CONSTRUCTION OF TERMINAL SEWAGE

PUMPING STATION AT DOHA NORTH STW

PACKAGE-3
PROJECT ID: PA 2020 C 009G
PREQUALIFICATION

TEMBO SEVENSTAR MEP PIPE HANGERS AND

SUPPORTS
Contractors Name AL JABER ENGINEERING W.L.L.
Consultant: KHATIB & ALAMI CONSOLIDATED ENGINEERING COMPANY
Client Name: ASHGHAL (Public Works Authority)

Document preparation, verification and Signature

Name in print
approval
Prepared by Technical Engineer Mishal Gamal M M mishal gamal
Checked by Sr. Project Engineer

Verified by QA/QC Engineer

Approved by Project Manager

Revision Date Purpose

00 07-09-2022 For Review & Approval
Client Consultant Contractor

Pre-Qualification Supplier/Manufacturer submission Requirements

FORM NO: C823-3-CK-GEN-040 - Rev-1
Checklist

Contract Construction of Sewage Terminal Pumping Station at Doha North STW Package-3 – C823/3

Sr. Item to be Verified in attachment JEC DC JEC QC Remarks

1 Listed in PVL  Folder 1

2 Scope of works  Folder 2
3 BOQ reference /Specification section/Specific reference drawing  Folder 3
4 Technical Data sheet  Folder 4
5 Company profile  Folder 5

6 Company Organization Chart  Folder 6

7 Compliance statement  Folder 7

8 Valid CR copy/ company ID  Folder 8

9 Valid ISO and other management certificates (9001, 14001 & 18001)  Folder 9
Copy of Valid Certificate/Approval of the firm (Manufacturer/Supplier) from
10
concerned government departments  Folder 10

11 List of Projects (completed and ongoing)/ copy of approval  Folder 11

12 Copy of previous ASHGHAL approval  Folder 12

Comments:
1 - LISTED IN PVL
28 MAY 2022
1. Comply as per QCS 2014/project Specs/Approved Drawings. 2. Provide recent previous ashghal Projects approval for
the HVAC support System manufacturer. 3)Provide the duct & pipe support calculations.

29-May-2022
 Company Comments Review Summary

PROJECT ID NFE1 ORIGINATOR CODE CTC

Reference Rev. Rev. Date St. Class Discipline Doc Type
NFE1-CTC- B 2021-10-14 IFA 1 HV MAR
HV-MAR-00009

Review Details:
Previous Rev. Return Code:

Document received with Transmittal IN: NFE1-T-CTC-QG-01169

Receipt Date: 2021-10-14
The Document Review has been initiated on: 2021-10-14
Review Time Frame: 15 day(s)
Role Name Return Code Date of Comment
approver Jamal Kaddoura (11445) B-Approved/Reviewed 2021-10-17
with minor comments

If applicable as per Approver return code, comments are available either after this
page and/or as external attached comments below.
Number of annotation(s): 1

This page is automatically generated from PIMS and

shall be considered as official answer from COMPANY.
2 - SCOPE OF WORKS
3 - SPECIFICATION REFERENCE
QCS 2014 Section 22: Air Conditioning, Refrigeration and Ventilation Page 2
Part 09: Accessories

9 ACCESSORIES

9.1 GENERAL

9.1.1 Scope

1 This Part details the requirements for accessories that are to be included as specified in the
Project Documentation.

2 Related Sections and parts are as follows:

This Section
Part 5 Chilled Water Pipework

Section 1 General
Section 10 Instrumentation control and Automation
Section 21 Electrical Works

9.2 SOUND AND VIBRATION CONTROL EQUIPMENT

9.2.1 General

1 The noise produced by the installation in the spaces served, in adjacent buildings and in the
open air surrounding plant rooms shall be kept as low as possible. This shall be specially
considered in the selection of fans (including those for condensers and cooling towers),
motors fan coil units and terminal units, grilles and diffusers and the internal finish and
arrangements distribution ducting.

2 All plant and equipment shall be isolated in such a manner that noise and vibration is not
transmitted through the structure.

3 Anti vibration equipment will be manufactured by a specialist company acceptable to the

Engineer with standard ratings information available.

4 All necessary provisions shall be included to reduce the noise level of all plan and equipment
to the required level detailed in the QGEWC regulations.

9.2.2 Silencers

1 All silencers shall be fitted with drilled angle flanges to suit the adjacent plant.

2 The method of installing the acoustic elements in the casing shall not cause air leaks.

3 The acoustic elements shall incorporate full aerodynamic leading and trailing edges (not
square ends).

4 The acoustic material installed in the element shall be inert, rot and vermin proof, non-
hygnoscopic, non-combustible mineral wool or glass fibre acoustic medium.

3
5 The acoustic material shall be packed to a density of not less that 48 Kg/m and retained by a
perforated steel sheet facing and fine membrane to stop the acoustic material contaminating
the system air.
QCS 2014 Section 22: Air Conditioning, Refrigeration and Ventilation Page 3
Part 09: Accessories

6 Where required for water or grease laden duties an imperious but acoustically transparent
membrane shall be fitted behind the perforated metal facing.

7 The silencer units shall be delivered to site with blocked ends to prevent the ingress of debris
during installation and storage to reduce the risk of damage.

8 The silencers shall be constructed of heavy gauge steel and shall match the adjacent
ductwork. Galvanized silencers shall not be used in stainless steel ductwork etc.

9 The silencers shall be factory manufactured and technical data submitted and approved in
advance of ordering the units. The technical data shall include both the acoustic and
aerodynamic performance.

10 Where a silencer is made under licence or part assembled locally, tests must be made after
assembly and witnessed by an independent authority.

11 The static pressure loss of all silencers required shall be considered in all handling
equipment original selection.

9.2.3 Anti-Vibration Mountings

1 All dynamic machinery shall be isolated from the building structure by vibration isolators
and/or vibration isolation materials which shall be specifically designed and selected to suit
the machinery for which it is to be used.

2 Spring anti-vibration mounts.

(a) each mounting shall consist of a telescopic top and bottom housing containing one or
more helical steel springs of 50 mm minimum diameter as the principle isolation
elements
(b) the bottom plate shall be fitted with a 6 mm thick neoprene pad bonded to it to reduce
high frequency flaming
(c) when used with equipment having a fluid weight in excess of 25 % of the total empty
equipment weight a suitable hold down or restrained shall be incorporated
(d) the mounting shall incorporate a built in levelling device and resilient inserts as guides
for the upper and lower housings.
(e) all spring mounts shall be designed such that the lateral spring stiffness is equal to the
vertical stiffness
(f) the spring mounts shall be selected for all items of plant with stiffness to cater for any
eccentric weight distribution over the unit base
(g) an equal static deflection shall be provided on all mounts to avoid the possibility of
flanking caused by the plant tilting and rendering one or more of the mounts solid.

9.2.4 Resilient Hangers

1 Resilient hangers shall be of the two element design with helical spring and neoprene in -
shear element.

2 The elements shall be mounted in a steel section pre-drilled and tapped at the top and
bottom to receive threaded hanger rod.

3 The resilient hanger shall be located so that they are vertical.

QCS 2014 Section 22: Air Conditioning, Refrigeration and Ventilation Page 4
Part 09: Accessories

9.2.5 Rubber or Neoprene Mounts

1 The mounts shall consist of a steel top plate and base plate completely embedded in colour
coded neoprene for easy identification of rated load capacity.

2 The mountings shall be moulded with non-skid ribbed construction on the top plate and base
plate.

3 The mountings shall be equipped with bolt holes in the base plate and tapped holes in the top
plate so that they can be bolted to the floor and equipment when required.

4 Plant and equipment as detailed in the QGEWC regulations shall be installed on anti-
vibration units in the form of multi-layer rubber pads.

5 Multi-layer pads shall compose of rubber sheets with square grid pattern on both sides and
steel insert sheets of 1.4 mm. The composite pad thickness shall be selected the suit the
equipment but shall not be less than 32 mm.

9.2.6 Concrete Inertia Base

1 The concrete inertia base shall be constructed of an all welded steel framework.

2 Height saving brackets shall be welded to the framework to install the anti-vibration mounts.

3 The frame depth shall be approximately 1½ the longest dimension of the equipment, with a
minimum depth of 150 mm.

3
4 The bottom of the frame shall be blanked off and concrete (2,300 kg/m ) poured over steel
reinforcing rods positioned 35 mm above the bottom.

5 The total weight of the base shall be at least 1.5 times the total equipment weight.

6 Concrete inertia bases for split case pumps shall be extended in width to allow for provision
of supports for suction and discharge elbows.

7 When complete with the equipment installed checks shall be carried out to ensure that a
positive air gap is present between the inertia base and floor.

9.2.7 Plate Bases

1 Where required equipment shall be mounted on anti-vibration rails or steel plant bases.

2 The anti-vibration rail shall comprise of steel beam with height saving brackets at each end.

3 The steel plant bases shall comprise of an all welded steel framework to support the
equipment. This may form a composite A.V. rail.

4 The A.V. rails or steel plant bases shall be sufficiently rigid to provide adequate support for
the equipment and prevent undue strain on the equipment.
QCS 2014 Section 19: Plumbing Work Page 7
Part 02: Water Distribution

2.4.3 Pipework Jointing

1 Jointing of pipes shall be in accordance with the relevant provisions of BS 6700

2 All proprietary joints shall be made in accordance with the manufacturer’s instructions.

3 Care shall be taken to establish satisfactory jointing techniques for all water service pipework.
All burrs shall be removed from the ends of the pipes and any jointing materials used shall be
prevented from entering the water system

4 All piping and fittings shall be cleaned internally and be free from particles of sand, soil metal
filings and chips etc.

5 Jointing systems using elastomeric sealing rings shall be Type W, complying with the
relevant provisions of BS 2494, and shall be obtained from the pipe manufacturer.

2.5 PIPE FIXINGS

2.5.1 General Requirements

1 Copper and stainless steel piping shall be secured by clips or brackets made from copper or
copper-alloy.

2 Steel piping shall be secured by clips or brackets made from steel, copper alloy or suitable
plastic. Copper clips or brackets shall not be used for fixing steel piping.

3 PVC-U, polyethylene, polypropylene and CPVC piping shall be secured by clips or brackets
made from suitable metal or plastic. Allowance shall be made for free lateral movement
within the clips and brackets.

4 Piping that is insulated shall be secured on clips or brackets that allow sufficient space
behind the back of the pipe and the batten or wall to which the pipe is fixed for the insulation
to be properly installed.

2.5.2 Spacing of Pipe Fixings

1 The spacings for fixings for internally located piping shall be in accordance with Table 2.1,
2.2, 2.3 and 2.4 as applicable. The figures given are based on an ambient temperature of
20C. For other temperature ranges the pipe manufacturer should be consulted.
QCS 2014 Section 23: Fire Fighting and Fire Alarm Systems Page 12
Part 04: Fire Fighting System

(c) flanges shall be malleable iron to ASTM A 47 or ductile iron to ASTM A 536, with a
hinged, two-piece design, suitable for opening and engaging the groves, and shall be
secured in position with a tight-fitting lock bolt. Cast iron flanges shall comply with
ANSI B.16.1 and steel flanges steel shall comply with ANSI B 16.5
(d) valves shall be grooved end design with encapsulated body and disc. Neck design
shall readily accommodate insulation. Valves shall have pressure assisted double seal
and be capable of 12 bar bubble tight shutoff. Butterfly valves shall be with gear
actuator.

4.6.2 Hangers Supports Anchors and Guide

1 The pipework shall be supported, anchored and guided in order to preclude failure or
deformation. The Contractor shall construct and install hangers, supports, anchors, guides
and accessories as necessary to the approval of the Engineer. Supports shall be designed to
support the weight of the pipe, the weight of fluid and the weight of pipe insulation.

2 Piping shall be securely fastened to the structure without over-stressing any portion of the
structure itself. Pipe supports, anchors and guides shall be secured to concrete by means of
inserts or if greater load carrying capacity is required by means of steel fishplates embedded
in the concrete.

3 Hanger shall be arrange so as to prevent transmission of vibration from piping to building

and supports.

4 Pipe hangers and supports shall be furnished complete with rods, bolts, lock, nuts, swivels
couplings, brackets and all other components and accessories to allow installation to freely
expand and contract.

5 Hangers spacing shall be such that the piping is installed without undue strains and stresses
and provision shall be made for expansion, contraction, structural settlement and water-
hammer.

6 Supports, clamps and hangers shall be made of galvanized steel, fixed with drilled plugs.

4.7 PUMPS
4.7.1 General

1 Furnish and install where shown on the drawings one LPCB listed fire pump package
composed of both electrical and compression ignition engine driven single stage or
multistage centrifugal fire pump complete with motor, control, fittings, jockey pump and
speciality accessories necessary to complete the installation in every respect. The complete
installation shall be in accordance with the requirements of, and meet with the approval of,
the Civil Defence Department and any other authorities having jurisdiction. Centrifugal fire
pumps shall have a horizontal shaft with electric motor drive. Jockey fire pumps shall have
electric motor drives.
QCS 2014 Section 22: Air Conditioning, Refrigeration and Ventilation Page 4
Part 06: Ductwork and Air-Side Equipment

6 Laundry extract ductwork shall be air and water tight construction manufactured from
aluminium sheets in accordance with BS 1470.

7 Laboratory ductwork or systems carrying corrosive gases shall be manufactured of PVC or

FRP. However before installation of such system the QGEWC shall be approached for
written approval.

6.2.2 Ductwork Specification

1 Ductwork fabrication and hanging methods shall be as described in the “Equipment” Volume
of the American Society of Heating, Refrigerating and Air Conditioning Engineers Guide and
Data Book, latest edition, and/or current edition of applicable manuals published by the Sheet
Metal and Air Conditioning Contractors National Association Inc., where methods described
in these volumes are not at variance with the requirements of any authority having
jurisdiction, or do not conflict with methods described hereafter. Ductwork shall not be ship
fabricated until work has been job measured and interference situations co-ordinated.

2 Any Contractor who is very familiar with British Standards may refer to BS CP 352 and DW
144. Any discrepancy will be clarified by the Engineer on request.

3 In any event, the standard of work required is the best available, and the specifications are to
be so interpreted.

6.2.3 Ductwork General

1 All dimensions shall be checked on site before ductwork manufacture is commenced.

2 The whole of the ductwork installation shall be carried out by an approved specialist in
ductwork manufacture and installation. No ductwork shall touch the building structure or
building finishes direct, but shall be isolated with insulating spacer.

3 The fabrication shall be carried out in a neat and workmanlike manner with all ductwork true
in size and cross-section, braced and stiffened as specified and with all internal and external
surfaces free from projections and sharp edges.

4 At each main branch in ductwork and at each fan discharge or suction, provide sufficient
number of Pitot tube holes for balancing systems. Also, provide test holes for traverse fan
discharge and at all equipment. Test holes shall be located within easy reach of catwalks or
ladder. Each test hole shall have 20 mm clear opening, provided with a metal ring place with
a threaded hole in the boss, and matching screwed head plug. Where these plugs are
installed in insulated ductwork, provide an extension collar against which the insulation can
be finished.

5 Reinforced holes shall be provided where thermometers, manometers, thermostats, gauges,

damper rods etc., occur in ductwork. Extended collars shall be provided for the reinforced
holes where these occur on insulated ductwork. Where copper tubing passes through
ductwork, or casing, provide a rubber grommet to prevent damage to copper tubing.
QCS 2014 Section 22: Air Conditioning, Refrigeration and Ventilation Page 5
Part 06: Ductwork and Air-Side Equipment

6 Ductwork shall be rigidly suspended or supported from building structure. Expansion type
concrete inserts shall be placed so that the fastener is in shear rather than tension. Powder
actuated fasteners placed by an explosive charge will not be accepted. Angle type trapeze
hangers with rod supports space at 2 m maximum shall be used. “C” type beam clamps will
not be accepted. Provide necessary steel angle iron required for bracing of ductwork or
equipment, and for supporting ductwork from building structure.

7 A layer of felts strip 12.5 mm compressed thickness shall be provided between any support
member which is designed to clamp or grip the duct (e.g. circular duct band clip) or on which
the duct is to rest. All supports shall be hot dip galvanized.

8 Increase in duct size shall be gradual. Where width or largest dimension of a duct is over
450 mm, duct shall be stiffened by bending in a break across corners in both directions.
Ducts shall be self-supporting and complete in themselves. Single thickness partition
between ducts will not be accepted. Visible internal portions of duct outlets to grilles and
registers shall be painted in dull black.

9 All necessary allowances and provisions shall be made in the installation of the ducts for the
structural framing of the building and when changes or offsets are necessary, the required
cross-sectional areas shall be maintained. All of these changes however, shall be approved,
and installed as directed at the time.

10 During installation, the open ends of ducts shall be protected with blank, flanged sheet metal
baffles, securely attached to prevent debris and dirt from entering.
TC

11 Where ducts are shown connecting to masonry openings and/or along the edges of all
AM

plenums at floors, walls, etc., provide a continuous 30 x 30 x 4 mm galvanized angle iron

which shall be bolted to the structure and made airtight to same by applying caulking
compound on the angles before they are drawn down tight. The sheet metal at these
locations shall be bolted to the angle iron framing.

12 All air ducts, casings, plenums etc., shall be constructed of lock forming quality prime
galvanized steel sheets, which are free from blisters, slivers, pits, imperfectly coated spots
etc. No second quality sheet metal allowed.

13 Where damage (or rusting) has occurred on galvanized ductwork, the affected section shall
be made good by painting with two coats of zinc-rich paint and approved finishing paint, or
where the damage in the Engineer‟s opinion cannot be made good, then a new section of
ductwork shall be provided at no cost to the contract.

14 Duct shall be constructed using double or Pittsburgh lock corner seams. All seams shall be
hammered down and made airtight by applying sealant before hammering down. For
transverse joints, refer to the current ASHRAE guide for low pressure ductwork.

15 Support the vertical ducts installed in the various shafts at each floor level with galvanized
supporting irons of approved size.

16 Install these angles across the width of the shaft, with their ends attached to angle irons
securely anchored into the masonry walls of the shaft, or attached to the framing of the floor
openings. The ducts shall be bolted to these supporting angle irons.

17 Ensure that all openings required through floors, walls, partitions etc., for the duct system are
provide in the exact location required.
QCS 2014 Section 22: Air Conditioning, Refrigeration and Ventilation Page 6
Part 06: Ductwork and Air-Side Equipment

18 Each piece of ductwork shall be wiped inside and out before installation and all open ends
shall be capped and sealed to prevent entrance of dirt during construction. Ensure that
ductwork systems are clean and free from dirt, dust, grime, debris etc., before initial
operation of fans. Fans shall not be operated until the filters are installed and approved from
the Engineer has been obtained.

19 The bottom joint and 150 mm of vertical joint on outside air intake ducts and mixing chamber
ducts shall be soldered and made watertight. Provide drain connection and run copper drain
pipe to nearest floor drain.

20 All fixing devices including nuts, bolts, washers etc., used in the construction or support of
galvanized ductwork shall be sheradised, or cadmium-plated.

21 Final connections to diffusers shall be carried out using flexible ductwork or solid spigots as
detailed in the Project Documentation.

22 Sealants, gaskets and tapes shall comply with DW 144 Part 7 section 27 or DW 151 section
12 as appropriate.

6.2.4 Low Pressure Ductwork

1 This applies to ductwork with mean velocities less than 10 m/s and static pressures of 500
Pa or less.
TC

2 Rectangular low pressure ductwork shall be fabricated from prime quality, re-squared, tight
coat galvanized steel sheets as specified in the relevant standard.
AM

3 Reinforcing and joints shall be in accordance with ASHRAE Guide and Data Book,
Equipment Volume, 1988 Chapter 1 or in accordance with DW 144.

4 Low pressure suction and discharge plenum chambers shall be fabricated from 1.3 mm
galvanized steel with galvanized angle iron framework and bracing.

5 In square elbows and in elbows where the radius is less than 1.5 times the width of duct,
sheet metal deflector vanes shall be installed the full height of the duct, being securely riveted
in place. All vanes shall be double thickness vanes of two gauges heavier than the duct in
which they are installed, and shall be factory made, not site fabricated. Vanes shall be tack
welded to vane rail. For vane lengths over 1000 mm, tack weld vanes to 10 mm tie-rod at
mid-span.

6.2.5 Medium Pressure Ductwork

1 This clause applies to ductwork subject to pressures up to 1000 Pa.

2 Rectangular medium pressure ductwork shall be fabricated from prime quality, re-squared
tight coated galvanized steel sheet as specified in the DW 144.

3 Reinforcement and joints shall be as detailed in DW 144.

QCS 2014 Section 08: Drainage Works Page 22
Part 04: Pipeline Installation

2 Where pipelines passes underneath a wadi, ditch, open surface water channel, or other
waterway, the pipelines shall be encased in concrete. The minimum thickness of encasement
shall be 150 mm. Unless otherwise designated, the depth of cover shall not be less than 600
mm from the bed of the water coarse to the top of the concrete.

3 The Contractor shall fill the trench in both banks with rock fill or concrete up to the designated
levels. The extent of this work may be varied to suit each individual crossing. Unless
otherwise ordered, the concrete encasement of the pipe shall extend at least to a section
vertically below the tops of the banks. Protection against erosion to the banks shall be
provided by means of stone pitching or riprap.

4.4.11 Pipe Supports

1 Pipe hangers and saddle supports shall be of standard manufacture as shown on the
Drawings and in compliance with the following general requirements:

(a) piping shall be supported independently from appurtenances to which it is affixed.

(b) all weight of piping and contained fluids shall be transferred to a structures or
foundation system through stools, brackets, pipe saddle supports, or overhead hanger
systems.
(c) a support shall be provided for each pipe at or near the point where it is connected to
machinery or valves. A support shall be provided for each valve and special fitting.
(d) flexible joints shall be required at either ends of the support system.
(e) where necessary, expansion joints shall also be provided.
(f) pipe hangers and supports shall generally be fabricated in Mild Steel. These shall be
galvanised and painted with coal tar epoxy.

2 For pipelines to be fixed in culverts, the Contractor shall prepare proposals for thrust and
anchor support and submit them to the Engineer for approval. Such approval shall not relieve
the Contractor from his responsibility for the adequacy of his proposal. Additional
requirements for both location and details of supports may be shown on the Drawings or
directed by the Engineer as the work proceeds to suit the actual conditions encountered.

4.4.12 Building-in Pipes to Structures

1 Pipes constructed into a concrete wall or structure shall be protected with a concrete
surround integral with the external face of the structure as shown on the Drawings.

2 All internal and external protection membranes to the concrete shall be sealed around the
pipe openings as recommended by the membrane manufacturer. When the pipe is later
fixed, the remaining hole shall be re-formed and filled with non-shrink grout.

3 Any over-excavation adjacent to a structure or beneath the formation level of a pipeline,

either to be constructed under the Contract or in a future contract, shall be backfilled with
Grade 20 SRC concrete.

4 Pipes and pipe specials through concrete walls and floors shall as far as possible be
positioned and built in during construction. They shall be located exactly in the positions
shown in the Contract Drawings and shall be true to line and level. The Contractor shall take
particular care to ensure that fully compacted concrete is in contact with the pipe at all points.
QCS 2014 Section 22: Air Conditioning, Refrigeration and Ventilation Page 3
Part 05: Chilled Water Pipework

3 In congested areas where small bore chilled water piping is required, type K copper piping to
BS 2871 with cast bronze non de-zincifiable fittings may be used subject to the Engineer‟s
approval, and to a test of the welding operatives who will be doing the brazing. Brazed joints
are required throughout; no compression fittings will be permitted.

4 All pipework, pipework fittings, jointing materials and gaskets shall be stacked in storage
sheds in accordance with the manufacturer‟s recommendations and as required elsewhere in
the Project Documentation. The ends of all pipework shall be protected during transit and
storage.

5 Metal pipework may be stacked in the open, provided that such stacks are, in the Engineer‟s
opinion, adequately protected from weathering. The pipework shall be located in steel pipe
racks and clear of the floor, the floor being formed from either timber sleepers or paving
slabs. A watertight lightweight roof shall be provided to extend 450 mm beyond the edges of
the stack and tarpaulin or heavy gauge Polythene sheeting shall be provided to cover all
sides.

6 The pipes and fittings beyond stock rust shall not be used.

5.2.2 Pipework Supports

1 All pipework shall be adequately supported. All support installations shall be in accordance
with relevant standards, except where modified or extended by the Project Documentation.

2 Support shall allow free movement for expansion or contraction of pipework and shall be
located to ensure that pipework branches or fittings are not fouled by the support during
expansion or contraction of the pipework service.

3 Double banking of pipework from a single support position will be permitted, provided the
normal operating temperature of the fluids in the two pipes do not differ by more than 30 ºC,
but only where space restrictions prohibit individual support. Triple banking will not be
permitted.

4 Where double banking is necessary, the larger of the two pipes shall be uppermost, and
where pipes are the same size but manufactured from different materials, then the pipe
having the material with the lowest coefficient of expansion shall be uppermost. Support
intervals for double-banked pipework of different sizes shall relate to the smaller size.

5 Vertical rising pipes shall be supported at the base and the support shall withstand the total
weight of the pipe and fluid contained.

6 Supports shall not be permitted which clamp the pipe so that it in contact with building fabric
or structure.

7 All supports shall be specifically designed for the outside diameter of the pipe concerned
(including specified packing). Oversized brackets will be rejected.

8 Where non-ferrous pipework is to be supported using ferrous pipe clamps or rings, an

approved plastic coating applied to the clamp or ring shall be used to prevent contact
between the ferrous and non-ferrous surfaces. Where cast iron rollers are to be used in
contact with copper pipework, these shall be copper-plated.

9 Plastic pipework shall be supported using the pipework manufacturer‟s standard support clip.
QCS 2014 Section 22: Air Conditioning, Refrigeration and Ventilation Page 4
Part 05: Chilled Water Pipework

10 Mild steel pipework shall be supported individually by hangers consisting of malleable split
rings with malleable iron sockets or steel clevis type hangers or roller hangers where
indicated.

11 All chilled water pipe supports shall be mild steel and painted with a protective coating to suit
the environmental conditions.

12 Copper pipework where fixed against brick or dense concrete block walls shall be supported
using polished cast brass built-in brackets. Build in brackets shall be long shank type, when
pipework is to insulated or where the finish to the wall surface is greater than 15 mm,
elsewhere build-in brackets shall be the short shank type.

13 Copper pipework in exposed positions where fixed against lightweight hollow block or other
patent wall or partitions, shall be supported using polished cast brass screw on brackets.

14 All chilled water pipework services shall be supported around the insulation and not directly
around the pipework. Care shall be taken to ensure the integrity of vapour sealing is not
damaged in any way.

15 It shall be noted that in certain cases it will be necessary to adopt a combination of the
support methods indicated, and when supports are required to be detailed to suit special site
conditions or requirements, then these details shall be submitted to the Engineer for
approval. Anti-vibration supports shall be fitted at all locations where pipework vibration is
likely to be a problem.

16 Pipe support spacing shall be as detailed in Table 6.1.

17

Table 6.1
Pipe Support Spacing
Pipe Horizontal Vertical
Size Spacing Spacing
(mm) (m) (m)
Steel Pipe
Steel
Sch. 40 Copper ABS/PVC-U Copper ABS/PVC-U
Sch. 40

15 2.0 1.5 0.7 2.4 2.0 1.3

20 2.0 1.5 0.7 3.0 2.4 1.5
25-32 2.4 1.8 0.9 3.0 2.4 1.8
40 2.7 2.4 1.0 3.6 3.0 1.8
50 3.0 2.4 1.0 3.6 3.0 2.0
65 3.3 2.7 1.0 4.5 3.6 2.0
80 3.7 3.0 1.3 4.5 3.6 2.5
100/125 4.0 3.7 1.5 5.0 4.0 3.0
150 5.2 4.0 2.0 6.0 5.0 3.5
200 5.5 5.0 - - - -
250 6.0 5.5 - - - -
4 - TECHNICAL DATA SHEET
CERTIFICATES

Certificate of Compliance Certificate of Compliance

This is to Certify that the Quality Management System of This is to Certify that the Environmental Management System of

TEMBO GLOBAL INDUSTRIES LIMITED

TEMBO GLOBAL INDUSTRIES LIMITED PLOT NO. PAP D-146-147, TURBHE MIDC, TTC INDUSTRIAL ESTATE, OPP. BALMER LAWRIE VAN LEER
CO., TURBHE, NAVI MUMBAI-400709, MAHARASHTRA (INDIA)
PLOT NO. PAP D-146-147, TURBHE MIDC, TTC INDUSTRIAL ESTATE, OPP. BALMER LAWRIE VAN LEER
APL HOUSE B-1, BADRINATH, GROUND FLOOR, TUNGARESHWAR INDUSTRIAL COMPLEX, SR.NO-1,
CO., TURBHE, NAVI MUMBAI-400709, MAHARASHTRA (INDIA)
SURVEY NO-62, NEAR SHIV MANDIR, SATIVALI VILLAGE, VASAI (EAST), 401208, MAHARASHTRA (INDIA)
APL HOUSE B-1, BADRINATH, GROUND FLOOR, TUNGARESHWAR INDUSTRIAL COMPLEX, SR.NO-1,
UNIT NO.1/B BADRINATH, GROUND FLOOR, TUNGARESHWAR INDUSTRIAL COMPLEX, SR.NO-1,
SURVEY NO-62, NEAR SHIV MANDIR, SATIVALI VILLAGE, VASAI (EAST ), 401208, MAHARASHTRA (INDIA)
SURVEY NO-62, NEAR SHIV MANDIR, SATIVALI VILLAGE, VASAI (EAST), 401208, MAHARASHTRA (INDIA)
UNIT NO.1/B BADRINATH, GROUND FLOOR, TUNGARESHWAR INDUSTRIAL COMPLEX, SR.NO-1, SURVEY
NO-62, NEAR SHIV MANDIR, SATIVALI VILLAGE, VASAI (EAST ), 401208, MAHARASHTRA (INDIA)
has been assessed by ACAS and found to be in compliance with the
has been assessed and registered by Accredium and found to be in compliance with the following Environmental Management Standard:
requirements applicable as per Quality Management System conforming:

ISO 14001:2015
ISO 9001:2015 For the scope of
For the scope of MANUFACTURING & SUPPLY OF PIPE HANGERS AND SUPPORT SYSTEMS, ANTI
VIBRATION PRODUCTS, RUBBER SUPPORT INSERTS, S.S FLOOR DRAINS,
MANUFACTURING & SUPPLY OF PIPE HANGERS AND SUPPORT SYSTEMS, ANTI THREADED RODS & SLOTTED CHANNEL.
VIBRATION PRODUCTS, RUBBER SUPPORT INSERTS , S.S FLOOR DRAINS,
THREADED RODS & SLOTTED CHANNEL.
Certificate No. GACB5691

Certificate No. GACB5410 Date of Initial Registration 01st Nov. 2019 Issue Date 01st Nov. 2019

Date of Initial Registration 05th June 2019 Issue Date 05th June 2019 1st Surveillance on or before 01st Nov. 2020 Expiry Date 31st Oct. 2022

1st Surveillance on or before 05th June 2020 Expiry Date 04th June 2022 2nd Surveillance on or before 01st Nov. 2021
This Certificate is Valid for 3 years & will remain current subject to the company maintaining its system to the required standards (s). This will be monitored
2nd Surveillance on or before 05th June 2021 regularly by Accredium Certifications. The certification details & effectiveness are listed at www.acascert.com . The registration does not assure the quality of
products produced by a quality system. This certificate is granted based on the limited sampling audit as per relevant ISO standard & Accredium
Certifications is not responsible for client’s failure to maintain documented quality systems.
This Certificate is Valid for 3 years & will remain current subject to the company maintaining its system to the required standards(s). This will be monitored
regularly by Accredium Certifications. The certification details & effectiveness are listed at www.acascert.com . The registration does not assure the quality of
products produced by a quality system. This certificate is granted based on the limited sampling audit as per relevant ISO standard & Accredium
Certifications is not responsible for client’s failure to maintain documented quality systems.
CERTIFICATES
 INTRODUCTION

TEMBO GLOBAL INDUSTRIES LTD is an Industrial Powerhouse with a dominant presence in Manufacturing and Fabrication of

Metal Products used in Pipe Support Systems, HVAC Anti Vibration System and Equipments for Industrial, Commercial, Utility and

OEM Installation. It is Young, Agile and responsive company which is constantly expanding its capabilities to fuel its fairy tale

journey that seen it grown its standards of research, design, Engineering and Manufacturing that go into each and every product

that comprise our Pipe Hangers Products Line. Our customer have access to the most complete Support Systems offered in the

Industry, including Pipe Hangers, Rubber Support Inserts, Threaded Rod, Fasteners, Slotted Channels, Angles, Anti Vibration Products

and Flexible Connector.

Our products are listed by UNDERWRITER'S LABORATORY INC. (U.S.A.) AND FM GLOBAL APPROVED (U.S.A.). All Tembo

products are manufactured to meet or exceed industry standards set for their design and manufacture.

Tembo products are produced in technologically most advanced modern plants. These facilities are located in Commercial Capital of

the India i.e. Mumbai.

This catalogue is designed to be helpful to the engineers and contractors in the application and selection of pipe hangers, support

and HVAC for construction, maintenance, fire & safety.

If a unique application require a special products not included in this catalogue, Tembo engineer personnel are ready to furnish

design consultation and realistic material estimates in addition.

NOTICE

Tembo reserves the right to change the specification, materials and process or the availability of products at any time without prior

notice. While every effort had been made to assure the accuracy of information contained in this catalogue at the time of

publication, Tembo is not responsible for in accuracies resulting from undetected errors or omissions.
 TECHNICAL DATA

MATERIALS

MILD STEEL
Mild steel is used in the manufacture of Tembo pipe hangers and supports. Excellent strength characteristics and adaptability to
cold forming provide a well engineered design. By cold forming the steel, mechanical properties are increased, adding to the str-
uctural integrity of the fabricated hanger.

STAINLESS STEEL
AISI Type 304 and Type 316 are non-magnetic members of the austenitic stainless steel group. Several conditions make the use of
stainless steel ideal. These include reducing long term maintenance costs, high ambient temperatures, appearance, and stable
structural properties such as yield strength, and high creep resistance.

CORROSION
All metal surfaces exposed to the environment are affected by corrosion. Depending on the physical properties of the metal and its
proximity to other dissimilar metals, an electrochemical reaction may occur which causes an attack on the metal itself, resulting in
corrosion. Chemical corrosion is limited to highly corrosive environments, high temperatures, or a combination of both.

FINISHES
ZINC COATINGS
Protective zinc coatings are available on a number of pipe hangers and accessories in three basic forms:
Electro-galvanized, pre-galvanized, and hot-dip galvanized after fabrication. In all cases, the zinc protects the steel first as a
sacrificial anode to repair bare areas on cut edges and gouges. When exposed to air and moisture, zinc forms a tough, adherent
protective film consisting of a mixture of zinc oxides, hydroxides, and carbonates. The corrosion resistance of zinc is directly related
to its thickness and the environment. For example a 0.2 mil (5 μm) coating will last twice as long as a 0.1 mil (2.5 μm) coating in
the same environment.

ELECTRO-GALVANIZED
(ASTM B633 SC1 OR Sc3)
An electro-galvanized process deposits a coating of zinc on the steel by electrolysis from a bath of zinc salts. This coating is pure
zinc and adheres to the steel with a molecular bond. A maximum of 0.5 mils (12.7 μm) of zinc can be applied by this method. This
coating is recommended for in-door use in relatively dry areas.

PRE-GALVANIZED ZINC
(ASTM A653 COATING DESIGNATION G90)
Pre-galvanized zinc is produced by continuously rolling the steel coils or sheets through molten zinc at the steel mills. This is also
known as "mill galvanized" or "hot-dipped mill galvanized". Coils are then slit to size for fabrication of pipe hangers. Coating
thicknesses of G90, is 0.90 ounces per square foot (0.27 kg/m2) of steel surface.
Zn
ZnFe
Fe
ZnO

Protection of cut edges with zinc coatings.

Cut edges and welded areas are not zinc coated; however, zinc near the uncoated metal becomes a sacrificial anode which protects
the bar areas after a short period of time. Pre-galvanized steel is not generally recommended for use outdoors in industrial
environments, but is suitable for extended exposure in dry or mildly corrosive atmospheres.

HOT-DIP GALVANIZED AFTER FABRICATION (ASTM A123)

After a pipe hanger or fitting has been fabricated, it is completely immersed in a bath of molten zinc. A metallurgical bond is
formed, resulting in a zinc coating that completely coats all surfaces, including edges. Zinc coatings of this specification have a
minimum thickness of 1.50 ounces per square foot (0.45 kg/m2) on each side or a total of 3.0 ounces per square foot (0.9 kg/m2)
of steel.

