CW ø15.5mm

88.5mm
Valves, TR150 and TR150CW, are also
called Hand Bendable Valves, that is, their
stems are made of very flexible material
permitting manual bending in all directions
and to any angle.

ø57mm
OTHER SPECIFICATIONS 83
OTHER INFORMATION
Unit Conversion Tables
INFLATION PRESSURE WEIGHT (FROM POUND TO KILOGRAM)
2 2 2 2
Kg/cm Lb/in Kpa bar Kg/cm Lb/in Kpa bar LB KG LB KG LB KG LB KG
0.1 1 10 0.1 2.6 37 250 2.5 1 0.5 260 117.9 1200 544.3 5000 2268.0
0.2 3 20 0.2 2.7 38 260 2.6 10 4.5 280 120.0 1300 589.7 5200 2358.7
0.3 4 30 0.3 2.8 40 270 2.7 20 9.1 300 136.1 1400 635.0 5400 2449.4
0.4 6 40 0.4 2.9 41 280 2.8 30 13.6 320 145.2 1500 680.4 5600 2540.2
0.5 7 50 0.5 3.0 43 290 2.9 40 18.1 340 154.2 1600 725.8 5800 2630.9
0.6 9 60 0.6 3.1 44 300 3.0 50 22.7 360 163.3 1700 771.1 6000 2721.6
0.7 10 70 0.7 3.2 45 310 3.1 60 27.2 380 172.4 1800 816.5 7000 3175.2
0.8 11 80 0.8 3.3 47 320 3.2 70 31.8 400 181.4 1900 861.8 8000 3628.8
0.9 13 90 0.9 3.4 48 330 3.3 80 36.3 420 190.5 2000 907.2 9000 4082.4
1.0 14 100 1.0 3.5 50 340 3.4 90 40.8 440 199.6 2200 997.9 10000 4536.0
1.1 16 110 1.1 3.6 51 350 3.5 100 45.4 460 208.7 2400 1088.6 11000 4989.6
1.2 17 120 1.2 3.7 53 360 3.6 110 49.9 480 217.7 2600 1179.4 12000 5443.2
1.3 18 130 1.3 3.8 54 370 3.7 120 54.4 500 226.8 2800 1270.1 13000 5896.8
1.4 20 140 1.4 3.9 55 380 3.8 130 59.0 520 235.9 3000 1360.8 14000 6350.4
1.5 21 150 1.5 4.0 57 390 3.9 140 63.5 540 244.9 3200 1451.5 15000 6804.0
1.6 23 160 1.6 4.1 58 400 4.0 150 68.0 560 254.0 3400 1542.2 16000 7257.6
1.7 24 170 1.7 4.2 60 410 4.1 160 72.6 580 263.1 3600 1633.0 17000 7711.2
1.8 26 180 1.8 4.3 61 420 4.2 170 77.1 600 272.2 3800 1723.7 18000 8164.8
1.9 27 190 1.9 4.4 62 430 4.3 180 81.6 700 317.5 4000 1814.4 19000 8618.4
2.0 28 200 2.0 4.5 64 440 4.4 190 86.2 800 362.9 4200 1905.1 20000 9072.0
2.1 30 210 2.1 4.6 65 450 4.5 200 90.7 900 408.2 4400 1995.8
2.2 31 220 2.2 4.7 67 460 4.6 220 99.8 1000 453.6 4600 2086.6
2.3 33 230 2.3 4.8 68 470 4.7 240 108.9 1100 499.0 4800 2177.3
2.4 34 240 2.4 4.9 70 480 4.8
2.5 36 250 2.5 5.0 71 490 4.9

WEIGHT (FROM KILOGRAM TO POUND)

