ISO 6432, series MNI

AVENTICS™ ISO 6432, series MNI

Page 2 | AVENTICS

Mini cylinder, Series MNI

- Ø 10-25 mm
- Ports M5 G 1/8
- Single-acting, retracted without pressure
- Cushioning elastic
- with integrated rear eye
- Piston rod External thread

Standards ISO 6432

Compressed air connection Internal thread
Working pressure min./max. 2 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table below

Technical data

Piston Ø 10 mm 12 mm 16 mm 20 mm 25 mm
Piston rod thread M4 M6 M6 M8 M10x1,25
Ports M5 M5 M5 G 1/8 G 1/8
Piston rod Ø 4 mm 6 mm 6 mm 8 mm 10 mm
Cylinder outer thread M12x1,25 M16x1,5 M16x1,5 M22x1,5 M22x1,5

Stroke 10 0822430201 0822431201 0822432201 0822433201 0822434201

25 0822430202 0822431202 0822432202 0822433202 0822434202
40 0822430203 0822431209 0822432204 0822433204 0822434207
50 - 0822431203 0822432203 0822433203 0822434203

Technical data

Piston Ø 10 mm 12 mm 16 mm 20 mm

Extracting piston force 41 N 60.2 N 102.2 N 174.6 N

Spring force min. - max. 5.2 ... 8.4 N 6.7 ... 11 N 14.2 ... 24.4 N 12.8 ... 23.4 N
Impact energy 0.04 J 0.07 J 0.14 J 0.23 J
Weight 0 mm stroke 0.03 kg 0.06 kg 0.075 kg 0.14 kg
Weight +10 mm stroke 0.005 kg 0.006 kg 0.007 kg 0.016 kg
Stroke max. 40 mm 50 mm 50 mm 50 mm

PDF creation date: 20.06.2020

Page 3 | AVENTICS

Piston Ø 25 mm

Extracting piston force 279.6 N

Spring force min. - max. 19.2 ... 29.4 N
Impact energy 0.35 J
Weight 0 mm stroke 0.23 kg
Weight +10 mm stroke 0.024 kg
Stroke max. 50 mm

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).

Technical information

Material

Cylinder tube Stainless steel

Piston rod Stainless steel

Piston Brass, Aluminum

Front cover Aluminum, anodized

End cover Aluminum, anodized

Seal Acrylonitrile butadiene rubber Polyurethane

Nut for cylinder mounting Steel, galvanized

Nut for piston rod Steel, galvanized

Scraper Polyurethane

Dimensions

Dimensions

S = stroke

PDF creation date: 20.06.2020

Page 4 | AVENTICS

X = vent screw

Dimensions

Piston Ø AM-2 BE BF CD1 H9 E EE t = depth of thread EW d13 KK KV KW

10 mm 12 M12x1,25 11 4 14 M5 t=5 8 M4 17 5.5

12 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6
16 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6
20 mm 20 M22x1,5 18 8 28 G1/8 t=8 16 M8 30 7
25 mm 22 M22x1,5 21 8 28 G1/8 t=8 16 M10x1,25 30 7

Piston Ø KX KY L min MM f8 M1/M2 MR PB ±1 VA WF ±1,4 XC ±1 ZN ± 1,4 SW 1 SW 2

10 mm 7 2.2 6 4 4.8 12 37 11 16 64 73.5 13 3

12 mm 10 3.2 8 6 4.8 16 41 16 22 75 88.5 19 5
16 mm 10 3.2 8 6 4.8 16 47 17 22 82 95.5 19 5
20 mm 13 4 12 8 7 18 51 19 24 95 109.5 28 6
25 mm 17 6 12 10 7 19 55 21 28 104 119.5 28 8

PDF creation date: 20.06.2020

Page 5 | AVENTICS

Accessories overview

Overview drawing

NOTE:
This overview drawing is only for orientation to indicate where the various accessory parts can be fastened to the cylinder. The
illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.

PDF creation date: 20.06.2020

Page 6 | AVENTICS

Mini cylinder, Series MNI

- Ø 10-25 mm
- Ports M5 G 1/8
- Single-acting, retracted without pressure
- with magnetic piston
- Cushioning elastic
- with integrated rear eye
- Piston rod External thread

Standards ISO 6432

Compressed air connection Internal thread
Working pressure min./max. 2 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table below

Technical data

Piston Ø 10 mm 12 mm 16 mm 20 mm 25 mm
Piston rod thread M4 M6 M6 M8 M10x1,25
Ports M5 M5 M5 G 1/8 G 1/8
Piston rod Ø 4 mm 6 mm 6 mm 8 mm 10 mm
Cylinder outer thread M12x1,25 M16x1,5 M16x1,5 M22x1,5 M22x1,5

Stroke 10 0822430301 0822431301 0822432301 0822433301 0822434301

25 0822430302 0822431302 0822432302 0822433302 0822434302
40 0822430303 R480609773 R412009548 R480609780 R480609781
50 - 0822431303 0822432303 0822433303 0822434303

Technical data

Piston Ø 10 mm 12 mm 16 mm 20 mm

Extracting piston force 41 N 60.2 N 102.2 N 174.6 N

Spring force min. - max. 5.2 ... 8.4 N 6.7 ... 11 N 14.2 ... 24.4 N 12.8 ... 23.4 N
Impact energy 0.04 J 0.07 J 0.14 J 0.23 J
Weight 0 mm stroke 0.03 kg 0.06 kg 0.075 kg 0.14 kg
Weight +10 mm stroke 0.005 kg 0.006 kg 0.007 kg 0.016 kg

PDF creation date: 20.06.2020

Page 7 | AVENTICS

Piston Ø 10 mm 12 mm 16 mm 20 mm

Stroke max. 40 mm 50 mm 50 mm 50 mm

Piston Ø 25 mm

Extracting piston force 279.6 N

Spring force min. - max. 19.2 ... 29.4 N
Impact energy 0.35 J
Weight 0 mm stroke 0.23 kg
Weight +10 mm stroke 0.024 kg
Stroke max. 50 mm

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).
Clamping piece for magnetic field sensor necessary

Technical information

Material

Cylinder tube Stainless steel

Piston rod Stainless steel

Piston Brass, Aluminum

Front cover Aluminum, anodized

End cover Aluminum, anodized

Seal Acrylonitrile butadiene rubber Polyurethane

Nut for cylinder mounting Steel, galvanized

Nut for piston rod Steel, galvanized

Scraper Polyurethane

PDF creation date: 20.06.2020

Page 8 | AVENTICS

Dimensions

Dimensions

S = stroke
X = vent screw

Dimensions

Piston Ø AM-2 BE BF CD H9 E EE t = depth of thread EW d13 KK KV KW KX

10 mm 12 M12x1,25 11 4 14 M5 t=5 8 M4 17 5.5 7

12 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6 10
16 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6 10
20 mm 20 M22x1,5 18 8 28 G1/8 t=8 16 M8 30 7 13
25 mm 22 M22x1,5 21 8 28 G1/8 t=8 16 M10x1,25 30 7 17

Piston Ø KY L min MM f8 M1/M2 MR PB ±1 VA WF ±1,4 XC ±1 ZN ± 1,4 SW 1 SW 2

10 mm 2.2 6 4 4.8 12 47 11 16 74 83.5 13 3

12 mm 3.2 8 6 4.8 16 41 16 22 75 88.5 19 5
16 mm 3.2 8 6 4.8 16 47 17 22 82 95.5 19 5
20 mm 4 12 8 7 18 51 19 24 95 109.5 28 6
25 mm 6 12 10 7 19 55 21 28 104 119.5 28 8

PDF creation date: 20.06.2020

Page 9 | AVENTICS

Accessories overview

Overview drawing

NOTE:
This overview drawing is only for orientation to indicate where the various accessory parts can be fastened to the cylinder. The
illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.

PDF creation date: 20.06.2020

Page 10 | AVENTICS

Mini cylinder, Series MNI

- Ø 10-25 mm
- Ports M5 G 1/8
- double-acting
- Cushioning elastic
- with integrated rear eye
- Piston rod External thread
- ATEX optional

Standards ISO 6432

Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table below

Technical data

Piston Ø 10 mm 12 mm 16 mm 20 mm 25 mm
Piston rod thread M4 M6 M6 M8 M10x1,25
Ports M5 M5 M5 G 1/8 G 1/8
Piston rod Ø 4 mm 6 mm 6 mm 8 mm 10 mm
Cylinder outer thread M12x1,25 M16x1,5 M16x1,5 M22x1,5 M22x1,5

Stroke 10 0822030201 0822031201 0822032201 0822033201 0822034201

25 0822030202 0822031202 0822032202 0822033202 0822034202
50 0822030203 0822031203 0822032203 0822033203 0822034203
80 0822030204 0822031204 0822032204 0822033204 0822034204
100 0822030205 0822031205 0822032205 0822033205 0822034205
125 0822030211 0822031206 0822032206 0822033206 0822034206
160 0822030219 0822031207 0822032207 0822033207 0822034207
200 0822030222 0822031211 0822032208 0822033208 0822034208
250 0822030223 0822031221 0822032214 0822033209 0822034209
320 - 0822031226 0822032240 0822033210 0822034210
400 - 0822031214 0822032213 0822033240 0822034211
500 - 0822031250 0822032228 0822033221 0822034212

PDF creation date: 20.06.2020

Page 11 | AVENTICS

Technical data

Piston Ø 10 mm 12 mm 16 mm 20 mm 25 mm

Retracting piston force 42 N 53 N 109 N 166 N 260 N

Extracting piston force 49 N 71 N 127 N 198 N 309 N
Impact energy 0.04 J 0.07 J 0.14 J 0.23 J 0.35 J
Weight 0 mm stroke 0.034 kg 0.063 kg 0.082 kg 0.135 kg 0.233 kg
Weight +10 mm stroke 0.002 kg 0.005 kg 0.006 kg 0.009 kg 0.013 kg
Stroke max. 250 mm 600 mm 800 mm 1100 mm 1300 mm

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet
configurator.
The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.

Technical information

Material

Cylinder tube Stainless steel

Piston rod Stainless steel

Piston Brass, Aluminum

Front cover Aluminum, anodized

End cover Aluminum, anodized

Seal Acrylonitrile butadiene rubber Polyurethane

Nut for cylinder mounting Steel, galvanized

Nut for piston rod Steel, galvanized

Scraper Polyurethane

PDF creation date: 20.06.2020

Page 12 | AVENTICS

Dimensions

Dimensions

S = stroke

Dimensions

Piston Ø AM –2 BE BF CD H9 E EE t = depth of thread EW d13 KK KV KW

10 mm 12 M12x1,25 11 4 14 M5 t=5 8 M4 17 5.5

12 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6
16 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6
20 mm 20 M22x1,5 18 8 28 G 1/8 t=8 16 M8 30 7
25 mm 22 M22x1,5 21 8 28 G 1/8 t=8 16 M10x1,25 30 7

Piston Ø KX KY L min MM f8 M1/M2 MR PB ±1 VA WF ±1,4 XC ±1 ZN ± 1,4 SW 1 SW 2

10 mm 7 2.2 6 4 4.8 12 37 11 16 64 73.5 13 3

12 mm 10 3.2 8 6 4.8 16 41 16 22 75 88.5 19 5
16 mm 10 3.2 8 6 4.8 16 47 17 22 82 95.5 19 5
20 mm 13 4 12 8 7 18 51 19 24 95 109.5 28 6
25 mm 17 6 12 10 7 19 55 21 28 104 119.5 28 8

PDF creation date: 20.06.2020

Page 13 | AVENTICS

Accessories overview

Overview drawing

NOTE:
This overview drawing is only for orientation to indicate where the various accessory parts can be fastened to the cylinder. The
illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.

PDF creation date: 20.06.2020

Page 14 | AVENTICS

Mini cylinder, Series MNI

- Ø 10-25 mm
- Ports M5 G 1/8
- double-acting
- with magnetic piston
- Cushioning elastic
- with integrated rear eye
- Piston rod External thread
- ATEX optional

Standards ISO 6432

Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table below

Technical data

Piston Ø 10 mm 12 mm 16 mm 20 mm 25 mm
Piston rod thread M4 M6 M6 M8 M10x1,25
Ports M5 M5 M5 G 1/8 G 1/8
Piston rod Ø 4 mm 6 mm 6 mm 8 mm 10 mm
Cylinder outer thread M12x1,25 M16x1,5 M16x1,5 M22x1,5 M22x1,5

Stroke 10 0822330201 0822331201 0822332201 0822333201 0822334201

25 0822330202 0822331202 0822332202 0822333202 0822334202
50 0822330203 0822331203 0822332203 0822333203 0822334203
80 0822330204 0822331204 0822332204 0822333204 0822334204
100 0822330205 0822331205 0822332205 0822333205 0822334205
125 0822330215 0822331206 0822332206 0822333206 0822334206
160 0822330209 0822331207 0822332207 0822333207 0822334207
200 0822330235 0822331218 0822332208 0822333208 0822334208
250 0822330219 0822331219 0822332209 0822333209 0822334209
320 - 0822331223 0822332210 0822333210 0822334210
400 - 0822331217 0822332219 0822333214 0822334211
500 - 0822331233 0822332220 0822333220 0822334212

PDF creation date: 20.06.2020

Page 15 | AVENTICS

Technical data

Piston Ø 10 mm 12 mm 16 mm 20 mm 25 mm

Retracting piston force 42 N 53 N 109 N 166 N 260 N

Extracting piston force 49 N 71 N 127 N 198 N 309 N
Impact energy 0.04 J 0.07 J 0.14 J 0.23 J 0.35 J
Weight 0 mm stroke 0.042 kg 0.073 kg 0.091 kg 0.149 kg 0.249 kg
Weight +10 mm stroke 0.002 kg 0.005 kg 0.006 kg 0.009 kg 0.013 kg
Stroke max. 250 mm 600 mm 800 mm 1100 mm 1300 mm

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).
Clamping piece for magnetic field sensor necessary

ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet
configurator.
The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.

Technical information

Material

Cylinder tube Stainless steel

Piston rod Stainless steel

Piston Brass, Aluminum

Front cover Aluminum, anodized

End cover Aluminum, anodized

Seal Acrylonitrile butadiene rubber Polyurethane

Nut for cylinder mounting Steel, galvanized

Nut for piston rod Steel, galvanized

Scraper Polyurethane

PDF creation date: 20.06.2020

Page 16 | AVENTICS

Dimensions

Dimensions

S = stroke

Dimensions

Piston Ø AM–2 BE BF CD H9 E EE t = depth of thread EW d13 KK KV KW KX

10 mm 12 M12x1,25 11 4 14 M5 t=5 8 M4 17 5.5 7

12 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6 10
16 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6 10
20 mm 20 M22x1,5 18 8 28 G 1/8 t=8 16 M8 30 7 13
25 mm 22 M22x1,5 21 8 28 G 1/8 t=8 16 M10x1,25 30 7 17

Piston Ø KY L min MM f8 M1/M2 MR PB ±1 VA WF ±1,4 XC ±1 ZN ± 1,4 SW 1 SW 2

10 mm 2.2 6 4 4.8 12 47 11 16 74 1) 83.5 13 3

12 mm 3.2 8 6 4.8 16 41 16 22 75 88.5 19 5
16 mm 3.2 8 6 4.8 16 47 17 22 82 95.5 19 5
20 mm 4 12 8 7 18 51 19 24 95 109.5 28 6
25 mm 6 12 10 7 19 55 21 28 104 119.5 28 8

PDF creation date: 20.06.2020

Page 17 | AVENTICS

Accessories overview

Overview drawing

NOTE:
This overview drawing is only for orientation to indicate where the various accessory parts can be fastened to the cylinder. The
illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.

PDF creation date: 20.06.2020

Page 18 | AVENTICS

Mini cylinder, Series MNI

- Ø 10-25 mm
- Ports M5 G 1/8
- double-acting
- with magnetic piston
- Cushioning elastic
- with integrated rear eye
- Piston rod External thread
- Heat resistant

Standards ISO 6432

Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -10 ... 120 °C
Medium temperature min./max. -10 ... 120 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table below

Technical data

Piston Ø 10 mm 12 mm 16 mm 20 mm 25 mm
Piston rod thread M4 M6 M6 M8 M10x1,25
Ports M5 M5 M5 G 1/8 G 1/8
Piston rod Ø 4 mm 6 mm 6 mm 8 mm 10 mm
Cylinder outer thread M12x1,25 M16x1,5 M16x1,5 M22x1,5 M22x1,5

Stroke 10 0822330401 0822331401 0822332401 0822333401 0822334401

25 0822330402 0822331402 0822332402 0822333402 0822334402
50 0822330403 0822331403 0822332403 0822333403 0822334403
80 0822330404 0822331404 0822332404 0822333404 0822334404
100 0822330405 0822331405 0822332405 0822333405 0822334405
125 - 0822331406 0822332406 0822333406 0822334406
160 0822330407 0822331407 0822332407 0822333407 0822334407
200 - 0822331413 0822332408 0822333408 0822334408
250 0822330410 0822331408 R412000707 0822333409 0822334409
320 - - R412009449 0822333410 0822334410
400 - - 0822332409 - 0822334411
500 - - - 0822333416 0822334412

PDF creation date: 20.06.2020

Page 19 | AVENTICS

Technical data

Piston Ø 10 mm 12 mm 16 mm 20 mm 25 mm

Retracting piston force 42 N 53 N 109 N 166 N 260 N

Extracting piston force 49 N 71 N 127 N 198 N 309 N
Impact energy 0.04 J 0.07 J 0.14 J 0.23 J 0.35 J
Weight 0 mm stroke 0.042 kg 0.073 kg 0.091 kg 0.149 kg 0.249 kg
Weight +10 mm stroke 0.002 kg 0.005 kg 0.006 kg 0.009 kg 0.013 kg
Stroke max. 250 mm 600 mm 800 mm 1100 mm 1300 mm

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).
Clamping piece for magnetic field sensor necessary

Technical information

Material

Cylinder tube Stainless steel

Piston rod Stainless steel

Piston Brass, Aluminum

Front cover Aluminum, anodized

End cover Aluminum, anodized

Seal Fluorocaoutchouc

Nut for cylinder mounting Steel, galvanized

Nut for piston rod Steel, galvanized

Scraper Fluorocaoutchouc

PDF creation date: 20.06.2020

Page 20 | AVENTICS

Dimensions

Dimensions

S = stroke

Dimensions

Piston Ø AM–2 BE BF CD H9 E EE t = depth of thread EW d13 KK KV KW KX

10 mm 12 M12x1,25 11 4 14 M5 t=5 8 M4 17 5.5 7

12 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6 10
16 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6 10
20 mm 20 M22x1,5 18 8 28 G1/8 t=8 16 M8 30 7 13
25 mm 22 M22x1,5 21 8 28 G1/8 t=8 16 M10x1,25 30 7 17

Piston Ø KY L min MM f8 M1/M2 MR PB ±1 VA WF ±1,4 XC ±1 ZN ± 1,4 SW 1 SW 2

10 mm 2.2 6 4 4.8 12 47 11 16 74 83.5 13 3

12 mm 3.2 8 6 4.8 16 41 16 22 75 88.5 19 5
16 mm 3.2 8 6 4.8 16 47 17 22 82 95.5 19 5
20 mm 4 12 8 7 18 51 19 24 95 109.5 28 6
25 mm 6 12 10 7 19 55 21 28 104 119.5 28 8

PDF creation date: 20.06.2020

Page 21 | AVENTICS

Accessories overview

Overview drawing

NOTE:
This overview drawing is only for orientation to indicate where the various accessory parts can be fastened to the cylinder. The
illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.

