• Structure : upright type, realized in sheet steel epoxy coated white colour both

in- and outside. The storage compartment is divided in the middle into 2
storage compartments fully insulated and completely independent between
them, at the top the refrigerator compartment, while at the bottom the freezer.
The internal corners of both the chambers are rounded to make easy any
cleaning operations and the internal bottoms are tray type to contain spills
• Insulation : high density (40 Kg/m³) foamed-in-place polyurethane, with a
thickness of 50 mm. CFC-free
• Rollers : Nr 4 made in plastic material, to make easy any moving required
• Insulated door : Nr 2, hinged, one above the other, both made with the same
material and insulation as the rest of the structure (steel epoxy coated white
colour always both in- and outside). The doors are provided with a removable
magnetic rubber gasket in order to grant a perfect hermetic closing and
reversibility facilities, to change the doors hanging. The handles are flush-fitting
type so they do not increase the size of the cabinet. The doors are also fitted
with a spring loaded automatic closing device for openings inferior 90° and, the
top door only, with a special door switch that stops the internal ventilation at the
door opening (to limit the air cold loss) and light the internal lighting at every
opening
• Internal equipment : Nr 4 (2 for each door), storage open wire shelves
realized sheet steel with a strong plastic coating (rust-proof material). The
shelves are mounted on special anti-tilt stainless steel slides that allows the
shelf extraction and they can be easily removed and adjusted in height without
the use of any tool. The special internal racking-system allows a great flexibility
of the internal fitting with the possibility of interchange and combine both
shelves and drawers (drawers optionally available)
• Shelf dimensions (W x D cm) : 46 x 47
• Shelf loading capability (Kg) : 30 (with uniformly stored material)
• Internal lighting : Nr 1 LED tube (REFRIGERATOR COMP.), mounted in the
side wall of the storage chamber, with automatic activation both at every door
opening and even through a touchpad on the control panel. It grants energy
saving and prevents the internal heating produced by the traditional neon tubes
• Control panels : Nr 2, one for each compartment, both located in the top part of the structure (above the doors). The
control panels are both microprocessor operating with 6 soft-touchpads and LED display, allowing the control of all the
functions and working status of the appliance (including alarms). The main functions of the control panels are :
• LED display, with bright indication, red colour, of the actual internal temperature and enlightened icons in green
colour indicating the appliance working status (compressor functioning, defrosting, fan running, etc.)
• Digital temperature adjusting and displaying with an accuracy of 0,1°C
• Keyboard buttons with locking protection, manually activable, to avoid tampering from unauthorized persons
• Visual and acoustic alarm signalling (with automatic resetting) for:
- high and low temperature with limits programmable from the user
- door ajar, delayed to allow the standard operations
- power failure (at the return of the mains supply)
- anti-freezing evaporator
- sensors failure
• Muting facilities for the acoustic alarms with maintaining of the visual indication of the alarm condition
• Alarms memory for the last 10 alarm conditions, with the possibility of checking from the display, the sort of alarm,
when the alarm is started, when it is ended and which is the highest or lowest peak reached from the temperature
(where applicable)
• Ntc type sensors for a high accuracy of the temperature control
• NO/NC contact to remote the alarm signals
• Cooling unit : Nr 2, one for each compartment, both bottom mounted, completely independent between them. Each
condensing unit is compounded by Nr 1 hermetic compressor and Nr 1 finned condenser, air cooled through a fan.
Also, in the ceiling of the storage chamber, is mounted the finned evaporator with copper pipes, that is housed into a
 stainless steel cover that incorporate the fan. All the mounted components are industrial grade to grant the maximum
reliability
• Refrigerant : R404a CFC-free
• Defrosting (both compartments) : completely automatic, thermostat controlled. The condensate water is
automatically channelled into an heated tray, located in the motor compartment, for the automatic evaporation of the
condensate water
• Refrigeration (both compartments): forced-air, through a fan, granting the maximum temperature uniformity and
stability inside of the cabinet
• Temperature range :
• REFRIGERATOR COMPARTMENT : adjustable between 0°C / +15°C
• FREEZER COMPARTMENT : adjustable between -5°C / -20°C
• Voltage (V/ph/Hz) : 220-230/1/50
• Plug : Schuko type
• Breakers : Nr 4 glass cartridge fuses with a rating of 10A, at protection of the appliance
• Noise level (dB(A)) : ≤ 50
• Gross capacity (litres) :
• REFRIGERATOR COMPARTMENT : 200
• FREEZER COMPARTMENT : 200
• Net capacity (litres) :
• REFRIGERATOR COMPARTMENT : 180
• FREEZER COMPARTMENT : 180
• Dimensions (W x D x H cm) : 60 x 65 x 202
• Net weight (Kg) : 150
• Packed dimensions (W x D x H cm) : 70 x 75 x 215 (1,13 m³)
• Gross weight (Kg) : 165
ACCESSORIES AVAILABLE

Extra wire shelf Stainless steel drawer

Plastic partitions for drawers Front top for drawers

Kit of castors Safety door lock with key

Temperature chart recorder Electronic temperature printer

Internal electrical socket Cable port with cover

GSM/GPRS telephone dialer Different voltage

Wooden crate packing

Vers. May 14

* The declared performances are referred at +32°C ambient temperature, relative humidity of 70% and without any internal thermal mass (empty
cabinet).
* Should it be necessary or useful without undermining any model essential features, technical and stylistic characteristics are subject to be changed
without manufacturer’s previous notice.