Scribd
Upload
28 views

PDMS-Pipework Application

1. The document provides instructions for creating various elements in PDMS Pipework including sites, zones, pipes, branches, components, and connecting branch ends. 2. It describes how to create these elements, set their specifications, connect them, modify them, check for clashes, and view their positions and details. 3. The document also provides tips for orienting components, changing component routes, and understanding the P point concept.

Uploaded by

SAFIQUL ISLAM
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
28 views

PDMS-Pipework Application

1. The document provides instructions for creating various elements in PDMS Pipework including sites, zones, pipes, branches, components, and connecting branch ends. 2. It describes how to create these elements, set their specifications, connect them, modify them, check for clashes, and view their positions and details. 3. The document also provides tips for orienting components, changing component routes, and understanding the P point concept.

Uploaded by

SAFIQUL ISLAM
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

Pipe work Application

1. Introduce with Pipe Work.


2. How to Create Some Administrative Element. Like SITE, ZONE:
 At first we have to enter into Pipe work Module. To do this click
Design-->Pipe work we will enter into Pipe work Module.
 To Create a SITE click Create-->Site (Selecting World in Member),
Then we will see a window where it have two manus named Name and
Purpose. We have to fill Name & Purpose Field then click OK. A SITE will
be created.
 To Create a ZONE click Create-->Zone (Selecting Site in the
Member), after then all procedure is same as creating a SITE.

3. How to Create A Pipe & Branch with desired Specification:

 When we will create a pipe it will create a branch also.


 To Create A Pipe under a Zone Click Create-->Pipe (Selecting the Zone
under which we want to create Pipe) we will see a window set the Name of
the Pipe in the Name Field. To set a pipe specification click on Specification
Tab at the same window. We will see another window in which there many
specification. We have to select a desired specification, Insulation and
Tracing should be off at primary Stage. Then click ok in the create pipe
menu.

 Then we will have another window ‘Create Branch’. This will allow
choosing the specification for branch. And also to choose the branch creation
option either connect or explicit. If we want to start the branch from any
component then use ‘connect’. And if we want to stand the branch from an
explicit position, then we will use ‘explicit’. After then click OK.

 If we use the ‘connect’ option then we will see a new window named
‘Connect Branch’ in this window we have to define which end (Head end,
Tail end) is connected to which item (Tee, Nozzle etc). Suppose we want to
connect Head end of the Branch to a Nozzle, to do this select Head and
Nozzle from Drop Down Manu then Click Apply all tab at the screen will be
inactive and have to identify the Nozzle at which the Head of the Branch to be
connected. The Tail of the Branch should be connected by this way.

4. How to Create A Branch of a Pipe with Specification:

To do this at first select the pipe under which the Branch will create. Then
click Create-->Branch we will see a window named ‘create Branch’. Set the
name of the Branch, and then select the specification of the Branch. Select
Bangladesh Development and Data Processing Ltd. 1
www.bddp-ltd.com
Training Document : PDMS pipework Application
Connect/Explicit. We have to select Connect, when we want to connect the
Head end or Tail end to the desired item (Tee, Nozzle etc) and select Explicit
when we want to create a Branch at Explicit Position. Then click OK. We will
see a new window, the activities at this window is described earlier (at step 3)

5. Some Idea for Head & Tail, Connect, Explicit etc of a Branch:
A Branch has two ends, Head end & Tail end. We have to select Connect (At
‘Create Branch’ window) when we want to connect the Head end or Tail end
to the desired item (Tee, Nozzle etc) and select Explicit when we want to create
a Branch at Explicit Position. When we select Explicit and click OK then we
will see a new window named ‘Branch at Explicit Position’ select Head from
Drop Down Manu and have to give desired position at that position the Branch
to be started, and we have to select Bore and Direction, then Click Apply &
Dismiss.

6. How to Create Component of a Pipe:

 We have to create some Component between Head & Tail. To do this select the
Branch in which the component to be created then click Create-->Component.
We will see a window Named ‘Piping Component’.
 Specification is specified when the branch is created. Insulation & Tracing is
same as Default.
 There are two options Forward/Backward. When we want to create
Component from head of the Branch then we have to click on Forward, when
we have to Create Component From Tail then click on Backward.
 Tick Mark on ‘Auto Conn’, then select the desired component that we want to
create, then Click on Create Tab, the component will create.
 The Leave Direction could be changed from Drop Down Manu of ‘Direction’.
The Component could be Rotate at Desired angle from Drop down Menu of
‘Rotate’. The Component could be moved through selected Item, which is
selected, from Drop Down Menu of ‘Thro CE’. Such as if we select ‘Thro ID
Cursor’ then all Tab at the Screen will be inactive then have to select the Item
through which the component to move with Pipe. We can move the component
to the desired distance by Distance or Spool command.

7. How to Create an Angle Between two Components of a Pipe:


Suppose we have to create an angle between Two Elbows (Like one Elbow is at
0,0,0 and another is at 500D & 500N). At first select second Elbow and move it
to 0 (by using through previous) then from command Line move it to the 500D
and 500N, then select the first Elbow and click Orientate-->Component--
>Leave we will see a window (Must be at Forward). Press on CE. Click on
Angle Change and select Toward Next from Drop Down Manu of Direction

Bangladesh Development and Data Processing Ltd. 2


www.bddp-ltd.com
Training Document : PDMS pipework Application
and Apply. Then select Second Elbow (must be at Backward) then apply same
procedure. The Pipe will connect at an angle.

8. How to Modify Pipe & Branch Specifications & Component:


To do this at first select the Pipe who’s Specifications have to Modify, then click
Modify-->Pipe-->Specifications for modify Pipe specifications. To Modify
Branch Specifications, Click Modify-->Branch-->Specifications/Explicit. When
we select Explicit we can change the Explicit Position of the Branch.

9. How to See the Position of a Component:

To see the Position of a component at first select the Component then Click
Position-->Explicit (AT). We can see the Explicit Position at Different Point
(Origin, P Point etc.)

10. How to Orientate of a component (Leave, Arrive etc):

To do this Click Orientate-->Component-->Leave. We will see a window we


can change the Arrive Direction using this window.

11. How to Connect Branch Head & Tail:

To Connect Head or Tail of a Branch Click Connect-->Branch. We will see a


window we can connect Head or Tail of a Branch using this window.

12. How to Check Clashes:


Click Utilities-->Clashes. We will see a window Named ‘Clash Display’. Click
Control-->Check CE then the clash List will show, using this window we can
check clashes.

13. How to See the Detail of a Component (When Creating the


Component):
To see the Detail description of a component when creating the component click
Settings-->Choose Options. We will see a window, Select all from Drop Down
Manu of Selection Criteria then click on Dismiss.

14. How to Change the Route of a Component (Route Though, Branch


off, Split Route):
To change the Route of a Component Click Modify-->Component-->Route. We
will see a window, then choose an option from Drop Down Menu and click
Apply. The Route will be changed. One thing must be remember at this stage, the
Route will be change of that component, which have Multiway, like Tee.

Bangladesh Development and Data Processing Ltd. 3


www.bddp-ltd.com
Training Document : PDMS pipework Application
15. Idea of P Point:

Bangladesh Development and Data Processing Ltd. 4


www.bddp-ltd.com
Training Document : PDMS pipework Application

You might also like