PDF creation date: 20.06.2020

Page 22 | AVENTICS

Mini cylinder, Series MNI

- Ø 10-25 mm
- Ports M5 G 1/8
- double-acting
- Cushioning elastic
- Piston rod External thread
- Piston rod through
- ATEX optional

Standards ISO 6432

Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table below

Technical data

Piston Ø 10 mm 12 mm 16 mm 20 mm 25 mm
Piston rod thread M4 M6 M6 M8 M10x1,25
Ports M5 M5 M5 G 1/8 G 1/8
Piston rod Ø 4 mm 6 mm 6 mm 8 mm 10 mm
Cylinder outer thread M12x1,25 M16x1,5 M16x1,5 M22x1,5 M22x1,5

Stroke 10 0822080201 0822081201 0822082201 0822083201 0822084201

25 0822080202 0822081202 0822082202 0822083202 0822084202
50 0822080203 0822081203 0822082203 0822083203 0822084203
80 0822080204 0822081204 0822082204 0822083204 0822084204
100 0822080205 0822081205 0822082205 0822083205 0822084205
125 0822080209 0822081206 0822082206 0822083206 0822084206
160 - 0822081207 0822082207 0822083207 0822084207
200 - 0822081209 0822082208 0822083208 0822084208
250 - - - 0822083209 0822084209
320 - - - 0822083210 0822084210
400 - - - - 0822084211
500 - - - R480641970 0822084212

PDF creation date: 20.06.2020

Page 23 | AVENTICS

Technical data

Piston Ø 10 mm 12 mm 16 mm 20 mm 25 mm

Retracting piston force 42 N 53 N 109 N 166 N 260 N

Extracting piston force 42 N 53 N 109 N 166 N 260 N
Impact energy 0.04 J 0.07 J 0.14 J 0.23 J 0.35 J
Weight 0 mm stroke 0.039 kg 0.073 kg 0.091 kg 0.182 kg 0.317 kg
Weight +10 mm stroke 0.003 kg 0.005 kg 0.006 kg 0.01 kg 0.016 kg
Stroke max. 250 mm 600 mm 675 mm 675 mm 675 mm

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet
configurator.
The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.
Warning: The front and rear piston rods must not be twisted against one another!

Technical information

Material

Cylinder tube Stainless steel

Piston rod Stainless steel

Piston Brass, Aluminum

Front cover Aluminum, anodized

End cover Aluminum, anodized

Seal Acrylonitrile butadiene rubber Polyurethane

Nut for cylinder mounting Steel, galvanized

Nut for piston rod Steel, galvanized

Scraper Polyurethane

PDF creation date: 20.06.2020

Page 24 | AVENTICS

Dimensions

Dimensions

S = stroke

Dimensions

Piston Ø AM –2 BE BF E EE t = depth of thread KK KV KW KX KY MM f8

10 mm 12 M12x1,25 11 14 M5 t=5 M4 17 5.5 7 2.2 4

12 mm 16 M16x1,5 16 19 M5 t=5 M6 22 6 10 3.2 6
16 mm 16 M16x1,5 16 19 M5 t=5 M6 22 6 10 3.2 6
20 mm 20 M22x1,5 18 28 G1/8 t=8 M8 30 7 13 4 8
25 mm 22 M22x1,5 21 28 G1/8 t=8 M10x1,25 30 7 17 6 10

Piston Ø M1/M2 PB ±1 SW 1 SW 2 WF±1,4 ZL ± 1,7 ZM +0/-2,5

10 mm 4.8 37 13 3 16 62.5 80.5

12 mm 4.8 41 19 5 22 72.5 96.5
16 mm 4.8 47 19 5 22 78.5 102.5
20 mm 7 51 28 6 24 90.5 116.4
25 mm 7 55 28 8 28 98.5 128.2

PDF creation date: 20.06.2020

Page 25 | AVENTICS

Accessories overview

Overview drawing

NOTE:
This overview drawing is only for orientation to indicate where the various accessory parts can be fastened to the cylinder. The
illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.

PDF creation date: 20.06.2020

Page 26 | AVENTICS

Mini cylinder, Series MNI

- Ø 10-25 mm
- Ports M5 G 1/8
- double-acting
- with magnetic piston
- Cushioning elastic
- Polymer bearing bushing in rear eye
- Piston rod External thread

Standards ISO 6432

Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table below

Technical data

Piston Ø 10 mm 12 mm 16 mm 20 mm 25 mm
Piston rod thread M4 M6 M6 M8 M10x1,25
Ports M5 M5 M5 G 1/8 G 1/8
Piston rod Ø 4 mm 6 mm 6 mm 8 mm 10 mm
Cylinder outer thread M12x1,25 M16x1,5 M16x1,5 M22x1,5 M22x1,5

Stroke 5 - - - 5226644050 -
10 5226600100 5226610100 5226620100 5226644100 5226634100
15 5226600150 5226610150 5226620150 - 5226634150
18 - - 5226620180 - -
20 5226600200 5226610200 5226620200 5226644200 5226634200
25 5226600250 5226610250 5226620250 5226644250 5226634250
30 5226600300 5226610300 5226620300 5226644300 5226634300
35 - 5226610350 5226620350 5226644350 5226634350
40 5226600400 5226610400 5226620400 5226644400 5226634400
45 - - 5226620450 - -
50 5226600500 5226610500 5226620500 5226644500 5226634500
55 - - 5226620550 - 5226634550
60 5226600600 5226610600 5226620600 - 5226634600
65 5226600650 5226610650 - - 5226634650

PDF creation date: 20.06.2020

Page 27 | AVENTICS

Piston Ø 10 mm 12 mm 16 mm 20 mm 25 mm
Piston rod thread M4 M6 M6 M8 M10x1,25
Ports M5 M5 M5 G 1/8 G 1/8
Piston rod Ø 4 mm 6 mm 6 mm 8 mm 10 mm
Cylinder outer thread M12x1,25 M16x1,5 M16x1,5 M22x1,5 M22x1,5

70 5226600700 5226610700 5226620700 - 5226634700

75 5226600750 5226610750 5226620750 5226644750 5226634750
80 5226600800 5226610800 5226620800 5226644800 5226634800
90 - - 5226620900 - 5226634900
100 5226601000 5226611000 5226621000 5226645000 5226635000
110 - - 5226621100 - 5226635100
115 - - 5226621150 - -
120 - - 5226621200 - 5226635200
125 5226601250 5226611250 5226621250 5226645250 5226635250
130 - - - - 5226635300
135 - - 5226621350 - -
140 - - - - 5226635400
150 - 5226611500 5226621500 - 5226635500
160 5226601600 5226611600 5226621600 5226645600 5226635600
170 - - 5226621700 - 5226635700
175 - 5226611750 5226621750 - 5226635750
180 - - 5226621800 - 5226635800
190 - - 5226621900 - -
200 5226602000 5226612000 5226622000 - 5226636000
210 - - - - 5226636100
220 - - 5226622200 - 5226636200
225 - - - - 5226636250
235 - - - - 5226636350
240 - - 5226622400 - -
250 - 5226612500 5226622500 - 5226636500
260 - - - - 5226636600
265 - - 5226622650 - -
270 - - 5226622700 - 5226636700
290 - - - - 5226636900
300 - - 5226623000 5226647000 5226637000
320 - 5226613200 - - 5226637200
335 - - - - 5226637350
350 - - 5226623500 - 5226637500
400 - 5226618020 5226628020 - 5226639000
420 - - - - 5226639050
425 - - - - 5226639080
440 - - - - 5226639070
450 - - - - 5226639020
480 - 5226618010 - - -
490 - - 5226628000 - 5226639010
495 - - 5226628010 - -
500 - - - - 5226639030
550 - - 5226628040 - 5226639090
560 - - - - 5226639040

PDF creation date: 20.06.2020

Page 28 | AVENTICS

Piston Ø 10 mm 12 mm 16 mm 20 mm 25 mm
Piston rod thread M4 M6 M6 M8 M10x1,25
Ports M5 M5 M5 G 1/8 G 1/8
Piston rod Ø 4 mm 6 mm 6 mm 8 mm 10 mm
Cylinder outer thread M12x1,25 M16x1,5 M16x1,5 M22x1,5 M22x1,5

600 - - - - 5226639190
620 - - - - 5226639060
850 - - 5226628030 - -

Technical data

Piston Ø 10 mm 12 mm 16 mm 20 mm 25 mm

Retracting piston force 42 N 53 N 109 N 166 N 260 N

Extracting piston force 49 N 71 N 127 N 198 N 309 N
Impact energy 0.04 J 0.07 J 0.14 J 0.23 J 0.35 J
Weight 0 mm stroke 0.042 kg 0.073 kg 0.091 kg 0.149 kg 0.249 kg
Weight +10 mm stroke 0.002 kg 0.005 kg 0.006 kg 0.009 kg 0.013 kg
Stroke max. 250 mm 600 mm 800 mm 1100 mm 1300 mm

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).
Clamping piece for magnetic field sensor necessary

Technical information

Material

Cylinder tube Stainless steel

Piston rod Stainless steel

Piston Brass, Aluminum

Front cover Aluminum, anodized

End cover Aluminum, anodized

Seal Acrylonitrile butadiene rubber Polyurethane

Nut for cylinder mounting Steel, galvanized

Nut for piston rod Steel, galvanized

Scraper Polyurethane

PDF creation date: 20.06.2020

Page 29 | AVENTICS

Dimensions

Dimensions

S = stroke

Dimensions

Piston Ø AM–2 BE BF CD1 H10 E EE t = depth of thread EW d13 KK KV KW

10 mm 12 M12x1,25 11 4 14 M5 t=5 8 M4 17 5.5

12 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6
16 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6
25 mm 22 M22x1,5 21 8 28.6 G 1/8 t=8 16 M10x1,25 30 7
20 mm 20 M22x1,5 18 8 28.6 G 1/8 t=8 16 M8 30 7

Piston Ø KX KY L min MM f8 M1/M2 MR PB ±1 VA WF ±1,4 XC ±1 ZN ± 1,4 SW 1 SW 2

10 mm 7 2.2 6 4 4.8 12 37 11 16 64 73.5 13 3

12 mm 10 3.2 9 6 4.8 16 41 16 22 75 88.5 19 5
16 mm 10 3.2 9 6 4.8 16 47 17 22 82 95.5 19 5
25 mm 17 6 12 10 7.7 19 55 21 28 104 119.5 28 8
20 mm 13 4 12 8 7.7 18 51 19 24 95 109.5 28 6

PDF creation date: 20.06.2020

Page 30 | AVENTICS

Accessories overview

Overview drawing

NOTE:
This overview drawing is only for orientation to indicate where the various accessory parts can be fastened to the cylinder. The
illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.

PDF creation date: 20.06.2020

Page 31 | AVENTICS

Mini cylinder, Series MNI

- Ø 16-25 mm
- Ports M5 G 1/8
- double-acting
- with magnetic piston
- Cushioning pneumatically adjustable
- with integrated rear eye
- Piston rod External thread
- ATEX optional

Standards ISO 6432

Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table below

Technical data

Piston Ø 16 mm 20 mm 25 mm
Piston rod thread M6 M8 M10x1,25
Ports M5 G 1/8 G 1/8
Piston rod Ø 6 mm 8 mm 10 mm
Cylinder outer thread M16x1,5 M22x1,5 M22x1,5

Stroke 10 0822332501 0822333501 0822334501

25 0822332502 0822333502 0822334502
50 0822332503 0822333503 0822334503
80 0822332504 0822333504 0822334504
100 0822332505 0822333505 0822334505
125 0822332506 0822333506 0822334506
160 0822332507 0822333507 0822334507
200 0822332508 0822333508 0822334508
250 0822332509 0822333509 0822334509
320 0822332510 0822333510 0822334510
400 0822332511 0822333519 0822334511
500 0822332512 0822333541 0822334512

PDF creation date: 20.06.2020

Page 32 | AVENTICS

Technical data

Piston Ø 16 mm 20 mm 25 mm

Retracting piston force 109 N 166 N 260 N

Extracting piston force 127 N 198 N 309 N
Cushioning length 9 mm 13 mm 17.5 mm
Cushioning energy 0.6 J 1.5 J 2.3 J
Weight 0 mm stroke 0.1 kg 0.16 kg 0.265 kg
Weight +10 mm stroke 0.006 kg 0.009 kg 0.013 kg
Stroke max. 800 mm 1100 mm 1300 mm

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).
Clamping piece for magnetic field sensor necessary

ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet
configurator.
The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.

Technical information

Material

Cylinder tube Stainless steel

Piston rod Stainless steel

Piston Brass, Aluminum

Front cover Aluminum, anodized

End cover Aluminum, anodized

Seal Acrylonitrile butadiene rubber Polyurethane

Nut for cylinder mounting Steel, galvanized

Nut for piston rod Steel, galvanized

Scraper Polyurethane

PDF creation date: 20.06.2020

Page 33 | AVENTICS

Dimensions

Dimensions

S = stroke

Dimensions

Piston Ø AM–2 BE BF CD H9 E EE t = depth of thread EW d13 KK KV KW KX

16 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6 10
20 mm 20 M22x1,5 18 8 28 G1/8 t=8 16 M8 30 7 13
25 mm 22 M22x1,5 21 8 28 G1/8 t=8 16 M10x1,25 30 7 17

Piston Ø KY L min MM f8 M1/M2 MR PB ±1 VA WF ±1,4 XC ±1 Y±1 ZN ± 1,4 SW 1

16 mm 3.2 8 6 4.8 16 47 17 22 82 27 95.5 19

20 mm 4 12 8 7 18 51 19 24 95 32 109.5 28
25 mm 6 12 10 7 19 55 21 28 104 36 119.5 28

Piston Ø SW 2

16 mm 5
20 mm 6
25 mm 8

PDF creation date: 20.06.2020

Page 34 | AVENTICS

Diagrams

Cushioning diagram

PDF creation date: 20.06.2020

Page 35 | AVENTICS

Accessories overview

Overview drawing

NOTE:
This overview drawing is only for orientation to indicate where the various accessory parts can be fastened to the cylinder. The
illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.

PDF creation date: 20.06.2020

Page 36 | AVENTICS

Mini cylinder, Series MNI

- Ø 16-25 mm
- Ports M5 G 1/8
- double-acting
- with magnetic piston
- Cushioning pneumatically adjustable
- with integrated rear eye
- Piston rod External thread
- Heat resistant

Standards ISO 6432

Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -10 ... 120 °C
Medium temperature min./max. -10 ... 120 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table below

Technical data

Piston Ø 16 mm 20 mm 25 mm
Piston rod thread M6 M8 M10x1,25
Ports M5 G 1/8 G 1/8
Piston rod Ø 6 mm 8 mm 10 mm
Cylinder outer thread M16x1,5 M22x1,5 M22x1,5

Stroke 10 0822332451 0822333451 0822334451

25 0822332452 0822333452 0822334452
50 0822332453 0822333453 0822334453
80 0822332454 0822333454 0822334454
100 0822332455 0822333455 0822334455
125 0822332456 0822333456 0822334456
160 0822332457 0822333457 0822334457
200 0822332458 0822333458 0822334458
250 R412008586 0822333459 0822334459
320 R480638873 0822333460 0822334460
400 - 0822333462 0822334461
500 R480611199 - 0822334462

PDF creation date: 20.06.2020

Page 37 | AVENTICS

Technical data

Piston Ø 16 mm 20 mm 25 mm

Retracting piston force 109 N 166 N 260 N

Extracting piston force 127 N 198 N 309 N
Cushioning length 9 mm 13 mm 17.5 mm
Cushioning energy 0.6 J 1.5 J 2.3 J
Weight 0 mm stroke 0.1 kg 0.16 kg 0.265 kg
Weight +10 mm stroke 0.006 kg 0.009 kg 0.013 kg
Stroke max. 800 mm 1100 mm 1300 mm

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).
Clamping piece for magnetic field sensor necessary

Technical information

Material

Cylinder tube Stainless steel

Piston rod Stainless steel

Piston Brass, Aluminum

Front cover Aluminum, anodized

End cover Aluminum, anodized

Seal Fluorocaoutchouc

Nut for cylinder mounting Steel, galvanized

Nut for piston rod Steel, galvanized

Scraper Fluorocaoutchouc

PDF creation date: 20.06.2020

Page 38 | AVENTICS

Dimensions

Dimensions

S = stroke

Dimensions

Piston Ø AM–2 BE BF CD H9 E EE t = depth of thread EW d13 KK KV KW KX

16 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6 10
20 mm 20 M22x1,5 18 8 28 G1/8 t=8 16 M8 30 7 13
25 mm 22 M22x1,5 21 8 28 G1/8 t=8 16 M10x1,25 30 7 17

Piston Ø KY L min MM f8 M1/M2 MR PB ±1 VA WF ±1,4 XC ±1 ZN ± 1,4 SW 1 SW 2

16 mm 3.2 8 6 4.8 16 47 17 22 82 95.5 19 5

20 mm 4 12 8 7 18 51 19 24 95 109.5 28 6
25 mm 6 12 10 7 19 55 21 28 104 119.5 28 8

Diagrams

Cushioning diagram

PDF creation date: 20.06.2020

Page 39 | AVENTICS

Accessories overview

Overview drawing

NOTE:
This overview drawing is only for orientation to indicate where the various accessory parts can be fastened to the cylinder. The
illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.

PDF creation date: 20.06.2020

Page 40 | AVENTICS

Mini cylinder, Series MNI

- Ø 16-25 mm
- Ports M5 G 1/8
- double-acting
- Cushioning pneumatically adjustable
- with integrated rear eye
- Piston rod External thread
- ATEX optional

Standards ISO 6432

Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table below

Technical data

Piston Ø 16 mm 20 mm 25 mm
Piston rod thread M6 M8 M10x1,25
Ports M5 G 1/8 G 1/8
Piston rod Ø 6 mm 8 mm 10 mm
Cylinder outer thread M16x1,5 M22x1,5 M22x1,5

Stroke 10 0822232001 0822233001 0822234001

25 0822232002 0822233002 0822234002
50 0822232003 0822233003 0822234003
80 0822232004 0822233004 0822234004
100 0822232005 0822233005 0822234005
125 0822232006 0822233006 0822234006
160 0822232007 0822233007 0822234007
200 0822232008 0822233008 0822234008
250 0822232009 0822233009 0822234009
320 0822232010 0822233010 0822234010
400 0822232011 0822233017 0822234011
500 0822232012 0822233041 0822234012

PDF creation date: 20.06.2020

Page 41 | AVENTICS

Technical data

Piston Ø 16 mm 20 mm 25 mm

Retracting piston force 109 N 166 N 260 N

Extracting piston force 127 N 198 N 309 N
Cushioning length 9 mm 13 mm 17.5 mm
Cushioning energy 0.6 J 1.5 J 2.3 J
Weight 0 mm stroke 0.09 kg 0.146 kg 0.25 kg
Weight +10 mm stroke 0.006 kg 0.009 kg 0.013 kg
Stroke max. 800 mm 1100 mm 1300 mm

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet
configurator.
The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.

