CENTRAL PUBLIC WORKS DEPARTME

Delhi Schedule of Rotes

(Vol-1)

0004 Production cost of concrete by batch mix plant

GOVERNMENT OF INDIA
CENTRAL PUBLIC WORKS DEPARTMEN
DELHI SCHEDULE OF RATE
(Vol. 1)
2021
 Hkkjr ljdkj
Government of India
Vinit Kumar Jayaswal
Director General

FOREWORD
Delhi Schedule of Rates published by Central Public Works Department from time to time
a comprehensive and useful technical document for execution of civil works. In addition to
CPWD, this Schedule of Rates is used by many Departments, Institutions, Public Sector
Undertakings, Architects and Builders.
Delhi Schedule of Rates was first published in the year 1931, followed by a number of
revisions/publications from time to time in order to bring it in line with the prevailing
materials, technologies, market rates and implementation of GST. It was revised in 1977,
1981, 1985, 1989, 1993, 1997, 2002, 2007,
2010 (Reprint), 2012, 2013, 2014, 2016 and 2019.
Last edition of Delhi Schedule of Rates was published in the year 2019. Revision of this
DSR has become necessary due to change in wages of labour and prices of materials,
adoption of new construction technologies & materials. These components have been
incorporated in the DSR 2021 by revising DSR 2019.
I wish to place on record the technical input and effective coordination on the part of Shri
D.C.Goel ADG (Tech.), Shri Vinayak Rai CE (CSQ) (Civil) and the sincere efforts put in b
Shri Divakar Agrawal SE (TAS), Shri S.N.Jaiswal EE(TAS), Shri Mukesh Varma Chief
Estimator, Shri Naveenkumar P JE (TAS), Shri Chalapaka Ramaraju JE (TAS) and tea
of officers in CSQ unit in preparation and finalizing the DSR 2021 in a short time.

I am sure that Delhi Schedule of Rates 2021 will be useful to all the engineers and
architects in Building Construction Industry in general and CPWD in particular.
Place: New Delhi (Vinit Kumar Jayaswal)
Date: July 12, 2021 Director General
WORKS DEPARTMENT
hedule of Rotes
(Vol-1)

ENT OF INDIA
WORKS DEPARTMENT
DULE OF RATES
ol. 1)
021
 dsUnzh; yksd fuekZ k foHkkxfuekZ k Hkou] ubZ fnYyh 110011 Central Public Works Department Nirman Bhawan, New Delh

ORD
ublic Works Department from time to time is
t for execution of civil works. In addition to
Departments, Institutions, Public Sector

he year 1931, followed by a number of

to bring it in line with the prevailing
mentation of GST. It was revised in 1977,

19.
lished in the year 2019. Revision of this
wages of labour and prices of materials,
terials. These components have been
2019.
effective coordination on the part of Shri
SQ) (Civil) and the sincere efforts put in by
al EE(TAS), Shri Mukesh Varma Chief
hri Chalapaka Ramaraju JE (TAS) and team
ng the DSR 2021 in a short time.

be useful to all the engineers and

neral and CPWD in particular.
(Vinit Kumar Jayaswal)
Director General
 Hkkjr ljdkj
Government of India
Dharmesh Chandra Goel
Addl. Director General (Tech)

PREFACE
1. Delhi Schedule of Rates popularly called as DSR is updated as 2021 edition and includes existing
items of DSR 2019 with (a) deletion of few items which are not in use now, (b) merger of similar items, an
addition of new items in line with emerging trends in construction Industry.
2. DSR 2021 is based on the prevailing market rates of materials in Delhi as on or just before 01.04.20
The labour rates adopted are as per minimum wages applicable with effect from 01.04.2021 issued by Gov
Delhi/ Govt. of India, whichever is higher.
3. The cost index for DSR 2021 is 105 with reference to CPWD Delhi Plinth Area Rates 2020, having
100 as on 01.04.2020 and cost index as on 01.04.2020 is 101 over CPWD Delhi Plinth Area Rates 2019 ha
base 100.
4. The technical sanctioning authority may decide rates of non-schedule items judiciously based
market rates without adding cost index.
5. This DSR 2021 shall be read along with CPWD specifications 2019 Vol.-I & II with up-to-date cor
slips.
6. The salient Features of DSR 2021are as follows:
6.1 DSR 2021 is bilingual and in two volumes each, however, in case of any discrepancy between Englis
Hindi versions, the English version shall prevail.
6.1.1 The rates of basic materials incorporated in this DSR 2021 are considered for the materials availa
the market conforming to BIS Standards/ CPWD Specifications.
6.1.2 The effect of GST on works contract has been incorporated in all the items.
6.2 Salient Modifications and Changes in Sub Heads:
6.2.1 Concrete Work: Many new items are included and amendments in existing items have been mad
reference to IS 386:2016 based on Recycled Concrete Aggregate (RCA) & Recycled Aggregate (RA). Som
the items with excess/ less cement than specified in the items without limit are deleted and modified items
excess cement upto 10% of the minimum specified cement content in design mix are incorporated.
6.2.2 Reinforced Cement Concrete: Many new items are included and amendments
in existing items have been made with reference to IS 386:2016 based on Recycled Concrete Aggregate (RC
Recycled Aggregate (RA). Some of the items with excess/less cement than specified in the items without lim
deleted and modified items with excess cement upto 10% of the minimum specified cement content in desig
are incorporated.
6.2.3 Cladding Work: Amendment is made in item no. 8.2.2 and new item is made as item no. 8.2.3 bas
different colour of granite stones.
6.2.4 Wood & PVC Work: Items Nos. 9.166 to 9.174 for modular kitchen items are added.
6.2.5 Flooring: The items Nos. 11.41A.1.1 to 11.41A.3.5 for vitrified tiles of different sizes are added. T
amendment has been made in item no. 11.56.1 and new item is incorporated as item no. 11.53.2 based on dif
colour of granite stones.
6.2.6 Roofing: The items Nos. 12.64, 12.65 & 12.66 for Aluminium profile sheets are added.
6.2.7 Finishing: The item No. 13.116 for high gloss / Matt finish melamine clear polish is added.
6.2.8 Repairs to Building: The amendment in existing items nos. 13.93 & 13.94 are made.
6.2.9 Road Work: The amendment has been made in item no. 16.87.1 and new item is incorporated as it
16.87.2 based on different colour of granite stones.
6.2.10 Water Supply: The items Nos. 18.85A, 18.86A, 18.87A, 18.88A, 18.89A,
18.90A, 18.92A, 18.93A, 18.95A, 18.96A, 18.97A, 18.99A, 18.100A,
18.101A, 18.102A, 18.103, 18.104 & 18.105 for stainless steel pipes and fittings of Grade 316L are added. T
amendments are made in nomenclature of item no.
18.8.1 to 18.9.10 as per IS 15778:2007. The amendments are made in nomenclature of item nos. 18.7
18.70.12 with respect to specification and basic rates.
6.2.11 New Technologies and Materials: With a view to give boost to make in India initiative of the
Government, new technology items have been added in New Technologies and Materials sub head. These ne
items are included for a period of two years and then performance shall be reviewed. Following are the item
under this sub head.
1. EPS (Cellular plastic material) block (item no. 26.82)
2. Stamping finish to freshly laid plain/reinforced cement concrete (item no. 26.83).
3. Uni-axial and Bi-Axial woven Polyester Geogrids (item no. 26.84 & 26.85).
4. WPC boards in paneling, Cabinets, Doors, Windows etc. (items no. 26.86 to 26.91).
1. EPS (Cellular plastic material) block (item no. 26.82)
2. Stamping finish to freshly laid plain/reinforced cement concrete (item no. 26.83).
3. Uni-axial and Bi-Axial woven Polyester Geogrids (item no. 26.84 & 26.85).
4. WPC boards in paneling, Cabinets, Doors, Windows etc. (items no. 26.86 to 26.91).

5. Extruded hollow clay/terracotta ventilated rain screen tiles (items no. 26.92 & 26.93).
6. Amendments in existing items nos. 26.1 & 26.3 for bamboowood, item no.
26.22 for densified calcium silicate false ceiling tiles, item no. 26.42, 26.43 &
26.45 for light gauge steel frame work, item no. 26.48 for aluminium formwork for monolithic construction
RCC members are made.
7. Other corrections/modifications of minor nature such as typographical error, deletion of misleading c
etc. have been undertaken.
8. Wholehearted commitment and considerable efforts has gone into the preparation of this edition of D
Schedule of Rates. I convey my deep appreciation and sincere thanks to Shri Vinayk Rai CE(CSQ), Shri Div
Agrawal SE (TAS), Shri S.N. Jaiswal EE (TAS), Shri. Mueksh Varma Chief Estimator (TAS), Shri Akhilesh
Sah Chief Eastimator (TAS), Shri. D.S.Adikari AE, Ms. Anshu Shukla AE(TAS), Shri Chalapaka Ramaraju
JE(TAS), Shri Naveenkumar P JE(TAS), Shri A.K.Jha AD (OL) and his team for translation of DSR- 2021 i
Hindi and other officers and staff of CSQ unit whose names are not mentioned here for the sake of brevity fo
sincere efforts made in the preparation of this document in such a short time. Various individuals, Committe
field units, have immensely contributed with substantial inputs; the CSQ unit is indebted for their support.
9. I convey my gratitude to field offices at Delhi who rose to the occasion and provided sufficient data b
market rates to CSQ office and thus enabled them to come out with this edition of DSR in a short time.
10. Although due care has been taken in bringing out DSR-2021, there is possibility that some errors are
there inadvertently. Error or omission may be brought to the notice of Superintending Engineer (TAS), CPW
Room No. 418A, A-wing, Nirman Bhawan, New Delhi -110011 (Tele fax. 011-23062339).
Suggestions for improvement are welcome.
Dharmesh Chandra Goel ADG(Tech) C
 dsUnzh; yksd fuekZ k foHkkx fuekZ k Hkou] ubZ fnYyh 110011 Central Public Works Department Nirman Bhawan, New Delhi-

E
pdated as 2021 edition and includes existing
not in use now, (b) merger of similar items, and (c)
ction Industry.
materials in Delhi as on or just before 01.04.2021.
le with effect from 01.04.2021 issued by Govt. of

CPWD Delhi Plinth Area Rates 2020, having base

over CPWD Delhi Plinth Area Rates 2019 having

tes of non-schedule items judiciously based on

fications 2019 Vol.-I & II with up-to-date correction

er, in case of any discrepancy between English and

R 2021 are considered for the materials available in

ations.
porated in all the items.

amendments in existing items have been made with

gate (RCA) & Recycled Aggregate (RA). Some of
without limit are deleted and modified items with
ontent in design mix are incorporated.
ncluded and amendments
6 based on Recycled Concrete Aggregate (RCA) &
cement than specified in the items without limit are
e minimum specified cement content in design mix

.2 and new item is made as item no. 8.2.3 based on

modular kitchen items are added.

or vitrified tiles of different sizes are added. The
incorporated as item no. 11.53.2 based on different

uminium profile sheets are added.

finish melamine clear polish is added.
ms nos. 13.93 & 13.94 are made.
no. 16.87.1 and new item is incorporated as item no.

7A, 18.88A, 18.89A,

A, 18.100A,
pipes and fittings of Grade 316L are added. The

are made in nomenclature of item nos. 18.70.11 &

ve boost to make in India initiative of the

echnologies and Materials sub head. These new
nce shall be reviewed. Following are the items added

ncrete (item no. 26.83).

o. 26.84 & 26.85).
(items no. 26.86 to 26.91).
ncrete (item no. 26.83).
o. 26.84 & 26.85).
(items no. 26.86 to 26.91).

s (items no. 26.92 & 26.93).

oowood, item no.
26.42, 26.43 &
inium formwork for monolithic construction on

s typographical error, deletion of misleading content

s gone into the preparation of this edition of Delhi

thanks to Shri Vinayk Rai CE(CSQ), Shri Divakar
Varma Chief Estimator (TAS), Shri Akhileshwar
u Shukla AE(TAS), Shri Chalapaka Ramaraju
L) and his team for translation of DSR- 2021 in
e not mentioned here for the sake of brevity for their
h a short time. Various individuals, Committees and
; the CSQ unit is indebted for their support.
to the occasion and provided sufficient data base of
with this edition of DSR in a short time.
2021, there is possibility that some errors are still
otice of Superintending Engineer (TAS), CPWD,
1 (Tele fax. 011-23062339).
Dharmesh Chandra Goel ADG(Tech) CPWD
SH. No.
A.

0.1

0.2
0004 Production cost of concrete by batch mix plant

0.4
B.

10

11

12

13

14

15

16
17

18

19

20

21

22

23

24

25

26

C.

D.

DELHI SCHEDULE OF RATE

(Vol. 1)
2021
BASIC
RATES
NAME OF SUB-HEAD PAGE No.
BASIC RATES

HIRE CHARGES OF PLANTS & MACHINERY 3

LABOUR 7

MATERIALS 9

CARRIAGE CODES 75
SUB -HEADS

Carriage of Materials 79

Earth Work 89

Mortar 99

Concrete Work 103

Reinforced Cement Concrete 115

Masonry Work 135

Stone Work 145

Cladding Work 153

Wood and PVC Work 165

Steel Work 219

Flooring 229

Roofing 247

Note : For Sub Heads 13 to 26 refer to Vol. 2

Finishing 273

Repairs to Building 291

Dismantling and Demolishing 307

Road Work 317

 Sanitary Installations 345

Water Supply 373

Drainage 431

Pile work 447

Aluminium Work 455

Water Proofing 465

Rain Water Harvesting & Tubewells 477

Conservation of Heritage Buildings 485

Structural Glazing Aluminium Composite Panel 491

New Technologies and Materials 501

CEMENT CONSUMPTION STATEMENT 547

BITUMEN CONSUMPTION STATEMENT 591

DELHI SCHEDULE OF RATES

(Vol. 1)
2021
BASIC
RATES
ES
BASIC RATES
0.1 HIRE CHARGES OF PLANTS & MACHINERY
Note :- These rates are exclusive of GST, contractor’s profit and over heads etc.

Code No. Description

0001 Hire charges of Coaltar Boiler 900 to 1400 litres

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

0004 Production cost of concrete by batch mix plant

0003 Hire charges of Diesel Road Roller - 8 to 10 tonne

0004 Production cost of concrete by batch mix plant
0005 Hire charges of Diesel Truck - 9 tonne (with POL)
0006 Hire charges of Spraying machine including electric charges
0007 Hire charges of Coaltar Sprayer
0008 Hire charges of Barber green, drying, mixing and Asphalt Plant, with
accessories, capacity 30/45 tonne

0009 Pumping charges of concrete including Hire charges of pump, piping work &
accessories etc.

0010 Hire charges of Derrick monkey rope

0011 Hire charges of Pump set of capacity 4000 litres/hour
0012 Vibrator (Needle type 40 mm)
0013 Machine for rubbing of floors
0014 Front end loader capacity 1.00 cum
0015 Hire and running charges of Tripod and Mechanical Winch machine complete
with power unit and accessories

0016 Mastic Cooker

0017 Hire and running charges of tipper
0018 Hire and running charges of loader
0019 Hand Grinder for mirror polish
0020 Hydraulic Excavator (3D) with driver and fuel
0021 Pin vibrator
0022 Surface Vibrator
0023 Hot Bitumen Mixer 0.5 cum i/c hand cart
0024 Hire and running charges of hydraulic piling rig with power unit etc. including
complete accessories and shifting at site

0025 Hire and running charges of light crane

0026 Hire and running charges of bentonite pump

0027 Hire and running charges of vibrating pile driving hammer complete with power
unit and accessories

0028 Hire and running charges of crane 20 tonne capacity

0029 Carriage of ready mixed concrete by rotatory transit mixer
0030 Generator 250 KVA
0031 Steam curing by using boiler /Heater
0032 Stressing Machine (jack with pump)
0033 Paint applicator
0034 Cutting saw machine
0035 Strands Roller machinery for laying strands
0036 Bed master (Pulling strands)
0037 Mobile crane
0038 Tractor with ripper attachment
0039 Tractor with trolley
0040 Air compressor 250 cfm with two leads for pneumatic cutters / hammers

0041 Joint cutting machine with 2-3 blades

0042 C.C .batch mix plant
0043 Road sweeper
0044 Cost for crane upto 40 tonne capacity
0045 Slip form paver with sensor
0046 Water tanker 5000 litre
0047 Concrete joint cutting machine
0048 Texturing machine
0049 Dozer D-80-A 12
0050 Motor Grader 3.35 metre blade
0051 Hydraulic Excavator of 1 cum bucket
0052 Front end loader 1 cum bucket capacity (incl POL)
0053 Tipper-5 Cum/10 tonnes
0054 Vibratory roller 8 to 10 tonne

0055 Smooth Wheeled Roller 8 to 10 tonne

0056 Tandem Road Roller
0057 Water Tanker 5 to 6 KL capacity
0058 Air compressor
0059 Wet Mix Plant 60 TPH
0060 Mechanical Broom Hydraulic
0061 Emulsion Pressure Distributor of capacity 1750 sqm per hour
0062 Hot mix Plant -120 TPH capacity
0063 Hot mix Plant 100 TPH Capacity
0064 Paver finisher Hydrostatic with sensor control 100 TPH
0065 Paver finisher Mechanical 100 TPH
0066 Batching and Mixing Plant @ 75 cum per hour
0067 Cost for crane upto 80 tonne capacity
0068 Concrete Paver finisher with 40 HP Motor and sensor
0069 Generator 250 KVA
0070 Generator 100 KVA/125 KVA
0071 Truck 5.5 cum/10 tonnes
0072 Cost for crane having capacity 50MT
0075 Road sweeper (Mechamical Broom) @ 1250 sqm per hour
0076 Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual output

0080 Hire and running charges of drill machine up to 400 mm dia (including cost of
mobile oil, diesel consumption in ordinary soil and operator)

0081 Pile Integrity testing equipment

0082 Excavation of Diaphragm wall by Mechanical Grab
0083 Hire charges of TATA 407 or equivalent for local shifting.
Note :- 1. Above hire - charges (from item code 0001 to 0083) include cost
of services of operating staff, Cost of lubricating oil, diesel / Petrol/
Kerosene oil , other consumables for running the plant and machinery
and excluding GST. 2. The hire charges of plant machinery on per day
basis are for single shift of eight working hours.

0084 Hire charges of diesel truck - 9 tonne (witout POL)

0085 Using cost of Ultra Violet Radiation tube

0086 Compressor, gun, rubber pipes & other accessories- hire charge of plant &
machinery i/c necessary fuel

0087 Hire Charges of Suction Jeting machine 2200 PSI machine i/c POL and operator

0088 Hire charges of Drill machine upto 30 mm dia

0089 Hire charges of sand blasting equipment
0090 Hire charges of compressor
0091 Welding charges of shear key to existing reinforcement
0092 Hire charges of plant and Machinery that can inject 350 kg/day
0093 Hire Charges of Suction Jeting machine 1500 PSI machine i/c POL
and operator
ds etc.

Unit Basic rate as

on or just
before
01.04.2021

day 800.00

day 800.00
day 3000.00
cum 400.00
day 3940.00
day 250.00
day 350.00

day 7700.00

cum 210.00

day 750.00
day 700.00
day 350.00
day 300.00
day 6000.00

day 3000.00

day 750.00
day 3750.00
day 6000.00
day 250.00
day 7000.00
day 250.00
day 300.00
day 3500.00

day 35000.00

day 3500.00

day 3000.00
 day 30000.00

day 7000.00
km/cum 37.30
day 3000.00
cum 500.00
day 11500.00
day 800.00
day 1350.00
day 3500.00
day 3000.00
day 4500.00
day 1200.00
day 1200.00

day 1600.00

day 800.00
day 10000.00
day 550.00
day 8000.00
day 13000.00
day 1200.00
day 600.00
day 925.00
hour 1500.00
hour 2400.00
hour 800.00
hour 1300.00
tonne/km 3.30
hour 600.00

hour 300.00
hour 1200.00
hour 200.00
hour 200.00
hour 950.00
hour 450.00
hour 700.00
 hour 15000.00
hour 13000.00
hour 1500.00
hour 800.00
hour 2400.00
day 15000.00
hour 3000.00
hour 400.00
hour 300.00
tonne km 3.30
day 8500.00
hour 450.00

hour 12000.00

day 7500.00
day 3000.00
sqm 1500.00
day 1400.00

day 2000.00

Hour 190.00

day 4000.00

day 40000.00

day 160.00
day 400.00
day 500.00
each 5.00
day 200.00

day 10000.00
 BASIC RATES
0.2 LABOUR
Note:- These rates are exclusive of GST, contractor’s profit and over heads and are inclusive of wages for
day of rest.

Code No. Description

0100 Bandhani

Bhisti
0004 Production cost of concrete by batch mix plant

0102 Blacksmith 1st class

0103 Blacksmith 2nd class
0111 Carpenter 1st class
0112 Carpenter 2nd class
0113 Chowkidar
0114 Beldar
0115 Coolie
0116 Fitter (grade 1)
0117 Assistant Fitter or 2nd class Fitter
0119 Glazier
0122 Mason (for plaster of paris work) 1st class
0123 Mason (brick layer) 1st class
0124 Mason (brick layer) 2nd class
0125 Mason (for plain stone work) 2nd class
0126 Mason (for ornamental stone work) 1st class
0127 Driver for (Road roller, concrete mixer, Trucks etc.)
0128 Mate
0129 Sewer man
0130 Mistry
0131 Painter
0132 Rock Excavator
0133 Rock Breaker
0134 Rock Hole Driller
0135 Stone Chiseller
0138 Sprayer (for bitumen, tar etc.)
s and are inclusive of wages for weekly

Unit Basic rate as on or

just before

01.04.2021

day 714.00

day 714.00
day 784.00
day 714.00
day 784.00
day 714.00
day 645.00
day 645.00
day 645.00
day 784.00
day 714.00
day 714.00
day 784.00
day 784.00
day 714.00
day 714.00
day 784.00
day 784.00
day 714.00
day 645.00
day 784.00
day 714.00
day 645.00
day 645.00
day 645.00
day 714.00
day 714.00
Code No. Description

0139 Skilled Beldar (for floor rubbing etc.)

0141 White Washer

Nozzel man/ gun man
0004 Production cost of concrete by batch mix plant

0155* Mason (average)

0156* Carpenter (average)
0157 Operator (Pile/ Special machine)
0159 Skilled torch operator for laying tack
0160 Technician
0161 Helper (Technician)
0162 Labour for fabrication of uPVC extruded casement/ sliding windows and doors
including drilling holes, fixing of fittings & hardwares, hire charges of drill
machine and electricity charges etc.

0163 Labour for installation of uPVC extruded casement/ sliding windows and doors
including scaffolding

0164 Security guard without gun (8 hours shift duty per day)
0165 Security guard with gun (8 hours shift duty per day)
0166 Installation charges for fixing of façade at all heights with extruded hollow
clay/terracotta ventillated rain screen tiles

0167 Polisher 1st class

0168 Polisher 2nd class
0169 Specialized technicians
*Note:These rates are average of 1st class and 2nd class
catogories.These are for use in the analysis of rates only.
Unit Basic rate as
on or just
before
01.04.2021

day 714.00

day 714.00
day 784.00
day 749.00
day 749.00
day 784.00
day 784.00
day 853.00
day 645.00

sqm 534.00

sqm 773.00

day 784.00
day 853.00

sqm 645.00

day 784.00
day 714.00
day 853.00
 BASIC RATES
0.3 MATERIALS
Note:- These rates are exclusive of GST, contractor’s profit and over heads and carriage etc.

Code No. Description

0222 Seam bolts and nuts 6 mm dia and 25 mm long

Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated
0004 Production cost of concrete by batch mix plant

sheet 6 mm thick
0224 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement close fitting
adjustable ridge
0225 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement corrugate
serrated adjustable ridge
0226 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement plain wing
adjustable ridge
0227 Fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for
hips
0228 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated
apron piece
0229 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement eaves filler
piece
0230 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement north light
curves
0231 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement ventilator
curves
0232 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement barge boards
boards 6 mm thick
0233 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement ridge finial

0234 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement special north
light curves
0235 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement S type louvers

0236 Multi purpose fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
board 6 mm thick
0237 Multi purpose fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
board 8 mm thick
0238 6 mm thick heavy duty fiber cement board
0239 8mm thick heavy duty fiber cement board
0240 9 mm thick heavy duty fiber cement board
0241 12.5 mm thick Gypsum plaster board
0242 6 mm thick mulitipurpose cement bonded wood particle board conforming to IS :
14276
0243 8 mm thick mulitipurpose cement bonded wood particle board conforming to IS :
14276
0244 Factory made light weight composite non asbestos fibre reinforced aerated cement
sandwitched wall/roof panel (50mm thick). The outer face on both sides of the panels will
be non asbestos fibre cement board (minimum 4mm thick) confirming to IS
14862:2000

0245 Factory made light weight non asbestos fibre reinforced aerated cement sandwitched
wall/roof panel (75mm thick). The outer face on both sides of the panels will be non
asbestos fibre cement board

(minimum 5mm thick) confirming to IS 14862:2000

0246 2mm thick sim pad
0247 5mm thick sim pad
0248 10mm thick sim pad
0249 10 mm thick Cement Bonded particle board confirming to IS 14276
0278 Manufactured sand derived from Recycled Concrete Aggregate (RCA)
0279 Recycled Concrete Aggregate (RCA) 20 mm nominal size
0280 Recycled Concrete Aggregate (RCA) 12.5 mm nominal size
0281 Recycled Concrete Aggregate (RCA) 10 mm nominal size
0282 Recycled Aggregate (RA) 40 mm nominal size
0283 Recycled Aggregate (RA) 20 mm nominal size
0284 Recycled Aggregate (RA) 10 mm nominal size
0285 Brick Aggregate (Single size) : 63 mm nominal size
0286 Brick Aggregate (Single size) : 50 mm nominal size
0287 Brick Aggregate (Single size) : 40 mm nominal size
0291 Stone Aggregate (Single size) : 63 mm nominal size
0292 Stone Aggregate (Single size) : 50 mm nominal size
0293 Stone Aggregate (Single size) : 40 mm nominal size
0294 Stone Aggregate (Single size) : 25 mm nominal size
0295 Stone Aggregate (Single size) : 20 mm nominal size
0296 Stone Aggregate (Single size) : 12.5 mm nominal size
0297 Stone Aggregate (Single size) : 10 mm nominal size
0298 Stone Aggregate (Single size) : 06 mm nominal size
0302 Safeda ballies 125 mm diameter
0303 Cowdung
0304 Bajri
0305 Bamboo 25 mm dia 2.5 metre long
0308 Bhusa
0309 Paving bitumen of grade VG-10 of approved quality
0310 Bitumen emulsion
0312 Bitumen grade PMB - 40
0313 Blown type petroleum bitumen of penetration 85/25 of approved quality
0314 Bitumen hot sealing compound : grade A
0316 Bitumen solution primer of approved quality
0317 Premoulded joint filler 12 mm thick
0318 Bitumen felt fibre base (vegetable or animal):As per IS 7193 Grade I
0319 Bitumen felt as per IS 7193 Grade II
0322 Bitumen felt :Type 3 grade 1
0323 Separation Membrane of impermeable plastic sheeting 125 micron thick
0324 Coal Tar
0325 Blasting powder
0326 Blasting fuse (fuse wire)
0328 White face insulating board: 12 mm thick
0332 Natural colour insulating board: 12 mm thick

0336 Flame retardant face insulating board: 12 mm thick

0339 Flame retardant face insulating, Impregnated fibre board 12 mm thick
0341 Flat pressed 3 layer particle board (medium density) Grade 1, 12 mm thick

0346 Extra for veneered particle board with Teak veneering on one side and commercial
veneering on other side
0347 Extra for veneered particle board with Commercial veneering on both sides

0348 Extra for veneered particle board with Teak veneering on both sides
0349 Curing compound
0351 Integral crystalline slurry
0352 Integral crystalline admixture
0353 Crystalline mortar
0354 Integral crystalline dry shake
0355 Swellable type water stop tape
0356 Primer for swellable type water stop tape
0357 Polymer modified adhesive mortar
0362 Brick bats
0364 Wire brush
0365 Soft brush
0367 Portland Cement (OPC-43 Grade)
0368 White Cement
0369 Plastic sheet,1.25 mm thick for dowel bars
0370 Coal (steam)
0371 Sealant primer
0373 Cramp Gun metal 25x6x300 mm
0374 Pre moulded Joint filler, 25 mm thick for expansion joint.
0378 Brass butt hinges (light/ordinary type) : 125x70x4 mm
0379 Brass butt hinges (light/ordinary type) : 100x70x4 mm
0380 Brass butt hinges (light/ordinary type) : 75x40x2.5 mm
0381 Brass butt hinges (light/ordinary type) : 50x40x2.5 mm
0382 Brass butt hinges (heavy type) : 125x85x5.5 mm(0.70 kg)
0383 Brass butt hinges (heavy type) : 100x85x5.5 mm(0.56 kg)
0384 Brass butt hinges (heavy type) :75x65x4.0 mm (weighing not less than 0.20 kg)

0385 Brass parliamentary hinges 150x125x27x5 mm

0386 Brass parliamentary hinges 125x125x27x5 mm
0387 Brass parliamentary hinges 100x125x27x5 mm
0388 Brass parliamentary hinges 75x100x20x3.2 mm
0389 Brass single acting spring hinges 150 mm
0390 Brass single acting spring hinges 125 mm
0391 Brass single acting spring hinges 100 mm
0392 Brass double acting spring hinges 150 mm
0393 Brass double acting spring hinges 125 mm
0394 Brass double acting spring hinges 100 mm
0400 Brass tower bolt (barrel type) 250x10 mm

0401 Brass tower bolt (barrel type) 200x10 mm

0402 Brass tower bolt (barrel type) 150x10 mm
0403 Brass tower bolt (barrel type) 100x10 mm
0404 Brass flush bolt 250 mm
0405 Brass flush bolt 150 mm
0406 Brass flush bolt 100 mm
0408 Brass handles 125 mm with plate 175x32 mm
0409 Brass handles 100 mm with plate 150x32 mm
0410 Brass handles 75 mm with plate 125x32 mm
0411 Brass door latch 300x16x5 mmweighing not less than 0.380 kg
0412 Brass door latch 250x16x5 mm weighing not less than 0.350 kg
0413 Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles

0414 Brass mortice latch 100x65mm with a pair of brass lever handles
0417 Brass 150 mm floor door stopper weighing not less than 0.357kg
0418 Brass hard drawn hooks and eyes 300 mm
0419 Brass hard drawn hooks and eyes 250 mm
0420 Brass hard drawn hooks and eyes 200 mm
0421 Brass hard drawn hooks and eyes 150 mm
0422 Brass hard drawn hooks and eyes 100 mm
0423 Brass casement window fastener
0424 Brass casement stays (straight peg type) 300 mm weighing not less than 0.33 kg

0425 Brass casement stays (straight peg type) 250 mm weighing not less than 0.28 kg

0426 Brass casement stays (straight peg type) 200 mm weighing not less than 0.24 kg

0427 Brass quadrant stays 300 mm

0428 Brass fanlight catch
0429 Brass fanlight pivot
0430 Brass chain with hook for fan light catch
0431 Brass hasps and staples (safety type) 150 mm
0432 Brass hasps and staples (safety type) 115 mm
0433 Brass hasps and staples (safety type) 90 mm
0438 Brass night latch
0442 Brass helical spring 150 mm
0444 Brass curtain rod 20 mm dia 1.25 mm thick
0445 Brass curtain rod 25 mm dia 1.25 mm thick
0446 Brass brackets (curtain rods) 20 mm
0447 Brass cupboard knob or wardrobe knob 50 mm
0449 Brass screws 50 mm
0450 Brass screws 40 mm
0451 Brass screws 30 mm
0452 Brass screws 25 mm
0453 Brass screws 20 mm
ds and carriage etc.

Unit Basic rate as

on or just
before
01.04.2021

10 Nos 10.00

sqm 225.00

metre 210.00

metre 210.00

metre 210.00

metre 210.00

metre 200.00

each 175.00

metre 280.00

each 310.00

metre 400.00

pair 165.00

each 555.00

each 260.00

sqm 210.00

sqm 220.00

sqm 470.00
sqm 300.00
sqm 625.00
sqm 170.00

sqm 195.00

sqm 215.00
sqm 634.00

sqm 789.00
each 10.00
each 15.00
each 25.00
sqm 475.00
cum 741.00
cum 957.00
cum 957.00
cum 957.00
cum 367.00
cum 398.00
cum 430.00
cum 650.00
cum 650.00
cum 650.00
cum 1000.00
cum 1000.00
cum 1300.00
cum 1350.00
cum 1400.00
cum 1350.00
cum 1350.00
cum 1400.00
metre 40.00
cum 250.00
cum 1000.00
score 400.00
quintal 500.00
tonne 25614.00
tonne 30800.00
tonne 32950.00
tonne 34790.00
kg 29.00
litre 47.00
sqm 360.00
sqm 70.00
sqm 80.00
sqm 70.00
sqm 12.00
litre 30.00
kg 40.00
each 15.00
sqm 235.00
sqm 210.00

sqm 320.00
 sqm 375.00

sqm 288.00

sqm 230.00

sqm 155.00

sqm 500.00
litre 38.00
kg 195.00
kg 230.00
kg 190.00
kg 280.00
metre 325.00
litre 1300.00
kg 14.00
cum 450.00
each 20.00
each 20.00
tonne 5000.00
tonne 11200.00
sqm 25.00
quintal 440.00
kg 130.00
each 80.00
sqm 400.00
10 Nos 775.00
10 Nos 625.00
10 Nos 380.00
10 Nos 155.00
10 Nos 1309.00
10 Nos 997.00

10 Nos 838.00

10 Nos 2610.00
10 Nos 2300.00
10 Nos 2090.00
10 Nos 1870.00
each 425.00
each 285.00
each 250.00
each 480.00
each 400.00
each 390.00
each 257.00

each 205.00
each 154.00
each 103.00
each 150.00
each 130.00
each 90.00
each 144.00
 each 133.00
each 103.00
each 185.00
each 175.00

each 400.00

each 310.00
each 160.00
10 Nos 600.00
10 Nos 574.00
10 Nos 510.00
10 Nos 400.00
10 Nos 345.00
each 45.00

each 126.00

each 100.00

each 95.00

each 110.00
10 Nos 170.00
10 Nos 168.00
each 36.00
10 Nos 740.00
10 Nos 670.00
10 Nos 575.00
each 610.00
each 290.00
metre 140.00
metre 190.00
each 45.00
each 36.00
100 Nos 220.00
100 Nos 170.00
100 Nos 140.00
100 Nos 100.00
100 Nos 95.00
0454 Stainless steel SS grade 304 , curtain rod 20 mm dia 1.20mm thick

0004
0455 Stainless steel SS grade 304, curtain rod 25 mm dia 1.20mm thick
Production
0456 Stainless steel SS grade 304, brackets ( curtain rod) 20 mm dia
cost of 1.20mm thick
concrete by
0457
batch mix Stainless steel SS grade 304, brackets ( curtain rod) 25 mm dia
plant 1.20mm thick
0458 plastic sleeves for screw
0524 Chromium plated Brass butt hinges (heavy) type 75x65x4 mm weighing not less than
200gms
0525 Chromium plated Brass butt hinges (light/ordinary) type 125x70x4mm
0526 Chromium plated Brass butt hinges (light/ordinary) type 100x70x4 mm
0527 Chromium plated Brass butt hinges (light/ordinary) type 75x40x2.5 mm
0528 Chromium plated Brass butt hinges (light/ordinary) type 50x40x2.5 mm
0552 75mm SS fancy handles for kitchen cabinet
0553 100mm SS fancy handles for kitchen cabinet
0554 125mm SS fancy handles for kitchen cabinet
0555 Chromium plated Brass handles 125 mm with plate 175 x32 mm
0556 Chromium plated Brass handles 100 mm with plate 150 x 32 mm
0557 Chromium plated Brass handles 75mm with plate 125x32 mm
0558 Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a pair of
brass lever handles
0568 Chromium plated brass casement window fastener
0569 Chromium plated Brass casement stays (straight peg type) 300 mm weighing not
less than 0.33 kg
0570 Chromium plated Brass casement stays (straight peg type) 250 mm weighing not
less than 0.28 kg
0571 Chromium plated Brass casement stays (straight peg type) 200 mm weighing not
less than 0.24 kg
0583 Chromium plated Brass Night latch
0584 Chromium plated Brass Wardrobe Knob 50 mm
0585 Chromium plated Brass screws 50 mm
0586 Chromium plated Brass screws 40 mm
0587 Chromium plated Brass screws 30 mm
0588 Chromium plated Brass screws 25 mm
0589 Chromium plated Brass screws 20 mm
0590 Chromium plated Brass curtain rod 12 mm dia 1.25mm thick
0591 Chromium plated Brass curtain rod 20 mm dia 1.25mm thick
0592 Chromium plated Brass curtain rod 25 mm dia 1.25mm thick
0593 C.P. Brass Extension Nipple (1/2"x2" size)
0594 Bright finished or black enameled mild steel butt hinges 125x65x
2.12 mm
0595 Bright finished or black enameled mild steel butt hinges 100x58x
1.90 mm
0596 Bright finished or black enameled mild steel butt hinges 75x47x
1.70 mm
0597 Bright finished or black enameled mild steel butt hinges 50x37x
1.50 mm
 metre 125.00

metre 170.00

each 46.00

each 55.00
each 2.00

10 Nos 905.00

10 Nos 805.00
10 Nos 690.00
10 Nos 421.00
10 Nos 180.00
10 Nos. 255.00
10 Nos 455.00
10 Nos 640.00
each 160.00
each 140.00
each 125.00

each 470.00

each 90.00

each 140.00

each 120.00

each 100.00

each 500.00
each 80.00
100 Nos 300.00
100 Nos 290.00
100 Nos 240.00
100 Nos 180.00
100 Nos 160.00
metre 185.00
metre 260.00
metre 340.00
each 40.00

10 Nos 135.00

10 Nos 80.00

10 Nos 56.00

10 Nos 49.00
0608 Nickel plated bright finished mild steel piano hinges 1 mm thick

25 mm wide
0635 Bright finished or black enameled mild steel screws 50 mm
0637 Bright finished or black enameled mild steel screws 40 mm
Bright finished or black enameled mild steel screws 30 mm
0004 Production cost of concrete by batch mix plant

0639 Bright finished or black enameled mild steel screws 25 mm

0640 Bright finished or black enameled mild steel screws 20 mm
0641 Bright finished or black enameled mild steel bolts and nuts 50x6 mm
0642 Oxidised mild steel butt hinges 125x65x2.12 mm
0643 Oxidised mild steel butt hinges 100x58x1.90 mm
0644 Oxidised mild steel butt hinges 75x47x1.70 mm
0645 Oxidised mild steel butt hinges 50x37x1.50 mm
0646 Oxidised mild steel parliamentary hinges 150x125x27x2.8 mm
0647 Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm
0648 Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm
0649 Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm
0650 Oxidised mild steel single acting spring hinges 150 mm
0651 Oxidised mild steel single acting spring hinges 125 mm
0652 Oxidised mild steel single acting spring hinges 100 mm
0653 Oxidised mild steel double acting spring hinges 150 mm
0654 Oxidised mild steel double acting spring hinges 125 mm
0655 Oxidised mild steel double acting spring hinges 100 mm
0656 Nickel plated mild steel piano hinges 1 mm thick 35 mm wide
0660 Oxidised mild steel sliding door bolt 300x16 mm
0661 Oxidised mild steel sliding door bolt 250x16 mm
0662 Oxidised mild steel door latch 300x20x6 mm
0663 Oxidised mild steel door latch 250x20x6 mm
0664 Oxidised mild steel tower bolt (barrel type) 250x10 mm
0665 Oxidised mild steel tower bolt (barrel type) 200x10 mm
0666 Oxidised mild steel tower bolt (barrel type) 150x10 mm
0667 Oxidised mild steel tower bolt (barrel type) 100x10 mm
0668 Oxidised mild steel handles 125 mm
0669 Oxidised mild steel handles 100 mm
0670 Oxidised mild steel handles 75 mm
0679 Oxidised mild steel hasps and staples (safety type) 150 mm
0680 Oxidised mild steel hasps and staples (safety type) 115 mm
0681 Oxidised mild steel hasps and staples (safety type) 90 mm
0682 Oxidised mild steel screws 50 mm
0683 Oxidised mild steel screws 40 mm
0684 Oxidised mild steel screws 30 mm
0685 Oxidised mild steel screws 25 mm
0686 Oxidised mild steel screws 20 mm
0687 Anodised Aluminium butt hinges 125x75x4 mm
0688 Anodised Aluminium butt hinges 125x63x4 mm
0689 Anodised Aluminium butt hinges 100x75x4 mm
0690 Anodised Aluminium butt hinges 100x63x3.2 mm
0691 Anodised Aluminium butt hinges 100x63x4 mm
0692 Anodised Aluminium butt hinges 75x63x4 mm
0693 Anodised Aluminium butt hinges 75x63x3.2 mm
0694 Anodised Aluminium butt hinges 75x45x3.2 mm
0696 Anodised Aluminium sliding door bolt 300x16 mm
0697 Anodised Aluminium sliding door bolt 250x16 mm
0698 Anodised Aluminium tower bolt (barrel type) 300x10 mm
0699 Anodised Aluminium tower bolt (barrel type) 250x10 mm
0700 Anodised Aluminium tower bolt (barrel type) 200x10 mm
0701 Anodised Aluminium tower bolt (barrel type) 150x10 mm
0702 Anodised Aluminium tower bolt (barrel type) 100x10 mm
0703 Anodised Aluminium handles 125 mm with plate 175 x 32 mm
0704 Anodised Aluminium handles 100 mm with plate 150 x 32 mm
0705 Anodised Aluminium handles 75mm with plate 125 x 32 mm
0706 Anodised Aluminium kicking plate 50 cm long 100x3.15 mm
0713 Block board construction flush door with teak wood ply on both faces 35 mm thick

0714 Block board construction flush door with teak wood ply on both faces 30 mm thick

0715 Block board construction flush door with teak wood ply on both faces 25 mm thick

0717 Block board construction flush door with commercial ply on both faces 35 mm thick

0718 Block board construction flush door with commercial ply on both faces 30 mm thick

0719 Block board construction flush door with commercial ply on both faces 25 mm thick

0752 Block board construction flush door lipping 25 mm thick

0753 Square vision panel in Block board construction flush door not exceeding 0.10 sqm

0754 Circular vision panel in Block board construction flush door

0755 Decorative type louvers in Block board construction flush door

0757 Rebate cutting in block board construction flush door

0759 Decorative plywood 4 mm

0761 Fuel wood
0763 Glue
0764 Calcium silicate base compound for jointing calcium silicate tiles
0765 Hessian cloth
0768 Cement Concrete Jali 50 mm thick
0769 Cement Concrete Jali 40 mm thick
0770 Cement Concrete Jali 25 mm thick
0771 Kerosene oil
0772 White cement based polymer modified self curing compound in powder form

0773 Unslaked lime

0775 Dehradun white lime
0776 Satna lime
0777 Dry hydrated lime (factory made)
0784 Marble dust/ powder
0785 Marble chips up to 4 mm and down size White & black
0788 Marble chips large size above 4 mm White & black
0801 Silicon and acrylic emulsion
0802 Acrylic distemper 1st quality , having VOC content less than 50 grams/ litre
0803 Acrylic emulsion, having VOC content less than 50 grams/ litre
0804 Premium plastic acrylic emulsion of interior grade, having VOC content less than 50
grams/ litre
0806 Ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content
less than 50 grams/ litre
0808 Water thinnable cement primer for interior wall surface, having VOC content less than 50
grams/ litre
0810 Moorum
0811 Mud (dry)
0818 Linseed oil (double boiled)
0824 White cement based putty
0826 Aluminium paint
0827 Acid proof paint (chocolate or black)
0828 Anticorrosive bituminous paint (black)
0829 Black Japan paint
0833 Synthetic enamel paint in black or chocolate shade
0834 Synthetic enamel paint in all shades except black or chocolate shade
0836 100% Premium acrylic dirt resistance, Silicone additives exterior paint
0837 Acrylic Exterior Primer
0845 Roofing paint for iron sheets in red colour
0850 White lead
0851 Water proofing cement paint
0855 Wax polish (ready made)
0856 Ordinary varnish
0857 Superior copal varnish
0858 Superior spar varnish
0859 Oil type wood preservative
0863 Putty for wood work
0865 Pig lead
0868 Premixed super white gypsum plaster
0869 Plaster of Paris
0870 Plug
0873 Copper pins 6 mm dia 7.5 cm long
0874 Black colour dark shade pigment
0875 Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment

0876 Green or blue medium shade pigment

0886 Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia

0966 Sand Cast iron plain shoe 150 mm dia

0967 Copper plate
0969 Pulley 25 mm dia
0973 Rolling shutter made of 80x1.25 mm machine rolled laths
0974 Top cover for rolling shutters 1.25 mm thick
0975 27.5 cm long wire spring grade No. 2 for rolling shutters
0976 Ball bearing for rolling shutters
0977 Extra for mechanical devices chain and cranked operation for operating rolling shutters:
exceeding 10.00 sqm and up to 16.80 sqm area of door
0978 Extra for mechanical devices chain and cranked operation for operating rolling shutters:
exceeding 16.80 sqm area of door
0979 Royalty for good earth
0980 Royalty for sludge
0982 Coarse sand (zone III)
0983 Fine sand (zone IV)
0992 Galvanised steel plain sheets
0993 FY-1860 grade wire strands
0994 Standard quality hard board sheet 3 mm thick
0996 Standard quality hard board sheet 4.5 mm thick
0999 Shellac
1000 Spirit
1001 Spun yarn
1002 Mild steel round bar 12 mm dia and below
1003 Mild steel round bar above 12 mm dia
1004 Average rate of Mild steel round bars for reinforcement
1005 Twisted steel/ deformed TMT bars Fe-500D
1006 Mild steel square bars
1007 Structural steel such as tees, angles channels and R.S. joists
1008 Flats up to 10 mm in thickness
1009 Flats exceeding 10 mm in thickness
1010 Mild steel plates
1011 Steel glazed door, window/ ventilator, all members viz. F7D, F4B, K11 and K12B etc.

