Scribd
Upload
1K views

MS192T, MS192TC Parts Diagrams

This document contains a drawing labeled "Drawing C" showing an oil pump, clutch, and associated parts. It includes a list of 34 reference items describing parts such as an oil pump, clutch shoes, tension springs, sprockets, and screws. The list also indicates quantities of each part and provides part numbers.

Uploaded by

Logan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

MS192T, MS192TC Parts Diagrams

This document contains a drawing labeled "Drawing C" showing an oil pump, clutch, and associated parts. It includes a list of 34 reference items describing parts such as an oil pump, clutch shoes, tension springs, sprockets, and screws. The list also indicates quantities of each part and provides part numbers.

Uploaded by

Logan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 32

Drawing A Cylinder with piston, Ignition system

MS 192 T, MS 192 TC SCS 01-2010 3.29


1
This manual downloaded from http://www.manualowl.com
Drawing A Cylinder with piston, Ignition system

Reference Item number Qty Description

1 1137 020 1203 1 Cylinder with piston Ø 37 mm (1,2)


☐ 3 - 6, 12
2 1137 020 1204 1 Cylinder with piston Ø 37 mm (3,4) With pre-exhaust
groove
☐ 3 - 6, 12
3 1137 030 2002 1 Piston Ø 37 mm
☐ 4 - 6
4 1130 034 3003 2 Piston ring Ø 37x1.2 mm
5 1132 034 1501 1 Piston pin 10x6.5x25
6 9463 650 1000 1 Snap ring 10
7 1137 030 0400 1 Crankshaft (25.2005)
8 1137 036 0300 2 Washer
9 9503 003 0210 2 Grooved ball bearing 6001
10 9639 003 1205 2 Oil seal 12x22x4.5 (02.2005)
10 9639 003 1206 2 Oil seal 12x22x4.5 (02.2005)
11 1137 021 2500 1 Engine pan
12 9075 478 4136 6 Pan head self-tapping screw IS-D5x20
13 1137 140 0600 1 Muffler (1,3)
14 1137 140 0601 1 Muffler (2,4) USA, AUS, CDN
☐ 15 - 17
15 1137 141 9000 1 Screen (2,4) USA, AUS, CDN
16 1137 140 7400 1 Deflecting plate (2,4) USA, AUS, CDN
17 9099 021 0810 1 Self-tapping screw 4.2x9.5 (2,4) USA, AUS, CDN
18 1137 400 1300 1 Ignition module
19 0000 998 0604 1 Torsion spring
20 1128 405 1000 1 Spark plug boot
21 1137 084 1600 1 Cover
22 0000 989 0507 1 Grommet
23 9075 478 3022 2 Pan head self-tapping screw IS-D4x20
24 9291 021 0100 1 Washer 4.3

(1) MS 192 T, (2) MS 192 T-Z, (3) MS 192 TC-E, (4) MS 192 TC-E Z


MS 192 T, MS 192 TC SCS 01-2010 3.29
2
This manual downloaded from http://www.manualowl.com
Drawing A Cylinder with piston, Ignition system

MS 192 T, MS 192 TC SCS 01-2010 3.29


3
This manual downloaded from http://www.manualowl.com
Drawing A Cylinder with piston, Ignition system

Reference Item number Qty Description

25 1137 448 1201 1 Lead retainer


26 0000 400 7000 1 Spark plug NGK BPMR7A
26 1110 400 7005 1 Spark plug Bosch WSR 6 F
27 1137 400 1200 1 Flywheel (25.2005)
28 0000 955 0802 1 Collar nut M8x1
29 0000 951 1100 4 Screw IS-D5x20
30 0783 830 2000 1 Tube of sealant Dirko HT red

(1) MS 192 T, (2) MS 192 T-Z, (3) MS 192 TC-E, (4) MS 192 TC-E Z


MS 192 T, MS 192 TC SCS 01-2010 3.29
2
This manual downloaded from http://www.manualowl.com
Drawing B Engine housing