ZINC FLAKE COATING

Zinc flake coating - Zinc flake coatings are non-electrolytically applied coatings, which provide good protection against corrosion.
These coatings consist of a mixture of zinc and aluminium flakes, which are bonded together by an inorganic matrix. Generally, for
the Zinc flake coatings, the coating thickness ranges from 5-15 microns. The corrosion resistance can be achieved over 1500 hours
by ASTM B117 in Salt Spray test. This layer provides very durable corrosion resistance for normal outdoor applications, and it
visually resembles a hot dip galvanized layer in some respects, as both are matte grey. The layer thickness of the zinc flake coatings
may be somewhat thicker compared to zinc electroplating (approximately 6 to 12 microns).
Hot dip galvanized after fabrication is recommended for outdoor exposure. For best results, a zinc rich paint (available from B-Line)
should be applied to field cuts. The zinc rich paint will provide immediate protection for field cuts and eliminate the short time
period for galvanic action to "heal" the damaged coating.

PLASTIC COATING
Some products offered by Tembo are plastic or vinyl coated for prevention of galvanic reaction between materials or for noise
reduction. These coated products can also be used where contact between glass pipe and hanger is not desirable. Felt lined hangers
may be substituted for same purpose.

RED PRIMER
A corrosion resistant metal primer containing rust inhibitive pigments.

QUALITY ASSURANCE
Tembo's Quality Assurance Program has been developed and implemented for compliance to various industry standards and
specifications.

GENERAL
TORQUE
The torque values in this catalog are to be used as a guide only. The relationship between the applied torque or torque wrench
reading and the actual tension created in the bolt may be substantially different. Important factors affecting torque-tension
relationships include friction under the bolt head or nut, hole tolerances, and torque wrench tolerances. Accuracy of many
commercial torque wrenches may vary as much as plus or minus 25%.

CHARTS AND TABLES

Charts and tables in this section are compiled from information published by nationally recognized organizations and are intended
for use as a guide only. Tembo recommends that users of this information determine the validity of such information as applied to
their own applications.

TEMBO RESERVES THE RIGHT TO MAKE SPECIFICATION CHANGES WITHOUT NOTICE.

SECTION 15140 - PIPE HANGERS AND SUPPORTS

PART I – GENERAL
1.01 SECTION INCLUDES
A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and
services to completely execute the pipe hanger and supports as described in this specification.

1.02 REFERENCES
A. ASTM B633 - Specification for Electro deposited Coatings of Zinc on Iron and Steel.
B. ASTM A123 - Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products.
C. ASTM A653 - Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip
Process.
D. ASTM A1011 - Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-
Strength Low-Alloy with Improved Form ability.
E. ANSI/MSS SP-58 - Manufacturers Standardization Society: Pipe Hangers and Supports - Materials, Design, and Manufacture.
F. ANSI/MSS SP-69 - Manufacturers Standardization Society: Pipe Hangers and Supports - Selection and Application.
G. NFPA 13 - Installation of Sprinkler Systems.

1.03 QUALITY ASSURANCE

A. Hangers and supports used in fire protection piping systems shall be listed and labeled by Underwriters Laboratories FM
APPROVALS.
B. Steel pipe hangers and supports shall have the manufacturer's BRAND name Tembo Sevenstar / Etalia, and applicable size
stamped in the part itself for identification.
C. Hangers and supports shall be designed and manufactured in conformance with ANSI/MSS SP-58.
D. Supports for sprinkler piping shall be in conformance with NFPA 13.

1.04 SUBMITTALS
A. Submit product data on all hanger and support devices, including shields and attachment methods. Product data to include, but
not limited to materials, finishes, approvals, load ratings, and dimensional information.
PART II – PRODUCTS
2.01 ACCEPTABLE MANUFACTURERS
A. Manufacturer: Subject to compliance with these specifications, pipe hanger and support systems shall be as manufactured by
Tembo Global Industries Ltd.

2.02 PIPE HANGERS AND SUPPORTS

A. HANGERS
1. Uninsulated pipes 2 inches and smaller:
a. Sprinkler Hanger.
b. Pipe Hanger.
c. Clevis Hanger.

B. VERTICAL SUPPORTS
1. Steel Riser Clamp sized to fit outside diameter of pipe.

C. COPPER TUBING SUPPORTS

1. Hangers shall be sized to fit copper tubing outside diameters.
a. Sprinkler Hanger.
b. Pipe Hanger.
c. Clevis Hanger.

D. SUPPLEMENTARY STRUCTURAL SUPPORTS

1. Design and fabricate supports using structural quality steel bolted framing materials as manufactured by Tembo. Channels shall
be roll formed, 12 gauge ASTM A1011 SS Grade 33 steel, 15/8” x 15/8” or greater as required by loading conditions. Submit
designs for pipe tunnels, pipe galleries, etc., to engineer for approval. Use clamps and fittings designed for use with the strut
system.

2.04 UPPER ATTACHMENTS

A. BEAM CLAMPS
1. Beam clamps shall be used where piping is to be suspended from building steel. Clamp type shall be selected on the basis of
load to be supported, and load configuration.
2. C-Clamps shall have locknuts and cup point set screws.
3. Center loaded beam clamps shall be used where specified.

B. CONCRETE INSERTS
1. Cast in place spot concrete inserts shall be used where applicable; either steel or malleable iron body. Spot inserts shall allow for
lateral adjustment and have means for attachment to forms. Select insert nuts to suit threaded hanger rod sizes.
2. Continuous concrete inserts shall be used where applicable. Channels shall be 12 gauge, ASTM A 1011 SS Grade 33 structural
quality carbon steel, complete with Styrofoam inserts and end caps with nail holes for attachment to forms. The continuous
concrete insert shall have a load rating of 2,000 lbs/ft. suitable for strut and rod sizes.

2.05 VIBRATION ISOLATION AND SUPPORTS

A. For refrigeration, air conditioning, hydraulic, pneumatic, and other vibrating system applications, uses a clamp that has a
vibration dampening insert and a nylon inserted locknut.
B. For larger tubing or piping subjected to vibration, use neoprene or spring hangers as required.
C. For base mounted equipment use vibration pads, molded neoprene mounts, or spring mounts as required.
D. Vibration isolation products are manufactured by Tembo Global Industries Ltd.

2.06 ACCESSORIES
A. Hanger rods shall be threaded both ends. Or continuous threaded rods of circular cross section. Use adjusting locknuts at upper
attachments and hangers. No wire, chain, or perforated straps are allowed.
B. Shields shall be 180° galvanized sheet metal, 12 inch minimum length, 18 gauge minimum thickness, designed to match outside
diameter of the insulated pipe.
C. Pipe protection saddles shall be formed from carbon steel, 1/8 inch minimum thickness, sized for insulation thickness. Saddles
for pipe sizes greater than 12 inch shall have a center support rib.

2.07 FINISHES
INDOOR FINISHES
A. Hangers and clamps for support of bare copper piping shall be coated with copper colored epoxy paint. Additionally a plastic
coating or a felt lining in hanger can be used.
B. Hangers for other than bare copper pipe shall be zinc plated in accordance with ASTM B633-SC3.
C. Strut channels shall be Pre-Galvanized in accordance with ASTM A653 G90 or have an electro-deposited Green Epoxy finish.

OUTDOOR AND CORROSIVE AREA FINISHES

A. Hangers and strut located outdoors shall be hot dip galvanized after fabrication in accordance with ASTM A123. All hanger
hardware shall be hot-dip galvanized or stainless steel. Zinc plated hardware is not acceptable for outdoor or corrosive use.
B. Hangers and strut located in corrosive areas shall be Type 304 (316) stainless steel with stainless steel hardware.
LIST OF CONTENTS

TGCH0UF000000 CLEVIS HANGER 1 TGHS000000000 HALF SADDLE 27

TGSHNUF000000 SPRINKLER HANGER WITH NUT 2 TGLS000000000 LIGHT SADDLE 28

TGSH000000000 SPRINKLER HANGER WITHOUT NUT 3 TGUC000000000 HEAVY SADDLE 29

TGNC0LUF00000 PIPE HANGER WITH EPDM LINING 4 TGSF000000000 SADDLE FLANGE 30

TGNC000U00000 PIPE HANGER WITHOUT LINING 5 TGAS000000000 OFFSET HANGER 30

TGNC0L0000000 PIPE HANGER WITH EPDM LINING 6 TGTPC00000000 STRUT CLAMP-TWO PIECE 31
CHANNELS CLIP

TGNC000000000 PIPE HANGER 7-8 TGPRS00000000 PIPE ROLLER STAND 32

TGHNCL0000000 PIPE HANGER HEAVY DUTY 9 TGPRC00000000 PIPE ROLLER CHAIR 33

TGENCL0000000 EASY FIX PIPE HANGER EPDM LINING 10 TGARH00000000 ADJUSTABLE ROLLER HANGER 34

TGLNCL0000000 PIPE HANGER WITH LINING - STUD 11 TGPR000000000 PIPE ROLLER WITH SOCKET 35

TGLNC00000000 PIPE HANGER WITHOUT LINING - STUD 12 TGPIS00000000 PIPE INSULATION SADDLE 36

TGTBC000E0000 TWO BOLT PIPE CLAMPS 13 TGPCS00000000 PIPE COVERING SADDLE 37

TGTBCL0000000 TWO BOLT PIPE CLAMPS WITH LINING 14 TGSP000000000 SLIDING PIPE SUPPORT 38

TGDNCL0000000 DOUBLE PIPE HANGER WITH LINING 15 TGPCS00000000 PIPE CLAMP WITH SLEEVE 39

TGSR000000000 SURGE RESTRAINER 15

TGRSI00000000 RUBBER SUPPORT INSERTS 40-43

TGUS000000000 U STRAP 16 TGSPH00000000 SPRING HANGER 44

TGUS0L0000000 U STRAP WITH LINING 18-19 TGCSM00000000 CLOSE SPRING MOUNT 45-46

TGRC000000000 RISER CLAMPS 20

TGOSM00000000 OPEN SPRING MOUNT 47-48

TGRC0L0000000 RISER CLAMPS WITH LINING 21

TGIB000000000 INERTIA BASE 49-50

TGFBC00000000 RISER CLAMPS FOUR BOLTS 22

TGRH000000000 RUBBER HANGER 51

TGTHC00000000 THREE BOLT PIPE CLAMP 23

TGDM000000000 DUCT MOUNT 52

TGOPC00000000 OFFSET PIPE CLAMP 24

TGTM000000000 TURRET MOUNT 53

TGUB00U000000 U BOLT 25 TGAVP00000000 ANTI VIBRATION PADS 54-55

TGSAF00000000 SINGLE ARC FLOATING FLANGE 56

TGUB0L0000000 U BOLT WITH LINING 26
EXPANSION JOINT
LIST OF CONTENTS

TGDAF00000000 DOUBLE ARC FLOATING FLANGE 57 TGDWA00000000 DRAW IN ANCHOR 116

EXPANSION JOINT

TGREJ00000000 RUBBER EXPANSION JOINTS 58-59 TGWA000000000 WEDGE ANCHOR 117

TGTFC00000000 FLEXIBLE PIPE CONNECTORS 60-61 TGFB000000000 FOUNDATION BOLT 118

TGMEB00000000 METALLIC EXPANSION JOINTS 62-63

TGCA000000000 ACCESSORY SERIES 119

TGFMC00000000 FLEXIBLE METALLIC HOSE 64-66

CONNECTOR
TGBC000000000 BEAM CLAMP 120-123

TGDEUFF000000 DIELECTRIC UNION & FLANGES 67-75

TGCF000000000 CEILING FLANGE 124

TGSCHO0000000 STRUT CHANNELS 76-78

TGWBA00000000 WELDING BEAM ATTACHMENT 125-126
TGCW000000000 CHANNEL WASHER 79

TGCPN00000000 COUPLING NUT 79 TGSLP00000000 SINGLE LUG PLATE 127

TGRN000000000 RAIL NUT 80 TGCRP00000000 CONCRETE ROD ATTACHMENT 128-129

PLATE

TGCA000000000 CANTILEVER ARMS 81-82

TGFD000000000 FLOOR DRAINS 130-134

TGWBC00000000 WALL BRACKET FOR CHANNEL 83

TGTPA00000000 TEST PLUG & AIR VENT 135-136

TGPC000000000 PROTECTION CAPS 83

INSTALLATION INSTRUCTION 137-140

TGHC000000000 HINGE CONNECTOR 84 TESTING OF PRODUCT

TGDCA00000000 LIGHT WELDED STEEL BRACKET 86

TGDCA00000000 FLAT PLATE FITTINGS & 87-89

ANGLE FITTINGS

TGTR000000000 THREADED ROD 90-91

TGSB000000000 STUD BOLTS 92

TGAB000000000 ANCHOR BOLTS 93-94

TGHB000000000 HEX BOLTS 95-101

TGSS000000000 SOCKET SCREWS 102-104

TGF0000000000 NUTS 105-109

TGF0000000000 WASHERS 110-115

TGDPA00000000 DROP IN ANCHORS 116

 MATERIAL SCHEDULE‐FIRE FIGHTING

SR. NO Product Name PRODUCT CODE MAKE COUNTRY OF ORIGIN PRODUCT IMAGE FINISH

1 SPRINKLER HANGER TGSHN00 TEMBO SEVENSTAR INDIA HDG/GI

2 RISER CLAMPS TGRC00 TEMBO SEVENSTAR INDIA HDG/GI

3 CLEVIS HANGER TGCH00 TEMBO SEVENSTAR INDIA HDG/GI

4 U BOLT TGUB00 TEMBO SEVENSTAR INDIA HDG/GI

6 STRUT CHANNELS TGSCH0 TEMBO SEVENSTAR INDIA HDG/GI

7 CANTILEVER ARMS TGCA00 TEMBO SEVENSTAR INDIA HDG/GI

10 THREADED ROD TGTR00 TEMBO SEVENSTAR INDIA HDG/GI

11 DROP IN ANCHOR TGDPA0 TEMBO SEVENSTAR INDIA HDG/GI

12 WEDGE ANCHOR TGWA00 TEMBO SEVENSTAR INDIA HDG/GI

13 HEX BOLT TGHB00 TEMBO SEVENSTAR INDIA HDG/GI

14 HEX NUT TGHN00 TEMBO SEVENSTAR INDIA HDG/GI

15 FLAT WASHER TGFW00 TEMBO SEVENSTAR INDIA HDG/GI

16 THREADED ROD  TGTR00 TEMBO SEVENSTAR INDIA HDG/GI

17 HOLLOW CORE ANCHOR  R‐HSA TEMBO SEVENSTAR INDIA HDG/GI

18 BEAM CLAMP  TG‐BC TEMBO SEVENSTAR INDIA HDG/GI

19 SQUARE BOLT BEAM CLAMP TG‐SBC TEMBO SEVENSTAR INDIA HDG/GI

20 C‐CHANNEL TEMBO TEMBO SEVENSTAR INDIA HDG/GI

21 L‐ANGLE  TEMBO TEMBO SEVENSTAR INDIA HDG/GI

 MATERIAL SCHEDULE‐DUCT SUPPORTS & CHILLED WATER (HVAC)

SR. NO Product Name PRODUCT CODE MAKE COUNTRY OF ORIGIN PRODUCT IMAGE FINISH

1 U STRAP TGUS00 TEMBO SEVENSTAR INDIA GI/HDG

2 U STRAP WITH LINING TGUS0L TEMBO SEVENSTAR INDIA GI/HDG

3 U BOLT  TGUB00 TEMBO SEVENSTAR INDIA GI/HDG

4 U BOLT WITH LINING TGUB0L TEMBO SEVENSTAR INDIA GI/HDG

5 RUBBER SUPPORT INSERTS TGRSI0 TEMBO SEVENSTAR INDIA ‐

6 STRUT CHANNELS TGSCH0 TEMBO SEVENSTAR INDIA GI/HDG

7 CANTILEVER ARMS TGCA00 TEMBO SEVENSTAR INDIA GI/HDG

8 THREADED ROD TGTR00 TEMBO SEVENSTAR INDIA GI/HDG

9 DROP IN ANCHOR TGDPA0 TEMBO SEVENSTAR INDIA GI/HDG

10 WEDGE ANCHOR TGWA00 TEMBO SEVENSTAR INDIA GI/HDG

11 HEX BOLT TGHB00 TEMBO SEVENSTAR INDIA GI/HDG

12 HEX NUT TGHN00 TEMBO SEVENSTAR INDIA GI/HDG

13 FLAT WASHER TGFW00 TEMBO SEVENSTAR INDIA GI/HDG

16 THREADED ROD  TGTR00 TEMBO SEVENSTAR INDIA HDG/GI

17 HOLLOW CORE ANCHOR  R‐HSA TEMBO SEVENSTAR INDIA HDG/GI

18 BEAM CLAMP  TG‐BC TEMBO SEVENSTAR INDIA HDG/GI

19 SQUARE BOLT BEAM CLAMP TG‐SBC TEMBO SEVENSTAR INDIA HDG/GI

20 C‐CHANNEL TEMBO TEMBO SEVENSTAR INDIA HDG/GI

21 L‐ANGLE  TEMBO TEMBO SEVENSTAR INDIA HDG/GI

 MATERIAL SCHEDULE‐PLUMBING & DRAINAGE 

COUNTRY OF 
SR. NO. PRODUCT NAME  PRODUCT CODE MAKE PRODUCT IMAGE  PRODUCT FINISH
ORIGIN

PIPE HANGER WITH EPDM 
1 TGNC0L TEMBO SEVENSTAR INDIA GI/HDG
LINING

PIPE HANGER WITHOUT 
2 TGNC00 TEMBO SEVENSTAR INDIA GI/HDG
LINING

3 U STRAP TGUS00 TEMBO SEVENSTAR INDIA GI/HDG

4 U STRAP WITH LINING TGUS0L TEMBO SEVENSTAR INDIA GI/HDG

5 RISER CLAMP TGRC00 TEMBO SEVENSTAR INDIA GI/HDG

6 U Bolt TGUB00 TEMBO SEVENSTAR INDIA GI/HDG

11 STRUT CHANNEL TGSCH0 TEMBO SEVENSTAR INDIA GI/HDG

12 THREADED ROD TGTR00 TEMBO SEVENSTAR INDIA GI/HDG

13 HEX BOLT TGHB00 TEMBO SEVENSTAR INDIA GI/HDG

14 HEX NUT TGHN00 TEMBO SEVENSTAR INDIA GI/HDG

15 FLAT WASHER TGFW00 TEMBO SEVENSTAR INDIA GI/HDG

16 DROP IN ANCHOR TGDPA0 TEMBO SEVENSTAR INDIA GI

17 WEDGE ANCHOR TGWA00 TEMBO SEVENSTAR INDIA GI/HDG

18 L ANGLE TEMBO TEMBO SEVENSTAR INDIA HDG/GI

19 C CHANNEL TEMBO TEMBO SEVENSTAR INDIA HDG/GI

20 THREADED ROD  TGTR00 TEMBO SEVENSTAR INDIA HDG/GI

21 HOLLOW CORE ANCHOR  R‐HSA TEMBO SEVENSTAR INDIA HDG/GI

22 BEAM CLAMP  TG‐BC TEMBO SEVENSTAR INDIA HDG/GI

23 SQUARE BOLT BEAM CLAMP TG‐SBC TEMBO SEVENSTAR INDIA HDG/GI

1 CLEVIS HANGER TGCH0UF000000

S
R

B
H
APPLICATION: MATERIAL:
A CLEVIS HANGER provides for sizeable loads to be supported Mild Steel. Also other materials can be provided on request
and for an elevation adjustment depending upon the pipe
diameter. The lower nut adjusts the piping to the proper APPROVALS:
elevation and the upper nut, when locked into position,
prevents loosening due to vibration.
ANSI/MSS SP-58 & SP-69(Type 1) MSS
CONSTRUCTION:
Since 1924 R

Federal Specification WW-H-171E & A-A-1192A(Type 1)

A CLEVIS HANGER consists of a yoke and a support strap made
from shaped Mild steel strip and a joining bolt. 15° swing in MAXIMUM TEMPERATURE: 343°C(650°F)
either direction allows pipe to easily feed through. Pipe will not
pinch when installing. Engineered design aligns bolt holes for FINISH AVAILABLE:
quicker overhead installation. Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake
& Epoxy Coated.

PIPE OD MATERIAL DIMENSION (MM) HANGER ROD CROSS BOLT

PRODUCT CODE NOMINAL PIPE SIZE (MM) HEIGHT TOP HOLE DIA. SIZE (MM) DIA. (CRD ) MAX LOAD
IN. MM D H S R (KG)
TGCH0U00E0022 1/ 2” DN15 21.3 68 11 M10 M8 350
TGCH0UF0E0027 3/ 4” DN20 26.7 72 11 M10 M8 350
TGCH0UF0E0034 1” DN25 33.4 76 11 M10 M8 350
TGCH0UF0E0042 1 1/ 4” DN32 42.1 87 11 M10 M8 350
TGCH0UF0E0048 1 1/ 2” DN40 48.2 97 11 M10 M8 350
TGCH0UF0E0060 2” DN50 60.3 114 11 M10 M8 350
TGCH0UF0E0073 2 1/ 2” DN65 73.0 142 13 M12 M10 780
TGCH0UF0E0089 3” DN80 88.9 165 13 M12 M10 780
TGCH0UF0E0114 4” DN100 114.3 202 13 M12 M10 780
TGCH0UF0E0141 5” DN125 141.3 236 13 M12 M12 1250
TGCH0UF0E0168 6” DN150 168.3 278 13 M12 M12 1250
TGCH0UF0E0219 8” DN200 219.1 338 13 M12 M12 2100
TGCH0UF0E0273 10” DN250 273.1 419 17 M16 M16 2100
TGCH0UF0E0323 12” DN300 323.8 490 21 M20 M20 2100
TGCH0UF0E0356 14” DN350 355.6 556 21 M20 M20 3800
TGCH0UF0E0406 16” DN400 406.4 610 25 M24 M20 3800
TGCH0UF0E0457 18” DN450 457.2 675 25 M24 M24 4000
TGCH0UF0E0508 20” DN500 508.0 715 32 M30 M24 4000
TGCH0UF0E0610 24” DN600 609.6 850 32 M30 M24 9400
TGCH0UF0E0762 30” DN750 762.0 995 32 M30 M24 9400

APPLICATION EXAMPLES:
 TGSHNUF000000 SPRINKLER HANGER WITH NUT
2

WITH
SPRINKLER
NUT

H
D

APPLICATION: MATERIAL:
A SPRINKLER HANGER recommended to provide vertical Mild Steel. Also other materials can be provided on request
support to non insulated piping systems. By adjusting the
position of the sprinkler nut on the hanger rod at the top APPROVALS:
of the hanger, pipe elevation can be altered.
ANSI/MSS SP-58 & SP-69(Type 10) MSS Since 1924 R

Federal Specification WW-H-171E & A-A-1192A(Type 10)

CONSTRUCTION:
A SPRINKLER HANGER consists of a piece of mild steel MAXIMUM TEMPERATURE: 343°C(650°F)
shaped to support pipe. Gives Double thickness at the
support. Most suitable for fire extinguishing pipes FINISH AVAILABLE:
installation. Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake
& Epoxy Coated.

NOMINAL PIPE SIZE PIPE OD (MM) HEIGHT HANGER ROD SIZE (MM) MAX LOAD
PRODUCT CODE (KG)
IN. MM D H R

TGSHNUF0E0027 3/4” DN20 26.7 61 M10 220

TGSHNUF0E0034 1" DN25 33.4 70 M10 220

TGSHNUF0E0042 1 1/4” DN32 42.1 78 M10 220

TGSHNUF0E0048 1 1/2” DN40 48.2 84 M10 220

TGSHNUF0E0060 2” DN50 60.3 102 M10 220

TGSHNUF0E0073 2 1/2” DN65 73.0 118 M10 300

TGSHNUF0E0089 3” DN80 88.9 144 M10 300

TGSHNUF0E0114 4” DN100 114.3 176 M10 300

TGSHNUF0E0168 6” DN150 168.3 262 M12 550

TGSHNUF0E0219 8” DN200 219.1 305 M12 1300

APPLICATION EXAMPLES:
 TGNC0L0000000 PIPE HANGER WITH EPDM LINING
6

APPLICATION: MATERIAL:
PIPE HANGER WITH EPDM LINING is recommended for non- Mild Steel. Also other materials can be provided on request
insulated stationary pipelines in a horizontal position. It
can be used for supporting pipes along with the roof.
MAXIMUM TEMPERATURE: -20°C - 110°C
CONSTRUCTION:
PIPE HANGER with EPDM lining consists of piece of mild
steel shaped to wrap around the pipe. The selection of the FINISH AVAILABLE:
proper PIPE HANGER WITH EPDM LINING depends upon Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.
the temperature of the piping system and load to be
carried. Permits installation before and after pipe is in
place. Reduces noise upto 18 dB.

NOMINAL PIPE SIZE PIPE OD RANGE NUT SIZE SIDE SCREW MAX LOAD
PRODUCT CODE
IN. MM (MM) (MM) (A) SIZE (KG)
TGNC0L00E0017 3/8” DN10 17.1 15-19 M8 X M10 M6 450
TGNC0L00E0022 1/2” DN15 21.3 20-25 M8 X M10 M6 450
TGNC0L00E0027 3/4” DN20 26.7 26-30 M8 X M10 M6 450
TGNC0L00E0034 1" DN25 33.4 32-36 M8 X M10 M6 450
TGNC0L00E0042 1 1/4” DN32 42.1 38-43 M8 X M10 M6 450
TGNC0L00E0048 1 1/2” DN40 48.2 47-51 M8 X M10 M6 450
TGNC0L00E0054 - 54 53-58 M8 X M10 M6 450
TGNC0L00E0060 2" DN50 60.3 60-64 M8 X M10 M6 450
TGNC0L00E0070 - 70 68-72 M8 X M10 M6 450
TGNC0L00E0073 2 1/2” DN65 73.0 74-80 M8 X M10 M6 600
TGNC0L00E0083 - 83 81-86 M8 X M10 M6 600
TGNC0L00E0089 3" DN80 88.9 87-92 M8 X M10 M6 600
TGNC0L00E0102 3 1/2” DN90 101.6 99-105 M8 X M10 M6 600
TGNC0L00E0110 - 110 107-112 M8 X M10 M6 600
TGNC0L00E0114 4" DN100 114.3 113-118 M8 X M10 M6 600
TGNC0L00E0125 - 125 125-130 M8 X M10 M6 600
TGNC0L00E0141 5” DN125 141.3 138-142 M8 X M10 M6 600
TGNC0L00E0160 - 160 159-166 M8 X M10 M6 600
TGNC0L00E0168 6" DN150 168.3 168-172 M8 X M10 M8 600
TGNC0L00E0219 8” DN200 219.1 215-220 M8 X M10 M8 950
TGNC0L00E0273 10” DN250 273.0 269-274 M8 X M10 M8 950

APPLICATION EXAMPLES:
 PIPE HANGER WITH EPDM LINING

APPLICATION: MATERIAL:
PIPE HANGER WITH EPDM LINING is recommended for non-insulated Mild Steel. Also other materials can be provided on request
stationary pipelines in a horizontal position. It can be used for
supporting pipes along with the roof.
CONSTRUCTION: MAXIMUM TEMPERATURE: -20°C - 110°C
PIPE HANGER with EPDM lining consists of piece of mild steel
shaped to wrap around the pipe. The selection of the proper FINISH AVAILABLE:
PIPE HANGER WITH EPDM LINING depends upon the temperature
of the piping system and load to be carried. Permits installation Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.
before and after pipe is in place. Reduces noise upto 18 dB.

SUITABILITY FOR COMMONLY USED SIZES OF DIFFERENT TYPES OF PIPES

FIXING NUT STEEL COPPER PVC/PPR/ABS CAST IRON MAX LOAD
PRODUCT CODE
SIZE NOMINAL OUTER DIA (MM) OUTER DIA (MM) NOMINAL (KG)
TGNC0L00E0017 M8 + M10 - 12,13,15 16 125
TGNC0L00E0022 M8 + M10 1/2" 18,19,22 17,20,21 125
TGNC0L00E0027 M8 + M10 3/4" 28,29 25,27 125
TGNC0L00E0034 M8 + M10 1" 35 32,33 125
TGNC0L00E0042 M8 + M10 1 1/4" 41,42 40,42 125
TGNC0L00E0048 M8 + M10 1 1/2" 48,50 1 1/2" 125
TGNC0L00E0054 M8 + M10 - 54 125
TGNC0L00E0060 M8 + M10 2" 60-63 2" 125
TGNC0L00E0070 M8 + M10 - 67 125
TGNC0L00E0073 M8 + M10 2 1/2" 76,79 75 125
TGNC0L00E0089 M8 + M10 3" 88 3" 150
TGNC0L00E0102 M8 + M10 - 92 90 150
TGNC0L00E0110 M8 + M10 - 105,108 150
TGNC0L00E0114 M8 + M10 4" 110,114 4" 150
TGNC0L00E0125 M10 - 125 200
TGNC0L00E0133 M10 - 130,133 5" 200
TGNC0L00E0141 M10 5" 140 200
TGNC0L00E0156 M10 - 156 200
TGNC0L00E0168 M10 6" 159 160-168 6" 200
TGNC0L00E0180 M10 - 180 200
TGNC0L00E0206 M10 - 206 200 200
TGNC0L00E0219 M10 8" 219 219 8" 200
TGNC0L00E0225 M12 - 225 300
TGNC0L00E0250 M12 - 257 250 300
TGNC0L00E0273 M12 10" 267 273 10" 300
TGNC0L00E0323 M12 12" 308 315,323 12" 300

APPLICATION EXAMPLES:
7 PIPE HANGER TGNC000000000

APPLICATION: MATERIAL:
PIPE HANGER is recommended for non-insulated stationary Mild Steel. Also other materials can be provided on request
pipelines in a horizontal position. It can be used for suppor-
ting pipes along with the roof. MAXIMUM TEMPERATURE: -343°C (650°F)
CONSTRUCTION: FINISH AVAILABLE:
PIPE HANGER consists of piece of mild steel shaped to wrap Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.
around the pipe. The selection of the proper 3 BOLT PIPE CLAMP
depends upon the temperature of the piping system and load
to be carried. Permits installation before and after pipe is in
place.

NOMINAL PIPE SIZE PIPE OD RANGE NUT SIZE SIDE SCREW MAX LOAD
PRODUCT CODE
IN. MM (MM) (MM) (A) SIZE (KG)
TGNC0000E0017 3/8” DN10 17.1 15-19 M8 X M10 M6 450
TGNC0000E0022 1/ 2” DN15 21.3 20-25 M8 X M10 M6 450
TGNC0000E0027 3/ 4” DN20 26.7 26-30 M8 X M10 M6 450
TGNC0000E0034 1" DN25 33.4 32-36 M8 X M10 M6 450
TGNC0000E0042 1 1/ 4” DN32 42.1 38-43 M8 X M10 M6 450
TGNC0000E0048 1 1/ 2” DN40 48.2 47-51 M8 X M10 M6 450
TGNC0000E0054 - - 54 53-58 M8 X M10 M6 450
TGNC0000E0060 2" DN50 60.3 60-64 M8 X M10 M6 450
TGNC0000E0070 - - 70 68-72 M8 X M10 M6 450
TGNC0000E0073 2 1/ 2” DN65 73.0 74-80 M8 X M10 M6 600
TGNC0000E0083 - - 83 81-86 M8 X M10 M6 600
TGNC0000E0089 3" DN80 88.9 87-92 M8 X M10 M6 600
TGNC0000E0102 3 1/ 2” DN90 101.6 99-105 M8 X M10 M6 600
TGNC0000E0110 - - 110 107-112 M8 X M10 M6 600
TGNC0000E0114 4" DN100 114.3 113-118 M8 X M10 M6 600
TGNC0000E0125 - - 125 125-130 M8 X M10 M6 600
TGNC0000E0141 5” DN125 141.3 138-142 M8 X M10 M6 600
TGNC0000E0160 - - 160 159-166 M8 X M10 M6 600
TGNC0000E0168 6" DN150 168.3 168-172 M8 X M10 M8 600
TGNC0000E0219 8” DN200 219.1 215-220 M8 X M10 M8 950
TGNC0000E0273 10” DN250 273.0 269-274 M8 X M10 M8 950
NOTE : Pipe Hanger of all Non Standard Sizes to fit upon Rubber Support Insert can be manufactured.

APPLICATION EXAMPLES:
 ABS = Acrylonitrile-Butadiene-Styrene
UPVC = unplasticized polyvinyl chloride
pe = Polyethylene

SELECTION TABLE FOR DIFFERENT TYPES OF PIPES

NPS Pipe outside uPVC/ PE ABS Copper

(in) Dia(mm) (mm) (mm) (mm)

- 16 - - 15,18
1/2" 22 20 DN15(21.4) 22
3/4" 28 25 DN20(26.8) 24, 28
1" 35 32, 38 DN25(33.6) 35
1 1/4" 42 40, 43 DN32(42.3) 42
1 1/2" 48 45 DN40(48.3) -
- - 54 - 54
2" 60 60 DN50(60.4) 64
- - - - -
- - 70 67, 70
2 1/2" 75 75 DN65(75.4) 76
- - 83 - 80
3" 90 90 - -
- - 102 DN80(88.9) 102, 105
- - 110 - 108
4" 115 115 DN100(114.3) -
- - 125 - 125
- - 135 - -
5" 140 140 DN125(121.4) -
- - 152 - -
- - 160 - 159
6" 168 - DN150(168.3) 167
- - 200 - 206
8" 219 220, 225 DN200(225.0) -
- - 250 DN225(250.4) -
- - - DN300(315.5) -

APPLICATION EXAMPLES:
 TGUS000000000 U STRAP
16

APPLICATION:
A standard pipe strap is recommended for supporting a piping system with fittings vertically or horizontally to walls
or ceilings. It can be used as a restrainer when installed on top of structural wood beams for beam, for limiting pipe
movements due to thrust loads during sprinkler system start-up.

CONSTRUCTION:
A standard Pipe Strap consists of a piece of mild steel shaped to hold the pipe down to walls or ceilings.

MATERIAL:
Mild Steel. Also other materials can be provided on request

APPROVALS:

ANSI/MSS SP-58 & SP-69 (Type 26) MSS Since 1924 R

Federal Specification WW-H-171E & A-A-1192A (Type 26)

MAXIMUM TEMPERATURE: 343°C (650°F)

FINISH AVAILABLE:
Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, & Epoxy Coated.

APPLICATION EXAMPLES:
 HANGER DIMENSION (MM)
OVERALL DISTANCE BETWEEN
PRODUCT NOMINAL PIPE SIZE PIPE OD DIMENSION TWO BOLT BOLT SIZE MAX LOAD
CODE IN. MM (MM) A B (MM) (KG)

TGUS0000E0022 1/2” DN15 21.3 76 51 M8 500

TGUS0000E0027 3/4” DN20 26.7 82 57 M8 500
TGUS0000E0034 1” DN25 33.4 89 64 M8 500
TGUS0000E0042 1 1/4” DN32 42.1 96 71 M8 500
TGUS0000E0048 1 1/2” DN40 48.2 102 77 M8 500
TGUS0000E0054 - - 54 108 83 M8 500
TGUS0000E0060 2” DN50 60.3 114 89 M8 500
TGUS0000E0067 - - 67 121 96 M8 500
TGUS0000E0073 2 1/2” DN65 73.0 145 113 M8 600
TGUS0000E0082 - - 82 152 120 M8 600
TGUS0000E0089 3” DN80 88.9 160 128 M8 600
TGUS0000E0102 3 1/2” DN90 101.6 170 138 M8 600
TGUS0000E0108 - - 108 178 146 M8 00
6
TGUS0000E0114 4” DN100 114.3 185 153 M8 600
TGUS0000E0126 - - 126 196 16
4 M8 6
00
TGUS0000E0141 5" DN125 141.3 210 178 M10 600
TGUS0000E0148 - - 148 218 186 M10 00
6
TGUS0000E0155 - - 155 225 193 M10 600
TGUS0000E0168 6” DN150 168.3 237 205 M10 00
6
TGUS0000E0179 - - 179 249 217 M10 600
TGUS0000E0190 - - 190 260 228 M10 800
TGUS0000E0205 - - 205 275 243 M10 800
TGUS0000E0219 8” DN200 219.1 289 257 M10 800
TGUS0000E0230 - - 230 300 268 M10 800
TGUS0000E0241 - - 241 332 291 M12 1250
TGUS0000E0263 - - 263 354 313 M12 1250
TGUS0000E0273 10’’ DN250 273.0 364 323 M18 1250
TGUS0000E0295 - - 295 386 345 M18 1250
TGUS0000E0323 12” DN300 323.8 417 376 M18 1250
TGUS0000E0356 14” DN350 355.6 447 409 M18 1800
TGUS0000E0374 - - 374 465 427 M18 1800
TGUS0000E0406 16” DN400 406.4 497 459 M18 1800
TGUS0000E0432 - - 432 523 485 M18 1800
TGUS0000E0457 18” DN450 457.2 547 509 M18 1800
TGUS0000E0482 - - 482 573 535 M18 1800
TGUS0000E0508 20” DN500 508.2 599 561 M18 1800
TGUS0000E0533 - - 533 624 586 M18 1800
TGUS0000E0559 - - 559 650 612 M18 1800
TGUS0000E0583 - - 583 674 636 M18 1800
TGUS0000E0610 24” DN60
0 609.6 701 663 M18 1800
TGUS0000E0658 - - 658 766 721 M18 2300
TGUS0000E0690 - - 690 798 753 M18 2300
TGUS0000E0760 - - 760 868 823 M18 2300
TGUS0000E0863 - - 863 971 926 M18 2300
TGUS0000E0918 - - 918 1026 981 M18 2300

NOTE : U Strap of all Non Standard Sizes to fit upon Rubber Support Insert can be manufactured.
 TGUS0L0000000 U STRAP WITH LINING
18

APPLICATION:
A Standard PIPE STRAP WITH LINING is recommended for supporting a piping system with fittings vertically
or horizontally to walls or ceilings. It can be used as a restrainer when installed on top of structural wood
beams for beam, for limiting pipe movements due to thrust loads during sprinkler system start-up.