1012 Pregalvanized high tensile steel confirming to IS:277-199

1013 Mild steel sheets of 1.00 mm thickness for tanks
1015 Mild steel expanded metal 20x60 mm strands 3.25 mm wide
1.60 mm thick
1019 Mild steel hooks
1020 Mild steel rivets
1021 Hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 kg/sqm

1022 Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots

1023 Galvanised steel J or L hooks 8 mm dia

1024 Galvanised steel bolts & nuts 10 mm dia and 125 mm long round head with slots

1025 Mild steel bolts 6 mm dia and 25 mm long with hexagonal head
1027 Erection Bolts ( Minimum 04 nos for each element)
1028 Straining bolts
1029 Galvanised steel barbed wire of 9.8 kg /100metre
1030 Galvanised steel turn buckles
1031 Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4
galvanised steel nuts
1032 Galvanised steel bolts 10 mm dia and 7 cm long with nuts
1034 Bolts and nuts up to 300 mm in length
1035 Bolts and nuts above 300 mm in length
1036 Iron pintels including welded pin
1143 Steel beading 10x10x1.6mm (box type)
1145 Aluminium Plain Strip edging 38x12x3 mm
1149 Glass strip 4 mm thick 40 mm deep
1151 Boundary stone top chisel dressed 15x15x90 cm
1154 Through and bond stone
1157 Stone for masonry work
1158 Stone for pitching 15 cm x 22.5 cm
1159 Stone dust
1160 Red sand stone block
1161 White sand stone block
1163 White sand stone slab 75 mm thick (un-dressed)
1164 Red sand stone slab 40 mm thick (un-dressed)
1165 White sand stone slab 40 mm thick (un-dressed)
1166 Red sand stone slab 30 mm thick (un-dressed)
1168 Kota stone slab 20 mm to 25 mm thick (semi-polished)
1169 Kota stone slab 25mm thick (rough chiseled)
1174 Red sand stone slab 45 mm to 50 mm thick (un-dressed)
1175 White sand stone slab 45 mm to 50 mm thick (un-dressed)
1177 Stone grit 6 mm and down size or pea sized gravel
1179 Crushed stone 2.36 mm to 12.5 mm size
1182 Surkhi
1186 Superior class teak wood such as Dandeli, Balarshah or Malabar in planks

1187 First class teak wood in scantling

1188 First class teak wood in planks
1189 Second class teak wood in scantling
1190 Second class teak wood in planks
1191 Marandi wood in planks
1192 Marandi wood in scantling
1194 Second class deodar wood in planks
1196 First class kail wood in planks
1197 Second class kail wood in scantling
1198 Second class kail wood in planks
1199 Sal wood in scantling

1200 Kiln seasoned selected sheesham wood planks

1201 Precast terrazzo tiles 22 mm thick (light shade)
1202 Precast terrazzo tiles 22 mm thick (medium shade)
1203 Precast terrazzo tiles 22 mm thick (dark shade)
1204 Precast heat resistant terrace tiles (size 300x300 mm) and 20 mm thick
1207 G.I. Limpet washer
1208 Bitumen washer
1209 G.I. plain washer thick
1210 G.I. plain washer thin
1211 G.I. plain washer for seam bolts
1213 Water proofing materials
1214 Welding by gas plant
1215 Welding by electric plant
1216 Whiting
1217 GI Wire mesh 100x100 mm
1218 M.S. Shear stud
1219 M.S. Wire nails
1220 M.S. Wire mesh (rabbit)
1221 M.S. 20 mm dia holding down bolts
1222 Mild steel sheets with bolts and nuts to rest on pintels
1223 Steel weld mesh
1224 Hard drawn steel wire
1225 Mild steel flat strap fitting
1227 Chequered terrazzo tiles 22 mm thick (light shade)
1228 Chequered terrazzo tiles 22 mm thick (medium shade)
1229 Chequered terrazzo tiles 22 mm thick (dark shade)
1231 Extra for selected planks of second class teakwood
1234 Aluminium Plain Strip edging 57x12x3 mm
1235 Diesel
1237 Cutting marble or sand stone slab up to 50 mm thick by mechanical device

1238 Extra for selected planks of first class teakwood

1239 18 mm thick Flamed finish granite stone slab
1240 18 mm thick Italian Marble stone slab, Perlato (slab area up to 0.5 sqm).
1241 Commercial LPG in cylinder
1242 Glass mossaic tiles (20 mm x 20 mm x 4 mm)
1243 Tile fixing chemical adhesive
1244 Cement Polymer Grout Compound
1245 Acid for cleaning tiles
1246 Silicon based Joint Sealant for Tiles
1247 Rubber base Adhesive
1248 Epoxy based sealing Compound
1249 Acrylic based sealing compound
1250 Non woven reinforcement Tape
1251 M-60 grade cemetitious grout (Non Shrink)
1252 Cementitious polymer base adhesive confirming to EOTA ETAG 004 (European Technical
Approval)

1253 Polypropylene mechanical fastener with plastic pin confirming to EOTA ETAG 014
(European Technical Approval) having dia 10mm & L=200mm

1254 Moisture cure Polyurethane Foam

1255 PVC Corner Bead of size 25mmx25mm fixed with glass fibre mesh (100mm x 100mm)

1256 Cementitious polymer base coat confirming to EOTA ETAG 004 (European Technical
Approval)
1257 Fiberglass mesh with alkali-resistant coating having mass per unit area ?145 g/m2,
mesh size: 3.9x4.0 mm ±10%
1301 Bleaching powder
1304 Surface box for stop cock
1305 Surface box for sluice valve
1307 Surface box for water meter
1309 C.I. bracket for wash basin and sinks
1313 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with
S.S. tringular plate for Eureopean type W.C.
1314 C.P.brass chain with 32 mm dia rubber plug
1315 C.P.brass chain with 40 mm dia rubber plug
1316 50mmx50mm hardwood plug
1330 Clamps and M.S. stays including bolts and nuts for 100 mm pipe
1331 M.S. Holder bat clamp of approved design for 100 mm S.C.I. pipe
1332 M.S. Holder bat clamp of approved design for 75 mm S.C.I. pipe
1334 Clamps and M.S. stays including bolts and nuts for 50 mm pipe
1335 Clamps and M.S. stays including bolts and nuts for 75 mm pipe
1336 Clearing eye with chain and lid 100 mm dia
1337 Clearing eye with chain and lid 150 mm dia
1339 Brass bib-cock 15 mm dia
1340 Brass bib-cock 20 mm dia
1342 Brass stop-cock 15 mm dia
1343 Brass stop-cock 20 mm dia
1350 Mosquito proof coupling of approved design
1352 C.I. cover and frame 300x300 mm inside
1353 C.I. cover without frame 300x300 mm inside weight not less than 4.50 kg
1354 C.I. Rectangular cover 455x610 mm with frame (low duty)
1355 C.I. Rectangular cover 455x610 mm without frame (low duty)
1356 C.I. 500 mm dia cover with frame (medium duty)
1357 C.I. 500 mm dia cover without frame (medium duty)
1360 C.I. mouth, brass ferrule 15 mm dia
1361 C.I. mouth, brass ferrule 20 mm dia
1362 C.l. mouth, brass ferrule 25 mm dia
1363 Vitreous china foot rests 250x130x30 mm
1364 C.I. grating 100x100 mm
1366 C.I. grating 150x150 mm
1367 C.I. grating 180x180 mm
1369 S.C.I. gully or nahani grating 100 mm dia

1373 Rubber insertions for 75 mm dia pipe joints

1374 Rubber insertions for 100 mm dia pipe joints
1375 Rubber insertions for 125 mm dia pipe joints
1376 Rubber insertions for 150 mm dia pipe joints
1377 Rubber insertions for 200 mm dia pipe joints
1378 Rubber insertions for 250 mm dia pipe joints
1379 Rubber insertions for 300 mm dia pipe joints
1380 Rubber insertions for 350 mm dia pipe joints
1381 Rubber insertions for 400 mm dia pipe joints
1382 Rubber insertions for 450 mm dia pipe joints
1383 Rubber insertions for 500 mm dia pipe joints
1384 Rubber insertions for 600 mm dia pipe joints
1392 Mirror of superior make glass 60x45 cm
1396 Vitreous china pedestal for wash basin
1397 Pig lead
1464 S & S.C.I. standard specials upto 300 mm dia (heavy class)
1466 S & S.C.I. standard specials over 300 mm dia (heavy class)
1468 Flanged C.I. standard specials upto 300 mm dia (heavy class)
1470 Flanged C.I. standard specials over 300 mm dia (heavy class)
1472 Casing pipe 100 mm dia
1532 Flush pipe with union spreaders and clamps all in C.P. brass for single stall

1533 Flush pipe with union spreaders and clamps all in C.P. brass for double stall

1534 Flush pipe with union spreaders and clamps all in C.P. brass for range of three stall

1535 Flush pipe with union spreaders and clamps all in C.P. brass for range of four stall

1540 Flush pipe and spreaders G.l. for single set of one squatting plate urinal
1541 Flush pipe and spreaders G.l. for range of two squatting plates urinal
1542 Flush pipe and spreaders G.l. for range of three squatting plates urinal
1543 Flush pipe and spreaders G.l. for range of four squatting plates urinal
1545 G.I. pipes 15 mm dia
1546 G.I. pipes 20 mm dia
1547 G.I. pipes 25 mm dia
1548 G.I. pipes 32 mm dia
1549 G.I. pipes 40 mm dia
1550 G.I. pipes 50 mm dia
1551 G.I. pipes 65 mm dia
1552 G.I. pipes 80 mm dia
1555 G.I. back (jam) nuts 25 mm dia
1559 G.I. back (jam) nuts 65 mm dia
1608 G.I. tees (equal) 25 mm
1612 G.I. tees (equal) 65 mm
1614 G.I. inlet connection
1616 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 75 mm dia

1617 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 100 mm dia

1618 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 150 mm dia

1620 S.C.I. plain bend 75 mm dia

1621 S.C.I. plain bend 100 mm dia
1622 S.C.I. plain bend 150 mm dia
1624 S.C.I. bend with access door 75 mm dia
1625 S.C.I. bend with access door 100 mm dia
1627 S.C.I. plain single equal junctions 75x75x75 mm dia
1628 S.C.I. plain single equal junctions 100x100x100 mm dia
1630 S.C.I. single equal junctions 75x75x75 mm dia with access door
1631 S.C.I. single equal junctions 100x100x100 mm dia with access door
1633 S.C.I. plain double equal junctions 75x75x75x75 mm dia
1634 S.C.I. plain double equal junctions 100x100x100x100 mm dia
1636 S.C.I. double equal junctions 75x75x75x75 mm dia with access door
1637 S.C.I. double equal junctions 100x100x100x100 mm dia with access door
1639 Slotted cowl (terminal guard) 75 mm dia
1640 Slotted cowl (terminal guard) 100 mm dia
1641 G.I. Union 15 mm nominal bore
1642 G.I. Union 20 mm nominal bore
1643 G.I. Union 25 mm nominal bore
1644 G.I. Union 32 mm nominal bore
1645 G.I. Union 40 mm nominal bore
1646 G.I. Union 50 mm nominal bore
1647 G.I. Union 65 mm nominal bore
1648 G.I. Union 80 mm nominal bore
1649 Polyethylene water storage tank with cover and suitable locking arrangement

1653 Sand cast iron S&S plain single unequal junctions: 100x100x75 mm dia
1656 Sand cast iron S&S single unequal junctions: 100x100x75 mm dia with access door

1659 Sand cast iron S&S plain double unequal junctions: 100x100x75x 75 mm dia

1662 Sand cast iron S&S double unequal junctions: 100x100x75x75 mm dia with access door

1666 Sand cast iron heel rest bend 75 mm dia

1667 Sand cast iron heel rest bend 100 mm dia
1669 S.C.I. single equal invert branch of required degree 75x75x75 mm dia
1670 S.C.I. single equal invert branch of required degree 100x100x 100 mm dia

1672 S.C.I. double equal invert branch of required degree 75x75x75x 75 mm dia
1673 S.C.I. double equal invert branch of required degree 100x100x100x 100 mm dia

1674 S.C.I. single unequal invert branch of required degree 100x100x 75 mm dia

1677 S.C.I. double unequal invert branch of required degree 100x100x75x 75 mm dia

1682 S.C.I. door pieces 75 mm dia

1683 S.C.I. door pieces 100 mm dia
1685 S.C.I. collar 75 mm dia
1686 S.C.I. collar 100 mm dia
1687 Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore

1688 Unplasticised P.V.C. connection pipe with brass union 30 cm long 20 mm bore

1689 Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore

1690 Unplasticised P.V.C. connection pipe with brass union 45 cm long 20 mm bore

1693 S.C.I. hand pump

1700 R.C.C. pipes NP2 class 100 mm dia
1701 R.C.C. pipes NP2 class 150 mm dia
1702 R.C.C. pipes NP2 class 250 mm dia
1703 R.C.C. pipes NP2 class 300 mm dia
1704 R.C.C. pipes NP2 class 450 mm dia
1705 R.C.C. pipes NP2 class 500 mm dia
1706 R.C.C. pipes NP2 class 600 mm dia
1707 R.C.C. pipes NP2 class 700 mm dia
1709 R.C.C. pipes NP2 class 800 mm dia
1710 R.C.C. pipes NP2 class 900 mm dia
1711 R.C.C. pipes NP2 class 1000 mm dia
1712 R.C.C. pipes NP2 class 1100 mm dia
1713 R.C.C. pipes NP2 class 1200 mm dia
1714 R.C.C. collars NP2 class 100 mm dia
1715 R.C.C. collars NP2 class 150 mm dia
1716 R.C.C. collars NP2 class 250 mm dia
1717 R.C.C. collars NP2 class 300 mm dia
1718 R.C.C. collars NP2 class 450 mm dia
1719 R.C.C. collars NP2 class 500 mm dia
1720 R.C.C. collars NP2 class 600 mm dia
1721 R.C.C. collars NP2 class 700 mm dia
1723 R.C.C. collars NP2 class 800 mm dia
1724 R.C.C. collars NP2 class 900 mm dia
1725 R.C.C. collars NP2 class 1000 mm dia
1726 R.C.C. collars NP2 class 1100 mm dia
1727 R.C.C. collars NP2 class 1200 mm dia
1728 RCC pipe 450 mm dia NP-3 spigot
1729 RCC pipe 600 mm dia NP-3 spigot
1730 RCC pipe 900 mm dia NP-3 spigot
1731 RCC pipe 1000 mm dia NP-3 spigot
1732 RCC pipe 1200 mm dia NP-3 spigot

1733 RCC pipe 1800 mm dia NP-3 spigot

1734 RCC pipe 450 mm dia NP-4 spigot
1735 RCC pipe 600 mm dia NP-4 spigot
1736 RCC pipe 900 mm dia NP-4 spigot
1737 RCC pipe 1000 mm dia NP-4 spigot
1738 RCC pipe 1200 mm dia NP-4 spigot
1739 RCC pipe 1800 mm dia NP-4 spigot
1854 Stoneware pipes grade A (60 cm long) 100 mm dia
1855 Stoneware pipes grade A (60 cm long) 150 mm dia
1856 Stoneware pipes grade A (60 cm long) 200 mm dia
1857 Stoneware pipes grade A (60 cm long) 230 mm dia
1858 Stoneware pipes grade A (60 cm long) 250 mm dia
1859 Stoneware pipes grade A (60 cm long) 300 mm dia
1863 Fire clay kitchen sink: 600x450x250 mm
1871 White vitreous china laboratory sink 450x300x150 mm
1872 White vitreous china laboratory sink 600x450x200 mm
1875 White plastic seat (solid) with lid C.P. brass hinges and rubber buffers
1876 Black plastic seat (solid) with lid C.P. brass hinges and rubber buffers
1878 Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia
1879 Shower rose C.P. brass for 15 to 20 mm inlet 150 mm dia
1880 Dismenteled P or S trap scrap (approx wt 2kg)
1881 Spun yarn
1882 Strainer brass 40 mm dia 1.5 metre long
1885 15 mm C.P. brass tap
1889 C.P. brass toilet paper holder of standard size
1890 Centrifugally SCI(spun) S & S P or S trap
1891 C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.
brass: 50 mm dia
1893 C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.
brass: 80 mm dia
1895 C.P. brass trap 40 mm dia
1896 100 mm S.C.I. trap with vent heel
1897 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet
1898 100 mm S.C.I. trap with 100 mm inlet and 75 mm outlet
1900 S.W. gully trap P type 100x100 mm
1902 S.W. gully trap P type 150x100 mm
1904 S.W. gully trap P type 180x150 mm
1913 Vitreous china lipped front urinal
1915 Vitreous china squatting plate urinal
1922 H.P. or L.P. ball valve with polythene floats: 15 mm dia
1923 H.P. or L.P. ball valve with polythene floats: 20 mm dia
1924 H.P. or L.P. ball valve with polythene floats: 25 mm dia
1926 20 mm dia Gunmetal gate valve with wheel
1927 Brass full way valve with C.I. wheel (screwed end) 25 mm dia
1928 Brass full way valve with C.I. wheel (screwed end) 32 mm dia
1929 Brass full way valve with C.I. wheel (screwed end) 40 mm dia

1930 Brass full way valve with C.I. wheel (screwed end) 50 mm dia
1931 Brass full way valve with C.I. wheel (screwed end) 65 mm dia
1932 Brass full way valve with C.I. wheel (screwed end) 80 mm dia
1933 Gunmetal non-return valve-horizontal (screwed end) 25 mm dia
1934 Gunmetal non-return valve-horizontal (screwed end) 32 mm dia
1935 Gunmetal non-return valve-horizontal (screwed end) 40 mm dia
1936 Gunmetal non-return valve-horizontal (screwed end) 50 mm dia
1937 Gunmetal non-return valve-horizontal (screwed end) 65 mm dia
1938 Gunmetal non-return valve-horizontal (screwed end) 80 mm dia
1940 C.I. sluice valve (with caps) class I: 100 mm dia
1941 C.I. sluice valve (with caps) class I : 125 mm dia
1942 C.I. sluice valve (with caps) class I: 150 mm dia
1943 C.I. sluice valve (with caps) class I : 200 mm dia
1944 C.I. sluice valve (with caps) class I : 250 mm dia
1945 C.I. sluice valve (with caps) class I: 300 mm dia
1947 Vitreous china flat back wash basin 630x450 mm
1949 Vitreous china angle back wash basin 600x480 mm
1950 Vitreous china angle back wash basin 400x400 mm
1951 C.P. brass waste 32 mm
1952 C.P. brass waste 40 mm
1953 Vitreous china Indian type W.C. pan of size 580 mm
1954 Vitreous china orrisa type W.C. pan of size 580 mm
1955 Vitreous china pedestal type water closet
1956 Bolts and nuts 16 mm dia 60 mm long
1957 Bolts and nuts 16 mm dia 65 mm long
1958 Bolts and nuts 20 mm dia 65 mm long
1959 Bolts and nuts 20 mm dia 70 mm long
1960 Bolts and nuts 20 mm dia 75 mm long
1961 Bolts and nuts 20 mm dia 80 mm long
1962 Bolts and nuts 24 mm dia 85 mm long
1963 Bolts and nuts 24 mm dia 90 mm long
1964 Bolts and nuts 27 mm dia 100 mm long
1965 White vitreous china dual purpose closet (Anglo Indian W.C.) suitable for use as squatting
pan or European type water closet as per manufacturer's specifications

1966 Floor mounted white vitrous china double trap syphonic WC with 10 litre cistern and all
fittings & fixtures,seat cover etc
1970 Vitreous china foot rests 250x125x25 mm
1980 Fly ash
1984 Common burnt clay F.P.S. bricks tile class designation 10
1986 Common burnt clay modular bricks class designation 12.5
2200 Carriage of Steam coal
2201 Carriage of Bricks
2202 Carriage of Stone aggregate below 40 mm nominal size
2203 Carriage of Coarse sand
2204 Carriage of Timber cum

2205 Carriage of Steel tonne

2206 Carriage of Stone aggregate 40 mm nominal size and above cum
2207 Carriage of Brick tiles 1000 Nos
2208 Carriage of Lime cum
2209 Carriage of Cement tonne
2211 Carriage of Tar / Bitumen tonne
2215 Carriage of Soling stone & masonry stone cum
2216 Carriage of Stone blocks white & red sand stone & kota stone slab tonne
2224 Carriage of S.W. pipes 100 mm dia 100 metre
2225 Carriage of S.W. pipes 150 mm dia 100 metre
2226 Carriage of S.W. pipes 200 mm dia 100 metre
2228 Carriage of S.W. pipes 250 mm dia 100 metre
2229 Carriage of S.W. pipes 300 mm dia 100 metre
2241 Carriage of Good earth cum
2242 Carriage of Dump manure by mechanical transport upto 5 km lead cum
2260 Carriage of Brick aggregate cum
2261 Carriage of Fine sand (1 part of badarpur sand: 2 parts jamuna sand) cum
2262 Carriage of Flyash cum
2264 Carriage of Rubbish cum
2265 Carriage of Moorum cum
2266 Carriage of Surkhi cum
2267 Carriage of Stone dust cum
2268 Carriage of Marble dust and/or marble chips cum
2271 Carriage of G.I. pipes below 100 mm dia tonne
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne
2273 Carriage of A.C.sheet and accessories tonne
2275 Carriage of R.C.C. pipes 100 mm dia 100 metre
2281 Carriage of R.C.C. pipes 150 mm dia 100 metre
2287 Carriage of R.C.C. pipes 250 mm dia 100 metre
2290 Carriage of R.C.C. pipes 300 mm dia 100 metre
2299 Carriage of R.C.C. pipes 450 & 500 mm dia 100 metre
2302 Carriage of G.I. sheet and accessories tonne
2303 Carriage of R.C.C. pipes 600,700,750 & 800 mm dia 100 metre
2308 Carriage of Plaster of paris tonne
2309 Carriage of Cast Iron fittings tonne
2311 Carriage of Red bajri cum
2314 Carriage of Barbed wire tonne
2317 Carriage of Sludge cum
2319 Carriage of Spun iron S & S pipes 100 mm dia 100 metre
2320 Carriage of Spun iron S & S pipes 125 mm dia 100 metre
2321 Carriage of Spun iron S & S pipes 150 mm dia 100 metre
2322 Carriage of Spun iron S & S pipes 200 mm dia 100 metre
2323 Carriage of Spun iron S & S pipes 250 mm dia 100 metre
2324 Carriage of Spun iron S & S pipes 300 mm dia 100 metre
2325 Carriage of Spun iron S & S pipes 350 mm dia 100 metre
2326 Carriage of Spun iron S & S pipes 400 mm dia 100 metre

2327 Carriage of Spun iron S & S pipes 450 mm dia 100 metre
2328 Carriage of Spun iron S & S pipes 500 mm dia 100 metre
2329 Carriage of Spun iron S & S pipes 600mm dia 100 metre
2330 Carriage of C.I. pipes 500 mm dia 100 metre
2331 Carriage of R.C.C. pipes 900 mm dia 100 metre
2332 Carriage of R.C.C. pipes 1000 mm dia 100 metre
2333 Carriage of R.C.C. pipes 1100 mm dia 100 metre
2334 Carriage of R.C.C. pipes 1200 mm dia 100 metre
2335 Carriage of sand cum
2336 Carriage of R.C.C. pipe above 1200 mm dia and upto 1800 mm dia 100 metre
2341 Carriage of Pig lead tonne
2342 Carriage of Solvent / Diesel. quintal
2343 Carriage of Ductile Iron pipes (k7) 100 mm dia 100 metre
2344 Carriage of Cast iron pipes 150 mm dia 100 metre
2345 Carriage of Cast iron pipes 200 mm dia 100 metre
2346 Carriage of Cast iron pipes 250 mm dia 100 metre
2347 Carriage of Cast iron pipes 300 mm dia 100 metre
2348 Carriage of Cast iron pipes 350 mm dia 100 metre
2349 Carriage of Cast iron pipes 400 mm dia 100 metre
2350 Carriage of Cast iron pipes 450 mm dia 100 metre
2351 Carriage of Cast iron pipes 500 mm dia 100 metre
2352 Carriage of Cast iron pipes 600 mm dia 100 metre
2353 Carriage of Cast iron pipes 700 mm dia 100 metre
2355 Carriage of Cast iron pipes 800 mm dia 100 metre
2356 Carriage of Cast iron pipes 900 mm dia 100 metre
2357 Carriage of Cast iron pipes 1000 mm dia 100 metre
2358 Carriage of Bamboo Mat corrugated sheets and accessories tonne
2391 Strips-Aluminium fluted 3.15 mm thick and 150 mm wide metre
2392 Strips Aluminium fluted 3.15 mm thick and 200 mm wide metre
2393 1 mm thick Stainless Steel Cover plate grade 304 kg
2394 Coupler 16 mm dia each
2395 Coupler 20 mm dia each
2396 Coupler 25 mm dia each
2397 Coupler 28 mm dia each
2398 Coupler 32 mm dia each
2399 Complete Roof Joint of 100 mm metre
2400 Complete Roof Joint of 150 mm metre
2401 Complete Roof Joint of 200 mm metre
2402 Epoxy adhesive kg
2403 Floor Joint of 100 mm metre
2404 Floor Joint of 150 mm metre
2405 Floor Joint of 200 mm metre
2406 Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm)
sqm

2407 Float glass panes of nominal thickness 5 mm (weight not less than
12.50 kg/sqm)

2408 Float glass panes of nominal thickness 8 mm (weight not less than
20.00 kg/sqm)
2409 Wall Joint of 100 mm
2410 Wall Joint of 150 mm
2411 Wall Joint of 200 mm
2412 Ply wood 5 ply with commercial ply on both faces 6 mm thick
2413 12 mm commercial ply
2414 18 mm thick block board with commercial ply veneering on both side
2415 21mm thick clear toughened Laminated glass for fins with holes
2447 Hollock ballies 125 mm diameter
2449 Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws,
bolts, nuts and washers complete
2451 Brass cupboard lock 6 levers of approved quality, 40 mm size
2452 Brass cupboard lock 6 levers of approved quality, 50 mm size
2453 Brass cupboard lock 6 levers of approved quality, 65 mm size
2454 Brass cupboard lock 6 levers of approved quality, 75 mm size
2455 Brass hanging type door stopper 150 mm
2456 Hydraulic door closer bottle type M.S. body with necessary accessories and screws
complete
2459 Anodised Aluminium hanging type door stopper
2464 Anodised Aluminium pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws,
bolts, nuts and washers complete
2465 Anodised Aluminium Casement stay 250 mm
2466 Hollock wood in scantling
2467 Chromium plated Brass pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws,
bolts, nuts and washers complete
2468 Nickled Chromium Brass cupboard lock 40 mm size
2469 Nickled Chromium Brass cupboard lock 50 mm size
2470 Nickled Chromium Brass cupboard lock 65 mm size
2471 Nickled Chromium Brass cupboard lock 75 mm size
2480 Ply wood 5 ply with teak ply on both faces 9 mm thick
2481 Ply wood 5 ply with teak ply on one face and commercial ply on another face 9 mm thick

2483 Ply wood 7 ply with teak ply on one face and commercial ply on another face 9 mm thick

2484 Pre-laminated with decorative lamination on both side exterior Grade-I MDF Board 12 mm
thick confirming to IS:14587
2485 Pre-laminated with decorative lamination on both side exterior Grade-I MDF Board 18 mm
thick confirming to IS:14587
2486 Pre-laminated with decorative lamination one side and other side balancing
lamination exterior Grade-I MDF Board 25 mm thick confirming to IS: 14587

2487 Pre-laminated with decorative lamination one side and other side balancing
lamination exterior Grade-I MDF Board 12 mm thick confirming to IS:14587

2488 Pre-laminated with decorative lamination one side and other side balancing
lamination exterior Grade-I MDF Board 18 mm thick

confirming to IS:14587
2489 PVC edge bending tape 2.00 mm thick
2491 Pre laminated both side solid foam uPVC profile (45x20mm)
2492 Solid foam uPVC sheet 20mm thick pre laminated on both side
2493 PVC edge beading
2494 Expandable fastner with plastic sleeve
2495 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :
15786:2008
2496 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS :
15786:2008
2497 19mm thick prelaminated ply
2498 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per
IS 710
2500 Extra for selected planks of second class deodar wood
2504 Kiln seasoning of timber
2505 Hollock wood in planks
2506 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia double
threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6
grade sleave. Size 10mm x 60 mm

2507 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia double
threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6
grade sleave. Size 10mm x 80 mm

2508 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia double
threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6
grade sleave. Size 10 mm x 120 mm
2509 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia double
threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6
grade sleave. Size 10mm x 140 mm

2510 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia double
threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6
grade sleave. Size 10mm x 160 mm

2602 Common burnt clay F.P.S. (non modular) bricks class designation 7.5
2603 Common burnt clay F.P.S. (non modular) bricks class designation 5.0
2604 Weather/structural non sag elastomeric PU sealant (600ml Sausage) for joints in
RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum/ Alluminium work complying to ASTM C920,
DIN 18540-F & ISO 11600 incl all taxes

2605 Structural sealant - 6 mm x 12 mm

2606 Spacer tape 6.4 mm thick x 6 mm wide
2607 Weather Sealant - Non Staining (600 ml)
2608 Weather Sealant - Normal (300 ml)
2609 MS Brackets/Aluminium Alloy Brackets
2610 Silicon Gasket in Kg (Above 50 g / m)
2611 EPDM Gasket in Kg (Above 60 g / m)

2612 Anchor Fastner - M10

2613 SS Bolt with washer of different sizes for structural glazing / ACP Cladding

2614 SS Screws of sizes for structural glazing / ACP Cladding

2615 Protective Tape
2616 GI flashing - 1.2 mm Thick
2617 6 mm thick High performance glass
2618 6 mm thick clear heat strengthened glass
2619 6 mm thick clear heat strengthened glass
2620 ARMS GS HD - Top Hung -20"- Type P- Couple
2621 Connection Block for vision glass panel
2622 Curtain wall striker for vision glass panel
2623 Adjustable Fastening Pawl for vision glass panel
2624 Corner drive for vision glass panel
2625 Top wedge Block for vision glass panel
2626 Glass wool of denisity @ 48 Kg / cum with black glass tissue (BGT)
2627 SS Screws - # 8 x 19
2628 Weather Sealant - DC 789
2629 Cement Board
2630 Baker rod
2631 4 mm thick ACP
2632 Fire Stop
2634 GI/Aluminium Sheet (0.8 mm thick)
2635 GI Screws of gauge 10, length 25 mm for fixing cement fibre board to C section

2636 GI Screws of gauge 10, length 45 mm for fixing cement fibre board to C section

2637 Vapour barrier

2640 Glass panes of required thickness having 120 minutes of fire resistance both
integrity and radiation control (EI 120) and minimum 20 minutes
of insulation (EI 20)
2641 G.I U beading of 1.6 mm thick G.I sheet with ceramic tape.
2642 Ceramic tape 5 x20 mm size
2704 Aluminium Strip 40 mm wide and 2 mm thick
2708 Truf Paver (500 x 500 x 40 mm)
2709 Ceremic Tiles Pieces for Crazy Flooring
2710 White marble makrana second quality plain veined stone pieces for crazy flooring

2711 FS800H Grade Flooring Panel (Size 600 mm x600 mm x32 mm)
2712 Zinc Electroplated Pedestals - 300 mm
2713 Zinc Electroplated Pedestals - 450 mm
2714 Zinc Electroplated Tube Stinger
2715 Machine Screw for Fixing
2750 8 mm thick granite stone tiles (mirror polished of all shades)
2751 8 mm thick marble tiles (polished) Raj Nagar
2752 Double charge vitrified tile polished finish of size 60 x 60 cm

2753 Double charge vitrified tile polished finish of size 80 x 80 cm

2754 Double charge vitrified tile polished finish of size 60 x 120 cm
2755 Double charge vitrified tile polished finish of size 80 x 160 cm
2756 Double charge vitrified tile polished finish of size 100 x 100 cm
2757 Glazed vitrified tiles polished finish of size 60 x 60 cm
2758 Glazed vitrified tiles polished finish of size 60 x 120 cm
2759 Glazed vitrified tiles polished finish of size 80 x 80 cm
2760 Glazed vitrified tiles polished finish of size 80 x 120 cm
2761 Glazed vitrified tiles polished finish of size 120 x 120 cm
2762 Glazed Vitrified tiles Matt/Antiskid finish of size 60 x 60 cm
2763 Glazed Vitrified tiles Matt/Antiskid finish of size 60 x 120 cm
2764 Glazed Vitrified tiles Matt/Antiskid finish of size 80 x 80 cm
2765 Glazed Vitrified tiles Matt/Antiskid finish of size 80 x 120 cm
2766 Glazed Vitrified tiles Matt/Antiskid finish of size 120 x 120 cm
2901 Stone Aggregate (Single size): 100 mm nominal size
2902 Stone Aggregate (Single size): 80 mm nominal size
2903 Stone chippings/ screenings 4.75 mm nominal size
2904 Stone chippings/ screenings 150 micron nominal size
2908 Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size
2909 Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size
2914 Solvent
2916 Paving Asphalt VG 10 of approved quality
3002 Polyvinyl chloride sheet 400 micron thick
3004 Stone ware spouts 100 mm dia 60 cm long
3050 Galvanised steel corrugated sheets
3051 Aluminium troughed profile sheet 0.56mm thick with center to center pitch of 200 mm,
depth of 32 mm, overall profile width1092 mm, cover width 1000mm)

3052 Aluminium troughed profile sheet 0.71mm thick with center to center pitch of 200 mm,
depth of 32 mm, overall profile width1092 mm, cover width 1000mm

3053 Aluminium troughed profile sheet 0.91mm thick with center to center pitch of 200 mm,
depth of 32 mm, overall profile width1092 mm, cover width 1000mm
3054 Aluminium profile sheet 0.56mm thick with center to center pitch of 175 mm, depth of
46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of
1144mm, cover width 1050mm

3055 Aluminium profile sheet 0.71mm thick with center to center pitch of 175 mm, depth of
46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of
1144mm, cover width 1050mm

3056 Aluminium profile sheet 0.91mm thick with center to center pitch of 175 mm, depth of
46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of
1144mm, cover width 1050mm

3057 Aluminium Circular(sinusoidal) profile sheet 0.56mm thick with center to center pitch
of 75 mm, depth of 19 mm, overall profile width 1250mm, cover width 1150mm

3058 Aluminium Circular(sinusoidal) profile sheet 0.71mm thick with center to center pitch
of 75 mm, depth of 19 mm, overall profile width 1250mm, cover width 1150mm

3059 Aluminium Circular(sinusoidal) profile sheet 0.91mm thick with center to center pitch
of 75 mm, depth of 19 mm, overall profile width 1250mm, cover width 1150mm

3060 Precoated Aluminium troughed profile sheet 0.56mm thcik with center to center pitch of
200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm

3061 Precoated Aluminium troughed profile sheet 0.71mm thick with center to center pitch of
200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm

3062 Precoated Aluminium troughed profile sheet 0.91mm thick with center to center pitch of
200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm

3063 Aluminium color coated profile sheet 0.56mm thick with center to center pitch of 175 mm,
depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile
width of 1144mm, cover width 1050mm

3064 Aluminium color coated profile sheet 0.71mm thick with center to center pitch of 175 mm,
depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile
width of 1144mm, cover width 1050mm

3065 Aluminium color coated profile sheet 0.91mm thick ith center to center pitch of 175 mm,
depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile
width of 1144mm, cover width 1050mm

3066 Aluminium profile sheet 0.56mm thick with center to center pitch of
177.5 mm, depth of 28.5 mm, 987mm overall profile width, cover width 900mm

3067 Aluminium profile sheet 0.71mm thick with center to center pitch of
177.5 mm, depth of 28.5 mm, 987mm overall profile width, cover width 900mm

3068 Precoated/Mill finish Aluminium plain ridges 0.71 mm TCT/plain and 500- 600 mm wide

3069 Precoated/Mill finish Aluminium flashings/aprons 0.50mm TCT/plain and wide upto 600
mm
3070 Precoated/Mill finish Aluminium plain north light cuves
3071 Precoated/mill finish aluminium Barge board (Upto 200 mm)
3072 Precoated/Mill finish Aluminium crimp curve
3073 Precoated/Mill finish Aluminium gutter
3074 Stainless steel self tapping screw of 6x50mm with SS hex cap and 3mm thick EPDM seal

3075 EPDM washer

3076 Stainless steel bolts & nuts 10 mm dia and 125 mm long round head with slots

3080 Gunmetal non-return valve - vertical (screwed end) 25 mm dia

3084 Gunmetal non-return valve - vertical (screwed end) 32 mm dia
3088 Gunmetal non-return valve - vertical (screwed end) 40 mm dia

3092 Gunmetal non-return valve - vertical (screwed end) 50 mm dia

3096 Gunmetal non-return valve - vertical (screwed end) 65 mm dia
3213 Vitreous china Surgeon type wash basin of size 660x460 mm
3228 600x120 mm glass shelf with anodised aluminium angle frame,
C.P. brass brackets and guard rail of standard size
3229 Vitreous china flat back wash basin 550x400 mm
3300 Gunmetal non-return valve - vertical (screwed end) 80 mm dia
3311 C.I. sluice valve (with caps) class II : 100 mm dia
3314 C.I. sluice valve (with caps) class II : 125 mm dia
3317 C.I. sluice valve (with caps) class II : 150 mm dia
3320 C.I. sluice valve (with caps) class II : 200 mm dia
3321 C.I. sluice valve (with caps) class II : 250 mm dia
3326 C.I. sluice valve (with caps) class II : 300 mm dia
3327 15 mm Battery Based Sensor Pillar Cock
3617 C.P. Brass union 40mm dia
3620 C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres long: 100 mm dia

3621 C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres long: 75 mm dia

3624 S.C.I. S&S bends with access door 100 mm dia

3625 S.C.I. S&S bends with access door 75 mm dia
3628 S.C.I. S&S bend 100 mm dia
3629 S.C.I. S&S bend 75 mm dia
3634 S.C.I. S&S heel rest sanitary bend 100 mm dia
3635 S.C.I. S&S heel rest sanitary bend 75 mm dia
3640 S.C.I. S&S single equal junctions 100x100x100 mm
3641 S.C.I. S&S single equal junctions 75x75x75 mm
3644 S.C.I. S&S single equal junctions with access door 100x100x 100 mm
3645 S.C.I. S&S single equal junctions with access door 75x75x75 mm
3650 S.C.I. S&S double equal junctions 100x100x100x100 mm
3651 S.C.I. S&S double equal junctions 75x75x75x75 mm
3654 S.C.I. S&S double equal junctions with access door 100x100x100x 100 mm

3655 S.C.I. S&S double equal junctions with access door 75x75x75x75 mm
3660 S.C.I. S&S single unequal junctions 100x100x75 mm
3664 S.C.I. S&S single unequal junctions with access door 100x100x75 mm
3670 S.C.I. S&S double unequal junctions 100x100x75x75 mm
3674 S.C.I. S&S double unequal junctions with access door 100x100x75x 75 mm

3681 S.C.I. S&S single equal invert branch of required degree 100x100x 100 mm dia

3682 S.C.I. S&S single equal invert branch of required degree 75x75x 75 mm dia
3685 S.C.I. S&S double equal invert branch of required degree 100x100x100x 100 mm dia

3686 S.C.I. S&S double equal invert branch of required degree 75x75x75x 75 mm dia

3690 S.C.I. S&S single unequal invert branch of required degree 100x100x 75 mm dia

3695 S.C.I. S&S double unequal invert branch of required degree 100x100x 75x75 mm dia

3699 S.C.I. S&S, 75 mm offset for 75 mm dia pipe

3707 S.C.I. S&S, 150 mm offset for 75 mm dia pipe
3708 S.C.I. S&S, 150 mm offset for 100 mm dia pipe
3712 S.C.I. S&S, 114 mm offset for 75 mm dia pipe
3713 S.C.I. S&S, 114 mm offset for 100 mm dia pipe
3716 S.C.I. S&S, 152 mm offset for 75 mm dia pipe
3717 S.C.I. S&S, 152 mm offset for 100 mm dia pipe
3728 S.C.I. S&S door pieces 100 mm dia
3729 S.C.I. S&S door pieces 75 mm dia
3733 S.C.I. S&S, Slotted Cowl (Terminal Guard) 100 mm
3734 S.C.I. S&S, Slotted Cowl (Terminal Guard) 75 mm
3738 S.C.I. S&S, collars 100 mm
3739 S.C.I. S&S, collars 75 mm
3746 S.C.I. S&S, 75 mm offset for 75 mm dia pipe
3747 S.C.I. S&S, 75 mm offset for 100 mm dia pipe
3749 Vitreous china toilet paper holder of standard size
3860 560 mm dia cover with frame (Heavy duty)
3861 560 mm dia cover without frame (Heavy duty)
3862 SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to EN-
10312 standard 15 mm outer dia
3863 SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to EN-
10312 standard 22 mm outer dia
3864 SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to EN-
10312 standard 28 mm outer dia
3865 SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to EN-
10312 standard 35 mm outer dia
3866 SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to EN-
10312 standard 42 mm outer dia
3867 SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to EN-
10312 standard 54 mm outer dia
3868 Coupling/Socket fittings for 15 mm outer dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard
3869 Coupling/Socket fittings for 22 mm outer dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard
3870 Coupling/Socket fittings for 28 mm outer dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard
3871 Coupling/Socket fittings for 35 mm outer dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard
3872 Coupling/Socket fittings for 42 mm outer dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard
3873 Coupling/Socket fittings for 54 mm outer dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard
3874 Reducer for 22 mm X 15 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3875 Reducer for 28 mm X 15 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard

3876 Reducer for 28 mm X 22 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3877 Reducer for 35 mm X 22 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3878 Reducer for 35 mm X 28 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3879 Reducer for 42 mm X 22 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3880 Reducer for 42 mm X 28 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3881 Reducer for 42 mm X 35 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3882 Reducer for 54 mm X 28 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3883 Reducer for 54 mm X 35 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3884 Reducer for 54 mm X 42 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3885 Sleeve/Slip Coupling / Socket 15 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard
3886 Sleeve/Slip Coupling / Socket 22 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard
3887 Sleeve/Slip Coupling / Socket 28 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard
3888 Sleeve/Slip Coupling / Socket 35 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard
3889 Sleeve/Slip Coupling / Socket 42 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard
3890 Sleeve/Slip Coupling / Socket 54 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard
3891 Elbow 90° for 15 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard
3892 Elbow 90° for 22 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard
3893 Elbow 90° for 28 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard
3894 Elbow 90° for 35 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard
3895 Elbow 90° for 42 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard
3896 Elbow 90° for 54 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard
3897 Equal Tee for 15 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard
3898 Equal Tee for 22 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard
3899 Equal Tee for 28 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard
3900 Equal Tee for 35 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard

3901 Equal Tee for 42 mm outer dia SS pipe of grade 316L as per IS 6911:
2017 and conforming to EN-10312 standard
3902 Equal Tee for 54 mm outer dia SS pipe of grade 316L as per IS 6911:
2017 and conforming to EN-10312 standard
3903 Reducing Tee for 22 mm X 15 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard
3904 Reducing Tee for 28 mm X 15 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard
3905 Reducing Tee for 28 mm X 22 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard
3906 Reducing Tee for 35 mm X 15 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard
3907 Reducing Tee for 35 mm X 22 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard
3908 Reducing Tee for 35 mm X 28 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard
3909 Reducing Tee for 42 mm X 22 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard
3910 Reducing Tee for 42 mm X 28 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard
3911 Reducing Tee for 42 mm X 35 mm outer dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard
3912 Reducing Tee for 54 mm X 22 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard
3913 Reducing Tee for 54 mm X 28 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard
3914 Reducing Tee for 54 mm X 35 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard
3915 Reducing Tee for 54 mm X 42 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard
3916 Stainless steel Female thread Tee for 15 mm outer dia X 1/2"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3917 Stainless steel Female thread Tee for 22 mm outer dia X 1/2"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3918 Stainless steel Female thread Tee for 22 mm outer dia X 3/4"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3919 Stainless steel Female thread Tee for 28 mm outer dia X 1/2"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3920 Stainless steel Female thread Tee for 28 mm outer dia X 3/4"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3921 Stainless steel Female thread Tee for 28 mm outer dia X 1"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3922 Stainless steel Female thread Tee for 35 mm outer dia X 1/2" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
3923 Stainless steel Female thread Tee for 35 mm outer dia X 1-1/4" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3924 Stainless steel Female thread Tee for 42 mm outer dia X 1-1/4" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3925 Stainless steel Female thread Tee for 54 mm outer dia X 1-1/2" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3926 Stainless steel Female thread Tee for 54 mm outer dia X 2" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to EN-10312 standard

3927 Stainless steel Female threaded Connector/Adapter for 15 mm outer dia X 1/2" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3928 Stainless steel Female threaded Connector/Adapter for 22 mm outer dia X 1/2" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3929 Stainless steel Female threaded Connector/Adapter for 22 mm outer dia X 3/4" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3930 Stainless steel Female threaded Connector/Adapter for 28 mm outer dia X 1" nominal dia
threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3931 Stainless steel Female threaded Connector/Adapter for 35 mm outer dia X 1-1/4" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3932 Stainless steel Female threaded Connector/Adapter for 42 mm outer dia X 1-1/2" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3933 Stainless steel Female threaded Connector/Adapter for 54 mm outer dia X 2" nominal dia
threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3934 Stainless steel Male threaded Connector/ Adapter for 15 mm outer dia X 1/2" nominal dia
threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3935 Stainless steel Male threaded Connector/ Adapter for 22 mm outer dia X 1/2" nominal dia
threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3936 Stainless steel Male threaded Connector/ Adapter for 22 mm outer dia X 3/4" nominal dia
threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3937 Stainless steel Male threaded Connector/ Adapter for 28 mm outer dia X 1" nominal dia
threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3938 Stainless steel Male threaded Connector/ Adapter for 35 mm outer dia X 1-1/4" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3939 Stainless steel Male threaded Connector/ Adapter for 42 mm outer dia X 1-1/2" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
3940 Stainless steel Male threaded Connector/ Adapter for 54 mm outer dia X 2" nominal dia
threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Female Threaded Elbow 90°

3941 SS Female Threaded Elbow 90° for 15 mm outer dia X 1/2" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to EN-10312 standard

3942 SS Female Threaded Elbow 90° for 22 mm outer dia X 3/4" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to EN-10312 standard

3943 SS Female Threaded Elbow 90° for 28 mm outer dia X 1" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to
EN-10312 standard

3944 SS Female Threaded Elbow 90° for 35 mm outer dia X 1-1/4" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3945 SS Female Threaded Elbow 90° for 42 mm outer dia X 1-1/2" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3946 SS Female Threaded Elbow 90° for 54 mm outer dia X 2" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to
EN-10312 standard

3947 SS Male Threaded Elbow 90° for 15 mm outer dia X 1/2" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to
EN-10312 standard

3948 SS Male Threaded Elbow 90° for 22 mm outer dia X 3/4" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to
EN-10312 standard

3949 SS Male Threaded Elbow 90° for 28 mm outer dia X 1" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to EN-10312 standard

3950 SS Male Threaded Elbow 90° for 35 mm outer dia X 1-1/4" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to
EN-10312 standard

3951 SS Male Threaded Elbow 90° for 42 mm outer dia X 1-1/2" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to
EN-10312 standard

3952 SS Male Threaded Elbow 90° for 54 mm outer dia X 2" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to EN-10312 standard

3953 Stainless steel Cap for 15 mm outer dia pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3954 Stainless steel Cap for 22 mm outer dia pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3955 Stainless steel Cap for 28 mm outer dia pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3956 Stainless steel Cap for 35 mm outer dia pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3957 Stainless steel Cap for 42 mm outer dia pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3958 Stainless steel Cap for 54 mm outer dia pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard
3959 Stainless steel Pipe Bridge for 15 mm outer dia pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard
3960 Stainless steel Pipe Bridge for 22 mm outer dia pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard
3961 Stainless steel Pipe Bridge for 28 mm outer dia pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard
3962 SS Male Union for 15 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard

3963 SS Male Union for 22 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard

3964 SS Male Union for 22 mm outer dia X 3/4" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard

3965 SS Male Union for 28 mm outer dia X 1" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard

3966 SS Male Union for 35 mm outer dia X 1-1/4" nominal dia threaded of grade 316L as per
IS 6911:2017 and conforming to EN-10312 standard

3967 SS Male Union for 42 mm outer dia X 1-1/2" nominal dia threaded of grade 316L as per
IS 6911:2017 and conforming to EN-10312 standard

3968 SS Male Union for 54 mm outer dia X 2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard

3969 SS Female Union for 22 mm outer dia X 3/4" nominal dia threaded of grade 316L as per
IS 6911:2017 and conforming to EN-10312 standard

3970 SS Female Union for 28 mm outer dia X 1" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard
3971 SS Female Transition Elbow/ FTE for 15 mm outer dia X 1/2" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3972 SS Female Transition Elbow/ FTE for 22 mm outer dia X 1/2" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3973 SS Female Transition Elbow/ FTE for 22 mm outer dia X 3/4" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

3991 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for small series casement
window/door frame, sash, mullion & small series sliding window frame

