MP10

Vishay Angstrohm
Power Rheostats
25 Watt
FEATURES
• Diameter 1 9/16" [39.69mm]
• Depth behind panel 1 3/8" [34.92mm]
• Shaft 1/4" [6.35mm] diameter
• Rotation 300° ± 5°
• Weight 0.180 pounds (82 grams)
• Mounts on panels up to 1/4" [6.35mm] by means of a 3/8" [9.52mm], 32 bushing
and hex nut
• Non-turn lugs require 3/16" [4.76mm] hole, 1/2" [12.70mm] below center of shaft -
Model "A" shaft
• U. L. Recognized, File No. E51076

RESISTANCE VALUES* DIMENSIONS in inches [millimeters]

TOTAL MAXIMUM APPROXIMATE 27/32 1 3/8 Knob # 552
OHMS AMPS STEPS [21.43] [34.92]
1 9/16
1.0 5.00 28 [39.69] 11/32
2.0 3.54 31 Dia. [8.73]
1/4
3.0 2.89 48 1/2 [6.35]
[12.70]
6.0 2.04 51
8.0 1.77 54 1 1/2
[38.10]
10.0 1.58 54 31/32 3/4
1/32 [24.61] [19.05]
15.0 1.29 64 [.794] Dial # 548
25.0 1.00 86
35.0 0.85 105 .093 [2.36] Holes 3/8 .064 [1.63]
[9.52]
50.0 0.71 115 for No. 2 Screws BUSHING 3/8 [9.52].
32 Thread with a
75.0 0.58 135 3/32 [2.38] Thick
100.0 0.50 152 Hex Nut
125.0 2 1/4 [57.15]
0.45 143
175.0 0.38 160
250.0 0.32 185
350.0 0.27 205
DERATING
500.0 0.22 230 Angstrohm rheostat standard wattage 120
% OF RATED LOAD

750.0 0.18 270 ratings are based on a 300°C rise in 100

1000.0 0.16 292 “free-air” in ambient not exceeding 80
1500.0 0.13 353 + 40°C (shown). For other applica- 60
2500.0 0.10 358 tions, wattage ratings are available 40
3500.0 0.08 392 based on 340°C rise in "free-air" in 20
5000.0 0.07 440 ambient not exceeding + 25°C, and in 0
other cases + 50°C. 40 100 150 200 250 300 350
* All other intermediate resistance values are available AMBIENT TEMP. DEG. CENTIGRADE
and can be manufactured on a normal delivery cycle.

SPECIAL SHAFTS in inches [millimeters]

1/2 3/4 5/8 27/32 11/32 [8.73]
11/32 [8.73] 5/8 [15.88] 1/2 [12.70]
[12.70] [19.05] [15.88] [21.43]

TYPE B: 1/2 [12.70], 11/32 [8.73] TYPE C: 3/4 [19.05], 5/8 [15.88] TYPE D: 5/8 [15.88], 1/2 [12.70] TYPE E: 27/32 [21.43], 11/32 [8.73]
Models. Slotted shaft with standard Models. Locking bushing with Models. Locking bushing with Models. Std. bushing and flatted shaft
bushing for 1/8 [3.18] panel. slotted shaft for 1/4 [6.35] panel. slotted shaft for 1/8 [3.18] panel. w/screwdriver slot for 1/8 [3.18] panel.

MARKING ORDERING INFORMATION

MP10 A 1500
— Resistance value MODEL BUSHING AND SHAFT CONFIGURATION VALUE
— Amps
A = Standard Flatted Shaft
— Date code
NOTE: For Additional Features: Submit detailed drawing information when ordering “non-standard” parts.

www.vishay.com Document Number: 66102

4 Revision 25-Aug-00
This datasheet has been download from:

www.datasheetcatalog.com

Datasheets for electronics components.