Scribd
Upload
113 views

Nitinol Data Sheet

This document provides information on Ulbrich Specialty Wire Products including their capabilities for producing fine nitinol wire. It details dimensions, tolerances, mechanical properties and packaging options for flat and round nitinol wire.

Uploaded by

me
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
113 views

Nitinol Data Sheet

This document provides information on Ulbrich Specialty Wire Products including their capabilities for producing fine nitinol wire. It details dimensions, tolerances, mechanical properties and packaging options for flat and round nitinol wire.

Uploaded by

me
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ULBRICH SPECIALTY WIRE PRODUCTS

692 Plant Road (864) 647-6087


Westminster, SC 29693 [email protected]

ULBRICH.COM CAPABILITY SHEET


Fine Nitinol: Flat & Round Wire
BASE MATERIAL ASPECT RATIO
Standard Binary per Min Thickness Max Thickness
Chrome Doped
ASTM F2063 (NiTi 1) 2:1 @ 0.0010” [inch] 10:1 @ 0.0025” [inch]

Dimensions & Size Tolerances (Standard tolerances - please ask for your custom requirement)

F L AT W I R E
This information may not be passed on to third parties without approval by Ulbrich Specialty Wire Products.
All information provided is based on our current standard knowledge and does not claim to be exhaustive.

NOMINAL VALUE TOLERANCE


Minimum Maximum Minimum Maximum
THICKNESS 0.0003” [inch] 0.0060” [inch] +/- 0.0001” [inch] +/- 0.0006” [inch]
WIDTH 0.0015” [inch] 0.0200” [inch] +/- 0.0002” [inch] +/- 0.0020” [inch]
© 2017 Ulbrich Stainless Steels & Special Metals, Inc. All rights reserved.

ROUND WIRE
NOMINAL VALUE TOLERANCE
Minimum Maximum 0.0020” and under +/- 0.00010” [inch]
DIAMETER 0.0007” [inch] 0.0080” [inch] 0.0021” to 0.0050” +/- 0.00015” [inch]
0.0051 and above +/- 0.00020” [inch]
Typical Mechanical Properties of Nitinol
TYPICAL AS DRAWN (AD) TYPICAL STRAIGHT ANNEALED (SE)
UTS (ksi) Elongation (%) UTS (ksi) Elongation (%)
NITI 1 200 Min 4% Min 180 Min 10% Min
CHROME DOPED 210 Min 4% Min 180 Min 10% Min

Packaging (Our machinery can adapt to most custom spools upon request)

SPOOL TYPE DIMENSIONS


30mm Steeger 1.57” flange x 1.40” width x 1.18” barrel x 0.42” bore
26mm Steeger 1.69” flange x 1.40” width x 1.02” barrel x 0.42” bore
15mm Steeger 1.57” flange x 1.40” width x 0.59” barrel x 0.42” bore
Wardwell 2.60” flange x 3.25” width x 0.74” barrel x 0.657” bore
NEB 1.32” flange x 3.95” width x 1.37” barrel x 0.33” bore
DIN 100 3.94” flange x 2.52” width x 2.48” barrel x 0.63” bore
DIN 125 4.92” flange x 4.92” width x 3.15” barrel x 0.63” bore
Bulk Spools Various

You might also like