Scribd
Upload
104 views2 pages

P45-11041 Curve (Rev1) 20220325

Uploaded by

Raksha KM
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
104 views2 pages

P45-11041 Curve (Rev1) 20220325

Uploaded by

Raksha KM
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Pump size & type / Stages : 1K1.

5x1LF-82 M3 LF /1
Based on curve no. : MIII7066V
Impeller diameter : 144 mm

Customer : TRITEN IAG Capacity : 4.0 m³/h


Item number : P45-11041 Head : 32.90 m
Service : Nutrient Supply Tank No.3 Pump Density / Specific gravity : - / 1.111
Flowserve reference : 3893835127 Pump speed : 2,900 rpm
Date : March 25, 2022 Ns / Nss (per eye) : 334 / 1,860 (US)
Test tolerance : ANSI/HI 14.6 Grade 2U
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY....

Copyright © 2016 Flowserve. All rights reserved. Affinity v2.20.1


Hydraulic Datasheet

Customer : TRITEN IAG Pump / Stages : 1K1.5x1LF-82 M3 LF /1


Customer reference : Inquiry 30203-000-I-0057A-45 Centri... Based on curve no. : MIII7066V
Item number : P45-11041 Flowserve reference : 3893835127
Service : Nutrient Supply Tank No.3 Pump Date : March 25, 2022
Operating Conditions Materials / Specification
Capacity (rated/normal) : 4.0 m³/h / - Material column code : D4L
Water capacity (CQ=1.00) :- Pump specification : ASME B73.1
Total developed head : 32.90 m Other Requirements
Water head (CH=1.00) :- Hydraulic selection : No specification
NPSHa/NPSHa less margin : 10.3 m / - Construction : No specification
Maximum suction pressure : 0.5 barg Test tolerance : ANSI/HI 14.6 Grade 2U
Liquid Driver Sizing : Max Power(MCSF to EOC) using SF
Liquid type : Other Seal configuration : Single Seal
Liquid description : Nutrient
Temperature : 25 °C
Density / Specific gravity : - / 1.111
Solid Size - Actual / Limit : - / 6.350 mm
Viscosity / Vapor pressure : 1.00 cP / 0.03 bara
Performance
Hydraulic power : 0.40 kW Impeller diameter
Pump speed : 2,900 rpm Rated : 144 mm
Pump overall efficiency (CE=0.98) : 17.8 % Maximum : 208 mm
NPSH required (NPSH3) : 1.4 m Minimum : 102 mm
Rated brake power : 2.24 kW Ns / Nss (per eye) : 334 / 1,860 (US)
Minimum continuous flow :-
Maximum brake power : 2.59 kW Maximum head at rated diameter : 35.15 m
Driver power rating : 3.00 kW / 4.02 hp Flow at BEP : 6.5 m³/h
Casing working pressure : 4.3 barg Flow as % of BEP : 61.1 %
(based on shut off @ cut dia/rated SG) Efficiency at normal flow :-
Maximum allowable : 19.0 barg Impeller diameter ratio (rated/max) : 69.4 %
Hydrostatic test pressure : 28.5 barg Head rise to shut off : 6.9 %
Estimated rated seal chamber pressure : 0.7 barg Total head ratio (rated / max) / (max / rated) : 41.8 % / 239.3 %
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.
MCSF PROVIDES MECHANICAL PROTECTION ONLY. MINIMUM THERMAL FLOW MUST BE CALCULATED FOR THE SPECIFIC FLUID AND OPERATING CONDITIONS.

Copyright © 2016 Flowserve. All rights reserved. Affinity v2.20.1

You might also like