CONSTRUCTION:
A Standard PIPE STRAP WITH LINING consists of a single piece of mild steel shaped to hold the pipe down to
walls or ceilings. Reduces noise upto 18 dB.

MATERIAL:
Mild Steel. Also other materials can be provided on request.

APPROVALS:
ANSI/MSS SP-58 & SP-69 (Type 26) MSS Since 1924 R

Federal Specification WW-H-171E & A-A-1192A (Type 26)

MAXIMUM TEMPERATURE: -20°C to 110°C

FINISH AVAILABLE:
Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

APPLICATION EXAMPLES:
 HANGER DIMENSION (MM)
OVERALL DISTANCE BETWEEN
PRODUCT NOMINAL PIPE SIZE PIPE OD DIMENSION TWO BOLT BOLT SIZE MAX LOAD
CODE IN. MM (MM) A B (MM) (KG)

TGUS0L00E0022 1/2” DN15 21.3 76 51 M8 500

TGUS0L00E0027 3/4” DN20 26.7 82 57 M8 500
TGUS0L00E0034 1” DN25 33.4 89 64 M8 500
TGUS0L00E0042 1 1/4” DN32 42.1 96 71 M8 500
TGUS0L00E0048 1 1/2” DN40 48.2 102 77 M8 500
TGUS0L00E0054 - - 54 108 83 M8 500
TGUS0L00E0060 2” DN50 60.3 114 89 M8 500
TGUS0L00E0067 - - 67 121 96 M8 500
TGUS0L00E0073 2 1/2” DN65 73.0 145 113 M8 600
TGUS0L00E0082 - - 82 152 120 M8 600
TGUS0L00E0089 3” DN80 88.9 160 128 M8 600
TGUS0L00E0102 3 1/2” DN90 101.6 170 138 M8 600
TGUS0L00E0108 - - 108 178 146 M8 00
6
TGUS0L00E0114 4” DN100 114.3 185 153 M8 600
TGUS0L00E0126 - - 126 196 16
4 M8 00
6
TGUS0L00E0141 5" DN125 141.3 210 178 M10 600
TGUS0L00E0148 - - 148 218 186 M10 00
6
TGUS0L00E0155 - - 155 225 193 M10 600
TGUS0L00E0168 6” DN150 168.3 237 205 M10 00
6
TGUS0L00E0179 - - 179 249 217 M10 600
TGUS0L00E0190 - - 190 260 228 M10 800
TGUS0L00E0205 - - 205 275 243 M10 800
TGUS0L00E0219 8” DN200 219.1 289 257 M10 800
TGUS0L00E0230 - - 230 300 268 M10 800
TGUS0L00E0241 - - 241 332 291 M12 1250
TGUS0L00E0263 - - 263 354 313 M12 1250
TGUS0L00E0273 10’’ DN250 273.0 364 323 M18 1250
TGUS0L00E0295 - - 295 386 345 M18 1250
TGUS0L00E0323 12” DN300 323.8 417 376 M18 1250
TGUS0L00E0356 14” DN350 355.6 447 409 M18 1800
TGUS0L00E0374 - - 374 465 427 M18 1800
TGUS0L00E0406 16” DN400 406.4 497 459 M18 1800
TGUS0L00E0432 - - 432 523 485 M18 1800
TGUS0L00E0457 18” DN450 457.2 547 509 M18 1800
TGUS0L00E0482 - - 482 573 535 M18 1800
TGUS0L00E0508 20” DN500 508.2 599 561 M18 1800
TGUS0L00E0533 - - 533 624 586 M18 1800
TGUS0L00E0559 - - 559 650 612 M18 1800
TGUS0L00E0583 - - 583 674 636 M18 1800
TGUS0L00E0610 24” DN 600 609.6 701 663 M18 1800
TGUS0L00E0658 - - 658 766 721 M18 2300
TGUS0L00E0690 - - 690 798 753 M18 2300
TGUS0L00E0760 - - 760 868 823 M18 2300
TGUS0L00E0863 - - 863 971 926 M18 2300
TGUS0L00E0918 - - 918 1026 981 M18 2300
 TGRC00F000000 RISER CLAMP
20

APPLICATION: MATERIAL:
RISER CLAMPS are recommended for the support and / or Mild Steel. Also other materials can be provided on request
restraint of vertical steel pipes. A RISER CLAMP is designed
to attach to the pipe and to rest on a structural member or APPROVALS:
floor; It is not designed to have hanger rods attached to it
to support the pipe.
ANSI/MSS SP-58 & SP-69(Type 8) MSS Since 1924 R

CONSTRUCTION: Federal Specification WW-H-171E & A-A-1192A (Type 8)

RISER CLAMPS consists of two mild steel flat bars bent to
shape and held together by two bolts. Designed to act as MAXIMUM TEMPERATURE: 343°C (650°F)
a rigid support or guide vertical pipes. The clamp should be
bolted to the pipe just below support lugs or other attach- FINISH AVAILABLE:
ments that can carry a shear load. Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

LENGTH
BETWEEN
PRODUCT NOMINAL PIPE SIZE PIPE OD HOLE CENTRE BOLT SIZE MAX LOAD
CODE IN. MM (MM) (MM) (KG)

TGRC0000E0022 1/ 2” DN15 21.3 57 M10 1250

TGRC00F0E0027 3/ 4” DN20 26.7 68 M10 1250
TGRC00F0E0034 1” DN25 33.4 76 M10 1250
TGRC00F0E0042 1 1/ 4” DN32 42.1 90 M10 1250
TGRC00F0E0048 1 1/ 2” DN40 48.2 110 M10 1250
TGRC00F0E0060 2” DN50 60.3 130 M10 1850
TGRC00F0E0073 2 1/ 2” DN65 73.0 142 M12 1850
TGRC00F0E0089 3” DN80 88.9 161 M12 2250
TGRC00F0E0114 4” DN100 114.3 190 M12 3600
TGRC00F0E0168 6” DN150 168.3 258 M16 4500
TGRC0000E0219 8” DN200 219.1 333 M16 4500
TGRC0000E0273 10” DN250 273.0 409 M16 5800
TGRC0000E0323 12” DN300 323.8 467 M20 7300
TGRC0000E0406 16" DN400 406.4 583 M20 7300
TGRC0000E0508 20" DN500 508.0 708 M20 13400
TGRC0000E0610 24" DN600 609.6 833 M20 13400

Note : Riser Clamp of all Non Standard Sizes to fit upon Rubber Support Insert can be manufactured.

APPLICATION EXAMPLES:
21 RISER CLAMP WITH LINING TGRC0L0000000

APPLICATION: MATERIAL:
RISER CLAMPS WITH LINING are recommended for the Mild Steel. Also other materials can be provided on request
support and/or restraint of vertical steel pipes. A RISER
CLAMP with lining is designed to attach to the pipe and
to rest on a structural member or floor; It is not designed APPROVALS:
to have hanger rods attached to it to support the pipe. ANSI/MSS SP-58 & SP-69(Type 8) MSS Since 1924 R

Federal Specification WW-H-171E & A-A-1192A (Type 8)

CONSTRUCTION:
RISER CLAMPS WITH LINING consists of two mild steel flat MAXIMUM TEMPERATURE: -20°C to 110°C
bars bent to shape and held together by two bolts. Desig-
ned to act as a rigid support or guide for vertical pipes. FINISH AVAILABLE:
The clamp should be bolted to the pipe just below support
lugs or other attachments that can carry a shear load. Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.
Reduces noise upto 18dB.

LENGTH BETWEEN
PRODUCT NOMINAL PIPE SIZE PIPE OD HOLE CENTRE BOLT SIZE MAX LOAD
CODE IN. MM (MM) (MM) (KG)

TGRC0L00E0022 1/ 2” DN15 21.3 57 M10 1250

TGRC0L00E0027 3/ 4” DN20 26.7 68 M10 1250
TGRC0L00E0034 1” DN25 33.4 76 M10 1250
TGRC0L00E0042 1/14” DN32 42.1 90 M10 1250
TGRC0L00E0048 1/12” DN40 48.2 110 M10 1250
TGRC0L00E0060 2” DN50 60.3 130 M10 1850
TGRC0L00E0073 1/22” DN65 73.0 142 M12 1850
TGRC0L00E0089 3” DN80 88.9 161 M12 2250
TGRC0L00E0114 4” DN100 114.3 190 M12 3600
TGRC0L00E0168 6” DN150 168.3 258 M16 4500
TGRC0L00E0219 8” DN200 219.1 333 M16 4500
TGRC0L00E0273 10” DN250 273.0 409 M16 5800
TGRC0L00E0323 12” DN300 323.8 467 M20 7300
TGRC0L00E0406 16" DN400 406.4 583 M20 7300
TGRC0L00E0508 20" DN500 508.0 708 M20 13400
TGRC0L00E0610 24" DN600 609.6 833 M20 13400

Note : Riser Clamp of all Non Standard Sizes to fit upon Rubber Support Insert can be manufactured.

APPLICATION EXAMPLES:
25 U BOLT TGUB00U000000

APPLICATION: MATERIAL:
U-BOLTS are used to secure piping to structural members. When Mild Steel. Also other materials can be provided on request
the piping is below the structural member, the U-Bolt provides
vertical support and restricts lateral movement while allowing APPROVALS:
for axial movement. When the piping system is above the
structural member, the U-Bolt restricts lateral movement and
upward movement while allowing axial movement of the piping. ANSI/MSS SP-58 & SP-69(Type 24) MSS Since 1924 R

Federal Specification WW-H-171E & A-A-1192A (Type 24)

MAXIMUM TEMPERATURE: 399°C (750°F)
CONSTRUCTION:
U-Bolt is provided with four standard hex nuts and has a longer FINISH AVAILABLE:
straight threaded length. Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

MATERIAL DIMENSION
PIPE (MM) THREAD BOLT SIZE
PRODUCT NOMINAL PIPE SIZE OD ROD DIA. HEIGHT LENGTH (MM) MAX LOAD
CODE IN. MM (MM) W L T A (KG)
TGUB0000E0022 1/2” DN15 21.3 21 65 50 M10 550
TGUB00U0E0027 3/4” DN20 26.7 27 77 50 M10 550
TGUB00U0E0034 1” DN25 33.4 34 85 50 M10 550
TGUB00U0E0042 1 1/4” DN32 42.1 43 93 50 M10 550
TGUB00U0E0048 1 1/2” DN40 48.2 48 100 50 M10 550
TGUB00U0E0060 2” DN50 60.3 60 110 50 M10 550
TGUB00U0E0073 2 1/2” DN65 73.0 76 127 50 M12 900
TGUB00U0E0089 3” DN80 88.9 89 140 50 M12 900
TGUB00U0E0114 4” DN100 114.3 115 165 50 M12 900
TGUB00U0E0141 5” DN125 141.3 140 190 50 M12 900
TGUB00U0E0168 6” DN150 168.3 168 220 50 M12 900
TGUB0000E0219 8” DN200 219.1 219 295 75 M16 1900
TGUB0000E0273 10” DN250 273.0 273 370 100 M20 3200
TGUB0000E0323 12” DN300 323.8 324 420 100 M20 3200
TGUB0000E0356 14” DN350 355.6 356 455 100 M20 3200
TGUB0000E0406 16” DN400 406.4 406 505 100 M20 3200
TGUB0000E0457 18” DN450 457.2 457 555 100 M24 4400
TGUB0000E0508 20” DN500 508.0 508 605 100 M24 4400
TGUB0000E0610 24” DN600 609.6 610 710 100 M24 4400
Also can manufacture with different Rod size as per requirement.
NOTE : U bolt of all Non Standard Sizes to fit upon Rubber Support Insert can be manufactured.

APPLICATION EXAMPLES:
 TGUB0L0000000 U BOLT WITH LINING
26

APPLICATION: MATERIALS:
U-BOLTS WITH LINING are used to secure piping to Mild Steel. Also other materials can also be provided on request
structural members. When the piping is below the
structural member, U-BOLT WITH LINING provides APPROVALS:
vertical support and restricts lateral movement while
allowing for axial movement. When the piping system ANSI/MSS SP-69 & SP-58 (Type 24) MSSSince 1924 R

is above the structural member, the U-BOLTS WITH Federal Specification WW-H-171E & A-A-1192A (Type 24)
LINING restricts lateral movement and upward
movement while allowing axial movement of the MAXIMUM TEMPERATURE: 110°C
piping.
CONSTRUCTION: MINIMUM TEMPERATURE: -20°C
U-BOLTS WITH LINING is provided with four standard hex
nuts and has a longer straight threaded length. Reduces FINISH AVAILABLE:
noise upto 18dB. Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

MATERIAL DIMENSION
PIPE (MM) THREAD BOLT SIZE
PRODUCT NOMINAL PIPE SIZE OD ROD DIA. HEIGHT LENGTH (MM) MAX LOAD
CODE IN. MM (MM) W L T A (KG)
TGUB0L00E0022 1/2” DN15 21.3 21 65 50 M10 550
TGUB0L00E0027 3/4” DN20 26.7 27 77 50 M10 550
TGUB0L00E0034 1” DN25 33.4 34 85 50 M10 550
TGUB0L00E0042 1 1/4” DN32 42.1 43 93 50 M10 550
TGUB0L00E0048 1 1/2” DN40 48.2 48 100 50 M10 550
TGUB0L00E0060 2” DN50 60.3 60 110 50 M10 550
TGUB0L00E0073 2 1/2” DN65 73.0 76 127 50 M12 900
TGUB0L00E0089 3” DN80 88.9 89 140 50 M12 900
TGUB0L00E00114 4” DN100 114.3 115 165 50 M12 900
TGUB0L00E00141 5” DN125 141.3 140 190 50 M12 900
TGUB0L00E00168 6” DN150 168.3 168 220 50 M12 900
TGUB0L00E00219 8” DN200 219.1 219 295 75 M16 1900
TGUB0L00E00273 10” DN250 273.0 273 370 100 M20 3200
TGUB0L00E00323 12” DN300 323.8 324 420 100 M20 3200
TGUB0L00E00356 14” DN350 355.6 356 455 100 M20 3200
TGUB0L00E00406 16” DN400 406.4 406 505 100 M20 3200
TGUB0L00E00457 18” DN450 457.2 457 555 100 M24 4400
TGUB0L00E00508 20” DN500 508.0 508 605 100 M24 4400
TGUB0L00E00610 24” DN600 609.6 610 710 100 M24 4400
Also can manufacture with different Rod size as per requirement.
PVC Lining also available.

APPLICATION EXAMPLES:
 TGSF000000000 SADDLE FLANGE
30

SE-SF L41 SE-SF L82 SE-SF L124

MATERIAL: ITEM FOR PROFILR FUS

Mild Steel. Also other materials can be provided on request TGSF0000E0L41 21;41;21D;62
TGSF0000E0L82 41D
FINISH AVAILABLE: TGSF0000EL124 62D
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake. TGSF0000H0L41 21;41;21D;62
TGSF0000S0L41 FUS 21 + FUS 41

TGAS000000000 OFFSET HANGER

APPLICATION: MATERIALS:
OFFSET HANGER is recommended for support of pipe lines running Mild Steel. Also other materials can be provided on request
at a definite distance from the wall or floor of a building or structure.
Used where removing and installing of pipe is done periodically.
MAXIMUM TEMPERATURE: 343°C (650°F)
CONSTRUCTION:
An OFFSET HANGER consists of single piece of mild steel shaped to the FINISH AVAILABLE:
proper configuration. Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

PRODUCT NOMINAL PIPE SIZE PIPE OD DIMENSION

CODE INCH MM (MM) L W H
TGAS0000E0060 2" DN50 60.3 214 186 83
TGAS0000E0073 2 1/2 " DN65 73 269 231 113
TGAS0000E0089 3" DN80 88.9 284 246 113
TGAS0000E0110 - - 110 298 259 113
TGAS0000E0114 4" DN100 114.3 311 271 113
TGAS0000E0141 5" DN125 141.3 386 336 138
TGAS0000E0168 6" DN150 168.3 411 361 138
TGAS0000E0219 8" DN200 219.1 469 419 138
RUBBER SUPPORT INSERTS
40 RUBBER SUPPORT INSERTS TGRSI00000000

APPLICATION:
RUBBER SUPPORT INSERTS is recommended to use at the supporting points of insulated pipes to prevent crushing of insulation.

CONSTRUCTION:
Dimensionally accurate as each piece is moulded. It has excellent resistance to deterioration / distortion. Steel reinforcement
gives higher strength and load bearing capacity.

DENSITY : 1400kg/m3

THERMAL CONDUCTIVITY : 0.16W/m°C

TEMPERATURE RANGE : -20°C to 110°C

APPLICATION EXAMPLES:
 Nominal Schedule 40 Product Code for Rubber Support Insert
Pipe Size steel pipe 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3"
Inches mm OD (mm) 13 mm 19 mm 25 mm 32 mm 38 mm 50 mm 65 mm 75 mm

1/2" 15 21.3 TGRSI00221325 TGRSI00221925 TGRSI00222525 TGRSI00223225 TGRSI00223825 TGRSI00225025 TGRSI00226525 TGRSI00227525

3/4" 20 26.7 TGRSI00271325 TGRSI00271925 TGRSI00272525 TGRSI00273225 TGRSI00273825 TGRSI00275025 TGRSI00276525 TGRSI00277525

1" 25 33.4 TGRSI00341325 TGRSI00341925 TGRSI00342525 TGRSI00343225 TGRSI00343825 TGRSI00345025 TGRSI00346525 TGRSI00347525

1 1/4" 32 42.1 TGRSI00421325 TGRSI00421925 TGRSI00422525 TGRSI00423225 TGRSI00423825 TGRSI00425025 TGRSI00426525 TGRSI00427525

1 1/2" 40 48.2 TGRSI00481325 TGRSI00481925 TGRSI00482525 TGRSI00483225 TGRSI00483825 TURSI00485025 TGRSI00486525 TGRSI00487525

2" 50 60.3 TGRSI00601325 TGRSI00601925 TGRSI00602525 TGRSI00603225 TGRSI00603825 TGRSI00605025 TGRSI00606525 TGRSI00607525

2 1/2" 65 73.0 TGRSI00731338 TGRSI00731938 TGRSI00732538 TGRSI00733238 TGRSI00733838 TGRSI00735038 TGRSI00736538 TGRSI00737538

3" 80 88.9 TGRSI00891338 TGRSI00891938 TGRSI00892538 TGRSI00893238 TGRSI00893838 TGRSI00895038 TGRSI00896538 TGRSI00897538

3 1/2" 90 101.6 TGRSI01021338 TGRSI01021938 TGRSI01022538 TGRSI01023238 TGRSI01023838 TGRSI01025038 TGRSI01026538 TGRSI01027538

4" 100 114.3 TGRSI01141338 TGRSI01141938 TGRSI01142538 TGRSI01143238 TGRSI01143838 TGRSI01145038 TGRSI01146538 TGRSI01147538

5" 125 141.3 TGRSI01411338 TGRSI01411938 TGRSI01412538 TGRSI01413238 TGRSI01413838 TGRSI01415038 TGRSI01416538 TGRSI01417538

6" 150 168.3 TGRSI01681350 TGRSI01681950 TGRSI01682550 TGRSI01683250 TGRSI01683850 TGRSI01685050 TGRSI01686550 TGRSI01687550

8" 200 219.3 TGRSI02191350 TGRSI02191950 TGRSI02192550 TGRSI02193250 TGRSI02193850 TGRSI02195050 TGRSI02196550 TGRSI02197550

10" 250 273.0 TGRSI02731350 TGRSI02731950 TGRSI02732550 TGRSI02733250 TGRSI02733850 TGRSI02735050 TGRSI02736550 TGRSI02737550

12" 300 323.6 TGRSI03231350 TGRSI03231950 TGRSI03232550 TGRSI03233250 TGRSI03233850 TGRSI03235050 TGRSI03236550 TGRSI03237550

14" 350 355.6 TGRSI03561350 TGRSI03561950 TGRSI03562550 TGRSI03563250 TGRSI03563850 TGRSI03565050 TGRSI03566550 TGRSI03567550

16" 400 406.4 TGRSI04061350 TGRSI04061950 TGRSI04062550 TGRSI04063250 TGRSI04063850 TGRSI04065050 TGRSI04066550 TGRSI04067550

18" 450 457.2 TGRSI04571350 TGRSI04571950 TGRSI04572550 TGRSI04573250 TGRSI04573850 TGRSI04575050 TGRSI04576550 TGRSI04577550

20" 500 508.0 TGRSI05081350 TGRSI05081950 TGRSI05082550 TGRSI05083250 TGRSI05083850 TGRSI05085050 TGRSI05086550 TGRSI05087550

24" 600 609.6 TGRSI06101350 TGRSI06101950 TGRSI06102550 TGRSI06103250 TGRSI06103850 TGRSI06105050 TGRSI06106550 TGRSI06107550
SIZE OD RSI SIZE TOTAL OD SIZE OD RSI SIZE TOTAL OD

1/2 " 21.3 1/2" X 13mm X 25mm 47.3 1/2 " 21.3 1/2" X 19mm X 25mm 59.3
3/4 " 26.7 3/4 " X 13mm X 25mm 52.7 3/4 " 26.7 3/4 " X 19mm X 25mm 64.7
1" 33.4 1 " X 13mm X 25mm 59.4 1" 33.4 1 " X 19mm X 25mm 71.4
1 1/4" 42.1 1 1/4" X 13mm X 25mm 68.1 1 1/4" 42.1 1 1/4" X 19mm X 25mm 80.1
1 1/2" 48.2 1 1/2" X 13mm X 25mm 74.2 1 1/2" 48.2 1 1/2" X 19mm X 25mm 86.2
2" 60.3 2 " X 13mm X 25mm 86.3 2" 60.3 2 " X 19mm X 25mm 98.3
2 1/2 " 73 2 1/2 " X 13mm X 38mm 99 2 1/2 " 73 2 1/2 " X 19mm X 38mm 111
3" 88.9 3 " X 13mm X 38mm 114.9 3" 88.9 3 " X 19mm X 38mm 126.9
3 1/2 " 101.6 3 1/2 " X 13mm X 38mm 127.6 3 1/2 " 101.6 3 1/2 " X 19mm X 38mm 139.6
4" 114.3 4 " X 13mm X 38mm 140.3 4" 114.3 4 " X 19mm X 38mm 152.3
5" 141.3 5 " X 13mm X 38mm 167.3 5" 141.3 5 " X 19mm X 38mm 179.3
6" 168.3 6 " X 13mm X 50mm 194.3 6" 168.3 6 " X 19mm X 50mm 206.3
8" 219.1 8 " X 13mm X 50mm 245.1 8" 219.1 8 " X 19mm X 50mm 257.1
10 " 273 10 " X 13mm X 50mm 299 10 " 273 10 " X 19mm X 50mm 311
12 " 323.8 12 " X 13mm X 50mm 349.8 12 " 323.8 12 " X 19mm X 50mm 361.8
14 " 355.6 14 " X 13mm X 50mm 381.6 14 " 355.6 14 " X 19mm X 50mm 393.6
16 " 406.4 16 " X 13mm X 50mm 432.4 16 " 406.4 16 " X 19mm X 50mm 444.4
18 " 457.2 18 " X 13mm X 50mm 483.2 18 " 457.2 18 " X 19mm X 50mm 495.2
20 " 508 20 " X 13mm X 50mm 534 20 " 508 20 " X 19mm X 50mm 546
24 " 609.6 24 " X 13mm X 50mm 635.6 24 " 609.6 24 " X 19mm X 50mm 647.6

SIZE OD RSI SIZE TOTAL OD SIZE OD RSI SIZE TOTAL OD

1/2 " 21.3 1/2" X 25mm X 25mm 71.3 1/2 " 21.3 1/ 2" X 32mm X 25mm 85.3
3/4 " 26.7 3/4 " X 25mm X 25mm 76.7 3/4 " 26.7 3/4 " X 32mm X 25mm 90.7
1" 33.4 1 " X 25mm X 25mm 83.4 1" 33.4 1 " X 32mm X 25mm 97.4
1 1/4" 42.1 1 1/4" X 25mm X 25mm 92.1 1 1/4" 42.1 1 1/4" X32mm X 25mm 106.1
1 1/2" 48.2 1 1/2" X 25mm X 25mm 98.2 1 1/2" 48.2 1 1/ 2" X 32mm X 25mm 112.2
2" 60.3 2 " X 25mm X 25mm 110.3 2" 60.3 2 " X 32mm X 25mm 124.3
2 1/2
" 73 2 1/2 " X 25mm X 38mm 123 21/2" 73 2 1/2 " X 32mm X 38mm 137
3" 88.9 3 " X 25mm X 38mm 138.9 3" 88.9 3 " X 32mm X 38mm 152.9
3 1/2 " 101.6 3 1/2 " X 25mm X 38mm 151.6 31/2" 101.6 3 1/2 " X 32mm X 38mm 165.6
4" 114.3 4 " X 25mm X 38mm 164.3 4" 114.3 4 " X 32mm X 38mm 178.3
5" 141.3 5 " X 25mm X 38mm 191.3 5" 141.3 5 " X 32mm X 38mm 205.3
6" 168.3 6 " X 25mm X 50mm 218.3 6" 168.3 6 " X 32mm X 50mm 232.3
8" 219.1 8 " X 25mm X 50mm 269.1 8" 219.1 8 " X32mm X 50mm 283.1
10 " 273 10 " X 25mm X 50mm 323 10 " 273 10 " X 32mm X 50mm 337
12 " 323.8 12 " X 25mm X 50mm 373.8 12 " 323.8 12 " X 32mm X 50mm 387.8
14 " 355.6 14 " X 25mm X 50mm 405.6 14 " 355.6 14 " X 32mm X 50mm 419.6
16 " 406.4 16 " X 25mm X 50mm 456.4 16 " 406.4 16 " X32mm X 50mm 470.4
18 " 457.2 18 " X 25mm X 50mm 507.2 18 " 457.2 18 " X 32mm X 50mm 521.2
20 " 508 20 " X 25mm X 50mm 558 20 " 508 20 " X 32mm X 50mm 572
24 " 609.6 24 " X 25mm X 50mm 659.6 24 " 609.6 24 " X 32mm X 50mm 673.6
SIZE OD RSI SIZE TOTAL OD SIZE OD RSI SIZE TOTAL OD

1/2 " 21.3 1/2" X 38mm X 25mm 97.3 1/2 " 21.3 1/2" X 50mm X 25mm 121.3
3/4 " 26.7 3/4 " X 38mm X 25mm 102.7 3/4 " 26.7 3/4 " X 50mm X 25mm 126.7
1" 33.4 1 " X 38mm X 25mm 109.4 1" 33.4 1 " X 50mm X 25mm 133.4
1 1/4" 42.1 1 1/4" X 38mm X 25mm 118.1 1 1/4" 42.1 1 1/4" X 50mm X 25mm 142.1
1 1/2" 48.2 1 1/2" X 38mm X 25mm 124.2 1 1/2" 48.2 1 1/2" X 50mm X 25mm 148.2
2" 60.3 2 " X 38mm X 25mm 136.3 2" 60.3 2 " X 50mm X 25mm 160.3
2 1/2 " 73 2 1/2 " X 38mm X 38mm 149 2 1/2 " 73 2 1/2 " X 50mm X 38mm 173
3" 88.9 3 " X 38mm X 38mm 164.9 3" 88.9 3 " X 50mm X 38mm 188.9
3 1/2 " 101.6 3 1/2 " X 38mm X 38mm 177.6 3 1/2 " 101.6 3 1/2 " X 50mm X 38mm 201.6
4" 114.3 4 " X 38mm X 38mm 190.3 4" 114.3 4 " X 50mm X 38mm 214.3
5" 141.3 5 " X 38mm X 38mm 217.3 5" 141.3 5 " X 50mm X 38mm 241.3
6" 168.3 6 " X 38mm X 50mm 244.3 6" 168.3 6 " X 50mm X 50mm 268.3
8" 219.1 8 " X 38mm X 50mm 295.1 8" 219.1 8 " X 50mm X 50mm 319.1
10 " 273 10 " X 38mm X50mm 349 10 " 273 10 " X 50mm X 50mm 373
12 " 323.8 12 " X 38mm X 50mm 399.8 12 " 323.8 12 " X 50mm X 50mm 423.8
14 " 355.6 14 " X 38mm X 50mm 431.6 14 " 355.6 14 " X 50mm X 50mm 455.6
16 " 406.4 16 " X 38mm X 50mm 482.4 16 " 406.4 16 " X 50mm X 50mm 506.4
18 " 457.2 18 " X 38mm X 50mm 533.2 18 " 457.2 18 " X 50mm X 50mm 557.2
20 " 508 20 " X 38mm X 50mm 584 20 " 508 20 " X 50mm X 50mm 608
24 " 609.6 24 " X 38mm X 50mm 685.6 24 " 609.6 24 " X 50mm X 50mm 709.6

SIZE OD RSI SIZE TOTAL OD SIZE OD RSI SIZE TOTAL OD

1/2 " 21.3 1/2" X 65mm X 25mm 151.3 1/2 " 21.3 1/2" X 75mm X 25mm 171.3
3/4 " 26.7 3/4 " X 65mm X 25mm 156.7 3/4 " 26.7 3/4 " X 75mm X 25mm 176.7
1" 33.4 1 " X 65mm X 25mm 163.4 1" 33.4 1 " X 75mm X 25mm 183.4
1 1/4" 42.1 1 1/4" X 65mm X 25mm 172.1 1 1/4" 42.1 1 1/4" X 75mm X 25mm 192.1
1 1/2" 48.2 1 1/2" X 65mm X 25mm 178.2 1 1/2" 48.2 1 1/2" X 75mm X 25mm 198.2
2" 60.3 2 " X 65mm X 25mm 190.3 2" 60.3 2 " X 75mm X 25mm 210.3
73 2 1/2" X 65mm X 38mm 203 2 1/2 " 73 2 1/2 " X 75mm X 38mm 223
3" 88.9 3 " X 65mm X 38mm 218.9 3" 88.9 3 " X 75mm X 38mm 238.9
101.6 3 1/2" X 65mm X 38mm 231.6 3 1/2 " 101.6 3 1/2 " X 75mm X 38mm 251.6
4" 114.3 4 " X 65mm X 38mm 244.3 4" 114.3 4 " X 75mm X 38mm 264.3
5" 141.3 5 " X 65mm X 38mm 271.3 5" 141.3 5 " X 75mm X 38mm 291.3
6" 168.3 6 " X 65mm X 50mm 298.3 6" 168.3 6 " X 75mm X 50mm 318.3
8" 219.1 8 " X 65mm X 50mm 349.1 8" 219.1 8 " X 75mm X 50mm 369.1
10 " 273 10 " X 65mm X 50mm 403 10 " 273 10 " X 75mm X 50mm 423
12 " 323.8 12 " X 65mm X 50mm 453.8 12 " 323.8 12 " X 75mm X 50mm 473.8
14 " 355.6 14 " X 65mm X 50mm 485.6 14 " 355.6 14 " X 75mm X 50mm 505.6
16 " 406.4 16 " X 65mm X 50mm 536.4 16 " 406.4 16 " X 75mm X 50mm 556.4
18 " 457.2 18 " X 65mm X 50mm 587.2 18 " 457.2 18 " X 75mm X 50mm 607.2
20 " 508 20 " X 65mm X 50mm 638 20 " 508 20 " X 75mm X 50mm 658
24 " 609.6 24 " X 65mm X 50mm 739.6 24 " 609.6 24 " X 75mm X 50mm 759.6
CHANNEL SUPPORT
 TGSCHOP000000 STRUT CHANNELS
76

APPLICATION:
Mechanical Application Electrical Application Industrial Application
Piping Racks Pipe & Conduit Supports Racks and Shelving
Tunnel Pipe Stanchions Raceway Systems Partitions
Concrete Inserts Raceway Systems Production Line Supports
Beam Attachments Lighting Fixture Supports Trolley Systems
Pipeline Height Adjustment Cable Tray Supports Wall Framing
Beam Adjustments
MATERIAL:
Mild Steel. Also other materials can also be provided on request.

FINISH AVAILABLE:
Plain, Electro-Galvanized, Hot dip Galvanized, Pre Galvanized & Zinc Flake.

Product Code TGSCH0P412115 TGSCH0P414115 TGSCH0P412120 TGSCH0P414120 TGSCH0P412125 TGSCH0P414125

Size Unit 41 X 21 X 1.5 41 X 41 X 1.5 41 X 21 X 2.0 41 X 41 X 2.0 41 X 21 X 2.5 41 X 41 X 2.5

Area of Shear cm ² 0.42 1.02 0.55 1.34 0.67 1.67

Moment of Inertia (xx) cm 0.7 3.87 0.88 4.59 1.03 5.87
Moment of Inertia (yy) cm 3.34 5.68 4.25 6.99 5.07 8.76
Min.Section Modulus cm 0.6 1.76 0.75 2.18 0.89 2.72
Wraping Constant cm 17.49 114.17 21.34 138.49 24.34 171.52
Torsional Constant cm 0.01 0.02 0.02 0.03 0.06 0.07
Allowable Bending Stress kN/cm² 21.82 21.82 21.82 21.82 21.82 21.82
Allowable Shrear Stress kN/cm² 12.6 12.6 12.6 12.6 12.6 12.6

SLOT SIZE : 12/30, 14/28.

Requested slot size can be manufactured.