2 2 2
Kg/cm Lb/in Kpa bar Kg/cm Lb/in2 Kpa bar KG LB KG LB KG LB KG LB
5.1 72 490 4.9 7.6 108 740 7.4 1 2.2 130 286.6 600 1322.8 2500 5511.5
5.2 74 500 5.0 7.7 109 750 7.5 5 11.0 140 308.6 650 1433.0 2600 5732.0
5.3 75 510 5.1 7.8 111 760 7.6 10 22.0 150 330.7 700 1543.2 2700 5952.4
5.4 77 520 5.2 7.9 112 770 7.7 15 33.1 160 352.7 750 1653.5 2800 6173.0
5.5 78 530 5.3 8.0 114 780 7.8 20 44.1 170 374.8 800 1763.7 2900 6393.3
5.6 80 540 5.4 8.1 115 790 7.9 25 55.1 180 396.8 850 1873.9 3000 6613.8
5.7 81 550 5.5 8.2 116 800 8.0 30 66.1 190 418.9 900 1984.1 3500 7716.1
5.8 82 560 5.6 8.3 118 810 8.1 35 77.2 200 440.9 950 2094.4 4000 8818.4
5.9 84 570 5.7 8.4 119 820 8.2 40 88.2 210 463.0 1000 2204.6 4500 9920.7
6.0 85 580 5.8 8.5 121 830 8.3 45 99.2 220 485.0 1100 2425.1 5000 11023.0
6.1 87 590 5.9 8.6 122 840 8.4 50 110.2 230 507.1 1200 2645.5 5500 12125.3
6.2 88 600 6.0 8.7 124 850 8.5 55 121.3 240 529.1 1300 2866.0 6000 13227.6
6.3 89 610 6.1 8.8 125 860 8.6 60 132.3 250 551.2 1400 3086.4 6500 14329.9
6.4 91 620 6.2 8.9 126 870 8.7 65 143.3 260 573.2 1500 3306.9 7000 15432.2
6.5 92 630 6.3 9.0 128 880 8.8 70 154.3 270 595.2 1600 3527.4 7500 16534.5
6.6 94 640 6.4 9.1 129 890 8.9 75 165.3 280 617.3 1700 3747.8 8000 17636.8
6.7 95 650 6.5 9.2 131 900 9.0 80 176.4 290 639.3 1800 3968.3 8500 18739.1
6.8 97 660 6.6 9.3 132 910 9.1 85 187.4 300 661.4 1900 4188.7 9000 19841.4
6.9 98 670 6.7 9.4 133 920 9.2 90 198.4 350 771.6 2000 4409.2 9500 20943.7
7.0 99 680 6.8 9.5 135 930 9.3 95 209.4 400 881.8 2100 4629.7 10000 22046.0
7.1 101 690 6.9 9.6 136 940 9.4 100 220.5 450 992.1 2200 4850.1
7.2 102 700 7.0 9.7 138 950 9.5 110 242.5 500 1102.3 2300 5070.6
7.3 104 710 7.1 9.8 139 960 9.6 120 264.6 550 1212.5 2400 5291.0
7.4 105 720 7.2 9.9 141 970 9.7
7.5 107 730 7.3 10.0 142 980 9.8

84
TEMPERATURE (CENTIGRADE/FAHRENHEIT)

C° F° C° F° C° F° C° F° C° F° C° F°
-19 - 2.2 +11 +51.8 +41 +105.8 +71 +159.8 +101 +213.8 +131 +267.8
18 0.4 12 53.6 42 107.6 72 161.6 102 215.6 132 269.6
17 +1.4 13 55.4 43 109.4 73 163.4 103 217.4 133 271.4
16 3.2 14 57.2 44 111.2 74 165.2 104 219.2 134 273.2
15 5.0 15 59.0 45 113.0 75 167.0 105 221.0 135 275.0
14 6.8 16 60.8 46 114.8 76 168.8 106 222.8 136 276.8
13 8.6 17 62.6 47 116.6 77 170.6 107 224.6 137 278.6
12 10.4 18 64.4 48 118.4 78 172.4 108 226.4 138 280.4
11 12.2 19 66.2 49 120.2 79 174.2 109 228.2 139 282.2
10 14.0 20 68.0 50 122.0 80 176.0 110 230.0 140 284.0
9 15.8 21 69.8 51 123.8 81 177.8 111 231.8 141 285.8
8 17.6 22 71.6 52 125.6 82 179.6 112 233.6 142 287.6
7 19.4 23 73.4 53 127.4 83 181.4 113 235.4 143 289.4
6 21.2 24 75.2 54 129.2 84 183.2 114 237.2 144 291.2
5 23.0 25 77.0 55 131.0 85 185.0 115 239.0 145 293.0
4 24.8 26 78.8 56 132.8 86 186.8 116 240.8 146 294.8
3 26.6 27 80.6 57 134.6 87 188.6 117 242.6 147 296.6
2 28.4 28 82.4 58 136.4 88 190.4 118 244.4 148 298.4
1 30.2 29 84.2 59 138.2 89 192.2 119 246.2 149 300.2
0 32.0 30 86.0 60 140.0 90 194.0 120 248.0 150 302.0
+1 33.8 31 87.8 61 141.8 91 195.8 121 249.8 160 320.0
2 35.6 32 89.6 62 143.6 92 197.6 122 251.6 170 338.0
3 37.4 33 91.4 63 145.4 93 199.4 123 253.4 180 356.0
4 39.2 34 93.2 64 147.2 94 201.2 124 255.2 190 374.0
5 41.0 35 95.0 65 149.0 95 203.0 125 257.0 200 392.0
6 42.8 36 96.8 66 150.8 96 204.8 126 258.8
7 44.6 37 98.6 67 152.6 97 206.6 127 260.6
8 46.4 38 100.4 68 154.4 98 208.4 128 262.4
9 48.2 39 102.2 69 156.2 99 210.2 129 264.2
10 50.0 40 104.0 70 158.0 100 212.0 130 266.0

