Scribd
Upload
119 views2 pages

Web Doubler Plate Weld

This document specifies plate properties for a web doubler connection, including an effective plate thickness of 0.5 inches, yield strength of 50 ksi, and ultimate strength of 70 ksi. It then calculates the minimum required weld strength of 0.607 inches using an equation, and determines that a 5/8" fillet weld size is needed to meet this requirement.

Uploaded by

gv Sathishkumar Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views2 pages

Web Doubler Plate Weld

This document specifies plate properties for a web doubler connection, including an effective plate thickness of 0.5 inches, yield strength of 50 ksi, and ultimate strength of 70 ksi. It then calculates the minimum required weld strength of 0.607 inches using an equation, and determines that a 5/8" fillet weld size is needed to meet this requirement.

Uploaded by

gv Sathishkumar Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Plate properties

Web doubler plate thickness t eff 0.5in

Fy 50ksi

FEXX 70ksi

1.70 Fy t eff
Required Weld strength Wmin 0.607 in DG 13 Eq 4.4-7
FEXX

t eff 2 0.707 in
W.min > t.eff

Wmin 16 9.714 in

Therefore provide 5/8" Fillet weld size

You might also like