APPLICATION EXAMPLES:
 STRUCTURAL L ANGLE

Note: Available in black, Electrogalvanized, Hot Dip Galvanized, SS304 & SS316 material.
C CHANNEL
Note: Available in black, Electrogalvanized, Hot Dip Galvanized, SS304 & SS316 material.
77 CHANNEL TGSCHP0000000

SCHN 21 SCHN 41 SCHN 62

SCHN 21D SCHN 41D SCHN 62D

MATERIAL: FINISH AVAILABLE:

Mild Steel. Also other materials can be provided on request Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

PRODUCT CODE ITEM LENGTH L (M) THICKNESS S (M)

TGSCHP2102002 SCHN 21/2.0 - 2M 2 2.0
TGSCHP2102003 SCHN 21/2.0 - 3M 3 2.0
TGSCHP2102503 SCHN 21/2.5 - 3M 3 2.5
TGSCHP2102506 SCHN 21/2.5 - 6M 6 2.5
TGSCHP4102002 SCHN 41/2.0 - 2M 2 2.0
TGSCHP4102003 SCHN 41/2.0 - 3M 3 2.0
TGSCHP4102006 SCHN 41/2.0 - 6M 6 2.0
TGSCHP4102502 SCHN 41/2.5 - 2M 2 2.5
TGSCHP4102503 SCHN 41/2.5 - 3M 3 2.5
TGSCHP4102506 SCHN 41/2.5 - 6M 6 2.5
TGSCHP6202506 SCHN 62/2.5 - 6M 6 2.5
TGSCHP21D2003 SCHN 21D/2.0 - 3M 3 2.0
TGSCHP41D2506 SCHN 41D/2.5 - 6M 6 2.5
TGSCHP62D2506 SCHN 62D/2.5 - 6M 6 2.5

APPLICATION EXAMPLES:
 Max recommended static load
Moment Moment Section Section
Weight Length = Length =
Area A of of modulus modulus
Item W Length = 1M 1.5 M Length = Length =
(mm2) inertia Iy inertia Iz Wy Wz
(kg/m) 3 3 5 M Frec Frec Frec 2 M Frec 3 M Frec
(mm) (mm) (mm ) (mm )
(KN) (KN) (KN) (KN) (KN)

SCHN 21/2.0 1.44 172 9700 46600 890 2270 1.14 0.49 0.22 0.12 0.05

SCHN 21/2.5 1.67 199 10300 52800 930 2580 1.19 0.52 0.23 0.13 0.06

SCHN 41/2 2.06 252 53300 76900 2580 3750 3.3 1.65 1.10 0.67 0.30

SCHN 41/2.5 2.45 300 60000 89900 2850 4380 3.65 1.82 1.22 0.76 0.34

SCHN 62/2.5 3.27 405 177000 129000 5620 6290 7.19 3.60 2.40 1.80 0.99

SCHN 21D/2 2.87 344 54900 93100 2610 4540 3.34 1.67 1.11 0.69 0.31

SCHN 41D/2.5 4.89 600 350100 179000 8760 8780 11.21 5.61 3.74 2.80 1.57

SCHN 62D/2.5 6.55 809 1110000 258000 17900 12580 22.91 11.46 7.64 5.73 3.82
78
79 CHANNEL WASHER TGCW000000000

MATERIAL: FINISH AVAILABLE:

Mild Steel. Also other materials can be provided on request Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

FOR CHANNEL
ITEM
M

TGCW000000008 M8
TGCW000000010 M10
TGCW000000012 M12

COUPLING NUT TGCPN00000000

e

s L

MATERIAL: FINISH AVAILABLE:

Mild Steel. Also other materials can be provided on request Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

LENGTH THREAD
ITEM S E
L (MM) D

TGCPN00000006 18 M6 10 11.1
TGCPN00000008 24 M8 13 15.0
TGCPN00000010 30 M10 17 19.6
TGCPN00000012 36 M12 19 21.9
TGCPN00000016 48 M16 24 27.7
 TGRN000000000 RAIL NUT
80

MATERIAL: FINISH AVAILABLE:

Mild Steel. Also other materials can be provided on request Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

Thread Thickness
Item For Channel
M S (mm)

TGRN000028006 M6 4 27/18-28/30

TGRN000028008 M8 5 27/18-28/30

TGRN000028010 M10 5 27/18-28/30

TGRN000041006 M6 - 38/40-40/62

TGRN000041008 M8 - 38/40-40/62

TGRN000041010 M10 - 38/40-40/62

81 CANTILEVER ARM TGCA000000000

SE-CA 41 SE-CA 62 SE-CA 41D

MATERIAL: FINISH AVAILABLE:

Mild Steel. Also other materials can be provided on request Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

WEIGHT WEIGHT
PRODUCT CODE PROFILE ITEM PROFILE
(KG/M) (KG/M)
TGCA0P4100300 41/2.5 300 TGCA0P4100450 41/2.5 450
TGCA0P4100600 41/2.5 600 TGCA0P4100750 41/2.5 750
TGCA0P4101000 62/2.5 1000 TGCA0H41D0750 41D/2.5 750
TGCA0P41D1000 41D/2.5 1000 TGCA0H4100300 41/2.5 300
TGCA0H4100450 41/2.5 450 TGCA0H4100600 41/2.5 600
TGCA0H4100750 41/2.5 750 TGCA0S4100300 - 300
TGCA064100450 - 450 TGCA0S4100600 - 600

MAX RECOMMENDED STATIC LOAD

PRODUCT CODE
LOAD CASE 1 FREC (kN) LOAD CASE 2 FREC (kN) LOAD CASE 3 FREC (kN)
TGCA0P4100300 2.67 1.3 2.67
TGCA0P4100450 1.8 0.9 1.8
TGCA0P4100600 1.33 0.67 1.33
TGCA0P4100750 1.05 0.45 1.05
TGCA0P6201000 1.7 0.74 1.7
TGCA0P41D0750 3.5 1.7 3.5
TGCA0P41D1000 2.6 1.3 2.6

APPLICATION EXAMPLES:
 TGDCA00000000 DOUBLE CHANNEL CANTILEVER ARMS
82

APPLICATION:
Provides strength and stability to various support system application.

MATERIAL:
Mild Steel. Also other materials can also be provided on request

FINISH AVAILABLE:
Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

PRODUCT CODE PRODUCT DESCRIPTION LENGTH

TGDCA000E0150 41 X 41 150
TGDCA000E0300 41 X 41 300
TGDCA000E0450 41 X 41 450
TGDCA000E0600 41 X 41 600
TGDCA000E0750 41 X 41 750
TGDCA000E0900 41 X 41 900

NOTE : Any non standard size also can manufacture.

APPLICATION EXAMPLES:
83 WALL BRACKET FOR CHANNEL TGWBC00000000

Saddle Support : 41/21 , 41/41

FIELD OF APPLICATION :

Simple assembly of strong cross-beams using Support channels

Applicable for cramped installtion

Conditions in shafts and ducts

ADVANTAGES:

The vertical and horizontal holes in the base plate enable simple alignment of the Saddle support

Good load transfer due to the high bending stiffness of the saddle connection

Ideal connecting element for channel section structures

The section 38/80 provides torque-resistant support as channel is encompassed on both sides

PROTECTION CAPS TGPC000000000

FOR SUPPORT CHANNEL

41mm X 41mm
41mm X 21mm
 TGGC000000000 HINGE CONNECTOR
84

ADVANTAGES:

The specialist product in solving problems when connecting Support Channels to inclined surfaces

Flexible angle adjustment during installation possible

Easy and quick fastening owing to pre-mounted Double Rail Nut

Fixing to the Support Channel in any direction possible when using profile 38/40

Ideal for installation at slope main truss, vaults and semicircular cable shafts

Installation of a pipe bracket Pipe installation to Wall Installation of a support frame in

at slope main truss Bracket with diagonal strut vaults or semicircular shafts

DATA :
Pre-mounted consists of:
-1 Saddle Support
-1 Double Rail Nut
-2 Hexagon Head bolts M10
-2 Washers
85 MOUNTING ANGLES TGMA000000000

APPLICATION:
Solid fixing element for construction of pre-wall installations and shelves as well as for channel constructions for attachments of
pipelines and air ducts without welding
Also applicable for direct mounting on walls, ceilings or floors
Suitable for outdoor use

ADVANTAGES:
Versatile in use due to oblong holes
e.g. as:
Angular support bracket Angular load-bearing bracket
Connection element
Angular bracket
Multi-purpose component for professional, practical installation solutions
 TGDCA000E0000 LIGHT WELDED STEEL BRACKET
86

MATERIAL :
Mild Steel.
FINISH AVAILABLE :
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

SERVICE :
Designed for suspend hanger rod for support of
lights loads under 3.33 kN from a wall or structure.

PRODUCT A B C W DESIGN LOAD

CODE MM MM MM MM (KN)

TGLWB000E0229 229 155 203 50 3,33

TGLWB000E0330 330 257 305 50 3,33
TGLWB000E0483 483 409 457 50 3,33
87 FLAT PLATE FITTINGS TGCHA00000000

88

132

4
10
132

60

44
0 220
22

Unless otherwise specified assume that all holes dia 14 mm, thickness 6mm and for 41 - 45 - 60 series.

MATERIAL :
Mild Steel.

FINISH AVAILABLE :
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

44
88
45
88
44

45

44
88
132

44

2
13

88 88
44
44
44

44
120
88
60

70

44 35

44

88
44
88

88

88
88 88
44
88 132
44
 TGCHA00000000 ANGLE FITTINGS
88

SE-AF 2 SE-AF 3 SE-AF 4 SE-AF 2/1350

MATERIAL:
Mild Steel. Also other materials can be provided on request

FINISH AVAILABLE:
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

44 88
22
88
44
44
132

88
88
88 70
100

44 128
132

88 88
44
44 88
50
44

30
87

87

Unless otherwise specified assume that all holes dia 14 mm, thickness 6mm and for 41 - 45 - 60 series.
89 Z SHAPED FITTINGS TGCHA00000000

59
44
22

44

44
93 93

44

90

44

100

40
40
65
50

40

94

Unless otherwise specified assume that all holes dia 14 mm, thickness 6mm and for 41 series.

MATERIAL :
Mild Steel.
FINISH AVAILABLE :
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.
THREADED ROD & FASTENERS
90 THREADED RODS TGTR000000000

FULL THREADED BARS

STANDARDS:
ASTM/ASMS/BS/DIN/BS EN ISO/JIS

MATERIAL:
Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel

FINISH AVAILABLE :
Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, Yellow, Cadmium & Nickel.

SIZE RANGE:
M6 to M100 in Metric Series
1/4” to 4” in Imperial

THREADS:
UNC, 8UN, UNF, Metric Coarse and Metric Fine

TYPICAL GRADES & STANDARDS:

ASTM A193 Grade B7, B7M, B8, B8M & B16
ASTM A320 Grade L7 & L7M
Stainless Steel 304,304L, 326, 316L, A2-70/80, A4-70/80
BS 3692/BS 4190 Grade 4.6, 4.8, 5.6, 5.8, 8.8
Any other specific grade can be manufactured upon request with short lead times.

ORDERING INFORMATION:
Dimensions - Dia and Length
Standard and Grade

APPLICATION EXAMPLES:
Steel ThreadedRod Steel Threaded
ANSI B.1.1/BS4882 Rod to DIN 975
Material To ASMT Material To ASMT
A193-B7/B7M/B16/B8 & B8M A193M-B7/B7M/B16/B8 & B8M

THREAD THREAD
PRODUCT PRODUCT
DIA(D) PER DIA(D) PITCH
CODE CODE
INCH (mm)

TGTR00UE01400 1/4"UNC 20 TGTR00ME00600 M6 1

TGTR00UE51600 5/16"UNC 18 TGTR00ME00800 M8 1.25
TGTR00UE03800 3/8"UNC 16 TGTR00ME01000 M10 1.5
TGTR00UE71600 7/16"UNC 14 TGTR00ME01200 M12 1.75
TGTR00UE01200 1/2"UNC 13 TGTR00ME01400 M14 2
TGTR00UE91600 9/16"UNC 12 TGTR00ME01600 M16 2
TGTR00UE05800 5/8"UNC 11 TGTR00ME01800 M18 2.5
TGTR00UE03400 3/4"UNC 10 TGTR00ME02000 M20 2.5
TGTR00UE07800 7/8"UNC 9 TGTR00ME02200 M22 2.5
TGTR00UE00100 1"UNC 8 TGTR00ME02400 M24 3
TGTR00UE11800 1.1/8"UNC 7 TGTR00ME02700 M27 3
TGTR00UE11800 1.1/8"UNC 8 TGTR00ME03000 M30 3.5
TGTR00UE11400 1.1/4"UNC 7 TGTR00ME03300 M33 3.5
TGTR00UE11400 1.1/4"UNC 8 TGTR00ME03600 M36 4
TGTR00UE13800 1.3/8"UNC 6 TGTR00ME03900 M39 4
TGTR00UE13800 1.3/8"UNC 8 TGTR00ME04200 M42 4.5
TGTR00UE12200 1.2/2"UNC 6 TGTR00ME04500 M45 4.5
TGTR00UE12200 1.2/2"UNC 8 TGTR00ME04800 M48 5
TGTR00UE15800 1.5/8"UNC 8 TGTR00ME05200 M52 5
TGTR00UE13400 1.3/4"UNC 8 TGTR00ME05600 M56 5.5
TGTR00UE17800 1.7/8"UNC 8 TGTR00ME06400 M64 6
TGTR00UE00200 2"UNC 8 TGTR00ME07200 M72 6
TGTR00UE21400 2.1/4"UNC 8
TGTR00UE21200 2.1/2"UNC 8
TGTR00UE23400 2.3/4"UNC 8
TGTR00UE00300 3"UNC 8
92 STUD BOLTS TGSB000000000

Full Threaded Studs and Engineering Studs

STANDARDS:-
ASTM/ASME/BS/DIN/BS EN ISO /JIS

MATERIAL:-
Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel.

FINISH AVAILABLE :
Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, Yellow, Cadmium & Nickel.

SIZE RANGE:-
M6 to M100 in metric series
¼” to 4” in imperial

THREADS:-
UNC, 8UN, UNF, Metric Coarse and Metric Fine

TYPICAL GRADES & STANDARDS:-

ASTM A193 Grade B, B7M, B8, B8M & B16
ASTM A320 Grade L7 & L7M
Any other specific grade can be manufactured upon request with short lead times.

ORDERING INFORMATION:-
Dimensions - Dia and length.
Standard and Grade.
Nut and washer quantity
 TGAB000000000 ANCHOR BOLTS
93

Anchor bolts, Foundation bolts, holding down Bolts, U Bolts, Sag Rods & Tie Rods can be manufactured as per customer’s drawing
and as per grade required.

STANDARDS:-
ASTM/ASME/BS/DIN/BS EN ISO /JIS

MATERIAL:-
Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel.

FINISH AVAILABLE :
Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, Yellow, Cadmium & Nickel.

SIZE RANGE:-
M6 to M100 in metric series
¼” to 4” in imperial

THREADS:-
UNC, 8UN, UNF, Metric Coarse and Metric Fine
Typical Grades & Standards:-
BS 3692 / BS 4190 grade 4.6, 4.8, 5.6, 5.8, 8.8, 10.9 and 12.9
ASTM A307, A325, A193, B7 & B16, ASTM A320 L7
Stainless Steel 304, 304L, 316, 316L, A2-70/80, A4-70/80, ASTM A193 Grade B8 & B8M
ASTM A675 Grade 90, ASTM A572 Grade 50 and ASTM F1554 grade 36, 55 and 105
Any other specific grade can be manufactured upon request with short lead times.

ORDERING INFORMATION:-
Dimensions.
Standard and Grade.
Nut and washer quantity
Plate and sleeve dimensions (if required).
SPECIALLY MANUFACTURED ITEMS:-

N.B. (1/2”) M15-(24”)

‘U’ Bolts Grip
M600 DIA.
and Non Grip
Bar Size Range (1/4”)
Type
M6 - (4”) M100

Square Bend Bar Size Range

‘U’ Bolts (1/4”) M6 - (4”) M100

‘J’ Foundation Bar Size Range

Bolts (1/4”) M6 - (4”) M100

Double Ended Bar Size Range

Engineer Studs (1/4”) M6 - (4”) M100

Waisted Double
Bar Size Range
Ended Engineer
(1/4”) M6 - (4”) M100
Studs

Tie Bars & Bar Size Range

Foundation Bolts (1/4”) M6 - (4”) M100

All products are available with the appropriate grades of nuts and washers
All forms of plating and coating can be carried out
 TGHB000000000 HEX BOLTS
95

Hex Head and Heavy Hex Head in Full and Partial Threading

STANDARDS:-
ASTM/ASME/BS/DIN/BS EN ISO /JIS

MATERIAL:-
Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel.

FINISH AVAILABLE :
Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, Yellow, Cadmium & Nickel.

SIZE RANGE:-
M6 to M64 in metric series
¼” to 2½” in imperial
Bigger sizes can be manufactured as per order.

THREADS:-
UNC, 8UN, UNF, Metric Coarse and Metric Fine

TYPICAL GRADES & STANDARDS:-

BS3692 / BS4190 grade 4.6, 4.8, 5.6, 5.8, 8.8, 10.9 and 12.9
ASTM A307 Grade A and B
ASTM A325
ASTM A193 Grade B7, B7M, B8, B8M & B16
ASTM A320 Grade L7 & L7M
Stainless Steel 304, 304L, 316, 316L, A2-70/80, A4-70/80
Any other specific grade can be manufactured upon request with short lead times.

ORDERING INFORMATION:-
Dimensions – Size Dia and Length.
Standards and Grade

APPLICATION EXAMPLES:
 DIN 93 HEXAGON HEAD BOLT
Material ASTM A193 Grade B7

Threads (d) M6 M8 M10 M12 M16 M20 M24 M27 M30 M33 M36 M39 M42 M45 M52

Min 9.78 12.73 16.73 18.67 23.67 29.67 35.38 40.00 45.00 49.00 53.80 58.80 63.10 68.10 78.10
Across flat (s)
Max 10.00 13.00 17.00 19.00 24.00 30.00 36.00 41.00 46.00 50.00 55.00 60.00 65.00 70.00 80.00

Across
corner(e) Min 11.05 14.38 18.90 21.10 26.75 33.53 39.98 45.20 50.85 55.37 60.79 66.44 71.30 76.95 88.25

Min 3.85 5.15 6.22 7.32 9.82 12.28 14.78 16.65 18.28 20.58 22.08 24.58 25.58 27.58 32.50
Head
Thickness(k)
Max 4.15 5.45 6.58 7.68 10.18 12.72 15.22 17.35 19.12 21.42 22.92 25.42 26.42 28.42 33.50

Min 1.00 1.25 1.5 1.75 2.00 2.50 3.00 3.00 3.50 3.50 4.00 4.00 4.50 4.50 5.00
Unthreaded
Length (a)
Max 3.00 4.00 4.50 5.30 6.00 7.50 9.00 9.00 10.50 10.50 12.00 12.00 13.50 13.50 5.00

Min 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.30 0.30 0.30 0.30
Washer face
Depth (c)
Max 0.50 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.00 1.00 1.00 1.00

Washer face
Dia (dw) Min 8.88 11.63 15.60 17.40 22.49 28.19 33.61 38.00 42.70 46.50 51.10 55.90 55.90 64.70 74.20

Head junction
Min 0.25 0.40 0.40 0.60 0.60 0.80 0.80 1.00 1.00 1.00 1.00 1.00 1.20 1.20 1.60
Radius(r)
 DIN 933 HEXAGON HEAD BOLT
Material ASTM A320 Grade L7

A320 L7 HEX BOLTS

Threads (d) M6 M8 M10 M12 M16 M20 M24 M27 M30 M33 M36 M39 M42 M45 M52

Min 9.78 12.73 16.73 18.67 23.67 29.67 35.38 40.00 45.00 49.00 53.80 58.80 63.10 68.10 78.10
Across flat (s)
Max 10.00 13.00 17.00 19.00 24.00 30.00 36.00 41.00 46.00 50.00 55.00 60.00 65.00 70.00 80.00

Across corner(e) Min 11.05 14.38 18.90 21.10 26.75 33.53 39.98 45.20 50.85 55.37 60.79 66.44 71.30 76.95 88.25

Min 3.85 5.15 6.22 7.32 9.82 12.28 14.78 16.65 18.28 20.58 22.08 24.58 25.58 27.58 32.50
Head
Thickness(k)
Max 4.15 5.45 6.58 7.68 10.18 12.72 15.22 17.35 19.12 21.42 22.92 25.42 26.42 28.42 33.50

Min 1.00 1.25 1.5 1.75 2.00 2.50 3.00 3.00 3.50 3.50 4.00 4.00 4.50 4.50 5.00
Unthreaded
Length (a)
Max 3.00 4.00 4.50 5.30 6.00 7.50 9.00 9.00 10.50 10.50 12.00 12.00 13.50 13.50 5.00

Min 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.30 0.30 0.30 0.30
Washer face
Depth (c)
Max 0.50 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.00 1.00 1.00 1.00

Washer face
Dia (dw) Min 8.88 11.63 15.60 17.40 22.49 28.19 33.61 38.00 42.70 46.50 51.10 55.90 55.90 64.70 74.20

Head junction
Min 0.25 0.40 0.40 0.60 0.60 0.80 0.80 1.00 1.00 1.00 1.00 1.00 1.20 1.20 1.60
Radius(r)
ASTM A325M HEX BOLTS

A325M HEX BOLTS

Threads (d) M16 M20 M24 M27 M30 M33 M36

Min 26.16 33.00 35.00 40.00 45.00 49.00 58.80

Across flat (s)
Max 27.00 34.00 36.00 41.00 46.00 50.00 60.00

Min 29.56 37.29 39.55 45.20 50.85 55.37 66.44

Across corner(e)
Max 31.18 39.26 41.57 47.34 53.12 57.74 69.28

Min 9.25 11.60 13.10 14.10 16.10 17.65 21.45

Head Thickness(k)
Max 10.75 13.40 14.90 15.90 17.90 19.75 23.55

Washer face Min 0.40 0.40 0.40 0.40 0.40 0.40 0.40
Depth (c)
Max 0.80 0.80 0.80 0.80 0.80 0.80 0.80

Washer face
Dia (dw) Min 24.90 31.40 33.30 38.00 42.80 46.50 55.90

Min 15.30 19.16 21.16 23.16 26.16 29.16 35.00

Shank Diameter
(d s)
Max 16.70 20.84 22.84 24.84 27.84 30.84 37.00

Head junction
Min 0.60 0.80 0.80 1.00 1.20 1.20 1.50
Radius(r)

1<100 31 36 38 41 44 49 56
Thread
Length (b)
1>100 38 43 45 48 51 56 63

l = Overall length of the Bolt

 DIN 933 HEX SCREWS (FULL THREAD)
Grades 4.6, 8.8, 10.9, 12.9, A2 70, A2 80, A4 70 and A4 80

Threads (d) M6 M8 M10 M12 M16 M20 M24 M27 M30 M33 M36 M39 M42 M45 M52

Min 9.78 12.73 16.73 18.67 23.67 29.67 35.38 40.00 45.00 49.00 53.80 58.80 63.10 68.10 78.10
Across flat (s)
Max 10.00 13.00 17.00 19.00 24.00 30.00 36.00 41.00 46.00 50.00 55.00 60.00 65.00 70.00 80.00

Across corner(e) Min 11.05 14.38 18.90 21.10 26.75 33.53 39.98 45.20 50.85 55.37 60.79 66.44 71.30 76.95 88.25

Min 3.85 5.15 6.22 7.32 9.82 12.28 14.78 16.65 18.28 20.58 22.08 24.58 25.58 27.58 32.50
Head
Thickness(k)
Max 4.15 5.45 6.58 7.68 10.18 12.72 15.22 17.35 19.12 21.42 22.92 25.42 26.42 28.42 33.50

Min 1.00 1.25 1.5 1.75 2.00 2.50 3.00 3.00 3.50 3.50 4.00 4.00 4.50 4.50 5.00
Unthreaded
Length (a)
Max 3.00 4.00 4.50 5.30 6.00 7.50 9.00 9.00 10.50 10.50 12.00 12.00 13.50 13.50 5.00

Min 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.30 0.30 0.30 0.30
Washer face
Depth (c)
Max 0.50 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.00 1.00 1.00 1.00

Washer face
Dia (dw) Min 8.88 11.63 15.60 17.40 22.49 28.19 33.61 38.00 42.70 46.50 51.10 55.90 55.90 64.70 74.20

Head junction
Min 0.25 0.40 0.40 0.60 0.60 0.80 0.80 1.00 1.00 1.00 1.00 1.00 1.20 1.20 1.60
Radius(r)
DIN 931 HEX BOLTS (HALF THREAD)
Grades - 4.6, 8.8, A2 70, A2 80, A4 70 and A4 80

A320 L7 HEX BOLTS

Threads (d) M6 M8 M10 M12 M16 M20 M24 M27 M30 M33 M36 M39 M42 M45 M52

Min 9.78 12.73 16.73 18.7 23.67 29.67 35.38 40.00 45.00 49.00 53.80 58.80 63.10 68.10 78.10
Across flat (s)
Max 10.00 13.00 17.00 19.00 24.00 30.00 36.00 41.00 46.00 50.00 55.00 60.00 65.00 70.00 80.00

Across
corner(e) Min 11.05 14.38 18.90 21.10 26.75 33.53 39.98 45.20 50.85 55.37 60.79 66.44 71.30 76.95 88.25

Min 3.85 5.15 6.22 7.32 9.82 12.28 14.78 16.65 18.28 20.58 22.08 24.58 25.58 27.58 32.50
Head
Thickness(k)
Max 4.15 5.45 6.58 7.68 10.18 12.72 15.22 17.35 19.12 21.42 22.92 25.42 26.42 28.42 33.50

Min 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.30 0.30 0.30 0.30
Washer face
Depth (c)
Max 0.50 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.00 1.00 1.00 1.00

Min 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.30 0.30 0.30 0.30
Washer face
Dia (dw)
Max 0.50 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.00 1.00 1.00 1.00

Min 5.82 7.78 9.78 11.73 15.73 19.67 23.67 27.00 30.00 33.00 36.00 39.00 42.00 45.00 52.00
Shank
Diameter (ds)
Max 6.00 8.00 10.00 12.00 16.00 20.00 24.00 26.48 29.48 32.38 35.38 38.38 41.38 44.38 51.26

Head junction
Radius(r) Min 0.25 0.40 0.40 0.60 0.60 0.80 0.80 1.00 1.00 1.00 1.00 1.00 1.20 1.20 1.60

1<125* 18 22 26 30 38 46 54 60 66
Thread
125<200 24 28 32 36 44 52 60 66 72 78 84 90 96 102 116
Length (b)

1>200* 37 41 45 49 57 65 73 79 85 91 97 103 109 115 129

l = Overall length of the Bolt

DIN 603 STAINLESS STEEL CARRIAGE BOLT/MUSHROOM BOLT

Threads ( d ) M6 M8 M10 M12

Min 15.45 19.35 23.35 29.35

dk
Max 16.55 20.65 24.65 30.65

Min 5.52 7.42 9.42 11.30

ds
Max 6.00 8.00 10.00 12.00

Min 3.40 4.40 5.40 7.25

f
Max 4.60 5.60 6.60 8.75

Min 3.12 4.12 4.62 6.05

k
Max 3.88 4.88 5.38 6.95

r1 Approx 12.60 16.00 19.20 24.10

r2 Max 0.50 0.50 0.50 1.00

r3 Max 0.90 1.20 1.50 1.80

Min 5.52 7.42 9.42 11.30

v
Max 6.48 8.58 10.58 12.70

1<125* 18 22 26 30

(b) 125<200 24 28 32 36

1>200* 37 41 45 49

l = Overall length of the Bolt

102 SOCKET SCREWS TGSS000000000

Socket Screws are also known as Allen Head Bolts and are fastened with a hex Allen
wrench. Socket Screws are available in various head styles and materials.

STANDARDS:-
DIN/BS EN ISO

MATERIAL:-
Alloy Steel & Stainless Steel (304, 304L, 316, 316L)

FINISH AVAILABLE :
Plain & Electro-Galvanized.

SIZE RANGE:-
M5 to M24 in metric series
Bigger sizes can be manufactured as per order.

THREADS:-
Metric Coarse and Metric Fine

TYPICAL GRADES & STANDARDS:-

A2-70/80, A4-70/80
DIN 912
DIN 7991
ISO 7380
Any other specific grade can be manufactured upon request with short lead times.

ORDERING INFORMATION:-
Dimensions - Size Dia and Length.
Standard and Material Grade
Nut and Washer quantity
DIN 912 STAINLESS STEEL HEXAGON
SOCKET HEAD CAPSCREW

Threads ( d ) M6 M8 M10 M12

Min 9.78 12.73 15.73 17.73

Max For
10.00 13.00 16.00 18.00
Plain Heads
dk

Max For
10.22 13.27 16.27 18.27
Knurled Heads

Min 5.82 7.78 9.78 11.73

ds
Max 6.00 8.00 10.00 12.00

s Min 5.02 6.02 8.03 10.03

Max 5.14 6.14 8.175 10.175

e Min 5.723 6.863 9.149 11.429

k Min 5.70 7.64 9.64 11.57

Max 6.00 8.00 10.00 12.00

t Min 3.00 4.00 5.00 6.00

(b) Ref 24 28 32 36

l = Overall length of the Bolt

DIN 7991 STAINLESS STEEL HEXAGON
SOCKET COUNTERSUNK SCREW

Threads (d) M6 M8 M10 M12

dk 12.00 16.00 20.00 24.00

s 4.00 5.00 6.00 8.00

k 3.30 4.40 5.50 6.50

t 2.50 3.50 4.40 4.60

l = Overall length of the Bolt

 TGHN000000000 HEX NUTS
105

Standard Hex Nut, Heavy Hex Nut, Hex Coupling Nut, Nylon Lock Nut, Spring Nut, Dome Nut and Wing Nut

STANDARDS:-
ASTM/ASME/BS/DIN/BS EN ISO /JIS

MATERIAL:-
Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel.

FINISH AVAILABLE :
Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, Yellow, Cadmium & Nickel.

SIZE RANGE:-
M6 to M64 in metric series
¼" to 2-½" in imperial
Bigger sizes can be manufactured as per order.

THREADS:-
UNC, 8UN, UNF, Metric Coarse and Metric Fine

TYPICAL GRADES & STANDARDS:-

DIN 934 Class 4, 8, 10, 12, A270, A280, A470 and A480
ASTM A194/A194M Grades 2H, 2HM, 4L, 7L and 7LM
ASTM A563/563M Grades 8, 10S, A, B, C, D, DH, DH3

ORDERING INFORMATION:-
Dimensions - Size.
Standard and Grade

APPLICATION EXAMPLES:
HEAVY HEX NUTS TO DIN 934 (H=D)
Material ASTM A194 Grade 2H/2HM/4L, 7L, 7LM

A194 HEAVY HEX BOLTS

THREAD ACROSS THICKNESS WEIGHT

DIA.(D)
PITCH FLATS AF (M) KG/100

M8 1.25 13 8 0.65
M10 1.5 17 10 1.45
M12 1.75 19 12 2.17
M14 2 22 14 3.13
M16 2 24 16 4.16
M18 2.5 27 18 6.20
M20 2.5 30 20 8.05
M22 2.5 32 22 9.85
M24 3 36 24 13.80
M27 3 41 27 20.65
M30 3.5 46 30 27.90
M33 3.5 50 33 36.00
M36 4.0 55 36 49.15
M39 4.0 60 39 42.75
M42 4.5 65 42 81.50
M45 4.5 70 45 100.00
M48 5.0 75 48 122.00
M52 5.0 80 52 152.50
M56 5.5 85 56 177.50
M64 6.0 95 64 247.50
M72 6.0 105 72 334.50
M76 6.0 110 76 380.00
 A563M - 10S HEAVY HEX NUTS

A563-10S HEAVY HEX BOLTS

Threads ( d ) M12 M16 M20 M22 M24 M27 M30 M36

Min 20.16 26.16 33.00 35.00 40.00 45.00 49.00 58.80

Across flat ( s )
Max 21.00 27.00 34.00 36.00 41.00 46.00 50.00 60.00

Across corner ( e ) Min 22.78 29.56 37.29 39.55 45.20 50.85 55.37 66.44

Min 11.90 16.40 19.40 22.30 22.90 26.30 29.10 35.00

Nut Thickness (m)
Max 12.30 17.10 20.70 23.60 24.20 27.60 30.70 36.60

Bearing face Dia(dw) Min 19.20 24.90 31.40 33.30 38.00 42.80 46.60 55.90

HEAVY HEX NUTS TO ANSI B18.2.2

Material ASTM A194 Grade 2H/2HM/4L, 7L, 7LM
 A194 HEAVY HEX BOLTS

Thread Across Weight

Dia.(D) Thickness(m)
Pitch Flats AF KG/100

1/4" UNC 20 7/16" 1/4" 0.3

5/16" UNC 18 1/2" 5/16" 0.4

3/8" UNC 16 11/16" 3/8" 1.4
7/16" UNC 14 3/4" 3/16" 1.9

1/2" UNC 13 7/8" 1/2" 3.0

9/16" UNC 12 15/16" 9/6" 3.7

5/8" UNC 11 1.1/16" 5/8" 5.4

3/4" UNC 10 1.14" 3/4" 8.8
7/8" UNC 9 1.7/16" 7/8" 13.5

1" UNC 8 1.5/8" 1" 19.3

1.1/8" UNC 8 1.13/16" 1.1/8" 26.9
1.1/4" UNC 8 2" 1.1/4" 35.7
1.3/8" UNC 8 2.3/16" 1.3/8" 46.3
1.1/2" UNC 8 2.3/8" 1.1/2" 59.5
1.5/8" UNC 8 2.9/16" 1.5/8" 73.6
1.3/4" UNC 8 2.3/4" 1.3/4" 92.7
1.7/8" UNC 8 2.15/16" 1.7/8" 109.5

2" UNC 8 3.1/8" 2" 135.8

2.1/4" UNC 8 3.1/2" 2.1/4" 190.3
2.1/2" UNC 8 3.7/8" 2.1/4" 256
2.3/4" UNC 8 4.1/4" 2.3/4" 335
3" UNC 8 4.5/8" 3" 432
3.1/4" UNC 8 5" 3.1/4" 543
3.1/2" UNC 8 5.3/8" 3 1/2" 694
 DIN 934 HEX NUTS

DIN 934 HEX NUTS

Across Across Nut

Threads (d)
Flat (s) Corner (e) Thickness (m)

M6 10.00 11.05 6.00

M8 13.00 14.38 6.50

M10 17.00 18.90 8.00

M12 19.00 21.10 10.00

M16 24.00 26.75 13.00

M20 30.00 32.95 16.00

M24 36.00 39.55 19.00

M27 41.00 45.20 22.00

M30 46.00 50.85 24.00

M33 50.00 55.37 26.00

M36 55.00 60.79 29.00

M39 60.00 66.44 31.00

M42 65.00 71.30 34.00

M45 70.00 76.95 36.00

M48 75.00 82.60 38.00

M52 80.00 88.25 42.00

M56 85.00 93.56 45.00

M64 95.00 104.86 51.00

M72 105.00 116.16 58.00

110 FLAT WASHERS TGFW000000000

Plain Washers, Spring Lock Washers and Hardened Steel Washers

STANDARDS:-
ASTM/ASME/BS/DIN/BS EN ISO /JIS

MATERIAL:-
Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel.

FINISH AVAILABLE :
Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, Yellow, Cadmium & Nickel.

SIZE RANGE:-
M6 to M64 in metric series
¼” to 2-½” in imperial
Bigger sizes can be manufactured as per order.

TYPICAL GRADES & STANDARDS:-

DIN 125/A
DIN 127/B
DIN 9021
ASTM F436 and F436M
Any other specific grade can be manufactured upon request with short lead times

ORDERING INFORMATION:-
Dimensions – Size.
Standard and Grade

APPLICATION EXAMPLES:
 DIN 125 FLAT WASHER

Washer Inner Outer Diameter

Thickness (h)
size Diameter (d1) (d2)

M6 6.40 12.00 1.60

M8 8.40 16.00 1.60
M10 10.50 20.00 2.00
M12 13.00 24.00 2.50
M16 17.00 30.00 3.00
M20 21.00 37.00 3.00
M24 25.00 44.00 4.00
M27 28.00 50.00 4.00
M30 31.00 56.00 4.00
M33 34.00 60.00 5.00
M36 37.00 66.00 5.00
M39 40.00 72.00 6.00
M42 43.00 78.00 7.00
M45 46.00 85.00 7.00
M48 50.00 92.00 8.00
M52 54.00 98.00 8.00
M56 58.00 105.00 9.00
M64 66.00 115.00 9.00
M72 74.00 125.00 10.00
 F436M WASHER

Washer Inner Diameter (d1) Outer Diameter (d2) Thickness(h)

Size
Max. Min. Max. Min. Max. Min.

12 14.40 14.00 27.00 25.70 4.60 3.10

14 16.40 16.00 30.00 28.70 4.60 3.10
16 18.40 18.00 34.00 32.40 4.60 3.10
20 22.50 22.00 42.00 40.40 4.60 3.10
22 24.50 24.00 44.00 42.40 4.60 3.40
24 26.50 26.00 50.00 48.40 4.60 3.40
27 30.50 30.00 56.00 54.10 4.60 3.40
30 33.60 33.00 60.00 58.10 4.60 3.40
36 39.60 39.00 72.00 70.10 4.60 3.40
42 45.60 45.00 84.00 81.10 7.20 4.60
48 52.70 52.00 95.00 92.80 7.20 4.60
56 62.70 62.00 101.00 104.50 8.70 6.10
64 70.70 70.00 187.00 115.80 8.70 6.10
72 78.70 76.00 130.00 127.50 8.70 6.10
 MATERIAL FINISHES
113

Hot Dip Galvanizing:- STD COMPONENTS

ASTM A153 Rolled/ Pressed/ steel/ Hardware
ASTM A641 Carbon Steel Wire(Nails/ Straples etc)
ASTM B695 Iron & Steel
ASTM A123 Iron & Steel Anchor Bolts, Fabricated Products
BS EN ISO 461 Heavy Zinc Deposit 388.1 to 76.2 microns

ELECTRO-DEPOSITED Zinc ASTM B633 Iron & Steel Products

Plating:-
BS 3382 PART 2 Bright Finish

ELECTRO-DEPOSITED BS 3382 PART 1 Semi- Bright Finish

Cadmium Plating:-

ELECTRO-DEPOSITED AMS 2416 Steel

Nickel Cadmium Plating:-

ELECTRO-DEPOSITED BS 3382 PART 3 & 4 Steel & Copper Alloy

Nickel & Nickel
Plus Chromium:-

PTFE Colour- Red, Medium Dark Blue,

(FLUOROPOLYMER Coating):- XYLAN 1070
Green, Orange, Yellow, Black
XYLAN 1052 Blue
XYLAN 1424 Water Base Blue
xylan standard Aluminium "cermet" Coating
XYLAN Cobalt Blue
Blue 1514
114 TECHNICAL INFORMATION

Mechanical properties per ISO 898-1

(Externally Threaded Fasteners)

Core
Metric Min. Proof Hardness Grade
Size Min. Tensile Min. Yield
Property Material Strength Rockwell Identification
Range Strength MPA Strength MPA
Class MPA Marking’
Min. Max.

