Scribd
Upload
55 views

Explanation To Report in RAC

High head pressure in a refrigeration system can be caused by improper compressor function, a dirty condenser coil restricting heat transfer, or overcharging of refrigerant. Other potential causes include unsuitable operating conditions, cooling issues with the condenser, restrictions in the refrigerant lines, and incorrect refrigerant charge amount. Maintaining proper condensing temperatures and pressures within the desired range is important to avoid system malfunctions.

Uploaded by

PaulDenver Villafuerte Dolores
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
55 views

Explanation To Report in RAC

High head pressure in a refrigeration system can be caused by improper compressor function, a dirty condenser coil restricting heat transfer, or overcharging of refrigerant. Other potential causes include unsuitable operating conditions, cooling issues with the condenser, restrictions in the refrigerant lines, and incorrect refrigerant charge amount. Maintaining proper condensing temperatures and pressures within the desired range is important to avoid system malfunctions.

Uploaded by

PaulDenver Villafuerte Dolores
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Explanation to report

Understanding and check floating head pressure

Ito yung pressure kung saan ang superheated na refrigirant gas ay namumuo sa liquid
upang pakainin ang mga naglo-load sa isang sistema ng pagpapalamig. Kapag ang
isang mas mababang pressure ay kinakailangan upang maganap ang change of state,
mas kaunting energy ang kinakailangan ng mga compressor upang maabot ang mas
mababang pressure. Ang mga kondisyon ng condensing ay karaniwang ineexpress sa
mga tuntunin ng temperatura, dahil ang temperature at pressure ay direct na nauugnay
kapag nasa ganitong state na. Generally, reduction of the condensing temperature
yields a 1.3% energy savings per degree Fahrenheit reduced.

HIGH HEAD PRESSURE

Maaari itong maging sanhi dahil sa improper function ng compressor. Kung ang compressor ay
hindi naghahatid ng sapat na nagpapalamig sa system, ang suction pressure ay mag iincrease.

Cause of High head pressure in chiller

Ang condenser water loop ay open to the atmosphere sa chiller. Ang mga maruruming particle
ay nagcoconentrate sa working liquid at sa pag bara ng system. Ang pagbabara ng system ay
nakakaapekto sa paglipat ng init sa pagitan ng surface at ang liquid. Sa huli, pinapadali nito ang
paglipat ng init sa pamamagitan ng system.

*What causes high head pressure in a refrigeration system?

Madami pang others reasons like improper charging of the refrigerant, unsuitable operating
condition, Improper cooling of the condenser.

*Causes of high head pressure on low suction pressure


The outside temperature can also affect the system’s performance. The higher outside
temperature can reduce the heat rejection from the system. it raises head pressure in the
system. It is desirable to maintain the condensing temperature of the system. The difference of
Tempeerature. between the condensing pressure and the outside temperature should be high.
*High head pressure in heat mode
It is difficult for any technician to charge heat pump during heating mode. The calculation for
charging refrigerant is critical in heating mode. The overcharging of the refrigerant leads to
many unwanted problems in the system.

One of the primary cause of head pressure to be high is the overcharging of the refrigerant.

*Cause of High head pressure on heat pump

If we take a reading in the heating mode, we make sure that the larger diameter pipe is the
delivery pressure and the smaller diameter pipe is the liquid pressure.

The pressure will fall below the limit if the flow is restricted from the inside coils. And It Will
reflect us by measuring pressure between the delivery line and the liquid portion line.

*Another Causes of high head pressure


The pressures of the system ay kailangan imaintained in the desired range para maiwasan ang
pag-malfunction.

The problem of the high head pressure was checked by inspecting the condenser fan and
condenser coil. and the another problem is observed by checking restrictions in the refrigerant
lines and the refrigerant charge condition.

You might also like