Digital automatic universal tester for displacement controlled tests

as CBR, Marshall, indirect tensile, unconfined compression and many others

¶¶ Closed loop digital speed control.

¶¶ CBR and MARSHALL test speed can be selected by default.
¶¶ Other testing speeds (Custom) between 0.2 and 51 mm/min, can be
easily set.
¶¶ Selection of maximum platen displacement;
¶¶ The automatic stop of the machine avoids machine and specimen
overloading, thus assuring operator safety.
¶¶ Rapid approach function, to reduce the testing time.
¶¶ Rapid platen return to speed up the platen base return at the end of
the test.
¶¶ Speed calibration function by firmware. The test speed is originally
factory calibrated using a polynomial interpolation. A test point is
provided to verify the speed with a standard tachometer.
¶¶ Emergency stop button as required by the CE prescriptions.

Standards EN 12697-34 | ASTM D1883 | ASTM D1559 | ASTM D5581 | AASHTO T245 | EN 12697-12 | EN 12697-23 | ASTM D4123 | NF P98-251-1/4 | BS 598:107 | BS 1377:4 |
NF P94-078 | AASHTO T193 | EN 13286-47 | ASTM D6927 | DIN 1996 | UNI CNR 10009 | CNR 30 | CNR 34

The new MULTISPEED tester is the ideal solution for Road testing and controls are housed in a specially designed base cabinet. When fit in
laboratory. The 50 kN capacity and the fully variable test speed of 0.2 to the digital mode, test data are acquired and processed by the Digimax
51 mm/min make it possible to perform not only the CBR and Marshall Touch Data acquisition and relevant PC software. See accessories.
tests, but many other applications as for instance Indirect Tensile test, One of the main features of the new MULTISPEED is the control of test
Quick Triaxial tests, Unconfined and Uniaxial soil testing and, in general, speed which is first easily set and then shown on the display. Furthermore,
all test to be performed under displacement control. The machine can the test stroke can be set at the beginning of the test with automatic stop,
be equipped with analogical or digital load/displacement measurement avoiding to overload the machine and the specimen, thus assuring the
systems as well as with the specific accessories, to suit either the field or operator safety. This important feature also permit to perform the speed
central laboratory requirement. calibration of the machine by micrometric manual adjustment by the
operator. The display also show the travel direction of lower platen. The
The MULTISPEED tester feature a rigid two column structure with upper front panel is also fitted with an emergency button and two operating
cross beam which can be set at various height. The load jack, DC motor led: machine switched on and travel direction.
Technical specidications Marshall accessories EN 12697-34*, Marshall: EN 12697-34, ASTM Accessories to perform Indirect
ASTM D1559, ASTM D5581, ASTM D1559, ASTM D6927 tensile tests on bituminous
6927-06, AASHTO T245, mixtures to Standards EN 12697-
- Max. capacity: 50 kN BS 598-107, NF P98-0251-2,
34-V0107/MAR 12, EN 12697-23, ASTM D4123,
- Test speed range, infinitely DIN 1996, CNR 30 Test set for performing Marshall tests CNR 34
variable: 0.2 to 51 mm/min Note: The EN* Standard specifies that Marshall in digital mode, including:
- Power: DC motor 750 W Testers must be used in digital mode with a - 82-P0375 Load cell, 50 kN capacity 82-P0375
- Horizontal clearance (distance recording unit. - 82-P0375/C Adapter to fit load cell Load cell, 50kN capacity
between columns): 270 mm 82-T1009/F (two pieces)
82-P0375/C
- Max. vertical daylight (without Load ring, 50 kN capacity, with - 82-P0322 Displacement transdu-
accessories): 730 mm cer, 25 mm travel Adapter to fit load cell (two pieces)
stembrake
- Platen travel: 100 mm 82-T1007/F - 34-T0104/81 Adjustable transdu- 82-P0322
- Overall dimensions (lxwxh): 392 x cer holder Displacement transducer, 25mm travel
Load ring, 30 kN capacity, with - 34-T0104/13 Compression device
495 x 1213 34-T0104/81
stembrake (as alternative to extension
- Net weight approx.: 65 kg 82-T1009/F)
- 34-T0104/10, Compression device Adjustable transducer holder
- Alphanumeric display 2x16 cha-
racters 34-T0104/10 - 76-B0033 Marshall stability mould 34-T0104/13
Compression device. 4” Compression device extension
76-B0034 34-T0104/10
Ordering information 82-P60R02