Low or
Medium
4.6 M5-M39 225 400 (58,000 PSI) B67 B99.5 240
Carbon
Steel

Medium
M5-M16 580 800 (116,000 PSI) C22 C32 640
Carbon
8.8 Steel:
quenched
M18-M39 600 830(120,000 PSI) C23 C34 660
& tempered

Alloy Steel
10.9 quenched M5-M39 830 1040 (150,800 PSI) C32 C39 940
& tempered

Alloy Steel
12.9 quenched M16-M39 970 1220 (177,000 PSI) C39 C44 1100
& tempered
MECHANICAL PROPERTIES PER DIN 267 PART 4
(INTERNALLY THREADED FASTENERS)

CORE HARDNESS GRADE IDENTIFICATIONS

PROPERTY CLASS TYPICAL MATERIAL PROOF STRESS MPA
ROCKWELL (MAX.) MARKING

Low to Medium
Class 8 800 C30
Carbon Steel

Medium Carbon
Class 10 Steel; quenched 1000 C36
& tempered

Medium Carbon
Class 12 Steel; quenched 1200 C36
& tempered
116 DROP IN ANCHOR TGDPA00000000

DRILL BIT ANCHOR LENGTH THREAD LENGTH

PRODUCT CODE SIZE
(B) (C) (D)
TGDPA000E0830 M8 10 30 13
TGDPA000E1040 M10 12 40 16
TGDPA000E1250 M12 16 50 21
TGDPA000E1665 M16 20 65 30
TGDPA000E2080 M20 25 80 30

DRAW IN ANCHOR TGDWA00000000

SHIELD HOLE LENGTH OF

PRODUCT CODE SIZE
LENGTH DIAMETER ANCHOR

TGDWA000E0645 M6 45 12 45
TGDWA000E0850 M8 50 14 50
TGDWA000E1060 M10 60 16 60
TGDWA000E1265 M12 75 20 65
TGDWA000E1695 M16 115 25 95
 TGWA000000000 WEDGE ANCHOR
117

Measure M6 M8 M10 M12 M16 M20 M24

Thread Diameter mm 6 8 10 12 16 20 24

Drill Hole Diameter mm 6 8 10 12 16 20 24

Clearence Hole Diameter mm 7 9 12 14 18 22 26

Embedment Depth mm 35 40 50 60 70 100 120

Minimum Structure Thickness mm 50 60 80 100 110 130 180

Ultimate Tensile Strength N/mm2 500 500 500 500 400 400 400

Yield Strength N/mm2 400 400 400 400 240 240 240

Recommended Tightening Torque Nm 6 10 28 34 85 160 300

Characteristic Tensile Load kN 5.4 8.4 12.9 20.4 24 32.4 57.6

Recommended Tensile Load kN 1.8 2.8 4.3 6.8 8 10.8 26.2

Characteristic Shear Load kN 5.8 8 14.5 18 26 35 74

Recommended Shear Load kN 2.3 3.2 5.8 7.2 10.4 14 49.3

Minimum Centre Spacing mm 70 80 100 120 140 200 240

Mininmum Edge Distance mm 50 60 80 100 130 160 200

118 FOUNDATION BOLT TGFB000000000

J TYPE EYE TYPE

L TYPE PLATE TYPE

APPLICATION: FINISH:
Cement Plant Plain, Electro-Galvanized, Hot Dip Galvanized, Epoxy Coated
& Zinc Flake.
Petrochemical Plant
Marine Industry
Construction Industry
Sugar Plant
Railway Industries
Nuclear power Plants ant More

MATERIAL OF CONSTRUCTION BOLT AND NUT STANDARDS

MILD STEEL ASTM A 307, Gr. A OR A 36 ASTM A 563

ASTM F 1554 Gr. 55 WITH ASTM A194 Gr. 2H OR A 563 Gr. D

MEDIUM STRENGTH,MILD STEEL
SUPPLIMENTRY REQ. S1 OR BETTER

HIGH STRENGTH STEEL ASTM A 325 OR A 321 ASTM A 194 OR A 563, HEAVY HEX

ASTM A 194 Gr. 2H OR A 563 Gr. DH,

ALLOY STEEL ASTM A 193 Gr. B7
HEAVY HEX

SIZES :
DIAMETER LENGTH

12 MM DIA TO 90 MM DIA UPTO 3 METRES

 TGCA000000000 ACCESSORY SERIES
119

DUCT CORNER PIECE

G - CLAMP
HANGING ATTACHMENT
 TGBC000000000 BEAM CLAMP
120

SIZE RANGE: SERVICE:

3/8” and 1/2” or M10 and M12 Structural attachment to top or bottom of metal beams,
purlins,channels or angel iron
MATERIAL: APPROVAL:
Ductile Iron, Hardened Steel cup point set screw and lock nut.
Complies with Federal Specification A-A-1192A
(Type 19 & 23) WW-H-171-E (Type 23) and
FINISH: MSS-SP-69 (Type 19 & 23). MSS Since 1924 R

Plain, Electro-Galvanized & Zinc Flake.

RS A B LOAD
PRODUCT CODE
(INCH) (INCH) (INCH) (KG)

TGBC0000E0318 3/8 3/4 1 1/8 250

TGBC0000E0112 1/2 3/4 1 1/4 350

RS A B LOAD
PRODUCT CODE
(INCH) (INCH) (INCH) (KG)

TGBC0000E0010 M10 19 29 250

TGBC0000E0012 M12 19 31 350

NOTE: Available with threading & without threading

121 STANDARD STEEL BEAM CLAMP TGBC000000000

SERVICE: MATERIAL:
Designed for attaching a hanger rod to be centered Mild Steel
under beam flanges vertical adjusment is provided
in the clamp. Can be used with swivel unit when FINISH AVAILABLE:
connecting to inclined sections. Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

NPI b C MAX.VERTICAL DESIGN LOAD

PRODUCT CODE R ADJ. BOLT
MM MM MM KN
D MM
TGTBC0E080100 M12 80-100 64 84 51 M10 0.85
TGTBC0E120140 M12 120-140 66 80 51 M10 0.85
TGTBC0E160200 M12 160-200 90 100 51 M10 1.35
TGTBC0E000240 M12 240 106 100 51 M10 1.35

BOX STEEL BEAM CLAMP TGBBC00000000

SERVICE: MATERIAL:
Designed for attaching a hanger rod to be centered Mild Steel
under beam flanges. 51 mm vertical adjustment is FINISH AVAILABLE:
provided in the clamp.
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

NPI b C MAX.VERTICAL DESIGN LOAD

PRODUCT CODE R ADJ.
MM MM MM KN
D MM

TGBBC000E0010 M10 80-100 42-50 100 51 2.44

TGBBC000E0012 M12 120-140 58-66 100 51 3.78
 TGBBC00000000 BOX BEAM CLAMP
122

SERVICE: MATERIAL:
Designed for attaching a hanger rod to be Mild Steel
centered under beam flanges. 30 mm
vertical adjustment is provided in the clamp. FINISH AVAILABLE:
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

C DESIGN LOAD
PRODUCT CODE R
MM KN

TGBBC10E04060 M10 130 1.3/1.7

TGBBC12E04060 M12 130 1.3/1.8

TGBBC10E30100 M10 170 1.6
TGBBC12E60100 M12 170 2.3/1.7
TGBBC12E100120 M12 200 3.2/1.25

TGPBC00E00000 PURLIN BEAM CLAMP

SERVICE: MATERIAL:
Designed for attaching a M.10 hanger Malleable Iron
rod to the bottom flange of a z-purlin
FINISH AVAILABLE:
Electro-Galvanized

DESIGN LOAD
PRODUCT CODE
KN

TGPBC00E00010 1.78
123 SQUARE BOLT BEAM CLAMP TGSBC00000000

Type 1 Type 2

SERVICE:
Designed for establishing the suspension
systems to the NPI - NPH profiles.

MATERIAL:
Mild Steel

FINISH AVAILABLE:
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

APP.FRAMING
PRODUCT K t FZ CHANNELS PRODUCT K t FZ APP.FRAMING
CODE MM MM KN W H CODE MM MM KN CHANNELS
MM MM
TGSBC000E1008 M8 6 3.70 max.30 50 4522
TGSBC000E1010 M10 8 4.50 max.40 70 TGSBC000E2010 M10 8 4.50 4545
4560
TGSBC000E1012 M12 8 5.60 max.60 110
4590
TGSBC000E1016 M16 10 8.00 max.76 125 TGSBC000E2012 M12 8 5.60
45120
Loads per clamp pair. Loads per clamp pair.
 TGCF0000O0000 CEILING FLANGE
124

SERVICE:
Designed for attaching a hanger rod
to beam, ceiling or strut channel.

MATERIAL:
Mild Steel
FINISH AVAILABLE:
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

PRODUCT L W Ød C DESIGN
R
CODE MM MM MM MM LOAD

TGCF0000E0010 M10 110 50 11 65 3.5

TGCF0000E0012 M12 152 50 13 100 5.2
TGCF0000E0016 M16 152 50 13 100 9.71
TGCF0000E0020 M20 152 50 18 100 14.37
TGCF0000E0022 M22 203 76 18 125 19.93
TGCF0000E0024 M24 203 76 18 125 26.24

PLATE
SERVICE:
Designed for attaching unstallation plate.

MATERIAL:
Mild Steel
FINISH AVAILABLE:
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

Ød A t C
MM MM MM MM

11 100 6 25
11 150 8 25
13 200 10 25
23 250 12 35
23 300 15 35
125 WELDING BEAM ATTACHMENT TGWBA00000000

SERVICE: MATERIAL:
Designed for attaching a hanger rod to bottom of Mild Steel
structural steel where heavy load and large hanger
rod size are required. can be welded in place in FINISH AVAILABLE:
either the upright or inverted position.
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

DESIGN LOAD
PRODUCT R K B C Ød E
KN
CODE ROD MM MM MM MM MM 350° 400°

TGWBA000E0010 M10 M10 72 22 14 32 3.25 2.54

TUWBA000E0012 M12 M12 72 22 18 32 6.00 4.70

TGWBA000E0016 M16 M16 72 22 22 32 9.61 7.52

TGWBA000E0020 M20 M20 78 28 24 38 14.37 11.25

TGWBA000E0022 M22 M22 108 32 30 50 19.93 15.60

TGWBA000E0024 M24 M24 113 38 32 50 26.24 20.55

TGWBA000E0027 M27 M27 113 38 34 70 33.14 25.93

TGWBA000E0030 M30 M30 126 51 38 76 42.25 33.09

TGWBA000E0036 M36 M36 163 63 44 89 61.38 48.07

TGWBA000E0042 M42 M42 195 70 50 95 82.73 64.79

TGWBA000E0048 M48 M48 207 82 60 95 109.42 87.29

 TGUA000000000 UPPER ATTACHMENT
126

SERVICE: MATERIAL:
Designed for to be used in steel Mild Steel
construction structures as a
suspension material. FINISH AVAILABLE:
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

PRODUCT R B C D Ød ADJUSMENT DESIGN LOAD

MM MM MM MM MM H WITH BOLTS
CODE
KN

TGUA0000E0010 M10 100 79 86 11 70 3.25

TGUA0000E0012 M12 136 105 92 14 70 6.00

TGUA0000E0016 M16 150 114 94 18 68 9.61

TGUA0000E0020 M20 168 117 121 23 89 14.37

TGUA0000E0022 M22 184 133 125 23 90 19.93

127 SINGLE LUG PLATE TGSLP00000000

SERVICE: FINISH AVAILABLE:

Designed for attachment to structural steel. Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.
MATERIAL:
Mild Steel

SHORT LONG
PRODUCT Ød R H H W DESIGN LOAD
CODE MM MM MM MM MM kN

TGSLP000ES018 18 32 38 76 63 6.00

TGSLP000ES020 20 32 38 76 63 9.60

TGSLP000ES024 24 32 38 76 63 14.40

TGSLP000ES028 28 32 51 76 63 19.90

TGSLP000ES032 32 38 51 76 76 26.20

TGSLP000ES036 36 38 76 102 76 33.10

TGSLP000ES038 38 51 76 102 102 42.20

TGSLP000ES044 44 64 76 114 127 61.40

TGSLP000ES050 50 64 76 114 127 82.70

TGSLP000ES060 60 76 102 114 152 109.50

 TGCRP00000000 CONCRETE ROD ATTACHMENT PLATE
128

SERVICE: MATERIAL:
Structural attachment to concrete ceilings Mild Steel
where vertical adjustment is desired.
Normally used with threaded rod and nut. FINISH AVAILABLE:
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

DESIGN LOAD
PRODUCT R B C D E Ød WITH
CODE MM MM MM MM MM MM BOLT
kN

TGCRP000E0010 M10 200 250 125 73 14 3.20

TGCRP000E0012 M12 200 250 125 73 14 6.00

TGCRP000E0016 M16 200 250 125 73 14 9.50

TGCRP000E0020 M20 200 250 125 80 18 14.30

TGCRP000E0022 M22 200 250 125 108 18 19.90

TGCRP000E0024 M24 200 300 150 114 20 26.20

TGCRP000E0027 M27 200 300 150 121 24 33.10

TGCRP000E0030 M30 200 300 150 127 24 42.20

TGCRP000E0036 M36 200 300 150 165 28 61.30

129 CONCRETE ATTACHMENT PLATE TGCAP00000000

SERVICE: MATERIAL:
Structural attachment to concrete ceilings Mild Steel
where vertical adjustment is desired.
Normally used with threaded rod and nut. FINISH AVAILABLE:
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

DESIGN LOAD
PRODUCT B C D Ød G WITH
P
CODE MM MM MM MM MM BOLT
kN

TGCAP000E0012 M12 200 250 125 14 32 3.20

TGCAP000E0016 M16 200 250 125 14 32 6.00

TGCAP000E0020 M20 200 250 125 14 32 9.50

TGCAP000E0022 M22 200 250 125 18 38 14.30

TGCAP000E0024 M24 200 250 125 18 50 19.90

TGCAP000E0027 M27 200 300 150 20 50 26.20

TGCAP000E0030 M30 200 300 150 24 70 33.10

TGCAP000E0036 M36 200 300 150 24 75 42.20

TGCAP000E0042 M42 200 300 150 28 90 61.30

FLEXIBLE EXPANSION JOINTS
 TGSPH00000000 SPRING HANGER
44

APPLICATION: FEATURES:
SPRING HANGERS are used to isolate suspended sources of SPRING HANGERS consist of freestanding;laterally stable steel
both noise and vibration. Suspended mechanical equipment springs in series with a moulded elastomeric element assemble
such as air handling units, FCU's cabinet fans, piping and into a stamped and welded hanger bracket. The hanger brackets
ductwork in close proximity to rotating mechanical equipm- and the springs are powder coated. Spring Vibration isolation
ent are typical applications of model hangers. hangers are designed to provide high efficiency isolation from
structure-borne vibration and noise. Springs are colour-coded
according to load ratings and are designed for 50% overload.

RATED TOP
PRODUCT COLOUR LOAD DEFLECTION M L W H F HOLE
CODE CODE (KG) (MM) (MM) (MM) (MM) (MM) (MM) (MM)
TGSPH02500015 WHITE 15 20 53 57 38 70 10 12
TGSPH02500030 YELLOW 30 20 53 57 38 70 10 12
TGSPH02500050 PURPLE 50 20 53 57 38 70 10 12
TGSPH02500010 PURPLE 10 25 53 62 52 100 12 13
TGSPH02500015 YELLOW 15 25 53 62 52 100 12 13
TGSPH02500020 GREY 20 25 53 62 52 100 12 13
TGSPH02500040 LIGHT BLUE 40 25 53 62 52 100 12 13
TGSPH02500060 GREEN 60 25 53 62 52 100 12 13
TGSPH02500100 GREEN 100 25 83 90 65 125 14 15
TGSPH02500160 ORANGE 160 25 83 90 65 125 14 15
TGSPH02500200 RED 200 25 83 90 65 125 14 15
TGSPH02500250 PURPLE 250 25 83 90 65 125 14 15
TGSPH02500300 GREY 300 25 102 112 95 165 18 19
TGSPH02500400 ORANGE 400 25 102 112 95 165 18 19
TGSPH02500500 BROWN 500 25 102 112 95 165 18 19
TGSPH02500600 BLACK 600 25 102 112 95 165 18 19
TGSPH02500800 RED 800 25 102 112 95 165 18 19
TGSPH025001050 WHITE 1050 25 102 112 95 165 18 19
TGSPH025001250 GREEN 1250 25 102 112 95 165 18 19

Due to policy of continual improvement, the specifications are subject to change without prior notice.
Measurements are subject to 5% tolerance.
To achieve good sound suppressions do not over load fitting.
Compliance – Springs designed according to BS 1726 (Part 1) : 1987 and recommendations made by SAE (US)

APPLICATION EXAMPLES:
45 CLOSED SPRING MOUNT TGCSM00000000

DESIGN FEATURES:-
Colour coded spring to facilitate identification.
Powder coated springs.
Load upto 5000 kgs.
Deflection upto 25mm.
4 Models
26 Load Ranges
Deflection is at rated load with 15% Tolerances
All mounts have approximately 50% over load capacity.
Unique mount design provides horizontal stability, high loading capacity and protective spring enclosure.
All Mounts have external leveling casing arrangement, capable of compensating for full static deflection.
Inner walls of lower casing have resilient rubber snubbers which
- Eliminates possibility of binding by providing a smooth guide path for the top casing
- Limits lateral movement, particularly due to start up, start – up, shut – down and horizontal wind load
Prevents isolator short – circuiting by avoiding metal to metal contact.
Neoprene inserts below springs and 6 mm thick ribbed base pad act as noise breaks for high frequencies in the audible range,
which can otherwise get transmitted to building structure.
Mounting must be adjusted so that upper housing clears lower housing by at least 6mm & not more than 12mm

TYPICAL APPLICATION:
Application examples include – Chillers. AHU”S pumps, centrifugal / Axial Fans, Condensing Units, Rooftop Packaged units,
Reciprocating compressors , DG sets , Punch presses, Drop Hammers, Floor Pipe supports
( Normally at first few pipe supports points leading from isolated equipments.)

NOTE:
Custom load and deflection are also available.
Compliance – Springs designed according to BS 1726 (Part 1) : 1987 and recommendations made by SAE (US)

APPLICATION EXAMPLES:
 RUBBER SPRING COMBINATION HANGER TGSRH00000000

APPLICATION: FEATURES:
SPRING HANGERS are used to isolate suspended sources of SPRING HANGERS consist of freestanding; laterally stable steel
both noise and vibration. Suspended mechanical equipment springs in series with a moulded elastomeric element assemble
such as air handling units, FCU's cabinet fans, piping and into a stamped and welded hanger bracket. The hanger brackets
ductwork in close proximity to rotating mechanical equipm- and the springs are powder coated. Spring Vibration isolation
ent are typical applications of model hangers. hangers are designed to provide high efficiency isolation from
structure-borne vibration and noise. Springs are colour-coded
according to load ratings and are designed for 50% overload.

RATED TOP
PRODUCT COLOUR LOAD DEFLECTION M L W H F HOLE
CODE CODE (KG) (MM) (MM) (MM) (MM) (MM) (MM) (MM)
TGSRH05000010 PURPLE 10 50 53 62 52 150 12 13
TGSRH05000015 YELLOW 15 50 53 62 52 150 12 13
TGSRH05000020 GREY 20 50 53 62 52 150 12 13
TGSRH05000040 LIGHT BLUE 40 50 53 62 52 150 12 13
TGSRH05000060 GREEN 60 50 53 62 52 150 12 13
TGSRH05000100 GREEN 100 50 83 90 65 175 14 15
TGSRH05000160 ORANGE 160 50 83 90 65 175 14 15
TGSRH05000200 RED 200 50 83 90 65 175 14 15
TGSRH05000250 PURPLE 250 50 83 90 65 175 14 15
TGSRH05000300 GREY 300 50 102 112 95 215 18 19
TGSRH05000400 ORANGE 400 50 102 112 95 215 18 19
TGSRH05000500 BROWN 500 50 102 112 95 215 18 19
TGSRH05000600 BLACK 600 50 102 112 95 215 18 19
TGSRH05000800 RED 800 50 102 112 95 215 18 19
TGSRH05001050 WHITE 1050 50 102 112 95 215 18 19
TGSRH05001250 GREEN 1250 50 102 112 95 215 18 19

Due to policy of continual improvement, the specifications are subject to change without prior notice.
Measurements are subject to 5% tolerance.
To achieve good sound suppressions do not over load fitting.
Compliance – Springs designed according to BS 1726 (Part 1) : 1987 and recommendations made by SAE (US)

APPLICATION EXAMPLES:
 TECHNICAL SPECIFICATION
46

RATED
PRODUCT COLOUR DEFLECTION
LOAD
CODE CODE (MM)
(KG)
TGCSM00000060 BLUE 60 25
TGCSM00000100 GREEN 100 25
TGCSM00000160 ORANGE 160 25
TGCSM00000200 RED 200 25
TGCSM00000250 PURPLE 250 25
TGCSM00000300 GREY 300 25
TGCSM00000400 ORANGE 400 25
TGCSM00000500 BROWN 500 25
TGCSM00000500 BLACK 600 25
TGCSM00000800 RED 800 25
TGCSM00001050 WHITE 1050 25
TGCSM00001250 GREEN 1250 25
TGCSMII000600 GREY 600 25
TGCSMII000800 ORANGE 800 25
TGCSMII001050 BROWN 1000 25
TGCSMII001250 BLACK 1200 25
TGCSMII001600 RED 1600 25
TGCSMII002100 WHITE 2100 25
TGCSMII002500 GREEN 2500 25
TGCSMIV001200 GREY 1200 25
TGCSMIV001600 ORANGE 1600 25
TGCSMIV002000 BROWN 2000 25
TGCSMIV002400 BLACK 2400 25
TGCSMIV003200 RED 3200 25
TGCSMIV004200 WHITE 4200 25
TGCSMIV005000 GREEN 5000 25

Compliance – spring designed according to BS 1726 (PART

1): 1987 and recommendations made by SAE (US)
 RESTRAINED OPEN SPRING MOUNT TGROS00000000

F dia

B crs
G

J
A C
crs
H
Free
ht.

K E

The restrained open spring mounting has been designed specifically for applications where transmission of low frequency machinery
vibration to a building structure must be reduced to avoid physical damage or annoyance to the occupants.
Vertical and lateral restraint is provided to control movement of the mounted equipment when subjected to external forces. This
could otherwise be excessive due to the low stiffness Springs required to provide isolation of low frequency vibration.
Each System is individually designed & analyzed to ensure that the correct spring stiffness, system damping & masses are provided
to permit proper operation of the mounted equipment.
The springs have lateral spring stiffness greater than 1.0 times the rated vertical stiffness, and are designed to provide
a minimum of 50% overload capacity.

RATED DEFLECTION DIMENSIONS (MM)

PRODUCT COLOUR LOAD AT RATED
CODE CODE (KG) LOAD A B C D E F G H J K
TGROS02500030 Yellow 30 25
TGROS02500060 Green 60 25
TGROS02500100 Blue 100 25 113 150 75 170 12 M10 20 M8 50 42
TGROS02500160 White 160 25
TGROS02500250 Red 250 25
TGROS02500300 Purple 300 25
TGROS02500400 Grey 400 25
Orange 168 200 100 230 16 M16 40 M10 80 42
TGROS02500500 500 25
TGROS02500600 Brown 600 25
TGROS02500650 Yellow 650 25
TGROS02500800 Green 800 25
210 250 125 280 16 M16 50 M12 90 45
TGROS02501050 Blue 1050 25
TGROS02501250 White 1250 25
TGROS02501300 Red 1300 25
TGROS02501600 Purple 1600 25
Grey 234 280 180 330 21 M24 50 M16 140 45
TGROS02502000 2000 25
TGROS02502300 Brown 2300 25
TGROS05000100 Yellow 100 50
TGROS05000200 Green 200 50
TGROS05000300 Blue 300 50 168 200 100 230 16 M16 40 M12 80 42
TGROS05000400 White 400 50
TGROS05000500 Red/Black 500 50
TGROS05000510 Black/Purple 510 50
TGROS05000760 Black/Grey 760 50
251 280 180 330 21 M24 50 M16 140 62
TGROS05001000 Black/Orange 1000 50
TGROS05001300 Black/Brown 1300 50

*Spring Stiffness is linear over its working range.

Ÿ Due to policy of continual improvement, the specifications are subject to change without prior notice.
Ÿ Measurements are subject to 5% tolerance.
Ÿ To achieve good sound suppressions do not over load fitting.
Ÿ Compliance – Springs designed according to BS 1726 (Part 1) : 1987 and recommendations made by
SAE (US)
47 OPEN SPRING MOUNTINGS TGOSM00000000

This unique range of open spring mounting uses an integral rubber and fixing of the spring
which sets them apart from all other designs. Loose spring and plats are now history and high
frequency and noise attenuation is provided regardless of whether rubber seating pad is used
or not.
Originally designed for use with type IPF inertia pouring frames the mountings are now widely
used to isolate vibration from every conceivable type of rotating and reciprocating machine.
Some examples being air handing units axial and centrifugal fans, low level pipe work.
Ductwork condensing units, pumps generating sets, chillers, etc. where control of transient
motion is required, Open spring mountings can be used in conjunction with our viscous
dampers type.

DESIGN FEATURES:
Unique expanding rubber and fixing of spring which also provides
high frequency attenuation Spring with 50% overload capacity.
Can be bolted to supporting structure or free standing
on 6 mm thick rubber pad.
Fully height adjustable
Zinc plated metals
No snubbing gives maximum efficiency.

SIZE LOAD RANGE NOMINAL DEFLECTION

(KG) (MM)

TGOSM00000025 30-2300 25
TGOSM00000050 510-1300 50

ISOLATION EFFICIENCY AT TYPICAL MACHINE SPEEDS:

M/C SPEED EFFICIENCY %

(RPM) 15 MM DEFL 25 MM DEFL 50 MM DEFL

300 DO NOT USE 34.0 75.2

500 68.7 83.3 92.3
150 88.1 93.2 96.7
1000 93.7 96.3 98.2
1200 95.5 97.4 98.7
1500 97.3 98.4 99.2
1750 98.0 99.8 99.4
2000 98.5 99.1 99.5

These above figures are theoretical values only based on the vertical natural frequency of the spring system assuming in infinity
stiff structural supports. The effects of high frequency spring coil resonances on low frequency performance are also ignored.
Due to policy of continual improvement, the specifications are subject to change without prior notice.
Measurements are subject to 5% tolerance.
To achieve good sound suppressions do not over load fitting.
Compliance – Springs designed according to BS 1726 (Part 1) : 1987 and recommendations made by SAE (US)

APPLICATION EXAMPLES:
 INSTALLATION INSTRUCTION
48

RATED DEFLECTION DIMENSIONS (MM)

PRODUCT COLOUR LOAD AT RATED
CODE CODE (KG) LOAD A B C D E F G H J

TGOSM02500030 YELLOW 30 25
TGOSM02500060 GREEN 60 25
TGOSM02500100 BLUE 100 25 115 85 70 110 10 M10 10 20 55
TGOSM02500160 WHITE 160 25
TGOSM02500250 RED 250 25
TGOSM02500200 RED 200 25
TGOSM02500300 PURPLE 300 25
TGOSM02500400 GREY 400 25
TGOSM02500500 ORANGE 500 25 160 110 100 140 11 M16 12 27 75
TGOSM02500600 BROWN 600 25
TGOSM02500700 ORANGE 700 25
TGOSM02500800 BLACK 800 25
TGOSM05000100 YELLOW 100 50
TGOSM05000200 GREEN 200 50
TGOSM05000300 BLUE 300 50 188 110 100 140 11 M16 12 27 75
TGOSM05000400 WHITE 400 50
TGOSM05000500 BLACK 500 50
TGOSM02500650 YELLOW 650 26
TGOSM02500850 GREEN 850 27 182 110 110 140 11 M16 12 27 75
TGOSM02501050 BLUE 1050 26
TGOSM02501250 WHITE 1250 26
TGOSM02501300 RED 1300 27
TGOSM02501600 PURPLE 1600 25 225 210 150 250 18 M24 16 51 75
TGOSM02502000 GREY 2000 26
TGOSM02502300 BROWN 2300 29
TGOSM05000510 PURPLE 510 51
TGOSM05000760 GREY 760 51 240 210 150 250 18 M20 16 42 72
TGOSM05001000 ORANGE 1000 50
TGOSM05001300 BROWN 1300 53

*Spring Stiffness is linear over its working range.

Due to policy of continual improvement, the specifications are subject to change without prior notice.
Measurements are subject to 5% tolerance.
To achieve good sound suppressions do not over load fitting.
Compliance – Springs designed according to BS 1726 (Part 1) : 1987 and recommendations made by SAE (US)
49 INERTIA BASE TGIB000000000

INTRODUCTION:
Inertia Base should be used where the machine to be vibration isolated produces large unbalanced forces which
would result in excessive motion if supported directly on spring or rubber based isolators. They should also be used
where the machine is subject to external forces or is inherently unstable.
Saketh's Inertia Base come in several standard sizes as listed in our catalogue. However these bases can also
manufactured to any size and specifications, even for heavier and more complex vibration isolation would normally
recommend 6 isolators or more for exceptionally large bases.

EXAMPLES OF EQUIPMENT REQUIRING INERTIA BASE ARE AS FOLLOWS:-

Reciprocating Compressors
Diesel Generating Sets
Engine / Dynamometer Test Rigs
Refrigeration Plants
Pumps (Particularly Belt Driven Types)

FEATURES:-
Fully welded steel construction with integral concrete reinforcement fixed at 40 mm above bottom of frame.
Recessed height reducing corner brackets designed to accept standard Saketh's type SEOS open spring mountings.
Range of standard size frames available in three thicknesses 150, 200, 300 & 350 mm.
Frame thicknesses not less than L/12 where 'L' is the longest side of the frame.
Finished with a single coat of red oxide primer on external surface only.

Due to policy of continual improvement, the specifications are subject to change without prior notice.
Measurements are subject to 5% tolerance.
To achieve good sound suppressions do not over load fitting.

APPLICATION EXAMPLES:
 TECHNICAL SPECIFICATIONS
50

ORDERING INFORMATION REQUIRED:-

Ÿ Equipment Model / Make
Ÿ HP/ RPM Of motor
Ÿ Static weight of equipment.
Ÿ Operating / Dynamic weight of equipment
Ÿ Outside Dimensions L X B X H
Ÿ Concrete Plinth Y/N.
Ÿ Height / Space constraint if any
Ÿ Required Deflection offspring(25 mm /50mm)
Ÿ Location- Ground / Roof / Basement.

NOTES:
Frame weights include concrete density at 2400 kg/m3 and mounting selections are base allowing 50% additional weight for the
equipment to be supported Nominal 25 mm deflection type (open Spring Isolators) have been listed, however the exact deflection
will vary depending on the applied load. When ordering bases should be specified as follows - 150 - 600 X 900 other size .Type and
Thickness required and plan dimensions commencing with smallest length. Mounting should also be listed e.g. “25/100 - BULE”

IMPORTANT:
The equipment should be located on the base such that the load is evenly distributed over the 4 mountings. Equipment and ancillary
parts should not overhang frame and hold down 100 mm from the outer edge of the bolts must not be at a distance less than base.
All the connections to the equipment should incorporate flexible sections and pipe work etc. must independently supported. Concrete
plinth if any should be at least 200 mm more than the size of base in all directions. In case of installation of snubbers it should be
increased to 300 mm.

AVAILABLE FRAME SIZES:

SR. NO FRAME SIZE THICKNESS AVAILABLE
1 600 x 600 50 MM 100 MM 150 MM
2 600 x 750 50 MM 100 MM 150 MM
3 600 x 900 50 MM 100 MM 150 MM
4 600 x 1200 50 MM 100 MM 150 MM
5 600 x 1500 50 MM 100 MM 150 MM
6 700 x 700 50 MM 100 MM 150 MM
7 700 x 900 50 MM 100 MM 150 MM
8 700 x 1200 50 MM 100 MM 150 MM
9 700 x 1400 50 MM 100 MM 150 MM
10 700 x 1600 50 MM 100 MM 150 MM
11 800 x 800 50 MM 100 MM 150 MM
12 800 x 1000 50 MM 100 MM 150 MM
13 800 x 1200 50 MM 100 MM 150 MM
14 800 x 1600 50 MM 100 MM 150 MM
15 1200 x 1600 50 MM 100 MM 150 MM
16 800 x 1800 50 MM 100 MM 150 MM
17 900 x 1800 50 MM 100 MM 150 MM
18 1000 x 1000 50 MM 100 MM 150 MM
19 1000 x 1200 50 MM 100 MM 150 MM
20 1000 x 1500 50 MM 100 MM 150 MM
21 1000 x 1700 50 MM 100 MM 150 MM
22 1000 x 2000 50 MM 100 MM 150 MM
23 1200 x 2200 50 MM 100 MM 150 MM
NOTE : - Any non standard siz inertai base can be manufacture suitable to pump & motor assembly.
- Selection of vibration isolators is base on motor & pump weigh.

APPLICATION EXAMPLES:
51 RUBBER HANGER TGRH000000000

POINT LOAD DEFLECTION ROD SIZE

PRODUCT CODE
KGS MM MM
TGRH000000010 10 8 10
TGRH000000020 20 8 10
TGRH000000030 30 8 10
TGRH000000050 50 8 10
TGRH000000070 70 10 10
TGRH000000120 120 10 10

40 MM G CLAMP TGGC000000000

BOLT: M10 X 25 MM
MATERIAL: Mild Steel
THICKNESS: 3.0 MM
FINISH: Electro-Galvanized
DIMENSIONS: Mention in above drawing

APPLICATION EXAMPLES:
 TGDM000000000 DUCT MOUNT
52

TYPICAL APPLICATIONS

Duct Mount consist of a resilient rubber mount SUSPENSION OF FLOOR MOUNTING OF

held between two plated steel caps
Fan Coil Units (using rubber element only)
For uniform distribution of load.If has an integral
extended rubber sleeve which prevents direct Pipes Refrigerators
metal-to-metal contact,thereby minimising Ducts Domestic Appliances
transmission of noise and vibration. Brackets Industrial Equipments
Light Weight Equipment

POINT LOAD DEFLECTION ROD SIZE

PRODUCT CODE
KGS MM MM

TGDM0S0000050 50 4 10
TGDM0B0000100 100 4 10

APPLICATION EXAMPLES:
53 TURRET MOUNT TGTM000000000

TURRET MOUNT rubber mountings are designed to provide superior attenuation of medium to high frequency vibration and noise
emanating from wide range of motor driven machines particularly axial and centrifugal fans, high resilience rubber with low dynamic
to static stiffness ratio ensures maximum efficiency, good creep performance and long service life.

DESIGN FEATURES:
Moulded in first grade natural rubber with integral steel base and upper fixing boss.
Also available with oil & environment resistant durable neoprene/Nitrile Rubber.
Manufactured in three sizes, each available in three rubber compounds identified by a colour spot.
Static deflections of up to 8mm with loads from 5kg to 400 kg.

TYPICAL APPLICATIONS:
Axial and Centrifugal Fans
Air Handling Units
Air Conditioning equipments
Packaged Air Conditioners
Floating Floors
Generators & Mobile Equipments
Pumps & Refrigeration Plants
Rotary and Multi Cylinder Compressors.

NOTE: Turret mountings should not be used on machines exhibiting high out of balance forces without restraining bolt.

PRODUCT COLOUR RATE LOAD DEFLECTION NOMINAL DIMENSION (MM) APPROX

CODE CODE (KG) AT RATE A B C D E F G H J WT. (KG)

TGTM0100Y0028 YELLOW 28
TGTM0100B0050 BLUE 50 6 80 57 45 9 12 32 5 41 M8 X 20 0.11
TGTM0100R0080 RED 80

TGTM0101Y0110 YELLOW 110

TGTM0101B0180 BLUE 180 8 95 71 60 9 14 45 5 56 M10 X 25 0.25
TGTM0101R0280 RED 280

TGTM0102Y0150 YELLOW 150

TGTM0102B0260 BLUE 260 8 150 115 86 11 22 70 6 82 M12 X 30 0.73
TGTM0102R0400 RED 400

Ÿ Due to policy of continual improvement, the specifications are subject to change without prior notice.
Ÿ Measurements are subject to 5% tolerance.
Ÿ To achieve good sound suppressions do not over load fitting
 TGAVP00000000 ANTI VIBRATION PADS
54

RIBBED MOUNTING PAD PRODUCT CODE SIZE (INCHES)

Specifications: TGRMP38003003 3/8’’ x 18’’ x 18’’
Ÿ Alternate High/ Low Ribbed Construction. TGRMP38004004 3/8’’ x 12’’ x 12’’
Ÿ Easy to Cut. TGRMP38006006 3/8’’ x 8’’ x 8’’
Ÿ Pads can be cut slightly larger than the size of leg of machines using shear or knife TGRMP38008008 3/8’’ x 6’’ x 6’’
Ÿ Easy Field Installation. TGRMP38012012 3/8’’ x 4’’ x 4’’
Ÿ Multiple layers of Ribbed Mounting Pad can be used to increase deflection. TGRMP38018018 3/8’’ x 3’’ x 3’’

WAFFLE PADS PRODUCT CODE SIZE (INCHES)

Specifications: TGWP034002002 3/4’’ x 18’’ x 18’’
Ÿ Designed within built suction cups. TGWP034004004 3/4’’ x 12’’ x 12’’
Ÿ Easy Cut design without tools allows job site flexibility TGWP034006006 3/4’’ x 8’’ x 8’’
Ÿ No need for bolting. TGWP034008008 3/4’’ x 6’’ x 6’’
Ÿ Easy field Installation. TGWP034012012 3/4’’ x 4’’ x 4’’
TGWP034018018 3/4’’ x 3’’ x 3’’

Ÿ Due to policy of continual improvement, the specifications are subject to change without prior notice.
Ÿ Measurements are subject to 5% tolerance.
Ÿ To achieve good sound suppressions do not over load fitting.