MS 192 T, MS 192 TC SCS 01-2010 3.29


5
This manual downloaded from http://www.manualowl.com
Drawing B Engine housing

Reference Item number Qty Description

1 1137 020 3001 1 Engine housing


☐ 2 - 9
2 0000 664 2401 1 Collar screw D6
3 1123 664 2400 1 Collar screw
4 1129 352 5500 1 Clamp
5 1128 640 9100 1 Valve
6 1129 647 9400 1 Hose
7 1123 640 3800 1 Pickup body
8 1137 358 7700 1 Hose
9 0000 350 3502 1 Pickup body
10 0000 350 0525 1 Filler cap
☐ 11
11 9645 948 7734 1 O­ring 25x3.5
12 0000 350 0526 1 Filler cap
☐ 13
13 9645 948 2470 1 O­ring 23x3
14 1137 351 4000 1 Insulating plate
15 1137 028 1500 1 Support
16 1137 350 5000 1 Tube
☐ 21
17 1137 358 7701 1 Hose
18 1137 358 7702 1 Hose
19 1 Hose 3.1x5.7x82 mm (D)
0000 930 2803 1 Hose 3.1x5.7 mm x 1 m (A,B)
20 0000 997 2003 1 Compression spring
21 1137 353 2600 2 Elbow connector
22 4130 350 6200 1 Fuel pump
23 0000 350 5802 1 Tank vent
24 1137 790 9900 1 Annular buffer
25 9074 477 2995 2 Pan head self-tapping screw IS-P4x12
26 1129 791 6100 1 Screw
27 1129 352 7700 1 Bracket
28 1129 352 5000 1 Loop
29 9074 478 4435 1 Pan head self-tapping screw IS-P6x19
30 0000 967 3501 1 Instruction label (2,4) USA

31 0000 967 3685 1 Instruction label (1) BR

32 0000 967 3605 1 Warning pictogram Filler cap (2,4) USA, CDN
33 1137
(1) MS 192 T, 021 1101 1(3) MS 192 TC-E,
(2) MS 192 T-Z, Cover (4) MS 192 TC-E Z
MS 192 T, MS 192 TC SCS 01-2010 3.29
6
This manual downloaded from http://www.manualowl.com
Drawing B Engine housing

MS 192 T, MS 192 TC SCS 01-2010 3.29


7
This manual downloaded from http://www.manualowl.com
Drawing B Engine housing

Reference Item number Qty Description

34 1129 967 3403 1 Instruction label

(1) MS 192 T, (2) MS 192 T-Z, (3) MS 192 TC-E, (4) MS 192 TC-E Z


MS 192 T, MS 192 TC SCS 01-2010 3.29
6
This manual downloaded from http://www.manualowl.com
Drawing C Oil pump, Clutch

MS 192 T, MS 192 TC SCS 01-2010 3.29


9
This manual downloaded from http://www.manualowl.com
Drawing C Oil pump, Clutch

Reference Item number Qty Description

1 1137 640 3202 1 Oil pump


☐2
2 1137 647 5701 1 Connector
3 9075 478 3022 1 Pan head self-tapping screw IS-D4x20
4 1137 021 1100 1 Cover
5 9074 477 2995 3 Pan head self-tapping screw IS-P4x12
6 9512 933 2270 1 Needle cage 10x13x13
7 1137 640 2001 1 Chain sprocket 3/8" Picco 6T
8 1129 640 7100 1 Worm 3/8" Picco 6T

1137 007 1002 1 Set of spur sprocket/worm 1/4" 8T

9 1137 640 2002 1 Chain sprocket 1/4" 8T not for USA


10 1129 640 7102 1 Worm 1/4" 8T
11 1137 640 2003 1 Chain sprocket 3/8" Picco 7T (B)
12 1129 640 7101 1 Worm 3/8" Picco 7T (B)
13 1137 160 2000 1 Clutch
☐ 14 - 16
14 1137 162 0800 3 Clutch shoe
15 1121 162 3000 3 Retainer
16 0000 997 5625 3 Tension spring
1129 007 1000 1 Spur gear / chain adjusting screw kit
☐ 17, 18
17 1 Spur gear (D)
18 1 Adjusting screw (D)
19 1129 640 1900 1 Tensioner slide
20 1123 664 1400 1 Thrust pad
21 1123 664 2200 1 Cover
22 9075 478 3015 1 Pan head self-tapping screw IS-D4x15
23 1123 648 6600 2 Bumper strip
24 1129 664 0500 1 Bumper spike (B)
25 9074 477 4130 2 Pan head self-tapping screw IS-P5x16 (B)
26 1129 656 7701 1 Chain catcher (B)

(1) MS 192 T, (2) MS 192 T-Z, (3) MS 192 TC-E, (4) MS 192 TC-E Z


MS 192 T, MS 192 TC SCS 01-2010 3.29
10
This manual downloaded from http://www.manualowl.com
Drawing D Chain sprocket cover