PRESSURE
kg/cm2 K · Pa Bar Psi
kg/cm 2
1 98.08 0.9808 14.22
K · Pa 0.0102 1 0.01 0.1450
Bar 1.020 100 1 14.503
Psi 0.0703 6.895 0.06895 1

OTHER INFORMATION 85
 LENGTH
m.meter c.meter meter k.meter inch foot yard mile
m.meter 1 0.10000 0.00100 - 0.03937 0.00328 0.00109 -
c.meter 10.0000 1 0.01000 0.00001 0.39371 0.03281 0.01094 -
meter 1000.00 100.00 1 0.00100 39.3707 3.28089 1.09363 0.00062
k.meter - 100000 1000.00 1 39370.7 3280.89 1093.63 0.62138
inch 25.3995 2.53995 0.02540 0.00003 1 0.08333 0.02778 0.00002
foot 304.794 30.4794 0.30479 0.00030 12.0000 1 0.33333 0.00019
yard 914.383 91.4383 0.91438 0.00091 36.0000 3.00000 1 0.00057
mile - 160931 1609.31 1.60931 63360.0 5280.00 1760.00 1

AREA
meter2 are hectare k.meter2 foot2 yard2 acre mile2
meter 2
1 0.010000 0.000100 0.000001 10.7639 1.19600 0.000247 0.000000
are 100.000 1 0.010000 0.000100 1076.39 119.600 0.024710 0.000039
hectare 10000.0 100.000 1 0.010000 107639.0 11960.0 2.47105 0.003861
k.meter2 - 10000.0 100.000 1 - - 247.105 0.386098
foot2 0.092903 0.000929 0.000009 0.000000 1 0.111111 0.000023 0.000000
yard2 0.836130 0.008361 0.000084 0.000000 9.00000 1 0.000207 0.00000
acre 4046.87 40.4687 0.404687 0.004047 43560.2 4840.00 1 0.001562
mile2 - 25900.2 259.002 2.59002 - - 640.000 1

WEIGHT
gram k.gram ton s.ton l.ton ounce pound
gram 1 0.00100 - - - 0.03527 0.00220
k.gram 1000.00 1 0.00100 0.00110 0.00098 35.2739 2.20462
ton - 1000.00 1 1.10230 0.98421 35273.9 2204.62
s.ton 907185 907.185 0.90719 1 0.89286 32000.0 2000.00
l.ton - 1016.04 1.01604 1.12000 1 35840.0 2240.00
ounce 28.3495 0.02835 0.00003 0.00003 0.00003 1 0.06250
pound 453.592 0.45359 0.00045 0.00050 0.00045 16.0000 1

CAPACITY
cub.meter liter cub.inch cub.foot cub.yard U.S.gallon U.K.gallon
cub.meter 1 1000.00 61027.1 35.3147 1.30802 264.186 220.216
liter 0.00100 1 61.0271 0.03532 0.00131 0.26419 0.22022
cub.inch 0.00002 0.01639 1 0.00058 0.00002 0.00433 0.00361
cub.foot 0.02832 28.3167 1728.00 1 0.03704 7.48051 6.23549
cub.yard 0.76455 764.554 46656.0 27.0000 1 201.974 168.358
U.S.gallon 0.00379 3.78543 231.000 0.13368 0.00495 1 0.83270
U.K.gallon 0.00455 4.54596 277.413 0.16037 0.00594 1.20091 1

TORQUE
kilogram meter kgm x 9.81 = Nm (Newton meter)

POWER
horse power HP x 0.7457 = kw (kilowatt)

86
Specific Weight (Approximately)
Material Pounds/cu.yd Metric Tons/m3 Material Pounds/cu.yd Metric Tons/m3
Anthracite 2000 1.2 Iron ore: Magnetite 4700 2.8
Basalt 3400 2.0 Limestone 2500 1.5
Bauxite 2400 1.4 Pyrites 4400 2.6
Clay: dry 2500 1.5 Over-Burden
wet 2900 1.7 75%rock-25%earth 3400 2.0
Coal 1200 0.7 50%rock-50%earth 2900 1.7
Copper ore 2700 1.6 25%rock-75%earth 2700 1.6
Crushed gypsum 2700 1.6 Sand: dry 2400 1.4
Earth: dry 2500 1.5 wet 3000 1.8
wet 2700 1.6 Sandstone 2500 1.5
Granite 2900 1.7 Snow: dry 170 0.1
Gravel: dry 2900 1.7 wet 840 0.5
wet 3400 2.0 Uranium 2700 1.6
Note: Weight of materials varies with moisture content, grain size, degree of compaction, etc. Test must be made to know
exact weight.

OTHER INFORMATION 87