Flow meter. Compression device
DIGIMAX TS Data acquisition system.
76-B0033 See specifications above. 76-B0078/B
34-V1072
Stability mould. 82-SW/CMU Tensile splitting device or, alternatively,
MULTISPEED, digital compression
tester, 50 kN cap., testing speed 76-B0078/C
PC software for CBR, Marshall, Indirect
steplessly adjustable from 0.2 to 51
Accessories for performing tensile and universal tests. Optional. 82-P60R02*
mm min. 230 V, 50-60 Hz, 1 ph DIGIMAX TS Data acquisition system.
tests in digital mode.
34-V1074 See specification above.
Same as above but 110 V, 60 Hz. 1 Ph CBR: EN 13286-47, ASTM D1883, Accessories for performing
82-SW/CMU
AASHTO T193 both CBR and Marshall tests
in the digital mode PC software for CBR, Marshall, Indirect
Accessories 34-V0107/CBR tensile and universal tests. Optional.
Test set for performing CBR tests in 34-V0107/CM
Accessories for performing digital mode, including: Accessories to perform Unconfined
Test set for performing CBR and compression on soil specimens to
tests in analogue mode - 82-P0375 Load cell, 50 kN capacity Marshall tests in digital mode, EN 12697-12, EN 12697-23, ASTM
- 82-P0375/C Adapter to fit load cell including: D4123, CNR 3 standards
CBR Accessories to EN 13286-47, (two pieces) - 82-P0375 Load cell, 50 kN capacity
ASTM D1883, AASHTO T193, - 82-P0322 Displacement transdu- 82-P0375
BS 1377:4, NF P94-078, UNI CNR - 82-P0375/C Adapter to fit load cell
cer, 25 mm travel (two pieces) Load cell, 50kN capacity
10009 standards
- 34-T0104/81 Adjustable transdu- - 82-P0322 Displacement transdu- 82-P0375/C
34-T0103/3 cer holder cer, 25 mm travel Adapter to fit load cell (two pieces)
Adjustable penetration piston - 34-T0103/1 Adjustable CBR pene- - 34-T0104/81 Adjustable transdu-
complete with dial holder and dial tration piston 82-P0322
cer holder
gauge 30 x 0.01 mm div. Displacement transducer, 25mm travel
- 34-T0103/1 Adjustable CBR
82-T1009 82-P60R02 penetration piston 34-T0104/81
Load ring 50 kN cap., fitted with dial DIGIMAX TS Data acquisition system, - 34-T0104/13 Compression device Adjustable transducer holder
gauge 0.001 mm div. featuring: Large size touchscreen extension
display, Very easy to use menus with
34-T0104/13
- 34-T0104/10 Compression device Compression device extension
or, as alternative: intuitive selections, self-explanatory
- 76-B0033 Marshall stability mould
icons, optimized test procedures, 34-T0104/10
34-T0103/3C 4”
PC connection via LAN port allowing Compression device
Adjustable penetration piston faster communication, better stability
complete with dial holder and dial 82-P60R02* 76-B0078/B
and longer cable lengths compared to
gauge 10 x 0.01 mm div. an RS232 serial connection, DIGIMAX TS Data acquisition system Tensile splitting device or, alternatively,
Advanced calibration menus with See specifications above. 76-B0078/C
82-T1009/C
Load ring 50 kN cap., fitted with dial linearization functions, firmware- 82-SW/CMU 82-P60R02*
gauge 0.01 mm div. driven procedures, secure file storage, PC software for CBR, Marshall, Indirect
Unlimited data storage on USB pen DIGIMAX TS Data acquisition system
tensile and universal tests. Optional. See specifications above
drives
82-SW/CMU 82-SW/CMU
PC software for CBR, Marshall, Indirect PC software for CBR, Marshall, Indirect
tensile and universal tests. Optional. tensile and universal tests.
Universal compression tester Multispeed 34-V1072 with Marshall accessories in the analogical mode Multispeed 34-V1072 fitted in the digital mode to perform the Marshall test, complete with the Digimax TS unit

Multispeed 34-V1072 Examples of displays

Detail of the accessories to perform the CBR test in the digital mode Detail of the accessories to perform the Marshall test in the digital mode

Detail of the accessories to perform the indirect tensile test in the digital mode Detail of the accessories to perform the Uncofined test on soil in the digital mode

controls-group.com controls.es
controls.fr controlstesting.co.uk CONTROLS S.R.L.
is certified ISO 9001:2008
contralsitalia.it controlsmiddleeast.com
controls.com.mx controls-usa.com
V1072 multispeed_DB_22.04.15_UK In line with its continual program of product research and development, CONTROLS S.R.L. reserves the right to alter specifications to equipment at any time.