Scribd
Upload
322 views2 pages

Love Light

1) The document describes how to use and create "Love Light" energy tools to charge water and crystals in order to provide benefits such as softer skin. 2) It provides instructions for creating Love Light energy tools by holding a crystal, stone, or bottle of water or oil and mentally stating "Love Light" for 20 seconds. 3) Guidance is given for passing Love Light attunements through holding hands in prayer position and thinking "Love Light Attunement" until feeling completeness.

Uploaded by

Fabian Dee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
322 views2 pages

Love Light

1) The document describes how to use and create "Love Light" energy tools to charge water and crystals in order to provide benefits such as softer skin. 2) It provides instructions for creating Love Light energy tools by holding a crystal, stone, or bottle of water or oil and mentally stating "Love Light" for 20 seconds. 3) Guidance is given for passing Love Light attunements through holding hands in prayer position and thinking "Love Light Attunement" until feeling completeness.

Uploaded by

Fabian Dee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Love Light Attunement

Love Light: Tools made with the "Love Light" energy (a specific love
frequency) are especially good for charging water. The energy makes the
water "thin" and thereby easier absorbed by the cells. You might notice a
softer skin when using the treated water.

Creating Energy Tools

It is easy to make your own energy tools with the Love Light energy!

Here's an example:

1 – Find a crystal, glass pebble or a little bottle with oil or water.

2 - Hold the item in your hands and mentally once state ”Love Light”.

3 - Hold the item in your hands for about 20 seconds and the item is ready to
use!

1
Passing on attunements

Have the receiver preferably sitting on a chair, with hands in prayer position.

Hold the receiver’s hands and think “Love Light Attunement”. Hold this
position until you feel a sense of completeness.

Then you are done and can proceed to the next, if there are more receivers.

For distant attunements simply imagine that you are holding the receiver’s
hands.

When you are done, use the disconnect and grounding exercises explained
below.

Disconnect

When performing a healing session, you connect to the person you are
sending healing to. Cutting the etheric threads that are created is important.
If you do not do this, staying connected to that person is possible. This could
result in the draining of your energy.

All you have to do when finished with the healing is to make a fast “karate
chop” in front of you, while saying something like “Cut all threads!” Do this
one to three times. Often after doing this, you will most likely feel a relief.

Grounding

After cutting threads, it’s good to do a grounding exercise. If you have outside
access, stand on the ground bare feet and mentally say, “I now ground!” Stand
for two to five minutes. If you do not have access to the ground or it’s just too
cold, just imagine that you are standing on the ground.

This is an important exercise to do to balance yourself after a healing session,


because if you have accumulated too much energy in your body, it could result
in a headache. If you have too little energy, it could result in tiredness.
Grounding will either relieve you from being overenergized or give you new
energy.

You might also like