MS 192 T, MS 192 TC SCS 01-2010 3.29


11
This manual downloaded from http://www.manualowl.com
Drawing D Chain sprocket cover

Reference Item number Qty Description

1137 640 1700 1 Chain sprocket cover


☐ 1 - 14
1 1137 640 1701 1 Chain sprocket cover
☐ 2 - 4
2 1120 162 5200 1 Pin
3 9378 543 2700 1 Notched pin 5x30
4 1129 640 5000 1 Insert
5 1128 160 5000 1 Lever
6 9460 624 0400 1 E-clip 4
7 1129 162 7800 1 Flat spring
8 1137 160 5502 1 Tension spring
☐9
9 1137 162 6600 1 Limit stop
10 1123 160 5400 1 Brake band
11 1137 648 7700 1 Cover
12 9074 477 2995 2 Pan head self-tapping screw IS-P4x12
13 1123 648 6600 1 Bumper strip
14 1137 792 9100 1 Hand guard
15 0000 967 3724 1 Instruction label (2,4) USA
16 0000 955 0801 1 Hexagon nut M8

(1) MS 192 T, (2) MS 192 T-Z, (3) MS 192 TC-E, (4) MS 192 TC-E Z


MS 192 T, MS 192 TC SCS 01-2010 3.29
12
This manual downloaded from http://www.manualowl.com
Drawing E Rewind starter

MS 192 T, MS 192 TC SCS 01-2010 3.29


13
This manual downloaded from http://www.manualowl.com
Drawing E Rewind starter

Reference Item number Qty Description

1137 080 2100 1 Fan housing with rewind starter (1,2)


☐ 1 - 12
1 1137 080 1800 1 Fan housing (1,2)
☐ 2, 3
2 1110 084 9102 1 Bushing (1,2)

3 9104 003 2960 1 Self-tapping screw P4x10 (1,2)

4 1123 190 0600 1 Rewind spring (1,2)


5 1123 195 0400 1 Rope rotor (1,2)
6 1125 195 7200 1 Pawl (1,2)
7 0000 958 0923 1 Washer (1,2)
8 1118 195 3500 1 Spring (1,2)
9 1121 195 3400 1 Starter grip (1,2)
10 0000 195 8200 1 Starter rope Ø 3x800 mm (1,2)
11 1137 967 1500 1 Model plate MS 192 T (1,2)
12 1137 084 7800 1 Segment (1,2)
13 9074 477 4130 4 Pan head self-tapping screw IS-P5x16 (1,2)
14 0000 190 3402 1 Starter grip ElastoStart Ø 3 mm (B) (1,2)
☐ 10, 15
15 0000 195 7001 1 Cap (B) (1,2)

(1) MS 192 T, (2) MS 192 T-Z, (3) MS 192 TC-E, (4) MS 192 TC-E Z


MS 192 T, MS 192 TC SCS 01-2010 3.29
14
This manual downloaded from http://www.manualowl.com
Drawing F Rewind starter ErgoStart/Easy2Start

MS 192 T, MS 192 TC SCS 01-2010 3.29


15
This manual downloaded from http://www.manualowl.com
Drawing F Rewind starter ErgoStart/Easy2Start

Reference Item number Qty Description

1137 080 2105 1 Fan housing with rewind starter (3,4)


☐ 1 - 14
1 1137 080 1801 1 Fan housing (3,4)
☐ 2, 3
2 1110 084 9102 1 Bushing (3,4)

3 9104 003 2960 1 Self-tapping screw P4x10 (3,4)

4 1123 190 0600 1 Rewind spring (3,4)


5 1137 190 1000 1 Rope rotor (3,4)
☐ 6 - 8
6 1137 195 3501 1 Spring (3,4)

7 0000 958 1020 1 Washer (3,4)

8 1 Carrier (D) (3,4)


9 1123 195 7200 2 Pawl (3,4)
10 0000 958 0923 1 Washer (3,4)
11 1128 195 3500 1 Spring (3,4)
12 1137 084 7800 1 Segment (3,4)
13 1121 195 3400 1 Starter grip (3,4)
14 0000 195 8204 1 Starter rope Ø 2.7x800 mm (3,4)
15 1137 967 1503 1 Model plate MS 192 TC (3,4)
16 9074 477 4130 4 Pan head self-tapping screw IS-P5x16 (3,4)

