GGB-SHB
® APPLICATIONS
Industrial – Earth moving machinery, excavators,
drilling machinery, farming machinery, various
equipment grabs, buckets, grippers, hydraulic cylinder
CASE HARDENED CHARACTERISTICS
STEEL BEARINGS
—Steel bushings ideally suited for lubricated applications
—With plain or grooved sliding layer
—Suitable for grease lubrication
—Low rotation speed with high specific pressure
AVAILABILITY
Bearing forms available in standard dimensions:
Plain cylindrical bushes
Bearing forms made to order: Bearings with various
lubrication grooves, non-standard parts
compliant
RoHS
For questions and assistance, contact a GGB
engineer at: https://www.ggbearings.com/en/contact
GGB-SHB® Data Sheet
REVISION: 002 - August, 2021 1
GGB-SHB® DATASHEET
BEARING PROPERTIES UNITS VALUE
GENERAL
Static N/mm2 300
Maximum load, p
Dynamic N/mm2 150
Tensile strength N/mm2 550
Maximum operating temperature °C 150
Density 7.8
Coefficient of linear 10-6/K 12
thermal expansion
GREASE LUBRICATED
Maximum sliding speed, U m/s 0.1
Maximum pU factor N/mm2 x m/s 1.5
Coefficient of friction, f 0.2
MATING MATERIAL
Bearing surface roughness, Ra μm ≤ 0.8
Bearing surface hardness HRC 58 - 62
OPERATING PERFORMANCE MICROSECTION
Dry Poor
Oil lubricated Good
Grease lubricated Very Good
Steel E410, E470
Water lubricated Not recommended
(20MnV6, AISI A381)
Process fluid lubricated Depending on fluid
acc. to EN 10305
GGB, an Enpro company
For additional product offerings visit:
https://www.ggbearings.com/en/our-products/metal-and-bimetal-bearings/ggb-shb
GGB-SHB® Data Sheet
REVISION: 002 - August, 2021 2