Technical information

Material

Cylinder tube Stainless steel

Piston rod Stainless steel

Piston Brass, Aluminum

Front cover Aluminum, anodized

End cover Aluminum, anodized

Seal Acrylonitrile butadiene rubber Polyurethane

Nut for cylinder mounting Steel, galvanized

Nut for piston rod Steel, galvanized

Scraper Polyurethane

PDF creation date: 20.06.2020

Page 42 | AVENTICS

Dimensions

Dimensions

S = stroke

Dimensions

Piston Ø AM –2 BE BF CD H9 E EE t = depth of thread EW d13 KK KV KW KX

16 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6 10
20 mm 20 M22x1,5 18 8 28 G1/8 t=8 16 M8 30 7 13
25 mm 22 M22x1,5 21 8 28 G1/8 t=8 16 M10x1,25 30 7 17

Piston Ø KY L min MM f8 M1/M2 MR PB ±1 VA WF ±1,4 XC ±1 ZN ± 1,4 SW 1 SW 2

16 mm 3.2 8 6 4.8 16 47 17 22 82 95.5 19 5

20 mm 4 12 8 7 18 51 19 24 95 109.5 28 6
25 mm 6 12 10 7 19 55 21 28 104 119.5 28 8

Diagrams

Cushioning diagram

PDF creation date: 20.06.2020

Page 43 | AVENTICS

Accessories overview

Overview drawing

NOTE:
This overview drawing is only for orientation to indicate where the various accessory parts can be fastened to the cylinder. The
illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.

PDF creation date: 20.06.2020

Page 44 | AVENTICS

Mini cylinder, Series MNI

- Ø 16-25 mm
- Ports M5 G 1/8
- double-acting
- with magnetic piston
- Cushioning elastic
- Piston rod External thread
- Piston rod through
- ATEX optional

Standards ISO 6432

Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table below

Technical data

Piston Ø 16 mm 20 mm 25 mm
Piston rod thread M6 M8 M10x1,25
Ports M5 G 1/8 G 1/8
Piston rod Ø 6 mm 8 mm 10 mm
Cylinder outer thread M22x1,5 M22x1,5 M22x1,5

Stroke 10 0822382001 0822383001 0822384001

25 0822382002 0822383002 0822384002
50 0822382003 0822383003 0822384003
80 0822382004 0822383004 0822384004
100 0822382005 0822383005 0822384005
125 0822382006 0822383006 0822384006
160 0822382007 0822383007 0822384007
200 0822382008 0822383008 0822384008
250 0822382010 0822383009 0822384009
320 R480623516 0822383010 0822384010
400 - - 0822384011
500 - - 0822384012

PDF creation date: 20.06.2020

Page 45 | AVENTICS

Technical data

Piston Ø 16 mm 20 mm 25 mm

Retracting piston force 109 N 166 N 260 N

Extracting piston force 109 N 166 N 260 N
Impact energy 0.14 J 0.23 J 0.35 J
Weight 0 mm stroke 0.091 kg 0.182 kg 0.317 kg
Weight +10 mm stroke 0.006 kg 0.01 kg 0.016 kg
Stroke max. 675 mm 675 mm 675 mm

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).
Clamping piece for magnetic field sensor necessary

ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet
configurator.
The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.
Warning: The front and rear piston rods must not be twisted against one another!

Technical information

Material

Cylinder tube Stainless steel

Piston rod Stainless steel

Piston Brass, Aluminum

Front cover Aluminum, anodized

End cover Aluminum, anodized

Seal Acrylonitrile butadiene rubber Polyurethane

Nut for cylinder mounting Steel, galvanized

Nut for piston rod Steel, galvanized

Scraper Polyurethane

PDF creation date: 20.06.2020

Page 46 | AVENTICS

Dimensions

Dimensions

S = stroke

Dimensions

Piston Ø AM –2 BE BF E EE t = depth of thread KK KV KW KX KY MM f8

16 mm 16 M16x1,5 16 19 M5 t=5 M6 22 6 10 3.2 6

20 mm 20 M22x1,5 18 28 G1/8 t=8 M8 30 7 13 4 8
25 mm 22 M22x1,5 21 28 G1/8 t=8 M10x1,25 30 7 17 6 10

Piston Ø M1/M2 PB ±1 SW 1 SW 2 WF ±1,4 ZL ± 1,7 ZM +0/-2,5

16 mm 4.8 47 19 5 22 78.5 102.5

20 mm 7 51 28 6 24 90.5 116.4
25 mm 7 55 28 8 28 98.5 128.2

PDF creation date: 20.06.2020

Page 47 | AVENTICS

Accessories overview

Overview drawing

NOTE:
This overview drawing is only for orientation to indicate where the various accessory parts can be fastened to the cylinder. The
illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.

PDF creation date: 20.06.2020

Page 48 | AVENTICS

Mini cylinder, Series MNI

- Ø 16-25 mm
- Ports M5 G 1/8
- double-acting
- with magnetic piston
- Cushioning pneumatically adjustable
- Polymer bearing bushing in rear eye
- Piston rod External thread

Standards ISO 6432

Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table below

Technical data

Piston Ø 16 mm 20 mm 25 mm
Piston rod thread M6 M8 M10x1,25
Ports M5 G 1/8 G 1/8
Piston rod Ø 6 mm 8 mm 10 mm
Cylinder outer thread M16x1,5 M22x1,5 M22x1,5

Stroke 10 5226720100 5226744100 5226734100

15 5226720150 5226744150 5226734150
20 - 5226744200 5226734200
25 5226720250 5226744250 5226734250
30 5226720300 5226744300 5226734300
40 5226720400 5226744400 5226734400
50 5226720500 5226744500 5226734500
60 5226720600 5226744600 5226734600
75 5226720750 5226744750 5226734750
80 5226720800 5226744800 5226734800
100 5226721000 5226745000 5226735000
125 5226721250 5226745250 5226735250
150 5226721500 5226745500 5226735500
160 5226721600 5226745600 5226735600

PDF creation date: 20.06.2020

Page 49 | AVENTICS

Piston Ø 16 mm 20 mm 25 mm
Piston rod thread M6 M8 M10x1,25
Ports M5 G 1/8 G 1/8
Piston rod Ø 6 mm 8 mm 10 mm
Cylinder outer thread M16x1,5 M22x1,5 M22x1,5

200 5226722000 5226746000 5226736000

250 - 5226746500 5226736500
300 - 5226747000 5226737000
320 - - 5226737200
350 - - 5226737500

Technical data

Piston Ø 16 mm 20 mm 25 mm

Retracting piston force 109 N 166 N 260 N

Extracting piston force 127 N 198 N 309 N
Cushioning length 9 mm 13 mm 17.5 mm
Cushioning energy 0.6 J 1.5 J 2.3 J
Weight 0 mm stroke 0.1 kg 0.16 kg 0.265 kg
Weight +10 mm stroke 0.006 kg 0.009 kg 0.013 kg
Stroke max. 800 mm 1100 mm 1300 mm

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).
Clamping piece for magnetic field sensor necessary

ATEX-certified cylinders can be generated in the Internet configurator.

ATEX ID: II 2G c IIB T4
II 2D c IP65 T125°C X
The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.

Technical information

Material

Cylinder tube Stainless steel

Piston rod Stainless steel

Piston Brass, Aluminum

Front cover Aluminum, anodized

End cover Aluminum, anodized

Seal Acrylonitrile butadiene rubber Polyurethane

Nut for cylinder mounting Steel, galvanized

Nut for piston rod Steel, galvanized

Scraper Polyurethane

PDF creation date: 20.06.2020

Page 50 | AVENTICS

Dimensions

Dimensions

S = stroke

Dimensions

Piston Ø AM–2 BE BF CD1 H10 E EE t = depth of thread EW d13 KK KV KW

16 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6
20 mm 20 M22x1,5 18 8 28.6 G 1/8 t=8 16 M8 30 7
25 mm 22 M22x1,5 21 8 28.6 G 1/8 t=8 16 M10x1,25 30 7

Piston Ø KX KY L min MM f8 M1/M2 MR PB ±1 VA WF ±1,4 XC ±1 ZN ± 1,4 SW 1 SW 2

16 mm 10 3.2 8 6 4.8 16 47 17 22 82 95.5 19 5

20 mm 13 4 12 8 7.7 18 51 19 24 95 109.5 28 6
25 mm 17 6 12 10 7.7 19 55 21 28 104 119.5 28 8

Diagrams

Cushioning diagram

PDF creation date: 20.06.2020

Page 51 | AVENTICS

Accessories overview

Overview drawing

NOTE:
This overview drawing is only for orientation to indicate where the various accessory parts can be fastened to the cylinder. The
illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.

PDF creation date: 20.06.2020

Page 52 | AVENTICS

Mini cylinder, Series MNI

- Ø 16-25 mm
- Ports M5 G 1/8
- double-acting
- with magnetic piston
- Cushioning pneumatically adjustable
- Piston rod External thread
- Piston rod through
- ATEX optional

Standards ISO 6432

Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table below

Technical data

Piston Ø 16 mm 20 mm 25 mm
Piston rod thread M6 M8 M10x1,25
Ports M5 G 1/8 G 1/8
Piston rod Ø 6 mm 8 mm 10 mm
Cylinder outer thread M16x1,5 M22x1,5 M22x1,5

Stroke 10 R480680379 R480680390 R480680402

25 R480680380 R480680391 R480680403
50 R480680381 R480680392 R480680404
80 R480680382 R480680393 R480680405
100 R480680383 R480680394 R480680406
125 R480680384 R480680395 R480680407
160 R480680385 R480680396 R480680408
200 R480680386 R480680397 R480680409
250 R480680387 R480680398 R480680410
320 R480680388 R480680399 R480680411
400 R480680389 R480680400 R480680412
500 - R480680401 R480680413

PDF creation date: 20.06.2020

Page 53 | AVENTICS

Other versions can be ordered from AVENTICS sales offices.

Technical data

Piston Ø 16 mm 20 mm 25 mm

Retracting piston force 109 N 166 N 260 N

Extracting piston force 109 N 166 N 260 N
Cushioning length 9 mm 13 mm 17.5 mm
Cushioning energy 0.6 J 1.5 J 2.3 J
Weight 0 mm stroke 0.1 kg 0.193 kg 0.334 kg
Weight +10 mm stroke 0.063 kg 0.102 kg 0.155 kg
Stroke max. 675 mm 675 mm 675 mm

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).
Clamping piece for magnetic field sensor necessary

ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet
configurator.
The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.
Warning: The front and rear piston rods must not be twisted against one another!

Technical information

Material

Cylinder tube Stainless steel

Piston rod Stainless steel

Piston Brass, Aluminum

Front cover Aluminum, anodized

End cover Aluminum, anodized

Seal Acrylonitrile butadiene rubber Polyurethane

Nut for cylinder mounting Steel, galvanized

Nut for piston rod Steel, galvanized

Scraper Polyurethane

PDF creation date: 20.06.2020

Page 54 | AVENTICS

Dimensions

Dimensions

S = stroke

Dimensions

Piston Ø AM –2 BE BF E EE t = depth of thread KK KV KW KX KY MM f8

16 mm 16 M16x1,5 16 19 M5 t=5 M6 22 6 10 3.2 6

20 mm 20 M22x1,5 18 28 G1/8 t=8 M8 30 7 13 4 8
25 mm 22 M22x1,5 21 28 G1/8 t=8 M10x1,25 30 7 17 6 10

Piston Ø M1/M2 PB ±1 SW 1 SW 2 WF ±1,4 ZL ± 1,7 ZM +0/-2,5

16 mm 4.8 47 19 5 22 78.5 102.5

20 mm 7 51 28 6 24 90.5 116.4
25 mm 7 55 28 8 28 98.5 128.2

PDF creation date: 20.06.2020

Page 55 | AVENTICS

Accessories overview

Overview drawing

NOTE:
This overview drawing is only for orientation to indicate where the various accessory parts can be fastened to the cylinder. The
illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.

PDF creation date: 20.06.2020

Page 56 | AVENTICS

Mini cylinder, Series MNI

- Ø 16-25 mm
- Ports M5 G 1/8
- double-acting
- with magnetic piston
- Cushioning pneumatically adjustable
- with integrated rear eye
- Piston rod External thread
- Piston rod non-rotating

Standards ISO 6432

Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table below

Technical data

Piston Ø 16 mm 20 mm 25 mm
Piston rod thread M6 M8 M10x1,25
Ports M5 G 1/8 G 1/8
Piston rod Ø 6 mm 8 mm 10 mm
Cylinder outer thread M16x1,5 M22x1,5 M22x1,5

Stroke 10 R480680343 R480680355 R480680367

25 R480680344 R480680356 R480680368
50 R480680345 R480680357 R480680369
80 R480680346 R480680358 R480680370
100 R480680347 R480680359 R480680371
125 R480680348 R480680360 R480680372
160 R480680349 R480680361 R480680373
200 R480680350 R480680362 R480680374
250 R480680351 R480680363 R480680375
320 R480680352 R480680364 R480680376
400 R480680353 R480680365 R480680377
500 R480680354 R480680366 R480680378

PDF creation date: 20.06.2020

Page 57 | AVENTICS

Other versions can be ordered from AVENTICS sales offices.

Technical data

Piston Ø 16 mm 20 mm 25 mm

Retracting piston force 110 N 171 N 265 N

Extracting piston force 127 N 198 N 309 N
Cushioning length 9 mm 13 mm 17.5 mm
Cushioning energy 0.6 J 1.5 J 2.3 J
Torque for torsion protection, max. 0.1 Nm 0.25 Nm 0.4 Nm
Rotation angle tolerance (±) 3.2 ° 2.5 ° 2.2 °
Weight 0 mm stroke 0.1 kg 0.16 kg 0.265 kg
Weight +10 mm stroke 0.006 kg 0.009 kg 0.013 kg
Stroke max. 800 mm 1100 mm 1300 mm

The cushioning diagram can be found in the “Technical information” document (available in the MediaCentre).

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).
Clamping piece for magnetic field sensor necessary

ATEX-certified cylinders can be generated in the Internet configurator.

ATEX ID: II 2G c IIB T4
II 2D c IP65 T125°C X
The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.

Technical information

Material

Cylinder tube Stainless steel

Piston rod Stainless steel

Piston Brass, Aluminum

Front cover Aluminum, anodized

End cover Aluminum, anodized

Seal Acrylonitrile butadiene rubber Polyurethane

Nut for cylinder mounting Steel, galvanized

Nut for piston rod Steel, galvanized

Scraper Polyurethane

PDF creation date: 20.06.2020

Page 58 | AVENTICS

Dimensions

Dimensions

Piston Ø AM–2 BE BF CD1 H9 E EE t = depth of thread EW d13 KK KV KW

16 mm 16 M16x1,5 16 6 19 M5 t=5 12 M6 22 6
20 mm 20 M22x1,5 18 8 28,6 G1/8 t=8 16 M8 30 7
25 mm 22 M22x1,5 21 8 28,6 G1/8 t=8 16 M10x1,25 30 7

Piston Ø KX KY L MK MM f8 M1/M2 MR PB ±1 VA WF ±1,4 XC ±1 Y±1 ZN ± 1,4 SW 1

16 mm 10 3.2 8 0,1 6 4.8 16 47 17 22 82 27 95.5 19

20 mm 13 4 12 0,25 8 7 18 51 19 24 95 32 109.5 28
25 mm 17 6 12 0,4 10 7 19 55 21 28 104 36 119.5 28

Piston Ø SW 2

16 mm 5
20 mm 6
25 mm 8

PDF creation date: 20.06.2020

Page 59 | AVENTICS

Accessories overview

Overview drawing

NOTE:
This overview drawing is only for orientation to indicate where the various accessory parts can be fastened to the cylinder. The
illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.

PDF creation date: 20.06.2020

Page 60 | AVENTICS

Clevis mounting AB3, Series CM1

- Suitable piston Ø 8, 10 12, 16 20, 25 mm

The delivered product may vary from that

in the illustration.

Technical data

Part No. Piston Ø Swivel bearing Ø Fig.

1827001447 8, 10 mm 4 mm Fig. 1
1827001446 12, 16 mm 6 mm Fig. 1
1827001445 20, 25 mm 8 mm Fig. 1

Scope of delivery: clevis mounting incl. pivot pins

Technical information

Material

Material Steel

galvanized

PDF creation date: 20.06.2020

Page 61 | AVENTICS

Dimensions

Fig. 1

Fig. 2
Dimensions

Dimensions

Part No. Piston Ø Fig. CM Ø CK CL FL FO MR ØT TB UH

1827001447 8, 10 mm Fig. 1 8,1 4 13,1 24 1,5 5 4,5 12,5 20

1827001446 12, 16 mm Fig. 1 12,1 6 18,1 27 2,0 7 5,5 15 25
1827001445 20, 25 mm Fig. 1 16,1 8 24,1 30 4,0 10 6,6 20 32

PDF creation date: 20.06.2020

Page 62 | AVENTICS

Flange mounting MF8, Series CM1

- Cylinder mounting in accordance with ISO 6432
- Suitable piston Ø 8, 10 12, 16 20, 25 mm

Standards ISO 6432

Technical data

Part No. Piston Ø

1821036012 8, 10 mm
1821036011 12, 16 mm
1821036010 20, 25 mm

Technical information

Material

Material Steel

galvanized

PDF creation date: 20.06.2020

Page 63 | AVENTICS

Dimensions

Dimensions

Part No. Piston Ø Ød Ø FB MF TF js14 UF UR

1821036012 8, 10 mm 12 4.5 3 30 40 25
1821036011 12, 16 mm 16 5.5 4 40 52 30
1821036010 20, 25 mm 22 6.6 5 50 66 40

PDF creation date: 20.06.2020

Page 64 | AVENTICS

Foot mounting MS3, Series CM1

- Cylinder mounting in accordance with ISO 6432
- Suitable piston Ø 8, 10 12, 16 20, 25 mm

Standards ISO 6432

Technical data

Part No. Piston Ø

1821332029 8, 10 mm
1821332028 12, 16 mm
1821332027 20, 25 mm

Technical information

Material

Material Steel

galvanized

PDF creation date: 20.06.2020

Page 65 | AVENTICS

Dimensions

Dimensions

Part No. Piston Ø AO AR AU Ø FB H13 Ø KD H13 MT NH ±0,3 js15 TR js14 US

1821332029 8, 10 mm 5 10 11 4.5 12.1 3 16 25 35

1821332028 12, 16 mm 6 13 14 5.5 16.1 4 20 32 42
1821332027 20, 25 mm 8 20 17 6.6 22.1 5 25 40 54

PDF creation date: 20.06.2020

Page 66 | AVENTICS

Nut MR3, series CM1

- for cylinder mounting
- Suitable piston Ø 8, 10 12, 16 20, 25 mm
- for series MNI CSL-RD, MNI

Weight See table below

Technical data

Part No. Piston Ø Thread size Weight

1823300024 8, 10 mm M12x1,25 0.008 kg

2915A51204 12, 16 mm M16x1,5 0.01 kg
2915051207 20, 25 mm M22x1,5 0.02 kg

Technical information

Material

Material Steel

galvanized

PDF creation date: 20.06.2020

Page 67 | AVENTICS

Dimensions

Dimensions

Part No. Piston Ø For series BE KV KW

1823300024 8, 10 mm MNI M12x1,25 17 5.5

2915A51204 12, 16 mm MNI M16x1,5 22 6
2915051207 20, 25 mm CSL-RD, MNI M22x1,5 30 7

PDF creation date: 20.06.2020

Page 68 | AVENTICS

Piston rod nut MR9

Weight See table below

Technical data

Part No. Suitable piston rod thread Weight

8103040114 M4 0.001 kg
1823300033 M6 0.004 kg
1823300034 M8 0.005 kg
1823A00020 M10x1,25 0.01 kg

Technical information

Material

Steel

galvanized

Dimensions

PDF creation date: 20.06.2020

Page 69 | AVENTICS

Dimensions

Part No. KK KV KW

1823300033 M6 10 3.2
1823300034 M8 13 4

PDF creation date: 20.06.2020

Page 70 | AVENTICS

Rod clevis AP2, Series CM2

- to mount on cylinder PRA, TRB, CCI, MNI, ICM, KPZ, KHZ, 167, CVI, RPC, RDC, ITS

Weight See table below

Technical data

Part No. Suitable piston rod thread for Weight

1822122028 M4 MNI ICM 0.01 kg

1822122009 M6 CCI MNI ICM KHZ 0.02 kg
1822122010 M8 CCI MNI ICM KHZ 0.05 kg
1822122024 M10x1,25 PRA TRB CCI MNI ICM KPZ 167 CVI RPC RDC 0.1 kg

Part No. Fig.