(1) MS 192 T, (2) MS 192 T-Z, (3) MS 192 TC-E, (4) MS 192 TC-E Z


MS 192 T, MS 192 TC SCS 01-2010 3.29
16
This manual downloaded from http://www.manualowl.com
Drawing G Handle housing

MS 192 T, MS 192 TC SCS 01-2010 3.29


17
This manual downloaded from http://www.manualowl.com
Drawing G Handle housing

Reference Item number Qty Description

1137 790 1001 1 Handle housing (1,2)


☐ 1-5, 7-18, 20, 21

1137 790 1004 1 Handle housing (3,4)


☐ 1-4, 6-18, 20, 21

1 1137 790 1000 1 Handle housing


☐2
2 1121 122 6600 2 Collar screw
3 9074 478 4435 1 Pan head self-tapping screw IS-P6x19
4 1 Contact spring (D) (21.2008)
5 1137 791 1700 1 Handlebar (1,2)

6 1137 791 1702 1 Handlebar (3,4)

7 1137 180 0950 1 Switch shaft (21.2008)


☐4
8 1137 182 0800 1 Trigger interlock
9 1129 182 4500 1 Torsion spring
10 1132 180 1500 1 Throttle trigger
11 1129 180 4000 1 Double lever
12 1129 182 1501 1 Throttle rod
13 1137 791 0600 1 Handle molding
14 9074 477 2995 3 Pan head self-tapping screw IS-P4x12
15 1137 440 3000 1 Wiring harness
☐ 16 - 19
16 0751 030 8950 1 Terminal socket A 4-1
17 0751 030 8953 1 Terminal socket 4.8-1
18 0000 989 0507 4 Grommet
19 1137 448 1200 1 Lead retainer
20 9074 477 4130 1 Pan head self-tapping screw IS-P5x16
21 1137 790 8300 1 AV-Spring
22 1137 182 1500 1 Throttle rod
23 1137 791 3101 1 Spring
24 1137 792 2902 1 Bearing plug
25 9074 477 4130 2 Pan head self-tapping screw IS-P5x16

26 0781 120 1109 1 Gear lubricant 80 g (B) (21.2008)

(1) MS 192 T, (2) MS 192 T-Z, (3) MS 192 TC-E, (4) MS 192 TC-E Z


MS 192 T, MS 192 TC SCS 01-2010 3.29
18
This manual downloaded from http://www.manualowl.com
Drawing H Air filter

MS 192 T, MS 192 TC SCS 01-2010 3.29


19
This manual downloaded from http://www.manualowl.com
Drawing H Air filter

Reference Item number Qty Description

1 1137 120 3400 1 Filter base


☐ 2, 3
2 9416 868 6531 2 Hollow rivet 6.5x0.5x6.8
3 9645 945 7444 1 O-ring 4x1.5
4 9216 261 0700 2 Hexagon nut M5
5 1129 122 0100 1 Foam insert
6 1137 120 1600 1 Air filter, fleece
7 1137 120 1601 1 Air filter
8 1137 140 1900 1 Carburetor box cover
☐9
9 1137 140 9200 1 Twist lock
10 1137 141 3300 1 Supporting plate

11 1137 141 2201 1 Manifold ↦ 271 210 654

12 ✻ 1137 141 2200 1 Manifold (13.2007)

13 1137 141 1800 1 Sleeve


14 1129 121 8600 1 Washer
15 1137 120 0600 1 Carburetor C1Q-S134
15 1137 120 0602 1 Carburetor C1Q-S135

15 1137 120 0605 1 Carburetor C1Q-S125 BR

16 1137 121 6100 1 Choke lever


17 1137 123 7500 1 Grommet

(1) MS 192 T, (2) MS 192 T-Z, (3) MS 192 TC-E, (4) MS 192 TC-E Z


MS 192 T, MS 192 TC SCS 01-2010 3.29
20
This manual downloaded from http://www.manualowl.com
Drawing J Carburetor C1Q-S134, C1Q-S103

MS 192 T, MS 192 TC SCS 01-2010 3.29


21
This manual downloaded from http://www.manualowl.com
Drawing J Carburetor C1Q-S134, C1Q-S103

Reference Item number Qty Description

1137 120 0600 1 Carburetor C1Q-S134


☐ 1-22,24-35

✻ 1 Carburetor C1Q-S103 (C) (13.2007)