3992 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series casement window/door
frame, sash, mullion, big & small series sliding window frame
 metre 39.00
100 Nos 75.00
100 Nos 60.00
100 Nos 45.00
100 Nos 40.00
100 Nos 35.00
each 5.00
10 Nos 125.00
10 Nos 90.00
10 Nos 65.00
10 Nos 55.00
10 Nos 335.00
10 Nos 300.00
10 Nos 235.00
10 Nos 200.00
each 140.00
each 120.00
each 100.00
each 160.00
each 140.00
each 120.00
metre 40.00
each 90.00
each 80.00
each 49.00
each 39.00
each 43.00
each 34.00
each 29.00
each 20.00
each 20.00
each 15.00
each 12.00
10 Nos 128.00
10 Nos 108.00
10 Nos 79.00
100 Nos 76.00
100 Nos 62.00
100 Nos 49.00
100 Nos 36.00
100 Nos 32.00
10 Nos 560.00
10 Nos 393.00
10 Nos 393.00
10 Nos 270.00
10 Nos 324.00
10 Nos 275.00
10 Nos 226.00
10 Nos 196.00
each 147.00
each 128.00
10 Nos 580.00
10 Nos 481.00
10 Nos 383.00
10 Nos 304.00
10 Nos 226.00
10 Nos 324.00
10 Nos 275.00
10 Nos 231.00
each 142.00

sqm 1800.00

sqm 1600.00

sqm 1400.00

sqm 1000.00

sqm 900.00

sqm 890.00

sqm of door 300.00

area
sqm of door 130.00
area
sqm of door 135.00
area
sqm of door 265.00
area
sqm of door 70.00
area
sqm 320.00
quintal 500.00
kg 75.00
kg 26.00
sqm 35.00
sqm 400.00
sqm 350.00
sqm 275.00
litre 50.00

kg 15.00

quintal 300.00
quintal 600.00
quintal 370.00
quintal 290.00
cum 1130.00
quintal 189.00
quintal 250.00
litre 120.00
Kg 40.00
litre 94.00
 litre 200.00

litre 105.00

litre 50.00

cum 500.00
cum 165.00
litre 200.00
kg 13.00
litre 150.00
litre 225.00
litre 100.00
litre 90.00
litre 175.00
litre 165.00
litre 270.00
litre 100.00
litre 120.00
kg 170.00
kg 38.00
kg 230.00
litre 100.00
litre 115.00
litre 115.00
litre 130.00
kg 28.00
kg 130.00
kg 6.00
kg 5.00
each 10.00
each 10.00
kg 70.00

kg 60.00

kg 56.00

each 45.00

each 285.00
kg 527.00
each 48.00
sqm 1400.00
metre 800.00
each 300.00
each 260.00

sqm 800.00

sqm 800.00

cum 40.00
cum 90.00
cum 1500.00
 cum 900.00
quintal 5000.00
quintal 5700.00
sqm 135.00
sqm 210.00
kg 300.00
litre 48.00
kg 50.00
quintal 4850.00
quintal 4750.00
quintal 4850.00
quintal 4900.00
quintal 4850.00
quintal 4950.00
quintal 4850.00
quintal 4950.00
quintal 5400.00

kg 54.00

kg 90.00
quintal 4850.00

sqm 280.00

each 32.00
quintal 5100.00

sqm 430.00

10 Nos 38.00

10 Nos 120.00

each 9.00

10 Nos 10.00
each 25.00
each 80.00
quintal 5500.00
each 25.00

each 20.00

each 6.00
quintal 5200.00
quintal 5300.00
each 37.00
metre 27.00
metre 90.00
metre 20.00
each 80.00
100 Nos 5000.00
cum 1100.00
cum 600.00
cum 1100.00
10 cudm 80.00
10 cudm 205.00
sqm 800.00
sqm 230.00
sqm 250.00
sqm 220.00
sqm 320.00
sqm 250.00
sqm 260.00
sqm 280.00
cum 800.00
cum 900.00
cum 700.00

10 cudm 1100.00

10 cudm 880.00
10 cudm 850.00
10 cudm 776.00
10 cudm 791.00
10 cudm 440.00
10 cudm 431.00
10 cudm 500.00
10 cudm 300.00
10 cudm 260.00
10 cudm 260.00
10 cudm 600.00

10 cudm 650.00
sqm 285.00
sqm 265.00
sqm 245.00
sqm 409.00
100 Nos 21.00
100 Nos 30.00
100 Nos 35.00
100 Nos 21.00
100 Nos 32.00
kilogram 35.00
cm 2.00
cm 2.00
quintal 600.00
kg 75.00
each 50.00
kilogram 58.00
sqm 42.00
quintal 6100.00
each 120.00
sqm 150.00
quintal 4800.00
quintal 4120.00
sqm 275.00
sqm 300.00
sqm 260.00
10 cudm 150.00
 metre 135.00
litre 80.87

metre 10.00

10 cudm 150.00
sqm 1000.00
sqm 3209.00
kg 84.00
sqm 2049.00
kg 8.70
kg 13.00
litre 18.00
kg 160.00
kg 223.00
kg 535.00
kg 500.00
metre 0.14
kg 28.00

kg 34.00

each 30.00
750 ml 600.00

metre 90.00

kg 40.00

sqm 75.00

quintal 1800.00
each 125.00
each 210.00
each 250.00
pair 88.00

each 200.00

each 40.00
each 40.00
each 50.00
each 67.50
each 30.00
each 27.00
each 35.00
each 37.00
each 44.00
each 50.00
each 210.00
each 225.00
each 210.00
each 225.00
each 30.00
each 480.00
each 477.00
each 1400.00
each 910.00
each 4400.00
each 2300.00
each 140.00
each 160.00
each 220.00
pair 100.00
each 40.00
each 55.00
each 65.00
each 25.00

each 16.00
each 18.00
each 20.00
each 20.00
each 25.00
each 40.00
each 45.00
each 50.00
each 73.00
each 92.00
each 110.00
each 125.00
each 450.00
each 950.00
kg 210.00
quintal 3800.00
quintal 3800.00
quintal 5700.00
quintal 5250.00
metre 340.00

each 310.00

each 425.00

each 525.00

each 610.00

each 190.00
each 275.00
each 310.00
each 450.00
metre 95.00
metre 130.00
metre 196.00
metre 225.00
metre 290.00
metre 360.00
 metre 415.00
metre 525.00
each 18.00
each 25.00
each 65.00
each 452.00
each 70.00

each 1050.00

each 1135.00

each 1750.00

each 210.00
each 280.00
each 475.00
each 290.00
each 350.00
each 315.00
each 405.00
each 390.00
each 455.00
each 410.00
each 615.00
each 525.00
each 730.00
each 215.00
each 265.00
each 35.00
each 55.00
each 115.00
each 145.00
each 230.00
each 310.00
each 525.00
each 575.00

per litre 6.10

each 525.00

each 575.00

each 625.00

each 725.00

each 300.00
each 355.00
each 350.00

each 435.00

each 425.00
 each 550.00

each 500.00

each 600.00

each 285.00
each 485.00
each 180.00
each 270.00

each 30.00

each 35.00

each 35.00

each 48.00

each 700.00
metre 210.00
metre 220.00
metre 365.00
metre 450.00
metre 775.00
metre 950.00
metre 1150.00
metre 1500.00
metre 1825.00
metre 2550.00
metre 2950.00
metre 3250.00
metre 3575.00
each 35.00
each 37.00
each 55.00
each 56.00
each 110.00
each 120.00
each 145.00
each 160.00
each 225.00
each 240.00
each 295.00
each 315.00
each 375.00
metre 1500.00
metre 2000.00
metre 3175.00
metre 3915.00
metre 5200.00

metre 9450.00
metre 1750.00
metre 2350.00
metre 4500.00
metre 5570.00
metre 6510.00
metre 13650.00
each 70.00
each 125.00
each 200.00
each 300.00
each 350.00
each 525.00
each 1300.00
each 1500.00
each 2500.00
each 410.00
each 325.00
each 110.00
each 125.00
kg 25.00
kg 55.00
each 625.00
each 270.00
each 280.00
each 325.00

each 190.00

each 225.00

each 315.00
each 325.00
each 300.00
each 220.00
each 115.00
each 155.00
each 230.00
each 470.00
each 1053.00
each 215.00
each 240.00
each 230.00
each 325.00
each 375.00
each 415.00
each 500.00

each 625.00
each 1080.00
each 1625.00
each 350.00
each 475.00
each 575.00
each 840.00
 each 1525.00
each 2300.00
each 2450.00
each 2610.00
each 3650.00
each 7600.00
each 10980.00
each 15500.00
each 725.00
each 725.00
each 425.00
each 85.00
each 100.00
each 475.00
each 1290.00
each 1025.00
each 11.50
each 13.00
each 15.00
each 17.50
each 17.00
each 17.00
each 27.00
each 31.00
each 37.00

each 2500.00

each 9800.00

pair 103.00
cum 11.00
1000 Nos 4600.00
1000 Nos 5200.00
tonne 187.35
1000 Nos 437.15
cum 163.93
cum 163.93
cum 187.35

tonne 145.72
cum 178.19
1000 Nos 262.29
cum 163.93
tonne 145.72
tonne 163.93
cum 192.86
tonne 145.72
100 metre 218.58
100 metre 437.15
100 metre 728.59
100 metre 1249.01
100 metre 1561.26
 cum 204.92
cum 178.19
cum 178.19
cum 163.93
cum 163.93
cum 163.93
cum 163.93
cum 163.93
cum 163.93
cum 163.93
tonne 145.72
tonne 145.72
tonne 145.72
100 metre 358.32
100 metre 597.20
100 metre 1380.48
100 metre 1706.30
100 metre 3981.36
tonne 145.72
100 metre 5972.04
tonne 145.72
tonne 145.72
cum 163.93
tonne 145.72
cum 178.19
100 metre 358.32
100 metre 478.64
100 metre 597.20
100 metre 971.45
100 metre 1380.48
100 metre 1706.30
100 metre 2388.82
100 metre 3257.48

100 metre 3981.36

100 metre 3981.36
100 metre 5972.04
100 metre 3981.36
100 metre 8958.06
100 metre 11944.08
100 metre 11944.08
100 metre 11944.08
cum 163.93
100 metre 11944.08
tonne 145.72
quintal 16.39
100 metre 358.32
100 metre 597.20
100 metre 971.45
100 metre 1380.48
100 metre 1706.30
100 metre 2388.82
100 metre 3257.48
100 metre 3981.36
100 metre 3981.36
100 metre 5972.04
100 metre 5972.04
100 metre 5972.04
100 metre 8958.06
100 metre 11944.08
tonne 17700.00
metre 286.00
metre 381.00
kg 286.00
each 31.00
each 41.00
each 72.00
each 83.00
each 114.00
metre 2912.00
metre 3328.00
metre 4160.00
kg 156.00
metre 3193.00
metre 4120.00
metre 5562.00

sqm 309.00

sqm 515.00

sqm 628.00

metre 2472.00
metre 2884.00
metre 3468.00
sqm 306.00
sqm 510.00
sqm 775.00
sqm 6120.00
metre 36.00

each 62.00

each 57.00
each 88.00
each 93.00
each 108.00
each 77.00

each 686.00

each 20.00

each 48.00

each 33.00
10 cudm 357.00
each 172.00

each 63.00
each 73.00
each 99.00
each 125.00
sqm 884.00

sqm 905.00

sqm 1010.00

sqm 469.00

sqm 609.00

sqm 877.00

sqm 439.00

sqm 582.00
metre 21.00
metre 134.00
sqm 2153.00
metre 32.00
each 6.00

sqm 650.00

sqm 455.60

sqm 1500.00

sqm 1450.00

10 cudm 113.00
cum 772.00
10 cudm 402.00

10 Nos 270.00

10 Nos 312.00

10 Nos 380.00
 10 Nos 468.00

10 Nos 598.00
1000 Nos 4590.00
1000 Nos 4080.00

each 543.00
metre 31.00
metre 21.00
each 332.00
each 102.00
kg 104.00
kg 484.00
kg 156.00

each 11.00

each 37.00

each 4.00
metre 22.00
kg 61.00
sqm 1030.00
sqm 670.00
each 132.00
pair 1390.00
each 36.00
each 87.00
each 36.00
each 260.00
each 122.00
sqm 255.00
each 7.00
cartridge 125.00
sqm 245.00
metre 6.00
sqm 1100.00
metre 480.00
kg 55.00

each 3.15

each 3.10

sqm 180.00

sqm 25500.00
metre 250.00
metre 400.00
kg 240.00
sqm 510.00
quintal 145.00

quintal 160.00

each 740.00
each 145.00
each 210.00
each 70.00
each 3.00
sqm 690.00
sqm 400.00
sqm 460.00

sqm 525.00
sqm 550.00
sqm 750.00
sqm 700.00
sqm 500.00
sqm 700.00
sqm 650.00
sqm 880.00
sqm 1200.00
sqm 480.00
sqm 700.00
sqm 650.00
sqm 880.00
sqm 1400.00
cum 1360.00
cum 1360.00
cum 1400.00
cum 1400.00
cum 550.00
cum 600.00
cum 1200.00
cum 1200.00
kg 30.00
tonne 24500.00
sqm 45.00
each 45.00
quintal 6000.00

sqm 549.00

sqm 698.00

sqm 895.00
 sqm 730.00

sqm 924.00

sqm 1182.00

sqm 520.00

sqm 670.00

sqm 870.00

sqm 636.00

sqm 809.00

sqm 1038.00

sqm 846.00

sqm 1071.00

sqm 1370.00

sqm 680.00

sqm 872.00

metre 564.00

metre 544.00

metre 584.00
metre 487.00
sqm 538.00
 metre 725.00

100 Nos 500.00

100 Nos 40.00

each 40.00

each 400.00
each 550.00
each 750.00

each 950.00
each 1550.00
each 1100.00

each 300.00

each 550.00
each 2600.00
each 2700.00
each 3300.00
each 4100.00
each 8900.00
each 15000.00
each 18500.00
each 6000.00
each 210.00

each 1170.00

each 1150.00

each 400.00
each 300.00
each 300.00
each 200.00
each 300.00
each 280.00
each 500.00
each 350.00
each 500.00
each 390.00
each 630.00
each 470.00

each 630.00

each 500.00
each 600.00
each 650.00
each 800.00

each 900.00

each 430.00

each 330.00
each 540.00

each 450.00

each 550.00

each 730.00

each 230.00
each 300.00
each 400.00
each 310.00
each 390.00
each 360.00
each 460.00
each 410.00
each 300.00
each 300.00
each 210.00
each 300.00
each 180.00
each 220.00
each 360.00
each 110.00
each 9100.00
each 5100.00

metre 310.00

metre 500.00

metre 650.00

metre 945.00

metre 1160.00

metre 1500.00

each 215.00

each 270.00

each 315.00

each 395.00

each 535.00

each 640.00

each 255.00
each 375.00

each 310.00

each 380.00

each 470.00

each 690.00

each 720.00

each 605.00

each 990.00

each 1030.00

each 835.00

each 375.00

each 450.00

each 520.00

each 580.00

each 670.00

each 955.00

each 305.00

each 430.00

each 575.00

each 940.00

each 1520.00

each 2010.00

each 500.00

each 585.00

each 720.00
each 895.00

each 1250.00

each 1500.00

each 575.00

each 715.00

each 710.00

each 900.00

each 905.00

each 915.00

each 1280.00

each 1265.00

each 1290.00

each 1570.00

each 1540.00

each 1550.00

each 1500.00

each 560.00

each 615.00

each 690.00

each 730.00

each 755.00

each 840.00

each 845.00
each 1159.00

each 1346.00

each 1920.00

each 2307.00

each 440.00

each 495.00

each 580.00

each 955.00

each 1020.00

each 1565.00

each 2400.00

each 405.00

each 480.00

each 505.00

each 665.00

each 970.00

each 1415.00
each 1895.00

each 640.00

each 860.00

each 1180.00

each 1917.00

each 2088.00

each 3227.00

each 525.00

each 790.00

each 1045.00

each 1440.00

each 2635.00

each 2998.00

each 320.00

each 415.00

each 515.00

each 720.00

each 1565.00
each 1720.00

each 415.00

each 1110.00

each 1526.00

each 885.00

each 895.00

each 1025.00

each 1805.00

each 1885.00

each 2130.00

each 3680.00

each 950.00

each 1280.00

each 649.00

each 900.00

each 870.00

metre 70.00

metre 75.00
 3993 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series
casement door sash metre 100.00
3994 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series

sliding window / door sash

3995 G.I fasteners 100 x 8 mm
Stainless steel (Grade-304)hollow section round/square tubes
0004 Production cost of concrete by batch mix plant

4002 Stainless steel bolts/square bar and plates

4006 Pressed steel door frames (mild steel sheet 1.60 mm) Profile "B"
4007 Pressed steel door frames (mild steel sheet 1.60 mm) Profile "C"
4008 Pressed steel door frames (mild steel sheet 1.60 mm) Profile "E"
4009 Mild steel tubes hot finished welded type
4010 Mild steel tubes hot finished seamless type
4011 Mild steel tubes electric resistant or induction butt welded
4012 Circular C.I. Box for ceiling fan internal dia 140 mm, 73 mm height, toplid of 1.5mm thick
MS sheet
4013 Pulley 40 mm dia
4201 Aluminium primer
4202 Red oxide Zinc chromate primer
4203 Copper acetate
4204 Hydrochloric acid
4205 Copper chloride
4206 Copper nitrate
4207 Ammonium chloride
5001 Mobil oil
5050 SS pipe 304 grades with press fit technology as per JIS 3448 Standard
48.60 mm outer dia
5743 Coloured inter locking C.C. paver Block
5744 EPS blocks
5745 GI woven mesh of aperture 5.45 mm (with wire of dia 0.90 mm
5746 SR adhesive for joining EPS blocks
5747 Factory made single extruded WPC (Wood Polymer Composite) solid door/window,
clerestory windows & other Frames/Chowkhat of frame size 45 x 70 mm

5748 Factory made single extruded WPC (Wood Polymer Composite) solid door/window,
clerestory windows & other Frames/Chowkhat of frame size 45 x 85 mm

5749 Factory made single extruded WPC (Wood Polymer Composite) solid door/window,
clerestory windows & other Frames/Chowkhat of frame size 50 x 100 mm

5750 Factory made single extruded WPC (Wood Polymer Composite) solid door/window,
clerestory windows & other Frames/Chowkhat of frame size 50 x 125 mm

5751 Factory made single extruded WPC (Wood Polymer Composite) solid door/window,
clerestory windows & other Frames/Chowkhat of frame size 65 x 100 mm

5752 Factory made single extruded WPC (Wood Polymer Composite) solid door/window,
clerestory windows & other Frames/Chowkhat of frame size 65 x 125 mm
100.00

metre 90.00
each 15.00
kg 230.00
kg 120.00
metre 200.00
metre 220.00
metre 250.00
kg 60.00
kg 70.00
kg 50.00

each 55.00

each 35.00
litre 120.00
litre 120.00
kg 300.00
kg 35.00
kg 300.00
kg 210.00
kg 22.00
litre 318.00

metre 680.00

sqm 500.00
kg 150.00
kg 60.00
kg 180.00

metre 375.00

metre 525.00

metre 540.00

metre 630.00

metre 650.00

metre 835.00
5753 Factory made single extruded WPC (Wood Polymer Composite) solid door/window,
clerestory windows & other Frames/Chowkhat of frame

size 65 x 150 mm
5754 Factory made single extruded WPC (Wood Polymer Composite) solid
plain flush door shutter 30mm thick
Factory made single extruded WPC (Wood Polymer Composite) solid
0004 Production cost of concrete by batch mix plant

plain flush door shutter 35 mm thick

5756 Factory made single extruded WPC (Wood Polymer Composite) solid
plain white colored board of 18 mm thick
5757 Factory made single extruded WPC (Wood Polymer Composite) solid
plain white colored board of 25 mm thick
5758 Factory made single extruded WPC (Wood Polymer Composite) solid
plain white colored board of 6 mm thick
5759 Factory made single extruded WPC (Wood Polymer Composite) solid
plain white colored board of 12 mm thick
5760 Factory made 18 mm thick single extruded WPC (Wood Polymer
Composite) solid plain white colour board Jali
5761 PVC laminated foil of minimum thickness of 14 microns of approved
design
5762 16mm thick extruded terracotta tiles of grey colour of size 300 x 595mm
5763 16mm thick extruded terracotta tiles of other than grey colour of size
300 x 595mm
5764 24mm thick extruded terracotta tiles of grey color of size 309x1190 mm and length
1190mm
5765 24mm thick extruded terracotta tiles of grey color of size 309x1190 mm
and length 1190mm
5766 Melamine wood sealer
5767 Melamine solvent/thinner
5768 Sanding cloth 150 mm wide
5769 Sandpapers of assorted gratings
5770 Melamine wood filler putty
5771 Dhoti (worm out soft cotton cloth)
5772 Grease
5773 Shutttering oil
5774 GP-2 cementeous compound
5775 Galavinised MS L-shape level adjuster of size 76x25x25x1.6 mm
5776 12x50 mm long dash fastener
5777 Galvanized MS Z Cleat of size 25 x 37 x 25 x 1.6 mm with precut hole on
both 25 mm flange
5778 15mm tegular/butt edged without perforation plain/designer light weight
calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles of
size 595x595 mm
5779 Grinding buffers
5780 4mm thick sheet of aluminium alloy grade 6061 (type-6) for aluminuum
formwork
5781 Fabrication cost for formwork panels and special including computerised
designing for fabrication and mock testing before transportation to site
of work.
5782 Packaging and carting of aluminium sheet/plate to the site of work
5783 MS working platform for aluminium formwork

6001 White marble slab Makrana second quality plain veined 18 mm thick
6007 Pink marble slab plain 18 mm thick
6010 Udaypur green marble slab plain 18 mm thick
6019 Black Zebra marble slab plain 18 mm thick
6501 Sand zone V (Jamuna)
7001 Brass 100mm mortice latch and lock with 6 levers without pair of handles

7003 Pair of Anodised Aluminium lever handles for 100 mm mortice latch and lock

7004 Vitreous china flat back wash basin 450x300 mm

7005 Vitreous china 10 litres low level cistern without fittings
7006 Vitreous china 10 litres low level cistern with fittings
7008 F.P.S. (non modular) clay fly ash bricks class designation 7.5
7009 12.5 mm thick tapered edge plain gypsum plaster borad confirming to IS 2095 (Part
1):2011
7010 Galvanised Steel ceiling section (size 80x26x0.50 mm)
7011 Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm)
7012 Galvanised Steel intermediate Channel (Size 15x45x15x0.90 mm)
7013 Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50 mm)
7014 Galvanised Steel connecting clips (2.64 mm dia and 230 mm long GI wire)

7015 Galvanised Steel soffit cleat (Size 27x37x25x0.60 mm)

7016 Joint filler
7017 Joint finisher
7018 Joint tape roll
7019 Dash fastener / Chemical fastener
7020 All drive screws (for gypsum board)
7021 Primer (for gypsum board)
7022 Chlorpyriphos 20% E.C. / Lindane 20% E.C.
7023 Chromium plated brackets (curtain rods)
7024 Acid Proof cement
7025 Self tapping pan head nickel coated mild steel screws of size 13 x
3.2 mm
7026 Fibre joint tape 50 mm wide (90 metre) roll
7027 M.S. Butt hinges 125x90x4 mm
7028 12.5 mm thick Fully Perforated gypsum board
7029 Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63
mm
7031 12.5 mm thick tapered edge moisture resistant plain gypsum plaster board
confirming to IS 2095 (Part 1):2011
7032 Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm)

7033 Nickel plated M.S. pipe 25 mm dia

7034 Nickel plated M.S. pipe 20 mm dia
7035 Nickel plated M.S. Brackets for curtain rod 20 mm
7036 Nickel plated M.S - Brackets for curtain rod 25 mm
7040 Oxidised mild steel screws 35 mm

7042 Mild steel conduit pipe (heavy type) ISI marked-20 mm dia
7043 Mild steel conduit pipe (heavy type) ISI marked-25 mm dia
7044 Rolling shutters of 80x0.90 mm laths
7045 Rolling shutters of 80x1.2 mm laths
7046 Top cover of Rolling shutters 0.90 mm thick
7047 Top cover of Rolling shutters 1.20 mm thick
7048 Rawl plug 50 mm (designation 10 nos)
7049 Teak wood lipping of size 25x3 mm in pelmets
7050 PU Primer
7051 40 mm (average) PU spray having 40-45 kg/m3 density
7052 GI wire netting 3/4" x 24 G
7053 400 G polythene sheet
7055 Flat pressed 3 layer and graded particle board (medium density) Grade 1 conforming to IS
: 3087 - 18 mm thick
7056 Aluminium tee channel (heavy duty) with rollers and stop end
7059 Aluminium hanging floor door stopper with twin rubber & stopper
7060 Hydraulic door closer tubular type Aluminium section body
7063 Oxidised M.S.casement stay (straight peg type) 300 mm not less than
0.20 kg
7064 Oxidised M.S.casement stay (straight peg type) 250 mm not less than
0.15 kg
7065 Oxidised M.S. casement stay (straight peg type) 200 mm not less than
0.12 kg
7068 Extra for providing grilled rolling shutters with 8 mm dia M.S. rod
7070 Chequered precast cement concrete tiles 22 mm thick using marble chips of size 6mm -
Light shade using white cement
7071 White marble Raj Nagar plain 18 mm thick upto 0.50 sqm area
7072 Wall mounted water closet of size 780 x 370x690 mm
7073 Adjustable Vitreous China Cistern with fittings of flushing capacity 3 litre/ 6litre 9adjustibla
to 4 litre/8litre)
7074 White Vetrious China Waterless Urinal of size 600x330x315 mm
7075 Cistern with fittings for Waterless Urinal
7076 Battery based infrared sensor operated white Vitreous Urinal of aprox. size 610x390x370
mm
7077 Acid and alkali resistant tiles 300x300 mm size, 10 mm thick
7087 S.C.I. Tee 150 mm
7090 Expanded polystyrene type N- Normal 50 mm thick
7091 Expanded polystyrene type - SE 50 mm thick
7095 Stainless steel kitchen sink - with drain board 510x1040 mm bowl depth 250 mm

7096 Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 225 mm

7097 Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 200 mm

7098 Stainless steel kitchen sink - with drain board 510x1040 mm bowl depth 178 mm

7101 Stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm

7102 Stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm

7103 Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

7104 Coloured Orissa pattern W.C. pan 580x440 mm

7105 Coloured Pedestal type W.C. pan 580x440 mm (European type)
7106 Coloured Vitreous china 10 lit. low level cistern
7107 Coloured (other than black) solid P.V.C. seat in European W.C. pan
7112 Circular shape 450 mm dia Mirror with Plastic moulded frame
7113 Rectangular shape 453x357 mm Mirror with Plastic moulded frame
7114 Oval shape 450x350 mm (outer dimensions) Mirror with Plastic moulded frame

7115 Rectangular shape 1500x450 mm Mirror with Plastic moulded frame

7116 Hard board 6 mm thick
7117 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than
700 mm i/c PVC waste fittings
7118 Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than
700 mm i/c PVC waste fittings
7119 Flexible (coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length not
less than 700 mm i/c PVC waste fittings
7120 Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not
less than 700 mm i/c PVC waste fittings
7121 Bottle Trap
7122 CP Brass Single lever telephonic wall mixer of approved make
7123 Coloured High density polyethylene / poly propylene 10 lit. (full flush) capacity controlled
low level flushing cistern with fittings
7126 White Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern with
all fittings
7127 Coloured Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern
with all fittings
7128 S.W. intercepting trap 100 mm dia
7129 S.W. intercepting trap 150 mm dia
7130 Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame - L.D. - 2.5

7131 Square shape 450x450 mm precast R.C.C. manhole cover with frame -
L.D. - 2.5
7132 Circular shape 450 mm dia precast R.C.C. manhole cover with frame -
L.D. - 2.5
7133 Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D. - 10

7134 Circular shape 500 mm dia precast R.C.C. manhole cover with frame- M.D.-10

7135 Circular shape 560 mm dia precast R.C.C. manhole cover with frame -
H.D. - 20
7136 Circular shape 560 mm dia precast R.C.C. manhole cover with frame -
E.H.D. - 35
7137 Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as
per TADS 15:1995 and panels of 12 mm thick plain type-I, medium density flat pressed
three layer, graded particle board (FPT-I) as per IS:3087 bonded with BWP type synthetic
resin adhesive,

as per IS:848
7139 Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as
per TADS 15:1995 and panels of 12 mm thick both sides prelaminated type-I, medium
density flat pressed three layer, graded particle board (FPT-I) as per IS:3087 bonded
with BWP type synthetic resin adhesive, as per IS:848

7143 Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as
per TADS 15:1995 and panels of 12 mm thick one side prelaminated type-I, and other
side balancing lamination, medium density flat pressed three layer, graded particle board
(FPT-
I) as per IS:3087 bonded with BWP type synthetic resin adhesive, as per IS:848
7151 Factory made 30 mm thick shutters with laminated veneer lumber styles & rails as
per TADS 15:1995 and panels of sheet glass using 10 kg/ sqm glass panes

7154 Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as
per TADS 15:1995 and panels of galvanised wire gauge with average width of
aperture 1.4 mm in both directions with wire of dia 0.63 mm

7155 Factory made 30 mm thick shutters with laminated veneer lumber styles & rails as
per TADS 15:1995 and panels of galvanised wire gauge with average width of
aperture 1.4 mm in both directions with wire of dia 0.63 mm

7157 Laminated veneer lumber confirming to TADS 15:1995 manufactured in factory in frames
of doors, windows
7178 Chemical ASTMC-type I
7181 C.I. pile shoe
7182 M.S. clamps for pile shoe of 35 kg per pile
7183 Bentonite of 35 kg per pile
7184 Oxidised M.S. safety chain (weighing not less than 450 gms) for door
7187 C.I. grating 150 mm dia, weighing not less than 440 gm
7188 U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia

7189 U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia

7190 U-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 75 mm dia

7191 U-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 110 mm dia

7192 uPVC coupler for UPVC drainage pipes 75 mm

7193 uPVC coupler for UPVC drainage pipes 110 mm
7194 uPVC pushfit coupler (single) 75 mm thick
7195 uPVC pushfit coupler (single) 110 mm thick
7196 uPVC single equal Tee (without door) 75x75x75 mm
7197 uPVC single equal Tee (without door) 110x110x110 mm
7198 uPVC single equal Tee (with door) 75x75x75 mm
7199 uPVC single equal Tee (with door) 110x110x110 mm

7208 UPVC bend 87.5° 75 mm bend

7209 UPVC bend 87.5° 110 mm bend
7212 UPVC plain shoe 75 mm
7213 UPVC plain shoe 110 mm
7214 UPVC pipe clip 75 mm
7215 UPVC pipe clip 110 mm
7216 Self-Drilling/Self-Tapping Screws M-6 25mm long
7217 SS anchor Fasteners (RCC / Brick) – M-8x75mm/M-10x100mm
7218 MS Polymer Sealant Adhesive
7219 SS Double Clip at intermediate
7220 SS Single clip at top and bottom
7221 Self-Drilling/Self-Tapping Screws 5.5x25 mm long
7222 SS Anchor Fasteners (RCC / Brick) – M-8x100 mm
7224 Concrete hardener
7225 Release agent
7226 Sealer
7227 PU resin top coat
7231 Resin Bonded Glass wool 16 kg/m³ : 50 mm thick
7232 Resin Bonded Glass wool 24 kg/m³ : 50 mm thick
7233 Fibre glass tissue reinforcement Type II Grade i
7236 Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement

7237 Precast chequered cement tiles 22 mm thick medium shade using 50% white
cement 50% ordinary cement
7238 High Albedo paint
7239 Epoxy paint
7240 Fire retardant paint
7241 Melamine polish
7244 Table rubbed polished stone 18 mm thick (75x50cm) Agaria Marble stone - 18 mm thick

7245 Table rubbed polished stone 18mm thick (75x50cm) Granite stone- 18 mm thick

7246 Vertical load testing (initial) of piles in accordance with IS : 2911 (Part-IV) including
installation of loading platform and preparation of pile head or construction of test cap and
dismantling of test cap after test etc. complete as per specification and up to 50 tonne
capacity pile

7247 Vertical load testing (initial) of piles in accordance with IS : 2911 (Part-IV) including
installation of loading platform and preparation of pile head or construction of test cap and
dismantling of test cap after test etc. complete as per specification & above 50 tonne and
up to 100 tonne

7248 Vertical load testing (initial) of piles in accordance with IS : 2911 (Part-IV) including
installation of loading platform and preparation of pile head or construction of test cap and
dismantling of test cap after test etc. complete as per specification & group of two or more
up to 50 tonne

7249 Cyclic vertical load testing of piles in accordance with IS : 2911 (Part-
IV) including preparation of pile head etc. for Single pile up to 50 tonne capacity

7250 Cyclic vertical load testing of piles in accordance with IS : 2911 (Part-
IV) including preparation of pile head etc. for Single pile above 50 tonne capacity pile and
up to 100 tonne capacity pile

7251 Cyclic vertical load testing of piles in accordance with IS : 2911 (Part-
IV) including preparation of pile head etc. for Group of two piles up to 50 tonne capacity
each

7252 Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining safe
allowable lateral load on pile up to 50 tonne capacity

7253 Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining safe
allowable lateral load on pile above 50 tonne capacity

7254 Hardening compound

7255 Road marking paint (spirit based)
7256 Superior quality road marking paint (water based)
7257 C.P. Brass bibcock 15 mm
7258 C.P. Brass long nose bibcock 15 mm
7259 C.P. Brass long body bibcock 15 mm
7260 C.P. Brass stop cock (concealed) 15 mm
7261 C.P. Brass angle valve 15 mm
7266 Pressed clay tiles 20mm thick 250x250 mm size
7267 Plain ceiling tiles (BWP type phenol formaldehyde synthetic resin bonded) (600x600x12
mm)
7268 Semi perforated ceiling tiles (600x600x12 mm)
7269 25 mm thick particle board
7270 30 mm thick prelaminated flush door shutter
7271 Second class teak wood lipping 25 mm wide x 12 mm thick
7272 25 mm thick melamine faced prelaminated three layer particle board
7273 Resin Bonded Rockwool 48 kg/m3
7274 Glass wool 50 mm thick
7280 Waste plastic additive
7281 Chemical ASTMC-type II
7295 Granite of colour black, cherry/ruby red 18 mm thick (slab area upto
0.50 sqm)
7296 Granite of colour black, cherry/ruby red 30 mm thick (slab area upto
0.50 sqm)
7297 Granite of all colour except black, cherry/ruby red 18 mm thick (slab area upto 0.50 sqm)

7298 Granite of colour black, cherry/ruby red 18 mm thick (slab area above
0.50 sqm)
7299 Granite of all colour except black, cherry/ruby red 18 mm thick (slab area above 0.50
sqm)
7300 Granite of all colour except black, cherry/ruby red 30 mm thick (slab area above 0.50
sqm)
7306 Aluminium T or L sections
7307 For flush door shutters Extra for providing teak veneering on one side instead of
commercial veneering

7309 Paving Asphalt of grade VG-30 of approved quality

7312 Expandable fastener with plastic sleeve and M.S. screws : 25 mm long
7313 Expandable fastener with plastic sleeve and M.S. screws : 32 mm long
7314 Expandable fastener with plastic sleeve and M.S. screws : 40 mm long
7315 Expandable fastener with plastic sleeve and M.S. screws. 50 mm long
7318 Plasticizer / super plasticizer
7319 Wall form panel 1250x500 mm
7320 Tie bolt 12 mm dia 100 mm length
7321 Tie bolt 12 mm dia 150 mm length
7322 Tie bolt 20 mm dia 150 mm length
7323 Tie bolt 20 mm dia 225 mm length
7324 Spring coil 12 mm
7325 Plastic cone 12 mm dia
7326 Corner angle 45x45x5 mm 1.50 m long
7327 100 mm channel shoulder 2.5 m long
7328 Double clip (bridge clip)
7329 Single clip
7330 M.S. tube 40 mm dia
7331 Wall form panel 1250x450 mm
7332 Corner angle 45x45x5 mm 2.50 m long
7333 Column clamp 450x1070 mm
7334 Prop 2 m ( 2-3.5 m)
7335 Binding wire
7336 Lock Bar (E 250) - 10 thick MS Plate
7338 Gun metal cramp
7339 Stainless steel cramp
7340 Stainless steel pin
7342 Adjustable span ESO+SI (2.35-3.40)
7343 Adjustable telescopic prop 3 m (2.02-3.75 m)
7344 Beam clamp 300-380 mm (450-1070 mm)
7345 Prop 4 m
7346 Double coupler
7347 Cadmium plated full threaded steel screws (30x4 mm dia)
7348 Aluminium washer 2 mm thick 15 mm dia
7349 12 mm M.S. 'U' beading
7354 Plastic encapsulated M.S. foot rest 30x20x15 cm
7358 Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and
flush pipe)
7359 P.V.C. automatic flushing cistern 5 litre capacity
7361 P.V.C. automatic flushing cistern 10 litre capacity
7363 15 mm C.P. brass tap with elbow operation lever
7364 White glazed fire clay draining board 600x450x25 mm
7366 Glass reinforced Gypsum ( GRG) plaster board 12.5 mm thick confirming to IS 2095
(Part 3):1996
7367 Galvanised M.S. sheet 0.5 mm thick pressed channel section of size 50x32 mm

7368 GFRG Panel of 124 mm thick

7369 Galvanised M.S. sheet 0.50 mm thick pressed stud : 48x34x36 mm
7375 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single lipped
urinal
7376 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of two
lipped urinals
7377 G.i. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of three
lipped urinals
7378 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of four
lipped urinals
7379 White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back
450x375x350 mm with waste fittings as per IS:2556
7380 Precast R.C.C. grating with frame 500x450 mm horizontal grating
7381 Precast R.C.C. grating with frame 450x100 mm vertical grating
7382 Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887
7383 12 mm dia 50 mm long wedge type expanded zinc alloy dash fastener
7385 3 mm thick translucent white acrylic plastic sheet
7386 12 mm thick particle board ceiling tile
7387 Spigot for standard jointing
7388 Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt
7389 Anodising 15 microns on aluminium sections
7390 EPDM Gasket for uPVC window/door
7391 Anodising 25 microns on aluminium sections
7392 Powder coating 50 microns on aluminium sections
7393 Polyester powder coating 50 microns on aluminium sections
7394 Double action hydraulic floor spring with stainless steel cover plate
7395 6 mm dia G.I. adjustable hangers including clips (up to 1.2 m length)
7396 Double action hydraulic floor spring with brass cover plate
7397 Base Jack
7398 Challies
7399 Cup locks
7400 15 mm PTMT bib cock
7401 15 mm PTMT bib cock with flange (fancy)
7402 15 mm PTMT bib cock long body with flange
7403 15 mm dia PTMT stop cock (male thread)
7405 20 mm dia PTMT stop cock
7406 PTMT pillar cock
7407 PTMT push cock 15 mm dia
7408 PTMT push cock 12 mm dia 20 mm BSP
7409 PTMT grating 100 mm dia
7410 PTMT Pillar cock (fancy) 15 mm foam flow
7411 125 mm grating with waste hole
7412 Rectangular type with openable circular lid 150 mm size 18 mm high with 100 mm dia
(110 gm)
7415 Double acting air valve 50 mm
7416 Double acting air valve 80 mm

7417 Double acting air valve 100 mm

7418 Water meter (including testing charges) 80 mm
7419 Water meter (including testing charges) 100 mm
7420 Water meter (including testing charges) 150 mm
7421 Water meter (including testing charges) 200 mm
7422 Dirt box strainer 80 mm
7423 Dirt box strainer 100 mm
7424 Dirt box strainer 150 mm
7425 Dirt box strainer 200 mm
7426 Cat's eye
7427 Water stops Serrated with central bulb (225 mm wide, 8-11 mm thick)
7428 Water stops Dumb bell with central bulb
7429 Kickers
7430 Wedge expansion hold fastener 1/4" or 6 mm
7431 Wedge expansion hold fastener 3/8" or 10 mm
7432 Wedge expansion hold fastener 1/2" or 12 mm
7439 8mm thick (mirror polished tiles machine cut edge) Raj Nagar white
7442 Wheel 75 mm dia. 40 mm wide
7443 Aluminium single cleat of size 30x32x3 mm
7444 Aluminium grip strip of size 50x12x2 mm
7445 25 mm thick prelaminated flush door shutter both side decorative
7449 Aluminium U beading
7451 Glass sheet (Pin headed) 4 mm thick
7452 Raj nagar plain white marble (table rubbed and polished) 18 mm thick (slab area upto
0.50 sqm)
7453 Raj nagar plain white marble (table rubbed and polished) 18 mm thick (slab area more
than 0.50 sqm)
7466 Second class deodar teak wood lipping 30 mm wide x 12 mm thick
7468 Veneered particle board with commercial veneering on both sides 12 mm thick

7477 Prelaminated particle board with one side decorative and other side balancing lamination,
flat pressed 3 layer & graded (medium density) Grade i, Type II conforming to IS : 12823
(exterior grade) 12 mm thick
7478 Prelaminated particle board with one side decorative and other side balancing lamination,
flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823
(exterior grade) 18 mm thick

7479 Prelaminated particle board with one side decorative and other side balancing lamination,
flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823
(exterior grade) 25 mm thick

7480 Prelaminated particle board with both sides decorative lamination, flat pressed 3 layer
& graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade) 12
mm thick

7485 Oxidised M. S. hinges finished with nickel plating 50 mm (Over all width)
7486 Oxidised M. S. hinges finished with nickel plating 65 mm (Over all width)
7491 PTMT - Waste Coupling 31/32 mm
7492 PTMT - Waste Coupling 38/40 mm
7493 PTMT - Bottle Trap 31/32 mm

7494 PTMT - Bottle Trap 38/40 mm

7495 PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod &
H.D. Ball
7496 PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod &
H.D. Ball
7497 PTMT Ball Cock 25mm complete with Epoxy Coated Aluminium Rod &
H.D. Ball
7498 PTMT Ball Cock 40mm complete with Epoxy Coated Aluminium Rod &
H.D. Ball
7499 PTMT Ball Cock 50mm complete with Epoxy Coated Aluminium Rod &
H.D. Ball
7500 PTMT Angle Stop cock with Flange 15 mm
7501 PTMT Swiveling shower 15 mm
7503 PTMT Liquid Soap Container of 400 ml capacity
7504 PTMT - Towel Ring 215x200x37 mm
7505 PTMT - Towel Rail (450 mm long )
7506 PTMT - Towel Rail (600 mm long)
7507 PTMT Shelf 450x124x36 mm
7508 PTMT - Urinal Spreader 15 mm
7509 PTMT Soap Dish/Holder 138x102x75 mm
7512 PTMT handle 125x34x24 mm
7513 PTMT handle 150x34x24 mm
7514 PTMT butt hinges 75x60x10 mm
7515 PTMT butt hinges 100x75x10 mm
7516 PTMT Tower bolt 152x42x18 mm
7517 PTMT Tower bolt 202x42x18 mm
7518 PTMT door catcher 72x42 mm
7552 Coir veneered board 4 mm thick
7553 Coir veneered board 6 mm thick
7555 Coir veneered board 12 mm thick
7556 Coir veneered board 18 mm thick
7621 Hubless centrifugally cast (spun) iron pipes as per IS 15905 - 100 mm dia (3000 mm
length pipe)
7622 Hubless centrifugally cast (spun) iron pipes as per IS 15905 - 75 mm dia (3000 mm length
pipe)
7623 Hubless centrifugally cast (spun) iron plain bend as per IS 15905 - 100mm dia
7624 Hubless centrifugally cast (spun) iron plain bend as per IS 15905 - 75 mm dia

7625 Hubless centrifugally cast (spun) iron double equal plain junction as per IS 15905 -
100x100x100x100 mm dia
7626 Hubless centrifugally cast (spun) iron double equal plain junction as per IS 15905 -
75x75x75x75 mm dia
7627 Hubless centrifugally cast (spun) iron single equal plain junction as per IS 15905 -
100x100x100 mm dia
7628 Hubless centrifugally cast (spun) iron single equal plain junction as per IS 15905 -
75x75x75 mm dia
7629 Hubless centrifugally cast (spun) iron double unequal plain junction as per IS 15905 -
100x100x75x75 mm dia

7630 Hubless centrifugally cast (spun) iron single unequal plain junction as per IS 15905 -
100x100x75 mm dia
7631 Hubless centrifugally cast (spun) iron double equal plain invert branch as per IS 15905 -
100x100x100x100 mm dia
7632 Hubless centrifugally cast (spun) iron single equal plain invert branch as per IS 15905 -
100x100x100 mm dia
7633 Hubless centrifugally cast (spun) iron single equal plain invert branch as per IS 15905 -
75x75x75 mm dia
7634 Hubless centrifugally cast (spun) iron single unequal plain invert branch 45 degree
as per IS 15905 - 100x100x75 mm dia
7635 Hubless centrifugally cast (spun) iron 65 mm offset with 100 mm dia pipe as per IS 15905

7636 Hubless centrifugally cast (spun) iron 65 mm offset with 75 mm dia pipe as per IS 15905

7637 Hubless centrifugally cast (spun) iron 130 mm offset with 100 mm dia pipe as per IS
15905
7638 Hubless centrifugally cast (spun) iron 130 mm offset with 75 mm dia pipe as per IS 15905

7639 Hubless centrifugally cast (spun) iron bend with access door - 100mm dia as per IS 15905

7640 Hubless centrifugally cast (spun) iron bend with access door - 75mm dia as per IS 15905

7641 Hubless centrifugally cast (spun) iron terminal guard (slotted cowl) - 100 mm dia as per IS
15905
7642 Hubless centrifugally cast (spun) iron trap with 100 mm inlet and 100 mm outlet as per IS
15905
7643 Hubless centrifugally cast (spun) iron trap with 100 mm inlet and 75 mm outlet as per IS
15905
7644 SS 304 grade shielded coupling with EPDM rubber gasket for 100mm dia Hubless
centrifugally cast (spun) iron
7645 SS 304 grade shielded coupling with EPDM rubber gasket for 75 mm dia Hubless
centrifugally cast (spun) iron
7651 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100 mm dia
7652 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 150 mm dia
7653 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 200 mm dia
7654 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250 mm dia
7655 Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 300 mm dia
7656 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350 mm dia
7657 Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 400 mm dia
7658 Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 450 mm dia
7659 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500 mm dia
7660 Ductile Iron class K -9 pipe Conforming to I.S. 8329 - 600 mm dia
7661 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700 mm dia
7662 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750 mm dia
7663 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800 mm dia
7664 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 900 mm dia
7665 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000 mm dia

7666 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 100 mm dia
7668 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 150 mm dia
7669 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 200 mm dia
7670 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 250 mm dia
7671 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 300 mm dia
7672 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 350 mm dia
7673 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 400 mm dia
7674 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 450 mm dia
7675 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 500 mm dia
7676 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 600 mm dia
7677 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 700 mm dia
7678 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 750 mm dia
7679 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 800 mm dia
7680 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 900 mm dia
7681 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 1000 mm dia
7682 Ductile Iron K - 12 specials suitable for push on jointing up to 600 mm dia
7683 Ductile Iron K - 12 specials suitable for push on jointing over 600 mm dia
7684 Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 - up to 600 mm dia

7685 Ductile Iron Specials suitable for mechanical jointing as per I.S. 9523 over 600 mm dia

7686 Ductile Iron Pipe Class K-9 flanges and welding 100 mm dia
7687 Ductile Iron Pipe Class K-9 flanges and welding 150 mm dia
7688 Ductile Iron Pipe Class K-9 flanges and welding 200 mm dia
7689 Ductile Iron Pipe Class K-9 flanges and welding 250 mm dia
7690 Ductile Iron Pipe Class K-9 flanges and welding 300 mm dia
7691 Ductile Iron Pipe Class K-9 flanges and welding 350 mm dia
7692 Ductile Iron Pipe Class K-9 flanges and welding 400 mm dia
7693 Ductile Iron Pipe Class K-9 flanges and welding 450 mm dia
7694 Ductile Iron Pipe Class K-9 flanges and welding 500 mm dia
7695 Ductile Iron Pipe Class K-9 flanges and welding 600 mm dia
7696 Ductile Iron Pipe Class K-9 flanges and welding 700 mm dia
7697 S&S Centrifugally (Spun) C.I. Pipe class LA 100 mm dia
7698 S&S Centrifugally (Spun) C.I. Pipe class LA 125 mm dia
7699 S&S Centrifugally (Spun) C.I. Pipe class LA 150 mm dia
7700 S&S Centrifugally (Spun) C.I. Pipe class LA 200 mm dia
7701 S&S Centrifugally (Spun) C.I. Pipe class LA 250 mm dia
7702 S&S Centrifugally (Spun) C.I. Pipe class LA 300 mm dia
7703 S&S Centrifugally (Spun) C.I. Pipe class LA 350 mm dia
7704 S&S Centrifugally (Spun) C.I. Pipe class LA 400 mm dia
7705 S&S Centrifugally (Spun) C.I. Pipe class LA 450 mm dia
7706 S&S Centrifugally (Spun) C.I. Pipe class LA 500 mm dia
7707 S&S Centrifugally (Spun) C.I. Pipe class LA 600 mm dia
7708 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing up to
300 mm dia
7709 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing over
300 mm dia