APPLICATION EXAMPLES:
55 ANTI VIBRATION PADS

CORK SANDWICH PADS PRODUCT CODE SIZE (INCHES)

Specifications:- TGCSP78003003 7/8’’ x 18’’ x 18’’
Ÿ Cork sandwich Pads are laminated pads having 1/2'' thick close grained cork securely TGCSP78004004 7/8’’ x 12’’ x 12’’
bonded between two layers of 1/4'' alternate low high ribbed Neoprene rubber pads.
TGCSP78006006 7/8’’ x 8’’ x 8’’
Ÿ Offers highest level of sound attenuation and vibration isolation.
TGCSP78008008 7/8’’ x 6’’ x 6’’
Ÿ No need for bolting.
TGCSP78012012 7/8’’ x 4’’ x 4’’
TGCSP78018018 7/8’’ x 3’’ x 3’’

METAL SANDWICH PADS PRODUCT CODE SIZE (INCHES)

Specifications:-
TGMSP78018018 7/8’’ x 18’’ x 18’’
Ÿ Metal Sandwich Pads are constructed of a steel plate bonded
TGMSP78012012 7/8’’ x 12’’ x 12’’
Ÿ Ribbed Anti Vibration Pads.
TGMSP78008008 7/8’’ x 8’’ x 8’’
Ÿ Designed for very high load capacity.
TGMSP78006006 7/8’’ x 6’’ x 6’’
TGMSP78004004 7/8’’ x 4’’ x 4’’
TGMSP78003003 7/8’’ x 3’’ x 3’’

Ÿ Due to policy of continual improvement, the specifications are subject to change without prior notice.
Ÿ Measurements are subject to 5% tolerance.
Ÿ To achieve good sound suppressions do not over load fitting.

APPLICATION EXAMPLES:
 TGSAF00000000 SINGLE ARC FLOATING FLANGE EXPANSION JOINT
56

This Rubber Expansion Joint is a totally effective Tembo’s solution for unwanted vibration in heating
and air conditioning systems. Available in the common HVAC, plumbing and Fire Fighting pipeline
sizes, it is ideal for motion compensation, vibration elimination, and noise control and stress relief.
Manufactured to a fully moulded spherical design the style has a high pressure rating with the
added benefit of a non-clogging, long radius Arch. available in Natural rubber and many different
polymers like EPDM, Neoprene, and Butyl Having a wide range of flange drilling standards to your
building services requirements.
This Floating Flange is designed as per the latest International Standards of FSA & EJMA (USA) are
used all over the world. Further, the most beneficial advantage is that if replacement is required it
can be replaced without distributing the welded flange due to floating / rotating flange design.

OPERATING CONDITION
PRODUCT SIZE I.D STANDARD EXPRESSION
F/F LENGTH AXIAL ELONGATION LATERAL ANGULAR
CODE (MM) (MM) COMPOSIT JOINTS STYLE
ION (MM) (MM) (MM) DEGREES
TGSAF00000073 65 150 13 12 13 15" SI 400
TGSAF00000089 80 150 13 12 13 15" SI 400
TGSAF00000114 100 150 16 12 16 15" SI 400
TGSAF00000141 125 150 16 12 16 15" SI 400
TGSAF00000168 150 150 16 12 16 15" SI 400
TGSAF00000219 200 150 16 12 16 15" SI 400
TGSAF00000273 250 200 16 15 16 15" SI 400
TGSAF00000323 300 200 16 15 16 15" SI 400
TGSAF00000356 350 200 16 15 16 15" SI 400

TEMPERATURE / PRESSURE RATINGS :-

Maximum Temperature Maximum o
115 C ( Neoprene /EPDM ) 16 bar
Pressure Rating
Working pressure depends on temperature and at higher temperature and at
higher temperature , the pressure ratings are reduced slightly

FLANGE DRILLING TO
BS table D/ E/ F ANSI B16.5 Class 125/ 150 BS 4504 / DIN 2501 or as per customer requirement
ELASTOMERS
Neoprene - Provides excellent resistance to oxidation, ozone and sunlight ageing. Good resistance to oil.
EPDM
Good for hot and cold water service and chemicals.
FLANGES
Expansion joints are furnished with zinc plated steel flanges.They rotate easily on the bellow which allows for simple bolt alignment.
CONTROL UNITS
Tie rods and gusset plates are normally recommended and can be supplied along with the bellows.
WARNINGS :
Control unit must be used unless piping is properly anchored. When Expansion joints are installed pipelines or equipment carrying
fluids and gases at a elevated temperatures and precautions should be taken to ensure proper installation and regular inspection .
Care is required to protect personnel in the event of leakage or splash.
NOTE : Maximum pressure rating is based on 40 C operating temperature.
Due to policy of continual improvement, the specification are subject to change without prior notice.
Measurements are subject to 5% tolerance.

APPLICATION EXAMPLES:
57 DOUBLE ARC FLOATING FLANGE EXPANSION JOINT TGDAF00000000

This Rubber Expansion Joint is a totally effective Tembo's solution for unwanted vibration in
heating and air conditioning systems. Available in the common HVAC, Plumbing and Fire Fighting
pipeline sizes, it is ideal for motion compensation, vibration elimination, and noise control and
stress relief.
Manufactured to a fully moulded spherical design the style has a high pressure rating with the
added benefit of a non-clogging, long radius Arch. Available in Natural rubber and many different
polymers like EPDM, Neoprene, Nitrile, and Butyl having a wide range of flange drilling standards
to your building services requirements.
This Floating Flange is designed as per the latest International Standards of FSA & EJMA (USA)
which are used all over the world. Further, the most beneficial advantage is that if replacement is
required it can be replaced without distributing the welded flange due to floating/rotating flange
design.

OPERATING CONDITION
STANDARD AXIAL EXPRESSIO
SIZE I.D F/F LENGTH COMP N ELONGATION LATERAL ANGULAR N JOINTS
(MM) (MM) (MM) (MM) (MM) DEGREES STYLE
25 150 13 12 13 15° SI 400
32 150 13 12 13 15° SI 400
40 150 13 12 13 15° SI 400
50 150 13 12 13 15° SI 400
65 150 13 12 13 15° SI 400
80 150 13 12 13 15° SI 400
100 150 16 12 16 15° SI 400
125 150 16 12 16 15° SI 400
150 150 16 12 16 15° SI 400
200 150 16 12 16 15° SI 400
250 200 16 15 16 15° SI 400
300 200 16 15 16 15° SI 400
350 200 16 15 16 15° SI 400
TEMPERATURE / PRESSURE RATINGS :-
Maximum Temperature Maximum 115oC ( Neoprene /EPDM ) 16 bar
Pressure Vacuum Rating
Working pressure depends on temperature and at higher temperature and at
higher temperature , the pressure ratings are reduced slightly
FLANGE DRILLING TO
BS table D/ E/ F ANSI B16.5 Class 125/ 150 BS 4504 / DIN 2501 or as per customer requirement
ELASTOMERS
Neoprene - Provides excellent resistance to oxidation, ozone and sunlight ageing. Good resistance to oil.
EPDM
Good for hot and cold water service and chemicals.
FLANGES
Expansion joints are furnished with zinc plated steel flanges.They rotate easily on the bellow which allows for simple bolt alignment.
CONTROL UNITS
Tie rods and gusset plates are normally recommended and can be supplied along with the bellows.
WARNINGS :
Control unit must be used unless piping is properly anchored. When Expansion joints are installed pipelines or equipment carrying fluids
and gases at a elevated temperatures and precautions should be taken to ensure proper installation and regular inspection . Care is req-
uired to protect personnel in the event of leakage or splash.
NOTE : Maximum pressure rating is based on 40 C operating temperature.
Due to policy of continual improvement, the specification are subject to change without prior notice.
Measurements are subject to 5% tolerance.
APPLICATION EXAMPLES:
 RUBBER EXPANSION JOINTS
58

Ÿ Due to policy of continual improvement, the specifications are subject to change without prior notice.
Ÿ Measurements are subject to 5% tolerance.
Ÿ To achieve good results do not over load fitting more than designed parameters as per drawing / catalogue
59 HOW A RUBBER EXPANSION JOINTS WORKS

The purpose of an Expansion joints in general, regardless of design or materials

of construction, is to provide a point of flexibility in a piping or duct system in
order to absorb the growth of the piping due to thermal changes in the media
and/or the environment, and to absorb the dynamic movements of machinery,
buildings and structures that the piping is attached to or a part of.

The Rubber Expansion joints, because of the non-metallic nature of its

construction, offers the piping and ductwork designer advantages within the
temperature and pressure ranges of these joints, which cannot be matched by
all metal expansion, joints. Consisting of flanged ends and a flexible section,
much the same as a flanged metal bellows, the rubber expansion joints can
absorb within its free length more movements, particularly lateral, than any
other joint of similar overall size and pressure rating.

The flexible section of a Rubber Expansion Joints is most often a single

convolution, which, because of the inherent flexibility of the material, can
accept large lateral movements with low force, phenomena which requires
multiple convolutions in metal bellows. During axial and angular movements,
the rubber convolution deflects much the same way that the metal convolution
does. The limits of these motions are determined by the geometric shape and
size of the convolution and the inherent pressure resisting capacity of the
design.

The manner in which the pressure loads are resisted in a Rubber Expansion
joints is the major difference between Rubber and Metal Bellows.
Circumferential (hoop) loads due to pressure are carried by the convolution
itself in metallic bellows. In a Rubber Expansion joint, the convolution is
basically incapable of resisting pressure by itself, but is supported by the djacent
rubber tube with its internal fabric and / or fabricmetal reinforcing, or by the
attachment flanges themselves.

All Tembo's Units have integrally moulded flanges, sized and drilled to much
standard flanges. All Rubber Expansion joints require metallic split retaining
rings behind the flanges to back up protect the rubber integral flanges. Control
rods must be used to protect expansion joints from excessive movement if
piping system is not properly anchored and are normally recommended for most
piping installations.

ŸDue to policy of continual improvement, the specifications are subject to change without prior notice.
ŸMeasurements are subject to 5% tolerance.
ŸTo achieve good results do not over load fitting more than designed parameters as per drawing / catalogue
 TGTFC00000000 FLEXIBLE PIPE CONNECTORS-TRIANGULAR TYPE
60

APPLICATION:
Ÿ Inlet and outlet of fan coil Units, Air Handling Units, Chillers and Condensers.
Ÿ Air Suction and discharge of pumps.
Ÿ Intervals in Chilled water piping .
Ÿ Installation of flexible Pipe Connectors is recommended to allow for axial pipe movement due to thermal expansion or contraction,

thereby protecting the building structure from damaging stress. These connectors also help to isolate the low and high frequency
vibration transmitted through pipe walls.
Ÿ The triangular flange design offer much better reliability, safety and convenience as compared to union type connectors.
Ÿ Allows for both Axial and Horizontal movement.
Ÿ Unique pressurized steel wire strand for addiitional safely.

CONSTRUCTION FEATURES:
Bellow : Neoprene / EPDM

Reinforcement : Nylon cord fabric

Pressurized Ring : Steel Wire Strand

Flanges : Forged Steel, Threaded to BS 21. NPT on request

: Epoxy powder coated for corrosion resistance

: Nut and bolts electrogalvanized.

: Floating triangular thread design

TECHNICAL DATA:
Working Pressure : 290 psi / 20 Bar

Temperture Range : -15 deg C to 115 deg C .

Working Media : Water, Compressed Air, Oil, Weak Acids / Alkalines

PRODUCT SIZE AXIAL DISPLACEMENT LENGTH DEFLECTION

CODE INCHES ELONGATION COMPRESSION MM ANGLE
TGTFC00000027 3/4” 6 22 160 45
TGTFC00000034 1" 6 22 160 45
TGTFC00000042 1 1/4” 6 22 160 45
TGTFC00000048 1 1/ 2” 6 22 160 45
TGTFC00000060 2” 6 22 180 45
61 FLEXIBLE PIPE CONNECTOR - UNION TYPE TGUFC00000000

APPLICATION:
Ÿ Inlet and outlet of fan coil Units, Air Handling Units , Chillers and Condensers.
Ÿ Air Suction and discharge of pumps.
Ÿ Intervals in Chilled water piping .
Ÿ Installation of flexible Pipe Connectors is recommended to allow for axial pipe movement due to thermal expansion or contraction,
thereby protecting the building structure from damaging stress. These connectors also help to isolate the low and high frequency
vibration transmitted through pipe walls.
Ÿ Allows for both Axial and Horizontal movement.
Ÿ Unique pressurized steel wire strand for addiitional safely.

CONSTRUCTION FEATURES:
Bellow : Neoprene / EPDM
Reinforcement : Nylon cord fabric
Pressurized Ring : Steel Wire Strand
Flanges : Forged Steel, Threaded to BS 21. NPT on request
: Epoxy powder coated for corrosion resistance
: Nut and bolts electrogalvanized.
: Floating triangular thread design

TECHNICAL DATA:
Maximum Pressure : 250 psi / 17 Bar
Burst pressure : 650 psi / 45 bar
Temperature Range : -15 deg C to 115 deg C.
Working Media : Water Compressed Air, Oil , Weak Acids / Alkaline.
Vacuum : 700 mm Hg

CONNECTION : FEMALE THREAD BOTH SIDES

AXIAL DISPLACEMENT
PRODUCT SIZE LENGTH DEFLECTION
INCHES MM ELONGATION COMPRESSION ANGLE
CODE
( mm ) ( mm )
TGUFC00000022 1/2" 155 6 22 45
TGUFC00000027 3/4" 155 6 22 45
TGUFC00000034 1" 155 6 22 45
TGUFC00000042 1 1/4" 155 6 22 45
TGUFC00000048 1 1/2" 175 6 22 45
TGUFC00000060 2" 175 6 22 45
TGUFC00000073 2 1/2" 240 10 24 45
 TGMEB00000000 METALLIC EXPANSION JOINTS
62

Bellows are a flexible piping element. The corrugation of the expansion joint is designed to be flexible in order to absorb pipe
expansion and contraction due changes in temperature. The number of corrugation of bellows is decided according to the
displacement amount and the expansionary and contracting force that the bellows have to absorb. Bellows have to be strong to the
design pressure an operating pressure of piping and pressure and installation and they also have to be flexible to absorb thermal
movement. The thrust force of the flow In the piping has to be buttressed by things other than bellow.

Tembo Industries bellows are fabricated from cylindrical tubes made of high ductility material. The cylindrical body is formed onto
parallel corrugation which accommodates all basic movements without encountering wear and tear as associated with conventional
mechanical devices. Bellows are designed and manufactures as per the latest additional of EJMA, ASME, GIS, BS, DIN, IS standards
under the supervision of highly qualified team of engineers and technocrats.

To attain high flexibility and above average life expectancy, our Bellows are made from tested S.S. 316 / 321 / 304 stainless steel
material. These bellows retain the flexibility when subject to internal pressure. Tembo's Industries Bellows have been their out
standing performance in a wide variety of application

Ÿ Due to policy of continual improvement, the specifications are subject to change without prior notice.
Ÿ Measurements are subject to 5% tolerance.
Ÿ To achieve good results do not over load fitting more than designed parameters as per drawing / catalogue

APPLICATION EXAMPLES:
63 STAINLESS STEEL METALLIC EXHAUST BELLOW TGMEB00000000

PRODUCT CODE MAXIMUM LATERAL AXIAL

DESIGN WORKING
NOMINAL BORE MOVEMENT MOVEMENT
TEMPERATURE
X PRESSURE PRESSURE PRESSURE
UPTO
OVERALL LENGTH (KG/CM2) (MM) (MM)
TGMEB006S0200 600°C 20 20 ±10
TGMEB006S0250 600°C 20 40 ±15
TGMEB006S0300 600°C 20 60 ±20
TGMEB006S0300 600°C 20 20 ±10
TGMEB008S0250 600°C 20 40 ±15
TGMEB008S0300 600°C 20 60 ±20
TGMEB010S0200 600°C 20 20 ±10
TGMEB010S0250 600°C 20 40 ±15
TGMEB010S0300 600°C 20 60 ±20
TGMEB012S0200 600°C 20 20 ±10
TGMEB012S0250 600°C 20 40 ±15
TGMEB012S0300 600°C 20 60 ±20
TGMEB014S0200 600°C 20 20 ±10
TGMEB014S0250 600°C 20 40 ±15
TGMEB014S0300 600°C 20 60 ±20
TGMEB016S0200 600°C 20 20 ±10
TGMEB016S0250 600°C 20 40 ±15
TGMEB016S0300 600°C 20 60 ±20
TGMEB018S0200 600°C 20 20 ±10
TGMEB018S0250 600°C 20 40 ±15
TGMEB018S0300 600°C 20 60 ±20
TGMEB020S0200 600°C 20 20 ±10
TGMEB020S0250 600°C 20 40 ±15
TGMEB020S0300 600°C 20 60 ±20
TGMEB022S0200 600°C 20 20 ±10
TGMEB022S0250 600°C 20 40 ±15
TGMEB022S0300 600°C 20 60 ±20
TGMEB024S0200 600°C 20 20 ±10
TGMEB024S0250 600°C 20 40 ±15
TGMEB024S0300 600°C 20 60 ±20

ŸMetallic of standard Metallic Bellow SA 240 TP 321, SA 240 TP 304 also available.
ŸMaterial of End Flanges IS 2062 Grade 2 ( Carbon Steel )
ŸCustom Made Bellows as per customer specification available for additional movements.
ŸEnd flanges as per customer s specification available.
ŸAccessories like nut bolts / gaskets / tie rods assembly / mating flanges available at extra cost.
ŸCompliance – Springs designed according to BS 1726 (Part 1) : 1987 and recommendations made by SAE (US)
 TGFMC00000000 FLEXIBLE METALLIC HOSE CONNECTIONS
64

Tembo manufactures Corrugated Hoses and Hose Assemblies at an ultra-modern facility under the supervision of a qualified team of
engineers and technocrats. They are suitable for wide range of chemicals, petroleum products, super heated steam, liquefied gas and
cooling lines.

SIZE: 1/4” (6mm) to 12” (300mm)

TEMPERATURE: -200O°C to 700O°C

MATERIAL: Hose S.S. 3016/321/304, Braiding S.S.304. End Connections

MATERIAL OF END CONNECTION: M.S., Carbon Steel, brass, NPTF, METRIC.

FLANGE: As per BS, ASA, DIN, Slipon, or as per your requirement.

END FITTINGS:
Manufactured from Mild Steel, Stainless Steel or Brass.These are fitted by Argon welding (TIG) or brazing on S.S. Hose depen-
ding upon hose type and service conditions to from a complete hose assembly
 SIZE SINGLE BRAID OUBLE BRAID
MAX. STATIC DYNAMIC MAX.
NOMINAL SIZE DN WORKING TEST BURST BEND BEND WORKING TEST BURST
PRESSURE PRESSURE BEND RADIUS RADIUS PRESSURE PRESSURE BEND
INCH MM (KG/CM2) (KG/CM2) (KG/CM2) (MM) (MM) (KG/CM2) (KG/CM2) (KG/CM2)

1/4" 6 100 150 400 25 100 160 240 640

3/8" 10 90 135 360 40 150 144 216 576

1/2" 12 80 120 320 50 200 128 192 512

5/8" 16 70 105 280 50 200 112 168 448

3/4" 20 64 96 256 70 200 102 153 408

1" 25 50 75 200 90 200 80 120 320

1 1/4" 32 40 60 160 110 250 64 96 256

1 1/2" 40 32 48 128 130 250 48 72 192

2" 50 28 42 112 175 350 44 66 176

2 1/2" 65 24 36 96 200 410 42 61 152

3" 80 18 27 72 205 450 28 42 112

4" 100 16 24 64 230 560 26 39 104

5" 125 12 18 48 280 660 20 30 80

6" 150 10 15 40 320 815 16 24 64

8" 200 8 12 32 435 1015 12 18 48

Ÿ Due to policy of continual improvement, the specifications are subject to change without prior notice.
Ÿ Measurements are subject to 5% tolerance.
Ÿ To achieve good results do not over load fitting more than designed parameters as per drawing catalogue
 FLEXIBLE METALLIC PUMP CONNECTOR
66

APPLICATION: Max.
Nominal I.D.
Overall Working
Tembo's stainless steel pump connectors have been optimally designed for use of S.S.
in pipe work systems for pumps or compressors and used to suppress noise, Length Pressure At
Braised
absorb vibration, to correct and accommodate for minor lateral misalignment Inch/mm Room
or thermal movements and to adjust for any building settlement. Bellow
Temp.(BAR)

1/2" 6"/150 16
CONSTRUCTION:
3/4" 6"/150 16
Manufactured with AISI 32 stainless steel corrugated tubing (to BS 6501pt.1)
with AISI 304 stainless steel single over braid & carbon or stainless steel end 1" 6"/150 16
fittings, TIG welded AISI 304/316 stainless steel Corrugated Hose also available. 1 1/4" 6"/150 16
1 1/2" 6"/150 16
2" 6"/150 16
END FITTINGS: 2 1/2" 6"/150 16
Screwed assemblies-Threaded BSP Taper Male Hexagon or Half Barrel Fittings 6"/150 16
3"
Flanged assemblies, to Bs10 table D/BS4504 & ANSI/ ASA standards.
4" 6"/150 16
5" 6"/150 16
6" 6"/150 16
INSTALLATION:
8" 6"/150 10
Braided pump connectors are not designed to absorb lateral movements and
vibration. For maximum efficiency the connectors should be placed in both the 10" 12"/300 4.5
pipe work on the away from the source. 12" 12"/300 4.5

Ÿ End flanges as per customer specification available

Ÿ Due to policy of continual improvement, the specifications are subject to change without prior notice.
Ÿ Measurements are subject to 5% tolerance.
Ÿ To achieve good results do not over load fitting more than designed parameters as per drawing/ catalogue
5 - COMPANY PROFILE
COMPANY PROFILE
 About Us

Wiltz Group is a leading supplier of high quality Building materials. The company employs a team
of leading specialists in this field with many years of experience in the construction industry in
Qatar and the Gulf region. Over the years we have been involved in many major construction
schemes throughout the region ranging from; airports, Apartments, schools, hospitals, and in
particular, government and municipality projects.

Wiltz Group represents world renowned manufacturers and suppliers to assist architects,
contractors and other clients to complete projects with the quality products required in today’s
very demanding market. While the focus of our activity is mainly on the promotion of products
from the UK, we are also agents for a number of companies throughout Europe, and the United
States, and continue to seek the representation of interesting and prestigious manufacturers to
compliment and diversify our range.

The highly professional staff is the key strength of the organization. The company is a committed
and trustworthy trading company, acquiring quality products to meet the critical demands of
today's construction industry.
Our experienced staffs work closely with architects and contractors, offering a comprehensive
service from initial design consultation through to installation and commissioning.
VISION
To be the trusted name and leader for the industrial solutions with a clear emphasis on client
satisfaction and innovation.

MISSION

 To provide quality industrial products supported by reliable technical solutions for the
industries.
 To drive all our efforts to treat our customers as partners to achieve customer
satisfaction.
 To provide our diverse team of professional with the dynamic work environment and
equal opportunities with growth & development.

OUR VALUES
Integrity – we conduct our business fairly, with honesty and transparency.
Accountability – we continue to be responsible, sensitive to the countries, communities and
environments in which we work, always ensuring that what comes from the people goes back to
the people many times over.
Excellency – we constantly strive to delight our customers with excellence in quality & service.
Unity – we work cohesively with our partners & customers building strong relationship based on
understanding & mutual cooperation.
Our Major Brands
OUR PRODUCTS:

 REMS  OPTIMUM
Pipe Threading machines Drill presses
Pipe Grooving attachments
Test Pumps  WILSON
Coring machines Gas welding machines and
Pipe Cutting machines accessories

 KONG SUNG  TOLSEN

Band Saws Hand tools

 EXACT  DEWALT
Pipe Cutting systems Power tools and Accessories

 TRAVAZA  NORMA
Pipe Grooving machines Hose clamps & Strip steel
Pipe Cutting machines
Pipe Threading machines  TEMBO SEVENSTAR
Pipe Bending machines Pipe Hangers
Pipe Hole saw machines Mechanical Anchors
PPR Welding machines
Threading oil  IFIX
Welding machines Conduit pipes and fittings
Hydraulic Cable Crimping and Adhesive tapes &
Cutting tools consumables
Lasers
Consumables  BOSS
Cable pulling winches and Jointing Compoud
rollers
Butt Welding machines
OUR FACTORY:

We manufacture:

• Cable trays and trunkings

• All kinds of steel fabrication
• Aluminium Scaffoldings
• Aluminium Ladders
6 - COMPANY ORGANIZATION CHART
❖ ORGANIZATIONAL CHART
Managing
Director

General
Manager

Customer
Finance Warehouse
Sales Manager Service
Manager Manager
Manager

Customer After Sales

Accountant Sales Executives Service Storekeepers Service Delivery Crew
Representatives Department

HR & Admin Technical

Technicians Drivers
Assistant Engineer

PRO
7 - COMPLIANCE STATEMENT
8 - VALID CR COPY
 ‫>‪<Bar Code‬‬
‫‪2022/01/22‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻟﻄﺒﺎﻋﺔ‪:‬‬
‫‪No 1 of 1‬‬ ‫ﺻﻔﺤﺔ ﺭﻗﻢ‪:‬‬

‫ﺭﺧﺼﺔ ﺗﺠﺎﺭﻳﺔ‬

‫*‪*91209‬‬
‫‪2015/03/19‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﺻﺪﺍﺭ ﺍﻟﺮﺧﺼﺔ‪:‬‬ ‫‪91209‬‬ ‫ﺭﻗﻢ ﺍﻟﺮﺧﺼﺔ‪:‬‬
‫‪2023/03/11‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻧﺘﻬﺎﺀ ﺍﻟﺮﺧﺼﺔ‪:‬‬ ‫ﻭﻳﻠﺘﺰ ﺗﺮﺍﻳﺪﻳﻨﻎ ﺍﻧﺪ ﻛﻮﻧﺘﺮﺍﻛﺘﻴﻨﻎ ﻣﺮﻫﻮﻥ ﻟﺼﺎﻟﺢ‬ ‫ﺍﻷﺳﻢ ﺍﻟﺘﺠﺎﺭﻯ‪:‬‬
‫ﺑﻨﻚ ﻗﻄﺮ ﺍﻟﻮﻃﻨﻲ‬
‫‪59228‬‬ ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻯ‪:‬‬ ‫ﺷﺮﻛﺔ‬ ‫ﻧﻮﻉ ﺍﻟﻤﻨﺸﺄﺓ ﺍﻟﺘﺠﺎﺭﻳﺔ‪:‬‬
‫ﻭﻳﻠﺘﺰ ﺗﺮﺍﻳﺪﻳﻨﻎ ﺍﻧﺪ ﻛﻮﻧﺘﺮﺍﻛﺘﻴﻨﻎ ﻣﺮﻫﻮﻥ‬ ‫ﺍﻟﺴﻤﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ‪:‬‬
‫ﻟﺼﺎﻟﺢ ﺑﻨﻚ ﻗﻄﺮ ﺍﻟﻮﻃﻨﻲ‬

‫ﺑﻴﺎﻧﺎﺕ ﺍﻟﻤﺪﻳﺮ ﺍﻟﻤﺴﺆﻭﻝ ‪:‬‬

‫ﺍﻧﺘﻮﻧﻰ ﺑﻮﺑﻦ‬ ‫ﺍﺳﻢ ﺍﻟﻤﺪﻳﺮ ﺍﻟﻤﺴﺌﻮﻝ‪:‬‬
‫ﺍﻟﻬﻨﺪ‬ ‫ﺟﻨﺴﻴﺔ ﺍﻟﻤﺪﻳﺮ ﺍﻟﻤﺴﺌﻮﻝ‪:‬‬ ‫‪27635617981‬‬ ‫ﺭﻗﻢ ﺍﻹﺛﺒﺎﺕ‪:‬‬
‫ﻧﻤﻮﺫﺝ ﺧﺘﻢ ﺍﻟﻤﻨﺸﺄﺓ ﺍﻟﺘﺠﺎﺭﻳﺔ ‪:‬‬ ‫ﺑﻴﺎﻧﺎﺕ ﺍﻟﻤﻮﻗﻊ ‪:‬‬
‫‪44‬‬ ‫ﻋﻘﺎﺭ ﺭﻗﻢ‪:‬‬ ‫ﺗﺠﺎﺭﻱ‬ ‫ﺗﺼﻨﻴﻒ ﺍﻟﻤﻮﻗﻊ‪:‬‬
‫‪1‬‬ ‫ﺭﻗﻢ ﺍﻟﺪﻭﺭ‪ /‬ﺍﻟﻮﺣﺪﺓ‪:‬‬ ‫ﻣﻜﺘﺐ ﺗﺠﺎﺭﻱ‬ ‫ﻧﻮﻉ ﺍﻟﻤﻮﻗﻊ‪:‬‬
‫ﺷﺮﻛﻪ ﻋﻴﻦ ﺧﺎﻟﺪ‬
‫ﻟﻼﺳﺘﺜﻤﺎﺭ ﺍﻟﻌﻘﺎﺭﻱ‬
‫ﺍﺳﻢ ﻣﺎﻟﻚ ﺍﻟﻌﻘﺎﺭ ‪:‬‬ ‫‪ 56‬ﻋﻴﻦ ﺧﺎﻟﺪ‬ ‫ﺍﻟﻤﻨﻄﻘﺔ‪:‬‬
‫ﻧﻮﻉ ﺍﻟﺮﺧﺼﺔ ‪:‬‬ ‫ﻋﻴﻦ ﺧﺎﻟﺪ‬ ‫ﺍﻟﺸﺎﺭﻉ‪:‬‬
‫ﺑﻠﺪﻳﺔ ﺍﻟﺮﻳﺎﻥ ‪/‬ﻋﻴﻦ ﺧﺎﻟﺪ‬ ‫ﻭﺻﻒ ﺍﻟﻌﻨﻮﺍﻥ ‪:‬‬ ‫‪205‬‬ ‫ﺭﻗﻢ ﺍﻟﺸﺎﺭﻉ ‪:‬‬
‫ﺍﻷﻧﺸﻄﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ ‪:‬‬

‫ﺇﺳﻢ ﺍﻟﻨﺸﺎﻁ‬ ‫ﺭﻗﻢ ﺍﻟﻨﺸﺎﻁ‬ ‫ﺇﺳﻢ ﺍﻟﻨﺸﺎﻁ‬ ‫ﺭﻗﻢ ﺍﻟﻨﺸﺎﻁ‬

‫ﺍﺳﺘﻴﺮﺍﺩ ﻣﻮﺍﺩ ﻛﻴﻤﺎﻭﻳﺔ ﻻﻋﻤﺎﻝ ﺍﻟﺒﻨﺎﺀ‬ ‫‪4669020‬‬ ‫ﺍﻟﺘﺠﺎﺭﺓ ﻓﻲ ﺍﺩﻭﺍﺕ ﻭ ﺍﺟﻬﺰﺓ ﺍﻻﺿﺎﺋﺔ‬ ‫‪4759001‬‬
‫ﺍﻟﺘﺠﺎﺭﻩ ﻓﻰ ﺍﻟﻤﻮﺍﺩ ﺍﻟﻼﺻﻘﻪ‬ ‫‪4752907‬‬ ‫ﺍﻟﺘﺠﺎﺭﺓ ﻓﻲ ﺍﻟﺰﻳﻮﺕ ﻭﺍﻟﺘﺸﺤﻴﻢ‬ ‫‪4730201‬‬
‫ﻣﻘﺎﻭﻻﺕ ﻛﻬﺮﺑﺎﺋﻴﺔ ﻭﺻﺤﻴﺔ‬ ‫‪4251101‬‬ ‫ﺍﻧﺸﺎﺀﺍﺕ ﻋﺎﻣﻪ )ﻣﻘﺎﻭﻻﺕ ﻋﺎﻣﻪ(‬ ‫‪452000‬‬
‫ﺍﻟﺘﺠﺎﺭﺓ ﻓﻲ ﻣﻮﺍﺩ ﺍﻟﺒﻨﺎﺀ‬ ‫‪4752801‬‬ ‫ﺍﻋﻤﺎﻝ ﺻﻴﺎﻧﻪ ﺍﻟﻤﺒﺎﻧﻰ‬ ‫‪8110031‬‬
‫ﺍﻟﺘﺠﺎﺭﻩ ﻓﻰ ﺍﻻﺩﻭﺍﺕ ﻭﺍﻟﻌﺪﺩ‬ ‫‪543000‬‬ ‫ﺍﻟﺘﺠﺎﺭﻩ ﻓﻰ ﺍﻻﺻﺒﺎﻍ ﻭﺍﻟﺪﻫﺎﻧﺎﺕ‬ ‫‪537400‬‬
‫ﺍﻟﺘﺠﺎﺭﺓ ﻓﻲ ﺍﻻﺩﻭﺍﺕ ﺍﻟﺼﺤﻴﺔ‬ ‫‪4752401‬‬ ‫ﺍﻟﺘﺠﺎﺭﺓ ﻓﻲ ﺍﻻﺩﻭﺍﺕ ﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔ‬ ‫‪4752501‬‬
‫ﺍﻟﺘﺠﺎﺭﻩ ﻓﻰ ﻣﻼﺑﺲ ﺍﻻﻣﻦ ﻭﺍﻟﺴﻼﻣﻪ‬ ‫‪4641567‬‬ ‫ﺍﻟﺘﺠﺎﺭﻩ ﻓﻰ ﻣﻌﺪﺍﺕ ﺍﻻﻣﻦ ﻭ ﺍﻟﺴﻼﻣﻪ‬ ‫‪544700‬‬

‫ﻣﺪﻳﺮ ﺇﺩﺍﺭﺓ ﺍﻟﺘﺴﺠﻴﻞ ﻭﺍﻟﺘﺮﺍﺧﻴﺺ ﺍﻟﺘﺠﺎﺭﻳﺔ‬

22/07/2020

TAX CARD - ‫ﺑﻄﺎﻗﺔ ﺿﺮﻳﺒﻴﺔ‬

The General Tax Authority of Qatar certifies that the ‫ﺗﺸﻬﺪ اﻟﻬﻴﺌﺔ اﻟﻌﺎﻣﺔ ﻟﻠﻀﺮاﺋﺐ ﻓﻲ دوﻟﺔ ﻗﻄﺮ أن‬
entity is registered as per the following details: :‫اﻟﺠﻬﺔ أدﻧﺎه ﻣﺴﺠﻠﺔ ﺣﺴﺐ اﻟﺒﻴﺎﻧﺎت اﻟﺘﺎﻟﻴﺔ‬

TIN Number 5000094235 ‫رﻗﻢ اﻟﺘﻌﺮﻳﻒ اﻟﻀﺮﻳﺒﻲ‬

‫وﻳﻠﺘﺰ ﺗﺮاﻳﺪﻳﻨﻎ اﻧﺪ ﻛﻮﻧﺘﺮاﻛﺘﻴﻨﻎ‬ :‫إﺳﻢ اﻟﻤﻜﻠﻒ‬

Taxpayer Name:
Wiltz Trading and Contracting
Commercial ‫رﻗﻢ اﻟﺴﺠﻞ اﻟﺘﺠﺎري اﻟﻘﻄﺮي‬
59228
Registration Number
Address Zone: 56 :‫ ﻣﻨﻄﻘﺔ‬Building: 2 :‫اﻟﻤﺒﻨﻰ‬ ‫اﻟﻌﻨﻮان‬

[Headquarter]: Street: ‫ ﻋﻴﻦ ﺧﺎﻟﺪ‬:‫ﺷﺎرع‬ :(‫)اﻟﻤﺮﻛﺰ اﻟﺮﺋﻴﺴﻲ‬

Qatar - ‫ﻗﻄﺮ‬
:‫اﻟﻨﺸﺎط اﻟﺮﺋﻴﺴﻲ‬
Main Activity: 4251101 - ‫ﻣﻘﺎوﻻت ﻛﻬﺮﺑﺎﺋﻴﺔ وﺻﺤﻴﺔ‬
4251101-Electrical and sanitary contracts

:‫اﻟﺸﻜﻞ اﻟﻘﺎﻧﻮﻧﻲ‬
Legal Form: ‫ﺷﺮﻛﺔ ذات ﻣﺴﺆوﻟﻴﺔ ﻣﺤﺪودة‬
Limited Liability Company
Activity Commencement :‫ﺗﺎرﻳﺦ ﺑﺪئ اﻟﻨﺸﺎط‬
19/03/2015
Date:
Number of Branches: 0 :‫ﻋﺪد اﻟﻔﺮوع‬

Registered taxes : : ‫اﻟﻀﺮاﺋﺐ اﻟﻤﺴﺠﻠﺔ‬

Income Tax REGISTERED - 19/03/2015 - ‫ﻣﺴﺠﻞ‬ ‫اﻟﻀﺮﻳﺒﺔ ﻋﻠﻰ اﻟﺪﺧﻞ‬

‫ﻫﺬه اﻟﻮﺛﻴﻘﺔ ﻣﺴﺘﺨﺮﺟﺔ ﻣﻦ اﻟﻨﻈﺎم اﻵﻟﻲ و ﻟﻴﺲ ﻣﻦ اﻟﻀﺮوري اﻟﺘﻮﻗﻴﻊ ﻋﻠﻴﻬﺎ‬

This is a system generated document and does not require to be signed.