1822122028 Fig. 1
1822122009 Fig. 1
1822122010 Fig. 1
1822122024 Fig. 1

Technical information

Material

Steel

galvanized

PDF creation date: 20.06.2020

Page 71 | AVENTICS

Dimensions

Dimensions

Part No. KK BL CE ØCK e11 CL CM ØD1 ER LE Fig.

1822122028 M4 11 16 4 8 4 8 5 8 Fig. 1
1822122009 M6 16 24 6 12 6 10 7 12 Fig. 1
1822122010 M8 21,5 32 8 16 8 14 10 16 Fig. 1
1822122024 M10x1,25 26 40 10 20 10 18 12 20 Fig. 1

PDF creation date: 20.06.2020

Page 72 | AVENTICS

Ball eye rod end AP6, series CM2

- with flange■to mount on cylinder PRA, TRB, CCI, SSI, MNI, RPC, KPZ, 167, CVI, RDC, 102,
ITS

Weight See table below

Technical data

Part No. Suitable piston rod thread for Swivel bearing Ø

1822124000 M4 MNI SSI 5 mm

1822124001 M6 MNI CCI SSI 152.4 mm
1822124002 M8 MNI CCI SSI KPZ 203.2 mm
1822124003 M10x1,25 PRA TRB MNI CCI SSI RPC KPZ 167 CVI RDC 254 mm

Part No. Weight

1822124000 0.02 kg
1822124001 0.03 kg
1822124002 0.05 kg
1822124003 0.07 kg

Technical information

Material

Steel

galvanized

PDF creation date: 20.06.2020

Page 73 | AVENTICS

Dimensions

Dimensions

Part No. KK AA AV min. CE Ø CN H7 EN –0,1 ER EU max. LF SW Z [°] max.

1822124000 M4 12 8 27 5 8 9 7.5 9 9 4
1822124001 M6 13 9 30 6 9 10 7.5 10 11 4
1822124002 M8 16 12 36 8 12 12 9.5 12 14 4
1822124003 M10x1,25 19 15 43 10 14 14 11.5 14 17 4

PDF creation date: 20.06.2020

Page 74 | AVENTICS

Compensating coupling PM5, series

CM2
- to mount on cylinder PRA, TRB, CCL-IS/-IC, CCI, SSI, MNI, KPZ, KHZ, 167, CVI, RPC, RDC,
ITS■spherical

Weight See table below

Technical data

Part No. Suitable piston rod thread for

1826409008 M4 MNI
R412026140 M6x1 CCL-IC CCI MNI
R412026141 M8x1,25 CCL-IC CCI MNI
R412026142 M10x1,25 PRA TRB CCL-IS CCL-IC CCI SSI KPZ 167 CVI RPC

Part No. Weight

1826409008 0.02 kg
R412026140 0.02 kg
R412026141 0.05 kg
R412026142 0.21 kg

Technical information

Material

Steel

galvanized

PDF creation date: 20.06.2020

Page 75 | AVENTICS

Dimensions

* Radial joint

Dimensions

Part No. KK Ø D1 D2 Ø D3 F L ±2 L2 SW1 SW2 SW3 SW4 α [°] 1) 2)

1826409008 M4 12 13.5 4 13 33 8 12 3.2 7 12 8 0.05-0.2 0-0,5

R412026140 M6x1 8.5 14.5 6 11 36.5 11 7 5 10 13 6 0.05-0.5 0-1,5
R412026141 M8x1,25 12.5 19 8 21 58 21 11 7 13 17 8 0.05-0.5 0-1,5
R412026142 M10x1,25 22 32 14 23 74.5 23 19 12 17 30 8 0.05-0.5 0-2

1) Axial play
2) Radial play

PDF creation date: 20.06.2020

Page 76 | AVENTICS

Guide unit GU1, Series CG1

- Ø 12-25 mm
- Plain bearing
- For standard cylinders ISO 6432

Bearing type Plain bearing

Ambient temperature min./max. -20 ... 80 °C

Technical data

Suitable piston Ø 12 mm 20 mm 25 mm

Stroke 50 0821401095 0821401070 0821401080

100 0821401096 0821401071 0821401081
160 - 0821401072 0821401082
200 0821401097 0821401073 0821401083
250 - 0821401074 0821401084
400 - 0821401075 0821401085
600 - - 0821401086
800 - 0821401077 0821401087
1000 - 0821401078 -

Technical data

Suitable piston Ø 12 mm 20 mm 25 mm

Weight 0 mm stroke 0.247 kg 0.66 kg 0.66 kg

+10 mm stroke 0.008 kg 0.012 kg 0.012 kg

Technical information

Guide units for cylinder Ø 12 also fit on cylinder Ø 16

Technical information

Material

Bearing housings Aluminum, colorless anodized

Bearing type Sintered bronze

Carrying plate Aluminum, colorless anodized

PDF creation date: 20.06.2020

Page 77 | AVENTICS

Material

Flexible coupling in carrying plate Stainless steel

Guide rods Hardened heat-treated steel, ground

Dimensions

Ø 12

S = stroke
SC = cylinder stroke
X = max. play (axial)
Y = min. play (radial)

Dimensions

Piston Ø B1 B2 B3 B4 B5 B6 B7 D1 D2 D3 D4 D5 D6 G1 G2 G3 KK L1 L2 L3 L4 L5 L6

12 mm 63 54 32 46 24 27 65 16 H7 8 4.5 8 5.5 10 M16x1,5 M4 M4 M6 27 15 13 6.5 53 73

Piston Ø L7 L8 L9 L10 L11 L12 L13 L14 L15 SW1 SW2 T1 T2 T3

12 mm 6.5 25 10 52.6 38 22 30 7 18 19 8 10.6 4.6 8

PDF creation date: 20.06.2020

Page 78 | AVENTICS

Dimensions

Ø 20 ... 25 mm

S = stroke
SC = cylinder stroke
X = max. play (axial)
Y = min. play (radial)

Dimensions

Piston Ø B1 B2 B3 B4 B5 B6 B7 B8 D1 D2 D3 D4 D5 D6 D7 G1 G2 G3 KK L1

20 mm 90 55 70 74 46.5 48 24 100 22 H7 10 6.6 11 15 9 18 M22x1,5 M6 M8 M8 14

25 mm 90 55 70 74 46.5 48 24 100 22 H7 10 6.6 11 15 9 18 M22x1,5 M6 M8 M10x1,25 14

Piston Ø L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 T1 T2 T3 T4 SW

20 mm 29 38 17 8.5 8 32 65 77 71 48 12 40 30 14 22 8 7 14 9 15
25 mm 29 38 17 8.5 8 32 71 77 76 48 12 40 30 14 22 8 7 14 9 15

PDF creation date: 20.06.2020

Page 79 | AVENTICS

Diagrams

Useful load

F = Useful load, Z = Projection

Useful load
Diagrams

F = Useful load, Z = Projection

PDF creation date: 20.06.2020

Page 80 | AVENTICS

Guide unit GH1, Series CG1

- Ø 12-25 mm
- Plain bearing
- For standard cylinders ISO 6432

Bearing type Plain bearing

Ambient temperature min./max. -20 ... 80 °C

Technical data

Suitable piston Ø 12 mm 20 mm 25 mm

Stroke 50 0821401295 0821401200 0821401210

100 0821401296 0821401201 0821401211
160 - 0821401202 0821401212
200 0821401297 0821401203 0821401213
250 - 0821401204 0821401214
400 - 0821401205 0821401215
600 - 0821401206 0821401216
800 - 0821401207 0821401217

Technical data

Suitable piston Ø 12 mm 20 mm 25 mm

Weight 0 mm stroke 0.395 kg 0.73 kg 0.73 kg

+10 mm stroke 0.008 kg 0.012 kg 0.012 kg

Technical information

Guide units for cylinder Ø 12 also fit on cylinder Ø 16

Technical information

Material

Bearing housings Aluminum, colorless anodized

Bearing type Sintered bronze

Carrying plate Aluminum, colorless anodized

Flexible coupling in carrying plate Stainless steel

PDF creation date: 20.06.2020

Page 81 | AVENTICS

Material

Guide rods Hardened heat-treated steel, ground

Dimensions

Ø 12 ... 25 mm

1) Lube nipple
S = stroke
SC = cylinder stroke
X = max. play (axial)
Y = min. play (radial)

Dimensions

Piston Ø B1 B2 B3 B4 B5 B6 B7 B8 D1 D2 D3 D4 D5 D6 D7 G1 G2 G3 KK L1

12 mm 63 54 32 46 24 27 65 27 16 H7 8 – 5.5 4.5 8 10 M16x1,5 M4 M4 M6 27

20 mm 76 68 40 58 38 37 79 37 22 H7 10 11 6.6 5.5 10.5 14.5 M22x1,5 M5 M6 M8 32
25 mm 76 68 40 58 38 37 79 37 22 H7 10 11 6.6 5.5 10.5 14.5 M22x1,5 M5 M6 M10x1,25 32

Piston Ø L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 SW1 SW2 T1 T2 T3

12 mm 15 32.5 11 6.5 37 13 3 52.6 51 133 10 75 30 22 7 18 19 8 10.6 – 4.6

20 mm 20 32.5 15 8.5 58 17 3 71 65 160.5 12 108 34 23 6 22 27 13 11 7 5.7
25 mm 20 32.5 15 8.5 58 17 3 76 65 160.5 12 108 34 23 6 17 27 13 11 7 5.7

PDF creation date: 20.06.2020

Page 82 | AVENTICS

Piston Ø T4

12 mm 8
20 mm 14
25 mm 14

Diagrams

Useful load

F = Useful load, Z = Projection

Useful load
Diagrams

F = Useful load, Z = Projection

PDF creation date: 20.06.2020

Page 83 | AVENTICS

Bending
Diagramsdue to own load

Bending
Diagramsdue to 10 N load

PDF creation date: 20.06.2020

Page 84 | AVENTICS

Guide unit GH2, Series CG1

- Ø 12-25 mm
- Linear ball bearing
- For standard cylinders ISO 6432

Bearing type Linear ball bearing

Ambient temperature min./max. -20 ... 80 °C

Technical data

Suitable piston Ø 12 mm 20 mm 25 mm

Stroke 50 0821401395 0821401300 0821401310

100 0821401396 0821401301 0821401311
200 0821401397 - -
250 - 0821401302 0821401312
400 - 0821401303 0821401313
600 - 0821401304 0821401314
800 - 0821401305 0821401315

Technical data

Suitable piston Ø 12 mm 20 mm 25 mm

Weight 0 mm stroke 0.395 kg 0.73 kg 0.73 kg

+10 mm stroke 0.008 kg 0.012 kg 0.012 kg

Technical information

Guide units for cylinder Ø 12 also fit on cylinder Ø 16

Technical information

Material

Bearing housings Aluminum, colorless anodized

Bearing type Steel

Carrying plate Aluminum, colorless anodized

Flexible coupling in carrying plate Stainless steel

PDF creation date: 20.06.2020

Page 85 | AVENTICS

Material

Guide rods Hardened heat-treated steel

Dimensions

Ø 12 ... 25 mm

1) Lube nipple
S = stroke
SC = cylinder stroke
X = max. play (axial)
Y = min. play (radial)
Hexagon in guide rod

PDF creation date: 20.06.2020

Page 86 | AVENTICS

Dimensions

Piston Ø B1 B2 B3 B4 B5 B6 B7 B8 D1 D2 D3 D4 D5 D6 D7 G1 G2 G3 KK L1

12 mm 63 54 32 46 24 27 65 27 16 H7 8 – 5.5 4.5 8 10 M16x1,5 M4 M4 M6 27

20 mm 76 68 40 58 38 37 79 37 22 H7 10 11 6.6 5.5 10.5 14.5 M22x1,5 M5 M6 M8 32
25 mm 76 68 40 58 38 37 79 37 22 H7 10 11 6.6 5.5 10.5 14.5 M22x1,5 M5 M6 M10x1,25 32

Piston Ø L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 SW1 SW2 SW3 T1

12 mm 15 32.5 11 6.5 37 13 3 52.6 51 133 10 75 30 22 7 18 19 8 4 10.6

20 mm 20 32.5 15 8.5 58 17 3 71 65 160.5 12 108 34 23 6 22 27 13 5 11
25 mm 20 32.5 15 8.5 58 17 3 76 65 160.5 12 108 34 23 6 17 27 13 5 11

Piston Ø T2 T3 T4

12 mm – 4.6 8
20 mm 7 5.7 14
25 mm 7 5.7 14

Diagrams

Useful load

F = Useful load, Z = Projection

Useful load
Diagrams

Service life 5x10⁶ m

PDF creation date: 20.06.2020

Page 87 | AVENTICS

F = Useful load, Z = Projection

Bending
Diagramsdue to own load

Bending due to 10 N load

Diagrams

PDF creation date: 20.06.2020

Page 88 | AVENTICS

Holding unit, Series HU1

- Ø 20-25 mm
- hold: spring force, release: compressed air

Function Hold with clamping jaws

Release pressure 4 ... 8 bar
Ambient temperature min./max. -10 ... 60 °C
Medium temperature min./max. -10 ... 60 °C
Medium Compressed air
Max. particle size 5 µm
Oil content of compressed air 0 ... 5 mg/m³
Weight 0.11 kg

Technical data

Part No. Piston Ø suitable piston rod Ø Piston rod extension Compressed air Static holding force
connection
0821401163 20 mm 8 mm 54 mm M5 300 N
0821401164 25 mm 10 mm 51 mm M5 400 N

Holding force at 0 bar

Technical information

Warning: The holding unit may not be used for the following applications:
1) for dynamic holding
2) in or as safety equipment
Holding unit may only be unlocked when turned off.
Make sure that the load direction does not change during a holding interval. A change in the direction of force, as well as external
forces such as impacts, strong vibrations, or torsional forces, will briefly release the piston rod and may destroy the HU1 holding unit.
When clamped, there must be no residual pressure on the holding unit ( 0 bar ).
Note:
The minimum control pressure is >= the working pressure of the cylinder!

Technical information

Material

Housing Aluminum, black anodized

PDF creation date: 20.06.2020

Page 89 | AVENTICS

Dimensions

Dimensions

1) air connection
2) Holding cartridge
S = stroke

Dimensions

Piston Ø ØD1 D2 ØD3 ØD4 D5 L1 L2 L3 L4 L5 L6 L7 SW WH XC ZN

20 mm 8 M22x1,5 38 20 M5 58 35 24 27 12 21 7 30 78 149 163.5

25 mm 10 M22x1,5 38 20 M5 58 35 24 27 12 21 7 30 79 155 170.5

PDF creation date: 20.06.2020

Page 90 | AVENTICS

Sensor, Series ST4

- 4 mm T-slot
- with cable
- open cable ends, 3-pin
- UL certification
- Reed electronic PNP electronic NPN
- Direct mounting for series PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI
- Indirect mounting for series MNI, CSL-RD, ICM

Certificates UL (Underwriters Laboratories) cULus

RoHS
Ambient temperature min./max. -30 ... 80 °C
Protection class IP65, IP67
Switching point precision ±0,1 mT
Min./max. DC operating voltage See table below
Switching logic NO (make contact)
Display LED
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 35m
Mounting screw Combination: slotted and hexagon socket

Technical data

Part No. for

R412019488 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI
R412019489 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI
R412019680 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI
R412019681 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI
R412019684 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI
R412019685 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI

Part No. Type of contact Cable length Min./max. DC operating voltage

L

R412019488 Reed 3m 5 ... 30 V DC

R412019489 Reed 5m 5 ... 30 V DC
R412019680 electronic PNP 3m 10 ... 30 V DC
R412019681 electronic PNP 5m 10 ... 30 V DC
R412019684 electronic NPN 3m 10 ... 30 V DC
R412019685 electronic NPN 5m 10 ... 30 V DC

Part No. Voltage drop U at Imax DC switching current, max.

R412019488 ≤ 0,5 V 0.13 A

R412019489 ≤ 0,5 V 0.13 A
R412019680 ≤ 2,5 V 0.1 A
R412019681 ≤ 2,5 V 0.1 A

PDF creation date: 20.06.2020

Page 91 | AVENTICS

Part No. Voltage drop U at Imax DC switching current, max.

R412019684 ≤ 2,5 V 0.1 A

R412019685 ≤ 2,5 V 0.1 A

Part No. AC switching current, max. Switching capacity

R412019488 0.13 A 3 W / 3 VA
R412019489 0.13 A 3 W / 3 VA
R412019680 - -
R412019681 - -
R412019684 - -
R412019685 - -

Part No. Version

R412019488 Protected against polarity reversal

R412019489 Protected against polarity reversal
R412019680 short circuit resistant Protected against polarity reversal
R412019681 short circuit resistant Protected against polarity reversal
R412019684 short circuit resistant Protected against polarity reversal
R412019685 short circuit resistant Protected against polarity reversal

Technical information

The max. switching capacity must not be exceeded.

Technical information

Material

Housing Polyamide fiber-glass reinforced

Cable sheath Polyurethane

PDF creation date: 20.06.2020

Page 92 | AVENTICS

Dimensions

Dimensions

1) LED 2) Switching point

L = cable length
BN = brown, BK = black, BU = blue

Dimensions

Part No. A B C

R412019488 26.3 6.3 20.3

R412019489 26.3 6.3 20.3
R412019680 23.7 2.8 17.7
R412019681 23.7 2.8 17.7
R412019684 23.7 2.8 17.7
R412019685 23.7 2.8 17.7

PDF creation date: 20.06.2020

Page 93 | AVENTICS

Sensor, Series ST4

- 4 mm T-slot
- with cable
- open cable ends
- With stretched impulse
- With stretched impulse
- electronic PNP
- Direct mounting for series PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI
- Indirect mounting for series MNI, CSL-RD, ICM

Certificates RoHS
Ambient temperature min./max. -30 ... 80 °C
Protection class IP65, IP67
Switching point precision ±0,1 mT
Min./max. DC operating voltage 10 ... 30 V DC
Switching logic NO (make contact)
Pulse stretching 20 ms
Display LED
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 5m
Mounting screw Combination: slotted and hexagon socket

Technical data

Part No. for Type of contact

R412024124 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI electronic PNP

Part No. Cable length Voltage drop U at Imax DC switching current, max.
L

R412024124 5m ≤ 2,5 V 0.1 A

Part No. Switch signal

R412024124 With stretched impulse

Technical information

The max. switching capacity must not be exceeded.

