Scribd
Upload
124 views4 pages

ShaliKote T 10 MSDS

This document provides safety information on ShaliKote T 10/T 10A, which is a bituminous cold applied clay type emulsion intended for general waterproofing and anti-corrosion purposes. It contains 40-50% bitumen, 30-50% montmorillonite powder, and 2-5% acid. Proper protective equipment should be worn when handling. It may cause irritation upon contact with skin, eyes, or when inhaled. In case of accidental exposure, flush affected areas and seek medical help if needed. The product is stable under normal conditions and non-hazardous for transport.

Uploaded by

Sonu Simon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
124 views4 pages

ShaliKote T 10 MSDS

This document provides safety information on ShaliKote T 10/T 10A, which is a bituminous cold applied clay type emulsion intended for general waterproofing and anti-corrosion purposes. It contains 40-50% bitumen, 30-50% montmorillonite powder, and 2-5% acid. Proper protective equipment should be worn when handling. It may cause irritation upon contact with skin, eyes, or when inhaled. In case of accidental exposure, flush affected areas and seek medical help if needed. The product is stable under normal conditions and non-hazardous for transport.

Uploaded by

Sonu Simon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

ShaliKote 10 / T 10A

Bituminous Cold Applied Clay type Emulsion

Material Safety Data Sheet

Identification of the substance/preparation and of the company/undertaking

Trade Name ShaliKote T 10 / T 10A


Intended Use General waterproofing of Concrete and Masonry
Structures, Anti-corrosion for rails and for insulation
purpose
Company Name STP Limited
43 Nehru Place
707 Chiranjiv Towers, New Delhi 110019, India
Phone : +91 11 4656 1359
Fax : +91 11 4656 1358
Emergency Information Phone : +91 81302 98888
Fax : +91 11 4656 1358

[ 1] Composition / information on ingredients

Component % CAS No
Acid 2- 5 % 8008-20-6
Bitumen 40-50 % 8052-42-4
Montmorillonite powder 30-50 % 1318-93-0

[2] Hazards Identification

Excessive inhalation can cause nausea, headache,


Inhalation
intoxication and Unconsciousness.
May cause irritation to the digestive tract and mouth causing
Ingestion
vomiting and abdominal pain
Prolonged contact will affect and dry the skin and may lead to
Skin Contact
irritation and dermatitis.
Eye Contact Will cause intense smarting and irritation

[3] First-aid Measures

Remove to fresh air. Give oxygen / artificial respiration if


Inhalation
needed. Consult Doctor.
Do not induce vomiting. Give plenty of milk or water. Consult
Ingestion
Doctor.
Flush with clean water for minimum 15 minutes. Consult
Eye Contact
Doctor.
Remove contaminated clothing. Apply proprietary skin cleaner,
Skin Contact
then wash with copious soap and water. Apply skin cream.

Page 1 of 4
[4] Fire-fighting Measures

Dry powder, CO2, Earth, Sand, Foam. Do


Extinguishing Media
not use Water.
Wear self contained breathing apparatus,
Special Fire Fighting procedures Full protective clothing. Spray drums with
Water to keep cool.
Vapour is heavier than air. Combustion
Unusual Fire & Explosion Hazards
Produces toxic gases

[5] Accidental Release Measures / Spills and Leaks

Absorb onto inert material, e.g. sand,


Steps to be taken in case material is
earth. Put into suitable containers.
released or spilled
Prevent from entering water courses

[6] Handling & Storage

Keep in tightly closed container in cool


Precautions for safe handling
dry area from all sources of ignition
Store away from oxidizing agents,
Other precautions
peroxides, Food stuffs

[7] Exposure Controls / Personal Protection

Self contained breathing apparatus if in


Respiratory Protection (Type) enclosed spaces. Otherwise, not
normally required.

[8] Ventilation

Ensure adequate ventilation to comply


Local Exhaust
with OEL.
Protective Gloves Rubber, PVC
Eye Protection Safety goggles Long sleeved overalls

[9] Physical & Chemical Properties

Appearance Dark Brown Paste


Odour Mild bituminous odour
Ph 3-7
Boiling Point/Boiling range °C N/A
Specific Gravity N/A
Vapour pressure(MM mercury N/A
Melting Point /Freezing point N/A
Water Solubility Soluble

Page 2 of 4
Viscosity N/A
Percentage Volatile by volume % 40-50 %
Evaporation Rate (Butyl Acetate=1) N/A
Flash Point °C / Method used N/A
Lower Explosive limits N/A
Upper Explosive limits NA

[10] Stability & Reactivity

Stability Stable under normal conditions


Conditions to avoid High temperatures
Oxidising agents, strong acids, alkalis,
Incompatibility/Materials to avoid
Halogens
Hazardous Decomposition Products Combustion produces toxic gases
Hazardous Polymerisation Will not occur

[11] Toxicological Information

LD 50/oral/rat = 5000 mg / Kg

[12] Ecological Information

Non pollutant

[13] Disposal Consideration

Incinerate or landfill according to local regulations

[14] Transport Information

Class Non Hazardous material


Packaging Group III
Classification Code 9
Hazard Ident. Number N/A
UN Number 1999
RID-ADR Asphalt
HI N/A
Label N/A
Technical Name Bituminous emulsion type

[15] Regulatory Information (Risk & Safety Phrases)

R10 Not Flammable


Harmful-Possible risk of irreversible
R40/21
effects. In contact with skin

Page 3 of 4
Toxic to aquatic organisms, may cause
R51/53 long-term adverse effects in the aquatic
Environment
S24 Avoid contact with skin
Wear suitable protective clothing, gloves
S36/37/39
and eye / face protection

[16] Other Health & Safety Information

Recommended uses and restrictions: See below


Source of key information used to compile SDS, CHIP regulations 1994. EH40
If this product is re-distributed and re-formulated for sale, details of its hazards and
recommended methods for safe handling must be passed to customers. Customers
are urged to ensure that the product is entirely suitable for their own purpose. It is the
customer’s responsibility to ensure that a suitable and sufficient assessment of the
risks created by a work activity using this product is undertaken before this product is
used.

Note

The information contained in this Safety Data Sheet does not constitute the users
own assessment of workplace risk as required by other Health & Safety Legislation
(e.g. the Health and Safety at Work Act, 1974; the control of Substances Hazardous
to Health Regulations, 1988). The data given here is based on current knowledge
and experience. The purpose of this data sheet is to describe the products in terms
of their safety requirements. The data does not signify any warranty with regard to
the product’s properties.

Page 4 of 4

You might also like