9 - VALID ISO CERTIFICATES
 Certificate of Compliance
This is to Certify that the Environmental Management System of

TEMBO GLOBAL INDUSTRIES LIMITED

PLOT NO. PAP D-146-147, TURBHE MIDC, TTC INDUSTRIAL ESTATE, OPP. BALMER LAWRIE VAN LEER
CO., TURBHE, NAVI MUMBAI-400709, MAHARASHTRA (INDIA)
APL HOUSE B-1, BADRINATH, GROUND FLOOR, TUNGARESHWAR INDUSTRIAL COMPLEX, SR.NO-1,
SURVEY NO-62, NEAR SHIV MANDIR, SATIVALI VILLAGE, VASAI (EAST), 401208, MAHARASHTRA (INDIA)
UNIT NO.1/B BADRINATH, GROUND FLOOR, TUNGARESHWAR INDUSTRIAL COMPLEX, SR.NO-1,
SURVEY NO-62, NEAR SHIV MANDIR, SATIVALI VILLAGE, VASAI (EAST), 401208, MAHARASHTRA (INDIA)

has been assessed by ACAS and found to be in compliance with the

following Environmental Management Standard:

ISO 14001:2015
For the scope of
MANUFACTURING & SUPPLY OF PIPE HANGERS AND SUPPORT SYSTEMS, ANTI
VIBRATION PRODUCTS, RUBBER SUPPORT INSERTS, S.S FLOOR DRAINS,
THREADED RODS & SLOTTED CHANNEL.

Certificate No. GACB5691

Date of Initial Registration 01st Nov. 2019 Issue Date 01st Nov. 2019

1st Surveillance on or before 01st Nov. 2020 Expiry Date 31st Oct. 2022

2nd Surveillance on or before 01st Nov. 2021

This Certificate is Valid for 3 years & will remain current subject to the company maintaining its system to the required standards(s). This will be monitored
regularlybyAccredium Certifications. The certification details & effectiveness are listed at www.acascert.com. The registration does not assure the quality of
products produced by a quality system. This certificate is granted based on the limited sampling audit as per relevant ISO standard & Accredium
Certifications is not responsible for client’s failure to maintain documented quality systems.
10 - COPY OF VALID CERTIFICATE
 ‫‪2022-05-19‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻟﻄﺒﺎﻋﺔ ‪:‬‬ ‫ﻭﺯﺍﺭﺓ ﺍﻟﺪﺍﺧﻠﻴــــﺔ‬
‫‪AM 7:07‬‬ ‫ﻭﻗـﺖ ﺍﻟﻄﺒﺎﻋﺔ ‪:‬‬ ‫ﺍﻻﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺓ ﻟﻟﺩﻓﺎﻉ ﺍﻟﻣﺩﻧﻲ‬
‫‪PAC22005259‬‬ ‫ﺭﻗــﻢ ﺍﻟﻄﻠـﺐ ‪:‬‬ ‫ﺍﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ‬

‫ﺷﻬــــــﺎﺩﺓ ﻋﺪﻡ ﻣﻤﺎﻧﻌﺔ‬

‫‪ :‬ﺍﻋﺘﻤﺎﺩ ﻣﻨﺘﺞ‬ ‫ﻧﻮﻉ ﺍﻟﺸﻬﺎﺩﺓ‬

‫ﺑﻴﺎﻧﺎﺕ ﺍﻟﻤﻨﺸﺄﺓ‬

‫‪ :‬ﻭﻳﻠﺘﺰ ﺗﺮﺍﻳﺪﻳﻨﻎ ﺍﻧﺪ ﻛﻮﻧﺘﺮﺍﻛﺘﻴﻨﻎ‬ ‫ﺍﻹﺳﻢ ﺍﻟﺘﺠﺎﺭﻱ‬

‫‪91209 :‬‬ ‫ﺭﻗﻢ ﺍﻟﺮﺧﺼﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ‬ ‫‪59228 :‬‬ ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
‫‪:‬‬ ‫ﺭﻗﻢ ﺍﻟﻬﺎﺗﻒ‬ ‫‪14-1870-00 :‬‬ ‫ﺭﻗﻢ ﻗﻴﺪ ﺍﻟﻤﻨﺸﺄﺓ‬
‫‪:‬‬ ‫ﺍﻟﺒﺮﻳﺪ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ‬
‫‪Fire Fighting Systems :‬‬ ‫ﺍﻟﺘﺼﻨﻴﻒ‬
‫‪Pipe Hangers and Accessories :‬‬ ‫ﺇﺳﻢ ﺍﻟﻤﻨﺘﺞ‬

‫ﺗﻔﺎﺻﻴﻞ ﺍﻟﺸﻬﺎﺩﺓ‬

‫ﺗﻢ ﻣﺮﺍﺟﻌﺔ ﺍﻟﻄﻠﺐ ﺍﻟﻤﻘﺪﻡ ﻭﺍﺗﻀﺢ ﺑﺄﻧﻪ ﻻ ﻣﺎﻧﻊ ﻣﻦ ﺍﻋﺘﻤﺎﺩ ﺍﻟﻤﻨﺘﺞ ‪/‬ﺍﻟﻤﻨﺘﺠﺎﺕ ﺍﻟﻤﻮﺿﺤﻪ ﻓﻰ ﺍﻟﺘﻘﺮﻳﺮ ﺍﻟﻔﻨﻰ ﺍﻟﻤﺮﻓﻖ ﺑﻨﺎﺀ ﻋﻠﻰ ﺍﻋﺘﻤﺎﺩﻩ ﻣﻦ ﻗﺒﻞ ﺍﻟﻬﻴﺌﻪ‬
‫ﺍﻟﻤﺨﺘﺒﺮﻳﺔ ﺍﻟﻤﻮﺿﺤﻪ ﻓﻰ ﺍﻟﺘﻘﺮﺭ ﺍﻟﻔﻨﻲ ﺍﻟﻤﺮﻓﻖ‪.‬‬

‫ﻣﻼﺣﻈﺎﺕ‬

‫‪ .1‬ﻳﺠﺐ ﻋﻠﻰ ﺍﻟﺸﺮﻛﻪ ﺍﻻﻟﺘﺰﺍﻡ ﻭﺍﻟﻌﻤﻞ ﺑﻤﺎ ﺟﺎﺀ ﻓﻲ ﺍﺷﺘﺮﺍﻃﺎﺕ ﻗﺴﻢ ﺃﻧﻈﻤﺔ ﺍﻟﺴﻼﻣﻪ ﺍﻟﺘﻲ ﺗﻢ ﺍﻻﻃﻼﻉ ﻭﺍﻟﻤﻮﺍﻓﻘﺔ ﻋﻠﻴﻬﺎ ﻣﻦ ﺧﻼﻝ ﺍﻟﻤﻮﻗﻊ‪.‬‬
‫‪ .2‬ﻳﺠﺐ ﺍﻥ ﻳﻘﻮﻡ ﺑﺘﺮﻛﻴﺐ ﻫﺬﺍ ﺍﻟﻤﻨﺘﺞ ﻣﻦ ﻗﺒﻞ ﻣﻬﻨﺪﺳﻴﻦ ﻭﻓﻨﻴﻴﻦ ﻣﻌﺘﻤﺪﻳﻦ ﻣﻦ ﺍﻹﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺪﻓﺎﻉ ﺍﻟﻤﺪﻧﻲ‪.‬‬
‫‪ .3‬ﻳﺠﺐ ﺍﻥ ﻳﺤﻤﻞ ﺍﻟﻤﻨﺘﺞ ﺍﻟﻌﻼﻣﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ ﻟﻠﻬﻴﺌﻪ ﺍﻟﻤﺨﺘﺒﺮﻳﺔ ﺍﻟﻤﻌﺘﻤﺪﺓ ﻭﺍﻟﻤﻮﺿﺤﻪ ﻓﻲ ﺍﻟﺘﻘﺮﻳﺮ ﺍﻟﻔﻨﻲ ﺍﻟﻤﺮﻓﻖ ‪.‬‬

‫‪2024-05-17‬‬ ‫‪:‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻹﻧﺘﻬﺎﺀ‬ ‫‪2022-05-18‬‬ ‫‪:‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻻﻋﺘﻤﺎﺩ‬

‫ﻉ‪/‬‬

‫ﻣﺪﻳﺮ ﺍﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ‬

‫ﺍﻻﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺓ ﻟﻟﺩﻓﺎﻉ ﺍﻟﻣﺩﻧﻲ‬

‫‪Page 1 of 2‬‬
 ‫ﻭﺯﺍﺭﺓ ﺍﻟﺪﺍﺧﻠﻴﺔ‬
DATE : 2022-05-19 : ‫ﺍﻟﺘﺎﺭﻳـــــــﺦ‬
‫ﺍﻹﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺪﻓﺎﻉ ﺍﻟﻤﺪﻧﻲ‬
PERMIT # PAC22005259 : ‫ﺭﻗﻢ ﺍﻟﻄﻠﺐ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ‬

TECHNICAL REPORT ‫ﺍﻟﺘﻘﺮﻳﺮ ﺍﻟﻔﻨﻲ‬

PRODUCT Pipe Hangers and Accessories ‫ﻣﻨﺘﺞ‬
PRODUCT APPLICATION Fire Fighting Systems ‫ﺗﺼﻨﻴﻒ ﺍﻟﻤﻌﺪﺓ‬
APPLICANT / P.O BOX ‫ﻭﻳﻠﺘﺰ ﺗﺮﺍﻳﺪﻳﻨﻎ ﺍﻧﺪ ﻛﻮﻧﺘﺮﺍﻛﺘﻴﻨﻎ‬ ‫ﻣﻘﺪﻡ ﺍﻟﻄﻠﺐ‬
MANUFACTURER / LOCATION TEMBO GLOBAL INDUSTRIES LTD. / INDIA ‫ ﺑﻠﺪ ﺍﻟﺼﻨﻊ‬/ ‫ﺍﻟﺸﺮﻛﺔ ﺍﻟﻤﺼﻨﻌﺔ‬
‫ﺍﻟﻮﺻﻒ‬ ‫ﺍﻟﻤﻮﺩﻳﻞ‬
Pipe Hangers, U-bolt, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8 inch NPS, U and C orientation,
SE-UB
10, 12 inch NPS, U orientation only.
3RD PARTY CERTIFICATE /
Underwriters Laboratories ‫ﺷﻬﺎﺩﺓ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ ﺍﻟﻤﺴﺎﻧﺪﺓ‬
APPROVAL VFXT.EX16250
(UL) ( ‫)ﻣﻦ ﻫﻴﺌﺎﺕ ﻣﻌﺘﻤﺪﺓ‬

RECOMMENDATIONS ‫ﺍﻟﺘﻮﺻﻴﺎﺕ‬
Intended for supporting piping in sprinkler systems, water-spray systems and other piping systems used for fire-protection
service.

INVESTIGATED TO STANDARD UL 203.

TRADEMARK AND/OR TRADENAME: "SAKETH AMERICAN LEADER" , "UNiClamp".

This product approval shall comply with the Design, Inspection, Installation, Testing and Maintenance requirements of
NFPA 13/15 (and/or other related NFPA Codes / Standards), other acceptable International Codes / Standards, Local
Regulations and/or Manufacturer's Published Instructions subject to the technical review and approval of the Authority
Having Jurisdiction (Qatar Civil Defense).

/‫ﻉ‬

‫ﻣﺪﻳﺮ ﺍﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ‬

‫ﺍﻻﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺓ ﻟﻟﺩﻓﺎﻉ ﺍﻟﻣﺩﻧﻲ‬

Page 2 of 2
 ‫‪2022-05-19‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻟﻄﺒﺎﻋﺔ ‪:‬‬ ‫ﻭﺯﺍﺭﺓ ﺍﻟﺪﺍﺧﻠﻴــــﺔ‬
‫‪AM 7:07‬‬ ‫ﻭﻗـﺖ ﺍﻟﻄﺒﺎﻋﺔ ‪:‬‬ ‫ﺍﻻﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺓ ﻟﻟﺩﻓﺎﻉ ﺍﻟﻣﺩﻧﻲ‬
‫‪PAC22005258‬‬ ‫ﺭﻗــﻢ ﺍﻟﻄﻠـﺐ ‪:‬‬ ‫ﺍﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ‬

‫ﺷﻬــــــﺎﺩﺓ ﻋﺪﻡ ﻣﻤﺎﻧﻌﺔ‬

‫‪ :‬ﺍﻋﺘﻤﺎﺩ ﻣﻨﺘﺞ‬ ‫ﻧﻮﻉ ﺍﻟﺸﻬﺎﺩﺓ‬

‫ﺑﻴﺎﻧﺎﺕ ﺍﻟﻤﻨﺸﺄﺓ‬

‫‪ :‬ﻭﻳﻠﺘﺰ ﺗﺮﺍﻳﺪﻳﻨﻎ ﺍﻧﺪ ﻛﻮﻧﺘﺮﺍﻛﺘﻴﻨﻎ‬ ‫ﺍﻹﺳﻢ ﺍﻟﺘﺠﺎﺭﻱ‬

‫‪91209 :‬‬ ‫ﺭﻗﻢ ﺍﻟﺮﺧﺼﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ‬ ‫‪59228 :‬‬ ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
‫‪:‬‬ ‫ﺭﻗﻢ ﺍﻟﻬﺎﺗﻒ‬ ‫‪14-1870-00 :‬‬ ‫ﺭﻗﻢ ﻗﻴﺪ ﺍﻟﻤﻨﺸﺄﺓ‬
‫‪:‬‬ ‫ﺍﻟﺒﺮﻳﺪ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ‬
‫‪Fire Fighting Systems :‬‬ ‫ﺍﻟﺘﺼﻨﻴﻒ‬
‫‪Pipe Hangers and Accessories :‬‬ ‫ﺇﺳﻢ ﺍﻟﻤﻨﺘﺞ‬

‫ﺗﻔﺎﺻﻴﻞ ﺍﻟﺸﻬﺎﺩﺓ‬

‫ﺗﻢ ﻣﺮﺍﺟﻌﺔ ﺍﻟﻄﻠﺐ ﺍﻟﻤﻘﺪﻡ ﻭﺍﺗﻀﺢ ﺑﺄﻧﻪ ﻻ ﻣﺎﻧﻊ ﻣﻦ ﺍﻋﺘﻤﺎﺩ ﺍﻟﻤﻨﺘﺞ ‪/‬ﺍﻟﻤﻨﺘﺠﺎﺕ ﺍﻟﻤﻮﺿﺤﻪ ﻓﻰ ﺍﻟﺘﻘﺮﻳﺮ ﺍﻟﻔﻨﻰ ﺍﻟﻤﺮﻓﻖ ﺑﻨﺎﺀ ﻋﻠﻰ ﺍﻋﺘﻤﺎﺩﻩ ﻣﻦ ﻗﺒﻞ ﺍﻟﻬﻴﺌﻪ‬
‫ﺍﻟﻤﺨﺘﺒﺮﻳﺔ ﺍﻟﻤﻮﺿﺤﻪ ﻓﻰ ﺍﻟﺘﻘﺮﺭ ﺍﻟﻔﻨﻲ ﺍﻟﻤﺮﻓﻖ‪.‬‬

‫ﻣﻼﺣﻈﺎﺕ‬

‫‪ .1‬ﻳﺠﺐ ﻋﻠﻰ ﺍﻟﺸﺮﻛﻪ ﺍﻻﻟﺘﺰﺍﻡ ﻭﺍﻟﻌﻤﻞ ﺑﻤﺎ ﺟﺎﺀ ﻓﻲ ﺍﺷﺘﺮﺍﻃﺎﺕ ﻗﺴﻢ ﺃﻧﻈﻤﺔ ﺍﻟﺴﻼﻣﻪ ﺍﻟﺘﻲ ﺗﻢ ﺍﻻﻃﻼﻉ ﻭﺍﻟﻤﻮﺍﻓﻘﺔ ﻋﻠﻴﻬﺎ ﻣﻦ ﺧﻼﻝ ﺍﻟﻤﻮﻗﻊ‪.‬‬
‫‪ .2‬ﻳﺠﺐ ﺍﻥ ﻳﻘﻮﻡ ﺑﺘﺮﻛﻴﺐ ﻫﺬﺍ ﺍﻟﻤﻨﺘﺞ ﻣﻦ ﻗﺒﻞ ﻣﻬﻨﺪﺳﻴﻦ ﻭﻓﻨﻴﻴﻦ ﻣﻌﺘﻤﺪﻳﻦ ﻣﻦ ﺍﻹﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺪﻓﺎﻉ ﺍﻟﻤﺪﻧﻲ‪.‬‬
‫‪ .3‬ﻳﺠﺐ ﺍﻥ ﻳﺤﻤﻞ ﺍﻟﻤﻨﺘﺞ ﺍﻟﻌﻼﻣﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ ﻟﻠﻬﻴﺌﻪ ﺍﻟﻤﺨﺘﺒﺮﻳﺔ ﺍﻟﻤﻌﺘﻤﺪﺓ ﻭﺍﻟﻤﻮﺿﺤﻪ ﻓﻲ ﺍﻟﺘﻘﺮﻳﺮ ﺍﻟﻔﻨﻲ ﺍﻟﻤﺮﻓﻖ ‪.‬‬

‫‪2024-05-17‬‬ ‫‪:‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻹﻧﺘﻬﺎﺀ‬ ‫‪2022-05-18‬‬ ‫‪:‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻻﻋﺘﻤﺎﺩ‬

‫ﻉ‪/‬‬

‫ﻣﺪﻳﺮ ﺍﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ‬

‫ﺍﻻﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺓ ﻟﻟﺩﻓﺎﻉ ﺍﻟﻣﺩﻧﻲ‬

‫‪Page 1 of 2‬‬
 ‫ﻭﺯﺍﺭﺓ ﺍﻟﺪﺍﺧﻠﻴﺔ‬
DATE : 2022-05-19 : ‫ﺍﻟﺘﺎﺭﻳـــــــﺦ‬
‫ﺍﻹﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺪﻓﺎﻉ ﺍﻟﻤﺪﻧﻲ‬
PERMIT # PAC22005258 : ‫ﺭﻗﻢ ﺍﻟﻄﻠﺐ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ‬

TECHNICAL REPORT ‫ﺍﻟﺘﻘﺮﻳﺮ ﺍﻟﻔﻨﻲ‬

PRODUCT Pipe Hangers and Accessories ‫ﻣﻨﺘﺞ‬
PRODUCT APPLICATION Fire Fighting Systems ‫ﺗﺼﻨﻴﻒ ﺍﻟﻤﻌﺪﺓ‬
APPLICANT / P.O BOX ‫ﻭﻳﻠﺘﺰ ﺗﺮﺍﻳﺪﻳﻨﻎ ﺍﻧﺪ ﻛﻮﻧﺘﺮﺍﻛﺘﻴﻨﻎ‬ ‫ﻣﻘﺪﻡ ﺍﻟﻄﻠﺐ‬
MANUFACTURER / LOCATION TEMBO GLOBAL INDUSTRIES LTD. / INDIA ‫ ﺑﻠﺪ ﺍﻟﺼﻨﻊ‬/ ‫ﺍﻟﺸﺮﻛﺔ ﺍﻟﻤﺼﻨﻌﺔ‬
‫ﺍﻟﻮﺻﻒ‬ ‫ﺍﻟﻤﻮﺩﻳﻞ‬
Pipe Hangers, Clevis Hanger.
Rod size M10mm, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 inch NPS.
SCH
Rod size M12mm, 2-1/2, 3, 4 inch NPS.
Rod size M16mm, 5, 6, 8 inch NPS.
3RD PARTY CERTIFICATE /
Underwriters Laboratories ‫ﺷﻬﺎﺩﺓ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ ﺍﻟﻤﺴﺎﻧﺪﺓ‬
APPROVAL VFXT.EX16250
(UL) ( ‫)ﻣﻦ ﻫﻴﺌﺎﺕ ﻣﻌﺘﻤﺪﺓ‬

RECOMMENDATIONS ‫ﺍﻟﺘﻮﺻﻴﺎﺕ‬
Intended for supporting piping in sprinkler systems, water-spray systems and other piping systems used for fire-protection
service.

INVESTIGATED TO STANDARD UL 203.

TRADEMARK AND/OR TRADENAME: "SAKETH AMERICAN LEADER" , "UNiClamp".

This product approval shall comply with the Design, Inspection, Installation, Testing and Maintenance requirements of
NFPA 13/15 (and/or other related NFPA Codes / Standards), other acceptable International Codes / Standards, Local
Regulations and/or Manufacturer's Published Instructions subject to the technical review and approval of the Authority
Having Jurisdiction (Qatar Civil Defense).

/‫ﻉ‬

‫ﻣﺪﻳﺮ ﺍﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ‬

‫ﺍﻻﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺓ ﻟﻟﺩﻓﺎﻉ ﺍﻟﻣﺩﻧﻲ‬

Page 2 of 2
 ‫‪2022-05-19‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻟﻄﺒﺎﻋﺔ ‪:‬‬ ‫ﻭﺯﺍﺭﺓ ﺍﻟﺪﺍﺧﻠﻴــــﺔ‬
‫‪AM 7:06‬‬ ‫ﻭﻗـﺖ ﺍﻟﻄﺒﺎﻋﺔ ‪:‬‬ ‫ﺍﻻﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺓ ﻟﻟﺩﻓﺎﻉ ﺍﻟﻣﺩﻧﻲ‬
‫‪PAC22005257‬‬ ‫ﺭﻗــﻢ ﺍﻟﻄﻠـﺐ ‪:‬‬ ‫ﺍﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ‬

‫ﺷﻬــــــﺎﺩﺓ ﻋﺪﻡ ﻣﻤﺎﻧﻌﺔ‬

‫‪ :‬ﺍﻋﺘﻤﺎﺩ ﻣﻨﺘﺞ‬ ‫ﻧﻮﻉ ﺍﻟﺸﻬﺎﺩﺓ‬

‫ﺑﻴﺎﻧﺎﺕ ﺍﻟﻤﻨﺸﺄﺓ‬

‫‪ :‬ﻭﻳﻠﺘﺰ ﺗﺮﺍﻳﺪﻳﻨﻎ ﺍﻧﺪ ﻛﻮﻧﺘﺮﺍﻛﺘﻴﻨﻎ‬ ‫ﺍﻹﺳﻢ ﺍﻟﺘﺠﺎﺭﻱ‬

‫‪91209 :‬‬ ‫ﺭﻗﻢ ﺍﻟﺮﺧﺼﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ‬ ‫‪59228 :‬‬ ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
‫‪:‬‬ ‫ﺭﻗﻢ ﺍﻟﻬﺎﺗﻒ‬ ‫‪14-1870-00 :‬‬ ‫ﺭﻗﻢ ﻗﻴﺪ ﺍﻟﻤﻨﺸﺄﺓ‬
‫‪:‬‬ ‫ﺍﻟﺒﺮﻳﺪ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ‬
‫‪Fire Fighting Systems :‬‬ ‫ﺍﻟﺘﺼﻨﻴﻒ‬
‫‪Pipe Hangers and Accessories :‬‬ ‫ﺇﺳﻢ ﺍﻟﻤﻨﺘﺞ‬

‫ﺗﻔﺎﺻﻴﻞ ﺍﻟﺸﻬﺎﺩﺓ‬

‫ﺗﻢ ﻣﺮﺍﺟﻌﺔ ﺍﻟﻄﻠﺐ ﺍﻟﻤﻘﺪﻡ ﻭﺍﺗﻀﺢ ﺑﺄﻧﻪ ﻻ ﻣﺎﻧﻊ ﻣﻦ ﺍﻋﺘﻤﺎﺩ ﺍﻟﻤﻨﺘﺞ ‪/‬ﺍﻟﻤﻨﺘﺠﺎﺕ ﺍﻟﻤﻮﺿﺤﻪ ﻓﻰ ﺍﻟﺘﻘﺮﻳﺮ ﺍﻟﻔﻨﻰ ﺍﻟﻤﺮﻓﻖ ﺑﻨﺎﺀ ﻋﻠﻰ ﺍﻋﺘﻤﺎﺩﻩ ﻣﻦ ﻗﺒﻞ ﺍﻟﻬﻴﺌﻪ‬
‫ﺍﻟﻤﺨﺘﺒﺮﻳﺔ ﺍﻟﻤﻮﺿﺤﻪ ﻓﻰ ﺍﻟﺘﻘﺮﺭ ﺍﻟﻔﻨﻲ ﺍﻟﻤﺮﻓﻖ‪.‬‬

‫ﻣﻼﺣﻈﺎﺕ‬

‫‪ .1‬ﻳﺠﺐ ﻋﻠﻰ ﺍﻟﺸﺮﻛﻪ ﺍﻻﻟﺘﺰﺍﻡ ﻭﺍﻟﻌﻤﻞ ﺑﻤﺎ ﺟﺎﺀ ﻓﻲ ﺍﺷﺘﺮﺍﻃﺎﺕ ﻗﺴﻢ ﺃﻧﻈﻤﺔ ﺍﻟﺴﻼﻣﻪ ﺍﻟﺘﻲ ﺗﻢ ﺍﻻﻃﻼﻉ ﻭﺍﻟﻤﻮﺍﻓﻘﺔ ﻋﻠﻴﻬﺎ ﻣﻦ ﺧﻼﻝ ﺍﻟﻤﻮﻗﻊ‪.‬‬
‫‪ .2‬ﻳﺠﺐ ﺍﻥ ﻳﻘﻮﻡ ﺑﺘﺮﻛﻴﺐ ﻫﺬﺍ ﺍﻟﻤﻨﺘﺞ ﻣﻦ ﻗﺒﻞ ﻣﻬﻨﺪﺳﻴﻦ ﻭﻓﻨﻴﻴﻦ ﻣﻌﺘﻤﺪﻳﻦ ﻣﻦ ﺍﻹﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺪﻓﺎﻉ ﺍﻟﻤﺪﻧﻲ‪.‬‬
‫‪ .3‬ﻳﺠﺐ ﺍﻥ ﻳﺤﻤﻞ ﺍﻟﻤﻨﺘﺞ ﺍﻟﻌﻼﻣﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ ﻟﻠﻬﻴﺌﻪ ﺍﻟﻤﺨﺘﺒﺮﻳﺔ ﺍﻟﻤﻌﺘﻤﺪﺓ ﻭﺍﻟﻤﻮﺿﺤﻪ ﻓﻲ ﺍﻟﺘﻘﺮﻳﺮ ﺍﻟﻔﻨﻲ ﺍﻟﻤﺮﻓﻖ ‪.‬‬

‫‪2024-05-17‬‬ ‫‪:‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻹﻧﺘﻬﺎﺀ‬ ‫‪2022-05-18‬‬ ‫‪:‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻻﻋﺘﻤﺎﺩ‬

‫ﻉ‪/‬‬

‫ﻣﺪﻳﺮ ﺍﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ‬

‫ﺍﻻﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺓ ﻟﻟﺩﻓﺎﻉ ﺍﻟﻣﺩﻧﻲ‬

‫‪Page 1 of 2‬‬
 ‫ﻭﺯﺍﺭﺓ ﺍﻟﺪﺍﺧﻠﻴﺔ‬
DATE : 2022-05-19 : ‫ﺍﻟﺘﺎﺭﻳـــــــﺦ‬
‫ﺍﻹﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺪﻓﺎﻉ ﺍﻟﻤﺪﻧﻲ‬
PERMIT # PAC22005257 : ‫ﺭﻗﻢ ﺍﻟﻄﻠﺐ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ‬

TECHNICAL REPORT ‫ﺍﻟﺘﻘﺮﻳﺮ ﺍﻟﻔﻨﻲ‬

PRODUCT Pipe Hangers and Accessories ‫ﻣﻨﺘﺞ‬
PRODUCT APPLICATION Fire Fighting Systems ‫ﺗﺼﻨﻴﻒ ﺍﻟﻤﻌﺪﺓ‬
APPLICANT / P.O BOX ‫ﻭﻳﻠﺘﺰ ﺗﺮﺍﻳﺪﻳﻨﻎ ﺍﻧﺪ ﻛﻮﻧﺘﺮﺍﻛﺘﻴﻨﻎ‬ ‫ﻣﻘﺪﻡ ﺍﻟﻄﻠﺐ‬
MANUFACTURER / LOCATION TEMBO GLOBAL INDUSTRIES LTD. / INDIA ‫ ﺑﻠﺪ ﺍﻟﺼﻨﻊ‬/ ‫ﺍﻟﺸﺮﻛﺔ ﺍﻟﻤﺼﻨﻌﺔ‬
‫ﺍﻟﻮﺻﻒ‬ ‫ﺍﻟﻤﻮﺩﻳﻞ‬
Pipe Hangers, Band Hanger, M10 rod size at 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 inch NPS,
SH
M12mm rod size at 6, 8 inch NPS.
3RD PARTY CERTIFICATE /
Underwriters Laboratories ‫ﺷﻬﺎﺩﺓ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ ﺍﻟﻤﺴﺎﻧﺪﺓ‬
APPROVAL VFXT.EX16250
(UL) ( ‫)ﻣﻦ ﻫﻴﺌﺎﺕ ﻣﻌﺘﻤﺪﺓ‬

RECOMMENDATIONS ‫ﺍﻟﺘﻮﺻﻴﺎﺕ‬
Intended for supporting piping in sprinkler systems, water-spray systems and other piping systems used for fire-protection
service.

INVESTIGATED TO STANDARD UL 203.

TRADEMARK AND/OR TRADENAME: "SAKETH AMERICAN LEADER" , "UNiClamp".

This product approval shall comply with the Design, Inspection, Installation, Testing and Maintenance requirements of
NFPA 13/15 (and/or other related NFPA Codes / Standards), other acceptable International Codes / Standards, Local
Regulations and/or Manufacturer's Published Instructions subject to the technical review and approval of the Authority
Having Jurisdiction (Qatar Civil Defense).

/‫ﻉ‬

‫ﻣﺪﻳﺮ ﺍﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ‬

‫ﺍﻻﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺓ ﻟﻟﺩﻓﺎﻉ ﺍﻟﻣﺩﻧﻲ‬

Page 2 of 2
 Certificate of Compliance
This certificate is issued for the following:

Pipe Hanger Components for Automatic Sprinkler Systems

Hanger Rod For
Product Component
Size, in. Nominal Pipe Remarks
Designation Description
(mm) Sizes, in.
RC 3/8 (10) Riser Clamp 3/4, 1, 1-1/4, 1-1/2, 2 -
RC ½ (12) Riser Clamp 2-1/2, 3, 4 -
RC 5/8 (16) Riser Clamp 6 -

Prepared for: Manufactured by:

Tembo Global Industries Ltd Tembo Global Industries Ltd

Plot No. 146/147 MIDC – Turbhe - Unit No. 1/B – Badrinath, Ground Floor,
TTC, Navi Mumbai, Tungareshwar Industrial Complex Sativali Village,
Maharashtra 400703 Vasai (East), Dist. Thane, Maharashtra 401208
India India

FM Approvals Class: 1951, 1952, 1953 Issue Date December 2016

Approval Identification: 3059204 Approval Granted: May 23, 2018
Superseded by: RR223825 Date Approved: June 15, 2020

To verify the availability of the Approved product, please refer to www.approvalguide.com

Said Approval is subject to satisfactory field performance, continuing Surveillance Audits, and strict conformity to the
constructions as shown in the Approval Guide, an online resource of FM Approvals.

David B. Fuller
VP, Manager of Fire Protection
FM Approvals
1151 Boston-Providence Turnpike
Norwood, MA 02062 USA
 Certificate of Compliance
This certificate is issued for the following:

Pipe Hanger Components for Automatic Sprinkler Systems

Product Hanger Rod Component For

Remarks
Designation Size, in (mm) Description Nominal Pipe Sizes, in.
USC 3/8 (10) U-Strap Hangers 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2 -
USC 1/2 (12) U-Strap Hangers 3, 3-1/2, 4, 5, 6 -

Prepared for: Manufactured by:

Tembo Global Industries Ltd Tembo Global Industries Ltd

Plot No. 146/147 MIDC – Turbhe - Unit No. 1/B – Badrinath, Ground Floor,
TTC, Navi Mumbai, Tungareshwar Industrial Complex
Maharashtra 400703, Sativali Village, Vasai (East), Dist.
India Thane, Maharashtra 401208,
India

FM Approvals Class: 1951, 1952, 1953 Issue Date December 2016

Approval Identification: 3059204 Approval Granted: May 23, 2018

Superseded by: RR223825 Date Approved: June 15, 2020

To verify the availability of the Approved product, please refer to www.approvalguide.com

Said Approval is subject to satisfactory field performance, continuing Surveillance Audits, and strict conformity to the
constructions as shown in the Approval Guide, an online resource of FM Approvals.

David B. Fuller
VP, Manager of Fire Protection
FM Approvals
1151 Boston-Providence Turnpike
Norwood, MA 02062 USA
 Certificate of Compliance
This certificate is issued for the following:

Pipe Hanger Components for Automatic Sprinkler Systems

Tembo Global, Pipe Clamps
Product Hanger Rod Component For Nominal Pipe
Remarks
Designation Size, in. (mm) Description Sizes, in.
3/8 3/4, 1, 1 ¼, 1 ½, 2,
NCR Pipe Hanger with Lining -
(10) 2 ½, 3, 4

Prepared for: Manufactured by:

Tembo Global Industries Ltd Tembo Global Industries Ltd

Plot No. 146/147 MIDC – Turbhe - Unit No. 1/B – Badrinath, Ground Floor,
TTC, Navi Mumbai, Tungareshwar Industrial Complex
Maharashtra 400703, Sativali Village, Vasai (East), Dist.
India Thane, Maharashtra 401208,
India

FM Approvals Class: 1951, 1952, 1953 Issue Date December 2016

Approval Identification: 3056409 Approval Granted: April 25, 2016

Superseded by: RR224763 Date Approved: September 2, 2020

To verify the availability of the Approved product, please refer to www.approvalguide.com

Said Approval is subject to satisfactory field performance, continuing Surveillance Audits, and strict conformity to the
constructions as shown in the Approval Guide, an online resource of FM Approvals.

David B. Fuller
VP, Manager of Fire Protection
FM Approvals
1151 Boston-Providence Turnpike
Norwood, MA 02062 USA
 Certificate of Compliance
This certificate is issued for the following:

Pipe Hanger Components for Automatic Sprinkler Systems

Product Hanger Rod Component For Nominal Pipe

Remarks
Designation Size, in. (mm) Description Sizes, in.
SH 3/8 (10) Loop Hanger 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 -
SH 1/2 (12) Loop Hanger 5, 6, 8 -

Prepared for: Manufactured by:

Tembo Global Industries Ltd Tembo Global Industries Ltd

Plot No. 146/147 MIDC – Turbhe - Unit No. 1/B – Badrinath, Ground Floor,
TTC, Navi Mumbai, Tungareshwar Industrial Complex Sativali Village,
Maharashtra 400703, Vasai (East), Dist. Thane, Maharashtra 401208
India India

FM Approvals Class: 1951, 1952, 1953 Issue Date December 2016

Approval Identification: 3056409 Approval Granted: April 25, 2016
Superseded by: RR223825 Date Approved: June 15, 2020

To verify the availability of the Approved product, please refer to www.approvalguide.com

Said Approval is subject to satisfactory field performance, continuing Surveillance Audits, and strict conformity to the
constructions as shown in the Approval Guide, an online resource of FM Approvals.