PDF creation date: 20.06.2020

Page 94 | AVENTICS

Technical information

Material

Housing Polyamide fiber-glass reinforced

Cable sheath Polyurethane

Dimensions

Dimensions

1) LED 2) Switching point

L = cable length
BN = brown, BK = black, BU = blue

Dimensions

Part No. A B C

R412024124 23.7 2.8 17.7

PDF creation date: 20.06.2020

Page 95 | AVENTICS

Sensor, Series ST4

- 4 mm T-slot
- with cable
- Plug, M8, 3-pin
- UL certification
- Reed electronic PNP electronic NPN
- Direct mounting for series PRA, SSI, GSU, RTC, CKP, GSP, MSC, MSN, RCM, CVI
- Indirect mounting for series MNI, CSL-RD, ICM

Certificates UL (Underwriters Laboratories) cULus

RoHS
Ambient temperature min./max. -30 ... 80 °C
Protection class IP65, IP67
Switching point precision ±0,1 mT
Min./max. DC operating voltage See table below
Switching logic NO (make contact)
Display LED
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 0.3 m
Mounting screw Combination: slotted and hexagon socket

Technical data

Part No. for

R412019682 PRA, SSI, GSU, RTC, CKP, GSP, MSC, MSN, RCM, CVI
R412019683 PRA, SSI, GSU, RTC, CKP, GSP, MSC, MSN, RCM, CVI
R412019694 PRA, SSI, GSU, RTC, CKP, GSP, MSC, MSN, RCM, CVI

Part No. Type of contact Cable length Min./max. DC operating voltage

L

R412019682 Reed 0.3 m 5 ... 30 V DC

R412019683 electronic PNP 0.3 m 10 ... 30 V DC
R412019694 electronic NPN 0.3 m 10 ... 30 V DC

Part No. Voltage drop U at Imax DC switching current, max.

R412019682 ≤ 0,5 V 0.13 A

R412019683 ≤ 2,5 V 0.1 A
R412019694 ≤ 2,5 V 0.1 A

Part No. AC switching current, max. Switching capacity

R412019682 0.13 A 3 W / 3 VA
R412019683 - -
R412019694 - -

PDF creation date: 20.06.2020

Page 96 | AVENTICS

Part No. Version

R412019682 Protected against polarity reversal

R412019683 short circuit resistant Protected against polarity reversal
R412019694 short circuit resistant Protected against polarity reversal

Technical information

The max. switching capacity must not be exceeded.

Technical information

Material

Housing Polyamide fiber-glass reinforced

Cable sheath Polyurethane

Dimensions

Dimensions

1) LED 2) Switching point

L = cable length

PDF creation date: 20.06.2020

Page 97 | AVENTICS

Dimensions

Part No. A B C

R412019682 26.3 6.3 20.3

R412019683 23.7 2.8 17.7
R412019694 23.7 2.8 17.7

Pin assignments

Pin assignments

Pin 1 3 4

Allocation (+) (-) (OUT)

PDF creation date: 20.06.2020

Page 98 | AVENTICS

Sensor, Series ST4

- 4 mm T-slot
- with cable
- Plug, M8, 3-pin, with knurled screw
- UL certification
- Reed electronic PNP
- Direct mounting for series PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI
- Indirect mounting for series MNI, CSL-RD, ICM

Certificates UL (Underwriters Laboratories) cULus

RoHS
Ambient temperature min./max. -30 ... 80 °C
Protection class IP65, IP67
Switching point precision ±0,1 mT
Min./max. DC operating voltage See table below
Switching logic NO (make contact)
Display LED
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 0.3 0.5 m
Mounting screw Combination: slotted and hexagon socket

Technical data

Part No. for

R412019490 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI
R412019686 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI
R412019493 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI
R412019687 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI

Part No. Type of contact Cable length Min./max. DC operating voltage

L

R412019490 Reed 0.3 m 5 ... 30 V DC

R412019686 Reed 0.5 m 5 ... 30 V DC
R412019493 electronic PNP 0.3 m 10 ... 30 V DC
R412019687 electronic PNP 0.5 m 10 ... 30 V DC

Part No. Voltage drop U at Imax DC switching current, max.

R412019490 ≤ 0,5 V 0.13 A

R412019686 ≤ 0,5 V 0.13 A
R412019493 ≤ 2,5 V 0.1 A
R412019687 ≤ 2,5 V 0.1 A

Part No. AC switching current, max. Switching capacity

R412019490 0.13 A 3 W / 3 VA

PDF creation date: 20.06.2020

Page 99 | AVENTICS

Part No. AC switching current, max. Switching capacity

R412019686 0.13 A 3 W / 3 VA
R412019493 - -
R412019687 - -

Part No. Version

R412019490 Protected against polarity reversal

R412019686 Protected against polarity reversal
R412019493 short circuit resistant Protected against polarity reversal
R412019687 short circuit resistant Protected against polarity reversal

Technical information

The max. switching capacity must not be exceeded.

Technical information

Material

Housing Polyamide fiber-glass reinforced

Cable sheath Polyurethane

PDF creation date: 20.06.2020

Page 100 | AVENTICS

Dimensions

Dimensions

1) LED 2) Switching point

L = cable length

Dimensions

Part No. A B C

R412019490 26.3 6.3 20.3

R412019686 26.3 6.3 20.3
R412019493 23.7 2.8 17.7
R412019687 23.7 2.8 17.7

Pin assignments

Pin assignments

PDF creation date: 20.06.2020

Page 101 | AVENTICS

Pin 1 3 4

Allocation (+) (-) (OUT)

PDF creation date: 20.06.2020

Page 102 | AVENTICS

Sensor, Series ST4

- 4 mm T-slot
- with cable
- Plug, M8, 3-pin Plug, M8, 3-pin, with knurled screw
- With stretched impulse
- With stretched impulse
- electronic NPN electronic PNP
- Direct mounting for series PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI
- Indirect mounting for series MNI, CSL-RD, ICM

Certificates RoHS
Ambient temperature min./max. -30 ... 80 °C
Protection class IP65, IP67
Switching point precision ±0,1 mT
Min./max. DC operating voltage 10 ... 30 V DC
Switching logic NO (make contact)
Pulse stretching 20 ms
Display LED
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 0.3 m
Mounting screw Combination: slotted and hexagon socket

Technical data

Part No. for Type of contact

R412024123 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI electronic NPN
R412024125 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI electronic PNP

Part No. Cable length Voltage drop U at Imax DC switching current, max.
L

R412024123 0.3 m ≤ 2,5 V 0.1 A

R412024125 0.3 m ≤ 2,5 V 0.1 A

Part No. Switch signal

R412024123 With stretched impulse 1)

R412024125 With stretched impulse 2)

1) Plug M8, 3-pin

2) Plug M8, 3-pin, with knurled screw

PDF creation date: 20.06.2020

Page 103 | AVENTICS

Technical information

The max. switching capacity must not be exceeded.

Technical information

Material

Housing Polyamide fiber-glass reinforced

Cable sheath Polyurethane

Dimensions

Dimensions

1) LED 2) Switching point

L = cable length

PDF creation date: 20.06.2020

Page 104 | AVENTICS

Pin assignments

Pin assignments

Pin 1 3 4

Allocation (+) (-) (OUT)

PDF creation date: 20.06.2020

Page 105 | AVENTICS

Sensor, Series ST4

- 4 mm T-slot
- with cable
- Plug, M12, 3-pin, with knurled screw
- UL certification
- Reed electronic PNP
- Direct mounting for series PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI
- Indirect mounting for series MNI, CSL-RD, ICM

Certificates UL (Underwriters Laboratories) cULus

RoHS
Ambient temperature min./max. -30 ... 80 °C
Protection class IP65, IP67
Switching point precision ±0,1 mT
Min./max. DC operating voltage See table below
Switching logic NO (make contact)
Display LED
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 0.3 m
Mounting screw Combination: slotted and hexagon socket

Technical data

Part No. for

R412019688 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI
R412019689 PRA, SSI, GSU, RTC, CKP, GPC, MSC, MSN, RCM, CVI

Part No. Type of contact Cable length Min./max. DC operating voltage

L

R412019688 Reed 0.3 m 5 ... 30 V DC

R412019689 electronic PNP 0.3 m 10 ... 30 V DC

Part No. Voltage drop U at Imax DC switching current, max.

R412019688 ≤ 0,5 V 0.13 A

R412019689 ≤ 2,5 V 0.1 A

Part No. AC switching current, max. Switching capacity

R412019688 0.13 A 3 W / 3 VA
R412019689 - -

Part No. Version

R412019688 Protected against polarity reversal

PDF creation date: 20.06.2020

Page 106 | AVENTICS

Part No. Version

R412019689 short circuit resistant Protected against polarity reversal

Technical information

The max. switching capacity must not be exceeded.

Technical information

Material

Housing Polyamide fiber-glass reinforced

Cable sheath Polyurethane

Dimensions

Dimensions

1) LED 2) Switching point

L = cable length

PDF creation date: 20.06.2020

Page 107 | AVENTICS

Dimensions

Part No. A B C

R412019688 26.3 6.3 20.3

R412019689 23.7 2.8 17.7

Pin assignments

Pin 1 3 4

Allocation (+) (-) (OUT)

PDF creation date: 20.06.2020

Page 108 | AVENTICS

Sensors, Series ST4-2P

- 4 mm T-slot
- number of switching points 2
- with cable
- without wire end ferrule, tin-plated, 4-pin
- electronic PNP
- 2 switching points
- electronic PNP
- Direct mounting for series PRA, SSI, RTC, GPC, MSC, MSN, RCM, CVI
- Indirect mounting for series MNI, CSL-RD, ICM

Certificates RoHS
Ambient temperature min./max. -20 ... 75 °C
Protection class IP65, IP67
number of switching points 2
Power consumption 15 mA
Min./max. DC operating voltage 12 ... 30 V DC
Repetitive precision max. measuring 0,1 mT
range
Hysteresis 1 mT
Switching logic NO (make contact)
Display LED
LED status display Yellow
Display 2 LED
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 2m
Mounting screw with hexagon socket

Technical data

Part No. for Type of contact Cable length

L

R412010139 PRA, SSI, RTC, GPC, MSC, MSN, RCM, CVI electronic PNP 2m

Part No. Detection range Voltage drop U at Imax DC switching current, max.
max.

R412010139 50 mm ≤ 2,2 V 0.15 A

Part No. Function Version

R412010139 electronic PNP short circuit resistant Protected against polarity reversal

Technical information

Material

Housing Polyamide

Cable sheath Polyurethane

PDF creation date: 20.06.2020

Page 109 | AVENTICS

Dimensions

Dimensions

1* = mounting screw 2* = teach button 3* = LED

L = cable length
(1) BN=brown
(2) WH=white
(3) BU=blue
(4) BK=black
* Switching point

PDF creation date: 20.06.2020

Page 110 | AVENTICS

Sensors, Series ST4-2P

- 4 mm T-slot
- number of switching points 2
- with cable
- Plug, M8x1, 4-pin, with knurled screw
- electronic PNP
- 2 switching points
- electronic PNP
- Direct mounting for series PRA, SSI, RTC, GPC, MSC, MSN, RCM, CVI
- Indirect mounting for series MNI, CSL-RD, ICM

Certificates RoHS
Ambient temperature min./max. -20 ... 75 °C
Protection class IP65, IP67
number of switching points 2
Power consumption 15 mA
Min./max. DC operating voltage 12 ... 30 V DC
Repetitive precision max. measuring 0,1 mT
range
Hysteresis 1 mT
Switching logic NO (make contact)
Display LED
LED status display Yellow
Display 2 LED
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 0.3 m
Mounting screw with hexagon socket

Technical data

Part No. for Type of contact Cable length

L

R412010140 PRA, SSI, RTC, GPC, MSC, MSN, RCM, CVI electronic PNP 0.3 m

Part No. Detection range Voltage drop U at Imax Function

max.

R412010140 50 mm ≤ 2,2 V electronic PNP

Part No. Version

R412010140 short circuit resistant Protected against polarity reversal

Technical information

Material

Housing Polyamide

Cable sheath Polyurethane

PDF creation date: 20.06.2020

Page 111 | AVENTICS

Dimensions

Dimensions

1* = mounting screw 2* = teach button 3* = LED

L = cable length
* Switching point

Pin assignments

Pin 1 2 3 4

Allocation (+) (OUT) (-) (OUT)

PDF creation date: 20.06.2020

Page 112 | AVENTICS

Sensors, Series ST4-2P

- 4 mm T-slot
- number of switching points 2
- with cable
- Plug, M12x1, 4-pin, with knurled screw
- IO-Link, 2 switching points
- electronic PNP
- Direct mounting for series PRA, SSI, RTC, GPC, MSC, MSN, RCM, CVI
- Indirect mounting for series MNI, CSL-RD, ICM

Certificates RoHS
Ambient temperature min./max. -20 ... 75 °C
Protection class IP67
number of switching points 2
Power consumption 15 mA
Min./max. DC operating voltage 12 ... 30 V DC
Repetitive precision max. measuring 0,1 mT
range
Hysteresis 1 mT
Switching logic NO (make contact)
LED status display Yellow
Display 2 LED
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 0.3 m
Mounting screw with hexagon socket

Technical data

Part No. for Type of contact Cable length

L

R412023459 PRA, SSI, RTC, GPC, MSC, MSN, RCM, CVI electronic PNP 0.3 m

Part No. Detection range Voltage drop U at Imax

max.

R412023459 50 mm ≤ 2,2 V

Part No. Version

R412023459 Wire break protection Short circuit resistance Reverse polarity protection Switch-on pulse suppression

Technical information

The IO-Link device description (IODD) for the ST4-2P proximity sensor is available for download in the Media Centre.

PDF creation date: 20.06.2020

Page 113 | AVENTICS

Technical information

Material

Housing Polyamide

Cable sheath Polyurethane

Dimensions

Dimensions

1* = mounting screw 2* = teach button 3* = LED

L = cable length
PIN assignment: 1 = (+), 2 = (OUT), 3 = (-), 4 = (OUT) IO-Link
* Switching point

Pin assignments

Pin 1 2 3 4

Allocation (+) (OUT) (-) IO-Link (OUT)

PDF creation date: 20.06.2020

Page 114 | AVENTICS

Sensor, Series ST6

- 6 mm T-slot
- with cable
- open cable ends, 3-pin
- ATEX
- UL certification, ATEX
- electronic PNP
- Direct mounting for series PRA, PRE, CCI, KPZ, SSI, GPC, CVI
- Indirect mounting for series TRB, ITS, CCL-IS, MNI, CSL-RD, RPC, ICS-D2, ICM, KHZ, TRR

Certificates ATEX CE declaration of conformity cULus

RoHS
ATEX class G II 3G Ex nA IIC T4 Gc X
ATEX class D II 3D Ex tc IIIC T135°C Dc X
Ambient temperature min./max. -20 ... 50 °C
Protection class IP67
Switching point precision ±0,1 mT
Quiescent current (without load) 10 mA
Min./max. DC operating voltage 10 ... 30 V DC
Switching logic NO (make contact)
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 35m

Technical data

Part No. for Type of contact Cable length

L

R412022854 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP 3m
R412022856 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP 5m

Part No. Voltage drop U at Imax DC switching current, max.

R412022854 ≤ 2,5 V 0.1 A

R412022856 ≤ 2,5 V 0.1 A

Part No. Max. switching frequency

R412022854 1000 Hz
R412022856 1000 Hz

Part No. Version

R412022854 short circuit resistant Protected against polarity reversal

PDF creation date: 20.06.2020

Page 115 | AVENTICS

Part No. Version

R412022856 short circuit resistant Protected against polarity reversal

Technical information

Material

Housing Polyamide

Cable sheath Polyurethane

Locking screw Stainless steel

Dimensions

Fig. 2

1* = switching point 2* = locking screw 3* = LED window, transparent

L = cable length
BN = brown, BK = black, BU = blue
X = electronic: 11.6 mm

PDF creation date: 20.06.2020

Page 116 | AVENTICS

Sensor, Series ST6

- 6 mm T-slot
- with cable
- open cable ends, 2-pin open cable ends, 3-pin
- UL certification
- Reed electronic PNP electronic NPN
- Direct mounting for series PRA, PRE, CCI, KPZ, SSI, GPC, CVI
- Indirect mounting for series TRB, ITS, CCL-IS, MNI, CSL-RD, RPC, ICS-D2, ICM, KHZ, TRR

Ambient temperature min./max. -30 ... 80 °C

Protection class IP65, IP67, IP69K
Switching point precision ±0,1 mT
Nominal current, actuated state 30 mA
Quiescent current (without load) 8 mA
Min./max. DC operating voltage See table below
Min./max. AC operating voltage See table below
Hysteresis ≥ 0,2 mT
Switching logic NO (make contact)
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 3 5 10 m

PDF creation date: 20.06.2020

Page 117 | AVENTICS

Technical data

Part No. for Type of contact

R412022866 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Reed

R412027170 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Reed
R412022869 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Reed
R412022870 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Reed
R412022871 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Reed
R412022853 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP
R412022855 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP
R412022857 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP
R412022849 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic NPN
R412022850 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic NPN

Part No. Cable length Min./max. DC operating voltage Min./max. AC operating voltage
L

R412022866 3m 10 ... 230 V DC 10 ... 230 V AC

R412027170 5m 10 ... 230 V DC 10 ... 230 V AC
R412022869 3m 10 ... 30 V DC 10 ... 30 V AC
R412022870 5m 10 ... 30 V DC 10 ... 30 V AC
R412022871 10 m 10 ... 30 V DC 10 ... 30 V AC
R412022853 3m 10 ... 30 V DC -
R412022855 5m 10 ... 30 V DC -
R412022857 10 m 10 ... 30 V DC -
R412022849 3m 10 ... 30 V DC -
R412022850 5m 10 ... 30 V DC -

Part No. Voltage drop U at Imax DC switching current, max.

R412022866 ≤ 3,5 V 0.13 A

R412027170 ≤ 3,5 V 0.13 A
R412022869 I*Rs 0.3 A
R412022870 ≤ 0,1 V 0.3 A
R412022871 I*Rs 0.3 A
R412022853 ≤ 2,5 V 0.13 A
R412022855 ≤ 2,5 V 0.13 A
R412022857 ≤ 2,5 V 0.13 A
R412022849 ≤ 2,5 V 0.13 A
R412022850 ≤ 2,5 V 0.13 A

Part No. AC switching current, max. Switching capacity

R412022866 0.13 A Reed, 2-pin: max. 10 W

R412027170 0.13 A Reed, 2-pin: max. 10 W
R412022869 0.5 A Reed, 3-pin: max. 6 W
R412022870 0.5 A Reed, 3-pin: max. 6 W
R412022871 0.5 A Reed, 3-pin: max. 6 W

PDF creation date: 20.06.2020

Page 118 | AVENTICS

Part No. AC switching current, max. Switching capacity

R412022853 - -
R412022855 - -
R412022857 - -
R412022849 - -
R412022850 - -

Part No. Max. switching frequency Operating current, not switched

R412022866 400 Hz -
R412027170 400 Hz -
R412022869 400 Hz -
R412022870 400 Hz -
R412022871 400 Hz -
R412022853 1000 Hz 8 mA
R412022855 1000 Hz 8 mA
R412022857 1000 Hz 8 mA
R412022849 1000 Hz 8 mA
R412022850 1000 Hz 8 mA

Part No. Operating current, switched

R412022866 -
R412027170 -
R412022869 -
R412022870 -
R412022871 -
R412022853 30 mA
R412022855 30 mA
R412022857 30 mA
R412022849 30 mA
R412022850 30 mA

Part No. Version Fig.

