Scribd
Upload
94 views

GZD 800 Vibrating Feeder

The GZD 800 Vibrating Feeder is used to evenly and continuously feed materials into crushers and screening equipment. It transfers materials from a hopper uniformly and periodically using linear vibrations. The feeder can be adjusted to control the flow rate and vibrations, and has a simple design that is stable, easy to use and maintain, and prevents dust pollution.

Uploaded by

martinez gerardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
94 views

GZD 800 Vibrating Feeder

The GZD 800 Vibrating Feeder is used to evenly and continuously feed materials into crushers and screening equipment. It transfers materials from a hopper uniformly and periodically using linear vibrations. The feeder can be adjusted to control the flow rate and vibrations, and has a simple design that is stable, easy to use and maintain, and prevents dust pollution.

Uploaded by

martinez gerardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

GZD 800 Vibrating Feeder

GZD 800 Vibrating Feeder description:


The Vibrating Feeder (Vibratory feeder) is mainly used in feeding materials before
coarse crushing. Our GZD series machine can put the block or granule materials from
the material storage into the charging device in time evenly and continuously.
Therefore, it can realize even feeding for crushers in sandstone production line and
make rough screening of materials. The vibrating feeder is widely used to match the
crushing and sieving equipment in many industries including metallurgy, coal mine,
mineral dressing, building material, chemical, grinding, etc.

The vibrating feeder is using linear direction feeding equipment to transfer the large
size materials and granular materials from hopper to receiving device uniformly,
periodically and continuously in the production flow and to feed materials into the
crusher continuously and uniformly also to screen the materials in the sandstone
production line. It is widely used to match the crushing and sieving equipment in
many industries including metallurgical industry, coal mine, mineral dressing,
building material, silicate and chemical, grinding, etc. In the Sand-Stone production
line, it can send materials to crusher evenly and continuously and also it can screen
materials roughly.

Vibrating feeder's capability and characteristic:


It vibrates calmly, works reliably with a long life-span; its stimulating vibrancy power
can be adjusted, while the flux can be changed and controlled, it is convenient and
stable to adjust; Vibrating feeder's vibrating electrical engine is stimulating vibrancy
fountain, with low noise, low cost of electricity, and good adjusting capability,
without rushing phenomenon. Its structure is simple and works stably and easy to
adjust and install, and it is convenient to maintain and take care for its light weight
and small size, and it can avoid powder and dust pollution when using the closed
structural body.

GZD 800 Vibrating Feeder display:

You might also like