7710 S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint as per I.S. 13382
up to 300 mm dia
7711 S&S Centrifugally (Spun) C.I. Pipe Specials suitable for mechanical joint as per I.S. 13382
over 300 mm dia
7712 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 100 mm dia
7713 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 150 mm dia
7714 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 200 mm dia
7715 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 250 mm dia
7716 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 300 mm dia
7717 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 350 mm dia
7718 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 400 mm dia
7719 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 450 mm dia
7720 Screwed double flanged centrifugally cast (spun) C./. Pipe of Class B conforming to I.S.
1536, - 500 mm dia
7721 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 600 mm dia
7722 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100 mm dia
7723 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 150 mm dia
7724 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 200 mm dia
7725 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 250 mm dia
7726 Ductile Iron Class K- 7 pipe conforming to i.S. 8329 - 300 mm dia
7727 Ductile Iron Class K- 7 pipe conforming to i.S. 8329 - 350 mm dia
7728 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 400 mm dia
7729 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 450 mm dia
7730 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 500 mm dia
7731 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600 mm dia
7732 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 700 mm dia
7733 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 800 mm dia
7734 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 900 mm dia
7735 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000 mm dia
7736 Extruded burnt flyash clay sewer bricks conforming to I.S 4885
7737 Fly ash bricks conforming to I.S. 12894
7738 Calcium Silicate Bricks machine moulded conforming to I.S. 4139
7739 Modified Bitumen Refinery produced CRMB - 55
7741 Modified Bitumen Refinery produced CRMB - 60
7742 Bitumen emulsion medium setting (M.S.) conforming to IS : 8887
7743 M.S. pipe 150 mm dia casing pipe
7744 M.S. pipe 200 mm dia casing pipe
7745 PVC blind pipe 150 mm dia as per IS: 12818
7746 PVC blind pipe 200 mm dia as per IS: 12818
7747 M.S. cap 150 mm dia
7748 M.S. cap 200 mm dia
7749 M.S bail plug 150 mm dia
7750 M.S bail plug 200 mm dia
7751 PVC slotted pipe 150 mm dia as per IS: 12818
7752 PVC slotted pipe 200 mm dia as per IS: 12818
7753 Stone Boulder 50 mm to 200 mm
7754 Gravel 5 mm to 10 mm
7755 Gravel 1.5 mm to 2 mm
7756 Gravel 3 mm to 6 mm
7757 M.S. pipe 100 mm dia casing pipe
7758 uPVC blind pipe 100 mm dia as per IS: 12818
7759 uPVC slotted pipe 100 mm dia as per IS: 12818
7760 M.S. cap 100 mm dia
7761 M.S. bail plug 100 mm dia
7762 Precast R.C.C. perforated slab
7763 Water supply tanker of 5000 litre capacity
7764 M.S. socket 100 mm dia
7765 M.S. socket 150 mm dia
7766 M.S. socket 200 mm dia
7767 Stone cleaning chemical approved by ASI
7768 Water repallent chemical approved by ASI
7769 Stone surface strengthening chemical approved by ASI
7770 Turpentine oil
7771 Liquid Ammonia 5%
7772 Pea Gravel
7773 Coloured inter locking C.C. paver Block (60 mm thick, M-35)
7774 Stone size 10x10x7.50cm
7775 Sodium pentachlorophenate
7776 Concrete paver block of grade M-30 made of C&D waste (60mm thickness)

7800 Ceramic Glazed Tiles 1st quality minimum thickness 5mm in all colours shades and
designs except burgundy, bottle green, black
7801 Ceramic Glazed Tiles 1st quality 300 x 300 mm in all shades and designs of White, Ivory,
grey, Fume Red brown etc.
7802 Ceramic Glazed Tiles 1st quality 300 x 300 in all shades designs except White, Ivory,
Grey, Fume Red Brown etc.
7803 Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more in all shades designs
White, Ivory, Grey, Fume Red Brown etc.
7804 Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more in all shades designs
except White, Ivory, Grey, Fume Red Brown etc.
7805 Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan 724mm X 578 mm

7806 Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X 355 mm
7807 Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X 345 mm
7808 Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet

7809 Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet
7850 Agaria White marble slab plain 18 mm thick
7857 P.T.M.T. Grating square slit 150 mm
7858 P.T.M.T. Urinal cock 15 mm dia
7859 P.T.M.T. Bib cock with nozzle 15 mm
7861 P.T.M.T. Stop cock (concealed) 15 mm
7862 15 mm nominal bore and 30 cm length PVC connection pipe with
P.T.M.T. Nuts
7863 15 mm nominal bore and 45 cm length PVC connection pipe with
P.T.M.T. Nuts
7864 P.T.M.T. extension nipple 15 mm dia
7865 P.T.M.T. extension nipple 20 mm dia
7866 P.T.M.T. extension nipple 25 mm dia
7893 Tactile tile
7895 Matt finished vitrified tile 100x100 x16 mm
7896 Vitrified tile
7900 Modular common burnt clay bricks of class designation 7.5
7901 Machine moulded perforated common burnt clay FPS (non modular) bricks of class
designation 12.5
7902 Machine moulded common burnt clay modular perforated bricks of class designation
12.5
7903 Machine moulded common burnt clay FPS (non modular) bricks of class designation
12.5
7904 Machine moulded common burnt clay tile bricks of class designation 12.5
7911 Chemical Rust Remover
7912 Hire charges of Drill machine upto 30 mm dia
7913 Epoxy
7914 SBR Polymer
7915 Woven PVC cloth
7916 Hire charges of sand blasting equipment
7917 Hire charges of compressure
7918 25mm thick cement concrete shotcrete(guniting) with compressor
7919 50mm thick cement concrete shotcrete(guniting) with compressor
7920 75mm thick cement concrete shotcrete(guniting) with compressor
7921 Adhesive chemical
7922 Bit of drilling machine for Hole upto 30mm dia
7923 GI injection nipple 12mm dia, 75mm long
7924 Blowing compressed air for cleaning holes upto 30mm dia
7925 L shaped 100mm long, 10mm dia mild steel shear key
7926 Welding charges of shear key to existing reinforcement
7927 Acrylic Polymer chemical for cracks
7928 Hire charges of Plant and machinery, it can inject - 350kg/day
7929 Shear loops (6mm dia GI wire rope) (For vertical joints) 6 nos on each side

7930 dowel tubes (Corrugated GI pipes 50 to 80mm dia) (For horizontal joints)

7931 Hooks for lifting (Alloy steel) having 2.5 tonne capacity

7996 Factory made EPS light weight composite sandwitched wall/roof panel (50mm thick)
having core material of EPS granule balls/beads (conforming to IS 4671:1984 and
shall have density not less than 15kg per cum). The outer face on both sides of the
panels will be non asbestos fiber cement board confirming to IS 14862:2000 or Calcium
silicate board confirming to EN 14306:2009 of 5mm thick each.
7997 Factory made EPS light weight composite sandwitched wall/roof panel (60mm thick)
having core material of EPS granule balls/beads (conforming to IS 4671:1984 and
shall have density not less than 15kg per cum). The outer face on both sides of the
panels will be non asbestos fiber cement board confirming to IS 14862:2000 or Calcium
silicate board confirming to EN 14306:2009 of 5mm thick each

7998 Factory made EPS light weight composite sandwitched wall/roof panel (75mm thick)
having core material of EPS granule balls/beads (conforming to IS 4671:1984 and
shall have density not less than 15kg per cum). The outer face on both sides of the
panels will be non asbestos fiber cement board confirming to IS 14862:2000 or Calcium
silicate board confirming to EN 14306:2009 of 5mm thick each

7999 Factory made EPS light weight composite sandwitched wall/roof panel (90mm thick)
having core material of EPS granule balls/beads (conforming to IS 4671:1984 and
shall have density not less than 15kg per cum). The outer face on both sides of the
panels will be non asbestos fiber cement board confirming to IS 14862:2000 or Calcium
silicate board confirming to EN 14306:2009 of 5mm thick each

8000 Factory made EPS light weight composite sandwitched wall/roof panel (100mm thick)
having core material of EPS granule balls/beads (conforming to IS 4671:1984 and
shall have density not less than 15kg per cum). The outer face on both sides of the
panels will be non asbestos fiber cement board confirming to IS 14862:2000 or Calcium
silicate board confirming to EN 14306:2009 of 5mm thick each

8001 24 mm thick Factory made shutters with style, rails and panels of PVC extruded sections
in white, grey or wooden finish
8002 30 mm thick Factory made shutters with style, rails and panels of PVC extruded sections
in white, grey or wooden finish
8003 Factory made PVC rigid foam panelled shutter i/c carriage
8004 Factory made PVC rigid foam panelled shutter as per IS : 4020 i/c carriage

8006 Factory made PVC rigid foam sheet 1 mm thick

8007 Factory made PVC rigid foam sheet 5 mm thick
8008 Factory made prelaminated PVC rigid foam sheet 5 mm thick
8010 48mmX40mmX1.5mm thick Factory made door frame of PVC extruded sections in white,
grey or wooden finish
8011 Factory made door frame PVC extruded sheet i/c carriage
8012 Adhesive solvent cement
8013 Factory made EPS Core wallpanel /roof panel sandwiched between two Engineered
welded wire fabric mesh of 3 mm dia G.I. wire mesh,with 50 mm pitch in both the
directions, kept at 120-135 mm gap and interconnected by the zig zag G.I. wire of 3 mm
dia at alternate row by welding.

8014 Factory made door frame of size 50x47 mm with wall thickness 5 mm made of single
piece extruded profile

8015 Expanded poly ethylene Foam sheet 4mm thick of Density 40kg/m3
8016 High Density expanded poly ethylene (EPE) Foam 1mm thick
8017 Fire rated door frame made with 1.6 mm thick G.I sheet (120 minutes fire rating)

8018 Fire rated door shutter made with 1.6 mm thick G.I sheet (120 minutes fire rating)
including hinges ( without glass panels)
8019 GI sheet 0.8 mm thick confirming to IS 277:1992
8020 Factory made EPS Core wall panel /roof panel sandwiched between two Engineered
welded wire fabric mesh of 3 mm dia G.I. wire mesh, with 50 mm pitch in both the
directions, connected by G.I. wire of 3mm dia at alternate row by welding

8021 Bamboo wood Tile Flooring 14mm thick, minimum 1800 mm length and minimum
100 mm wide
8022 Bamboo wood Quarter Round 18mm thick of size 1900mm x 18mm
8023 Bamboo wood door reducer 14mm thick of size 1900mm x 44mm
8024 Bamboo wood Skirting 14mm thick of Size 1900mm x 85mm
8025 Bamboo wood Tile Wall Cladding 10mm thick, minimum 1800 mm length and
minimum 100 mm wide
8026 Bamboo wood T-mold 14mm thick of size 1900mm x 44mm
8027 Bamboo wood Threshold 14mm thick of size 1900mm x 44mm
8028 Bamboo wood shutter of doors
8029 Bamboo wood panelling (10mm thick)
8030 Superior class Bamboo wood door frame 65 mm thick,
8031 Aluminium sheets Grade 5052, 4 mm thick for wall panel/deck panel/ WRB panel/Kicker
Panels/door closing panels ( for form work)
8032 Aluminium sheets Grade 5052, 4 mm thick for Internal Corner/Column Corners/ ( for
form work)
8033 Aluminium sheets Grade 5052, 4 mm thick for Mid Soldier/End soldier (for form work)

Accessories for aluminium form work

8034 External corner 2050 mm
8035 External corner 825 mm
8036 soldier tie 370mm
8037 Adjustable prop-2.0 x2.0 m
8038 Pin-50
8039 Pin-127
8040 wedge
8041 wall tie-150 (355 mm )
8042 Polythene Sleeve 90 x 150mm
8043 Polythene Roll - 150mm Long.
8044 Vertical Soldier -1100mm
8045 Wall Attached Bracket 600x1000mm
8046 Allignment Pipe - 3.00 Mtr.
8047 Allignment Bracket
8048 Tie Rod for Bracket - 500mm
8049 Anchor Wing Nut Ø100 mm
8050 Debit Pin - 250mm
8051 PVC Pipe Ø20mm - 150mm long
8052 PVC Cone
8053 Bolt+Nut - 16 x 80 mm
8054 Flat Washer Ø16, 3mm thik
8055 Bolt+Nut - 16 x 30 mm
8056 Door spacer 45x45x5-1135mm Long
8057 Door spacer 45x45x5-1135mm Long
8100 Powder coated M.S. butt hinges 100 mm X58 mmX1.9 mm
8101 SS ball bearing of size 100 x89x3mm
8116 Zinc alloy (white powder coated) 3D Hinges for uPVC door
8117 Zinc alloy (white powder coated) handles with zinc plated mild steel multi point locking
having transmission gear, cylinder with keeps and one side key for uPVC casement
door

8118 Zinc alloy (white powder coated) handles along with zinc plated mild steel multi point
locking having transmission gear with keeps for uPVC sliding window

8119 Zinc alloy (white powder coated) handles with key along with zinc plated mild steel
multi point locking having transmission gear with keeps for uPVC sliding door

8121 uPVC extruded (small series) casement window frame size 47x50mm
8122 uPVC extruded (small series) casement window sash/window mullion size 47x68 mm

8125 uPVC extruded glazing bead of appropriate dimension for small series casement
window Sash
8126 uPVC extruded (big series) casement window frame size 67x60 mm
8127 uPVC extruded (big series) casement door frame size 67x64 mm
8128 uPVC extruded (big series) casement window sash/window mullion/ door mullion size
67x80 mm
8129 uPVC extruded (big series) casement door sash size 67x110 mm
8130 uPVC extruded glazing bead of appropriate dimension for big series casement
window/door sash
8131 uPVC extruded glazing bead of appropriate dimension for small series sliding window
sash
8132 uPVC extruded glazing bead of appropriate dimension for big series of sliding window/
door sash
8133 uPVC extruded (small series) 2 track sliding window frame size 52x44 mm

8134 uPVC extruded (big series) 2 track sliding window/door frame size 67x50mm

8135 uPVC extruded (small series) 3 track sliding window frame size 92x44 mm

8136 uPVC extruded (big series) 3 track sliding window/door frame size 116x45mm

8137 uPVC extruded (small series) 2 track sliding window sash/3 track sliding window sash
size 32x60mm
8138 uPVC extruded (big series) 2 track sliding window sash size 46x62mm
8139 uPVC extruded (big series) 3 track sliding window sash size 46x62mm

8140 uPVC extruded interlock of appropriate dimension for small series sliding window sash

8141 uPVC extruded interlock of appropriate dimension for big series sliding window/ door
sash
8142 uPVC extruded inline adaptor of appropriate dimension for big series sliding
window/door sash
8143 uPVC extruded 2 track sliding door sash/ 3 track sliding door sash (big series) size
46x82mm
8144 Bamboo Mat corrugated sheets 3.5 to 4mm thick conforming to IS 15476:2004

8145 Bamboo Mat Ridge cap 3.5 to 4mm thick conforming to IS 15476:2004
8146 3mm thick Bamboo Mat Board conforming to IS 13958:1994
8147 4mm thick Bamboo Mat Board conforming to IS 13958:1994
8148 6mm thick Bamboo Mat Board conforming to IS 13958:1994
8149 9mm thick Bamboo Mat Board conforming to IS 13958:1994
8150 12mm thick Bamboo Mat Board conforming to IS 13958:1994
8200 A.P.P. modified polymeric felt (two layers) 1.5 mm thick
8201 A.P.P. modified polymeric felt (two layers) 2 mm thick
8203 A.P.P. modified 2 mm thick membrane reinforced with glass fibre matt
8204 A.P.P. modified 3 mm thick membrane reinforced with glass fibre matt
8205 A.P.P. modified 3 mm thick membrane reinforced with polyester matt
8206 Bitumen primer for bitumen membrane
8207 Geotextile 120 grams per sqm membrane
8210 Stainless steel screws 50 mm
8211 Stainless steel screws 40 mm
8212 Stainless steel screws 30 mm
8214 Stainless steel screws 20 mm
8215 Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked
8216 Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked
8217 Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked
8218 Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked
8219 Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS : 12817 marked

8220 Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 12817 marked

8221 Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS : 12817 marked

8222 M.S. heavy weight butt hinges 125x90x4.0 mm IS: 1341 marked.
8223 M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked
8224 M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked
8225 M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 marked
8226 Concealed zinc coated hinges 19-20 mm thick with mounting plate
8227 Stainless steel fancy handle
8228 Soft closing stainless steel hinges
8229 Stainless steel telescopic drawer channels 500mm long
8230 Stainless steel (Grade-304) basket (readymade)
8300 1216 mm PE-AL-PE Composite pressure pipe

8301 1620 mm PE-AL-PE Composite pressure pipe

8302 2025 mm PE-AL-PE Composite pressure pipe
8303 2532 mm PE-AL-PE Composite pressure pipe
8304 3240 mm PE-AL-PE Composite pressure pipe
8305 4050 mm PE-AL-PE Composite pressure pipe
8306 PPR Union 20 mm
8307 PPR Union 25 mm
8308 PPR Union 32 mm
8309 PPR Union 40 mm
8310 PPR Union 50 mm
8311 PPR Union 63 mm
8312 PPR Union 75 mm
8500 Water for jetting / blowback
8501 Polymer modified cementation coating
8502 Fibre glass cloth
8504 Multi surface paint
8505 Acrylic exterior paint
8506 Premium Acrylic exterior paint
8507 Textured exterior paint
8508 Primer for cement paint
8509 Special Primer (C.W.)
8510 Metal Primer (U.G.)
8511 Fibre reinforced elastomeric liquid water proofing membrane
8512 Cementitious water proofing coating with elastic polymers
8513 Acrylic modified resin based texture
8514 40 mm long S.S screws with plastic rawl plugs
8515 Galavanised MS 8 mm outer diameter M-6 dash fastener 50mm long
8516 ZMB 60/equivalent
8517 ZMB thinner
8518 Zycoprime / equivalent
8519 Zycosil / equivalent
8520 Elastobar / equivalent
8552 Mineral fibre beveled tegular edged ceiling tiles 595 x595mm,16 mm thick
8553 Mineral fibre beveled tegular edged ceiling tiles 595 x595mm,16 mm thick with bio-block
conforming to ISO 5 (class 100) specifications.
8554 Mineral fiber beveled tegular edged ceiling tiles 595 x595mm,20 mm thick.

8555 G.I main runner 15 x32 mm of 3000 mm length, 0.33 mm thick

8556 G.I cross-T 15 x32 mm of 1200 mm length, 0.33 mm thick
8557 G.I cross-T 15 x32 mm of 600 mm length, 0.33 mm thick
8558 G.I hanger rod 6mm dia fully threaded upto 1000 mm length
8559 Stainless steel U Channel of size (50x25x2mm)
8560 Non staining water resistant clear silicon
8561 Extruded polystyrene rigid insulation board 50 mm thick
8562 Expanded Polystyrene insulation board 120 mm thick confirming to IS 4671-1984, Fire
retardant property self-extinguishing type as per

EN 13501-1
8563 15 mm thick, light weight, integral densified micro look edged, false ceiling tiles of size
595x595 mm.
8564 15 mm thick, light weight,fully perforated square/butt edge integral densified, false ceiling
tiles of size 595x595 mm.
8565 Galavanised MS hanger rod 6 mm dia MS fully threaded up to 1000mm length

8566 Powder coated steel section main-T ceiling sections 15x42x0.40 mm (3000 mm
long)
8567 Galvanized mild steel perimeter wall angle 22x19x0.40 mm (3000mm long)

8568 Powder coated Galvanised Iron intermediate cross-T section 15x42x

0.40 mm (1200 mm long)
8569 Powder coated Galvanized Iron intermediate cross-T section 15x42x 0.40mm (600 mm
long )
8570 GI Main T ceiling section 30x25x0.3 mm (3 metre long)
8571 GI Perimeter wall angle 25x25x0.4 mm (3 metre long)
8572 GI Intermediate cross T section 25x25x0.3 mm (1.2 metre long)
8573 GI Intermediate cross T section 25x25x0.3 mm (0.6 metre long)
8576 Powder coated Galvanized Iron intermediate cross-T section wire diameter 3.00 mm).

8577 Crates made of Mesh type 10x12 (D=100 mm) Zn+PVC coated. Mesh wire diameter
2.70/3.70 mm (ID/OD).
8578 Crates made of Mesh type 10x12 (D=100 mm) Zn+10% Al alloy +PVC coated. Mesh wire
diameter 2.70/3.70 mm (ID/OD).
8579 Cold form light gauge Steel C-section of thickness 0.75mm i/c zink coating/sliting etc.

8580 Wastage of cold form light gauge steel

8581 12 mm thick micro tegular edged semi perforated GRG (Glass Fibre Reinforced Gypsum)
false celing tiles of Size 595x595 mm
8582 12 mm thick micro tegular edged fully perforated GRG (Glass Fibre Reinforced Gypsum)
false celing tiles of Size 595x595 mm
8583 10 mm thick square edge fully perforated GRG(Glass Fibre Reinforced Gypsum) false
celing tiles of Size 595x595 mm
8587 Galvanized iron intermediate cross-T section 15x32x0.33 mm (600mm long)

8588 Galavanised MS hanger rod 6mm dia MS fully threaded up to 1000mm length

8589 Calcium Silicate tegular edged celling tiles 595x595 mm and 15 mm thick on edges

8590 Galvanised Steel main Tee ceiling section Size 24x38x0.33 mm (3 metre long)

8591 Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm (3.00 metre long)

8592 Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33mm (1.2 metre long)

8593 Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33mm (0.6 metre long)

8594 Galvanised Steel soffit cleat size 25x35x1.60 mm

8595 Wooden screws with plastic rawl plugs 35x8 mm
8596 Galvanised MS 8mm outer diameter M-6 dash fastener 25mm long
8597 GI Metal Tile Clip in Plain Beveled edge global white colour tiles of size 600x600 mm and
0.5 mm thick
8598 GI Metal Tile Clip in Perforated Beveled edge global white colour tiles of size 600x600
mm and 0.5 mm thick
8599 GI Metal Tile Lay-in Plain Tegular edge global white color tiles of Size 595x595 mm and
0.5 mm thick
8600 GI Metal Tile Lay-in Perforated Tegular edge global white color tiles of Size 595x595 mm
and 0.5 mm thick
8601 PVC Laminated Gypsum Tiles (Square edge) of Size 595x595 mm and
12.5 mm thick
8602 Gypsum Tiles Fully Perforated Square edge of Size 595x595 mm and
12.5 mm thick
8604 Spring T-section 24x34x0.45 mm (3.00 meter long)
8605 C Wall angle section 20x30x20x0.50 mm (3.00 meter long)
8606 Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long)
8607 Spring T-connector
8608 C Carrier Connector
8609 C Suspension Clip
8610 Wire Coupling Clip
8611 Main T ceiling sections 24x38x0.3 mm (3 metre long)
8612 Perimeter wall angle 24 x 24 x 0.3 mm (3 metre long)
8613 Intermediate cross T-Section 24x25x0.3 mm (1.2 m long)
8614 Intermediate cross T-Section 24x25x0.3 mm (0.6 m long)
8615 Hanger rod 4 mm thick
8616 Adjustment clip 85x30x0.8 mm
8617 Soffit cleat (Size 27x37x25x1.60 mm)
8618 Dash fastener 6 mm dia 50 mm long
8619 Galavanised MS L-shape level adjuster of size 85x25x2 mm
8620 Vitrified floor tile 50x50 cm conforming to IS 15622:2006 group (B1a)
8621 Vitrified floor tile 60x60 cm conforming to IS 15622:2006 group (B1a)
8622 Vitrified floor tile 80x80 cm conforming to IS 15622:2006 group (B1a)
8623 Vitrified floor tile 100x100 cm conforming to IS 15622:2006 group (B1a)
8624 "Border tiles 200x75mm size
8626 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 (SDR 7.4) - 20 mm Outer dia

8627 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 (SDR 7.4) - 25 mm Outer dia

8628 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 (SDR 7.4) - 32 mm Outer dia

8629 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 (SDR 7.4) - 40 mm Outer dia

8630 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 50 mm Outer dia

8631 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 63 mm Outer dia

8632 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 75 mm Outer dia

8633 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 90 mm Outer dia

8634 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 110 mm Outer dia

8635 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 160 mm Outer dia

8636 Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm nominal dia

8637 Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia
8638 Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia
8639 Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm nominal dia
8640 Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm nominal dia
8641 Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm nominal dia
8642 Chlorinated Polyvinyl - chloride (CPVC) pipe 65 mm nominal dia
8643 Chlorinated Polyvinyl - chloride (CPVC) pipe 80 mm nominal dia
8644 Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm nominal dia
8645 Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm nominal dia
8646 Weather Silicon sealant
8647 Stainless steel screws 30 mm x4 mm
8648 Hermetically sealed double glazed unit made with 6 mm thick clear float glass both side
having 12 mm air gap
8649 Stainless steel (SS 304 grade) adjustable friction window stay 205 x 19 mm

8650 Stainless steel (SS 304 grade) adjustable friction window stay 255 x 19 mm

8651 Stainless steel (SS 304 grade) adjustable friction window stay 355 x 19 mm

8652 Stainless steel (SS 304 grade) adjustable friction window stay 510 x 19 mm

8653 Stainless steel (SS 304 grade) adjustable friction window stay 710 x 19 mm

8654 Masking tape

8655 Autoclaved aerated cement (AAC) blocks
8656 Gypsum panel 666 X 500 X 100 mm size
8657 Bonding plaster for Gypsum panel
8658 Precast C&D waste concrete block
8659 Water proof ply 12 mm thick
8660 Aluminium casement window fastener (Anodised AC 15)
8661 Aluminium casement window fastener (powder coated )
8662 Aluminium casement window fastener (polyester powder coated)
8663 Aluminium round shape handle (anodised AC 15) outer dia 100 mm
8664 Aluminium round shape handle (powder coated) outer dia 100 mm
8665 Aluminium round shape handle (polyester powder coated) outer dia 100 mm

8666 Stainless steel screws 25 mm x4 mm

8667 UV stabilised 2 mm thick plain FRP sheet
8668 UV stabilised 2 mm thick corrugated FRP sheet
8669 Mangalore ridge tiles 20 mm thick
8670 Mangalore tiles 20 mm thick
8671 Precoated galvanised iron profile sheet 0.50 mm TCT
8672 Precoated galvanised steel plain ridges 0.50 mm TCT and 500-600mm wide

8673 Precoated galvanised steel flashings/aprons 0.50 mm TCT and upto 600mm wide

8674 Precoated galvanised steel gutter 600mm overall girth

8675 Precoated galvanised steel north light curves
8676 Precoated galvanised steel barge board (upto 300mm )
8677 Precoated galvanised steel crimp curve
8678 1 mm thick 35 mm wide bright finished stainless steel piano hinges
8682 Epoxy Grout
8683 Red sand stone gang saw cut 30 mm thick
8684 White sand stone gang saw cut 30 mm thick
8685 Delineator
8686 Precast C.C. Kerb stone M - 25
8687 Thermoplastic paint
8688 Glass beads
8689 Interlocking C.C. paver block ( 60 mm thick, M-30)
8690 High intensity retro - reflective sheet as per IRC 67-2001
8691 Punched tape concertina coil 600 mm dia 10 m openable length (Total length 90 m)

8692 RBT reinforced barbed wire

8693 Turn buckle and strengthening bolt
8694 Precast pavement slab 450 x 450 x 50 mm (M - 30)
8695 Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 4 mm

8696 Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 4 mm, PVC
coated to outer dia 5 mm
8697 Chain link fabric fencing mesh of size 25x25 mm made of G.I. wire of dia 3 mm

8698 Stainless steel cramps(weight 260 grams) with nuts, bolts and washer for dry stone
cladding
8699 8 mm thick tapered edge calcium silicate board
8700 10 mm thick calcium silicate board
8701 SS pipe 304 grades with press fit technology as per JIS 3448 standard 48.60 mm outer
dia
8702 Coupling/Socket fittings for 15.88 mm outer dia SS pipe
8703 Telescopic drawer channels 300 mm long
8704 Stainless steel roller for sliding arrangement in racks/ cupboards/ cabinets shutter

8705 50 mmX42 mmX2 mm thick Factory made door frame of PVC extruded sections in white,
grey or wooden finish
8706 25 mm thick factory made PVC flush door shutter i/c carriage
8707 Factory made glass reinforced plastic door frame 90x45 mm i/c carriage

8708 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage

8709 30 mm thick factory made solid PVC profile panelled door single piece extruded profile
decorative finish (wood grain printed on both side)
8710 Factory made solid PVC door frame 60 x 30 mm i/c carriage
8711 20 mm factory made solid PVC panel door shutter i/c carriage
8712 30 mm thick factory made solid PVC profile panelled door single piece extruded profile
non decorative finish
8713 Fiber glass reinforced plastic chajja
8714 Magnetic catcher triple strip vertical type
8715 Magnetic catcher double strip horizontal type
8716 100 mm mortice lock with 6 levers for aluminium door
8719 2nd class teak wood moulded beading or Taj beading/ornamental bleading of size
18X5 mm
8720 Ceiling sections 0.55 mm thick having a knurled web of 51.55 mm and two flanges of 26
mm each with lips of 10.55 mm
8721 Perimeter channel having one flange of 20 mm and another flange of 30 mm with
thickness of 0.55 mm and web of length 27 mm
8722 Nylon sleeves & wooden screws (40 mm)
8723 Counter sunk ribbed head screw 25 mm
8724 12 mm thick marine plywood conforming to IS: 710
8725 12 mm thick fire retardant plywood conforming to IS: 5509
8726 1.5 mm thick decorative laminated sheet
8727 1.0 mm thick decorative laminated sheet
8730 30 mm thick factory made glass fiber reinforced plastic flush door shutter i/c carriage

8731 High polymer modified quickset tile adhesive

8732 Synthetic ployster triangular fibre of length 12 mm, effective diameter 10-40 microns and
specific gravity of 1.34 to 1.40
8733 Synthetic ployster triangular fibre of length 6 mm, effective diameter 10-40 microns and
specific gravity of 1.34 to 1.40
8734 P.V.C. Single piece extruded door frame of profile size 50 mm x 47mm with wall thickness
of 5 mm
8735 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile
non decorative finished (Matt finished)
8736 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile
decorative finished (wood grain finished)
8737 Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50mm dia wire
8738 Factory made door frame fire rated (60 minutes) made with 16 SWG
G.I. Sheet of section 143 mm x 57 mm duly filled with vermuculite based concrete mix

8739 Fire rated door shuttere made with 16 SWG G.I. sheet (60 minutes) without panel

8740 Fire seal Putty

8741 Clear fire resistant glass panes 6mm thick (60 minutes)
8742 G.I. U beading of 16 SWG G.I. sheet (zinc coating >120gm/ m²) with ceramic tape of
suitable thickness and fire resistant primer coating

8743 Matrix Mineral Board

8744 Panic Bar / latch (Double point)
8745 65 mm x 55 mm x 2 mm thick Factory made door frame of PVC extruded section in white,
grey or wooden finish
8746 37 mm thick Factory made shutter with style,rails and panels of PVC extruded section in
white or grey finish i/c carriage
8747 75 mm x 53 mm x 2.0 mm thick Factory made door frame of PVC extruded section in
white, grey or wooden finish
8748 37 mm thick Factory made fusion welded shutter with style, rails and panels of PVC
extruded section in wooden finish
8749 Zinc alloy (white powder coated) touch lock with hook for wire mesh shutter

8750 Zinc alloy (white powder coated) casement handle for uPVC window/door

8751 Zinc alloy (white powder coated) touch lock withhook for uPVC window/door

8752 Zinc alloy body with single nylon roller (weight bearing capacity to be 40 Kg) for uPVC
sliding window
8753 Stainless Steel (SS - 304) with adjustable double nylon roller (weight bearing capacity to
be 120 Kg) for uPVC sliding door/ window

8754 Zinc alloy (white powder coated) cresent lock for uPVC sliding door/window

8755 Stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for uPVC windows

8756 Stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for uPVC windows

8757 Stainless steel friction hinges (SS-304 grade) size 300 x 19 x

1.9 mm for uPVC window
8758 Stainless steel friction hinges (SS-304 grade) size 350 x 19 x
1.9 mm for uPVC window
8759 Stainless steel friction hinges (SS-304 grade) size 400 x 19 x
1.9 mm for uPVC window
8760 Glass panes of required thickness having 60 minutes of fire resistance both integrity and
radiation control (EI 60) and minimum 20 minutes of insulation (EI 20)

8761 Scaffolding net made of high density polyethylene UV stabilized having density 100
gm/sqm
8772 Aluminium Track on bottom rail for uPVC window
8773 Wool pile/ weather pile strip for uPVC sliding window
8774 Aluminium Grill as per IS 1868
8775 Steel Galvanised tubular reinforcement for uPVC door/ window
8776 Stainless steel dash fastener of 8 mm dia and 75 mm long bolt
8777 GI Fastener 100x8 mm
8778 Toughened glass 12 mm thickness
8779 SS pipe 304 grades with press fit technology as per JIS 3448 standard 15.88 mm outer
dia
metre 1010.00

sqm 2800.00

sqm 3250.00

sqm 1750.00

sqm 2360.00

sqm 600.00

sqm 1020.00

sqm 2260.00

sqm 125.00
sqm 2152.80

sqm 1991.30

sqm 2475.00

sqm 2260.00
litre 190.00
litre 120.00
metre 60.00
Nos 22.00
kg 120.00
Nos 25.00
kg 180.00
litre 90.00
kg 20.00
each 15.00
each 35.00

each 12.00

sqm 830.00
day 250.00

kg 250.00

kg 35.00
tonne 5000.00
kg 46.00

sqm 1450.00
sqm 685.00
 sqm 620.00
sqm 1000.00
cum 1300.00

each 195.00

each 215.00

each 280.00
each 700.00
each 1200.00
1000 Nos 4500.00

sqm 140.00

metre 46.00
metre 22.00
metre 38.00
metre 12.00

each 4.00

each 3.00
kg 24.00
kg 21.00
roll 90.00
each 12.50
100 Nos 58.00
litre 70.00
litre 150.00
each 8.00
tonne 7800.00

1000 Nos 480.00

each roll 150.00

10 Nos 105.00
sqm 380.00

sqm 250.00

sqm 250.00

sqm 420.00

metre 76.00
metre 72.00
each 7.00
each 8.00
100 Nos 48.00

metre 42.00
metre 54.00
sqm 1300.00
sqm 1375.00
metre 450.00
metre 560.00
each 22.00
 metre 12.00
sqm 50.00
sqm 350.00
sqm 26.00
sqm 12.00

sqm 430.00

metre 100.00
each 40.00
each 560.00

each 35.00

each 30.00

each 25.00

sqm 500.00

sqm 370.00

sqm 550.00
each 5500.00

each 1600.00

each 9000.00
each 2200.00

each 4500.00

10 Nos 500.00
each 570.00
sqm 120.00
sqm 140.00

each 3000.00

each 3500.00

each 3200.00

each 3000.00

each 2200.00

each 1500.00

each 1200.00

each 1600.00
each 850.00
each 1000.00
each 350.00
each 400.00
each 290.00
each 290.00

each 670.00
sqm 115.00

each 25.00

each 33.00

each 35.00

each 35.00

each 620.00
each 4500.00

each 550.00

each 700.00

each 1150.00

each 185.00
each 240.00

each 675.00

each 575.00

each 575.00

each 670.00

each 575.00

each 880.00

each 1170.00

sqm 1620.00

sqm 1720.00

sqm 1910.00
 sqm 1620.00

sqm 1620.00

sqm 1430.00

10 cudm 700.00

kg 95.00
kg 48.00
kg 43.00
tonne 2800.00
each 57.00
each 27.00

metre 70.00

metre 130.00

each 8.00

each 11.00

each 18.00
each 39.00
each 18.00
each 32.00
each 46.00
each 81.00
each 59.00
each 92.00

each 35.00
each 59.00
each 27.00
each 47.00
each 15.00
each 14.00
each 3.00
each 70.00
litre 1200.00
each 7.00
each 4.00
each 3.00
each 70.00
kg 20.00
litre 200.00
kg 260.00
 kg 225.00
sqm 90.00
sqm 130.00
sqm 75.00

sqm 225.00

sqm 335.00

kg 215.00
litre 215.00
litre 240.00
litre 300.00

sqm 1500.00

sqm 1800.00

per test 38500.00

per test 43000.00

per test 49500.00

per test 13800.00

per test 22800.00

per test 28500.00

per test 13800.00

per test 23100.00

litre 36.00
litre 115.00
litre 130.00
each 300.00
each 500.00
 each 500.00
each 420.00
each 350.00
1000 Nos 8000.00

each 105.00

each 100.00
sqm 435.00
sqm 860.00
metre 28.00
sqm 900.00
sqm 110.00
sqm 200.00
tonne 38100.00
kg 155.00

sqm 1800.00

sqm 1900.00

sqm 1000.00

sqm 2000.00

sqm 1200.00

sqm 2100.00

kg 190.00

sqm 305.00

tonne 38150.00
each 10.00
each 10.00
each 13.00
each 14.00
kg 29.00
each 860.00
each 38.00
each 48.00
each 57.00
each 67.00
each 15.00
each 15.00
each 240.00
each 910.00
each 76.00
each 59.00
metre 215.00
each 860.00
each 255.00
each 965.00
each 635.00
 kg 46.00
kg 76.00
kg 315.00
kg 290.00
kg 182.00
each 1480.00
each 955.00
each set 355.00
each 910.00
each 46.00
100 Nos 27.00
100 Nos 10.00
metre 14.00
each 110.00

each 575.00

each 450.00
each 500.00
each 430.00
each 500.00

sqm 240.00

metre 60.00

sqm 845.00
metre 70.00

each 445.00

each 765.00

each 1050.00

each 1430.00

each 865.00

each 620.00
each 235.00
tonne 18250.00
each 7.00
sqm 490.00
sqm 95.00
kg 40.00
each 10.00
kg 38.00
metre 15.00
kg 48.00
kg 61.00
kg 67.00
each 1500.00
each 20.00
each 1620.00
each 145.00
each 765.00
each 48.00
each 65.00
each 90.00
each 100.00
each 60.00
each 68.00
each 115.00
each 55.00
each 45.00
each 16.00
each 125.00
each 25.00

each 118.00

each 3715.00
each 4525.00

each 5910.00
each 2030.00
each 3143.00
each 4765.00
each 5145.00
each 2680.00
each 4370.00
each 5540.00
each 7860.00
each 80.00
metre 200.00
metre 160.00
metre 160.00
each 8.00
each 10.00
each 24.00
sqm 450.00
each 62.00
each 14.00
each 11.00
sqm 800.00
kg 210.00
sqm 345.00

sqm 538.00

sqm 650.00

metre 20.00

sqm 480.00

sqm 500.00
sqm 560.00

sqm 850.00

sqm 490.00
metre 40.00
metre 52.00
each 34.00
each 39.00
each 200.00

each 200.00

each 75.00

each 110.00

each 275.00

each 420.00

each 820.00

each 85.00
each 65.00
each 95.00
each 110.00
each 125.00
each 145.00
each 150.00
each 55.00
each 58.00
each 20.00
each 20.00
each 29.00
each 36.00
each 35.00
each 58.00
each 22.00
sqm 260.00
sqm 350.00
sqm 625.00
sqm 930.00

metre 700.00

metre 570.00

each 230.00
 each 160.00

each 510.00

each 275.00

each 400.00

each 215.00

each 400.00

each 375.00

each 625.00

each 390.00

each 260.00

each 430.00

each 360.00

each 295.00

each 440.00

each 310.00

each 365.00

each 290.00

each 270.00

each 540.00

each 385.00

each 275.00

each 250.00

metre 765.00
metre 1150.00
metre 1575.00
metre 2200.00
metre 2750.00
metre 3350.00
metre 4300.00
metre 5000.00
metre 6270.00
metre 7560.00
metre 10500.00
metre 11350.00
metre 11450.00
metre 13900.00
metre 15550.00

each 29.00
each 33.00
each 60.00
each 70.00
each 100.00
each 116.00
each 210.00
each 250.00
each 270.00
each 356.00
each 510.00
each 600.00
each 705.00
each 910.00
each 1080.00
quintal 12400.00
quintal 17200.00

quintal 13050.00

quintal 18750.00

metre 1100.00
metre 1650.00
metre 2075.00
metre 2950.00
metre 3790.00
metre 4780.00
metre 6150.00
metre 6453.00
metre 9180.00
metre 12150.00
metre 14370.00
metre 857.00
metre 1067.00
metre 1286.00
metre 2190.00
metre 2857.00
metre 3857.00
metre 4619.00
metre 6095.00
metre 7381.00
metre 8571.00
metre 11995.00
quintal 5190.00

quintal 6200.00

quintal 8571.00

quintal 9048.00

metre 1310.00

metre 2048.00

metre 3238.00

metre 3905.00

metre 4990.00

metre 6286.00

metre 8143.00

metre 10381.00

metre 12914.00

metre 17905.00

metre 800.00
metre 1140.00
metre 1400.00
metre 1800.00
metre 2250.00
metre 2650.00
metre 3175.00
metre 3852.00
metre 4350.00
metre 5600.00
metre 7300.00
metre 9100.00
metre 11800.00
metre 12300.00
1000 Nos 5000.00
1000 Nos 3950.00
1000 Nos 5050.00
tonne 28000.00
tonne 29150.00
tonne 27100.00
metre 1126.00
metre 1400.00
metre 490.00
metre 700.00
each 150.00
each 200.00
each 200.00
each 220.00
metre 500.00
metre 810.00
cum 810.00
cum 815.00
cum 815.00
cum 815.00
metre 780.00
metre 405.00
metre 425.00
each 135.00
each 160.00
each 875.00
each 1500.00
each 125.00
each 205.00
each 265.00
litre 270.00
litre 1100.00
litre 835.00
litre 50.00
litre 145.00
cum 910.00
sqm 425.00
each 9.00
kg 500.00

sqm 295.00

sqm 190.00

sqm 175.00

sqm 300.00

sqm 340.00

sqm 400.00

each 4500.00

each 1500.00
each 2000.00
each 450.00

each 500.00
sqm 950.00
each 45.00
each 95.00
each 110.00
 each 120.00

each 38.00

each 52.00

each 25.00
each 50.00
each 68.00
sqm 800.00
sqm 910.00
sqm 450.00
1000 Nos 3800.00

1000 Nos 4200.00

1000 Nos 4800.00

1000 Nos 4700.00

1000 Nos 4600.00

litre 245.00
day 160.00
kg 585.00
kg 175.00
sqm 25.00
day 450.00
day 650.00
sqm 110.00
sqm 175.00
sqm 280.00
ml 2.00
each 500.00
each 45.00
each 10.00
kg 80.00
each 2.00
kg 31.00
day 100.00

each 210.00

metre 144.00

each 270.00

sqm 735.25
 sqm 845.00

sqm 1074.46

sqm 1268.00

sqm 1512.37

sqm 1085.93

sqm 1248.82

sqm 1547.45

sqm 1547.45

sqm 155.80
sqm 632.00
sqm 752.00

metre 130.00

metre 260.00
kg 140.00

sqm 1650.00

metre 298.74

sqm 20.00
sqm 10.00

metre 1200.00

sqm 6000.00
 kg 90.00

sqm 600.00

sqm 3470.00

metre 115.00
metre 255.00
metre 300.00

sqm 3400.00

metre 250.00
metre 255.00
10 cudm 1700.00
10 cudm 1680.00
10 cudm 1675.00

sqm 8500.00

sqm 11500.00

sqm 32000.00

each 1400.00
each 590.00
each 290.00
each 1200.00
each 15.00
each 55.00
each 14.00
each 45.00
each 3.00
each 6.00
each 370.00
each 990.00
each 1000.00
each 480.00
each 120.00
each 65.00
each 60.00
each 5.00
each 5.00
each 30.00
each 5.00
each 18.00
each 365.00
each 320.00
10 Nos 130.00
each 450.00
each 455.00
each set 2635.00

each set 1535.00

each set 1265.00

metre 280.00

metre 311.00

metre 100.00

metre 351.00
metre 396.00

metre 469.00

metre 568.00

metre 135.00

metre 66.00

metre 85.00

metre 314.00

metre 424.00

metre 418.00

metre 583.00

metre 291.00

metre 357.00
metre 358.00

metre 88.00

metre 98.00

metre 98.00

metre 385.00

sqm 2648.00

metre 2570.00
sqm 1508.00
sqm 1738.00
sqm 2098.00
 sqm 2688.00
sqm 3115.00
sqm 80.00
sqm 120.00
sqm 130.00
sqm 190.00
sqm 210.00
litre 85.00
sqm 45.00
100 Nos 300.00
100 Nos 250.00
100 Nos 230.00
100 Nos 150.00
10 Nos 310.00
10 Nos 280.00
10 Nos 180.00
10 Nos 150.00