R412022866 Protected against polarity reversal Fig. 1 1)

R412027170 Protected against polarity reversal Fig. 1 1)
R412022869 Protected against polarity reversal Fig. 2 2)
R412022870 Protected against polarity reversal Fig. 2 2)
R412022871 Protected against polarity reversal Fig. 2 2)
R412022853 short circuit resistant Protected against polarity reversal Fig. 2 3)
R412022855 short circuit resistant Protected against polarity reversal Fig. 2 3)
R412022857 short circuit resistant Protected against polarity reversal Fig. 2 3)
R412022849 short circuit resistant Protected against polarity reversal Fig. 2 3)
R412022850 short circuit resistant Protected against polarity reversal Fig. 2 3)

1) open cable ends, 2-pin, The product of operating voltage and continuous current must not exceed the maximum switching capacity.
2) open cable ends, 3-pin, The product of operating voltage and continuous current must not exceed the maximum switching capacity.
3) open cable ends, 3-pin

PDF creation date: 20.06.2020

Page 119 | AVENTICS

Technical information

No cULus certification for 230 V variant.

Technical information

Material

Housing Polyamide

Cable sheath Polyurethane

Locking screw Stainless steel

Dimensions

Fig. 1

1* = switching point 2* = locking screw 3* = LED window, transparent

L = cable length
BN=brown, BU=blue

PDF creation date: 20.06.2020

Page 120 | AVENTICS

Fig. 2
Dimensions

1* = switching point 2* = locking screw 3* = LED window, transparent

L = cable length
BN = brown, BK = black, BU = blue
X = electronic: 11.6 mm

PDF creation date: 20.06.2020

Page 121 | AVENTICS

Sensor, Series ST6

- 6 mm T-slot
- with cable
- Plug, M8, 3-pin Plug, M8, 2-pin
- UL certification
- Reed electronic PNP electronic NPN
- Direct mounting for series PRA, PRE, CCI, KPZ, SSI, GPC, CVI
- Indirect mounting for series TRB, ITS, CCL-IS, MNI, CSL-RD, RPC, ICS-D2, ICM, KHZ, TRR

Certificates CE declaration of conformity cULus RoHS

Ambient temperature min./max. -30 ... 80 °C
Protection class IP65, IP67
Switching point precision ±0,1 mT
Nominal current, actuated state 30 mA
Quiescent current (without load) 8 mA
Min./max. DC operating voltage 10 ... 30 V DC
Min./max. AC operating voltage See table below
Hysteresis ≥ 0,2 mT
Switching logic NO (make contact)
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 0.3 m

Technical data

Part No. for Type of contact

R412022868 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Reed

R412027172 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Reed
R412022872 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Reed
R412022858 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP
R412022851 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic NPN

Part No. Cable length Min./max. AC operating voltage Voltage drop U at Imax
L

R412022868 0.3 m 10 ... 30 V AC ≤ 3,5 V

R412027172 0.3 m 10 ... 30 V AC ≤ 3,5 V
R412022872 0.3 m 10 ... 30 V AC ≤ 0,1 V
R412022858 0.3 m - ≤ 2,5 V
R412022851 0.3 m - ≤ 2,5 V

Part No. DC switching current, max. AC switching current, max.

R412022868 0.13 A 0.13 A

R412027172 0.13 A 0.13 A
R412022872 0.3 A 0.5 A
R412022858 0.13 A -

PDF creation date: 20.06.2020

Page 122 | AVENTICS

Part No. DC switching current, max. AC switching current, max.

R412022851 0.13 A -

Part No. Switching capacity Max. switching frequency

R412022868 Reed, 2-pin: max. 10 W 400 Hz

R412027172 Reed, 2-pin: max. 10 W 400 Hz
R412022872 Reed, 3-pin: max. 6 W 400 Hz
R412022858 - 1000 Hz
R412022851 - 1000 Hz

Part No. Operating current, not switched Operating current, switched

R412022868 - -
R412027172 - -
R412022872 - -
R412022858 8 mA 30 mA
R412022851 8 mA 30 mA

Part No. Version

R412022868 Protected against polarity reversal 1)

R412027172 Protected against polarity reversal 1)
R412022872 Protected against polarity reversal 1)
R412022858 short circuit resistant Protected against polarity reversal -
R412022851 short circuit resistant Protected against polarity reversal -

1) The product of operating voltage and continuous current must not exceed the maximum switching capacity.

Technical information

Material

Housing Polyamide

Cable sheath Polyurethane

Locking screw Stainless steel

PDF creation date: 20.06.2020

Page 123 | AVENTICS

Dimensions

Dimensions

1* = switching point 2* = locking screw 3* = LED window, transparent

L = cable length
X = electronic: 11,6 mm, Reed: 8,3 mm

PDF creation date: 20.06.2020

Page 124 | AVENTICS

Sensor, Series ST6

- 6 mm T-slot
- with cable
- Plug, M12, 3-pin, with knurled screw
- ATEX
- UL certification, ATEX
- electronic PNP
- Direct mounting for series PRA, PRE, CCI, KPZ, SSI, GPC, CVI
- Indirect mounting for series TRB, ITS, CCL-IS, MNI, CSL-RD, RPC, ICS-D2, ICM, KHZ, TRR

Certificates ATEX CE declaration of conformity cULus

RoHS
ATEX class G II 3G Ex nA IIC T4 Gc X
ATEX class D II 3D Ex tc IIIC T135°C Dc X
Ambient temperature min./max. -20 ... 50 °C
Protection class IP67
Switching point precision ±0,1 mT
Quiescent current (without load) 10 mA
Min./max. DC operating voltage 10 ... 30 V DC
Switching logic NO (make contact)
LED status display Yellow Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 0.3 m

Technical data

Part No. for Type of contact Cable length

L

R412022864 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP 0.3 m

Part No. Voltage drop U at Imax DC switching current, max.

R412022864 ≤ 2,5 V 0.1 A

Part No. Max. switching frequency

R412022864 1000 Hz

Part No. Version

R412022864 short circuit resistant Protected against polarity reversal

PDF creation date: 20.06.2020

Page 125 | AVENTICS

Technical information

Material

Housing Polyamide

Cable sheath Polyurethane

Locking screw Stainless steel

Dimensions

Dimensions

1* = switching point 2* = locking screw 3* = LED window, transparent

L = cable length
X = PNP: 11,6 mm, reed: 8,3 mm

Pin assignments

Pin assignments

Pin 1 3 4

Allocation (+) (-) (OUT)

PDF creation date: 20.06.2020

Page 126 | AVENTICS

Sensor, Series ST6

- 6 mm T-slot
- with cable
- Plug, M12, 2-pin, with knurled screw Plug, M12, 4-pin, with knurled screw
- UL certification
- Reed electronic PNP
- Direct mounting for series PRA, PRE, CCI, KPZ, SSI, GPC, CVI
- Indirect mounting for series TRB, ITS, CCL-IS, MNI, CSL-RD, RPC, ICS-D2, ICM, KHZ, TRR

Certificates CE declaration of conformity cULus RoHS

Ambient temperature min./max. -30 ... 80 °C
Protection class See table below
Switching point precision ±0,1 mT
Nominal current, actuated state 30 mA
Quiescent current (without load) 8 mA
Min./max. DC operating voltage 10 ... 30 V DC
Min./max. AC operating voltage See table below
Hysteresis ≥ 0,2 mT
Switching logic NO (make contact)
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 0.3 0.1 3 5 m

Technical data

Part No. for Type of contact

R412027171 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Reed

R412022876 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Reed
R412022879 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP
R412022863 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP
R412022877 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP
R412022878 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP

Part No. Cable length Min./max. AC operating voltage Voltage drop U at Imax
L

R412027171 0.3 m 10 ... 30 V AC ≤ 3,5 V

R412022876 0.3 m 10 ... 30 V AC ≤ 0,1 V
R412022879 0.1 m - ≤ 2,5 V
R412022863 0.3 m - ≤ 2,5 V
R412022877 3m - ≤ 2,5 V
R412022878 5m - ≤ 2,5 V

Part No. DC switching current, max. AC switching current, max.

R412027171 0.13 A 0.13 A

R412022876 0.3 A 0.5 A

PDF creation date: 20.06.2020

Page 127 | AVENTICS

Part No. DC switching current, max. AC switching current, max.

R412022879 0.13 A -
R412022863 0.13 A -
R412022877 0.13 A -
R412022878 0.13 A -

Part No. Switching capacity Max. switching frequency

R412027171 Reed, 2-pin: max. 10 W 400 Hz

R412022876 Reed, 3-pin: max. 6 W 400 Hz
R412022879 - 1000 Hz
R412022863 - 1000 Hz
R412022877 - 1000 Hz
R412022878 - 1000 Hz

Part No. Operating current, not switched Operating current, switched Protection class

R412027171 - - IP65, IP67

R412022876 - - IP65, IP67
R412022879 8 mA 30 mA IP65, IP67
R412022863 8 mA 30 mA IP65, IP67, IP69K
R412022877 8 mA 30 mA IP65, IP67
R412022878 8 mA 30 mA IP65, IP67

Part No. Version

R412027171 Protected against polarity reversal 1)

R412022876 Protected against polarity reversal 1)
R412022879 short circuit resistant Protected against polarity reversal -
R412022863 short circuit resistant Protected against polarity reversal -
R412022877 short circuit resistant Protected against polarity reversal -
R412022878 short circuit resistant Protected against polarity reversal -

1) The product of operating voltage and continuous current must not exceed the maximum switching capacity.

Technical information

Material

Housing Polyamide

Cable sheath Polyurethane

Locking screw Stainless steel

PDF creation date: 20.06.2020

Page 128 | AVENTICS

Dimensions

Dimensions

1* = switching point 2* = locking screw 3* = LED window, transparent

L = cable length
X = PNP: 11,6 mm, reed: 8,3 mm

PDF creation date: 20.06.2020

Page 129 | AVENTICS

Sensor, Series ST6

- 6 mm T-slot
- with cable
- Plug, M8, 3-pin, with knurled screw
- ATEX
- UL certification, ATEX
- electronic PNP
- Direct mounting for series PRA, PRE, CCI, KPZ, SSI, GPC, CVI
- Indirect mounting for series TRB, ITS, CCL-IS, MNI, CSL-RD, RPC, ICS-D2, ICM, KHZ, TRR

Certificates ATEX CE declaration of conformity cULus

RoHS
ATEX class G II 3G Ex nA IIC T4 Gc X
ATEX class D II 3D Ex tc IIIC T135°C Dc X
Ambient temperature min./max. -20 ... 50 °C
Protection class IP65, IP67
Switching point precision ±0,1 mT
Quiescent current (without load) 10 mA
Min./max. DC operating voltage 10 ... 30 V DC
Switching logic NO (make contact)
LED status display Yellow Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 0.3 m

Technical data

Part No. for Type of contact Cable length

L

R412022860 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP 0.3 m

Part No. Voltage drop U at Imax DC switching current, max.

R412022860 ≤ 2,5 V 0.1 A

Part No. Max. switching frequency

R412022860 1000 Hz

Part No. Version

R412022860 short circuit resistant Protected against polarity reversal

PDF creation date: 20.06.2020

Page 130 | AVENTICS

Technical information

Material

Housing Polyamide

Cable sheath Polyurethane

Locking screw Stainless steel

Dimensions

Dimensions

1* = switching point 2* = locking screw 3* = LED window, transparent

L = cable length
X = electronic: 11,6 mm, Reed: 8,3 mm

Pin assignments

Pin assignments

Pin 1 3 4

Allocation (+) (-) (OUT)

PDF creation date: 20.06.2020

Page 131 | AVENTICS

Sensor, Series ST6

- 6 mm T-slot
- with cable
- Plug, M8, 3-pin, with knurled screw
- UL certification
- Reed electronic PNP electronic NPN
- Direct mounting for series PRA, PRE, CCI, KPZ, SSI, GPC, CVI
- Indirect mounting for series TRB, ITS, CCL-IS, MNI, CSL-RD, RPC, ICS-D2, ICM, KHZ, TRR

Certificates CE declaration of conformity cULus RoHS

Ambient temperature min./max. -30 ... 80 °C
Protection class IP65, IP67
Switching point precision ±0,1 mT
Nominal current, actuated state 30 mA
Quiescent current (without load) 8 mA
Min./max. DC operating voltage 10 ... 30 V DC
Min./max. AC operating voltage See table below
Hysteresis ≥ 0,2 mT
Switching logic NO (make contact)
Switching capacity Reed, 3-pin: max. 6 W
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 0.3 0.5 m

Technical data

Part No. for Type of contact

R412022873 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Reed

R412022875 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Reed
R412022874 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Reed
R412022859 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP
R412022862 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP
R412022861 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic PNP
R412022852 PRA, PRE, CCI, KPZ, SSI, GPC, CVI electronic NPN

Part No. Cable sheath Cable length Min./max. AC operating voltage

L

R412022873 Polyurethane 0.3 m 10 ... 30 V AC

R412022875 Polyvinyl chloride 0.3 m 10 ... 30 V AC
R412022874 Polyurethane 0.5 m 10 ... 30 V AC
R412022859 Polyurethane 0.3 m -
R412022862 Polyvinyl chloride 0.3 m -
R412022861 Polyurethane 0.5 m -
R412022852 Polyurethane 0.3 m -

PDF creation date: 20.06.2020

Page 132 | AVENTICS

Part No. Voltage drop U at Imax DC switching current, max.

R412022873 I*Rs 0.3 A

R412022875 I*Rs 0.3 A
R412022874 I*Rs 0.3 A
R412022859 ≤ 2,5 V 0.13 A
R412022862 ≤ 2,5 V 0.13 A
R412022861 ≤ 2,5 V 0.13 A
R412022852 ≤ 2,5 V 0.13 A

Part No. AC switching current, max. Max. switching frequency

R412022873 0.5 A 400 Hz

R412022875 0.5 A 400 Hz
R412022874 0.5 A 400 Hz
R412022859 - 1000 Hz
R412022862 - 1000 Hz
R412022861 - 1000 Hz
R412022852 - 1000 Hz

Part No. Operating current, not switched Operating current, switched

R412022873 - -
R412022875 - -
R412022874 - -
R412022859 8 mA 30 mA
R412022862 8 mA 30 mA
R412022861 8 mA 30 mA
R412022852 8 mA 30 mA

Part No. Version

R412022873 Protected against polarity reversal

R412022875 Protected against polarity reversal
R412022874 Protected against polarity reversal
R412022859 short circuit resistant Protected against polarity reversal
R412022862 short circuit resistant Protected against polarity reversal
R412022861 short circuit resistant Protected against polarity reversal
R412022852 short circuit resistant Protected against polarity reversal

Technical information

Material

Housing Polyamide

Cable sheath Polyurethane Polyvinyl chloride

Locking screw Stainless steel

PDF creation date: 20.06.2020

Page 133 | AVENTICS

Dimensions

Dimensions

1* = switching point 2* = locking screw 3* = LED window, transparent

L = cable length
X = electronic: 11,6 mm, Reed: 8,3 mm

Pin assignments

Pin assignments

Pin 1 3 4

Allocation (+) (-) (OUT)

PDF creation date: 20.06.2020

Page 134 | AVENTICS

Sensors, Series SM6

- 6 mm groove
- with cable
- without wire end ferrule, tin-plated, 4-pin
- with distance measuring sensor, measurement range 32 ... 256 mm
- Analog
- Direct mounting for series PRA, PRE, CCI, KPZ, SSI, GPC, CVI
- Indirect mounting for series TRB, ITS, 167, MNI, ICM, TRR

Certificates cULus
Ambient temperature min./max. -20 ... 70 °C
Protection class IP67
Output signal 0 - 10 V DC, 4 - 20 mA
Quiescent current (without load) 25 mA
Maximum load (analog current output) 500 Ω
Residual ripple ≤ 10 %
sampling interval 1 ms
Resolution max. measuring range 0,05 mm
Repetitive precision max. measuring 0.1 mm
range
Linearity deviation 0,3 mm
Sampling speed 3 m/s
Display LED
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 2m

Technical data

Part No. for Type of contact Cable length

L

R412010141 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m

R412010143 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m
R412010262 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m
R412010264 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m
R412010411 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m
R412010413 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m
R412010415 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m
R412010417 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m

Part No. max. measuring range Overall length

Sensor
A
R412010141 32 mm 45 mm
R412010143 64 mm 77 mm
R412010262 96 mm 109 mm
R412010264 128 mm 141 mm
R412010411 160 mm 173 mm
R412010413 192 mm 205 mm

PDF creation date: 20.06.2020

Page 135 | AVENTICS

Part No. max. measuring range Overall length

Sensor
A
R412010415 224 mm 237 mm
R412010417 256 mm 269 mm

Part No. Version

R412010141 short circuit resistant Protected against polarity reversal Overload protection
R412010143 short circuit resistant Protected against polarity reversal Overload protection
R412010262 short circuit resistant Protected against polarity reversal Overload protection
R412010264 short circuit resistant Protected against polarity reversal Overload protection
R412010411 short circuit resistant Protected against polarity reversal Overload protection
R412010413 short circuit resistant Protected against polarity reversal Overload protection
R412010415 short circuit resistant Protected against polarity reversal Overload protection
R412010417 short circuit resistant Protected against polarity reversal Overload protection

Technical information

Material

Housing Polyamide fiber-glass reinforced

Cable sheath Polyurethane

Dimensions

Dimensions

1* = LED 2* = teach button 3* = threaded pin M3x11

L = cable length
(1) BN=brown
(2) WH=white
(3) BU=blue

PDF creation date: 20.06.2020

Page 136 | AVENTICS

(4) BK=black
A = sensor length

PDF creation date: 20.06.2020

Page 137 | AVENTICS

Sensors, Series SM6

- 6 mm groove
- with cable
- without wire end ferrule, tin-plated, 4-pin
- with distance measuring sensor, measurement range 32 ... 256 mm
- Analog
- Direct mounting for series PRA, PRE, CCI, KPZ, SSI, GPC, CVI
- Indirect mounting for series TRB, ITS, 167, MNI, ICM, TRR

Certificates cULus
Ambient temperature min./max. -20 ... 70 °C
Protection class IP67
Output signal 0 - 10 V DC, 4 - 20 mA
Quiescent current (without load) 25 mA
Maximum load (analog current output) 500 Ω
Residual ripple ≤ 10 %
sampling interval 1 ms
Resolution max. measuring range 0,05 mm
Repetitive precision max. measuring 0.1 mm
range
Linearity deviation 0,3 mm
Sampling speed 3 m/s
Display LED
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 2m

Technical data

Part No. for Type of contact Cable length

L

R412010141 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m

R412010143 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m
R412010262 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m
R412010264 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m
R412010411 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m
R412010413 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m
R412010415 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m
R412010417 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 2m

Part No. max. measuring range Overall length

Sensor
A
R412010141 32 mm 45 mm
R412010143 64 mm 77 mm
R412010262 96 mm 109 mm
R412010264 128 mm 141 mm
R412010411 160 mm 173 mm
R412010413 192 mm 205 mm

PDF creation date: 20.06.2020

Page 138 | AVENTICS

Part No. max. measuring range Overall length

Sensor
A
R412010415 224 mm 237 mm
R412010417 256 mm 269 mm

Part No. Version

R412010141 short circuit resistant Protected against polarity reversal Overload protection
R412010143 short circuit resistant Protected against polarity reversal Overload protection
R412010262 short circuit resistant Protected against polarity reversal Overload protection
R412010264 short circuit resistant Protected against polarity reversal Overload protection
R412010411 short circuit resistant Protected against polarity reversal Overload protection
R412010413 short circuit resistant Protected against polarity reversal Overload protection
R412010415 short circuit resistant Protected against polarity reversal Overload protection
R412010417 short circuit resistant Protected against polarity reversal Overload protection