☐ 1-21,23-35

1 1137 121 5400 1 Valve jet


2 4116 121 5100 1 Inlet needle
3 4228 121 5602 1 Fixed jet 0.39
4 1128 122 3000 1 Spring
5 1125 121 5000 1 Inlet control lever
6 1120 121 9200 1 Spindle
7 1120 122 6600 1 Collar screw
8 1129 129 0900 1 Gasket
9 4129 121 4700 1 Metering diaphragm
10 1130 121 0800 1 End cover
11 9646 945 0490 1 O-ring 7x1.5
12 1120 122 6601 4 Collar screw

1137 120 9704 1 Pump piston kit


☐ 13 - 15

✻ 1137 120 9700 1 Pump piston kit (13.2007)


☐ 13 - 15

13 1 Spring (D)
14 1 Sealing ring (D)
15 1 Pump piston (D)
16 1137 121 3300 1 Throttle shutter
17 1125 122 7403 2 Round head screw
18 1137 122 6800 1 Low speed adjustment screw
19 1137 122 6700 1 High speed adjustment screw
20 4229 121 2701 1 Cap
21 1123 122 3000 1 Spring

22 1137 120 7104 1 Throttle shaft with lever

23 ✻ 1137 120 7100 1 Throttle shaft with lever (13.2007)

24 1125
(1) MS 192 T, 122 9001 1(3) MS 192 TC-E,
(2) MS 192 T-Z, E-clip (4) MS 192 TC-E Z
MS 192 T, MS 192 TC SCS 01-2010 3.29
22
This manual downloaded from http://www.manualowl.com
Drawing J Carburetor C1Q-S134, C1Q-S103

MS 192 T, MS 192 TC SCS 01-2010 3.29


23
This manual downloaded from http://www.manualowl.com
Drawing J Carburetor C1Q-S134, C1Q-S103

Reference Item number Qty Description

25 1137 121 3000 1 Choke shaft


26 1123 121 7800 1 Strainer
27 4119 122 3002 1 Spring
28 4119 122 4200 1 Ball
29 1129 121 2900 1 Choke shutter
30 1129 121 4800 1 Pump diaphragm
31 1123 129 0905 1 Gasket
32 1137 121 0800 1 End cover
33 1125 122 4200 1 Ball
34 4229 122 6200 1 Idle speed adjustment screw
35 1120 122 7800 1 Oval head screw
1129 007 1062 1 Set of carburetor parts
☐ 8, 9, 30, 31

(1) MS 192 T, (2) MS 192 T-Z, (3) MS 192 TC-E, (4) MS 192 TC-E Z


MS 192 T, MS 192 TC SCS 01-2010 3.29
22
This manual downloaded from http://www.manualowl.com
Drawing K Carburetor C1Q-S135, C1Q-S104

MS 192 T, MS 192 TC SCS 01-2010 3.29


25
This manual downloaded from http://www.manualowl.com
Drawing K Carburetor C1Q-S135, C1Q-S104

Reference Item number Qty Description

1137 120 0602 1 Carburetor C1Q-S135


☐ 1-22,24-35

1 Carburetor C1Q-S104 (C) (13.2007)


☐ 1-21,23-35
1 1137 121 5400 1 Valve jet
2 4116 121 5100 1 Inlet needle
3 4228 121 5602 1 Fixed jet 0.39
4 1128 122 3000 1 Spring
5 1125 121 5000 1 Inlet control lever
6 1120 121 9200 1 Spindle
7 1120 122 6600 1 Collar screw
8 1129 129 0900 1 Gasket
9 4129 121 4700 1 Metering diaphragm
10 1130 121 0800 1 End cover
11 9646 945 0490 1 O-ring 7x1.5
12 1120 122 6601 4 Collar screw

1137 120 9704 1 Pump piston kit


☐ 13 - 15

✻ 1137 120 9700 1 Pump piston kit (13.2007)


☐ 13 - 15

13 1 Spring (D)
14 1 Sealing ring (D)
15 1 Pump piston (D)
16 1137 121 3301 1 Throttle shutter
17 1125 122 7403 2 Round head screw
18 4314 122 6801 1 Low speed adjustment screw
19 1137 122 6700 1 High speed adjustment screw
20 4229 121 2701 1 Cap
21 1123 122 3000 1 Spring

22 1137 120 7104 1 Throttle shaft with lever

23 ✻ 1137 120 7100 1 Throttle shaft with lever (13.2007)

24 1125 122 9001 1 E-clip


25 1137
(1) MS 192 T, 121 3000 1(3) MS 192 TC-E,
(2) MS 192 T-Z, Choke shaft (4) MS 192 TC-E Z