10 Nos 375.00

10 Nos 275.00

10 Nos 230.00

10 Nos 230.00
10 Nos 180.00
10 Nos 110.00
10 Nos 90.00
10 Nos 460.00
10 Nos 1000.00
10 Sets 1550.00
set 535.00
kg 260.00
metre 80.00

metre 90.00
metre 140.00
metre 180.00
metre 280.00
metre 360.00
each 60.00
each 110.00
each 150.00
each 220.00
each 410.00
each 550.00
each 1100.00
1000 litre 1500.00
kg 160.00
sqm 32.00
litre 300.00
litre 200.00
litre 210.00
litre 280.00
 litre 90.00
litre 160.00
litre 105.00
litre 230.00
kg 225.00
kg 42.00
100 42.00
each 42.00
kg 110.00
litre 220.00
litre 230.00
litre 1800.00
kg 300.00
sqm 835.00

sqm 925.00

sqm 1045.00

each 190.00
each 78.00
each 35.00
each 26.00
metre 160.00
metre 70.00
sqm 550.00

sqm 825.00

sqm 725.00

sqm 900.00

each 27.00

each 260.00

each 125.00

each 105.00

each 50.00

each 210.00
each 170.00
each 80.00
each 35.00

sqm 200.00

sqm 250.00

sqm 290.00
 kg 140.00

kg 18.00

sqm 550.00

sqm 600.00

sqm 750.00

each 37.00

each 28.00

sqm 685.00

each 140.00

each 90.00

each 45.00

each 22.00

each 4.50
each 1.00
each 35.00

sqm 710.00

sqm 800.00

sqm 625.00

sqm 735.00

sqm 880.00

sqm 380.00

metre 220.00
metre 110.00
metre 130.00
each 5.00
each 12.00
each 10.00
each 10.00
each 130.00
each 80.00
each 40.00
each 20.00
each 10.00
each 6.00
each 5.00
 each 10.00
each 15.00
sqm 500.00
sqm 560.00
sqm 900.00
sqm 1390.00
each 16.00

metre 48.46

metre 74.82

metre 107.47

metre 162.00

metre 255.00

metre 285.00

metre 425.00

metre 600.00

metre 890.00

metre 2575.00

metre 49.00
metre 80.00
metre 127.97
metre 165.00
metre 230.00
metre 375.25
metre 793.30
metre 1031.05
metre 1466.75
metre 3145.15
cartridge 112.00
100 Nos 35.84

sqm 2200.00

each 197.80

each 225.00

each 195.00

each 535.00

each 925.00

metre 2.18
 cum 2650.00
sqm 480.00
kg 25.50
1000 Nos 25150.00
sqm 525.00
each 48.00
each 52.64
each 51.52
each 59.36
each 60.00

each 62.00

100 Nos 41.80

sqm 450.00
sqm 525.00
each 8.00
each 8.00
sqm 375.00

metre 225.00

metre 235.20

metre 440.00
metre 240.00
metre 230.00
sqm 235.00
metre 47.04
kg 380.00
sqm 476.00
sqm 560.00
each 336.00
cum 5600.00
kg 66.00
kg 72.00
sqm 440.00
sqm 1443.00

bundle 600.00

metre 7.00
each set 42.00
each 145.00

sqm 300.00

sqm 330.00

sqm 380.00

each 115.00

sqm 270.00
sqm 420.00
 metre 620.00

each 60.00
set 240.00

each 11.00

metre 166.00

sqm 1700.00

metre 480.00

sqm 2326.00

sqm 2100.00

metre 315.00
sqm 2050.00

sqm 2000.00

sqm 3000.00
each 28.00
each 20.00
each 432.00

metre 30.00

metre 38.00

metre 23.00

each 2.60
100 Nos 76.00
sqm 720.00
sqm 867.00
sqm 380.00
sqm 294.00

sqm 2675.00

kg 9.00

kg 370.00

kg 410.00

metre 265.00

sqm 2295.00

sqm 2707.00

sqm 413.00
metre 1062.00

sqm 4702.00

kg 304.00
sqm 21500.00

metre 303.00

metre 70.00
each 5200.00

metre 364.00

sqm 2479.00

metre 413.00

sqm 2703.00

each 133.00

each 130.00

each 114.00

each 60.00

each 105.00

each 110.00

each 212.00

each 237.00

each 260.00

each 361.00

each 365.00

sqm 22500.00

sqm 22.00

metre 37.00
metre 20.00
kg 279.00
metre 62.00
each 17.00
each 15.00
sqm 1750.00

metre 140.00
8780 SS pipe 304 grades with press fit technology as per JIS 3448
standard 22.22 mm outer dia
8781 SS pipe 304 grades with press fit technology as per JIS 3448 standard 28.58 mm outer
dia
8782 SS pipe 304 grades with press fit technology as per JIS 3448 standard 34.00 mm outer
dia
SS pipe 304 grades with press fit technology as per JIS 3448 standard 42.70 mm outer
0004 Production cost of concrete by batch mix plant

dia
8784 8 mm thick Calcium silicate perforated tiles of size 595 x595 mm
8785 Interlocking C.C. paver block ( 80 mm thick, M-30)
8786 Coupling/Socket fittings for 22.22 mm outer dia SS pipe
8787 Coupling/Socket fittings for 28.58 mm outer dia SS pipe
8788 Coupling/Socket fittings for 34.00 mm outer dia SS pipe
8789 Coupling/Socket fittings for 42.70 mm outer dia SS pipe
8790 Coupling/Socket fittings for 48.60 mm outer dia SS pipe
8791 Reducer for 22.22 mm X 15.88 mm outer Dia SS pipe
8792 Reducer for 28.58 mm X 15.88 mm outer Dia SS pipe
8793 Reducer for 28.58 mm X 22.22 mm outer Dia SS pipe
8794 Reducer for 34.00 mm X 15.88 mm outer Dia SS pipe
8795 Reducer for 34.00 mm X 22.22 mm outer Dia SS pipe
8796 Reducer for 34.00 mm X 28.58 mm outer Dia SS pipe
8797 Reducer for 42.70 mm X 15.88 mm outer Dia SS pipe
8798 Reducer for 42.70 mm X 22.22 mm outer Dia SS pipe
8799 Reducer for 42.70 mm X 28.58 mm outer Dia SS pipe
8800 Reducer for 42.70 mm X 34.00 mm outer Dia SS pipe
8801 Reducer for 48.60 mm X 15.88 mm outer Dia SS pipe
8802 Reducer for 48.60 mm X 22.22 mm outer Dia SS pipe
8803 Reducer for 48.60 mm X 28.58 mm outer Dia SS pipe
8804 Reducer for 48.60 mm X 34.00 mm outer Dia SS pipe
8805 Reducer for48.60 mm X 42.70 mm outer Dia SS pipe
8806 Slip Coupling / Socket 15.88 mm outer dia SS pipe
8807 Slip Coupling / Socket 22.22 mm outer dia SS pipe
8808 Slip Coupling / Socket 28.58 mm outer dia SS pipe
8809 Slip Coupling / Socket 34.00 mm outer dia SS pipe
8810 Slip Coupling / Socket 42.70 mm outer dia SS pipe
8811 Slip Coupling / Socket 48.60 mm outer dia SS pipe
8812 Elbow 90° for 15.88 mm outer dia SS pipe
8813 Elbow 90° for 22.22 mm outer dia SS pipe
8814 Elbow 90° for 28.58 mm outer dia SS pipe
8815 Elbow 90° for 34.00 mm outer dia SS pipe
8816 Elbow 90° for 42.70 mm outer dia SS pipe
8817 Elbow 90° for 48.60 mm outer dia SS pipe
8818 Reducing Elbow 90° for 22.22 mm X 15.88 mm outer dia SS pipe
8819 Reducing Elbow 90° for 28.58 mm X 15.88 mm outer dia SS pipe
8820 Reducing Elbow 90° for 28.58 mm X 22.22 mm outer dia SS pipe
8821 Reducing Elbow 90° for 34.00 mm X 22.22 mm outer dia SS pipe
metre 250.00

metre 310.00

metre 439.50

metre 450.00

sqm 850.00
sqm 485.00
each 70.00
each 96.25
each 135.00
each 160.00
each 180.00
each 108.50
each 152.50
each 161.50
each 200.00
each 210.00
each 210.00
each 375.00
each 375.00
each 390.00
each 390.00
each 425.00
each 425.00
each 425.00
each 425.00
each 425.00
each 55.00
each 70.00
each 95.00
each 135.00
each 160.00
each 175.00
each 65.00
each 70.00
each 105.00
each 120.00
each 130.00
each 160.00
each 150.00
each 210.00
each 250.00
each 295.00
8822 Reducing Elbow 90° for 34.00 mm X 28.58 mm outer dia SS pipe
8823 Reducing Elbow 90° for 42.70 mm X 34.00 mm outer dia SS pipe
8824 Equal Tee for 15.88 mm outer dia SS pipe
8825 Equal Tee for 22.22 mm outer dia SS pipe
Equal Tee for 28.58 mm outer dia SS pipe
0004 Production cost of concrete by batch mix plant

8827 Equal Tee for 34.00 mm outer dia SS pipe

8828 Equal Tee for 42.70 mm outer dia SS pipe
8829 Equal Tee for 48.60 mm outer dia SS pipe
8830 Reducing Tee for 22.22 mm X 15.88 mm outer dia SS
8831 Reducing Tee for 28.58 mm X 15.88 mm outer dia SS pipe
8832 Reducing Tee for 28.58 mm X 22.22 mm outer dia SS pipe
8833 Reducing Tee for 34.00 mm X 15.88 mm outer dia SS pipe
8834 Reducing Tee for 34.00 mm X 22.22 mm outer dia SS pipe
8835 Reducing Tee for 34.00 mm X 28.58 mm outer dia SS pipe
8836 Reducing Tee for 42.70 mm X 15.88 mm outer dia SS pipe
8837 Reducing Tee for 42.70 mm X 22.22 mm outer dia SS pipe
8838 Reducing Tee for 42.70 mm X 28.58 mm outer dia SS pipe
8839 Reducing Tee for 42.70 mm X 34.00 mm outer dia SS pipe
8840 Reducing Tee for 48.60 mm X 15.88 mm outer dia SS pipe
8841 Reducing Tee for 48.60 mm X 22.22 mm outer dia SS pipe
8842 Reducing Tee for 48.60 mm X 28.58 mm outer dia SS pipe
8843 Reducing Tee for 48.60mm X 34.00 mm outer dia SS pipe
8844 Reducing Tee for 48.60mm X 42.70mm outer dia SS pipe
8845 Stainless steel Male thread Tee for 15.88 mm outer dia X 15 mm nominal dia threaded

8846 Stainless steel Male thread Tee for 22.22 mm outer dia X 15 mm nomina dia threaded

8847 Stainless steel Male thread Tee for 22.22 mm outer dia X 20 mm nominal dia threaded

8848 Stainless steel Male thread Tee for 28.58 mm outer dia X 15 mm nomina dia threaded

8849 Stainless steel Male thread Tee for 28.58 mm outer dia X 20 mm nominal dia threaded

8850 Stainless steel Male thread Tee for 28.58 mm outer dia X 25 mm nominal dia threaded

8851 Stainless steel Male thread Tee for 34.00 mm outer dia X 15 mm nominal dia threaded

8852 Stainless steel Male thread Tee for 34.00 mm outer dia X 20 mm nominal dia threaded

8853 Stainless steel Male thread Tee for 34.00 mm outer dia X 25 mm nominal dia threaded

8854 Stainless steel Male thread Tee for 34.00 mm outer dia X 32 mm nominal dia threaded

8855 Stainless steel Male thread Tee for 42.70 mm outer dia X 15 mm nominal dia threaded

8856 Stainless steel Male thread Tee for 42.70 mm outer dia X 20 mm nominal dia threaded

8857 Stainless steel Male thread Tee for 42.70 mm outer dia X 25 mm nominal dia threaded

8858 Stainless steel Male thread Tee for 42.70 mm outer dia X 32 mm nominal dia threaded
8859 Stainless steel Male thread Tee for 42.70 mm outer dia X 40 mm nominal dia threaded

8860 Stainless steel Male thread Tee for 48.60 mm outer dia X 15 mm nominal dia threaded

8861 Stainless steel Male thread Tee for 48.60 mm outer dia X 20 mm nominal dia threaded

8862 Stainless steel Male thread Tee for 48.60 mm outer dia X 25 mm nominal dia threaded

8863 Stainless steel Male thread Tee for 48.60 mm outer dia X 32 mm nominal dia threaded

8864 Stainless steel Male thread Tee for 48.60 mm outer dia X 40 mm nominal dia threaded

8865 Stainless steel Male thread Tee for 48.60 mm outer dia X 50 mm nominal dia threaded

8866 Stainless steel Female thread Tee for 15.88 mm outer dia X 15 mm nominal dia
threaded
8867 Stainless steel Female thread Tee for 22.22 mm outer dia X 15 mm nominal dia
threaded
8868 Stainless steel Female thread Tee for 22.22 mm outer dia X 20 mm nominal dia
threaded
8869 Stainless steel Female thread Tee for 28.58 mm outer dia X 15 mm nominal dia
threaded
8870 Stainless steel Female thread Tee for 28.58 mm outer dia X 20 mm nominal dia
threaded
8871 Stainless steel Female thread Tee for 28.58 mm outer dia X 25 mm nominal dia
threaded
8872 Stainless steel Female thread Tee for 34.00 mm outer dia X 15 mm nominal dia
threaded
8873 Stainless steel Female thread Tee for 34.00 mm outer dia X 20 mm nominal dia
threaded
8874 Stainless steel Female thread Tee for 34.00 mm outer dia X 25 mm nominal dia
threaded
8875 Stainless steel Female thread Tee for 34.00 mm outer dia X 32 mm nominal dia
threaded
8876 Stainless steel Female thread Tee for 42.70 mm outer dia X 15 mm nominal dia
threaded
8877 Stainless steel Female thread Tee for 42.70 mm outer dia X 20 mm nominal dia
threaded
8878 Stainless steel Female thread Tee for 42.70 mm outer dia X 25 mm nominal dia
threaded
8879 Stainless steel Female thread Tee for 42.70 mm outer dia X 32 mm nominal dia
threaded
8880 Stainless steel Female thread Tee for 42.70 mm outer dia X 40 mm nominal dia
threaded
8881 Stainless steel Female thread Tee for 48.60 mm outer dia X 15 mm nominal dia
threaded
8882 Stainless steel Female thread Tee for 48.60 mm outer dia X 20 mm

nominal dia threaded

8883 Stainless steel Female thread Tee for 48.60 mm outer dia X 25 mm
nominal dia threaded
8884 Stainless steel Female thread Tee for 48.60 mm outer dia X 32 mm
 nominal dia threaded
8885 Stainless steel Female thread Tee for 48.60 mm outer dia X 40 mm
nominal dia threaded
8886 Stainless steel Female thread Tee for 48.60 mm outer dia X 50 mm
nominal dia threaded
8887 Stainless steel Female threaded Connector/Adapter for 15.88 mm
outer dia X 15 mm nominal threaded
8888 Stainless steel Female threaded Connector/Adapter for 22.22 mm
outer dia X 15 mm nominal threaded
8889 Stainless steel Female threaded Connector/Adapter for 22.22 mm
outer dia X 20 mm nominal threaded
8890 Stainless steel Female threaded Connector/Adapter for 28.58 mm
outer dia X 15 mm nominal threaded
8891 Stainless steel Female threaded Connector/Adapter for 28.58 mm
outer dia X 20 mm nominal threaded
8892 Stainless steel Female threaded Connector/Adapter for 28.58 mm
outer dia X 25 mm nominal threaded
8893 Stainless steel Female threaded Connector/Adapter for 34.00 mm outer dia X 25 mm
nominal threaded
8894 Stainless steel Female threaded Connector/Adapter for 34.00 mm
outer dia X 32 mm nominal threaded
8895 Stainless steel Female threaded Connector/Adapter for 42.70 mm
outer dia X 32 mm nominal threaded
8896 Stainless steel Female threaded Connector/Adapter for 42.70 mm
outer dia X 40 mm nominal threaded
8897 Stainless steel Female threaded Connector/Adapter for 48.60 mm
outer dia X 40 mm nominal threaded
8898 Stainless steel Female threaded Connector/Adapter for 48.60 mm
outer dia X 50 mm nominal threaded
8899 Stainless steel Male threaded Connector/Adapter for 15.88 mm
outer dia X 15 mm nominal threaded
8900 Stainless steel Male threaded Connector/Adapter for 22.22 mm
outer dia X 15 mm nominal threaded
8901 Stainless steel Male threaded Connector/Adapter for 22.22 mm
outer dia X 20 mm nominal threaded
8902 Stainless steel Male threaded Connector/Adapter for 28.58 mm
outer dia X 20 mm nominal threaded
8903 Stainless steel Male threaded Connector/Adapter for 28.58 mm
outer dia X 25 mm nominal threaded
8904 Stainless steel Male threaded Connector/Adapter for 34.00 mm
outer dia X 25 mm nominal threaded
8905 Stainless steel Male threaded Connector/Adapter for 34.00 mm
outer dia X 32 mm nominal threaded
8906 Stainless steel Male threaded Connector/Adapter for 42.70 mm
outer dia X 32 mm nominal threaded
8907 Stainless steel Male threaded Connector/Adapter for 42.70 mm

outer dia X 40 mm nominal threaded

8908 Stainless steel Male threaded Connector/Adapter for 48.60 mm
outer dia X 40 mm nominal threaded
8909 Stainless steel Male threaded Connector/Adapter for 48.60 mm
outer dia X 50 mm nominal threaded
8910 Stainless steel Valve Connector for 15.88 mm outer dia X 15 mm
nominal dia threaded
8911 Stainless steel Valve Connector for 22.22 mm outer dia X 15 mm
nominal dia threaded
8912 Stainless steel Valve Connector for 22.22 mm outer dia X 20 mm
nominal dia threaded
8913 Stainless steel Valve Connector for 28.58 mm outer dia X 25 mm
nominal dia threaded
8914 Stainless steel Valve Connector for 34.00 mm outer dia X 32 mm
nominal dia threaded
8915 Stainless steel Valve Connector for 42.70 mm outer dia X 40 mm
nominal dia threaded
8916 Stainless steel Valve Connector for 48.60 mm outer dia X 50 mm
nominal dia threaded
8917 SS Female Threaded Elbow 90o for 15.88 mm outer dia X 15 mm
nominal dia threaded
8918 Stainless steel Female Threaded Elbow 90o for 22.22 mm outer dia X 15 mm nominal
dia threaded
8919 Stainless steel Female Threaded Elbow 90o for 22.22 mm outer dia X
20 mm nominal dia threaded
8920 Stainless steel Female Threaded Elbow 90o for 28.58 mm outer dia X
25 mm nominal dia threaded
8921 Stainless steel Female Threaded Elbow 90o for 34.00 mm outer dia X
32 mm nominal dia threaded
8922 Stainless steel Female Threaded Elbow 90o for 42.70 mm outer dia X
32 mm nominal dia threaded
8923 Stainless steel Female Threaded Elbow 90o for 42.70 mm outer dia X
40 mm nominal dia threaded
8924 Stainless steel Female Threaded Elbow 90o for 48.60 mm outer dia X
40 mm nominal dia threaded
8925 Stainless steel Female Threaded Elbow 90o for 48.60 mm outer dia X
50 mm nominal dia threaded
8926 Stainless steel Male Threaded Elbow 90o for 15.88 mm outer dia X
15 mm nominal dia threaded
8927 Stainless steel Male Threaded Elbow 90o for 22.22 mm outer dia X
15 mm nominal dia threaded
8928 Stainless steel Male Threaded Elbow 900 for 22.22 mm outer dia X
20 mm nominal dia threaded
8929 Stainless steel Male Threaded Elbow 900 for 28.58 mm outer dia X
25 mm nominal dia threaded
8930 Stainless steel MaleThreaded Elbow 900 for 34.00 mm outer dia X
25 mm nominal dia threaded
8931 Stainless steel Male Threaded Elbow 900 for 34.00 mm outer dia X
32 mm nominal dia threaded
8932 Stainless steel Male Threaded Elbow 900 for 42.70 mm outer dia X 32 mm nominal dia
threaded

8933 Stainless steel Male Threaded Elbow 900 for 42.70 mm outer dia X 40 mm nominal dia
threaded
8934 Stainless steel Male Threaded Elbow 900 for 48.60 mm outer dia X 40 mm nominal dia
threaded
8935 Stainless steel Male Threaded Elbow 900 for 48.60 mm outer dia X 50 mm nominal dia
threaded
8936 Stainless steel Cap for 15.88 mm outer dia pipe
8937 Stainless steel Cap for 22.22 mm outer dia pipe
8938 Stainless steel Cap for 28.58 mm outer dia pipe
8939 Stainless steel Cap for 34.00 mm outer dia pipe
8940 Stainless steel Cap for 42.70 mm outer dia pipe
8941 Stainless steel Cap for 48.60 mm outer dia pipe
8942 Stainless steel Pipe Bridge for 15.88 mm outer dia pipe
8943 Stainless steel Pipe Bridge for 22.22 mm outer dia pipe
8944 Stainless steel Pipe Bridge for 28.58 mm outer dia pipe
8945 4 Point facade glass bracket without flat head bolts
8946 2 Point facade glass bracket (wall mounted with out flat head bolt)
8947 1 Point facade glass bracket (wall mounted with out flat head bolt)
8948 Flate head bolt for brackets of spider glazing
8949 400 mm long fin plate without fastners
8953 Micro Silica
8954 Stop end tubes for diaphragmwall 600 mm dia.
8955 Driving end tubes for diaphragm wall 600 mm dia.
8956 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 15 kN/m in the longitudinal and
transverse direction
8957 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 20kN/m in the longitudinal and
transverse direction
8958 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 30kN/m in the longitudinal and
transverse direction
8959 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 40kN/m in the longitudinal and
transverse direction
8960 Geosynthetic Drainage with two filtering nonwoven geotextiles having a “W”
configuration as longitudinal parallel channels. Minimum thickness to be 7.2mm, with
two filtering UV stabilized polypropylene nonwoven geotextile of minimum thickness of
0.75mm having pores of 150 micron and tensile strength of 8.0 kN/m and having plane
flow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure, tensile
strength of 18 kN/m , with mass per unit area of 740 gsm.

8961 Geosynthetic Drainage Composite having thermobonding a draining core - HDPE geonet
comprises of two sets of parallel overlayed ribs integrally connected to have a rhomboidal
shape with a polyethylene film and a nonwoven geotextile having mass per unit area 130
g/m2 and tensile strength of 8.0 kN/m having in plane flow capacity of 0.7 L / (m.s) at
hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 13.5 kN/m , with mass
per unit area of 830 gsm,

8962 Synthetic Geogrid having Ultimate tensile strength- 100 kN/m

8963 Synthetic Geogrid Ultimate tensile strength- 150 kN/m
8964 Synthetic Geogrid Ultimate tensile strength- 200 kN/m
8965 Synthetic Geogrid Ultimate tensile strength- 250 kN/m

8966 Synthetic Geogrid Ultimate tensile strength- 300kN/m

8967 Synthetic Geogrid Ultimate tensile strength- 350kN/m
8968 Synthetic Geogrid Ultimate tensile strength- 400kN/m
8969 Synthetic Geogrid Ultimate tensile strength- 500kN/m
8970 Synthetic Geogrid Ultimate tensile strength- 600kN/m
8971 Synthetic Geogrid Ultimate tensile strength- 700kN/m
8972 Synthetic Geogrid Ultimate tensile strength- 800kN/m
8973 Synthetic Geogrid Ultimate tensile strength- 900kN/m
8974 Synthetic Geogrid Ultimate tensile strength- 1000kN/m
8975 Synthetic Geogrid Ultimate tensile strength- 1100kN/m
8976 Synthetic Geogrid Ultimate tensile strength- 1200kN/m
8977 Aluminium profile industrial troughed sheet of Alloy 31500/31000/ 40800, conforming
to IS 1254, IS 737, IS 2676, 0.71 mm thick, the profile detail width 1044/920 mm, cover
width 1000/875 mm.

8978 Aluminium profile industrial troughed sheet of Alloy 31500/31000/ 40800, conforming
to IS 1254, IS 737, IS 2676, 0.91 mm thick, the profile detail width 1044/920 mm, cover
width 1000/875 mm.

8979 Uni Axial Woven polyster geogrid of minimum tensile strength 40KN/m in the Longitudinal
direction and 20 KN/m in the Transverse direction.
8980 Uni Axial Woven polyster geogrid of minimum tensile strength 60KN/m in the Longitudinal
direction and 20 KN/m in the Transverse direction
8981 Uni Axial Woven polyster geogrid of minimum tensile strength 80 KN/m in the Longitudinal
direction and 30 KN/m in the Transverse direction.
8982 Uni Axial Woven polyster geogrid of minimum tensile strength 100KN/m in the
Longitudinal direction and 30KN/m in the Transverse direction.
8983 Uni Axial Woven polyster geogrid of minimum tensile strength 120KN/m in the
Longitudinal direction and 30KN/m in the Transverse direction.

8984 Uni Axial Woven polyster geogrid of minimum tensile strength 150KN/m in the
Longitudinal direction and 30 KN/m in the Transverse direction.

8985 Uni Axial Woven polyster geogrid of minimum tensile strength 200KN/m in the
Longitudinal direction and 30 KN/m in the Transverse direction.

8986 Uni Axial Woven polyster geogrid of minimum tensile strength 250KN/m in the
Longitudinal direction and 30KN/m in the Transverse direction.

8987 Uni Axial Woven polyster geogrid of minimum tensile strength 300KN/m in the
Longitudinal direction and 30KN/m in the Transverse direction.

8988 Bi Axial Woven polyster geogrid of minimum tensile strength 20KN/m in both Longitudinal
and Transverse direction.
8989 Bi Axial Woven polyster geogrid of minimume tensile strength 40KN/m in both
Longitudinal and Transverse direction.
8990 Bi Axial Woven polyster geogrid of minimum tensile strength 60KN/m in both Longitudinal
and Transverse direction.
9001 C.P. Brass Centre Hole Basin Mixer With Cast Spout
9977 Carriage
9988 Carriage and sundries
9999 Sundries
each 350.00
each 190.00
each 175.00
each 250.00
each 295.00
each 440.00
each 695.00
each 915.00
each 185.00
each 290.00
each 290.00
each 440.00
each 440.00
each 440.00
each 690.00
each 690.00
each 690.00
each 690.00
each 895.00
each 895.00
each 895.00
each 895.00
each 895.00

each 185.00

each 215.00

each 215.00

each 295.00

each 295.00

each 295.00

each 465.00

each 465.00

each 465.00

each 465.00

each 710.00

each 710.00

each 710.00

each 710.00
each 710.00

each 895.00

each 895.00

each 895.00

each 895.00

each 895.00

each 895.00

each 185.00

each 205.00

each 205.00

each 275.00

each 275.00

each 275.00

each 445.00

each 445.00

each 445.00

each 445.00

each 700.00

each 700.00

each 700.00

each 700.00

each 700.00

each 905.00

each 905.00

each 905.00
each 905.00

each 905.00

each 905.00

each 195.00

each 230.00

each 240.00

each 277.00

each 290.00

each 355.00

each 410.00

each 540.00

each 595.00

each 695.00

each 845.00

each 975.00

each 195.00

each 230.00

each 255.00

each 325.00

each 325.00

each 475.00

each 565.00

each 649.00

each 730.00

each 850.00

each 1140.00

each 235.00
each 280.00

each 310.00

each 425.00

each 645.00

each 880.00

each 1210.00

each 160.00

each 215.00

each 215.00

each 215.00

each 295.00

each 480.00

each 480.00

each 710.00

each 710.00

each 195.00

each 225.00

each 225.00

each 225.00

each 290.00

each 290.00

each 480.00

each 480.00

each 695.00

each 695.00

each 48.00
each 70.00
each 90.00
 each 175.00
each 250.00
each 325.00
each 220.00
each 290.00
each 415.00
Nos 3318.00
Nos 1659.00
Nos 1300.00
Nos 651.00
pair 5931.00
kg 28.00
sqm 4.50
sqm 72.00

sqm 120.00

sqm 135.00

sqm 205.00

sqm 290.00

sqm 530.00

sqm 630.00
sqm 200.00
sqm 210.00
sqm 340.00
sqm 350.00

sqm 360.00
sqm 370.00
sqm 450.00
sqm 500.00
sqm 550.00
sqm 650.00
sqm 725.00
sqm 850.00
sqm 950.00
sqm 1000.00
sqm 1050.00
sqm 600.00

sqm 785.00

sqm 139.00

sqm 161.00

sqm 205.00

sqm 237.00

sqm 254.00

sqm 319.00

sqm 375.00

sqm 458.00

sqm 529.00

sqm 114.00

sqm 173.00

sqm 223.00

each 1600.00
L.S. 2.12
L.S. 2.12
L.S. 2.12
 BASIC RATES
0.4 CARRIAGE CODES
(Carriage for 5.0 km lead by Mechanical Transport including loading, Unloading and stacking).

Note: - These rates are exclusive of GST, contractor’s profit and overhead charges.
Code No. Description

Steam coal
0004 Production cost of concrete by batch mix plant

2201 Bricks
2202 Stone aggregate below 40 mm nominal size
2203 Coarse sand
2204 Timber
2205 Steel
2206 Stone aggregate 40 mm nominal size and above
2207 Brick tiles
2208 Lime
2209 Cement
2211 Tar bitumen
2215 Soling stone & masonry stone
2216 Stone blocks white & red sand stone & kota stone slab
2224 S.W. pipes100 mm dia
2225 S.W. pipes150 mm dia
2226 S.W. pipes200 mm dia
2228 S.W. pipes250 mm dia
2229 S.W. pipes300 mm dia
2241 Good earth
2242 Dump manure
2260 Brick aggregate
2261 Sand
2262 Fly ash
2264 Rubbish
2265 Moorum
2266 Surkhi
2267 Stone dust
2268 Marble dust and marble chips
Unloading and stacking).

d overhead charges.
Unit Basic rate
as on or just
before
01.04.2021

tonne 187.35

1000 Nos 437.15

cum 163.93
cum 163.93
cum 187.35
tonne 145.72
cum 178.19
1000 Nos 262.29
cum 163.93
tonne 145.72
tonne 163.93
cum 192.86
tonne 145.72
100 metre 218.58
100 metre 437.15
100 metre 728.59
100 metre 1249.01
100 metre 1561.26
cum 204.92
cum 178.19
cum 178.19
cum 163.93
cum 163.93
cum 163.93
cum 163.93
cum 163.93
cum 163.93
cum 163.93
2271 G.I. pipes below 100 mm dia

2272 Stainless Steel pipe below 100 mm dia

2273 A.C.sheet and accessories
2275 R.C.C. pipes 100 mm dia
R.C.C. pipes 150 mm dia
0004 Production cost of concrete by batch mix plant

2287 R.C.C. pipes 250 mm dia

2290 R.C.C. pipes 300 mm dia
2299 R.C.C. pipes 450 & 500 mm dia
2302 G.I.sheet and accessories
2303 R.C.C. pipes 600, 700, 750 & 800 mm dia
2308 Plaster of paris
2309 Cast iron fittings
2311 Red bajri
2314 Barbed wire
2317 Sludge
2319 Spun iron S & S pipes 100 mm dia
2320 Spun iron S & S pipes 125 mm dia
2321 Spun iron S & S pipes 150 mm dia
2322 Spun iron S & S pipes 200 mm dia
2323 Spun iron S & S pipes 250 mm dia
2324 Spun iron S & S pipes 300 mm dia
2325 Spun iron S & S pipes 350 mm dia
2326 Spun iron S & S pipes 400 mm dia
2327 Spun iron S & S pipes 450 mm dia
2328 Spun iron S & S pipes 500 mm dia
2329 Spun iron S & S pipes 600mm dia
2330 C.I. pipes 500 mm dia
2331 R.C.C. pipes 900 mm dia
2332 R.C.C. pipes 1000 mm dia
2333 R.C.C. pipes 1100 mm dia
2334 R.C.C. pipes 1200 mm dia
2335 Jamuna sand
2336 RCC pipe above 1200 mm dia & up to 1800 mm dia
2341 Pig lead

2342 Solvent/ Diesel

2343 Ductile iron pipes (k7) 100 mm dia
2344 Cast iron pipes 150 mm dia
2345 Cast iron pipes 200 mm dia
2346 Cast iron pipes 250 mm dia
2347 Cast iron pipes 300 mm dia
2348 Cast iron pipes 350 mm dia
2349 Cast iron pipes 400 mm dia
2350 Cast iron pipes 450 mm dia
2351 Cast iron pipes 500 mm dia
2352 Cast iron pipes 600 mm dia
2353 Cast iron pipes 700 mm dia
2355 Cast iron pipes 800 mm dia
2356 Cast iron pipes 900 mm dia
2357 Cast iron pipes 1000 mm dia
2358 Carriage of Bamboo Mat corrugated sheets and accessories
 SUB HEAD : 1.0
CARRIAGE OF MATERIALS
79
 tonne 145.72

tonne 145.72
tonne 145.72
100 metre 358.32
100 metre 597.20
100 metre 1380.48
100 metre 1706.30
100 metre 3981.36
tonne 145.72
100 metre 5972.04
tonne 145.72
tonne 145.72
cum 163.93
tonne 145.72
cum 178.19
100 metre 358.32
100 metre 478.64
100 metre 597.20
100 metre 971.45
100 metre 1380.48
100 metre 1706.30
100 metre 2388.82
100 metre 3257.48
100 metre 3981.36
100 metre 3981.36
100 metre 5972.04
100 metre 3981.36
100 metre 8958.06
100 metre 11944.08
100 metre 11944.08
100 metre 11944.08
cum 163.93
100 metre 11944.08
tonne 145.72

quintal 16.39
100 metre 358.32
100 metre 597.20
100 metre 971.45
100 metre 1380.48
100 metre 1706.30
100 metre 2388.82
100 metre 3257.48
100 metre 3981.36
100 metre 3981.36
100 metre 5972.04
100 metre 5972.04
100 metre 5972.04
100 metre 8958.06
100 metre 11944.08
tonne 17700.00
RIALS
 BASIC RATES (SH: 1.0 CARRIAGE OF MATERIALS)
Code Description
No.
0084 Hire charges of diesel truck - 9 tonne (witout POL)

Beldar
0004 Production cost of concrete by batch mix plant

0115 Coolie
0128 Mate
1235 Diesel
5001 Mobil oil
9999 Sundries
81
SUB HEAD : 1.0 CARRIAGE OF MATERIALS
ATERIALS)
Unit Rate

day 2000.00

day 645.00
day 645.00
day 714.00
litre 80.87
litre 318.00
L.S. 2.12
1.0 CARRIAGE OF MATERIALS
Note:- These rates are inclusive of GST on work contract, Contractor's profit and over heads, Cess etc.
1.1 By Mechanical Transport including loading,unloading and stacking

Item Materials Unit of Rate i/c GST on Work Contract @ 12%, 15% CP & OH and
Code rates 1 km 2 km 3 km 4 km

1 2 3 4 5 6 7
0004 Production cost of concrete cum 144.32 163.18 181.85 199.77
by batch mix plant

1.1.2 Earth cum 180.40 203.98 227.31 249.71

1.1.3 Manure or sludge cum 156.87 177.37 197.66 217.14

1.1.4 Excavated rock cum 288.63 326.37 363.69 399.53

1.1.5 Sand, stone aggregate cum 144.32 163.18 181.85 199.77
below 40 mm nominal size

1.1.6 Stone aggregate 40 mm cum 156.87 177.37 197.66 217.14

nominal size and above
1.1.7 Soling stone cum 169.78 191.98 213.94 235.02
1.1.8 Bricks 1000 Nos. 384.84 435.16 484.93 532.71
1.1.9 Brick Tiles 1000 Nos. 230.91 261.09 290.96 319.63
1.1.10 Cement, stone blocks, tonne 128.28 145.05 161.64 177.57
G.I.. C.I., A.C., & C.C.
pipes below 100 mm dia
and other heavy materials
ds, Cess etc.

@ 12%, 15% CP & OH and 1% Cess Remarks

5 km Beyond Beyond Beyond 5 km
10 km 20 km
upto 10 upto 20 per km per km per
addl. km km km

8 9 10 11 12
199.77 217.16 15.48 12.62 10.18
The rate
applicabl

249.71 271.45 19.35 15.78 12.73 quantitie

217.14 236.04 16.83 13.72 deduction
11.07
cribed perc

399.53 434.32 30.96 25.25 20.36 voids men

199.77 217.16 15.48 12.62 10.18 the specific
subhead "C
Materials"
217.14 236.04 16.83 13.72 11.07

235.02 255.48 18.21 14.85 11.98

532.71 579.09 41.28 33.66 27.15
319.63 347.46 24.77 20.20 16.29
177.57 193.03 13.76 11.22 9.05

s will be
e to net
s after
of pres-
entage for tioned in ation nder arriage of
 Code rates 1 km 2 km 3 km

1.1.11 Steel tonne 128.28 145.05 161.64

1.1.12 Timber cum 164.93 186.50 207.83
Tar Bitumen tonne 144.32 163.18 181.85
0004 Production cost of concrete by batch mix plant

1.1.14 Solvent, diesel qtl 14.43 16.32 18.18

1.1.15 Steam coal tonne 164.93 186.50 207.83
1.1.16 S.W. pipe
1.1.16.1 100 mm dia 100 m 192.42 217.58 289.55
1.1.16.2 150 mm dia 100 m 384.84 435.16 484.93
1.1.16.3 200 mm dia 100 m 641.41 725.26 808.21
1.1.16.5 250 mm dia 100 m 1099.56 1243.30 1385.50
1.1.16.6 300 mm dia 100 m 1374.45 1554.13 1731.88
1.1.16.7 350 mm dia 100 m 1924.22 2175.78 2424.63
1.1.16.8 400 mm dia 100 m 2748.89 3108.26 3463.75
1.1.16.9 450 mm dia 100 m 3498.59 3955.97 4408.41
1.1.16.10 500 mm dia 100 m 3848.45 4351.56 4849.25
1.1.16.11 600 mm dia 100 m 4810.56 5439.46 6061.56
1.1.17 R.C.C. pipe,
A.C. pipes, steel
cylinder, R.C. pipes,
S.C.I. pipes, C.I. pipes
and unreinforced
cement pipes

1 2 3 4 5 6 7 8 9
 4 km 5 km Beyond Beyond Beyond

177.57 193.03 13.76 11.22 9.05

228.30 248.18 17.69 14.43 11.64
199.77 217.16 15.48 12.62 10.18
19.98 21.72 1.55 1.26 1.02
228.30 248.18 17.69 14.43 11.64

266.36 289.55 20.64 16.83 13.58

532.71 579.09 41.28 33.66 27.15
887.85 965.15 68.80 56.11 45.25
1522.03 1654.55 117.94 96.19 77.58
1902.54 2068.19 147.42 120.23 96.97
2663.56 2895.46 206.39 168.32 135.76
3805.08 4136.38 294.84 240.46 193.94
4842.83 5264.48 375.25 306.04 246.83
5327.11 5790.93 412.77 336.65 271.52
6658.89 7238.66 515.97 420.81 339.40

5 km 10 km 20 km
upto 10 upto 20 per
km per km per addl.
km km km
7 8 9 10 11 12
 Code rates 1 km 2 km 3 km

1.1.17.1 100 mm dia 100 m 315.45 356.69 397.48

1.1.17.2 125 mm dia 100 m 421.36 476.45 530.94
0004 150 mm dia 100 m 525.74 594.48 662.47
Production
1.1.17.4 200 mm dia 100 m 855.21 967.01 1077.61
cost of
1.1.17.5
concrete by 250 mm dia 100 m 1215.30 1374.18 1531.34
batch mix
1.1.17.6 300 mm dia 100 m 1502.13 1698.50 1892.76
plant
1.1.17.7 350 mm dia 100 m 2102.98 2377.90 2649.86
1.1.17.8 400 mm dia 100 m 2867.70 3242.60 3613.45
1.1.17.9 450 mm & 100 m 3504.96 3963.17 4416.44
500 mm dia
1.1.17.10 600, 700, 750 & 100 m 5257.44 5944.76 6624.66
800 mm dia
1.1.17.11 900 mm dia 100 m 7886.16 8917.14 9936.99
1.1.17.12 1000, 1100 & 100 m 10514.88 11889.52 13249.32
1200 mm dia

1 2 3 4 5 6 7 8 9
Code No. Description

1.1.18 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mecha
loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, com
Engineer-in-charge.

Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of lo
3.5 cum or more.
 4 km 5 km Beyond Beyond Beyond

436.65 474.67 33.83 27.59 22.26

583.26 634.04 45.19 36.86 29.73
727.75 791.11 56.39 45.99 37.09
1183.80 1286.87 91.73 74.81 60.34
1682.25 1828.71 130.35 106.31 85.74
2079.28 2260.32 161.11 131.40 105.98
2910.99 3164.44 225.56 183.96 148.37
3969.53 4315.15 307.58 250.86 202.32
4851.65 5274.07 375.93 306.60 247.28

7277.47 7911.11 563.90 459.90 370.93

10916.21 11866.66 845.85 689.85 556.39

14554.95 15822.21 1127.80 919.80 741.85

5 km 10 km 20 km
upto 10 upto 20 per
km per km per addl.
km km km
7 8 9 10 11 12
on Unit Rate

mantled or waste material by mechanical transport including

for lead upto 10 km for all lifts, complete as per directions of

cum 411.30
ed hours for movement/ plying of load carrying motor vehicle of
 1.0 CARRIAGE OF MATERIALS
Note:- These rates are inclusive of GST on work contract, Contractor's profit and over heads, Cess etc.
1.2 By Manual Labour including loading, unloading and stacking for lead less than 0.50 KM
0004
Code
Production Material Unit Cost of carriage Every additional Remarks
cost
No. of inclusing loading, lead of 50 metre
concrete
by batch unloading & or part thereof
mix plant stacking for first beyond 1st 50
50 metres metre upto 9
( ) such additional
lead ( )

1 2 3 4 5 6

1.2.1 Lime, moorum, building cum 187.24 40.77

The rates ill be applicable to ne
rubbish quantities after
deduction of prescribed
1.2.2 Earth cum 234.05 50.96 percentage for voids
1.2.3 Manure or sludge cum 203.52 44.31

1.2.4 Excavated rock cum 374.48 81.54

1.2.5 Sand, stone aggregate below 40 cum 234.05 50.96
mm nominal size

1.2.6 Stone aggregate 40 mm nominal cum 253.03 55.09

size and above
subhead "Carriage of Materials"

1.2.7 Soling stone cum 275.35 59.95

1.2.8 Bricks 1000 Nos 436.90 95.13
1.2.9 Brick Tiles 1000 Nos 273.06 59.45
1.2.10 Steam Coal tonne 164.06 47.56
1.2.11 Stone blocks,G.I.,C.I. tonne 170.89 25.08
Stainless Steel pipes
below 100 mm dia and
other heavy material

1.2.12 Cement tonne 135.55 19.89

1.2.13 Steel tonne 291.14 42.72
1.2.14 Timber cum 187.16 27.46
1.2.15 Tar, bitumen etc. tonne 170.89 25.08
1.2.16 S.W. pipe The length of S.W. pipes
1.2.16.1 100 mm dia 100 m 342.07 will be measured
50.19
exclusive of the internal
1.2.16.2 150 mm dia 100 m 562.28 82.51 depth of sockets.
1.2.16.3 200 mm dia 100 m 786.86 115.46
 1.2.16.5 250 mm dia 100 m 1310.12 192.25
1 2 3 4 5 6
1.2.16.6 300 mm dia 100 m 1871.60 274.64

1.2.16.7 350 mm dia 100 m 2620.24 384.49

1.2.16.8 400 mm dia 100 m 3275.30 480.61
1.2.16.9 450 mm dia 100 m 3970.06 582.56
1.2.16.10 500 mm dia 100 m 4852.29 712.02
1.2.16.11 600 mm dia 100 m 5955.08 873.84
1.2.17 R.C.C. pipes, Steel
cylinder, R.C. pipes,
C.I. pipes, and
unreinforced
cement pipes
1.2.17.1 100 mm dia 100 m 461.85 67.77 The length of the flanged or

1.2.17.2 125 mm dia 100 m 565.11 plain ended concrete, R.C.C.

82.92
pipes, Steel cylinders, R.C.
1.2.17.3 150 mm dia 100 m 650.72 95.49 pipes and C.I. pipes shall be measu
1.2.17.4 200 mm dia 100 m 976.49 overall. The length
143.29
of socketed pipes shall be
1.2.17.5 250 mm dia 100 m 1716.31 251.85 measured exclusive of inter-
nal depth of sockets.
1.2.17.6 300 mm dia 100 m 2147.73 315.16
1.2.17.7 350 mm dia 100 m 3070.59 450.58
1.2.17.8 400 mm dia 100 m 3573.05 524.31
1.2.17.9 450 mm & 100 m 4764.07 699.08
500 mm dia
1.2.17.10 600, 700, 750 & 100 m 5240.47 768.98
800 mm dia
d over heads, Cess etc.
ess than 0.50 KM

additional Remarks
f 50 metre
t thereof
d 1st 50
upto 9
additional

The rates ill be applicable to net

tities after
deduction of prescribed
percentage for voids
mentioned in the
specification under
4
6

subhead "Carriage of Materials"

5
3
5
6
8

9
2
6
8
The length of S.W. pipes
be measured
exclusive of the internal
depth of sockets.
46
5

9
1
6
2
4

7 The length of the flanged or

ended concrete, R.C.C.

pipes, Steel cylinders, R.C.
pipes and C.I. pipes shall be measured
. The length
of socketed pipes shall be
measured exclusive of inter-
pth of sockets.
6
8
1
8

8
Code Description Unit Rate
No.
1 2 3 4
1.3 Loading in or unloading cement from tonne 139.65
the railway wagons at siding and carrying the same
from or into godowns adjacent to the siding, in- cluding
stacking the same properly in rows upto any height as
per di- rection of Engineer-in-charge, sweeping the
wagons and screen- ing the swept cement and filling in
bags complete.
1.4 Loading in or unloading from the railway
wagons as per direction
of Engineer-in-charge :

0004 Production cost of concrete by batch mix plant

1.4.2 G.I., C.I., R.C.C. or C.C. pipes upto tonne 122.70

500 mm dia and similar heavy materials
1.4.3 Heavy materials where each piece tonne 218.10 No deduction shall be from
or bundle, crate or case weighs more carriage rates for direct unloading
than one tonne and R.C.C., C.I. and or loading. concrete pipes above 500 mm dia.
SUB HEAD : 2.0
EARTH WORK

89
 Remarks

5
5

deduction shall be from

for direct unloading
oncrete pipes above 500 mm dia.
 BASIC RATES (SH: 2.0 EARTH WORK)
Code Description
No.
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne

Hire and running charges of tipper

0004 Production cost of concrete by batch mix plant

0018 Hire and running charges of loader

0020 Hydraulic Excavator (3D) with driver and fuel
0101 Bhisti
0103 Blacksmith 2nd class
0112 Carpenter 2nd class
0113 Chowkidar
0114 Beldar
0115 Coolie
0124 Mason (brick layer) 2nd class
0128 Mate
0132 Rock Excavator
0133 Rock Breaker
0134 Rock Hole Driller
0135 Stone Chiseller
0302 Safeda ballies 125 mm diameter
0325 Blasting powder
0326 Blasting fuse (fuse wire)
0771 Kerosene oil
1197 Second class kail wood in scantling
1198 Second class kail wood in planks
1235 Diesel
1980 Fly ash
2204 Carriage of Timber
2262 Carriage of Flyash
2335 Carriage of sand
2342 Carriage of Solvent / Diesel.
6501 Sand zone V (Jamuna)
7022 Chlorpyriphos 20% E.C. / Lindane 20% E.C.
9999 Sundries
ORK)
Unit Rate

day 3000.00

day 3750.00
day 6000.00
day 7000.00
day 714.00
day 714.00
day 714.00
day 645.00
day 645.00
day 645.00
day 714.00
day 714.00
day 645.00
day 645.00
day 645.00
day 714.00
metre 40.00
kg 40.00
each 15.00
litre 50.00
10 cudm 260.00
10 cudm 260.00
litre 80.87
cum 11.00
cum 187.35
cum 163.93
cum 163.93
quintal 16.39
cum 1300.00
litre 150.00
L.S. 2.12
 2.0 E A R T H W O R K
Code Description
No.
2.1
0004 Earth work in surface excavation not exceeding 30 cm in depth but exceeding
Production 1.5 m in width as well as 10 sqm on plan including getting out and disposal of
cost of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-
concrete Charge:
by batch
mix plant 2.1.1 All kinds of soil
2.2 Earth work in rough excavation, banking excavated earth in layers not exceeding
20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or
wooden or steel rammers, and rolling every 3rd and top-most layer with power
roller of minimum 8 tonnes and dressing up in embankments for roads, flood
banks, marginal banks and guide banks or filling up ground depressions, lead
upto 50 m and lift upto 1.5 m :

2.2.1 All kinds of soil

2.3 Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods,
watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and
rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and
dressing up, in embankments for roads, flood banks, marginal banks, and guide
banks etc., lead upto 50 m and lift upto 1.5 m :

2.3.1 All kinds of soil

2.4 Deduct for not rolling with power roller of minimum 8 tonnes for banking
excavated earth in layers not exceeding 20 cm in depth.

2.5 Deduct for not watering the excavated earth for banking
2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual
means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm
on plan) including getting out and disposal of excavated earth lead upto 50 m
and lift upto 1.5 m, as directed by Engineer-in- charge.

2.6.1 All kinds of soil

2.7 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual
means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm
on plan) including getting out and disposal of excavated earth lead upto 50 m
and lift upto 1.5 m, as directed by Engineer-in- charge.

2.7.1 Ordinary rock

2.7.2 Hard rock (requiring blasting)
2.7.3 Hard rock (blasting prohibited)
2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual
means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm
on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and disposal of surplus excavated soil as
directed, within a lead of 50 m.

2.8.1 All kinds of soil.

Unit Rate

sqm 107.00

cum 862.70

cum 543.40

cum 4.40

cum 38.20

cum 205.45

cum 412.95
cum 711.35
cum 1184.30

cum 286.85
2.9 Excavation work by mechanical means (Hydraulic excavator)/ manual
means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the
excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

2.9.1 Ordinary rock

2.9.2 Hard rock (requiring blasting)
2.9.3 Hard rock (blasting prohibited)
0004 Production cost of concrete by batch mix plant

2.10.1 All kinds of soil

2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia.
2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but
not exceeding 300 mm dia
2.10.1.3 Pipes, cables etc. exceeding 300 mm dia but
not exceeding 600 mm
2.11 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth
exceeding 1.5 m, but not exceeding 3 m. (Rate is over
corresponding basic item for depth upto 1.5 metre).
2.12 Extra for excavating trenches for pipes, cables, etc, in all kinds of soil for depth
exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for
depth upto 1.5 metre.)