Technical information

Material

Housing Polyamide fiber-glass reinforced

Cable sheath Polyurethane

Dimensions

Dimensions

1* = LED 2* = teach button 3* = threaded pin M3x11

L = cable length
(1) BN=brown
(2) WH=white
(3) BU=blue

PDF creation date: 20.06.2020

Page 139 | AVENTICS

(4) BK=black
A = sensor length

PDF creation date: 20.06.2020

Page 140 | AVENTICS

Sensors, Series SM6

- 6 mm groove
- with cable
- Plug, M8x1, 4-pin, with knurled screw
- with distance measuring sensor, measurement range 32 ... 256 mm
- Analog
- Direct mounting for series PRA, PRE, CCI, KPZ, SSI, GPC, CVI
- Indirect mounting for series TRB, ITS, 167, MNI, ICM, TRR

Certificates cULus
Ambient temperature min./max. -20 ... 70 °C
Protection class IP67
Output signal 0 - 10 V DC, 4 - 20 mA
Quiescent current (without load) 25 mA
Min./max. DC operating voltage 15 ... 30 V DC
sampling interval 1 ms
Resolution max. measuring range 0,05 mm
Repetitive precision max. measuring 0.1 mm
range
Linearity deviation 0,3 mm
Sampling speed 3 m/s
Display LED
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 0.3 m

Technical data

Part No. for Type of contact Cable length

L

R412010142 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m
R412010144 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m
R412010263 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m
R412010265 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m
R412010410 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m
R412010412 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m
R412010414 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m
R412010416 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m

Part No. max. measuring range Overall length

Sensor
A
R412010142 32 mm 45 mm
R412010144 64 mm 77 mm
R412010263 96 mm 109 mm
R412010265 128 mm 141 mm
R412010410 160 mm 173 mm
R412010412 192 mm 205 mm

PDF creation date: 20.06.2020

Page 141 | AVENTICS

Part No. max. measuring range Overall length

Sensor
A
R412010414 224 mm 237 mm
R412010416 256 mm 269 mm

Part No. Version

R412010142 short circuit resistant Protected against polarity reversal Overload protection
R412010144 short circuit resistant Protected against polarity reversal Overload protection
R412010263 short circuit resistant Protected against polarity reversal Overload protection
R412010265 short circuit resistant Protected against polarity reversal Overload protection
R412010410 short circuit resistant Protected against polarity reversal Overload protection
R412010412 short circuit resistant Protected against polarity reversal Overload protection
R412010414 short circuit resistant Protected against polarity reversal Overload protection
R412010416 short circuit resistant Protected against polarity reversal Overload protection

Technical information

Material

Housing Polyamide fiber-glass reinforced

Cable sheath Polyurethane

Dimensions

Dimensions

1* = LED 2* = teach button 3* = threaded pin M3x11

L = cable length
Pin assignment: 1 = (+), 2 = (OUT 1) 3 = (GND), 4 = (OUT 2), EN 60947-5-7
A = sensor length

PDF creation date: 20.06.2020

Page 142 | AVENTICS

Sensors, Series SM6

- 6 mm groove
- with cable
- Plug, M8x1, 4-pin, with knurled screw
- with distance measuring sensor, measurement range 32 ... 256 mm
- Analog
- Direct mounting for series PRA, PRE, CCI, KPZ, SSI, GPC, CVI
- Indirect mounting for series TRB, ITS, 167, MNI, ICM, TRR

Certificates cULus
Ambient temperature min./max. -20 ... 70 °C
Protection class IP67
Output signal 0 - 10 V DC, 4 - 20 mA
Quiescent current (without load) 25 mA
Min./max. DC operating voltage 15 ... 30 V DC
sampling interval 1 ms
Resolution max. measuring range 0,05 mm
Repetitive precision max. measuring 0.1 mm
range
Linearity deviation 0,3 mm
Sampling speed 3 m/s
Display LED
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 0.3 m

Technical data

Part No. for Type of contact Cable length

L

R412010142 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m
R412010144 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m
R412010263 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m
R412010265 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m
R412010410 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m
R412010412 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m
R412010414 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m
R412010416 PRA, PRE, CCI, KPZ, SSI, GPC, CVI Analog 0.3 m

Part No. max. measuring range Overall length

Sensor
A
R412010142 32 mm 45 mm
R412010144 64 mm 77 mm
R412010263 96 mm 109 mm
R412010265 128 mm 141 mm
R412010410 160 mm 173 mm
R412010412 192 mm 205 mm

PDF creation date: 20.06.2020

Page 143 | AVENTICS

Part No. max. measuring range Overall length

Sensor
A
R412010414 224 mm 237 mm
R412010416 256 mm 269 mm

Part No. Version

R412010142 short circuit resistant Protected against polarity reversal Overload protection
R412010144 short circuit resistant Protected against polarity reversal Overload protection
R412010263 short circuit resistant Protected against polarity reversal Overload protection
R412010265 short circuit resistant Protected against polarity reversal Overload protection
R412010410 short circuit resistant Protected against polarity reversal Overload protection
R412010412 short circuit resistant Protected against polarity reversal Overload protection
R412010414 short circuit resistant Protected against polarity reversal Overload protection
R412010416 short circuit resistant Protected against polarity reversal Overload protection

Technical information

Material

Housing Polyamide fiber-glass reinforced

Cable sheath Polyurethane

Dimensions

Dimensions

1* = LED 2* = teach button 3* = threaded pin M3x11

L = cable length
Pin assignment: 1 = (+), 2 = (OUT 1) 3 = (GND), 4 = (OUT 2), EN 60947-5-7
A = sensor length

PDF creation date: 20.06.2020

Page 144 | AVENTICS

Sensor, Series SN2

- with cable
- without wire end ferrule, tin-plated, 2-pin without wire end ferrule, tin-plated, 3-pin
- Heat resistant
- Reed electronic PNP
- Indirect mounting for series TRB, PRA, ITS, MNI, CSL-RD, ICM, RPC, TRR, FLT, CVI

Ambient temperature min./max. See table below

Protection class IP67
Switching point precision ±0,1 mT
Nominal current, actuated state 15 mA
Quiescent current (without load) 10 mA
Min./max. DC operating voltage See table below
Min./max. AC operating voltage See table below
LED status display See table below
Cable length L 3 5 7 10 11 20 m

PDF creation date: 20.06.2020

Page 145 | AVENTICS

Technical data

Part No. Type of contact Cable sheath Cable length

L

0830100315 Reed Polyvinyl chloride 3m

0830100365 Reed Polyvinyl chloride 3m
0830100368 Reed Polyvinyl chloride 3m
0830100370 Reed Polyurethane 3m
0830100316 Reed - 3m
0830100373 Reed - 3m
0830100367 Reed Polyurethane 3m
0830100317 Reed Thermoplastic elastomer 3m
0830100366 Reed Polyvinyl chloride 5m
0830100369 Reed Polyvinyl chloride 5m
0830100327 Reed Polyvinyl chloride 7m
0830100325 Reed Polyvinyl chloride 10 m
0830100326 Reed Thermoplastic elastomer 11 m
R412004848 Reed Polyvinyl chloride 20 m
0830100371 Reed Polyvinyl chloride 3m
0830100372 Reed Polyvinyl chloride 5m
0830100375 electronic PNP Polyvinyl chloride 3m
0830100378 electronic PNP Thermoplastic elastomer 3m
0830100377 electronic PNP Polyurethane 3m
0830100376 electronic PNP Polyvinyl chloride 5m

Part No. Min./max. DC operating voltage Min./max. AC operating voltage

0830100315 0 ... 60 V DC 0 ... 240 V AC

0830100365 12 ... 60 V DC 12 ... 240 V AC
0830100368 12 ... 60 V DC 12 ... 240 V AC
0830100370 12 ... 60 V DC 12 ... 240 V AC
0830100316 0 ... 60 V DC 0 ... 240 V AC
0830100373 0 ... 60 V DC 0 ... 240 V AC
0830100367 12 ... 60 V DC 12 ... 240 V AC
0830100317 12 ... 60 V DC 12 ... 240 V AC
0830100366 12 ... 60 V DC 12 ... 240 V AC
0830100369 12 ... 60 V DC 12 ... 240 V AC
0830100327 12 ... 60 V DC 12 ... 240 V AC
0830100325 12 ... 60 V DC 12 ... 240 V AC
0830100326 12 ... 60 V DC 12 ... 240 V AC
R412004848 12 ... 60 V DC 12 ... 240 V AC
0830100371 12 ... 42 V DC 12 ... 42 V AC
0830100372 12 ... 42 V DC 12 ... 42 V AC
0830100375 10 ... 30 V DC 10 ... 30 V AC
0830100378 10 ... 30 V DC -
0830100377 10 ... 30 V DC 10 ... 30 V AC
0830100376 10 ... 30 V DC 10 ... 30 V AC

PDF creation date: 20.06.2020

Page 146 | AVENTICS

Part No. Voltage drop U at Imax DC switching current, max.

0830100315 Rs*Imax. 0.13 A

0830100365 2,1 V + I*Rs 0.13 A
0830100368 2,1 V + I*Rs 0.3 A
0830100370 2,1 V + I*Rs 0.3 A
0830100316 Rs*Imax. 0.13 A
0830100373 Rs*Imax. 0.13 A
0830100367 2,1 V + I*Rs 0.13 A
0830100317 2,1 V + I*Rs 0.12 A
0830100366 2,1 V + I*Rs 0.13 A
0830100369 2,1 V + I*Rs 0.3 A
0830100327 2,1 V + I*Rs 0.3 A
0830100325 2,1 V + I*Rs 0.13 A
0830100326 2,1 V + I*Rs 0.12 A
R412004848 2,1 V + I*Rs 0.13 A
0830100371 I*Rs 0.13 A
0830100372 I*Rs 0.13 A
0830100375 ≤ 2,0 V 0.13 A
0830100378 2,1 V + I*Rs 0.12 A
0830100377 ≤ 2,0 V 0.13 A
0830100376 ≤ 2,0 V 0.13 A

Part No. AC switching current, max. Ambient temperature min./max. Switching capacity

0830100315 0.13 A -20 ... 80 °C 10 W / 10 VA

0830100365 0.13 A -20 ... 80 °C 10 W / 10 VA
0830100368 0.5 A -20 ... 80 °C 10 W / 10 VA
0830100370 0.5 A -20 ... 80 °C 10 W / 10 VA
0830100316 - -20 ... 80 °C 10 W / 10 VA
0830100373 - -20 ... 80 °C 10 W / 10 VA
0830100367 0.13 A -20 ... 80 °C 10 W / 10 VA
0830100317 0.12 A -20 ... 120 °C 10 W / 10 VA
0830100366 0.13 A -20 ... 80 °C 10 W / 10 VA
0830100369 0.5 A -20 ... 80 °C 10 W / 10 VA
0830100327 0.5 A -20 ... 80 °C 10 W / 10 VA
0830100325 0.13 A -20 ... 80 °C 10 W / 10 VA
0830100326 0.12 A -20 ... 120 °C 10 W / 10 VA
R412004848 0.13 A -20 ... 80 °C 10 W / 10 VA
0830100371 0.13 A -20 ... 80 °C 5,5 W / 5,5 VA
0830100372 0.13 A -20 ... 80 °C 5,5 W / 5,5 VA
0830100375 - -10 ... 70 °C -
0830100378 - -20 ... 120 °C 10 W / 10 VA
0830100377 - -10 ... 70 °C -
0830100376 - -10 ... 70 °C -

Part No. Protective resistor for reed Vibration resistance Shock resistance

0830100315 27 Ω - -

PDF creation date: 20.06.2020

Page 147 | AVENTICS

Part No. Protective resistor for reed Vibration resistance Shock resistance

0830100365 27 Ω 30 g (50 - 1000 Hz) 50 g / 11 ms

0830100368 1,3 Ω 30 g (50 - 1000 Hz) 50 g / 11 ms
0830100370 1,3 Ω 30 g (50 - 1000 Hz) 50 g / 11 ms
0830100316 1,3 Ω - -
0830100373 100 Ω - -
0830100367 27 Ω 30 g (50 - 1000 Hz) 50 g / 11 ms
0830100317 27 Ω 30 g (50 - 1000 Hz) 100 g / 11 ms
0830100366 27 Ω 30 g (50 - 1000 Hz) 50 g / 11 ms
0830100369 1,3 Ω 30 g (50 - 1000 Hz) 50 g / 11 ms
0830100327 1,3 Ω 30 g (50 - 1000 Hz) 50 g / 11 ms
0830100325 27 Ω 30 g (50 - 1000 Hz) 50 g / 11 ms
0830100326 27 Ω 30 g (50 - 1000 Hz) 100 g / 11 ms
R412004848 27 Ω 30 g (50 - 1000 Hz) 50 g / 11 ms
0830100371 27 Ω 30 g (50 - 1000 Hz) 100 g / 11 ms
0830100372 27 Ω 30 g (50 - 1000 Hz) 100 g / 11 ms
0830100375 - - -
0830100378 27 Ω 30 g (50 - 1000 Hz) 100 g / 11 ms
0830100377 - - -
0830100376 - - -

Part No. Max. switching frequency Operating current, not switched

0830100315 300 Hz -
0830100365 - -
0830100368 - -
0830100370 - -
0830100316 300 Hz -
0830100373 300 Hz -
0830100367 - -
0830100317 - -
0830100366 - -
0830100369 - -
0830100327 - -
0830100325 - -
0830100326 - -
R412004848 - -
0830100371 - -
0830100372 - -
0830100375 2000 Hz 10 mA
0830100378 - -
0830100377 2000 Hz 10 mA
0830100376 2000 Hz 10 mA

Part No. Operating current, switched Material LED status display

Housing

0830100315 - Polyamide -
0830100365 - Polyamide Yellow

PDF creation date: 20.06.2020

Page 148 | AVENTICS

Part No. Operating current, switched Material LED status display

Housing

0830100368 - Polyamide Yellow

0830100370 - Polyamide Yellow
0830100316 - Polyamide -
0830100373 - Polyamide -
0830100367 - Polyamide Yellow
0830100317 - Polyamide -
0830100366 - Polyamide Yellow
0830100369 - Polyamide Yellow
0830100327 - Polyamide Yellow
0830100325 - Polyamide Yellow
0830100326 - Polyamide -
R412004848 - epoxy resin Yellow
0830100371 - Polyamide Yellow
0830100372 - Polyamide Yellow
0830100375 15 mA Polyamide Yellow
0830100378 - Polyamide -
0830100377 15 mA Polyamide Yellow
0830100376 15 mA Polyamide Yellow

Part No. Version

0830100315 Protected against polarity reversal 1)

0830100365 Protected against polarity reversal 1)
0830100368 Protected against polarity reversal 1)
0830100370 Protected against polarity reversal 1)
0830100316 Protected against polarity reversal 1)
0830100373 Protected against polarity reversal 1)
0830100367 Protected against polarity reversal 1)
0830100317 Protected against polarity reversal 1)
0830100366 Protected against polarity reversal 1)
0830100369 Protected against polarity reversal 1)
0830100327 Protected against polarity reversal 1)
0830100325 Protected against polarity reversal 1)
0830100326 Protected against polarity reversal 1)
R412004848 Protected against polarity reversal 1)
0830100371 Protected against polarity reversal 1)
0830100372 Protected against polarity reversal 1)
0830100375 short circuit resistant Protected against polarity reversal 2)
0830100378 Protected against polarity reversal 2)
0830100377 short circuit resistant Protected against polarity reversal 2)
0830100376 short circuit resistant Protected against polarity reversal 2)

1) without wire end ferrule, tin-plated, 2-pin

2) without wire end ferrule, tin-plated, 3-pin

PDF creation date: 20.06.2020

Page 149 | AVENTICS

Technical information

If reed sensors are used, we recommend using a short-circuit protective device (SCPD).

Technical information

Material

Housing Polyamide epoxy resin

Cable sheath Polyvinyl chloride Polyurethane Thermoplastic elastomer

Dimensions

Dimensions

1) LED
L = cable length
BN = brown, BK = black, BU = blue

PDF creation date: 20.06.2020

Page 150 | AVENTICS

Sensor, Series SN2

- Plug, M8, 2-pin Plug, M8, 3-pin Plug, M8, 4-pin
- Reed 2-Wire Reed 3-Wire Reed 3-Wire, with pulse stretching Reed 4-Wire electronic PNP
- With stretched impulse
- With stretched impulse
- Reed electronic PNP
- Indirect mounting for series TRB, PRA, ITS, MNI, CSL-RD, ICM, RPC, TRR, FLT, CVI

Ambient temperature min./max. See table below

Protection class IP67
Switching point precision ±0,1 mT
Nominal current, actuated state 15 mA
Quiescent current (without load) 10 mA
Min./max. DC operating voltage See table below
Min./max. AC operating voltage See table below
LED status display See table below

PDF creation date: 20.06.2020

Page 151 | AVENTICS

Technical data

Part No. Type of contact Min./max. DC operating voltage

0830100465 Reed 12 ... 36 V DC

0830100468 Reed 12 ... 36 V DC
R412004299 Reed 12 ... 36 V DC
0830100466 Reed 12 ... 36 V DC
0830100469 Reed 12 ... 36 V DC
R412004820 Reed 12 ... 36 V DC
0830100472 Reed 12 ... 36 V DC
0830100467 Reed 12 ... 36 V DC
0830100480 electronic PNP 10 ... 30 V DC
R412004800 electronic PNP 10 ... 30 V DC

Part No. Min./max. AC operating voltage Voltage drop U at Imax

0830100465 12 ... 30 V AC 2,1 V + I*Rs

0830100468 12 ... 30 V AC 2,1 V + I*Rs
R412004299 12 ... 30 V AC 2,1 V + I*Rs
0830100466 12 ... 30 V AC 2,1 V + I*Rs
0830100469 12 ... 30 V AC ≤ 0,5 V
R412004820 12 ... 30 V AC I*Rs
0830100472 12 ... 30 V AC ≤ 1,5 V
0830100467 12 ... 30 V AC ≤ 3,5 V
0830100480 12 ... 30 V AC ≤ 2,0 V
R412004800 - ≤ 2,0 V

Part No. DC switching current, max. AC switching current, max.

0830100465 0.13 A 0.13 A

0830100468 0.3 A 0.5 A
R412004299 0.13 A 0.13 A
0830100466 0.13 A 0.13 A
0830100469 0.13 A 0.13 A
R412004820 0.13 A 0.13 A
0830100472 0.2 A 0.13 A
0830100467 0.13 A 0.13 A
0830100480 0.13 A -
R412004800 0.13 A -

Part No. Function Ambient temperature min./max.

0830100465 Reed 2-Wire -20 ... 80 °C

0830100468 Reed 2-Wire -20 ... 80 °C
R412004299 Reed 3-Wire -20 ... 80 °C
0830100466 Reed 3-Wire -20 ... 80 °C
0830100469 Reed 3-Wire -20 ... 80 °C

PDF creation date: 20.06.2020

Page 152 | AVENTICS

Part No. Function Ambient temperature min./max.