MS 192 T, MS 192 TC SCS 01-2010 3.29


26
This manual downloaded from http://www.manualowl.com
Drawing K Carburetor C1Q-S135, C1Q-S104

MS 192 T, MS 192 TC SCS 01-2010 3.29


27
This manual downloaded from http://www.manualowl.com
Drawing K Carburetor C1Q-S135, C1Q-S104

Reference Item number Qty Description

26 1123 121 7800 1 Strainer


27 4119 122 3002 1 Spring
28 4119 122 4200 1 Ball
29 1129 121 2900 1 Choke shutter
30 1129 121 4800 1 Pump diaphragm
31 1123 129 0905 1 Gasket
32 1137 121 0800 1 End cover
33 1125 122 4200 1 Ball
34 4229 122 6200 1 Idle speed adjustment screw
35 1120 122 7800 1 Oval head screw
1129 007 1062 1 Set of carburetor parts
☐ 8, 9, 30, 31

(1) MS 192 T, (2) MS 192 T-Z, (3) MS 192 TC-E, (4) MS 192 TC-E Z


MS 192 T, MS 192 TC SCS 01-2010 3.29
26
This manual downloaded from http://www.manualowl.com
Drawing L Carburetor C1Q-S125 BR

MS 192 T, MS 192 TC SCS 01-2010 3.29


29
This manual downloaded from http://www.manualowl.com
Drawing L Carburetor C1Q-S125 BR

Reference Item number Qty Description

1137 120 0605 1


Carburetor C1Q-S125
☐ 1 - 34
1 1137 121 5400 1 Valve jet
2 4116 121 5100 1 Inlet needle
3 4228 121 5602 1 Fixed jet 0.39
4 1128 122 3000 1 Spring
5 1125 121 5000 1 Inlet control lever
6 1120 121 9200 1 Spindle
7 1120 122 6600 1 Collar screw
8 1129 129 0900 1 Gasket
9 4129 121 4700 1 Metering diaphragm
10 1130 121 0800 1 End cover
11 9646 945 0490 1 O-ring 7x1.5
12 1120 122 6601 4 Collar screw
1137 120 9704 1 Pump piston kit
☐ 13 - 15
13 1 Spring (D)
14 1 Sealing ring (D)
15 1 Pump piston (D)
16 1137 121 3300 1 Throttle shutter
17 1125 122 7403 2 Round head screw
18 1137 122 6800 1 Low speed adjustment screw
19 1137 122 6700 1 High speed adjustment screw
20 4229 121 2701 1 Cap
21 1123 122 3000 1 Spring
22 1137 120 7104 1 Throttle shaft with lever
23 1125 122 9001 1 E-clip
24 1137 121 3000 1 Choke shaft
25 1123 121 7800 1 Strainer
26 4119 122 3002 1 Spring
27 4119 122 4200 1 Ball
28 1129 121 2900 1 Choke shutter
29 1129 121 4800 1 Pump diaphragm
30 1123 129 0905 1 Gasket
31 1137 121 0800 1 End cover
32 1125 122 4200 1 Ball
33 4229 122 6200 1 Idle speed adjustment screw
34 1120 122 7800 1 Oval head screw
1129 007 1062 1 Set of carburetor parts
☐ 8, 9, 29, 30 (4) MS 192 TC-E Z
(1) MS 192 T, (2) MS 192 T-Z, (3) MS 192 TC-E,
MS 192 T, MS 192 TC SCS 01-2010 3.29
30
This manual downloaded from http://www.manualowl.com
Drawing M Tools, Extras

MS 192 T, MS 192 TC SCS 01-2010 3.29


31
This manual downloaded from http://www.manualowl.com
Drawing M Tools, Extras

Reference Item number Qty Description

1 1129 890 3401 1 Combination wrench


2 0000 792 9128 1 Chain scabbard
3 0457 927 0000 1 Tag
4 0000 890 2300 1 Screwdriver

4 0000 890 2305 1 Screwdriver available in Brazil only

5 0000 891 0801 1 Tool roll (B)


6 0000 893 5903 1 Locking strip
7 0812 370 1000 1 Screwdriver T27x120x70

(1) MS 192 T, (2) MS 192 T-Z, (3) MS 192 TC-E, (4) MS 192 TC-E Z


MS 192 T, MS 192 TC SCS 01-2010 3.29
32
This manual downloaded from http://www.manualowl.com

You might also like