2.13 Excavating trenches of required width for pipes, cables, etc, including excavation
for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil
as required in layers not exceeding 20 cm in depth, including consolidating each deposited
layers by ramming, watering etc., stacking serviceable material for measurements and
disposal of unserviceable material as directed, within a lead of 50 m :

2.13.1 Ordinary rock :

2.13.1.1 Pipes, cables etc. not exceeding 80 mm dia
2.13.1.2 Pipes, cables etc. exceeding 80 mm dia but
not exceeding 300 mm dia
2.13.1.3 Pipes, cables exceeding 300 mm dia but not
exceeding 600 mm dia
2.13.2 Hard rock (requiring blasting)
2.13.2.1 Pipes, cables etc. not exceeding 80 mm dia
2.13.2.2 Pipes, cables etc. exceeding 80 mm dia but
not exceeding 300 mm dia
2.13.2.3 Pipes, cables etc. exceeding 300 mm dia but
not exceeding 600 mm dia
 cum 523.50
cum 846.25
cum 1258.60

metre 255.55

metre 417.35

metre 651.55

metre 127.00

metre 314.95

metre 376.95

metre 933.35

metre 1074.00

metre 531.85

metre 1316.90

metre 1515.20
 2.13.3 Hard rock (blasting prohibited)
2.13.3.1 Pipes, cables etc. not exceeding 80 mm dia
2.13.3.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding
300 mm dia

2.13.3.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding
600 mm dia

0004 Production cost of concrete by batch mix plant

2.15 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock
exceeding 3m in depth but not exceeding 4.5 m. (Rate is over correspondingbasic item for
depth upto 1.5 metre)

2.16 Close timbering in trenches including strutting, shoring and packing cavities
(wherever required) complete. (Measurements to be taken of the face area timbered).

2.16.1 Depth not exceeding 1.5 m

2.16.2 Depth exceeding 1.5 m but not exceeding 3 m
2.16.3 Depth exceeding 3 m but not exceeding 4.5 m
2.17 Close timbering in case of shafts, wells, cesspits, manholes and the like including
strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to
be taken of the face area timbered).

2.17.1 Depth not exceeding 1.5 m

2.17.2 Depth exceeding 1.5 m but not exceeding 3 m
2.17.3 Depth exceeding 3 m but not exceeding 4.5 m
2.18 Close timbering over areas including strutting, shoring and packing cavities
(wherever required) etc. complete. (Measurements to be taken of the face area timbered):

2.18.1 Depth not exceeding 1.5 m

2.18.2 Depth exceeding 1.5 m but not exceeding 3 m
2.18.3 Depth exceeding 3 m but not exceeding 4.5 m
2.19 Extra for planking, strutting and packing materials for cavities (in close timbering)
if required to be left permanently in position. (Face area of timber permanently left to be
measured).

2.20 Open timbering in trenches including strutting and shoring complete

(measurements to be taken of the face area timbered):
2.20.1 Depth not exceeding 1.5 m
2.20.2 Depth exceeding 1.5 m but not exceeding 3 m
2.20.3 Depth exceeding 3 m but not exceeding 4.5 m
metre 726.65

metre 1799.35

metre 2070.50

metre 103.75

metre 256.15

sqm 132.90
sqm 145.55
sqm 174.00

sqm 142.50
sqm 169.35
sqm 197.60

sqm 119.10
sqm 134.20
sqm 149.95

sqm 1596.50

sqm 68.55
sqm 76.40
sqm 89.35
2.21 Open timbering in case of shafts, wells, cesspits, manholes and the
like including strutting and shoring complete (Measurements to be taken of the face area
timbered):
2.21.1 Depth not exceeding 1.5 m
2.21.2 Depth exceeding 1.5 m but not exceeding 3 m
2.21.3 Depth exceeding 3 m but not exceeding 4.5 m
0004 Production cost of concrete by batch mix plant

2.22.1 Depth not exceeding 1.5 m

2.22.2 Depth exceeding 1.5 m but not exceeding 3 m
2.22.3 Depth exceeding 3 m but not exceeding 4.5 m
2.23 Extra for planking and strutting in open timbering if required to be left permanently
in position. (Face area of the timber permanently left to be measured).

2.24 Extra rates for quantities of works, executed:

2.24.1 In or under water and/or liquid mud, including pumping out water as
required
2.24.2 In or under foul position, including pumping out water as required

Note for item no. 2.24:- The extra percentage rate is applicable in respect of each
item but limited to quantities of work executed in these difficult conditions. The unit,
namely, metre depth, to be considered for payment, shall be the depth measured
from the sub soil water level up to the centre of gravity of the qty executed in
difficult conditions. The depth shall be reckoned correct to 0.10 m, 0.05 m or more
shall be taken as
0.10 m and less than 0.05 m ignored.

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

2.25(a) Excavating, supplying and filling of local earth (including royalty) by mechanical
transport upto a lead of 5km also including ramming and watering of the earth in layers not
exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking
excavated or stacked materials.
2.26.1 All kinds of soil
2.26.2 Ordinary or hard rock
2.27 Supplying and filling in plinth with sand under floors, including watering, ramming,
consolidating and dressing complete.
sqm 62.35
sqm 74.95
sqm 91.60

sqm 42.40
sqm 50.80
sqm 64.30

sqm 822.05

metre depth 20%

metre depth 25%

cum 253.95

cum 368.65

cum 104.50
cum 187.40

cum 2161.20
 2.28 Surface dressing of the ground including removing vegetation and in-
equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
2.28.1 All kinds of soil sqm 28.15
2.29 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same.

2.29.1 All kinds of soil

2.30 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the
excavated soil, then returning the soil as required in layers not exceeding 20cm in depth,
including consolidating each deposited layer by ramming, watering etc, disposing of
surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m.

2.30.1 All kinds of soil

0004 Production cost of concrete by batch mix plant
2.30.3 Hard rock (requiring blasting)
2.30.4 Hard rock (blasting prohibited)
2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees
and saplings of girth up to 30 cm measured at a height of 1 m above ground level and
removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

2.32 Clearing grass and removal of the rubbish up to a distance of 50 m outside the
periphery of the area cleared.

2.33 Felling trees of the girth (measured at a height of 1 m above ground level),
including cutting of trunks and branches, removing the roots and stacking of serviceable
material and disposal of unserviceable material.

2.33.1 Beyond 30 cm girth upto and including 60 cm girth

2.33.2 Beyond 60 cm girth upto and including 120 cm girth
2.33.3 Beyond 120 cm girth upto and including 240 cm girth
2.33.4 Above 240 cm girth
2.34 Supplying chemical emulsion in sealed containers including delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL
anti-termite treatment (excluding the cost of chemical emulsion) :
2.35.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vert
surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complet
2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration metre 32.30
d lift up to 1.5 m.
28.15
ring the same.

sqm 28.50

each 89.90
each 160.90
each 257.70
each 381.40

sqm 14.50

sqm 7.40

each 439.25
each 1957.15
each 9084.05
each 18198.70

litre 200.90
AL

ulsion @ 7.5 litres / sqm of the vertical

ong the wall & rodding etc. complete:
 2.35.2 Along the external wall below concrete or masonry apron us-
ing chemical emulsion @ 2.25 litres per linear metre includ- ing drilling and
plugging holes etc.:
2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration
2.35.3 Treatment of soil under existing floors using chemical emul-
0004 Production cost of concrete by batch mix plant
12 mm diameter holes and plugging with cement mortar 1 :2
(1 cement : 2 Coarse sand) to match the existing floor:
2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration
2.35.4 Treatment of existing masonry using chemical emulsion @
one litre per hole at 300 mm interval including drilling holes at
45 degree and plugging them with cement mortar 1:2 (1 ce-
ment : 2 coarse sand) to the full depth of the hole :
2.35.4.1 With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration
2.35.5 Treatment at points of contact of wood work by chemical
emulsion Chlorpyriphos/ Lindane (in oil or kerosene based
solution) @ 0.5 litres per hole by drilling 6 mm dia holes at
downward angle of 45 degree at 150 mm centre to centre and
sealing the same.
2.36 Extra for levelling & neatly dressing of disposed soil completely as directed by
Engineer-in-charge.

2.37 Supply and stacking of Fly ash conforming to IRC- 58 at site, including carriage,
loading , unloading & stacking up to any lead (measured stacks will be reduced by 20% for
payment).

2.38 Filling with available fly ash and earth (excluding rock) in trenches or embankment
in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth
(Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer
of filling shall be done with earth having total minimum compacted thickness 30 cm or as
decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and
watering, all complete as per drawing and

direction of Engineer -in - charge.

SUB HEAD : 3.0
MORTAR

99
metre 44.70

sqm 256.15

metre 35.75

metre 257.55

cum 76.70

cum 234.05

cum 253.95
 BASIC RATES (SH : 3.0 MORTAR)
Code Description
No.
0101 Bhisti

Beldar
0004 Production cost of concrete by batch mix plant

0367 Portland Cement (OPC-43 Grade)

0368 White Cement
0773 Unslaked lime
0784 Marble dust/ powder
0811 Mud (dry)
0982 Coarse sand (zone III)
0983 Fine sand (zone IV)
1159 Stone dust
1182 Surkhi
2203 Carriage of Coarse sand
2208 Carriage of Lime
2209 Carriage of Cement
2261 Carriage of Fine sand (1 part of badarpur sand: 2 parts jamuna sand)
2267 Carriage of Stone dust
2268 Carriage of Marble dust and/or marble chips
9999 Sundries
R)
Unit Rate

day 714.00

day 645.00
tonne 5000.00
tonne 11200.00
quintal 300.00
cum 1130.00
cum 165.00
cum 1500.00
cum 900.00
cum 1100.00
cum 700.00
cum 163.93
cum 163.93
tonne 145.72
cum 163.93
cum 163.93
cum 163.93
L.S. 2.12
 3.0 MORTAR
Note : These rates are exclusive of GST, water charges, contractor's profit and overheads & cess.
Code Description
No.
0004 Production cost of concrete by batch mix plant
Cement mortar 1:1 (1 cement : 1 fine sand)

3.2 Cement mortar 1:2 (1 cement : 2 fine sand).

3.3 Cement mortar 1:3 (1 cement : 3 fine sand).

3.4 Cement mortar 1:4 (1 cement : 4 fine sand).

3.5 Cement mortar 1:5 (1 cement : 5 fine sand).

3.6 Cement mortar 1:6 (1 cement : 6 fine sand).

3.7 Cement mortar 1:2 (1 cement : 2 coarse sand).

3.8 Cement mortar 1:3 (1 cement : 3 coarse sand).

3.9 Cement mortar 1:4 (1 cement : 4 coarse sand).

3.10 Cement mortar 1:5 (1 cement : 5 coarse sand).

3.11 Cement mortar 1:6 (1 cement : 6 coarse sand).

3.12 Cement mortar 1:2 (1 cement : 2 stone dust).

3.13 Cement mortar 1:2 (1 cement : 2 marble dust).

3.14 Cement mortar 1:5 (1 cement : 5 marble dust).

3.15 White cement mortar 1:2 (1 white cement : 2 marble dust).

3.16 White cement mortar 1:3 (1 white cement : 3 marble dust).

3.17 White cement mortar 1:5 (1 white cement : 5 marble dust).

3.18 Mud mortar

3.19 Mortar in lime, surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5
 SUB HEAD : 4.0
CONCRETE WORK

103
verheads & cess.
Unit Rate

cum 6626.10

cum 5129.25

cum 4382.15

cum 3713.20

cum 3353.00

cum 3044.30

cum 5699.25

cum 5024.15

cum 4355.20

cum 3995.00

cum 3686.30

cum 5319.25

cum 5347.75

cum 3599.10

cum 9563.75

cum 7790.25

cum 5521.10

cum 823.15

cum 3140.50
K
 BASIC RATES (SH: 4.0 CONCRETE WORK)
Code No. Description

0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

0004 Production cost of concrete by batch mix plant

Pumping charges of concrete including Hire charges of pump, piping work &
0004 Production cost of concrete by batch mix plant

accessories etc.

0011 Hire charges of Pump set of capacity 4000 litres/hour

0012 Vibrator (Needle type 40 mm)
0029 Carriage of ready mixed concrete by rotatory transit mixer
0101 Bhisti
0114 Beldar
0115 Coolie
0116 Fitter (grade 1)
0123 Mason (brick layer) 1st class
0124 Mason (brick layer) 2nd class
0131 Painter
0278 Manufactured sand derived from Recycled Concrete Aggregate (RCA)
0279 Recycled Concrete Aggregate (RCA) 20 mm nominal size
0280 Recycled Concrete Aggregate (RCA) 12.5 mm nominal size
0281 Recycled Concrete Aggregate (RCA) 10 mm nominal size
0282 Recycled Aggregate (RA) 40 mm nominal size
0283 Recycled Aggregate (RA) 20 mm nominal size
0284 Recycled Aggregate (RA) 10 mm nominal size
0287 Brick Aggregate (Single size) : 40 mm nominal size
0293 Stone Aggregate (Single size) : 40 mm nominal size
0295 Stone Aggregate (Single size) : 20 mm nominal size
0296 Stone Aggregate (Single size) : 12.5 mm nominal size
0297 Stone Aggregate (Single size) : 10 mm nominal size
0309 Paving bitumen of grade VG-10 of approved quality
0367 Portland Cement (OPC-43 Grade)
0370 Coal (steam)
0771 Kerosene oil
0982 Coarse sand (zone III)
0983 Fine sand (zone IV)
1213 Water proofing materials
1880 Dismenteled P or S trap scrap (approx wt 2kg)
2202 Carriage of Stone aggregate below 40 mm nominal size
2203 Carriage of Coarse sand
2206 Carriage of Stone aggregate 40 mm nominal size and above
2209 Carriage of Cement
2211 Carriage of Tar / Bitumen
2260 Carriage of Brick aggregate
2261 Carriage of Fine sand (1 part of badarpur sand: 2 parts jamuna sand)
2262 Carriage of Flyash
7318 Plasticizer / super plasticizer
7319 Wall form panel 1250x500 mm
7326 Corner angle 45x45x5 mm 1.50 m long
7327 100 mm channel shoulder 2.5 m long
7328 Double clip (bridge clip)
7329 Single clip
7330 M.S. tube 40 mm dia
7331 Wall form panel 1250x450 mm
7332 Corner angle 45x45x5 mm 2.50 m long
7333 Column clamp 450x1070 mm
7334 Prop 2 m ( 2-3.5 m)
8732 Synthetic ployster triangular fibre of length 12 mm, effective diameter 10-40
microns and specific gravity of 1.34 to 1.40

9977 Carriage
9988 Carriage and sundries
9999 Sundries
WORK)
Unit Rate

day 800.00

cum 400.00

cum 210.00

day 700.00
day 350.00
km/cum 37.30
day 714.00
day 645.00
day 645.00
day 784.00
day 784.00
day 714.00
day 714.00
cum 741.00
cum 957.00
cum 957.00
cum 957.00
cum 367.00
cum 398.00
cum 430.00
cum 650.00
cum 1300.00
cum 1400.00
cum 1350.00
cum 1350.00
tonne 25614.00
tonne 5000.00
quintal 440.00
litre 50.00
cum 1500.00
cum 900.00
kilogram 35.00
 kg 25.00
cum 163.93
cum 163.93
cum 178.19
tonne 145.72
tonne 163.93
cum 178.19
cum 163.93
cum 163.93
kg 29.00
each 860.00
each 240.00
each 910.00
each 76.00
each 59.00
metre 215.00
each 860.00
each 255.00
each 965.00
each 635.00

kg 370.00

L.S. 2.12
L.S. 2.12
L.S. 2.12
 4.0 CONCRETE WORK

Code No. Description

CEMENT CONCRETE (CAST IN SITU)

0004
Production
4.1 Providing and laying in position cement concrete of specified grade excluding
cost of the cost of centering and shuttering - All work up to plinth level :
concrete
by batch
mix plant 4.1.2 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from
natural sources : 3 graded stone aggregate 20 mm nominal
size derived from natural sources)
4.1.2A 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including
manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25%
: 3 graded stone aggregate 20 mm nominal
size Recycled Concrete Aggregate (RCA) upto 25%).
4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources
: 4 graded stone aggregate 20 mm nominal size
derived from natural sources)
4.1.3A 1:2:4 (1 cement : 2 coarse sand (zone-III) including
manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25%
: 4 graded stone aggregate 20 mm nominal
size Recycled Concrete Aggregate (RCA) upto 25%)
4.1.4 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources
: 4 graded stone aggregate 40 mm nominal size derived from natural sources)

4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources
: 6 graded stone aggregate 20 mm nominal size
derived from natural sources)
4.1.5A 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled
Concrete Aggregate (RCA) : 6 graded stone aggregate 20
mm nominal size Recycled Concrete Aggregate (RCA) )
4.1.5B 1:3:6 (1 cement : 3 manufactured sand derived from Recycled
concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm
nominal size Recycled Aggregate (RA) )
4.1.6 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources
: 6 graded stone aggregate 40 mm nominal size
derived from natural sources)
4.1.6A 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled
Concrete Aggregate (RCA) : 6 graded stone aggregate 40 mm nominal size
Recycled Aggregate (RA) )

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources
: 8 graded stone aggregate 40 mm nominal size
derived from natural sources)
4.1.8A 1:4:8 (1 cement : 4 manufactured sand derived from Recycled
Concrete Aggregate (RCA) : 8 graded stone aggregate 40
mm nominal size Recycled Aggregate (RA)
Unit Rate

cum 7783.65

cum 7555.05

cum 7365.15

cum 7124.50

cum 7226.95

cum 6833.40

cum 5815.05

cum 5122.25

cum 6670.25

cum 5059.85

cum 6326.05

cum 4715.60
 4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural
sources : 10 graded stone aggregate 40 mm nominal size
derived from natural sources)
4.1.10A 1:5:10 (1 cement : 5 manufactured sand derived from Recycled
Concrete Aggregate (RCA) : 10 graded stone aggregate 40
mm nominal size Recycled Aggregate (RA) )
1:5:10 (1 cement : 5 fine sand derived from natural sources : 10
0004 Production cost of concrete by batch mix plant

graded stone aggregate 40 mm nominal size derived from

natural sources)
4.1.12 1:2:3½:9 (1 ordinary portland cement : 2 Fly ash : 3½ coarse sand
(zone-III) derived from natural sources : 9 graded stone
aggregate 40 mm nominal size derived from natural sources)
4.1.12A 1:2:3½:9 (1 ordinary portland cement : 2 Fly ash : 3½
manufactured sand derived from Recycled Concrete Aggregate (RCA)
: 9 graded stone aggregate 40 mm nominal size
Recycled Aggregate (RA) )
4.1.13 1:2½:4:11 (1 ordinary portland cement : 2½ fly ash : 4 coarse sand
(zone-III) derived from natural sources : 11 graded stone
aggregate 40 mm nominal size derived from natural sources)
4.1.13A 1:2½:4:11 (1 ordinary portland cement : 2½ fly ash : 4
manufactured sand derived from Recycled Concrete Aggregate (RCA)
:11 graded stone aggregate 40 mm nominal size
Recycled Aggregate (RA) )
4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any
thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,
buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain
window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering,
shuttering and finishing:

4.2.2 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural

sources : 3 graded stone aggregate 20 mm nominal
size derived from natural sources).
4.2.2A 1:1½:3 (1 cement : 1½ coarse sand (zone-III) including
manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
25% : 3 graded stone aggregate 20 mm nominal
size Recycled Concrete Aggregate (RCA) upto 25%) ).
4.2.3 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural
sources : 4 graded stone aggregate 20 mm nominal size
derived from natural sources)
4.2.3A 1:2:4 (1 Cement : 2 coarse sand (zone-III) including manufactured
sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded
stone aggregate 20 mm nominal
size Recycled Concrete Aggregate (RCA) upto 25%)).
4.2.5 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources :
6 graded stone aggregate 20 mm nominal size
derived from natural sources)
cum 6050.65

cum 4440.25

cum 5660.45

cum 6154.75

cum 4645.90

cum 5812.60

cum 4334.20

cum 9793.75

cum 9565.10

cum 9375.20

cum 9130.20

cum 8843.45
 4.2.5A 1:3:6 (1 cement : 3 manufactured sand derived from Recycled
Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal
size Recycled Concrete Aggregate (RCA))

4.2.5B 1:3:6 (1 cement : 3 manufactured sand derived from Recycled Concrete

Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size
Recycled Aggregate (RA))

4.2.8 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural

sources : 10 graded stone aggregate 40 mm nominal size derived from
natural sources).

4.2.8A 1:5:10 (1 cement : 5 manufactured sand derived from Recycled

Concrete Aggregate (RCA) : 10 graded stone aggregate 40
mm nominal size Recycled Aggregate (RA))

0004 Production cost of concrete by batch mix plant

4.3.1 Foundations, footings, bases for columns

4.3.2 Retaining walls, return walls, walls (any thickness) including attached
pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

4.3.3 Columns, piers, abutments, pillars, posts and struts

4.4 Providing and laying cement concrete in kerbs, steps and the like at or near ground
level excluding the cost of centering, shuttering and finishing.

4.4.1 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources

: 3 graded stone aggregate 20 mm nominal size derived from natural sources)

4.4.1A 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) including manufactured

sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 3 graded stone
aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 25%)).

CEMENT CONCRETE PRECAST

4.5 Providing and fixing up to floor five level precast cement concrete string or lacing
courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair
cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3
coarse sand), cost of required Centering complete.

4.5.1 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources
: 3 graded stone aggregate 20mm nominal size derived from natural sources)

4.5.1A 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) including

manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% :
3 graded stone aggregate 20mm nominal
size Recycled Concrete Aggregate (RCA) upto 25%))
cum 7825.10

cum 7132.35

cum 8047.55

cum 6437.15

sqm 307.95

sqm 669.55
sqm 804.25

cum 7783.65

cum 7555.05

cum 9277.75

cum 9050.20
4.6 Providing and fixing at or near ground level precast cement concrete in
kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1
Cement : 3 coarse sand), including the cost of required centering, shuttering complete.

4.6.1 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural

sources: 3 graded stone aggregate 20 mm nominal size derived from natural
sources).

4.6.1A 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including

manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
25% : 3 graded stone aggregate 20 mm nominal size Recycled Concrete
Aggregate (RCA) upto 25%))

4.7 Providing and fixing up to floor five level precast cement concrete solid block,
including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand),
cost of required centering, shuttering complete :

0004 Production cost of concrete by batch mix plant

4.7.1A 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including

manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
25% : 3 graded stone aggregate 20 mm nominal size (Recycled Concrete
Aggregate (RCA) upto 25%)).

4.8 Providing and fixing up to floor five level precast cement concrete hollow block,
including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand),
cost of required centering, shuttering complete.

4.8.1 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural

sources : 3 graded stone aggregate 20 mm nominal size derived from natural
sources) .

4.8.1A 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) ncluding

manufactured sand derived from Recycled Concrete Aggregate Recycled
Concrete Aggregate (RCA) upto 25% : 3 graded stone aggregate 20 mm nominal
size (Recycled Concrete Aggregate (RCA) upto 25%)).

4.9 Precasting and placing in position 125 mm dia Bollards 600 mm high of required
shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S.
Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and
embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived
from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural
sources), including necessary excavation of size 250x250x450mm deep for the same in
bitumen/concrete pavement at specified spacing.
cum 8130.65

cum 7902.85

cum 15762.45

cum 15534.65

cum 12605.35

cum 12500.20

each 785.70
4.9 A Precasting and placing in position 125 mm dia Bollards 600 mm high of
required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in
the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm
M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1
Cement : 3 manufactured sand derived from Recycled Concrete Aggregate
Recycled Concrete Aggregate (RCA)
: 6 graded stone aggregate 20 mm nominal size (Recycled Concrete Aggregate
(RCA)), including necessary excavation of size
250x250x450mm deep for the same in bitumen/ concrete pavement at
specified spacing
4.9 B Precasting and placing in position 125 mm dia Bollards 600 mm high of required
shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the
Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S.
plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1
Cement : 3 manufactured sand derived from Recycled Concrete Aggregate
Recycled Concrete Aggregate (RCA)
0004
: 6 graded stone aggregate 20 mm nominal size (Recycled Aggregate (RA),
Production
including necessary excavation of size 250x250x450mm deep
cost of
concrete by for the same in bitumen/ concrete pavement at specified spacing
batch mix
plant DAMP-PROOF COURSE
4.10 Providing and laying damp-proof course 40mm thick with cement concrete
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4
graded stone aggregate 12.5mm nominal size derived from
natural sources)
4.10A Providing and laying damp-proof course 40mm thick with cement concrete
1:2:4 (1 cement : 2 coarse sand (zone-III) including manufactured sand
derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone
aggregate 12.5mm nominal size (Recycled
Concrete Aggregate (RCA) upto 25%))
4.11 Providing and laying damp-proof course 50mm thick with cement concrete
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4
graded stone aggregate 20mm nominal size derived from
natural sources).
4.11A Providing and laying damp-proof course 50mm thick with cement concrete
1:2:4 (1 cement : 2 coarse sand (zone-III) ncluding manufactured sand
derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone
aggregate 20mm nominal size (Recycled
Concrete Aggregate (RCA) upto 25%))
4.12 Extra for providing and mixing water proofing material in cement concrete
work in doses by weight of cement as per manufacturer's specification.
4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of
approved quality using 1.7kg per square metre on damp proof course after
cleaning the surface with brushes and finally with apiece
of cloth lightly soaked in kerosene oil.
MISCELLANEOUS
4.14 Extra for concrete work in superstructure above floor V level for each
four floors or part thereof.
each 753.80

each 733.00

sqm 370.85

sqm 362.35

sqm 452.25

sqm 440.25
per 50kg 57.15
cement

sqm 113.85

cum 1294.45
4.15 Extra for laying concrete in or under water and/or liquid mud including
cost of pumping or bailing out water and removing slush etc. complete.
Note for item No. 4.15 :- The quantity will be calculated by multiplying the depth
measured from the sub-soil water level up to centre of gravity of concrete under
sub-soil water level with quantity of concrete in cum executed under sub-soil
water. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or
more shall be taken as 0.1m and less than 0.05m ignored.

4.16 Extra for laying concrete in or under foul positions.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement
0004 Production cost of concrete by batch mix plant

: 3 coarse sand (zone-III) derived from natural sources : 6 graded stone

aggregate 20 mm nominal size derived from natural sources) over 75mm thick
bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and
grouted with fine sand, including necessary excavation,
levelling & dressing & finishing the top smooth.
4.17A Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement
: 3 manufactured sand derived from Recycled Concrete Aggregate (RCA)
: 6 graded stone aggregate 20 mm nominal size (Recycled Concrete Aggregate
(RCA) over 75mm thick bed of dry brick ballast 40 mm nominal size, well
rammed and consolidated and grouted with fine sand, including necessary
excavation, levelling & dressing & finishing the top smooth

4.17B Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement
: 3 manufactured sand derived from Recycled Concrete Aggregate (RCA)
: 6 graded stone aggregate 20 mm nominal size (Recycled Aggregate (RA) over
75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and
consolidated and grouted with fine sand, including
necessary excavation, levelling & dressing & finishing the top smooth
4.18 Extra for addition of synthetic Polyester triangular fibre of length 12mm,
effective diameter 10-40 microns and specific gravity of 1.34 to 1.40
in cement concrete/RCC/Flooring/water retaining structures by using
125gms of synthetic Polyester triangular fibre for 50 Kg cement used
as per directions of Engineer-in-Charge.
4.19 DELETED
4.19.1 DELETED
4.19.1.1 DELETED
4.19.1.2 DELETED
4.19.2 DELETED
4.19.2.1 DELETED
4.19.2.2 DELETED
4.20 Providing and laying in position ready mixed or site batched design
mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natu
sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as
9103 to accelerate / retard setting
 cum per 905.50
metre depth

cum 385.25

sqm 681.65

sqm 631.25

sqm 596.60
per bag 61.90
of 50kg
of
cement

d fine aggregate derived from natural

res in recommended proportions as per IS:
 of concrete, to improve durability and workability without impairing
strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the
centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of co
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable
separately. In case the cement content in design mix is more than 110% of the minimum specified cemen
content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
4.20.1 All works upto plinth level :

4.20.1.1 Concrete of M10 grade with minimum cement

content of 220 kg /cum
4.20.1.2 Concrete of M15 grade with minimum cement content of 240
kg /cum

4.20.1.3 Concrete of M20 grade with minimum cement content of 270

kg /cum

0004 Production cost of concrete by batch mix plant

All works above plinth and upto floor V level

4.20.2.1 Concrete of M10 grade with minimum cement content of 220
kg /cum

4.20.2.2 Concrete of M15 grade with minimum cement content of 240

kg /cum

4.20.2.3 Concrete of M20 grade with minimum cement content of 270

kg /cum

4.20.2.4 Concrete of M25 grade with minimum cement content of 300

kg /cum

4.20.2
4.20A Providing and laying in position ready mixed or site batched design
mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from nat
sources and using recycled concrete aggregate (RCA) as coarse aggregate and fine aggregate within the permiss
utilization, Portland Pozzolana / Ordinary Portland/Portland Slag cement, admixtures in recommended proportions
IS: 9103 to accelerate / retard setting of concrete to improve durability and workability without impairing strength
including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shu
and finishing as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.
the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall
discretion to either re-design the
mix or bear the cost of extra cement.
iage for all leads; but excluding the cost of
harge; for the following grades of concrete.
nt in design mix shall be payable
% of the minimum specified cement
or bear the cost of extra cement.

cum 8033.20

cum 8174.75

cum 8387.15

cum 8599.50

cum 9655.60

cum 9797.15

cum 10009.50

cum 10221.85

nd fine aggregate derived from natural

d fine aggregate within the permissible
tures in recommended proportions as per
orkability without impairing strength;
excluding the cost of centering, shuttering
of concrete.
n mix shall be payable separately. In case
ement content, the contractor shall have
 4.20A.1 All works upto plinth level
4.20A.1.1 Concrete of M10 grade with minimum cement
content of 220 kg /cum.
(Note: The permissible utilization of Recycled Concrete
Aggregate (RCA) as coarse aggregate and fine aggregate
is 100% each).

4.20A.1.2 Concrete of M15 grade with minimum cement content of

240 kg /cum.

0004 Production (Note: The permissible utilization of Recycled Concrete

cost of concrete by batch Aggregate (RCA) as coarse aggregate and fine aggregate
mix plant is 25% each).

4.20A.1.3 Concrete of M20 grade with minimum cement content of

270 kg /cum.
(Note: The permissible utilization of Recycled Concrete
Aggregate (RCA) as coarse aggregate and fine aggregate
is 25% each).

4.20A.1.4 Concrete of M25 grade with minimum cement content of

300 kg /cum.

(Note: The permissible utilization of Recycled Concrete

Aggregate (RCA) as coarse aggregate and fine aggregate
is 25% each).
4.20A.2 All works above plinth and upto floor V level
4.20A.2.1 Concrete of M10 grade with minimum cement content of
220 kg /cum.

(Note: The permissible utilization of Recycled Concrete

Aggregate (RCA) as coarse aggregate and fine aggregate
is 100% each).

4.20A.2.2 Concrete of M15 grade with minimum cement content of

240 kg /cum.

(Note: The permissible utilization of Recycled Concrete

Aggregate (RCA) as coarse aggregate and fine aggregate
is 25% each).

4.20A.2.3 Concrete of M20 grade with minimum cement content of

270 kg /cum.

(Note: The permissible utilization of Recycled Concrete

Aggregate (RCA) as coarse aggregate and fine aggregate
is 25% each).

4.20A.2.4 Concrete of M25 grade with minimum cement content of

300 kg /cum.

(Note: The permissible utilization of Recycled Concrete

Aggregate (RCA) as coarse aggregate
and fine aggregate is 25% each).
 SUB HEAD : 5.0
REINFORCED CEMENT CONCRETE

115
cum 7102.95

cum 7998.95

cum 8211.30

cum 8423.65

cum 8725.35

cum 9621.30

cum 9833.70

cum 10046.05
ONCRETE
 BASIC RATES (SH: 5.0 REINFORCED CEMENT CONCRETE)
Code Description
No.
0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

0004 Production cost of concrete by batch mix plant

0009 Pumping charges of concrete including Hire charges of pump, piping work &
accessories etc.

0011 Hire charges of Pump set of capacity 4000 litres/hour

0012 Vibrator (Needle type 40 mm)
0025 Hire and running charges of light crane
0026 Hire and running charges of bentonite pump
0029 Carriage of ready mixed concrete by rotatory transit mixer
0052 Front end loader 1 cum bucket capacity (incl POL)
0066 Batching and Mixing Plant @ 75 cum per hour
0070 Generator 100 KVA/125 KVA
0082 Excavation of Diaphragm wall by Mechanical Grab
0101 Bhisti
0102 Blacksmith 1st class
0103 Blacksmith 2nd class
0112 Carpenter 2nd class
0114 Beldar
0115 Coolie
0116 Fitter (grade 1)
0123 Mason (brick layer) 1st class
0124 Mason (brick layer) 2nd class
0126 Mason (for ornamental stone work) 1st class
0128 Mate
0131 Painter
0155* Mason (average)
0236 Multi purpose fibre reinforced by organic fibres and/or inorganic synthetic fibres
cement board 6 mm thick

0242 6 mm thick mulitipurpose cement bonded wood particle board conforming to IS :

14276

0278 Manufactured sand derived from Recycled Concrete Aggregate (RCA)

0279 Recycled Concrete Aggregate (RCA) 20 mm nominal size

0281 Recycled Concrete Aggregate (RCA) 10 mm nominal size
 117
SUB HEAD -5.0 REINFORCED CEMENT CONCRETE
NT CONCRETE)
Unit Rate

day 800.00

cum 400.00

cum 210.00

day 700.00
day 350.00
day 3500.00
day 3000.00
km/cum 37.30
hour 1300.00
hour 2400.00
hour 300.00
sqm 1500.00
day 714.00
day 784.00
day 714.00
day 714.00
day 645.00
day 645.00
day 784.00
day 784.00
day 714.00
day 784.00
day 714.00
day 714.00
day 749.00

sqm 210.00

sqm 195.00

cum 741.00

cum 957.00
cum 957.00
0293 Stone Aggregate (Single size) : 40 mm nominal size

0295 Stone Aggregate (Single size) : 20 mm nominal size

0297 Stone Aggregate (Single size) : 10 mm nominal size
0302 Safeda ballies 125 mm diameter
Paving bitumen of grade VG-10 of approved quality
0004 Production cost of concrete by batch mix plant

0313 Blown type petroleum bitumen of penetration 85/25 of approved quality

0314 Bitumen hot sealing compound : grade A

0316 Bitumen solution primer of approved quality
0339 Flame retardant face insulating, Impregnated fibre board 12 mm thick
0349 Curing compound
0367 Portland Cement (OPC-43 Grade)
0370 Coal (steam)
0596 Bright finished or black enameled mild steel butt hinges 75x47x
1.70 mm

0639 Bright finished or black enameled mild steel screws 25 mm

0768 Cement Concrete Jali 50 mm thick
0769 Cement Concrete Jali 40 mm thick
0770 Cement Concrete Jali 25 mm thick
0967 Copper plate
0982 Coarse sand (zone III)
0983 Fine sand (zone IV)
0992 Galvanised steel plain sheets
1004 Average rate of Mild steel round bars for reinforcement
1005 Twisted steel/ deformed TMT bars Fe-500D
1015 Mild steel expanded metal 20x60 mm strands 3.25 mm wide
1.60 mm thick
1021 Hard drawn steel wire fabric 75 x 25 mm mesh of weight not less
than 7.75 kg/sqm
1034 Bolts and nuts up to 300 mm in length
1197 Second class kail wood in scantling
1198 Second class kail wood in planks
1215 Welding by electric plant
1224 Hard drawn steel wire
1225 Mild steel flat strap fitting
1980 Fly ash

2200 Carriage of Steam coal

2202 Carriage of Stone aggregate below 40 mm nominal size
2203 Carriage of Coarse sand
2204 Carriage of Timber
2205 Carriage of Steel
2206 Carriage of Stone aggregate 40 mm nominal size and above
2209 Carriage of Cement
2211 Carriage of Tar / Bitumen
2261 Carriage of Fine sand (1 part of badarpur sand: 2 parts jamuna sand)
2262 Carriage of Flyash
2273 Carriage of A.C.sheet and accessories
2302 Carriage of G.I. sheet and accessories
2391 Strips-Aluminium fluted 3.15 mm thick and 150 mm wide
2392 Strips Aluminium fluted 3.15 mm thick and 200 mm wide
2393 1 mm thick Stainless Steel Cover plate grade 304
2394 Coupler 16 mm dia
2395 Coupler 20 mm dia
2396 Coupler 25 mm dia
2397 Coupler 28 mm dia
2398 Coupler 32 mm dia
2399 Complete Roof Joint of 100 mm
2400 Complete Roof Joint of 150 mm
2401 Complete Roof Joint of 200 mm
2402 Epoxy adhesive
2403 Floor Joint of 100 mm
2404 Floor Joint of 150 mm
2405 Floor Joint of 200 mm
2409 Wall Joint of 100 mm
2410 Wall Joint of 150 mm
2411 Wall Joint of 200 mm
2447 Hollock ballies 125 mm diameter
7183 Bentonite of 35 kg per pile
7318 Plasticizer / super plasticizer

7319 Wall form panel 1250x500 mm

7320 Tie bolt 12 mm dia 100 mm length
7321 Tie bolt 12 mm dia 150 mm length
7322 Tie bolt 20 mm dia 150 mm length
7323 Tie bolt 20 mm dia 225 mm length
7324 Spring coil 12 mm
7325 Plastic cone 12 mm dia
7326 Corner angle 45x45x5 mm 1.50 m long
7327 100 mm channel shoulder 2.5 m long
7328 Double clip (bridge clip)
7329 Single clip
7330 M.S. tube 40 mm dia
7331 Wall form panel 1250x450 mm
7332 Corner angle 45x45x5 mm 2.50 m long
7333 Column clamp 450x1070 mm
7334 Prop 2 m ( 2-3.5 m)
7345 Prop 4 m
7346 Double coupler
8647 Stainless steel screws 30 mm x4 mm
8659 Water proof ply 12 mm thick
8953 Micro Silica
8954 Stop end tubes for diaphragmwall 600 mm dia.
8955 Driving end tubes for diaphragm wall 600 mm dia.
9977 Carriage
9988 Carriage and sundries
9999 Sundries
 cum 1300.00

cum 1400.00
cum 1350.00
metre 40.00
tonne 25614.00

tonne 34790.00

kg 29.00
litre 47.00
sqm 375.00
litre 38.00
tonne 5000.00
quintal 440.00

10 Nos 56.00

100 Nos 40.00

sqm 400.00
sqm 350.00
sqm 275.00
kg 527.00
cum 1500.00
cum 900.00
quintal 5000.00
quintal 4850.00
quintal 4900.00

sqm 280.00

sqm 430.00
quintal 5200.00
10 cudm 260.00
10 cudm 260.00
cm 2.00
quintal 4800.00
quintal 4120.00
cum 11.00

tonne 187.35
 cum 163.93
cum 163.93
cum 187.35
tonne 145.72
cum 178.19
tonne 145.72
tonne 163.93
cum 163.93
cum 163.93
tonne 145.72
tonne 145.72
metre 286.00
metre 381.00
kg 286.00
each 31.00
each 41.00
each 72.00
each 83.00
each 114.00
metre 2912.00
metre 3328.00
metre 4160.00
kg 156.00
metre 3193.00
metre 4120.00
metre 5562.00
metre 2472.00
metre 2884.00
metre 3468.00
metre 36.00
tonne 2800.00
kg 29.00

each 860.00
each 38.00
each 48.00
each 57.00
 each 67.00
each 15.00
each 15.00
each 240.00
each 910.00
each 76.00
each 59.00
metre 215.00
each 860.00
each 255.00
each 965.00
each 635.00
each 910.00
each 46.00
100 Nos 35.84
sqm 525.00
kg 28.00
sqm 4.50
sqm 72.00
L.S. 2.12
L.S. 2.12
L.S. 2.12
 5.0 REINFORCED CEMENT CONCRETE
Code Description
No.

CAST IN SITU
Providing and laying in position specified grade of reinforced cement concrete,
0004 Production cost of concrete by batch mix plant

excluding the cost of centering, shuttering, finishing and reinforcement - All

work up to plinth level :

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size de rived from natural
sources)

5.1.2A 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) incuding manu- factured

sand derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded
stone aggregate 20 mm nominal size of Recycled Concrete Aggregate (RCA)
upto 20%.

5.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources :
4 graded stone aggregate 20 mm nominal size de rived from natural sources)

5.1.3A 1:2:4 (1 cement : 2 coarse sand incuding manufactured sand derived

from Recycled Concrete Aggregate (RCA) upto 20% : 4 graded stone aggregate
20 mm nominal size of Recycled Con crete Aggregate (RCA) upto 20%).

5.2 Reinforced cement concrete work in walls (any thickness), including attached
pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,
abutments, posts and struts etc. above plinth level up to floor five level,
excluding cost of centering, shuttering, finishing and reinforcement :

5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu-

ral sources : 3 graded stone aggregate 20 mm nominal size derived from natural
sources)

5.2.2A 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand

derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone
aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 20%

5.3 Reinforced cement concrete work in beams, suspended floors, roofs having
slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain
window sills, staircases and spiral stair cases above plinth level up to floor five
level, excluding the cost of centering, shuttering, finishing and reinforcement
with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size derived from natural
sources).

5.3A Reinforced cement concrete work in beams, suspended floors, roofs having
slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain
window sills, staircases and spiral staircases above plinth level up to floor five
level excluding the cost of centering, shuttering, finishing and reinforcement, with
1:1.5:3 (1 cement : 1.5 coarse sand
Unit Rate

cum 8364.20

cum 8180.85

cum 7945.65

cum 7752.70

cum 10185.05

cum 10001.70

cum 10719.30
 incuding manufactured sand derived from Recycled Concrete Aggregate
(RCA) upto 20%: 3 graded stone aggregate 20 mm nominal size
Recycled Concrete Aggregate (RCA) upto 20%)
5.4 Providing and laying up to floor five level reinforced cement concrete in kerbs,
steps and the like excluding the cost of centering, shuttering, finishing and
reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from
natural sources : 3 graded stone aggregate 20 mm nominal size derived from
natural sources).

5.4A Providing and laying up to floor five level reinforced cement concrete in kerbs,
steps and the like excluding the cost of centering, shuttering, finishing and
reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured
sand derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded
stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto
20%).

0004 Reinforced cement concrete work in arches, archribs, domes, vaults, shells,
folded plate and roofs having slope more than 15° up to floor five level,
Productio excluding the cost of centering, shuttering, finishing and reinforcement with
n cost of 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3
concrete graded stone aggregate 20 mm nominal size derived from natural sources).
by batch
mix plant
5.5A Reinforced cement concrete work in arches, archribs, domes, vaults, shells,
folded plate and roofs having slope more than 15° up to floor five level
excluding the cost of centering, shuttering, finishing and reinforcement with
1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived
from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone
aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 20%).

5.6 Reinforced cement concrete work in chimneys, shafts, up to floor five level,
excluding the cost of centering, shuttering, finishing and reinforcement with
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3
graded stone aggregate 20 mm nominal size derived from natural sources).

5.6A Reinforced cement concrete work in chimneys, shafts, up to floor five level
excluding the cost of centering, shuttering, finishing and reinforcement with
1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived
from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone aggregate
20 mm nominal size (Recycled Concrete Aggregate (RCA) upto 20%).

5.7 Reinforced cement concrete work in well-steining, excluding the cost of

centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement
: 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone
aggregate 20 mm nominal size derived from natural sources).

5.7A Reinforced cement concrete work in well-steining excluding the cost of

centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement
: 1.5 coarse sand incuding manufactured sand derived from Recycled Concrete
Aggregate (RCA) upto 20% : 3 graded stone aggregate 20
mm nominal size Recycled Concrete Aggregate (RCA) upto 20%).
cum 10536.00

cum 9801.75

cum 9618.45

cum 11291.20

cum 11107.85

cum 10409.40

cum 10226.05

cum 7852.70

cum 7669.40
5.8 Reinforced cement concrete work in vertical and horizontal fins individually
or forming box louvers, facias and eaves boards above plinth level up to floor
five level, excluding the cost of centering, shuttering, finishing and reinforcement
with 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources :
3 graded stone aggregate 20mm nominal size derived from natural sources).

5.8A Reinforced cement concrete work in vertical and horizontal fins individually or
forming box louvers, facias and eaves boards above plinth level up to floor five
level excluding the cost of centering, shuttering, finishing and reinforcement,
with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand
derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone
aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 20%).

FORM WORK
5.9 Centering and shuttering including strutting, propping etc. and removal of form
for
0004 Production cost of concrete by batch mix plant

5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and
string courses etc.

5.9.3 Suspended floors, roofs, landings, balconies and access platform

5.9.4 Shelves (Cast in situ)

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.7 Stairs, (excluding landings) except spiral-staircases
5.9.8 Spiral staircases (including landing)
5.9.9 Arches, domes, vaults up to 6 m span
5.9.10 Extra for arches, domes, vaults exceeding 6 m span
5.9.11 Chimneys and shafts
5.9.12 Well steining
5.9.13 Vertical and horizontal fins individually or forming box louvers band,
facias and eaves boards

5.9.14 Extra for shuttering in circular work (20% of respective centering and
shuttering items)

5.9.15 Small lintels not exceeding 1.5 m clear span, moulding as in cornices,
window sills, string courses, bands, copings, bed plates, anchor blocks and the
like

5.9.16 Edges of slabs and breaks in floors and walls

5.9.16.1 Under 20 cm wide
5.9.16.2 Above 20 cm wide
 cum 9297.70

cum 9114.35

sqm 307.95

sqm 669.55

sqm 766.55

sqm 766.55

sqm 608.35

sqm 804.25
sqm 657.75
sqm 652.80
sqm 1826.25
sqm 575.25
sqm 669.55
sqm 246.40

sqm 1100.40

sqm 20%

sqm 307.95

metre 181.90
sqm 772.10
 5.9.17 Cornices and mouldings
5.9.18 Small surfaces such as cantilever ends, brackets and ends of steps,
caps and bases to pilasters and columns and the
like
5.9.19 Weather shade, Chajjas, corbels etc., including edges
5.9.20 Suspended floors, roofs, landings, balconies and access platform with
water proof ply 12 mm thick

0004 Production cost of concrete by batch mix plant

5.10 Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering
complete as per the direction of Engineer-in-charge.
5.10.1 12 mm dia. & 100 mm length
5.10.2 12 mm dia. & 150 mm length
5.10.3 20 mm dia. & 150 mm length
5.10.4 20 mm dia.& 225 mm length
5.11 Extra for additional height in centering, shuttering where ever required with
adequate bracing, propping etc., including cost of de-shuttering and decentering
at all levels, over a height of 3.5 m, for every additional height of 1 metre or part
thereof (Plan area to be measured).

5.11.1 Suspended floors, roofs, landing, beams and balconies (Plan area to
be measured)

PRE-CAST RCC
5.12 Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete work in string courses, bands, copings, bed plates,
anchor blocks, plain window sills and the like, including the cost of required
centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1
cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded
stone aggregate 20 mm nominal size derived from natural sources).

5.12A Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete work in string courses, bands, copings, bed plates,
anchor blocks, plain window sills and the like, including the cost of required
centering, shuttering but excluding cost of reinforcement, with 1:1.5:3 (1
cement : 1.5 coarse sand incuding manufactured sand derived from Recycled
Concrete Aggregate (RCA) upto 20% : 3 graded stone aggregate 20 mm
nominal size Recycled Concrete Aggregate (RCA) upto 20%).