David B. Fuller
VP, Manager of Fire Protection
FM Approvals
1151 Boston-Providence Turnpike
Norwood, MA 02062 USA
 Certificate of Compliance
This certificate is issued for the following:

Pipe Hanger Components for Automatic Sprinkler Systems

Product Hanger Rod Component For Nominal Pipe

Remarks
Designation Size, in. (mm) Description Sizes, in.
CH 3/8 (10) Clevis Hanger 3/4, 1, 1-1/4, 1-1/2 -
CH 1/2 (12) Clevis Hanger 2-1/2, 3, 4 -
CH 5/8 (16) Clevis Hanger 5, 6, 8 -

Prepared for: Manufactured by:

Tembo Global Industries Ltd Tembo Global Industries Ltd

Plot No. 146/147 MIDC – Turbhe - Unit No. 1/B – Badrinath, Ground Floor,
TTC, Navi Mumbai, Tungareshwar Industrial Complex Sativali Village,
Maharashtra 400703, Vasai (East), Dist. Thane, Maharashtra 401208,
India India

FM Approvals Class: 1951, 1952, 1953 Issue Date December 2016

Approval Identification: 3056409 Approval Granted: April 25, 2016

Superseded by: RR223825 Date Approved: June 15, 2020

To verify the availability of the Approved product, please refer to www.approvalguide.com

Said Approval is subject to satisfactory field performance, continuing Surveillance Audits, and strict conformity to the
constructions as shown in the Approval Guide, an online resource of FM Approvals.

David B. Fuller
VP, Manager of Fire Protection
FM Approvals
1151 Boston-Providence Turnpike
Norwood, MA 02062 USA
11 - LIST OF PROJECTS
 PROJECTS REFERENCE LIST  

Sl.No. Name of the Project Contractor Consultant

1 GWC LOGISTIC PARK REDCO INTERNATIONAL QDC
2 PROJECT 401- INTEGRATED TRAINING CENTER FOR QAF JOINT SPECIAL FORCES CONTRACO W.L.L. QDC
3 SHEIKHA MOZZA VILLA GULF CENTER QDC
4 AL-THUMAMA STADIUM AL JABER ENGINEERING & TEKFEN AEB
4 BARWA COMMERCIAL LABOUR & FAMILY UCC DAR
5 LUSAIL PLAZA TOWER HYUNDAI - MIDMAC DAR
6 DESIGN & BUILD OF DOHA AIR BASE BUTEC,CONTRACO,BUILDERS CICO
7 BURJ DAMAC AL SAWARI BRIGHT LIGHT LACASA
8 BUS DEPOT REDCO INTERNATIONAL AECOM
9 QATEIFAN HOTEL PROJECT AL JABER ENGINEERING ATKINS
10 PANDA ENCLOSURE & TOURISITC VIEWING FACILITIES GET ARAB CONSULTING ENGINEERS
11 PPP DEVELOPMENT SCHOOLS - 8 SCHOOLS AL JABER ELECTRO MECHANICAL QPM - AEB
12 HIA - BAGGAGE EXPANSION PACKAGE AL JABER ENGINEERING W.L.L. HILL-DAR
13 BUS DEPOT BOJAMHOOR CEG INTERNATIONAL
14 FALCON - 05 TRAGGS ELECTRICAL BAHADIR MAULTORO
15 VENDOME MALL GULF CENTER MZP - AEB
16 COMMERCIAL BOULEVARD REDCO AL MANA DORSCH QATAR
MSAZI ENGINEERING / SINGAPORE
17 VENDOME MALL - NOVO CINEMAS MZP - AEB
ENGINEERING
18 WADI AL SAIL AL-AALI AEB
19 QDATA CENTER 1 RAS BUFONTAS QFZ BK GULF KHATIB ALAMI
20 QATAR ARMED FORCES ACCOMODATION & TRAINING CAMP HATCO BAHADIR MAULTORO
21 TRAINING FACILITY CENTER CONTRACO QATAR ARMED ARMED FORCES
22 CONSTRUCTION ,COMPLETION OF POLICE COLLEGE COMPLEX HASSANESCO CEG INTERNATIONAL
23 AL SADD HOTEL APARTMENT TEM-AC HOUSE ARHCITECTURE & INTERIORS
24 INFORMATION TECHNOLOGY BUILDING TEM-AC QMC
25 AL KAHRAEJ RESIDENTIAL TOWER AL BAKER GROUP AL BAKER INVESTMENTS
26 DUHAIL SPORTING STADIUM TAKYEEF CEG INTERNATIONAL
27 DESIGN OF SHOURA COUNCIL REDCO AL MANA GHD
28 DESIGN & BUILD OF PARTIAL REHABILITATION & RENOVATION GET UNITED CONSULTANTS
29 MALL OF QATAR DEVELOPMENT PACKAGE VALENCE - GBCT ERGA
30 AMIRI TERMINAL AL-ALI - BOJAMHOOR PRIVATE ENGINEERING OFFICE
31 DESIGN & BUILD OF NATIONAL ARCHIVE MUSHERIB BOJAMHOOR CEG INTERNATIONAL
32 COM-33 ANION AL FEREEF CONSULTANCY
33 ALFIA SCHOOLS VALENCE TRADING AL SADD CONSULTING
34 PSYCHIATRIC HOSPITAL REFURBISHMENT MAIN PACKAGE GULF CENTER ASTAD
35 CULTURAL CENTER PACKAGE - QATAR FOUNDATION VALENCE TRADING ASTAD
36 WADI AL SAIL OFFICE BUILDING WITH DATA CENTER AT C RING ROAD AL BALAGH AEB
37 GRAND ZONE AL-AALI KEO
38 HAMAD INTERNATIONAL AIPORT - HIAEP-0017 CCC- AL MALKI DAR
39 AL WAJBA PALACE UCC-RADIAT ASTAD
40 DESIGN & CONTRUCTION OF THREE PEDESTRIAN BRIDGES -PHASE 2 ASHGHAL CDM SMITH
41 ONSHORE LNG FACILITIES OF NORTH FIELD EAST PROJECT GULF CONTRACTING W.L.L. CTJV
JAMES CUBITT & PARTNERS
42 RESIDENTIAL TOWER FOR QATAR CHARITY AT MARINA COM 47 , LUSAIL AL BALAGH
ENGINEERING CONSULTANCY
43 CONSTRUCTION OF LINK ROADS ADJACENT TO AL KHOR EXPRESSWAY (P043) TEKFEN CONSTRUCTION CDM SMITH
44 DESIGN & CONSTRUCTION OF INDUSTRIAL & MUBAIREEK INTERCHANGES PROJECT MIDMAC-PORR CDM SMITH
45 FALCON - 05 BEDDOWN PROJECT QIP BAHADIR MAULTORO
46 HIA -EXPANSION CMTC UBT-JV
47 SHAMAL HEALTH CENTER AL JABER ELECTRO MECHANICAL ECG
48 GREEN LINE REDCO INTERNATIONAL HILL INTERNATIOONAL
49 SEEF LUSAIL DEVELOPMENT PROJECT PLOT D1,D2,D3,D4 AL MUNTASSAR HILL INTERNATIOONAL
ENERGOPROJEKT ENTL LTD - LARSEN &
50 DEISGN AND CONSTRUCTION OF PRIMARY ELECTRICAL POWER SUBSTATIONS AND ITS MANATEQ
TOURBO
MAIN FEED (HV CABLES) IN RAS BUFONTAS, UM ALHOUL AND AL WAKRA LOGISTIC CITY
51 SOUTH PLAZA BUILDING AT KATARA PROJECT KATARA PROJECTS KEO INTERNATIONAL
52 CONSTRUCTION & UPGRADING OF MESAIMEER ROAD (P008-C3) CCC PARSONS
53 RESIDENTIAL BUILDING (B+G+5) , 501 , 503 , 512 , 513- K120 K.B.R CONSEIL
54 CARGO BRIDGING FACILITY & AVI - PACKAGE HIAEP - 0063 CDC AECOM
55 RESIDENTIAL & COMMERCIAL TOWER (MARINA COM 33 ) SIGMA - ANION CONSEIL
56 CULTURAL CENTER IN EDUCATION CITY PROJECT VALENCE TRADING & CONTRACTING REDCO AL MANA
DOHA PORT RE DEVELOPMENT PROJECT - CONSTRUCTION OF GARDEN DISTRICT SUPREME COMMITTEE FOR
57
PACKAGE WORKS NAKHEEL LANDSCAPES DELIEVERY & LEGACY
58 QATAR ARMED FORCES - QECE UCC QATAR ARMIRI CORPS OF ENGINEERS
59 COMMERCIAL & OFFICES TOWER MARINA COM - 02 VALENCE TRADING & CONTRACTING EHAF
60 DEISGN AND BUILD OF KATARA ICONIC FLOATING MARINA - (PK5) ANION DAR- QPM
61 LUXURY MIXED USE DEVELOPMENT AT MARINA MIX 12F AL ALIA AEB
62 ACS DOHA INTERNATIONAL SCHOOL JABER TRADING & CONTRACTING CO W.L CEG INTERNATIONAL
63 DOHA PORT REDEVELOPMENT PROJECT - SPORTS MARINA & CONTAINER PARK WORKS JABER TRADING & CONTRACTING CO W.L ASTAD
12 - COPY OF PREVIOUS ASHGHAL APPROVAL
 Company Comments Review Summary

PROJECT ID NFE1 ORIGINATOR CODE CTC

Reference Rev. Rev. Date St. Class Discipline Doc Type
NFE1-CTC- B 2021-10-14 IFA 1 HV MAR
HV-MAR-00009

Review Details:
Previous Rev. Return Code:

Document received with Transmittal IN: NFE1-T-CTC-QG-01169

Receipt Date: 2021-10-14
The Document Review has been initiated on: 2021-10-14
Review Time Frame: 15 day(s)
Role Name Return Code Date of Comment
approver Jamal Kaddoura (11445) B-Approved/Reviewed 2021-10-17
with minor comments

If applicable as per Approver return code, comments are available either after this
page and/or as external attached comments below.
Number of annotation(s): 1

This page is automatically generated from PIMS and

shall be considered as official answer from COMPANY.
 TRANSMITTAL OF SHOP DRAWINGS, EQUIPMENT DATA CONTRACT NO. PAGE
MATERIAL SAMPLES, OR MANUFACTURER'S
W912ER20C0010 1 of 1
CERTIFICATES OF COMPLIANCE

PROJECT TITLE AI Udeid Air Base, Doha, Qatar DATE TRANSMITTAL NO.

LOCATION Falcon 5/F-15QA Beddown 08/22/2022 03 45 00-19

Item Description Variation QACode

60 Anchoring Accessories for precast concre No 8

SECTION Ill - GOVERNMENT REVIEW REMARKS
Review Code B- Approved with com ments (completed)

Comments:

1. Ensure materials at site shall be inspected by QAIAC prior to use for installation.
2. Ensure to use hot dip galvanized accessories other than stainless steel accessories .
3. Approval or acceptance by the Government for a submittal does not relieve the Contractor of the responsibility for meeting the contract
requirements or for any error that may exist.
4. Under the Quality Control requirements of this contract, the Contractor is responsible for ensuring that the information contained within
each submitta l accurately conforms with the requi rements of the contract documents.

BMJV
Falcon 51F-1 5QA Beddown Project
DISTHISUTION
DISTRIBUTION ACTION INFO
Ptojcct M.'\nagrt
-::-':-.:
Cont. Commerct-lll.'·gt
Silo S•loly t. Htnll~ ~
.,
,
.;'
CQC System Mngr
Design Control /~'i '
Projoct Controllolntr _/
Silt Planolftt llrlfr
- /
Coost COftltolllrlsr
Prot•Mttlt at.tt
CM · Infra · 111•-•t.~s

tM • L.i!Ms /
CII · I!U
,._., E.,.& l ...ltcs /olngr
s- ~ tlliel

._ill..,
GMIIII!Ismltfllt

""""""'
IHil

Page 1 of 1
j Alloohmeotto ENG FORM 4025-R
DocuSign Envelope ID: 413598BE-38EB-4AE9-B4B8-4E2CDFE62486

John Wong Kok Hee Kok Hee 17-Oct-2021

28 MAY 2022
1. Comply as per QCS 2014/project Specs/Approved Drawings. 2. Provide recent previous ashghal Projects approval for
the HVAC support System manufacturer. 3)Provide the duct & pipe support calculations.

29-May-2022
- Please refer to the attached CDF

25Dec2021 25Dec2021
 PROJECT MANAGER EMPLOYER CONTRACTOR

dar
Outar Company for a 'J-b~oJI a .:JJ-.-''.J I
AHpo rt 5 Operdt iOil ~-l LIJ9 OJI);J
and Managernenl u iJ~I
~1COOOIIIIIAC'f(ilri.Qfll~

MATAR J L...b..D .. ll'f\fiDCONfMI:ntiM)tO NIC''II

MATERIAL SUBMITIAL (MS)

Contract No.: HIAEP-00 17
Project Name: HAMAD INTERNATIONAL AIRPORT EXPANSION PROJECT
Reference No.: MS No.: ME-000 17 -AOOOO-CN-CCC-P-P 1-MAR-00008-Rev.O I I Date: ? Q SI=P ?fl?i
Contract Title: WESTERN FUEL FARM & MIDFIELD FUEL FARM EXPANSION WORKS
TO: DAR FROM: CCCITCCJV
Description of Material (One item only per form): I
~ As per Specification 0 Alternative
Title: Material Submittal for Supports &Accessories (Canopy & Rain Water GS Pipes) SAMPLE
Description: Area of Application: Western Fuel Farm & Midfield Fuel Farm Expansion DYES ~NO
• Attach all relevant technical literature marked to identify relevant descriptions, current test certificate, samples, etc .
• Attach a certificate stating compliance with Contract requirements .
• Highlight any element of contractual non-compliance in this submittal.
References: Planned Dates for Applicable Submittal for: Date
Please look at below mentioned section with
Drawing Ref. No.: list of draw1ngs.
I. 0 & M Manual N/A
Specification No.: 230529-A 2. Client/End User Training N/A
BOO Ref. No.: 3. Specifiedfrecommended spare parts N/A
Will be provide
International Standards:
Ref:
. 4. Warranties and Guarantees on handover of
proJeCt.
Manufacturer I SupJ lier:
Company Name: TEMBO GLOBAL INDUSTRIES LIMITED Locally Manufactured: Origin: India
r.("(" M•nuf..,..., ,rPd-
-
Address: Plol No PAP- 0 146 - 147, Turbhe MIDC, TTC
Industrial Area, Balmer Lawrie Van Leer Co
Production Period: -
Turbhe . Navi Mumbai - 400 705. Delivery Ex-Works: 6 Weeks
Maharashtra - INDIA Total Delivery Time: 6 Weeks
Local Agent: WILTZ TRADING & CONTRACTING WLL
Overland:
P.O. Box: 96143 Sea Freight:
Doha-Qatar Total Freight: -
PROGRAMME CONTRACTOR'S AUTHORIZEP..,SIGNATURE
Date Required on Site: I 22 Oct 2021
Expecmd Date of Arrival on I 20 Oct 2021 'TI. ( -~
PM/CM'S COMMENTS
No further comments ~ t)·~Vf"''
\
- I

~ ~"' gned by:

'"'
Engineering Mana)!er
Signed by: & 1111 14
Resident En'gineer
o I 2IJ

DOCUMENT STATUS:
!Z Code I: Reviewed- Work may proceed. 0 Code 2: Reviewed as Noted - Work may proceed subject
to incorporation of comments indicated.
0 Code 3: Rejected- Revise and resubmit. Work may not 0 Code 4: Returned - Review not required.
proceed.
IMPORTANT: Permission to proceed on behalf of HIAEP does not constitute acceptance or approval
PM/CM's
by HIAEP of design, calculations, analysis, tests, and methods of materials developed or selected by
Stamp
the Contractor and does not relieve him from compliance~ith his contractual obligations.

y t--~~ t_~AA
PM/CM Representative
Lf n Ito l2.a. t. ,
Date
Contractor's
Stamp
Signature
CC: I
DAH r, ,,n- CON f MCJ ~-' ~
 Material Approval – Consultant’s Review Checklist
Project Name: Construction of Industrial Bus Project ID: BA-2019-C-030-G
Depot Site 22
Contractor: REDCO International Document Ref: / Rev. S22-IND-REI-ME-MAS-
00041 Rev. 00
Consultant: AECOM Contract No C2020/xx
Client / Engineer: PWA Discipline: Mechanical
Type of Material: Hangers & Supports Area of Application: Using for Mechanical
works
Consultant Review on below mentioned Items Are these Remarks
details
available

(Yes / No /
NA)
1 Name of the Product/Material YES
2 Name & Address of the Manufacturer YES
3 Name & Address of the Supplier / Local Agent YES
4 Company Profile YES
5 Product Catalogue / Technical Data Sheet of the material YES
6 Materials Safety Data Sheet (MSDS) NO Not attached.

7 Compliance Sheet/Statement of the proposed YES

product/material with reference to the Project Specification,
QCS 2014. – Signed and stamped by the Manufacturer and
the Contractor.
8 Manufacturer’s Test Certificate (MTC) of the proposed NO Not attached
9 material
Independent Laboratory Test Reports of the proposed YES
material
10 ISO Certificates of the Manufacturer YES
11 Warrantees for the Material as per the Project Specification. YES
12 Previous Approvals of the proposed material in ASHGHAL YES
Projects
13 Commercial & Trade License of Local agent/supplier YES
14 Material samples - Refer QCS 2014, Section 1 Part 9 YES
15 NO Not attached because the
Listed
1. under Ashghal Approved Vendor or not proposed material has no category
in ASHGAL approved vendor list.
16 Is the proposed Material GSAS Compliant or not NO Not available.

Explain/ Justify, if applicability “No” or “NA” in Remarks Column

Please refer to remarks next to each item.
Consultant’s Review Approved with comments – “B”
Recommendation
Consultant’s Discipline Engineer (Site Team) Consultant’s Discipline Engineer (Core Team)
Name Mohammed Muhanna Name Onur Odyakmaz
Signature Signature

Date 22-10-2020 Date 22-10-2020

S00-AEC-CON-TMP-0003a_Template_Material submission Review Checklist, Rev.02 dated 4 July

2020
 Submission Response Sheet –(Material Submittal)
Date 05 November 2020
Project: Construction, Completion and Maintenance of Police College Complex
Contractor Hassanesco Trading & Contracting
Consultant CEG International
Client Ministry of Interior
Submittal Ref: HCC-PCC-MAR-ME-0191_Rev.00
Description HVAC & Refrigeration Supports System / Tembo Seven Star – India /
Wiltz Trading & Contracting - Qatar

Status: Approved Approved as Noted Revise & Resubmit Rejected

R
e
j MOI Comments
e
c Approval Subject to Consultants Comments .
t
e CEG Comments
d

***End of comments***
6/22/2021 Aconex

Lusail-BP12-B-Lusail Plaza Towers Plot No.02 - Main Work

Lusail Develpoment
Doha
23175 Qatar

MAIL TYPE MAIL NUMBER REFERENCE NUMBER

Workflow Transmittal Darr-WTRAN-038192 Darr-WTRAN-038192

Final (WF-023861) CSC Review & Approval R1 - 9205-BP12B-MMJV-MAT-ME-

NS-000-00034-Rev.000 - Material Approval Submission for (Clamps, Hangers,
Fasteners & Support Systems) BY WILTZ TRADING AND CONTRACTING
W.L.L.

From Mr Jinshad Ali - DAR AL HANDASAH

To
(5) Mr Shabeer Moidunny - DAR AL HANDASAH

Mr Jinshad Ali - DAR AL HANDASAH

Mr Wasim kalam - DAR AL HANDASAH

Mr Meinard Naranjo - DAR AL HANDASAH

MMJV Document Control (562QLT-DC) - MIDMAC-MIC Construct Joint Venture (MMJV)

Cc
(30) Mr Christopher Bell - Louis Berger - QPM Joint Venture

Mr Ammar Soufani - Louis Berger - QPM Joint Venture

Mr Jan Kendel - Louis Berger - QPM Joint Venture

Mr Ahmad Abusada - Louis Berger - QPM Joint Venture

Document Control Lusail - Lusail Real Estate Development Company

Mr Alaa Abughaidah - Lusail Real Estate Development Company

Mr Eyad Soltan - Lusail Real Estate Development Company

Mr Louis Saleh - Lusail Real Estate Development Company

Ms Helen Aguinillo - MIDMAC-MIC Construct Joint Venture (MMJV)

Arnan Guiao - MIDMAC-MIC Construct Joint Venture (MMJV)

Mr Konstantinos Koutoumbas - MIDMAC-MIC Construct Joint Venture (MMJV)

Mr Toni Aouad - MIDMAC-MIC Construct Joint Venture (MMJV)

Mr Fadi Brigui - MIDMAC-MIC Construct Joint Venture (MMJV)

Mr Tarek ElGammal - MIDMAC-MIC Construct Joint Venture (MMJV)

Mr Samer Tawfik - MIDMAC-MIC Construct Joint Venture (MMJV)

Mr Rabih Fayad - MIDMAC-MIC Construct Joint Venture (MMJV)

Mrs Ipek Oztekin - MIDMAC-MIC Construct Joint Venture (MMJV)

Sohail Devra - MIDMAC-MIC Construct Joint Venture (MMJV)

Mohammad Alam - MIDMAC-MIC Construct Joint Venture (MMJV)

Dearlie Dubouzet - Rider Levett Bucknall Dubai

https://mea.aconex.com/Logon 1/2
6/22/2021 Aconex

Mr Simon Nsubuga - Rider Levett Bucknall Dubai

Umesh Laxhman - Rider Levett Bucknall Dubai

Ronalyn Llanto - Rider Levett Bucknall Dubai

Mr Garumuni De Zoysa - Rider Levett Bucknall Dubai

Mr JUDY QUICKSON - Rider Levett Bucknall Dubai

Irene Cunanan - Rider Levett Bucknall Dubai

Mr Narendra Pathak - Rider Levett Bucknall Dubai

Mr Vishnughanthan Srikanthan - Rider Levett Bucknall Dubai

Ms Ai Siew Yu - Rider Levett Bucknall Dubai

Mr Altaf Abdulgafar Motiwala - Rider Levett Bucknall Dubai

Sent Wednesday, 19 May 2021

MESSAGE

Workflow Review History

The attached documents have completed the "CSC Review & Approval R1 - 9205-BP12B-MMJV-MAT-ME-NS-000-00034-Rev.000 -
Material Approval Submission for (Clamps, Hangers, Fasteners & Support Systems) BY WILTZ TRADING AND CONTRACTING W.L.L."
workflow with the following results :

This transmittal was automatically generated.

Doc No Step Participant Review Outcome Comments

9205-BP12B-MMJV-
CSC Review & Approval J Ali Approved with Comments
MAT-ME-NS-000-00034

9205-BP12B-MMJV-
MAT-ME-NS-000-OCS- CSC Review & Approval J Ali Actioned
00034

https://mea.aconex.com/Logon 2/2
 QETAIFAN ISLAND NORTH DEVELOPMENT PHASE-1 - RETAIL PLAZAS
Design & Construction
Contract No.:

Observations & Comments Sheet (OCS)

OCS Ref. No.: RP-MAS-QBEC-MEC-00032_00 OCS Rev. : 01 Project Stage:Construction Construction
Engineer in Charge: Barton Denbeigh Ferguson OCS Date: 06/087/2020 Discipline: MECH STR
Doc or Dwg Title, Ref.No and Rev.: MATERIAL SUBMITTAL FORPIPE HANGERS & SUPPORTS FOR HVAC PLUMBING DRAINAGE & FIRE FIGHTING APPLICATION (MFR-TEMBO Sevenstar-INDIA-/SUPLL:WILTZ TRADING &CONT WLL)
The document(s) reviewed under this OCS, were issued "For Review and Comments" under the Contractor's Transmittal Ref.: RP-MAS-QBEC-MEC-00032_00 , dated on 03/08/2020, and are hereby returned to the issuer with the following return code and actions request:

A = Approved B = Approved As Noted

C = Not Approved, Resubmit D = Information, Record E = Incomplete, Resubmit
Assessment Code: B
ATKINS CONTRACTOR’s Input ATKINS
Identification of Comment's
Reviewer Ref. Reference Number of Doc. Sign-Off
S/N source: Observations / Comments Returned Code Comments (if any) (Open/Closed)
Indicator or Drawing (Open/Closed)
(Title /Page /Clause)

Proposed Brand Tembo Sevenstar- India for Hangers,

Supports & vibration isolation is not accepted as it is not
mentioned in the approved project vendor list. Proposed Tembo Sevenstar is there in approved vendor list of
Rev-01 Tembo sevenstar is not in the vendor list & used Vibration Isolators.
as an alternative or replacement in most of the projects.
Proposed brand 'Tembo Sevenstar' is UL Listed & FM
Prequalification approval is for supplier not for brand. This RP-MAS-QBEC-MEC-
1 MEC Specification & Drawings
brand is rejected & contractor to propose brands from 00032
B Approved and equivalent to approved Vendor List. Closed
Attached also is approval copy of Tembo Sevenstar from
PVL.
Qetaifan Package 5 Hotel Project for MEP & Electrical
Rev-02: Considering the Tempo sevenstar delivered supports. Kindly consider , refer section 3
projects in Qatar, it is accepted subject to meet the below
comments and performance during execution stage.

Compliance for the associated Y Clauses is not included

in the material submittal. Contractor to provide. RP-MAS-QBEC-MEC-
2 MEC Specification & Drawings
Rev-01 Y clause compliance is provided. 00032
B Comply ,Y Clause compliance provided, Refer Section 1 Closed

Approved vendor list shall be included in the next

submission.
Rev-01 Reply noted not acceptable. Vendor list is not
provided. Also in Rev-01 complete material submittal to
be submitted. Revise. RP-MAS-QBEC-MEC-
3 MEC Specification & Drawings
00032
B Comply, refer revised material submittal 02 - section 2 Closed
Rev-02: Material submittal is generic, specific to location
to be provided and also shall meet the spefication and
approved shop drawing stage requirements and standard
detail drawings.
Contractor to provide a support schedule clearly
indicating that which support will be used for which
particular service. Mention the model no. of the supports
against each service.
Rev-01 Not acceptable. Schedule shall be provided with
RP-MAS-QBEC-MEC- Comply, Schedule of Material attached, refer revised material
4 MEC Specification & Drawings complete MAS.
00032
B submittal 02 - section1
Closed
Rev-02: Material submittal is generic, specific to location
to be provided and also shall meet the spefication and
approved shop drawing stage requirements and standard
detail drawings.
Contractor to ensure that rubber inserts proposed for the
chilled water piping system shall have the same Comply, Thickness of Rubber Support Instert shall be
RP-MAS-QBEC-MEC-
5 MEC Specification & Drawings thickness as of insulation. Highlight the same and remove
00032
B provided Equal to insulation of Piping for chilled water Closed
the catalogues which are not relevant to the project. piping.
Rev-01 Accepted.

ASTAD-SFD-ADE-702 - 25.10.2011 - OCS for CONTRACTORS Page P1 of 1

 UCC ALWAJBA PALACE
Observations & Comments Sheet (OCS)
OCS Ref. No.: SPC6092-OCS-MT-00-0001 OCS Rev. : 0 Project Stage: Design & Const.
Engineer in Charge: Rami Mahfouz OCS Date: 02/09/2020 Discipline: Mechl.
Doc or Dwg Title, Ref.No and Rev.: MAIN VILLA - MATERIAL SUBMITTAL FOR FASTENERS, ANGLES, CHANNEL, NUTS & BOLT FOR MEP.
The document(s) reviewed under this OCS, were issued "For Review and Approval" under the Contractor's Transmittal Ref.: SPC6092/UCC/WP2B/DT/0323 Dated: 30/08/2020 and are hereby returned to the issuer with the following return code and actions request:

A = No Comments/ Proceed B= Commented/Can Proceed

Assessment Code: B C = Incorporate Comments & Resubmit D= Rejected

CM/ASTAD CONTRACTOR’s Input CM / ASTAD

Identification of
Reviewer Document
comment's Reference Number of Doc. Sign-Off
S/N Ref. Observations / Comments Returned Comments (if any) (Open/Closed)
Indicator
source: (title or Drwg. (Open/Closed)
Code
/page /clause)

No objection for the proposed make subject to compliance on below SPC6092-UCC-MT-00-0001

1 2078OG General B OPEN
comment. Rev.0

Hangers and supports shall be hot dip galvanized as specified but the
HVAC specs. 5062-
highlighted item in technical data sheet is electro-galvanized where SPC6092-UCC-MT-00-0001
2 2078OG QDC-SPC-05-0001 B OPEN
the coating is suitable for indoor use/dry areas only. Please comply as Rev.0
page 17.
specified/clarify prior to proceed.

SPC6092-OCS-MT-00-0001 Page 1 of 1
7/8/2020 Aconex

Eufraim Lawrence Ponce Final (WF-004778) Construction Submission for PMC R… YESTERDAY
LOUIS BERGER - QPM JOINT VENTURE WORKFLOW TRANSMITTAL LBQPMJV-WTRAN-002046

Lusail-BP12-C- Lusail Plaza Towers Plot No.03 - Main Work

Lusail Develpoment
Doha
23175 Qatar

MAIL TYPE MAIL NUMBER REFERENCE NUMBER

Workflow Transmittal LBQPMJV-WTRAN-002046 LBQPMJV-WTRAN-002046

Final (WF-004778) Construction Submission for PMC Review / Approval- 9206-

BP12C-HDEC-PRS-PR-NS-000-00151 Prequalification of M/s Wiltz Trading and
Contracting W.L.L For Tembo Seven Star Pipe Hanger and Support For HVAC
Plumbing and Fire Fighting Appl

From Eufraim Lawrence Ponce - Louis Berger - QPM Joint Venture

To (6) Ms Rose Ann Bilgic - Hyundai Engineering & Construction QATAR (+5 more...)

Cc (41) Mr Jaekyoung Kim - Hyundai Engineering & Construction QATAR (+40 more...)

Sent Tuesday, 7 July 2020 6:58:34 PM GST (GMT +04:00)

Status N/A

DOCUMENT ATTACHMENTS (2)

(0 selected)

Revision
File Document No Revision Title Status
Date

Prequalification of M/s Wiltz Trading and Contracting B-

9206-BP12C-
W.L.L For Tembo Seven Star Pipe Hanger and Support Approved
HDEC-PRS-PR- 000 25/06/2020
For HVAC Plumbing and Fire Fighting Application with
NS-000-00151
(BP12C-PLOT 3) Comments

9206-BP12C- Prequalification of M/s Wiltz Trading and Contracting

HDEC-PRS-PR- W.L.L For Tembo Seven Star Pipe Hanger and Support
000 25/06/2020 Actioned
NS-000-OCS- For HVAC Plumbing and Fire Fighting Application
00151 (BP12C-PLOT 3)

MESSAGE

Workflow Review History

https://mea.aconex.com/Logon?Action=View&ENTITY=MAIL&ID=1776344650&USERID=1744922300 1/2
7/7/2020 Aconex

Gina Rios Final (WF-004737) Construction Submission for PMC R… YESTERDAY

LOUIS BERGER - QPM JOINT VENTURE WORKFLOW TRANSMITTAL LBQPMJV-WTRAN-001961

Lusail - BP12-D-Lusail Plaza Towers Plot No.04- Main Work

Lusail Develpoment
Doha
23175 Qatar

MAIL TYPE MAIL NUMBER REFERENCE NUMBER

Workflow Transmittal LBQPMJV-WTRAN-001961 LBQPMJV-WTRAN-001961

Final (WF-004737) Construction Submission for PMC Review / Approval-9207-

BP12D-HDEC-PRS-PR-NS-000-00151 Prequalification of M/s Wiltz Trading and
Contracting W.L.L For Tembo Seven Star Pipe Hanger and Support For HVAC
Plumbing and Fire Fighting Appli

From Gina Rios - Louis Berger - QPM Joint Venture

To (6) Ms Rose Ann Bilgic - Hyundai Engineering & Construction QATAR (+5 more...)

Cc (41) Mr Jaekyoung Kim - Hyundai Engineering & Construction QATAR (+40 more...)

Sent Monday, 6 July 2020 2:14:31 PM GST (GMT +04:00)

Status N/A

DOCUMENT ATTACHMENTS (2)

(0 selected)

Revision
File Document No Revision Title Status
Date

Prequalification of M/s Wiltz Trading and Contracting B-

9207-BP12D-
W.L.L For Tembo Seven Star Pipe Hanger and Support Approved
HDEC-PRS-PR- 000 25/06/2020
For HVAC Plumbing and Fire Fighting Application with
NS-000-00151
(BP12D-PLOT 4) Comments

9207-BP12D- Prequalification of M/s Wiltz Trading and Contracting B-

HDEC-PRS-PR- W.L.L For Tembo Seven Star Pipe Hanger and Support Approved
000 25/06/2020
NS-000-OCS- For HVAC Plumbing and Fire Fighting Application with
00151 (BP12D-PLOT 4) Comments

MESSAGE

Workflow Review History

https://mea.aconex.com/Logon?Action=View&ENTITY=MAIL&ID=1776297817&USERID=1744917221 1/2
7/8/2020 Aconex

Eufraim Lawrence Ponce Final (WF-004778) Construction Submission for PMC R… YESTERDAY
LOUIS BERGER - QPM JOINT VENTURE WORKFLOW TRANSMITTAL LBQPMJV-WTRAN-002046

Lusail-BP12-C- Lusail Plaza Towers Plot No.03 - Main Work

Lusail Develpoment
Doha
23175 Qatar

MAIL TYPE MAIL NUMBER REFERENCE NUMBER

Workflow Transmittal LBQPMJV-WTRAN-002046 LBQPMJV-WTRAN-002046

Final (WF-004778) Construction Submission for PMC Review / Approval- 9206-

BP12C-HDEC-PRS-PR-NS-000-00151 Prequalification of M/s Wiltz Trading and
Contracting W.L.L For Tembo Seven Star Pipe Hanger and Support For HVAC
Plumbing and Fire Fighting Appl

From Eufraim Lawrence Ponce - Louis Berger - QPM Joint Venture

To (6) Ms Rose Ann Bilgic - Hyundai Engineering & Construction QATAR (+5 more...)

Cc (41) Mr Jaekyoung Kim - Hyundai Engineering & Construction QATAR (+40 more...)

Sent Tuesday, 7 July 2020 6:58:34 PM GST (GMT +04:00)

Status N/A

DOCUMENT ATTACHMENTS (2)

(0 selected)

Revision
File Document No Revision Title Status
Date

Prequalification of M/s Wiltz Trading and Contracting B-

9206-BP12C-
W.L.L For Tembo Seven Star Pipe Hanger and Support Approved
HDEC-PRS-PR- 000 25/06/2020
For HVAC Plumbing and Fire Fighting Application with
NS-000-00151
(BP12C-PLOT 3) Comments

9206-BP12C- Prequalification of M/s Wiltz Trading and Contracting

HDEC-PRS-PR- W.L.L For Tembo Seven Star Pipe Hanger and Support
000 25/06/2020 Actioned
NS-000-OCS- For HVAC Plumbing and Fire Fighting Application
00151 (BP12C-PLOT 3)

MESSAGE

Workflow Review History

https://mea.aconex.com/Logon?Action=View&ENTITY=MAIL&ID=1776344650&USERID=1744922300 1/2
7/7/2020 Aconex

Gina Rios Final (WF-004737) Construction Submission for PMC R… YESTERDAY

LOUIS BERGER - QPM JOINT VENTURE WORKFLOW TRANSMITTAL LBQPMJV-WTRAN-001961

Lusail - BP12-D-Lusail Plaza Towers Plot No.04- Main Work

Lusail Develpoment
Doha
23175 Qatar

MAIL TYPE MAIL NUMBER REFERENCE NUMBER

Workflow Transmittal LBQPMJV-WTRAN-001961 LBQPMJV-WTRAN-001961

Final (WF-004737) Construction Submission for PMC Review / Approval-9207-

BP12D-HDEC-PRS-PR-NS-000-00151 Prequalification of M/s Wiltz Trading and
Contracting W.L.L For Tembo Seven Star Pipe Hanger and Support For HVAC
Plumbing and Fire Fighting Appli

From Gina Rios - Louis Berger - QPM Joint Venture

To (6) Ms Rose Ann Bilgic - Hyundai Engineering & Construction QATAR (+5 more...)

Cc (41) Mr Jaekyoung Kim - Hyundai Engineering & Construction QATAR (+40 more...)

Sent Monday, 6 July 2020 2:14:31 PM GST (GMT +04:00)

Status N/A

DOCUMENT ATTACHMENTS (2)

(0 selected)

Revision
File Document No Revision Title Status
Date

Prequalification of M/s Wiltz Trading and Contracting B-

9207-BP12D-
W.L.L For Tembo Seven Star Pipe Hanger and Support Approved
HDEC-PRS-PR- 000 25/06/2020
For HVAC Plumbing and Fire Fighting Application with
NS-000-00151
(BP12D-PLOT 4) Comments

9207-BP12D- Prequalification of M/s Wiltz Trading and Contracting B-

HDEC-PRS-PR- W.L.L For Tembo Seven Star Pipe Hanger and Support Approved
000 25/06/2020
NS-000-OCS- For HVAC Plumbing and Fire Fighting Application with
00151 (BP12D-PLOT 4) Comments

MESSAGE

Workflow Review History

https://mea.aconex.com/Logon?Action=View&ENTITY=MAIL&ID=1776297817&USERID=1744917221 1/2