R412004820 Reed 3-Wire -20 ... 80 °C

0830100472 Reed 3-Wire, with pulse stretching -20 ... 70 °C
0830100467 Reed 4-Wire -20 ... 80 °C
0830100480 electronic PNP -10 ... 70 °C
R412004800 electronic PNP -10 ... 70 °C

Part No. Switching capacity Protective resistor for reed Vibration resistance

0830100465 10 W / 10 VA 27 Ω 30 g (50 - 2000 Hz)

0830100468 10 W / 10 VA 1,3 Ω 30 g (50 - 2000 Hz)
R412004299 10 W / 10 VA 27 Ω 30 g (50 - 2000 Hz)
0830100466 10 W / 10 VA 100 Ω 30 g (50 - 2000 Hz)
0830100469 5,5 W / 5,5 VA 27 Ω 30 g (50 - 1000 Hz)
R412004820 10 W / 10 VA 27 Ω 30 g (50 - 2000 Hz)
0830100472 5 W / 5 VA - 35 g (50 - 2000 Hz)
0830100467 10 W / 10 VA 27 Ω 35 g (50 - 2000 Hz)
0830100480 - - -
R412004800 - - -

Part No. Shock resistance Max. switching frequency Operating current, not switched

0830100465 100 g / 11 ms - -
0830100468 100 g / 11 ms - -
R412004299 100 g / 11 ms - -
0830100466 100 g / 11 ms - -
0830100469 100 g / 11 ms - -
R412004820 100 g / 11 ms - -
0830100472 50 g / 11 ms - -
0830100467 50 g / 11 ms - -
0830100480 - 2000 Hz 10 mA
R412004800 - 2000 Hz 10 mA

Part No. Operating current, switched Material LED status display

Housing

0830100465 - Polyamide Yellow

0830100468 - Polyamide Yellow
R412004299 - Polyamide Yellow
0830100466 - Polyamide Yellow
0830100469 - Polyamide Yellow
R412004820 - epoxy resin Yellow
0830100472 - - Red
0830100467 - epoxy resin Red
0830100480 15 mA Polyamide Yellow
R412004800 15 mA epoxy resin Yellow

PDF creation date: 20.06.2020

Page 153 | AVENTICS

Part No. Version

0830100465 Protected against polarity reversal

0830100468 Protected against polarity reversal
R412004299 Protected against polarity reversal
0830100466 Protected against polarity reversal
0830100469 Protected against polarity reversal
R412004820 Protected against polarity reversal
0830100472 Protected against polarity reversal
0830100467 Protected against polarity reversal
0830100480 short circuit resistant Protected against polarity reversal
R412004800 short circuit resistant Protected against polarity reversal

Part No. Switch signal Fig.

0830100465 - Fig. 1 1)
0830100468 - Fig. 1 1)
R412004299 - Fig. 1 2)
0830100466 - Fig. 1 1)
0830100469 - Fig. 1 2)
R412004820 - Fig. 1 2)
0830100472 With stretched impulse Fig. 1 2)
0830100467 - Fig. 2 3)
0830100480 - Fig. 1 2)
R412004800 - Fig. 1 2)

1) Plug M8, 2-pin

2) Plug M8, 3-pin
3) Plug M8, 4-pin

Technical information

If reed sensors are used, we recommend using a short-circuit protective device (SCPD).

Technical information

Material

Housing Polyamide epoxy resin

PDF creation date: 20.06.2020

Page 154 | AVENTICS

Dimensions

Fig. 1

1) LED
M8: combination plug can be combined with valve plug connectors Ø6.5 mm and M8.
Pin assignments: 1 = (+), 3 = (-), 4 = (OUT), EN 60947-5-2:1998

PDF creation date: 20.06.2020

Page 155 | AVENTICS

Fig. 2
Dimensions

1) LED
M8: combination plug can be combined with valve plug connectors Ø6.5 mm and M8.

Pin assignments

Pin 1 3 4

Allocation (+) (-) (OUT)

EN 60947-5-2:1998

PDF creation date: 20.06.2020

Page 156 | AVENTICS

Pin assignments

Pin assignments

Pin 1 3 4

Allocation (+) (-) (OUT)

PDF creation date: 20.06.2020

Page 157 | AVENTICS

Sensor, Series ST6-HT

- 6 mm T-slot
- with cable
- open cable ends, 2-pin
- Heat resistant
- UL certification
- Reed
- Direct mounting for series PRA, PRE, CCI, KPZ
- Indirect mounting for series TRB, ITS, CCL-IS, MNI, CSL-RD, RPC

Certificates CE declaration of conformity RoHS

Ambient temperature min./max. -20 ... 120 °C
Protection class IP65, IP67
Switching point precision ±0,1 mT
Min./max. DC operating voltage 0 ... 30 V DC
Min./max. AC operating voltage 0 ... 30 V AC
Switching logic NO (make contact)
Switching capacity Reed, 2-pin: max. 10 W
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
Cable length L 3 10 m

Technical data

Part No. for Type of contact Cable length Voltage drop U at Imax
L

R412022865 PRA, PRE, CCI, KPZ Reed 3m ≤ 3,5 V

R412022867 PRA, PRE, CCI, KPZ Reed 10 m ≤ 3,5 V

Part No. DC switching current, max. AC switching current, max.

R412022865 0.13 A 0.13 A

R412022867 0.13 A 0.13 A

Part No. Max. switching frequency Version

R412022865 400 Hz Protected against polarity reversal

R412022867 400 Hz Protected against polarity reversal

Part No. Temperature resistance

R412022865 Heat resistant

PDF creation date: 20.06.2020

Page 158 | AVENTICS

Part No. Temperature resistance

R412022867 Heat resistant

Technical information

Material

Housing Polyamide

Cable sheath Polyurethane

Locking screw Stainless steel

Dimensions

Dimensions

1* = switching point 2* = locking screw

L = cable length
BN=brown, BU=blue

PDF creation date: 20.06.2020

Page 159 | AVENTICS

Pneumatic sensor, Series SP1

- Qn 40 l/min
- Mounting orientation Any

Mounting orientation Any

Working pressure min./max. 2 ... 6 bar
Ambient temperature min./max. -15 ... 60 °C
Medium Compressed air
Max. particle size 40 µm
Switching point precision ±0,2 mT
Switching time on 12 ms
Switching time off 25 ms
Weight 0.015 kg

Technical data

Part No.

0820212201

Technical information

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in
the MediaCentre).
Notice: This product may only be operated with oil-free, dry compressed air.

Technical information

Material

Housing Polyamide

PDF creation date: 20.06.2020

Page 160 | AVENTICS

Dimensions

1) compressed air connection 2) output line 3) exhaust 4) visual indicator

PDF creation date: 20.06.2020

Page 161 | AVENTICS

Series CAT
- Measuring instrument for adjusting the pneumatic cushioning
- for MNI, CSL-RD, CCL-IS, ICS, RPC, PRA/TRB, ITS

Certificates CE declaration of conformity

Ambient temperature min./max. 0 ... 40 °C
Measurement range Min. 0.2 m/s
Measurement range Max. 2 m/s
LED status display Green Yellow Red
Protection class IP50
Weight 0.12 kg

Technical data

Part No. for series

R412026160 MNI, CSL-RD, CCL-IS, ICS, RPC, PRA/TRB, ITS

Scope of delivery:
 1 measuring instrument
, 2 fastening strips
, 1 power pack 3.7 V
, 1 USB charging cable, 
Operating instructions, 
QR
code notice, 
1 case with foam inlay

Technical information

The CAT measuring instrument uses Bluetooth radio technology for wireless connection with the "Aventics" app, which is available
free of charge in the Android/Play Store and/or the IOS/App Store.

Technical information

Material

Housing Luran S

PDF creation date: 20.06.2020

Page 162 | AVENTICS

Dimensions

Dimensions

PDF creation date: 20.06.2020

Page 163 | AVENTICS

Sensor mounting, Series CB1

- for series ST4, ST6
- to mount on cylinder MNI, ICM, CSL-RD

Ambient temperature min./max. -30 ... 80 °C

Weight 0.007 kg

Technical data

Part No. Cylinders Ø for series Scope of delivery

min.
R412021791 16 mm ST4, ST6 1 piece
R412021792 20 mm ST4, ST6 1 piece
R412021793 25 mm ST4, ST6 1 piece

Technical information

Material

Polyamide Stainless steel

PDF creation date: 20.06.2020

Page 164 | AVENTICS

Dimensions

1) Sensor slot for ST6 2) Sensor slot for ST4 3) Mounting screw (made of stainless steel) 4) Cylinder profile 5) Thread insert (made of
stainless steel) 6) Tightening strap

Dimensions

Part No. A B C D

R412021791 27.7 32.5 22.1 17.3

R412021792 32.4 35 22.4 19.7
R412021793 37.4 39.5 24.3 22.2

PDF creation date: 20.06.2020

Page 165 | AVENTICS

Sensor mounting, Series CB1

- for series SN1, SN2
- to mount on cylinder MNI

Weight See table below

Technical data

Part No. Cylinders Ø Cylinders Ø for series Weight

min. max.
1827020065 10 mm 10 mm SN1, SN2 0.016 kg
1827020066 12 mm 12 mm SN1, SN2 0.018 kg
1827020067 16 mm 16 mm SN1, SN2 0.02 kg
1827020068 20 mm 20 mm SN1, SN2 0.021 kg
1827020069 25 mm 25 mm SN1, SN2 0.025 kg

Technical information

Material

Aluminum

PDF creation date: 20.06.2020

Page 166 | AVENTICS

Dimensions

1) Clamping screw 2) Mounting screw for sensor 3) Sensor 4) Cylinder profile 5) Insert (on request)

Dimensions

Part No. Cylinders Ø mm A B C D E F G H 1) MA1 [Nm]

1827020065 10 mm 16 16 23.5 8.2 18.7 3.5 10 10.7 M4x14 1 +0,3

1827020066 12 mm 16 20 25.5 8.2 19.9 3.5 10 10.7 M4x14 1 +0,3
1827020067 16 mm 20 24 29.7 8.7 21.9 3.5 10 10.7 M4x25 1 +0,3
1827020068 20 mm 20 28 33 8.7 24.1 3.5 10 10.7 M4x25 1 +0,3
1827020069 25 mm 24 35 37.5 8.7 26.6 3.5 10 10.7 M4x25 1 +0,3

PDF creation date: 20.06.2020

Page 167 | AVENTICS

Sensor mounting, Series CB1

- for series ST6, SM6
- to mount on cylinder MNI, ICM

Weight See table below

Technical data

Part No. Cylinders Ø for series Weight

min.
1827020296 10 mm ST6, SM6 0.009 kg
1827020297 12 mm ST6, SM6 0.01 kg
1827020298 16 mm ST6, SM6 0.014 kg
1827020299 20 mm ST6, SM6 0.014 kg
1827020300 25 mm ST6, SM6 0.015 kg

Technical information

Material

Aluminum

PDF creation date: 20.06.2020

Page 168 | AVENTICS

Dimensions

1) Mounting screw 2) Mounting screw for sensor 3) Sensor 4) Cylinder pipe

Dimensions

Part No. A B C D E F G 1) MA1 [Nm]

1827020296 20 8 24 19 17.5 11.8 3 M3x8 1 +0,2

1827020297 20 8 26 22 19 11.8 3 M3x8 1 +0,2
1827020298 20 12 34 30 23 13.8 4 M4x10 2 +0,3
1827020299 20 12 38 32 26 13.8 4 M4x10 2 +0,3
1827020300 20 12 43 37 31 13.8 4 M4x10 2 +0,3

PDF creation date: 20.06.2020

Page 169 | AVENTICS

Round plug connector, Series CON-RD

- Socket, M8x1, 3-pin, A-coded, straight, 180°
- UL (Underwriters Laboratories)
- unshielded

Connection type Soldering

Ambient temperature min./max. -25 ... 80 °C
Operational 48 V AC/DC
voltage
Protection class IP67
Weight 0.009 kg

Technical data

Part No. Max. current suitable cable-Ø min./max

1834484173 4A 3.5 / 5 mm

Technical information

The specified protection class is only valid in assembled and tested state.

Technical information

Material

Housing Polyamide

PDF creation date: 20.06.2020

Page 170 | AVENTICS

Dimensions

Dimensions

Pin assignments

Pin assignment, socket

PDF creation date: 20.06.2020

Page 171 | AVENTICS

Round plug connector, Series CON-RD

- Socket, M8x1, 3-pin, A-coded, angled, 90°
- UL (Underwriters Laboratories)
- unshielded

Connection type Soldering

Ambient temperature min./max. -40 ... 85 °C
Operational 48 V AC/DC
voltage
Protection class IP67
Weight 0.01 kg

Technical data

Part No. Max. current Contact assignment suitable cable-Ø min./max

1834484174 4A 3 3.5 / 5 mm

Technical information

The specified protection class is only valid in assembled and tested state.

Technical information

Material

Housing Polyamide

PDF creation date: 20.06.2020

Page 172 | AVENTICS

Dimensions

Dimensions

Pin assignments

Pin assignment, socket

PDF creation date: 20.06.2020

Page 173 | AVENTICS

Round plug connector, Series CON-RD

- Socket M8x1 3-pin A-coded straight 180°
- open cable ends
- with cable
- UL (Underwriters Laboratories)
- unshielded

Ambient temperature min./max. -25 ... 85 °C

Operational 48 V AC/DC
voltage
Protection class IP67
Wire cross-section 0.24 mm²
Weight See table below

Technical data

Part No. Max. current Number of Cable-Ø Cable Certification Weight

wires length
1834484166 4A 3 4.5 mm 3m UL (Underwriters Laboratories) 0.087 kg
1834484168 4A 3 4.5 mm 5m UL (Underwriters Laboratories) 0.141 kg
1834484247 4A 3 4.5 mm 10 m UL (Underwriters Laboratories) 0.277 kg

Technical information

The specified protection class is only valid in assembled and tested state.

Technical information

Material

Housing Polyurethane

Cable sheath Polyurethane

PDF creation date: 20.06.2020

Page 174 | AVENTICS

Dimensions

Dimensions

L = length

Pin assignments

Pin assignment, socket

(1) BN=brown
(3) BU=blue
(4) BK=black

PDF creation date: 20.06.2020

Page 175 | AVENTICS

Round plug connector, Series CON-RD

- Socket M8x1 3-pin A-coded angled 90°
- open cable ends
- with cable
- unshielded

Ambient temperature min./max. -40 ... 85 °C

Operational 48 V AC/DC
voltage
Protection class IP67
Wire cross-section 0.24 mm²
Weight See table below

Technical data

Part No. Max. current Number of wires Cable-Ø Cable length Weight

1834484167 4A 3 4.5 mm 3m 0.087 kg

1834484169 4A 3 4.5 mm 5m 0.139 kg
1834484248 4A 3 4.5 mm 10 m 0.279 kg

Technical information

The specified protection class is only valid in assembled and tested state.

Technical information

Material

Housing Polyurethane

Cable sheath Polyurethane

PDF creation date: 20.06.2020

Page 176 | AVENTICS

Dimensions

Dimensions

L = length

Pin assignments

Pin assignment, socket

(1) BN=brown
(3) BU=blue
(4) BK=black

PDF creation date: 20.06.2020

Page 177 | AVENTICS

Silencers, series SI1

- M5
- Sintered bronze

Working pressure min./max. 0 ... 10 bar

Ambient temperature min./max. -25 ... 80 °C
Medium Compressed air
Sound pressure level 72 dB
Weight 0.004 kg
Comment Flow characteristic curves can be found
under “Diagrams”.

Technical data

Part No. Compressed air connection Flow Delivery unit

Qn
1827000006 M5 398 l/min 10 piece

Weight per piece

Nominal flow Qn at p1 = 6 bar (absolute) freely discharged. Sound pressure level measured at 6 bar against atmosphere at 1 m
distance.

Technical information

Material

Silencer Sintered bronze

Thread Brass

PDF creation date: 20.06.2020

Page 178 | AVENTICS

Dimensions

Dimensions in mm

Diagrams

Flow diagram, 1827000006

PDF creation date: 20.06.2020

Page 179 | AVENTICS

Silencers, series SI1

- G 1/8
- Sintered bronze

Working pressure min./max. 0 ... 10 bar

Ambient temperature min./max. -25 ... 80 °C
Medium Compressed air
Sound pressure level 75 dB
Weight 0.01 kg
Comment Flow characteristic curves can be found
under “Diagrams”.

Technical data

Part No. Compressed air connection Flow Delivery unit

Qn
1827000000 G 1/8 1623 l/min 10 piece

Weight per piece

Nominal flow Qn at p1 = 6 bar (absolute) freely discharged. Sound pressure level measured at 6 bar against atmosphere at 1 m
distance.

Technical information

Material

Silencer Sintered bronze

Thread Brass

PDF creation date: 20.06.2020

Page 180 | AVENTICS

Dimensions

Dimensions in mm

Diagrams

Flow diagram, 1827000000

PDF creation date: 20.06.2020

Page 181 | AVENTICS

Silencers, series SI1

- M5 G 1/8
- Sintered bronze

Working pressure min./max. 0 ... 10 bar

Ambient temperature min./max. -25 ... 80 °C
Medium Compressed air
Sound pressure level See table below
Weight See table below
Comment Flow characteristic curves can be found
under “Diagrams”.

Technical data

Part No. Compressed air connection Sound pressure level Flow Delivery unit Weight
Qn
1827000032 M5 79 dB 252 l/min 10 piece 0.005 kg
1827000031 G 1/8 85 dB 700 l/min 10 piece 0.001 kg

Weight per piece

Nominal flow Qn at p1 = 6 bar (absolute) freely discharged. Sound pressure level measured at 6 bar against atmosphere at 1 m
distance.

Technical information

Material

Silencer Sintered bronze

Thread Brass

PDF creation date: 20.06.2020

Page 182 | AVENTICS

Dimensions

Dimensions

Dimensions

Part No. Port G L1 L2 SW

1827000032 M5 5 10.3 7
1827000031 G 1/8 6 11.5 13

Sound pressure level measured at 6 bar at 1 m distance

Diagrams

Flow diagram, 1827000032

PDF creation date: 20.06.2020

Page 183 | AVENTICS

Flow diagram, 1827000031

Diagrams

Flow diagram, 1827000033

Diagrams

Flow diagram, 1827000034

Diagrams

PDF creation date: 20.06.2020

Page 184 | AVENTICS

Flow diagram, 1827000035

Diagrams

Flow diagram, 8145003400

Diagrams

Flow diagram, 8145001000

Diagrams

PDF creation date: 20.06.2020

Efficient pneumatic solutions, our program:
cylinders and drives, valves and valve systems,
air supply management

Visit us: Emerson.com/Aventics

Your local contact: Emerson.com/contactus

Emerson.com

Facebook.com/EmersonAutomationSolutions

LinkedIn.com/company/Emerson-Automation-Solutions

Twitter.com/EMR_Automation

An example configuration is depicted on the title page. The delivered product may thus vary from that in the illustration. Subject to change. This
Document, as well as the data, specifications and other information set forth in it, are the exclusive property of AVENTICS GmbH. It may not be
reproduced or given to third parties without its consent. Only use the AVENTICS products shown in industrial applications. Read the product
documentation completely and carefully before using the product. Observe the applicable regulations and laws of the respective country. When
integrating the product into applications, note the system manufacturer’s specifications for safe use of the product. The data specified only serve
todescribe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information.
The information given does not release the user from the obligation of own judgment and verification. It must be remembered that the products are
subject to a natural process of wear and aging.

The Emerson logo is a trademark and service mark of Emerson Electric Co. Brand logotype are registered trademarks of one
of the Emerson family of companies. All other marks are the property of their respective owners. © 2017 Emerson Electric Co.
All rights reserved.
2019-03