Bourdon Sensing Pressure Gauges

MODEL : BSPG (Dry Case)

LFBSPG (Liquid Filled Case)
Features
n Compliance to latest EN-837 standard
n Range : (-) 1 to 1600 kg/cm²
n Bourdon in SS316 Ti as standard providing
better mechanical properties guaranteeing
repeatability and accuracy
n Accuracy ± 1% FSD (Standard), ± 0.5% FSD on request
n Unit of measurement - kg/cm², bar,
PSI, kPa, MPa

n Pressure Gauges intended for Process Industries such as Chemicals, Petro-chemicals,

Energy or Gas industry, Food processing, Nuclear etc.
n These pressure gauges have been designed to satisfy requirements to operate in
aggressive environment.

Specifications Table 1
Ref. Standard EN-837 Gauge Bar, kg/cm2 Least count
Dial 100 mm / 150 mm in Aluminium, white background, Vacuum (-)1 to 0 0.02
black markings
Case SS304 / SS316 with bayonet bezel Compound (-)1 to 0.6 0.05
Phenol with screwed bezel (-)1 to 1.5 0.05
Protection IP-68 (IS:13947 part I / IEC:60529) (-)1 to 3 0.10
Window Safety glass (Shatter proof / Toughened glass) (-) 1 to 5 0.10
Bourdon SS316, SS316 Ti, SS316L, Monel (-)1 to 9 0.20
Socket 22mm Square in SS316, SS316 Ti, (-)1 to 15 0.50
SS316L, Monel (-)1 to 24 0.50
Movement SS304, SS316 (-)1 to 39 1.0
Range As per EN 837 (refer table 1) minimum span 0.6
Pressure 0 to 0.6 0.01
kg/cm2, maximum 1600 kg/cm2
Gauge 0 to 1 0.02
Connection 1/2" NPT (M) as standard (other optional)
Accuracy ±1% F SD (0.5% on request) (‘C’ shaped 0 to 1.6 0.05
Over range As per EN 837 Bourdon) 0 to 2.5 0.05
Suitability (-) 20°C to 80°C (service temperature) 0 to 4 0.10
Zero adjustment Micrometer Pointer 0 to 6 0.10
Blow out disc Provided (on top) 0 to 10 0.20
Optional IBR certification 0 to 16 0.50
Maxima pointer 0 to 25 0.50
NACE compliance 0 to 40 1.0
External Knob for zero setting 0 to 60 1.0
Built in Snubber 0 to 100 2.0
Built in Gauge Saver
Liquid filled Case (SS case only) Pressure 0 to 160 5.0
Vacuum Protection Gauge 0 to 250 5.0
Coil type 0 to 400 10.0
Bourdon 0 to 600 10.0
0 to 800 20.0
0 to 1000 20.0
0 to 1600 50.0

For range other then above please contact our design dept.

Under Technical Collaboration with M/s. Gauges Bourdon, U.K.

www.general-gauges.com 3
Ordering Information

MODEL : BSPG / LFBSPG

MOUNTING OPTION
V Bottom Entry, Local Mounting A +/- 0.5% Accuracy
C Back Entry, Local Mounting C Colour band
S Bottom Entry, Surface Mounting CE CE Certificate
P Back Entry, Flush Panel Mounting D Dual Scale
(with front Flange having 3 holes) E External Zero reset
B Back Entry, Flush Panel Mounting (for S4 and S6 case)
(with Bracket from back side) F Flanged process connection **
Y Bottom Entry, 2" Pipe Mounting G Glycerine Filled Case
I IBR
DIAL L Nil
10 - 100 mm 15 - 150 mm M Maxima Pointer
N NACE
O O2 Cleaning
CASE
R 150% over range
PH Phenol
S4 SS304 S Silicone Oil Filled Case
S6 SS316 BB Back Blow out Disk
BS Built in Snubber
BOURDON BG Built in Gauge Saver
S SS316 VP Vacuum Protection
L SS316L SD SS Dial
M Monel
PD Phenolic Dial
T SS316Ti
U Chemical Seal Unit-Refer
SOCKET Catalogue CSU
S SS316 X Accessory - Refer Catalogue ACC
L SS316L
M Monel UNIT
A kg/cm2(g)
T SS316Ti
B Bar(g)
MOVEMENT C PSI(g)
4 - SS304 D kPa(g)
6 - SS316 E mmHg(g)
H MPa(g)
CONNECTION X Please Specify
SIZE TYPE MALE / FEMALE METRIC THREADS
RANGE
6 1/4” NT NPT M Male 18 M - M 18 x 1.5
Refer Table 1
10 3/8” BP BSP F Female 20 M - M 20 x 1.5
15 1/2” BT BSPT 24 M - M 24 x 1.5 F - FLANGED PROCESS CONNECTION **
20 3/4” PF PF 27 M - M 27 x 2 Size Code Rating Code Facing Code
25 1” GS Gas 33 M - M 33 x 2 ½” 15 150# A RF RF
32 1.1/4” NS NPS X X - Any other ¾” 20 300# B FF FF
40 1.1/2” 1” 25 600# C RTJ RTJ
1½” 40 900# D LT LT
** For Flanged Process Connection refer the table (mentioned separately) 2” 50 1500# E LG LG
3” 80 2500# F

The recommendations made in this catalogue are to be used as intended guide. No guarantee of material can be undertaken since other
factors may affect the performance. We reserve the right to change the specifications mentioned in this catalogue without any notice as
improvements & development is a continuous process at General. Responsibility of typographical errors is specifically disclaimed.

4 www.general-gauges.com