5.13 Providing, hoisting and fixing up to floor five level precast reinforced cement
concrete in small lintels not exceeding 1.5m clear span up to floor five level,
including the cost of required centering, shuttering but , excluding the cost of
reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from
natural sources : 3 graded stone aggregate 20
mm nominal size derived from natural sources).
 sqm 769.30

sqm 827.15
sqm 814.95

sqm 853.75

sqm 699.45

ering

each set 135.75

each set 149.10
each set 161.15
each set 174.55

sqm 319.25

cum 9673.50

cum 9491.20

cum 13581.85
5.13A Providing, hoisting and fixing up to floor five level precast reinforced cement
concrete in small lintels not exceeding 1.5 m clear span up to floor five level,
including the cost of required centering, shuttering but excluding the cost of
reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured
sand derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded
stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto
20%).
cum
5.14 Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in mouldings as in cornices, windows sills etc,
including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of
required centering, shuttering but, excluding the cost of reinforcement, with
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3
graded stone aggregate 20 mm nominal size derived from natural sources).

cum
5.14A Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in mouldings as in cornices, windows sills etc.
including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of
required centering, shuttering but excluding the cost of reinforcement, with
1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived
from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone aggregate
20 mm nominal size Recycled Concrete Aggregate (RCA) upto 20%).

cum
5.15 Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in lintels, beams and bressumers, including setting
in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and
shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5
coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate
20 mm nominal size derived from natural sources)

cum
0004 Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in lintels, beams and bressumers including setting in
Productio cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and
n cost of shuttering but excluding the cost of reinforcement with, 1:1.5:3 (1 cement : 1.5
concrete coarse sand incuding manufactured sand derived from Recycled Concrete
by batch Aggregate (RCA) upto 20% : 3 graded stone aggregate 20 mm nominal size
mix plant Recycled Concrete Aggregate (RCA) upto 20%).

cum
5.16 Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in shelves, including setting in cement mortar 1:3
(1cement : 3 coarse sand), cost of required centering, shuttering and finishing
with neat cement punning on exposed surfaces but , excluding the cost of
reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from
natural sources : 3 graded stone aggregate
20 mm nominal size derived from natural sources).

cum
5.16A Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in shelves including setting in cement mortar 1:3 (1
cement : 3 coarse sand), cost of required centering, shuttering and finishing with
neat cement punning on exposed surfaces but excluding the cost of
reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured
sand derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded
stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto
20%).

cum
5.17 Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in vertical & horizontal fins, individually or forming
box louvers, setting in cement mortar 1:2 (1 cement : 2 coarse sand), including
the cost of required centering, shuttering but , excluding the cost of
reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-
III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size
derived from natural sources).
cum
5.17A Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in vertical & horizontal fins individually or forming
box louvers setting in cement mortar 1:2 (1 cement : 2 coarse sand), including
the cost of required centering, shuttering but excluding the cost of reinforcement,
with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived
from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone aggregate
20 mm nominal size Recycled Concrete Aggregate (RCA) upto 20%).

cum
5.18 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III)
: 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild
steel wire, including centering and shuttering, roughening cleaning, fixing and
finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding
plastering of the jambs, sills and soffits.

5.18.1 50 mm thick sqm

5.18.2 40 mm thick sqm
5.18.3 25 mm thick sqm
ENCASING ROLLED STEEL SECTION
5.19 Encasing rolled steel sections, in beams and columns, with cement concrete
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3
graded stone aggregate 20 mm nominal size derived from natural sources)
including centering and shuttering complete but , excluding cost of
reinforcement.
cum
5.19A Encasing rolled steel sections, in beams and columns, with cement concrete
1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived from
Recycled Concrete Aggregate (RCA) upto 20%: 3 graded stone aggregate 20
mm nominal size Recycled Concrete Aggregate (RCA) upto 20%) including
centering and shuttering complete
but excluding cost of reinforcement.
cum
5.20 Encasing rolled steel section in grillages with cement concrete 1:1.5:3
(1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded
stone aggregate 20 mm nominal size derived from natural sources) including
centering and shuttering but, excluding cost of expanded metal and hangers.

5.20A Encasing rolled steel section in grillages with cement concrete 1:1.5:3 (1 cement :
1.5 coarse sand incuding manufactured sand derived from Recycled Concrete
Aggregate (RCA) upto 20% : 3 graded stone aggregate 20 mm nominal size
Recycled Concrete Aggregate (RCA) upto 20%), including centering and
shuttering but excluding cost of expanded metal and hangers.

5.21 Extra for providing and fixing expanded metal mesh of size 20x60 mm and
strands 3.25 mm wide 1.6 mm thick weighing 3.64 kg per sqm for encasing of
rolled steel sections in beams, columns and grillages, excluding cost of hangers.

STEEL REINFORCEMENT
5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete upto plinth level.
5.22.1 Mild steel and Medium Tensile steel bars
5.22.2 Hard drawn steel wire
5.22.3 Cold twisted bars
5.22.4 Hot rolled deformed bars
5.22.5 Hard drawn steel wire fabric
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.
5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete above plinth level.
5.22A.1 Mild steel and Medium Tensile steel bars
5.22A.2 Hard drawn steel wire
5.22A.3 Cold twisted bars
5.22A.4 Hot rolled deformed bars
5.22A.5 Hard drawn steel wire fabric
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.
5.22B Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of
approved make from factory/workshop to construction site including placing in
position and binding all complete upto plinth level.

5.22B.1 Thermo-Mechanically Treated bars of grade Fe-500D or more.

5.22C Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of
approved make from factory/workshop to construction site including placing in
position and binding all complete above plinth level.

5.22C.1 Thermo-Mechanically Treated bars of grade Fe-500D or more.

cum 13398.50

cum 15777.40

cum 15594.10

cum 12321.25

cum 12137.95
cum 18644.60

cum 18461.30

cum 10817.10

cum 10633.80

sqm 1580.90
sqm 1430.30
sqm 1291.45

cum 14191.95
cum 14008.65

cum 8874.65

cum 8691.35

sqm 448.80

kg 88.95
kg 87.50
kg 89.65
kg 89.65
kg 94.10
kg 89.65

kg 88.95
kg 87.50
kg 89.65
kg 89.65
kg 94.10
kg 89.65

kg 83.15
kg 83.15
 MISCELLANEOUS
5.23 Smooth finishing of the exposed surface of R.C.C. work with 6 mm
thick cement mortar 1:3 (1 Cement : 3 fine sand). sqm
5.24 Extra for rendering smooth the top of suspended floors, landings and
0004 Production cost of concrete by batch mix plant
coarse sand), including a floating coat of neat cement and protecting
the surface with a layer of 7.5 cm of earth laid over 15 mm of fine sand
in case of suspended floor and bricks laid in mud mortar in case of
landings and steps, including subsequent removal and cleaning of the
same. sqm
5.25 Providing and fixing in position copper plate as per design for expansion
joints. kg
5.26 Providing and filling in position, blown bitumen in expansion joints. cum
5.27 Providing and filling in position bitumen mix filler of proportion 80 kg. of
hot bitumen, 1 kg. of cement and 0.25 cubic metre of coarse sand for
expansion joints. cum
5.28 Providing and fixing in position 12mm thick bitumen impregnated per cm
fiber board conforming to IS: 1838, including cost of primer, sealing depth per
compound Grade-A in expansion joints. 100m
5.29 Providing and fixing sheet covering over expansion joints with iron screws as per design.

5.29.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862.

5.29.1.1 150mm wide metre
5.29.1.2 200mm wide metre
5.29.2 Aluminium fluted strips 3.15 mm thick.
5.29.2.1 150 mm wide metre
5.29.2.2 200 mm wide metre
5.29.3 Cement bonded wood particle board 6mm thick as per
IS : 14276
5.29.3.1 150 mm wide metre
5.29.3.2 200 mm wide metre
5.30 Add for plaster drip course/ groove in plastered surface or moulding to
R.C.C. projections. metre
5.31 Extra for laying reinforced cement concrete in or under water and/ or
liquid mud, including cost of pumping or bailing out water and removing
slush etc., complete. cum
Note For Item No. 5.31:- The quantity will be calculated by multiplying
the depth measured from the subsoil water level up to the centre of
gravity of the R.C.C. under subsoil water with the quantity of R.C.C. in
cubic metre executed under subsoil water. The depth of centre of gravity
shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as
 253.05

133.90

729.40
63877.35

22400.50
567.25

203.65
273.95

515.80
685.10

200.50
269.75

64.70

905.50
0.1 m and less than 0.05 m ignored. No extra payment shall be made
for placing reinforcement or centering & shuttering under sub - soil water conditions.
5.32 Extra for laying reinforced cement concrete in or under foul positions.

DESIGN MIX CONCRETE

5.33 Providing and laying in position ready mixed or site batched design mix cement
concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate
derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag
cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard
setting of concrete, to improve durability and workability without impairing strength;
including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the
cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-
charge; for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content in

design mix shall be payable separately. In case the cement content in design
mix is more than 110% of the specified minimum cement content, the contractor
shall have discretion to either re-design the mix or bear the cost of extra cement.

0004 Production cost of concrete by batch mix plant

5.33.1.1 Concrete of M25 grade with minimum cement content of 330
kg /cum

5.33.1.2 Concrete of M30 grade with minimum cement content of 350

kg /cum

5.33.1.3 Concrete of M35 grade with minimum cement content of 370

kg /cum

5.33.1.4 Concrete of M40 grade with minimum cement content of 390

kg/cum

5.33.1.5 Concrete of M50 grade with minimum cement content of 410

kg/cum

5.33.2 All works above plinth level upto floor V level

5.33.2.1 Concrete of M25 grade with minimum cement content of 330
kg /cum

5.33.2.2 Concrete of M30 grade with minimum cement content of 350

kg /cum

5.33.2.3 Concrete of M35 grade with minimum cement content of 370

kg /cum

5.33.2.4 Concrete of M40 grade with minimum cement content of 390

kg /cum

5.33.2.5 Concrete of M50 grade with minimum cement content of 410

kg /cum
cum 385.25

cum 7997.30

cum 8599.35

cum 8740.90

cum 8882.45

cum 9024.05

cum 10080.15

cum 10221.70

cum 10363.30

cum 10504.85

cum 10646.45
 5.33A Providing and laying in position ready mixed or site batched design mix
cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from nat
sources and using recycled concrete aggregate (RCA) as coarse aggregate and fine aggregate within permiss
utilization of 20% each, Portland Pozzolana
/Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / re
setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to
laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as p
direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.
case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor
have discretion to either re-design the mix or bear the cost of extra cement.
5.33A.1 All works upto plinth level
5.33A.1.1 Concrete of M25 grade with minimum cement
content of 330 kg /cum cum 8320.05
5.33A.2 All works above plinth level up to floor V level
5.33A.2.1 Concrete of M25 grade with minimum cement
content of 330 kg /cum cum 9263.15

5.34 DELETED
5.34.1 DELETED
5.34.2 DELETED
0004 DELETED
5.35 Production
Add for using extra cement in the items of design mix over and above the
cost of
specified cement content therein.
concrete
5.36 byProviding
batch and placing in position precast reinforced cement concrete waffle
mix plantsquare or rectangular, as per design and shape for floors and roofs in
units,
1:1½:3 (1 Cement : 1½ coarse sand (zone-III) derived from natural sources : 3
graded stone aggregate 10 mm nominal size derived from natural sources),
including flush or deep ruled pointing at joints in Cement mortar 1:2 (1 Cement :
2 Fine sand), making necessary holes of required sizes for carrying through
service lines etc., providing steel hooks for lifting etc, form work in
precasting, handling, hoisting, centering and erection complete for all floor
levels but, excluding the cost of reinforcement.

5.36A Providing and placing in position precast reinforced cement concrete waffle
units, square or rectangular as per design and shape for floors and roofs in
1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived from
Recycled Concrete Aggregate (RCA) upto 20% : 3
graded stone aggregate 10 mm nominal size Recycled Concrete
 ix
and fine aggregate derived from natural
and fine aggregate within permissible

ns as per IS: 9103 to accelerate / retard

th; including pumping of concrete to site of
ng, finishing and reinforcement as per

gn mix shall be payable separately. In

mum cement content, the contractor shall

quintal 688.45

cum 27763.65
 Aggregate (RCA) upto 20%), including flush or deep ruled pointing at
joints in cement mortar 1:2 (1 cement : 2 Fine sand), making necessary holes of required sizes for carrying through
lines etc., providing steel hooks for lifting etc, form work in precasting, handling, hoisting, centering and erection com
for all floor levels but excluding the
cost of reinforcement. cum 27580.30
5.37 DELETED
5.37.1 DELETED
5.37.2 DELETED
5.38 Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four
floors or part thereof. cum 280.95
5.40 DELETED

5.40.1 DELETED
5.40.2 DELETED
5.41 Supplying and applying pre tested and approved water based concrete curing
compound to concrete/ masonry surface, all as per manufacturer’s specification and direction
of Engineer-in-charge.

0004 Production cost of concrete by batch mix plant

5.42 Providing and fixing parallel threaded couplers conforming to IS code on
“Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement -
Specification”, to reinforcement bars including threading, enlargement at connection by
forging, protecting the prepared reinforcement bars and related operations as required to
complete the works per direction of Engineer- in-Charge.

5.42.1 Coupler for 16 mm diameter reinforcement bar

5.42.2 Coupler for 20 mm diameter reinforcement bar
5.42.3 Coupler for 25 mm diameter reinforcement bar
5.42.4 Coupler for 28 mm diameter reinforcement bar
5.42.5 Coupler for 32 mm diameter reinforcement bar
5.43 Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as
per design for expansion joints.
5.43.1 200 mm wide.
5.43.2 300 mm wide.
5.44 Providing and fixing of expansion joint system related with floor location as per
drawings and direction of Engineer-In-Charge. The joints system will be of extruded
aluminum base members, self aligning / self centering arrangement and support plates etc.
as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall
expansion control system for various vertical localtion in load application areas that
accommodates multi directional seismic movement without stress to
it's components. System shall consist of metal profiles with a universal
required sizes for carrying through service
hoisting, centering and erection complete

27580.30

r
280.95

sqm 57.50

each 102.55
each 143.00
each 204.95
each 239.85
each 288.80

metre 747.25
metre 1053.40
 aluminum base member designed to accommodate various project
conditions and finish floor treatments. The cover plate shall be designed of width and thickness required
satisfy projects movement and loading requirements and secured to base members by utilizing manufac
pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - cente
arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum ex
cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provisi
Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as
manufactures design and as approved by Engineer -in-
Charge. (Material shall confirm to ASTM 6063).

5.44.1 Floor Joint of 100 mm gap

5.44.2 Floor Joint of 150 mm gap
5.44.3 Floor Joint of 200 mm gap
0004 Production cost of concrete by batch mix plant

5.45.1 Wall Joint of 100 mm gap

5.45.2 Wall Joint of 150 mm gap
5.45.3 Wall Joint of 200 mm gap
5.46 Providing and fixing of expansion joint system of approved make and
manufactures for various roof locations as per approved drawings and direction of Engineer-
In-Charge. The joints shall be of extruded aluminum base members with, self aligning and
self centering arragement support plates asper ASTM B221-02. The system shall be such
that it provides watertight roof to roof/roof to corner joint cover expansion control system that
is capable of accommodating multidirectional seismic movement without stress to its
components. System shall consist of metal profile that incorporates a universal aluminum
base member designed to accommodate various project conditions and roof treatments.
The cover plate shall be designed of width and thickness required to satisfy movement
and loading requirements and secured to base members by utilizing manufacturer’s pre-
engineered self-centering arrangement that freely rotates / moves in all directions. The Self
centering arrangement shall exhibit circular sphere ends that lock and slide inside the
corresponding aluminum extrusion cavity to allow freedom of movement
ned of width and thickness required to
base members by utilizing manufacturer’s
es in all directions. The Self - centering
ide the corresponding aluminum extrusion
uding vertical displacement. Provision of
nt is mandatory requirement all as per the

metre 5800.15
metre 7092.60
metre 9074.10

metre 4835.50
metre 5438.90
metre 6272.45
 and flexure in all directions including vertical displacement. The Joint
System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne
contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Mem
in the Joint System to have water tight joint is mandatory requirement.
(Material shall confirm to ASTM 6063).

5.46.1 Roof Joint of 100 mm gap

5.46.2 Roof Joint of 150 mm gap
5.46.3 Roof Joint of 200 mm gap
0004 Production cost of concrete by batch mix plant

5.47.1 Door frame 125 mmx 60 mm

5.47.2 Door frame 100 mmx 60 mm
5.47.3 Door frame 85 mmx60 mm
5.48 Providing and laying Reinforced cement concrete for construction of piers,
abutments, portal frames, pier caps and bearing pedestals and seismic arresters over pier/
abutment caps at all locations with specified grade using Ordinary Portland Cement
(conforming to strength requirement of IS:8112) including the cost of steel centering
and shuttering etc. complete, including testing of materials etc. for casting pier & pier cap in
one/two stage, necessary tools, plants, machinery and all related operations as required to
complete the work as per drawings and Specifications with all leads, lifts and depths true to
level and position but excluding the cost of providing reinforcement. Reinforcement shall
be measured and paid separately.

Note:- Cement content considered in this item is 480 Kg./ Cum. Excess/ less
cement used as per design mix is payable/ recoverable separately.
5.48.1 Reinforced Cement Concrete -M-50
5.48.2 Reinforced Cement Concrete -M-60
5.48.3 Extra for using M-50/ M-60 Grade Self-compacting Cement Concrete

5.49 Constructing cast-in situ RCC diaphragm wall by providing and laying machine
batched, machine mixed, self compacting, ready mix reinforced cement concrete, tramie
controlled, of M 30 grade using minimum 400 kg. cement per cum of concrete including
providing and mixing required
admixtures in recommended proportions as per IS : 9103, as approved
by the Engineer-in-charge, for achieving 150- 200mm slump, for diaphragm wall having thickness a
approved structural design not exceeding 600 mm, in pannels of required depth and lengths as per app
drawing, including constructing necessary guide walls as required and as specified including boring in a
of soils and rocks, including working in or under water and / or liquid mud, in foul conditions and pumpin
bailing out of water and removing slush, including disposal of earth/ rock / slush etc. for all leads and all
including preparing, providing and re-circulating bentonite slurry in the trench as and when required for a
depths, including agitating bentonite slurry during trenching etc., providing and fixing stop ends or form t
upto the required depth of diaphragm wall including extracting the same after casting, including chipping
bentonite adulterated concrete or unsound concrete up to the cut off level for obtaining the sound concr
dressing undulations on the exposed face of diaphragm wall after excavation by chipping / chiseling etc
including filling the depression/ cavities with sound concrete etc. complete and as directed by the Engin
charge, including providing recess for bearing plates and fixing insert boxes for inclined rock anchors
complete as per the specifications and approved design and as directed by the Engineer-in-charge, b
excluding
the cost of reinforcement and inserts. cum 17310.65
 SUB HEAD : 6.0
MASONRY WORK
135
g ice, exposure to UV, airborne
l. Provision of Moisture Barrier Membrane
t.

metre 5424.20
metre 6032.95
metre 7198.30

metre 727.15
metre 1383.20
metre 3141.40

cum 7734.60
cum 8807.25

cum 676.50
 ed
r diaphragm wall having thickness as per
uired depth and lengths as per approved
d as specified including boring in all kinds
mud, in foul conditions and pumping or
ock / slush etc. for all leads and all lifts,
e trench as and when required for all
viding and fixing stop ends or form tubes,
me after casting, including chipping off the
level for obtaining the sound concrete,
cavation by chipping / chiseling etc.
mplete and as directed by the Engineer-in-
boxes for inclined rock anchors etc.
rected by the Engineer-in-charge, but

cum 17310.65
K
 BASIC RATES (SH: 6.0 MASONRY WORK)
Code Description
No.
0011 Hire charges of Pump set of capacity 4000 litres/hour

Mobile crane
0004 Production cost of concrete by batch mix plant

0100 Bandhani

0101 Bhisti

0102 Blacksmith 1st class

0114 Beldar

0115 Coolie

0123 Mason (brick layer) 1st class

0124 Mason (brick layer) 2nd class

0155* Mason (average)

0322 Bitumen felt :Type 3 grade 1

0357 Polymer modified adhesive mortar

1002 Mild steel round bar 12 mm dia and below

1008 Flats up to 10 mm in thickness

1034 Bolts and nuts up to 300 mm in length

1197 Second class kail wood in scantling

1225 Mild steel flat strap fitting

1235 Diesel

1984 Common burnt clay F.P.S. bricks tile class designation 10

1986 Common burnt clay modular bricks class designation 12.5

2201 Carriage of Bricks

2204 Carriage of Timber

2205 Carriage of Steel

2207 Carriage of Brick tiles

2208 Carriage of Lime

2302 Carriage of G.I. sheet and accessories

2602 Common burnt clay F.P.S. (non modular) bricks class designation 7.5

7008 F.P.S. (non modular) clay fly ash bricks class designation 7.5

7736 Extruded burnt flyash clay sewer bricks conforming to I.S 4885
No.
7737 Fly ash bricks conforming to I.S. 12894

7738 Calcium Silicate Bricks machine moulded conforming to I.S. 4139

7900 Modular common burnt clay bricks of class designation 7.5

7901 Machine moulded perforated common burnt clay FPS (non modular) bricks of
class designation 12.5

7902 Machine moulded common burnt clay modular perforated bricks of class
designation 12.5

7903 Machine moulded common burnt clay FPS (non modular) bricks of class
designation 12.5

7904 Machine moulded common burnt clay tile bricks of class designation 12.5

8655 Autoclaved aerated cement (AAC) blocks

8656 Gypsum panel 666 X 500 X 100 mm size

8657 Bonding plaster for Gypsum panel

9999 Sundries
WORK)
Unit Rate

day 700.00

day 4500.00

day 714.00

day 714.00

day 784.00

day 645.00

day 645.00

day 784.00

day 714.00

day 749.00

sqm 70.00

kg 14.00

quintal 4850.00

quintal 4850.00

quintal 5200.00

10 cudm 260.00

quintal 4120.00

litre 80.87

1000 Nos 4600.00

1000 Nos 5200.00

1000 Nos 437.15

cum 187.35

tonne 145.72

1000 Nos 262.29

cum 163.93

tonne 145.72

1000 Nos 4590.00

1000 Nos 4500.00

1000 Nos 5000.00

1000 Nos 3950.00

1000 Nos 5050.00

1000 Nos 3800.00

1000 Nos 4200.00

1000 Nos 4800.00

1000 Nos 4700.00

1000 Nos 4600.00

cum 2650.00

sqm 480.00

kg 25.50

L.S. 2.12
 6.0 MASONRY WORK

Code No. Description

0004
Production
6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class
cost of
concrete designation 7.5 in foundation and plinth in:
by batch
mix plant 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand)
6.2 Brick work with common burnt clay modular bricks of class designation
7.5 in foundation and plinth in:
6.2.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
6.2.2 Cement Mortar 1:6 (1 cement : 6 coarse sand).
6.3 Brick work with common burnt clay machine moulded perforated bricks
of class designation 12.5 conforming to IS: 2222 in superstructure above
plinth level up to floor five level in cement mortar 1:6 (1 cement : 6
coarse sand) :
6.3.1 With F.P.S.(non modular) bricks
6.3.2 With Modular bricks
6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level in
all shapes and sizes in :
6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand)
6.5 Extra for brick work / AAC block masonry / Tile brick masonry in
superstructure above floor V level, for each four floors or part thereof by
mechanical means.
6.6 Extra for forming cavity 5 cm to 11.5 cm wide in cavity walls with
necessary weep and vent holes including use of cores and cost of
providing and fixing bitumastic coated M .S. ties 300 mm long of 25x3
mm section at not less than 3 ties per sqm as per approved design.
6.7 Providing half brick masonry with common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 in cement mortar 1:3 (1 Cement : 3
coarse sand) in superstructure for closing cavity 5 to 7.5 cm wide in
cavity wall complete with 10cm / 11.4 cm wide bitumen felt type 3
grade 1.
6.8 Brick work 7 cm thick with common burnt clay F.P.S. (non modular)
brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3
coarse sand) in superstructure above plinth level and upto floor five
level.
6.9 Brick work in plain arches in superstructure above plinth level and upto
floor five level including centering and shuttering complete for span up
to 6 metres with common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand).
Unit Rate

cum 6882.00
cum 6658.25

cum 5746.80
cum 5549.95

cum 8030.60
cum 7814.65

cum 8512.10
cum 8288.35

cum 142.00

sqm 193.80

metre 273.45

sqm 819.15

cum 13378.10
6.10 Brick work in gauged arches in superstructure above plinth level and
upto floor five level in cement mortar 1:3 (1 cement : 3 coarse sand) including centering and
shuttering complete, for span up to 6 meters with common burnt clay F.P.S. (non modular)
bricks of class designation
7.5.
6.11 Extra for additional cost of centering for arches exceeding 6m span including all
shuttering, bolting, wedging and removal (Area of the soffit
to be measured).
0004 Production cost of concrete by batch mix plant
6.12 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundations and plinth in :
6.12.1 Cement mortar 1:3 (1 cement : 3 coarse sand)
6.12.2 cement mortar 1:4 (1 cement : 4 coarse sand)
6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level.

6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand)

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand)
6.14 Extra for half brick masonry in superstructure, above floor V level for
every four floors or part thereof by mechanical means.
6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars
at every third course of half brick masonry.
BRICK TILE WORK
6.16 Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of
class designation 10 in foundation and plinth in:
6.16.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
6.16.2 Cement mortar 1:6 (1 cement : 6 coarse sand)
6.17 Tile brick masonry with common burnt clay machine moulded tile bricks of class
designation 12.5 conforming to IS : 2690 (Part I) in foundation
and plinth in cement mortar 1:6 (1 cement : 6 coarse sand).
6.18 Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of
class designation 10 in superstructure above plinth level up to
floor V level in cement mortar 1:6 (1 cement : 6 coarse sand).
6.20 Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of
class designation 10 in plain arch work in superstructure above plinth and upto floor five level
in cement mortar 1:4 (1 cement : 4
coarse sand) including centering and shuttering complete.
6.21 Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of
class designation 10 in gauged arch work in superstructure above plinth and upto floor five
level in cement mortar 1:4 (1 cement : 4
coarse sand) including centering and shuttering complete.
6.22 Tile brick masonry work 5 cm thick with common burnt clay F.P.S.
(non modular) tile bricks of class designation 10 in cement mortar 1:3 (1 cement : 3 coarse
sand) in superstructure above plinth and upto floor five level.

HONEY COMB WORK

6.23 Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of class
designation 7.5 in super structure above plinth level
upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand).
6.24 Extra for laying brick work in or under water and/or liquid mud including
cost of pumping or bailing out water and removing slush etc. complete.
NOTE :- The quantity will be calculated by multiplying the depth measured
from sub - soil water level up to the centre of gravity of brick work under sub - soil
water with the quantity of brick work in cum. executed under the sub - soil water.
The depth of centre of gravity shall be reckoned correct to 0.1 m, 0.05 m or more
shall be taken as 0.1 m and less than 0.05 m ignored.

6.25 Extra for laying brick work in or under foul position.

EXPOSED BRICK WALL
6.26 Brick work with common burnt clay selected F.P.S. (non modular) bricks of class
designation 7.5 in exposed brick work including making horizontal and vertical grooves
10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand)

6.26.1 From ground level upto plinth level

6.26.2 Above plinth level upto floor V level
6.27 Brick work with common burnt clay modular bricks of class designation
7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12
mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).

6.27.1 From ground level upto plinth level

6.27.2 Above plinth level upto floor V level
6.28 Brick work with common burnt clay machine moulded modular bricks of class
designation 12.5 in exposed brick work including making horizontal and vertical grooves
10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).

6.28.1 From ground level upto plinth level

6.28.2 Above plinth level upto floor V level
6.29 Brick work with common burnt clay machine moulded F.P.S. (non modular)
bricks of class designation 12.5 in exposed brick work including making horizontal and
vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6
coarse sand).
6.29.1 From ground level upto plinth level
6.29.2 Above plinth level upto floor V level
6.30 Brick work with common burnt clay machine moulded perforated F.P.S.
(non modular) bricks of class designation 12.5 conforming IS : 2222 in exposed brick work
including making horizontal and vertical grooves 10mm wide 12 mm deep complete in
cement mortar 1:6 (1 cement : 6 coarse sand).

6.30.1 From ground level upto plinth level

6.30.2 Above plinth level upto floor V level
6.31 Brick work with common burnt clay machine moulded perforated modular bricks of
class designation 12.5 conforming to IS : 2222 in exposed brick work including making
horizontal and vertical grooves 10 mm wide 12mm deep complete in cement mortar 1:6 (1
cement : 6 coarse sand).

6.31.1 From ground level upto plinth level

6.31.2 Above plinth level upto floor V level
6.32 Brick work with clay flyash F.P.S. (non modular) brick of class designation
7.5 in superstructure above plinth level up to floor five level in :

6.32.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand)
6.34 Brick work with non modular fly ash bricks conforming to IS:12894, class
designation 10 average compressive strength in super structure above plinth level up to floor
V level in :

6.34.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse sand)
6.35 Brick work with modular calcium silicate bricks machine moulded conforming
to IS:4139, class designation 10 average compressive strength in super structure above
plinth level up to floor V level in :

6.35.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

6.35.2 Cement mortar 1:6 (1 cement : 6 Coarse sand)
6.36 Brick work with modular extruded brunt fly ash clay sewer bricks
(Conforming to IS: 4885 ) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and
plinth :

6.36.1 Cement Mortar 1:4 ( 1 cement : 4 coarse sand)

6.37 Brick work with modular extruded brunt fly ash clay sewer bricks
(conforming to IS : 4885) in arches in foundation and plinth in cement mortar 1:3 ( 1 cement :
3 fine sand).

6.38 Providing and laying autoclaved aerated cement blocks masonry with 100 mm
thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4
(1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm
dia M.S. bars at
every third course of masonry work.
 cum 16714.70

sqm 575.25

sqm 862.90
sqm 837.85

sqm 1043.10
sqm 1018.05

sqm 12.60

sqm 86.45

cum 10321.40
cum 9963.45

cum 9963.45

cum 11659.70

cum 16791.90

cum 20135.45

sqm 841.85
 sqm 645.95
cum per 905.50
metre depth

cum 385.25

cum 6849.50
cum 8565.95

cum 5588.65
cum 7218.75

cum 6500.85
cum 8131.00

cum 6769.65
cum 8339.65

cum 6439.20
cum 8069.30
cum 6240.25
cum 7870.35

cum 8414.65
cum 8190.90

cum 7873.20
cum 7676.30

cum 8589.95
cum 8393.05

cum 6528.70

cum 11763.25

cum 8890.80
6.40 Providing and laying Gypsum panel partitions 100 mm thick with water
proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor
Gypsum fixed with tongue and groove, jointed with bonding plaster as per
manufacturer’s specifications in superstructure above plinth level up to floor V
level. Gypsum blocks will have a minimum
compressive strength of 9.3 kg/cm2
6.41 Extra for Gypsum panel Partitions in superstructure above floor V level
for every four floors or part thereof.
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay
0004 Production cost of concrete by batch mix plant

F.P.S. (non modular) bricks of class designation 7.5 including

grouting with cement mortar 1:4 (1 cement : 4 fine sand).
6.45 Half brick masonry with non modular fly ash bricks of class designation 10,
conformingio IS :12894, in super structure above plinth and upto floor V level.

6.45.1 Cement mortar 1 : 3 (1 cement : 3 coarse sand)

6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand)
6.47 Providing and laying autoclaved aerated cement blocks masonry with
150mm/230mm/300 mm thick AAC blocks in super structure above plinth level
up to floor V level with RCC band at sill level and lintel level with approved
block laying polymer modified adhesive mortar all complete as per direction
of Engineer-in-Charge. (The payment of RCC
band and reinforcement shall be made for seperately).
SUB HEAD : 7.0
STONE WORK

145
sqm 870.10

sqm 149.30

metre 55.80

sqm 994.75
sqm 969.65

cum 6994.15
 BASIC RATES (SH: 7.0 STONE WORK)
Code Description
No.
0011 Hire charges of Pump set of capacity 4000 litres/hour

Bandhani
0004 Production cost of concrete by batch mix plant

0101 Bhisti

0102 Blacksmith 1st class

0103 Blacksmith 2nd class

0112 Carpenter 2nd class

0114 Beldar

0115 Coolie

0116 Fitter (grade 1)

0123 Mason (brick layer) 1st class

0124 Mason (brick layer) 2nd class

0125 Mason (for plain stone work) 2nd class

0126 Mason (for ornamental stone work) 1st class

0139 Skilled Beldar (for floor rubbing etc.)

0367 Portland Cement (OPC-43 Grade)

0373 Cramp Gun metal 25x6x300 mm

0873 Copper pins 6 mm dia 7.5 cm long

1002 Mild steel round bar 12 mm dia and below

1007 Structural steel such as tees, angles channels and R.S. joists

1034 Bolts and nuts up to 300 mm in length

1154 Through and bond stone

1157 Stone for masonry work

1160 Red sand stone block

1161 White sand stone block

1163 White sand stone slab 75 mm thick (un-dressed)

1164 Red sand stone slab 40 mm thick (un-dressed)

1165 White sand stone slab 40 mm thick (un-dressed)

1166 Red sand stone slab 30 mm thick (un-dressed)

1169 Kota stone slab 25mm thick (rough chiseled)

No.
1197 Second class kail wood in scantling

1215 Welding by electric plant

1225 Mild steel flat strap fitting

1237 Cutting marble or sand stone slab up to 50 mm thick by mechanical device

2204 Carriage of Timber

2215 Carriage of Soling stone & masonry stone

2216 Carriage of Stone blocks white & red sand stone & kota stone slab

2302 Carriage of G.I. sheet and accessories

2750 8 mm thick granite stone tiles (mirror polished of all shades)

4009 Mild steel tubes hot finished welded type

7339 Stainless steel cramp

7439 8mm thick (mirror polished tiles machine cut edge) Raj Nagar white

8683 Red sand stone gang saw cut 30 mm thick

8684 White sand stone gang saw cut 30 mm thick

8698 Stainless steel cramps(weight 260 grams) with nuts, bolts and washer for dry
stone cladding

9977 Carriage

9999 Sundries
ORK)
Unit Rate

day 700.00

day 714.00

day 714.00

day 784.00

day 714.00

day 714.00

day 645.00

day 645.00

day 784.00

day 784.00

day 714.00

day 714.00

day 784.00

day 714.00

tonne 5000.00

each 80.00

each 10.00

quintal 4850.00

quintal 4950.00

quintal 5200.00

100 Nos 5000.00

cum 1100.00

10 cudm 80.00

10 cudm 205.00

sqm 800.00

sqm 230.00

sqm 250.00

sqm 220.00

sqm 250.00
10 cudm 260.00

cm 2.00

quintal 4120.00

metre 10.00

cum 187.35

cum 192.86

tonne 145.72

tonne 145.72

sqm 690.00

kg 60.00

kg 290.00

sqm 450.00

sqm 476.00

sqm 560.00

each 115.00

L.S. 2.12

L.S. 2.12
 7.0 STONE WORK
Code No. Description

RANDOM RUBBLE MASONRY

0004
Production
7.1 Random rubble masonry with hard stone in foundation and plinth including
cost of levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded
concrete stone aggregate 20 mm nominal size) upto plinth level with :
by batch
mix plant 7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand)
7.2 Random rubble masonry with hard stone in superstructure above plinth level and
upto floor five level, including leveling up with cement concrete 1:6:12 (1
cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at
window sills, ceiling level and the like.
7.2.1 Cement mortar 1:6 (1 cement : 6 coarse sand)
7.4 Extra for random rubble masonry with hard stone in :
7.4.1 Square or rectangular pillars
7.4.2 Circular pillars
7.5 Extra for random rubble masonry with hard stone curved on plan for a
mean radius not exceeding 6 m.
COURSED RUBBLE MASONRY
7.6 Coursed rubble masonry (first sort) with hard stone in foundation and plinth
with :
7.6.1 Cement mortar 1:6 (1 cement : 6 coarse sand)
7.7 Coursed rubble masonry (second sort) with hard stone in foundation & plinth
with :
7.7.1 Cement mortar 1:6 (1 cement : 6 coarse sand)
7.8 Coursed rubble masonry with hard stone (first or second sort) in
superstructure above plinth level and upto floor five level.
7.8.1 Masonry work (first sort), in cement mortar 1:6 (1 cement :
6 coarse sand)
7.8.2 Masonry work (second sort), in cement mortar 1:6 (1 cement:
6 coarse sand)
7.10 Extra for coursed rubble masonry with hard stone (first or second sort) in:

7.10.1 Square or rectangular pillars

7.10.2 Circular pillars
7.11 Extra for coursed rubble masonry with hard stone (first or second sort)
curved on plan for a mean radius not exceeding 6 m.
ASHLAR MASONRY
7.12 Stone work in plain ashlar in super structure upto floor five level in cement
mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2
(1 white cement : 2 stone dust) with an admixture of pigment
matching the stone shade :
Unit Rate

cum 6653.45

cum 8275.70

cum 787.05
cum 2160.20

cum 888.30

cum 7914.50

cum 7380.35

cum 9508.65

cum 8974.50

cum 873.05
cum 2450.90

cum 962.90
 7.12.1 One face dressed
7.12.1.1 Red sand stone
7.12.1.2 White sand stone
7.12.2 Both face dressed
0004 Production cost of concrete by batch mix plant

7.12.2.2 White sand stone

7.13 Stone work plain ashlar in arches in super structure upto floor V level in cement
mortar 1:3 (1 cement : 3 coarse sand) including centering, shuttering and pointing with white
cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the
stone shade.

7.13.1 One face dressed

7.13.1.1 Red sand stone
7.13.1.2 White sand stone
7.13.2 Both face dressed
7.13.2.1 Red sand stone
7.13.2.2 White sand stone
7.14 Stone work plain ashlar in domes , in super structure upto floor V level in cement
mortar 1:3 (1 cement : 3 coarse sand) including centering, shuttering and pointing with white
cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the
stone shade.
7.14.1 One face dressed
7.14.1.1 Red sand stone
7.14.1.2 White sand stone
7.14.2 Both face dressed
7.14.2.1 Red sand stone
7.14.2.2 White sand stone
7.15 Stone work ashlar punched (ordinary) in superstructure upto floor five level in
cement mortar 1:6 (1 white cement : 6 coarse sand) including pointing with cement mortar
1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade.

7.15.1 One face dressed

7.15.1.1 Red sand stone
7.15.1.2 White sand stone
7.15.2 Both faced punched
7.15.2.1 Red sand stone
7.15.2.2 White sand stone
7.16 Extra for stone work, random rubble / coursed rubble masonry / ashlar
masonry above floor V level for every four floors or part thereof.
cum 50995.00
cum 73288.00

cum 69930.00

cum 92223.00

cum 57116.00
cum 79409.00

cum 76051.00
cum 98344.00

cum 89552.00
cum 111845.00

cum 135354.00
cum 157648.00

cum 48225.00
cum 70518.00

cum 64389.00
cum 86682.00

cum 1726.00
7.17 Extra for plain ashlar or ashlar punched in :
7.17.1 Square or rectangular pillars cum
7.18 Extra for stone work; plain ashlar or ashlar punched curved on plan with
a mean radius not exceeding 6 m. cum
0004 Production cost of concrete by batch mix plant

SUNK, MOULDED, CARVED ASHLAR MASONRY

7.20 Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar
1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone
dust) with an admixture of pigment matching the stone shade :

7.20.1 Red sand stone cum

7.20.2 White sand stone cum
7.21 Extra for stone work ashlar sunk or moulded or sunk and moulded or carved in :

7.21.1 Triangular or Square or rectangular pillars cum

7.21.2 Circular or polygonal pillars cum
7.22 Extra for stone work ashlar sunk or moulded in cornices. per metre
per cm
girth
(60cm deep)
MISCELLANEOUS STONE WORK
7.24 Extra for stone work (veneer work) curved on plan with a mean radius
not exceeding 6 m. cum
7.26 Providing and fixing stone dowels 10x5x2.50 cm cut to double wedge shape as per design in
cement mortar 1:2 (1 cement : 2 coarse sand),
including making the necessary chases. each
7.28 Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as
measured along the slope in cement mortar 1:4 (1 cement : 4 coarse sand) with 12 mm diameter anchoring
steel bar, 45 cm long, fixed in each stone and supported on and including with bricks cove in cement mortar
1:4 (1 cement : 4 coarse sand), including pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with
an admixture of pigment matching the stone shade :

7.28.1 Red sand stone :

7.28.1.1 With common burnt clay F.P.S.(non modular)
bricks of class designation 7.5 sqm
7.28.2 White sand stone :
7.28.2.1 With common burnt clay F.P.S.(non modular)
bricks of class designation 7.5 sqm
 2544.00

1770.00

575.25

72673.00
94967.00

3319.00
9403.00
249.95

2544.00

48.55

2297.90

2334.65
7.29 Providing and fixing horizontal chajja of stone 40 mm thick and upto 80
cm projection in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in white
cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the
stone shade :
7.29.1 Red sand stone
7.29.2 White sand stone
7.30 30 mm red sand stone sun-shade (chisel-dressed) supported on red sand stone
brackets, fixed in walls with cement mortar 1:4 (1 cement :
0004 Production cost of concrete by batch mix plant
7.31 Providing and fixing red sand stone brackets 55x22.5x45 cm sunk and moulded
including providing and fixing with 4 Nos gun metal cramp 25x6 mm 30 cm long

7.32 Stone work, plain in copings, cornices, string courses and plinth courses, upto 75
mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white
cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the
stone shade.
7.32.1 Red sand stone
7.32.2 White sand stone
7.33 Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1
cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2
stone dust) with an admixture of pigment, matching the stone shade, jali slab without any
chamfers etc.
7.33.1 Red sand stone
7.33.2 White sand stone
7.34 Extra for laying stone work in or under water and/or liquid mud including
cost of pumping or bailing out water and removing slush etc. complete.

NOTE :- The quantity will be calculated by multiplying the depth measured

from sub-soil water level up to the centre of gravity of stone work under sub -
water with the quantity of stone work in cum executed under the sub-soil water.
The depth of centre of gravity shall be reckoned correct to 0.1 m, 0.05 m or more
shall be taken as 0.1 m and less than
0.05 m ignored.

7.35 Extra for laying stone work in or under foul position.

7.38 Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement
with an admixture of pigment to match the stone shade.

7.38.1 8mm thick (mirror polished and machine cut edge)

7.38.1.1 Granite stone of any colour and shade
7.38.1.2 Raj Nagar plain white marble/ Udaipur green
marble/ Zebra black marble
 SUB HEAD : 8.0
CLADDING WORK

153
 sqm 1448.05
sqm 1480.15

sqm 1703.00

each 5362.25

cum 72090.35
cum 94383.70

sqm 12241.70
sqm 12271.15
cum per 905.50
metre
depth

cum 385.25

sqm 2675.70

sqm 2346.55
K
 BASIC RATES (SH: 8.0 CLADDING WORK)
Code No. Description

0013 Machine for rubbing of floors

0019 Hand Grinder for mirror polish

Bandhani
0004 Production cost of concrete by batch mix plant

0101 Bhisti
0102 Blacksmith 1st class
0114 Beldar
0115 Coolie
0116 Fitter (grade 1)
0123 Mason (brick layer) 1st class
0124 Mason (brick layer) 2nd class
0126 Mason (for ornamental stone work) 1st class
0128 Mate
0139 Skilled Beldar (for floor rubbing etc.)
0367 Portland Cement (OPC-43 Grade)
0368 White Cement
0874 Black colour dark shade pigment
1034 Bolts and nuts up to 300 mm in length
1239 18 mm thick Flamed finish granite stone slab
1240 18 mm thick Italian Marble stone slab, Perlato (slab area up to 0.5 sqm).

2209 Carriage of Cement

2216 Carriage of Stone blocks white & red sand stone & kota stone slab

2750 8 mm thick granite stone tiles (mirror polished of all shades)

2751 8 mm thick marble tiles (polished) Raj Nagar
4009 Mild steel tubes hot finished welded type
7244 Table rubbed polished stone 18 mm thick (75x50cm) Agaria Marble stone - 18
mm thick

7245 Table rubbed polished stone 18mm thick (75x50cm) Granite stone-18 mm thick

7295 Granite of colour black, cherry/ruby red 18 mm thick (slab area upto 0.50 sqm)

7296 Granite of colour black, cherry/ruby red 30 mm thick (slab area upto 0.50 sqm)
7297 Granite of all colour except black, cherry/ruby red 18 mm thick (slab area upto
0.50 sqm)

7298 Granite of colour black, cherry/ruby red 18 mm thick (slab area above 0.50 sqm)

7299 Granite of all colour except black, cherry/ruby red 18 mm thick (slab area above
0.50 sqm)

7300 Granite of all colour except black, cherry/ruby red 30 mm thick (slab area above
0.50 sqm)

7338 Gun metal cramp

7339 Stainless steel cramp
7430 Wedge expansion hold fastener 1/4" or 6 mm
7431 Wedge expansion hold fastener 3/8" or 10 mm
7432 Wedge expansion hold fastener 1/2" or 12 mm
7452 Raj nagar plain white marble (table rubbed and polished) 18 mm thick (slab area
upto 0.50 sqm)

7453 Raj nagar plain white marble (table rubbed and polished) 18 mm thick (slab area
more than 0.50 sqm)

9977 Carriage
9999 Sundries
WORK)
Unit Rate

day 300.00

day 250.00
day 714.00
day 714.00
day 784.00
day 645.00
day 645.00
day 784.00
day 784.00
day 714.00
day 784.00
day 714.00
day 714.00
tonne 5000.00
tonne 11200.00
kg 70.00
quintal 5200.00
sqm 1000.00

sqm 3209.00

tonne 145.72

tonne 145.72

sqm 690.00
sqm 400.00
kg 60.00

sqm 1500.00

sqm 1800.00

sqm 1800.00

sqm 1900.00
sqm 1000.00

sqm 2000.00

sqm 1200.00

sqm 2100.00

kg 315.00
kg 290.00
each 8.00
each 10.00
each 24.00

sqm 538.00

sqm 650.00

L.S. 2.12
L.S. 2.12
 8.0 CLADDING WORK

Code No. Description

0004
Production
8.1 of
cost Marble work gang saw cut (polished and machine cut) of thickness 18
concrete
by batch mm for wall lining (veneer work), backing filled with a grout of average 12
mix plant mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including
pointing with white cement mortar 1:2 (1 white cement : 2 marble dust)
with an admixture of pigment to match the marble shade (To be secured
to the backing by means of cramps, which shall be paid for separately).
8.1.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra
black marble.
8.1.1.1 Area of slab upto 0.50 sqm
8.1.1.2 Area of slab over 0.50 sqm
8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen platforms, vanity
counters, window sills, facias and similar locations of required size,
approved shade, colour and texture laid over 20 mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,
mixed with matching pigment, epoxy touch ups, including rubbing, curing,
moulding and polishing to edges to give high gloss finish etc. complete
at all levels.
8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra
black marble
8.2.1.1 Area of slab upto 0.50 sqm
8.2.1.2 Area of slab over 0.50 sqm
8.2.2 Granite stone slab colour black, Cherry/Ruby red
8.2.2.1 Area of slab upto 0.50 sqm
8.2.2.2 Area of slab over 0.50 sqm
8.2.3 Granite stone slab all colour and texture except black, Cherry/
Ruby red
8.2.3.1 Area of slab upto 0.50 sqm
8.2.3.2 Area of slab over 0.50 sqm
8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities
etc., including machine polishing to edge to give high gloss finish etc.
complete as per design approved by Engineer-in-Charge.
8.3.1 Marble work
8.3.2 Granite work
8.4 Extra for fixing marble /granite stone, over and above corresponding
basic item, in facia and drops of width upto 150 mm with epoxy resin
based adhesive, including cleaning etc. complete.
Unit Rate

sqm 4827.40
sqm 4998.10

sqm 2906.45
sqm 2639.45

sqm 4679.35
sqm 4425.35

sqm 3555.45
sqm 3301.45

metre 244.90
metre 418.85

metre 475.55
8.5 Extra for providing opening of required size & shape for wash basin/
kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone
work, including necessary holes for pillar taps
etc. including moulding, rubbing and polishing of cut edges etc.
complete.
8.6 Mirror polishing on marble work/Granite work/stone work where ever
0004 Production cost of concrete by batch mix plant
8.7 Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry
backing with cement mortar 1:2 ( 1 cement :2 coarse sand), including drilling necessary hole
in stones and embedding the cramp in the hole (fastener to be paid separately).

8.7.1 Gunmetal cramps

8.7.2 Stainless steel cramps
8.8 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry
surface backing including drilling necessary holes and the cost of bolt etc complete.

8.8.1 Wedge expansion type

8.8.1.1 Fastener with threaded dia 6 mm
8.8.1.2 Fastener with threaded dia 10 mm
8.8.1.3 Fastener with threaded dia 12 mm
8.9 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar
1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white
cement complete.

8.9.1 8mm thick

8.9.1.1 Raj nagar plain white marble/ Udaipur green
marble/ Zebra black marble
8.9.1.2 Granite of any colour and shade
8.10 Providing and fixing stone slab with table rubbed, edges rounded and polished,
of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of
appropriate width with chase cutter and embedding the stone in the chase with epoxy grout
or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm
nominal size) as per direction of Engineer-in-charge and finished smooth.

8.10.1 White Agaria Marble Stone

8.10.2 Granite Stone of approved shade
8.11 Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for
wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and
pattern wherever required, stones of different finished surface texture, on 12 mm (average)
thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement
each 808.15

sqm 417.60

kg 639.05
kg 624.95

each 30.75
each 33.80
each 52.85

sqm 2707.80
sqm 3105.50

sqm 3061.20
sqm 3542.85
slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed
with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings,
directed by the Engineer-in-Charge.
8.11.1 18 mm thick Italian Marble stone slab,Perlato, Rosso verona,
Fire Red or Dark Emperadore etc. sqm 9278.95
8.14 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled wit
grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mort
(1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the back
the sides by means of cramps and pins which shall be paid for separately) :
8.14.1 Red sand stone - exposed face fine dressed with rough backing.

8.14.1.1 70 mm thick
8.14.1.2 60 mm thick
8.14.1.3 50 mm thick
0004 Production cost of 40 mm thick
concrete by batch mix plant
8.14.1.5 30 mm thick
8.14.2 Red sand stone - Exposed face machine cut and table
rubbed with rough backing.
8.14.2.1 70 mm thick
8.14.2.2 60 mm thick
8.14.2.3 50 mm thick
8.14.2.4 40 mm thick
8.14.2.5 30 mm thick
8.14.3 White sand stone - exposed face fine dressed with rough
backing .
8.14.3.1 70 mm thick
8.14.3.2 60 mm thick
8.14.3.3 50 mm thick
8.14.3.4 40 mm thick
8.14.3.5 30 mm thick
8.14.4 White sand stone - Exposed face machine cut and table
rubbed with rough backing.
8.14.4.1 70 mm thick
8.14.4.2 60 mm thick
8.14.4.3 50 mm thick
plete as per Architectural drawings, and as

78.95
o 10 metre height, backing filled with a
uding pointing in white cement mortar 1:2
shade : (To be secured to the backing and

sqm 4824.75
sqm 4676.05
sqm 4527.65
sqm 4378.65
sqm 4229.85

sqm 6651.90
sqm 6503.15
sqm 6354.75
sqm 6205.80
sqm 6057.00

sqm 6385.60
sqm 6013.95
sqm 5643.15
sqm 5269.75
sqm 4898.65

sqm 8212.75
sqm 7841.10
sqm 7470.30
 8.14.4.4 40 mm thick

8.14.4.5 30 mm thick
8.14.5 Gang saw cut stone
8.14.5.1 30mm thick White sand stone

0004 Production cost of concrete by batch mix plant

8.15 Providing and fixing stainless steel cramps of required size and shape for anchoring
stone wall lining to the backing or securing adjacent stones in stone wall lining in cement
mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and
holes in walls

wherever required.
8.16 Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent
stones in stone wall lining in cement mortar 1:2 (1 cement : 2
coarse sand), including making the necessary chases.
8.17 Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough
facing on the exposed surface with stone strips of minimum length 300 mm and required width,
including embedding every tenth layer and bottom most layer in masonry or concrete after
making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12
mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement
mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of
stone complete as per

direction of Engineer-in-charge.
8.18 Stone work (machine cut edges Veneer work) for wall lining upto 10 m height,
backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and
jointed with Cement mortar 1:2 (1 cement
: 2 stone dust), including rubbing and polishing complete. (To be secured to the backing and
the sides by means of cramps and pins which shall be paid for separately).

8.18.1 Kota stone slabs exposed face dressed and rubbed.

8.18.1.1 25 mm thick
8.19 Extra for stone work for wall lining on exterior walls of height more than
10 m from ground level for every additional height of 3 m or part there of.
STONE WORK DRY CLADDING
8.20 Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw
cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural
steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved
weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel
frame work, stainless steel cramps and pins etc. shall be paid for separately).

8.20.1 Red sand stone - 30mm thick gang saw cut stone
8.20.2 White sand stone - 30mm thick gang saw cut stone
sqm 7096.90

sqm 6725.80

sqm 2757.45

sqm 2639.45

kg 624.95

each 37.60

sqm 2607.45

sqm 3122.30
sqm 140.85

sqm 2459.70
sqm 2577.70
8.21 Providing and fixing structural steel frame (for dry cladding with 30 mm
thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S.
square/ rectangular tube in the required pattern as per architectural drawing, including cost of
cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S.
brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in
brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone
aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary
centring and shuttering and with approved expansion hold fasteners on CC/RCC surface,
including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame
work to support stone cladding, the steel work will be given a priming coat of Zinc primer as
approved by Engineer- in-charge and painted with two or more coats of epoxy paint (Shop
drawings shall be submitted by the contractor to the Engineer-in-charge for approval before
execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only
structural steel frame work shall be measured for the purpose of payment, stainless steel
cramps shall be paid for separately and nothing extra shall be paid).

8.22 Providing and fixing adjustable stainless steel cramps of approved quality,
required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight
not less than 260 gms), for dry stone cladding fixed on frame work at suitable location,
including making necessary recesses in stone slab, drilling required holes etc complete as
per direction of the Engineer-in-charge.

8.23 Providing 50x50x50 mm 2nd class teak wood plugs including cutting brick work
and fixing in cement mortar 1:3 (1 cement : 3 fine sand) and making good the walls etc.

8.24 Providing and fixing expandable fasteners of specified size with necessary plastic
sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and
making good etc. complete.

0004 Production cost of concrete by batch mix plant

8.24.2 32 mm long
8.24.3 40 mm long
8.24.4 50 mm long
8.25 Providing and fixing 2nd class teak wood plain lining tongued and grooved,
including wooden plugs complete with necessary screws and priming coat on unexposed
surface.

8.25.1 40 mm thick
8.25.2 25 mm thick
8.25.3 20 mm thick
8.25.4 12 mm thick
8.26 Providing and fixing in wall lining flat pressed three layer (medium density)
particle board or graded wood Pre-laminated one side decorative lamination and other
side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on
unexposed arrangement and screws etc. complete :

8.26.1 12 mm thick
8.26.2 18 mm thick
8.26.3 25 mm thick
8.27 Providing and fixing specified wood frame work consisting of battens 50x25mm
fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat
complete.
8.27.1 Kiln seasoned and chemically treated hollock wood
8.28 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming
to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat
on unexposed surface with :
8.28.1 Decorative veneer facings of approved manufacture
8.29 Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain
lining with necessary screws, priming coat on unexposed surface
etc., complete.
8.30 Providing and fixing skirting with Pre-laminated (one side decorative and other
side balancing lamination) flat pressed 3 layer or graded particle board (medium density)
Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws,
including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface
complete :

8.30.1 18 mm thick
8.30.2 25 mm thick
8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622
(thickness to be specified by the manufacturer), of approved make, in all colours, shades
except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in
skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3
coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in
white cement mixed with pigment of matching shade

complete.
8.32 Designing, fabricating, testing, installing and fixing in position Curtain Wall with
Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear
portions of the building , for all heights and all levels etc. including:

(a) Structural analysis & design and preparation of shop drawings for pressure
equalisation or rain screen principle as required, proper drainage of water to
make it watertight including checking of all the structural and functional design.
(b) Providing, fabricating and supplying and fixing panels of aluminium
composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick
aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between
Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated
Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on fa
and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers,
weather silicone sealant, backer rods etc.
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations an
serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved
in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per
specification and drawing The item includes cost of all material & labour component, the cost of all mock u
site, cost of all samples of the individual components for testing in an approved laboratory, field tests on th
assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the c
wall with aluminium composite panel cladding till the handing over of the building for occupation. Base fra
work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtai
with aluminium composite panel cladding, having all the performance characteristics all complete , as p
Architectural drawings, as per item description, as specified, as per the approved shop drawings and a
directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the ext
face of the curtain wall with Aluminum Composite Panel Cladding (including width of
groove) shall be measured in sqm. up to two decimal places. sqm 4474.20
 SUB HEAD : 9.0
WOOD AND P.V.C. WORK

165
 kg 220.00

each 365.65

each 35.50

each 19.30
each 20.75
each 24.75
each 26.10

sqm 6187.90
sqm 4106.45
sqm 3330.20
sqm 2220.05
sqm 1216.35
sqm 1304.65
sqm 1731.45

cum 163814.10

sqm 1645.80

sqm 1549.45

sqm 1723.05
sqm 2149.85

sqm 1063.45
 um
oved shades made out of 4mm thick
mineral core sandwiched between two
l cladding sheet shall be coil coated, with
of approved colour and shade on face # 1
steel screws, nuts, bolts, washers, cleats,

ot Dip Galvanised with serrations and

6 Pins and anchor bolts of approved make
ete required to perform as per
ur component, the cost of all mock ups at
approved laboratory, field tests on the
ng, cleaning and protection of the curtain
he building for occupation. Base frame
The Contractor shall provide curtain wall
characteristics all complete , as per the
the approved shop drawings and as
ent, only the actual area on the external
uding width of
m 4474.20
ORK
 BASIC RATES (SH: 9.0 WOOD AND P.V.C. WORK)
Code No. Description

0100 Bandhani

0101 Bhisti
Blacksmith 1st class
0004 Production cost of concrete by batch mix plant

0103 Blacksmith 2nd class

0111 Carpenter 1st class
0112 Carpenter 2nd class
0114 Beldar
0116 Fitter (grade 1)
0119 Glazier
0123 Mason (brick layer) 1st class
0124 Mason (brick layer) 2nd class
0130 Mistry
0131 Painter
0156* Carpenter (average)
0162 Labour for fabrication of uPVC extruded casement/ sliding win- dows and doors
including drilling holes, fixing of fittings & hard wares, hire charges of drill
machine and electricity charges etc.

0163 Labour for installation of uPVC extruded casement/ sliding windows

and doors including scaffolding
0237 Multi purpose fibre reinforced by organic fibres and/or inorganic synthetic fibres
cement board 8 mm thick

0243 8 mm thick mulitipurpose cement bonded wood particle board conforming to IS :

14276

0305 Bamboo 25 mm dia 2.5 metre long

0341 Flat pressed 3 layer particle board (medium density) Grade 1, 12 mm thick

0346 Extra for veneered particle board with Teak veneering on one side and
commercial veneering on other side

0347 Extra for veneered particle board with Commercial veneering on both sides

0348 Extra for veneered particle board with Teak veneering on both sides
0378 Brass butt hinges (light/ordinary type) : 125x70x4 mm
0379 Brass butt hinges (light/ordinary type) : 100x70x4 mm
0380 Brass butt hinges (light/ordinary type) : 75x40x2.5 mm
0381 Brass butt hinges (light/ordinary type) : 50x40x2.5 mm
0382 Brass butt hinges (heavy type) : 125x85x5.5 mm(0.70 kg)
0383 Brass butt hinges (heavy type) : 100x85x5.5 mm(0.56 kg)
0384 Brass butt hinges (heavy type) :75x65x4.0 mm (weighing not less than 0.20 kg)

0385 Brass parliamentary hinges 150x125x27x5 mm

0386 Brass parliamentary hinges 125x125x27x5 mm

0387 Brass parliamentary hinges 100x125x27x5 mm
0388 Brass parliamentary hinges 75x100x20x3.2 mm
0400 Brass tower bolt (barrel type) 250x10 mm
0401 Brass tower bolt (barrel type) 200x10 mm
0402 Brass tower bolt (barrel type) 150x10 mm
0403 Brass tower bolt (barrel type) 100x10 mm
0408 Brass handles 125 mm with plate 175x32 mm
0409 Brass handles 100 mm with plate 150x32 mm
0410 Brass handles 75 mm with plate 125x32 mm
0411 Brass door latch 300x16x5 mmweighing not less than 0.380 kg
0412 Brass door latch 250x16x5 mm weighing not less than 0.350 kg
0413 Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever
handles

0414 Brass mortice latch 100x65mm with a pair of brass lever handles
0423 Brass casement window fastener
0424 Brass casement stays (straight peg type) 300 mm weighing not less than 0.33
kg

0425 Brass casement stays (straight peg type) 250 mm weighing not less than 0.28
kg

0426 Brass casement stays (straight peg type) 200 mm weighing not less than 0.24
kg

0431 Brass hasps and staples (safety type) 150 mm

0432 Brass hasps and staples (safety type) 115 mm
0433 Brass hasps and staples (safety type) 90 mm
0438 Brass night latch
0447 Brass cupboard knob or wardrobe knob 50 mm
0449 Brass screws 50 mm
0450 Brass screws 40 mm
0451 Brass screws 30 mm
0452 Brass screws 25 mm
0453 Brass screws 20 mm
0552 75mm SS fancy handles for kitchen cabinet
0553 100mm SS fancy handles for kitchen cabinet
0554 125mm SS fancy handles for kitchen cabinet
0555 Chromium plated Brass handles 125 mm with plate 175 x32 mm
0556 Chromium plated Brass handles 100 mm with plate 150 x 32 mm
0557 Chromium plated Brass handles 75mm with plate 125x32 mm
0558 Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a
pair of brass lever handles

0568 Chromium plated brass casement window fastener

0569 Chromium plated Brass casement stays (straight peg type) 300 mm weighing
not less than 0.33 kg

0570 Chromium plated Brass casement stays (straight peg type) 250 mm weighing
not less than 0.28 kg

0571 Chromium plated Brass casement stays (straight peg type) 200 mm weighing
not less than 0.24 kg

0583 Chromium plated Brass Night latch

0584 Chromium plated Brass Wardrobe Knob 50 mm
0585 Chromium plated Brass screws 50 mm
0586 Chromium plated Brass screws 40 mm
0587 Chromium plated Brass screws 30 mm
0588 Chromium plated Brass screws 25 mm
0589 Chromium plated Brass screws 20 mm
0590 Chromium plated Brass curtain rod 12 mm dia 1.25mm thick
0591 Chromium plated Brass curtain rod 20 mm dia 1.25mm thick
0592 Chromium plated Brass curtain rod 25 mm dia 1.25mm thick
0594 Bright finished or black enameled mild steel butt hinges 125x65x
2.12 mm

0595 Bright finished or black enameled mild steel butt hinges 100x58x
1.90 mm

0596 Bright finished or black enameled mild steel butt hinges 75x47x
1.70 mm

0597 Bright finished or black enameled mild steel butt hinges 50x37x
1.50 mm

0608 Nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide

0635 Bright finished or black enameled mild steel screws 50 mm

0637 Bright finished or black enameled mild steel screws 40 mm
0638 Bright finished or black enameled mild steel screws 30 mm
0639 Bright finished or black enameled mild steel screws 25 mm
0640 Bright finished or black enameled mild steel screws 20 mm
0641 Bright finished or black enameled mild steel bolts and nuts 50x6 mm

0642 Oxidised mild steel butt hinges 125x65x2.12 mm

0643 Oxidised mild steel butt hinges 100x58x1.90 mm
0644 Oxidised mild steel butt hinges 75x47x1.70 mm
0645 Oxidised mild steel butt hinges 50x37x1.50 mm
0646 Oxidised mild steel parliamentary hinges 150x125x27x2.8 mm
0647 Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm
0648 Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm
0649 Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm
0650 Oxidised mild steel single acting spring hinges 150 mm
0651 Oxidised mild steel single acting spring hinges 125 mm
0652 Oxidised mild steel single acting spring hinges 100 mm
0653 Oxidised mild steel double acting spring hinges 150 mm
0654 Oxidised mild steel double acting spring hinges 125 mm
0655 Oxidised mild steel double acting spring hinges 100 mm
0656 Nickel plated mild steel piano hinges 1 mm thick 35 mm wide
0660 Oxidised mild steel sliding door bolt 300x16 mm
0661 Oxidised mild steel sliding door bolt 250x16 mm
0662 Oxidised mild steel door latch 300x20x6 mm
0663 Oxidised mild steel door latch 250x20x6 mm
0664 Oxidised mild steel tower bolt (barrel type) 250x10 mm
0665 Oxidised mild steel tower bolt (barrel type) 200x10 mm
0666 Oxidised mild steel tower bolt (barrel type) 150x10 mm
0667 Oxidised mild steel tower bolt (barrel type) 100x10 mm
0668 Oxidised mild steel handles 125 mm
0669 Oxidised mild steel handles 100 mm
0670 Oxidised mild steel handles 75 mm
0679 Oxidised mild steel hasps and staples (safety type) 150 mm
0680 Oxidised mild steel hasps and staples (safety type) 115 mm
0681 Oxidised mild steel hasps and staples (safety type) 90 mm
0682 Oxidised mild steel screws 50 mm
0683 Oxidised mild steel screws 40 mm
0684 Oxidised mild steel screws 30 mm
0685 Oxidised mild steel screws 25 mm
0686 Oxidised mild steel screws 20 mm
0687 Anodised Aluminium butt hinges 125x75x4 mm
0688 Anodised Aluminium butt hinges 125x63x4 mm
0689 Anodised Aluminium butt hinges 100x75x4 mm
0690 Anodised Aluminium butt hinges 100x63x3.2 mm
0691 Anodised Aluminium butt hinges 100x63x4 mm
0692 Anodised Aluminium butt hinges 75x63x4 mm
0693 Anodised Aluminium butt hinges 75x63x3.2 mm

0694 Anodised Aluminium butt hinges 75x45x3.2 mm

0696 Anodised Aluminium sliding door bolt 300x16 mm
0697 Anodised Aluminium sliding door bolt 250x16 mm
0698 Anodised Aluminium tower bolt (barrel type) 300x10 mm
0699 Anodised Aluminium tower bolt (barrel type) 250x10 mm
0700 Anodised Aluminium tower bolt (barrel type) 200x10 mm
0701 Anodised Aluminium tower bolt (barrel type) 150x10 mm
0702 Anodised Aluminium tower bolt (barrel type) 100x10 mm
0703 Anodised Aluminium handles 125 mm with plate 175 x 32 mm
0704 Anodised Aluminium handles 100 mm with plate 150 x 32 mm
0705 Anodised Aluminium handles 75mm with plate 125 x 32 mm
0706 Anodised Aluminium kicking plate 50 cm long 100x3.15 mm
0713 Block board construction flush door with teak wood ply on both faces 35 mm
thick

0714 Block board construction flush door with teak wood ply on both faces 30 mm
thick

0715 Block board construction flush door with teak wood ply on both faces 25 mm
thick

0717 Block board construction flush door with commercial ply on both faces 35 mm
thick

0718 Block board construction flush door with commercial ply on both faces 30 mm
thick

0719 Block board construction flush door with commercial ply on both faces 25 mm
thick

0752 Block board construction flush door lipping 25 mm thick

0753 Square vision panel in Block board construction flush door not exceeding 0.10
sqm

0754 Circular vision panel in Block board construction flush door

0755 Decorative type louvers in Block board construction flush door

0757 Rebate cutting in block board construction flush door

0759 Decorative plywood 4 mm

0763 Glue
0834 Synthetic enamel paint in all shades except black or chocolate shade

0869 Plaster of Paris

1003 Mild steel round bar above 12 mm dia

1008 Flats up to 10 mm in thickness

1015 Mild steel expanded metal 20x60 mm strands 3.25 mm wide
1.60 mm thick
1021 Hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75
kg/sqm

1022 Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots

1189 Second class teak wood in scantling

1190 Second class teak wood in planks
1199 Sal wood in scantling
1200 Kiln seasoned selected sheesham wood planks
1211 G.I. plain washer for seam bolts
1231 Extra for selected planks of second class teakwood
1238 Extra for selected planks of first class teakwood
2204 Carriage of Timber
2205 Carriage of Steel
2206 Carriage of Stone aggregate 40 mm nominal size and above
2207 Carriage of Brick tiles
2406 Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm)

2407 Float glass panes of nominal thickness 5 mm (weight not less than 12.50
kg/sqm)

2412 Ply wood 5 ply with commercial ply on both faces 6 mm thick
2413 12 mm commercial ply
2414 18 mm thick block board with commercial ply veneering on both side

2449 Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm with
screws, bolts, nuts and washers complete

2451 Brass cupboard lock 6 levers of approved quality, 40 mm size

2452 Brass cupboard lock 6 levers of approved quality, 50 mm size
2453 Brass cupboard lock 6 levers of approved quality, 65 mm size
2454 Brass cupboard lock 6 levers of approved quality, 75 mm size
2455 Brass hanging type door stopper 150 mm
2456 Hydraulic door closer bottle type M.S. body with necessary accessories and
screws complete

2459 Anodised Aluminium hanging type door stopper

2464 Anodised Aluminium pull bolt lock (locking bolt) of size 85 mm x 42 mm with
screws, bolts, nuts and washers complete

2465 Anodised Aluminium Casement stay 250 mm

2466 Hollock wood in scantling

2468 Nickled Chromium Brass cupboard lock 40 mm size
2469 Nickled Chromium Brass cupboard lock 50 mm size
2470 Nickled Chromium Brass cupboard lock 65 mm size
2471 Nickled Chromium Brass cupboard lock 75 mm size
2480 Ply wood 5 ply with teak ply on both faces 9 mm thick
2481 Ply wood 5 ply with teak ply on one face and commercial ply on another face 9
mm thick

2483 Ply wood 7 ply with teak ply on one face and commercial ply on another face 9
mm thick

2484 Pre-laminated with decorative lamination on both side exterior Grade-I MDF
Board 12 mm thick confirming to IS:14587

2485 Pre-laminated with decorative lamination on both side exterior Grade-I MDF
Board 18 mm thick confirming to IS:14587

2486 Pre-laminated with decorative lamination one side and other side balancing
lamination exterior Grade-I MDF Board 25 mm thick confirming to IS: 14587

2487 Pre-laminated with decorative lamination one side and other side balancing
lamination exterior Grade-I MDF Board 12 mm thick confirming to IS:14587

2488 Pre-laminated with decorative lamination one side and other side balancing
lamination exterior Grade-I MDF Board 18 mm thick confirming to IS:14587

2489 PVC edge bending tape 2.00 mm thick

2495 18mm thick both sides Pre-laminated cement bonded wood particle board as per
IS : 15786:2008

2496 6mm thick both sides Pre-laminated cement bonded wood particle board as per
IS : 15786:2008

2497 19mm thick prelaminated ply

2498 19mm thick both side balancing lamination factory pressed BWP grade marine
ply as per IS 710

2504 Kiln seasoning of timber

2505 Hollock wood in planks
2640 Glass panes of required thickness having 120 minutes of fire resis- tance both
integrity and radiation control (EI 120) and minimum 20 minutes of insulation (EI
20)

2641 G.I U beading of 1.6 mm thick G.I sheet with ceramic tape.
2642 Ceramic tape 5 x20 mm size
3991 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for small series casement
window/door frame, sash, mullion & small series sliding window frame
.C. WORK)
Unit Rate

day 714.00

day 714.00
day 784.00
day 714.00
day 784.00
day 714.00
day 645.00
day 784.00
day 714.00
day 784.00
day 714.00
day 784.00
day 714.00
day 749.00

sqm 534.00

sqm 773.00

sqm 220.00

sqm 215.00

score 400.00

sqm 288.00

sqm 230.00

sqm 155.00

sqm 500.00
10 Nos 775.00
10 Nos 625.00
10 Nos 380.00
10 Nos 155.00
10 Nos 1309.00
10 Nos 997.00
10 Nos 838.00

10 Nos 2610.00

10 Nos 2300.00
10 Nos 2090.00
10 Nos 1870.00
each 257.00
each 205.00
each 154.00
each 103.00
each 144.00
each 133.00
each 103.00
each 185.00
each 175.00

each 400.00

each 310.00
each 45.00

each 126.00

each 100.00

each 95.00

10 Nos 740.00
10 Nos 670.00
10 Nos 575.00
each 610.00
each 36.00
100 Nos 220.00
100 Nos 170.00
100 Nos 140.00
100 Nos 100.00
100 Nos 95.00
10 Nos. 255.00
10 Nos 455.00
10 Nos 640.00
each 160.00
each 140.00
 each 125.00

each 470.00

each 90.00

each 140.00

each 120.00

each 100.00

each 500.00
each 80.00
100 Nos 300.00
100 Nos 290.00
100 Nos 240.00
100 Nos 180.00
100 Nos 160.00
metre 185.00
metre 260.00
metre 340.00

10 Nos 135.00

10 Nos 80.00

10 Nos 56.00

10 Nos 49.00

metre 39.00

100 Nos 75.00

100 Nos 60.00
100 Nos 45.00
100 Nos 40.00
100 Nos 35.00

each 5.00

10 Nos 125.00
10 Nos 90.00
10 Nos 65.00
10 Nos 55.00
 10 Nos 335.00
10 Nos 300.00
10 Nos 235.00
10 Nos 200.00
each 140.00
each 120.00
each 100.00
each 160.00
each 140.00
each 120.00
metre 40.00
each 90.00
each 80.00
each 49.00
each 39.00
each 43.00
each 34.00
each 29.00
each 20.00
each 20.00
each 15.00
each 12.00
10 Nos 128.00
10 Nos 108.00
10 Nos 79.00
100 Nos 76.00
100 Nos 62.00
100 Nos 49.00
100 Nos 36.00
100 Nos 32.00
10 Nos 560.00
10 Nos 393.00
10 Nos 393.00
10 Nos 270.00
10 Nos 324.00
10 Nos 275.00
10 Nos 226.00

10 Nos 196.00
each 147.00
 each 128.00
10 Nos 580.00
10 Nos 481.00
10 Nos 383.00
10 Nos 304.00
10 Nos 226.00
10 Nos 324.00
10 Nos 275.00
10 Nos 231.00
each 142.00

sqm 1800.00

sqm 1600.00

sqm 1400.00

sqm 1000.00

sqm 900.00

sqm 890.00

sqm of door
area 300.00

sqm of door
area 130.00

sqm of door
area 135.00

sqm of door
area 265.00

sqm of door
area 70.00

sqm 320.00
kg 75.00

litre 165.00

kg 5.00
quintal 4750.00

quintal 4850.00

sqm 280.00
 sqm 430.00

10 Nos 38.00

10 cudm 776.00
10 cudm 791.00
10 cudm 600.00
10 cudm 650.00
100 Nos 32.00
10 cudm 150.00
10 cudm 150.00
cum 187.35
tonne 145.72
cum 178.19
1000 Nos 262.29

sqm 309.00

sqm 515.00

sqm 306.00
sqm 510.00

sqm 775.00

each 62.00

each 57.00
each 88.00
each 93.00
each 108.00
each 77.00

each 686.00

each 20.00

each 48.00

each 33.00

10 cudm 357.00
each 63.00
each 73.00
each 99.00
 each 125.00
sqm 884.00

sqm 905.00

sqm 1010.00

sqm 469.00

sqm 609.00

sqm 877.00

sqm 439.00

sqm 582.00
metre 21.00

sqm 650.00

sqm 455.60

sqm 1500.00

sqm 1450.00

cum 772.00
10 cudm 402.00

sqm 25500.00
metre 250.00
metre 400.00

metre 70.00
3992 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series
casement window/door frame, sash, mullion, big & small series sliding window
frame
3993 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series casement door
sash

3994 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series sliding
window / door sash

3995 G.I fasteners 100 x 8 mm

Brass 100mm mortice latch and lock with 6 levers without pair of handles
0004 Production cost of concrete by batch mix plant

7003 Pair of Anodised Aluminium lever handles for 100 mm mortice latch and lock

7009 12.5 mm thick tapered edge plain gypsum plaster borad confirming to IS 2095
(Part 1):2011

7018 Joint tape roll

7019 Dash fastener / Chemical fastener
7020 All drive screws (for gypsum board)
7021 Primer (for gypsum board)
7023 Chromium plated brackets (curtain rods)
7029 Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of
wire 0.63 mm

7032 Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10
kg/sqm)

7033 Nickel plated M.S. pipe 25 mm dia

7034 Nickel plated M.S. pipe 20 mm dia
7035 Nickel plated M.S. Brackets for curtain rod 20 mm
7036 Nickel plated M.S - Brackets for curtain rod 25 mm
7040 Oxidised mild steel screws 35 mm
7042 Mild steel conduit pipe (heavy type) ISI marked-20 mm dia
7043 Mild steel conduit pipe (heavy type) ISI marked-25 mm dia
7048 Rawl plug 50 mm (designation 10 nos)
7049 Teak wood lipping of size 25x3 mm in pelmets
7055 Flat pressed 3 layer and graded particle board (medium density) Grade 1
conforming to IS : 3087 - 18 mm thick

7059 Aluminium hanging floor door stopper with twin rubber & stopper
7060 Hydraulic door closer tubular type Aluminium section body
7063 Oxidised M.S.casement stay (straight peg type) 300 mm not less than 0.20 kg

7064 Oxidised M.S.casement stay (straight peg type) 250 mm not less than 0.15 kg

7065 Oxidised M.S. casement stay (straight peg type) 200 mm not less
than 0.12 kg
7137 Factory made 35 mm thick shutters with laminated veneer lumber styles & rails
as per TADS 15:1995 and panels of 12 mm thick plain type-I, medium density
flat pressed three layer, graded par- ticle board (FPT-I) as per IS:3087 bonded
with BWP type synthetic resin adhesive, as per IS:848

7139 Factory made 35 mm thick shutters with laminated veneer lumber styles & rails
as per TADS 15:1995 and panels of 12 mm thick both sides prelaminated type-I,
medium density flat pressed three layer, graded particle board (FPT-I) as per
IS:3087 bonded with BWP type synthetic resin adhesive, as per IS:848

7143 Factory made 35 mm thick shutters with laminated veneer lumber styles & rails
as per TADS 15:1995 and panels of 12 mm thick one side prelaminated type-I,
and other side balancing lamination, me- dium density flat pressed three layer,
graded particle board (FPT-I) as per IS:3087 bonded with BWP type synthetic
resin adhesive, as per IS:848

7151 Factory made 30 mm thick shutters with laminated veneer lumber styles & rails
as per TADS 15:1995 and panels of sheet glass using 10 kg/ sqm glass panes

7154 Factory made 35 mm thick shutters with laminated veneer lumber styles & rails
as per TADS 15:1995 and panels of galvanised wire gauge with average width
of aperture 1.4 mm in both directions with wire of dia 0.63 mm

7155 Factory made 30 mm thick shutters with laminated veneer lumber styles & rails
as per TADS 15:1995 and panels of galvanised wire gauge with average width
of aperture 1.4 mm in both directions with wire of dia 0.63 mm

7157 Laminated veneer lumber confirming to TADS 15:1995 manufactured

in factory in frames of doors, windows
7184 Oxidised M.S. safety chain (weighing not less than 450 gms) for door

7269 25 mm thick particle board

7271 Second class teak wood lipping 25 mm wide x 12 mm thick
7272 25 mm thick melamine faced prelaminated three layer particle board

7307 For flush door shutters Extra for providing teak veneering on one side instead of
commercial veneering

7312 Expandable fastener with plastic sleeve and M.S. screws : 25 mm long

7313 Expandable fastener with plastic sleeve and M.S. screws : 32 mm long

7314 Expandable fastener with plastic sleeve and M.S. screws : 40 mm long
7315 Expandable fastener with plastic sleeve and M.S. screws.
50 mm long
7349 12 mm M.S. 'U' beading
7366 Glass reinforced Gypsum ( GRG) plaster board 12.5 mm thick confirming to IS
2095 (Part 3):1996

7367 Galvanised M.S. sheet 0.5 mm thick pressed channel section of size 50x32 mm

7369 Galvanised M.S. sheet 0.50 mm thick pressed stud : 48x34x36 mm

7388 Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt
7390 EPDM Gasket for uPVC window/door
7443 Aluminium single cleat of size 30x32x3 mm
7444 Aluminium grip strip of size 50x12x2 mm
7445 25 mm thick prelaminated flush door shutter both side decorative
7449 Aluminium U beading
7451 Glass sheet (Pin headed) 4 mm thick
7468 Veneered particle board with commercial veneering on both sides 12 mm thick

7477 Prelaminated particle board with one side decorative and other side balancing
lamination, flat pressed 3 layer & graded (medium density) Grade i, Type II
conforming to IS : 12823 (exterior grade) 12 mm thick

7478 Prelaminated particle board with one side decorative and other side balancing
lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II
conforming to IS : 12823 (exterior grade) 18 mm thick

7479 Prelaminated particle board with one side decorative and other side balancing
lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II
conforming to IS : 12823 (exterior grade) 25 mm thick

7480 Prelaminated particle board with both sides decorative lamination, flat pressed 3
layer & graded (medium density) Grade I, Type II conforming to IS : 12823
(exterior grade) 12 mm thick sqm 490.00

7485 Oxidised M. S. hinges finished with nickel plating 50 mm (Over all width)

7486 Oxidised M. S. hinges finished with nickel plating 65 mm (Over all width)

7512 PTMT handle 125x34x24 mm

7513 PTMT handle 150x34x24 mm
7514 PTMT butt hinges 75x60x10 mm
7515 PTMT butt hinges 100x75x10 mm
7516 PTMT Tower bolt 152x42x18 mm
 metre 75.00

metre 100.00

metre 90.00

each 15.00

each 195.00

each 215.00

sqm 140.00

roll 90.00
each 12.50
100 Nos 58.00
litre 70.00
each 8.00

sqm 250.00

sqm 420.00

metre 76.00
metre 72.00
each 7.00
each 8.00
100 Nos 48.00
metre 42.00
metre 54.00
each 22.00
metre 12.00

sqm 430.00

each 40.00
each 560.00

each 35.00

each 30.00

each 25.00
 sqm 1620.00

sqm 1720.00

sqm 1910.00

sqm 1620.00

sqm 1620.00

sqm 1430.00

10 cudm 700.00

each 57.00

sqm 435.00
metre 28.00

sqm 900.00

sqm 305.00

each 10.00

each 10.00

each 13.00
each 14.00

metre 14.00

sqm 240.00

metre 60.00

metre 70.00
each 10.00
metre 15.00
each 14.00
each 11.00
sqm 800.00
kg 210.00
sqm 345.00

sqm 480.00

sqm 500.00

sqm 560.00

sqm 850.00

metre 40.00

metre 52.00

each 20.00
each 20.00
each 29.00
each 36.00
each 35.00
7517 PTMT Tower bolt 202x42x18 mm

7518 PTMT door catcher 72x42 mm

7552 Coir veneered board 4 mm thick
7553 Coir veneered board 6 mm thick
Coir veneered board 12 mm thick
0004 Production cost of concrete by batch mix plant

7556 Coir veneered board 18 mm thick

8001 24 mm thick Factory made shutters with style, rails and panels of PVC extruded
sections in white, grey or wooden finish

8002 30 mm thick Factory made shutters with style, rails and panels of PVC extruded
sections in white, grey or wooden finish

8003 Factory made PVC rigid foam panelled shutter i/c carriage
8004 Factory made PVC rigid foam panelled shutter as per IS : 4020 i/c carriage

8006 Factory made PVC rigid foam sheet 1 mm thick

8010 48mmX40mmX1.5mm thick Factory made door frame of PVC extruded sections
in white, grey or wooden finish

8011 Factory made door frame PVC extruded sheet i/c carriage
8014 Factory made door frame of size 50x47 mm with wall thickness 5 mm made of
single piece extruded profile

8016 High Density expanded poly ethylene (EPE) Foam 1mm thick
8017 Fire rated door frame made with 1.6 mm thick G.I sheet (120 minutes fire rating)

8018 Fire rated door shutter made with 1.6 mm thick G.I sheet (120 minutes fire
rating) including hinges ( without glass panels)

8100 Powder coated M.S. butt hinges 100 mm X58 mmX1.9 mm

8101 SS ball bearing of size 100 x89x3mm
8116 Zinc alloy (white powder coated) 3D Hinges for uPVC door
8117 Zinc alloy (white powder coated) handles with zinc plated mild steel multi point
locking having transmission gear, cylinder with keeps and one side key for uPVC
casement door

8118 Zinc alloy (white powder coated) handles along with zinc plated mild steel multi
point locking having transmission gear with keeps for uPVC sliding window

8119 Zinc alloy (white powder coated) handles with key along with zinc plated mild
steel multi point locking having transmission gear with keeps for uPVC sliding
door

8121 uPVC extruded (small series) casement window frame size 47x50mm

8122 uPVC extruded (small series) casement window sash/window mullion size 47x68
mm
 each 58.00

each 22.00
sqm 260.00
sqm 350.00
sqm 625.00
sqm 930.00

sqm 1085.93

sqm 1248.82

sqm 1547.45

sqm 1547.45

sqm 155.80

metre 130.00

metre 260.00

metre 298.74

sqm 10.00

metre 1200.00

sqm 6000.00

10 Nos 130.00
each 450.00
each 455.00

each set 2635.00

each set 1535.00

each set 1265.00

metre 280.00

metre 311.00
8125 uPVC extruded glazing bead of appropriate dimension for small
series casement window Sash
8126 uPVC extruded (big series) casement window frame size 67x60 mm

8127 uPVC extruded (big series) casement door frame size 67x64 mm

8128 uPVC extruded (big series) casement window sash/window mullion/door mullion
size 67x80 mm

uPVC extruded (big series) casement door sash size 67x110 mm

0004 Production cost of concrete by batch mix plant

8130 uPVC extruded glazing bead of appropriate dimension for big series casement
window/door sash

8131 uPVC extruded glazing bead of appropriate dimension for small series sliding
window sash

8132 uPVC extruded glazing bead of appropriate dimension for big series of sliding
window/ door sash

8133 uPVC extruded (small series) 2 track sliding window frame size 52x44 mm

8134 uPVC extruded (big series) 2 track sliding window/door frame size 67x50mm

8135 uPVC extruded (small series) 3 track sliding window frame size 92x44 mm

8136 uPVC extruded (big series) 3 track sliding window/door frame size 116x45mm

8137 uPVC extruded (small series) 2 track sliding window sash/3 track sliding window
sash size 32x60mm

8138 uPVC extruded (big series) 2 track sliding window sash size 46x62mm

8139 uPVC extruded (big series) 3 track sliding window sash size 46x62mm

8140 uPVC extruded interlock of appropriate dimension for small series sliding
window sash

8141 uPVC extruded interlock of appropriate dimension for big series sliding window/
door sash

8142 uPVC extruded inline adaptor of appropriate dimension for big series sliding
window/door sash

8143 uPVC extruded 2 track sliding door sash/ 3 track sliding door sash (big series)
size 46x82mm

8210 Stainless steel screws 50 mm

8211 Stainless steel screws 40 mm
8212 Stainless steel screws 30 mm
8214 Stainless steel screws 20 mm
8215 Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked
8216 Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked
8217 Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked
8218 Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked
8219 Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS :12817 marked

8220 Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS :12817 marked

8221 Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS :12817 marked

8222 M.S. heavy weight butt hinges 125x90x4.0 mm IS: 1341 marked.
8223 M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked
8224 M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked
8225 M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 marked
8227 Stainless steel fancy handle
8228 Soft closing stainless steel hinges
8229 Stainless steel telescopic drawer channels 500mm long
8230 Stainless steel (Grade-304) basket (readymade)
8647 Stainless steel screws 30 mm x4 mm
8678 1 mm thick 35 mm wide bright finished stainless steel piano hinges

8699 8 mm thick tapered edge calcium silicate board

8700 10 mm thick calcium silicate board
8703 Telescopic drawer channels 300 mm long
8704 Stainless steel roller for sliding arrangement in racks/ cupboards/ cabinets
shutter

8705 50 mmX42 mmX2 mm thick Factory made door frame of PVC extruded sections
in white, grey or wooden finish

8706 25 mm thick factory made PVC flush door shutter i/c carriage
8707 Factory made glass reinforced plastic door frame 90x45 mm i/c carriage

8708 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c
carriage

8709 30 mm thick factory made solid PVC profile panelled door single piece extruded
profile decorative finish (wood grain printed on both side)

8710 Factory made solid PVC door frame 60 x 30 mm i/c carriage

8711 20 mm factory made solid PVC panel door shutter i/c carriage
8712 30 mm thick factory made solid PVC profile panelled door single piece extruded
profile non decorative finish

8713 Fiber glass reinforced plastic chajja

 metre 100.00

metre 351.00

metre 396.00

metre 469.00

metre 568.00

metre 135.00

metre 66.00

metre 85.00

metre 314.00

metre 424.00

metre 418.00

metre 583.00

metre 291.00

metre 357.00

metre 358.00

metre 88.00

metre 98.00

metre 98.00

metre 385.00

100 Nos 300.00

100 Nos 250.00
100 Nos 230.00
100 Nos 150.00
10 Nos 310.00
10 Nos 280.00
 10 Nos 180.00
10 Nos 150.00

10 Nos 375.00

10 Nos 275.00

10 Nos 230.00

10 Nos 230.00
10 Nos 180.00
10 Nos 110.00
10 Nos 90.00
10 Nos 1000.00
10 Sets 1550.00
set 535.00
kg 260.00
100 Nos 35.84

metre 47.04

sqm 270.00
sqm 420.00
set 240.00

each 11.00

metre 166.00

sqm 1700.00

metre 480.00

sqm 2326.00

sqm 2100.00
metre 315.00
sqm 2050.00

sqm 2000.00

sqm 3000.00
8714 Magnetic catcher triple strip vertical type

8715 Magnetic catcher double strip horizontal type

8716 100 mm mortice lock with 6 levers for aluminium door
8719 2nd class teak wood moulded beading or Taj beading/ornamental bleading of
size 18X5 mm

Ceiling sections 0.55 mm thick having a knurled web of 51.55 mm and two
0004 Production cost of concrete by batch mix plant

flanges of 26 mm each with lips of 10.55 mm

8721 Perimeter channel having one flange of 20 mm and another flange of 30 mm

with thickness of 0.55 mm and web of length 27 mm

8722 Nylon sleeves & wooden screws (40 mm)

8723 Counter sunk ribbed head screw 25 mm
8724 12 mm thick marine plywood conforming to IS: 710
8725 12 mm thick fire retardant plywood conforming to IS: 5509
8726 1.5 mm thick decorative laminated sheet
8727 1.0 mm thick decorative laminated sheet
8730 30 mm thick factory made glass fiber reinforced plastic flush door shutter i/c
carriage

8734 P.V.C. Single piece extruded door frame of profile size 50 mm x 47mm with wall
thickness of 5 mm

8735 35 mm thick factory made solid panel PVC door shutter of single piece extruded
profile non decorative finished (Matt finished)

8736 35 mm thick factory made solid panel PVC door shutter of single piece extruded
profile decorative finished (wood grain finished)

8737 Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50mm dia wire

8738 Factory made door frame fire rated (60 minutes) made with
16 SWG G.I. Sheet of section 143 mm x 57 mm duly filled with vermuculite
based concrete mix

8739 Fire rated door shuttere made with 16 SWG G.I. sheet (60 minutes) without
panel

8740 Fire seal Putty

8741 Clear fire resistant glass panes 6mm thick (60 minutes)
8742 G.I. U beading of 16 SWG G.I. sheet (zinc coating >120gm/ m²) with ceramic
tape of suitable thickness and fire resistant primer coating

8743 Matrix Mineral Board

8744 Panic Bar / latch (Double point)
8745 65 mm x 55 mm x 2 mm thick Factory made door frame of PVC extruded section
in white, grey or wooden finish

8746 37 mm thick Factory made shutter with style,rails and panels of PVC extruded
section in white or grey finish i/c carriage
8747 75 mm x 53 mm x 2.0 mm thick Factory made door frame of PVC extruded
section in white, grey or wooden finish

8748 37 mm thick Factory made fusion welded shutter with style, rails and panels of
PVC extruded section in wooden finish

8749 Zinc alloy (white powder coated) touch lock with hook for wire mesh shutter

8750 Zinc alloy (white powder coated) casement handle for uPVC window/door

8751 Zinc alloy (white powder coated) touch lock withhook for uPVC window/door

8752 Zinc alloy body with single nylon roller (weight bearing capacity to be 40 Kg) for
uPVC sliding window

8753 Stainless Steel (SS - 304) with adjustable double nylon roller (weight bearing
capacity to be 120 Kg) for uPVC sliding door/window

8754 Zinc alloy (white powder coated) cresent lock for uPVC sliding door/window

8755 Stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for uPVC windows

8756 Stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for uPVC windows

8757 Stainless steel friction hinges (SS-304 grade) size 300 x 19 x

1.9 mm for uPVC window

8758 Stainless steel friction hinges (SS-304 grade) size 350 x 19 x

1.9 mm for uPVC window

8759 Stainless steel friction hinges (SS-304 grade) size 400 x 19 x

1.9 mm for uPVC window

8760 Glass panes of required thickness having 60 minutes of fire resis- tance both
integrity and radiation control (EI 60) and minimum 20 minutes of insulation (EI
20)

8772 Aluminium Track on bottom rail for uPVC window

8773 Wool pile/ weather pile strip for uPVC sliding window
8774 Aluminium Grill as per IS 1868
8775 Steel Galvanised tubular reinforcement for uPVC door/ window
8776 Stainless steel dash fastener of 8 mm dia and 75 mm long bolt
8777 GI Fastener 100x8 mm
9977 Carriage
9988 Carriage and sundries
9999 Sundries
 each 28.00

each 20.00
each 432.00

metre 30.00

metre 38.00

metre 23.00

each 2.60
100 Nos 76.00
sqm 720.00
sqm 867.00
sqm 380.00
sqm 294.00

sqm 2675.00

metre 265.00

sqm 2295.00

sqm 2707.00

sqm 413.00

metre 1062.00

sqm 4702.00

kg 304.00
sqm 21500.00

metre 303.00
metre 70.00
each 5200.00

metre 364.00

sqm 2479.00
metre 413.00

sqm 2703.00

each 133.00

each 130.00

each 114.00

each 60.00

each 105.00

each 110.00

each 212.00

each 237.00

each 260.00

each 361.00

each 365.00

sqm 22500.00
metre 37.00
metre 20.00
kg 279.00
metre 62.00
each 17.00
each 15.00
L.S. 2.12
L.S. 2.12
L.S. 2.12
 9.0 WOOD AND P. V. C. WORK
Code Description
No.
FRAMES AND TRUSSES

Providing wood work in frames of doors, windows, clerestory windows

0004 Production cost of concrete by batch mix plant

and other frames, wrought framed and fixed in position with hold fast
lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately).
9.1.1 Second class teak wood
9.1.2 Sal wood
9.1.3 Kiln seasoned and chemically treated hollock wood
9.2 Providing laminated veneer lumber conforming to IS:14616 and TAD -15:
2001 (Part B) in factory made frames of doors, windows, clerestory
windows and other frames, wrought framed and fixing in position with
hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately).
9.3 Providing wood work in frames of false ceiling, partitions etc. sawn and
fixed in position with necessary stainless steel screws etc.
9.3.1 Sal wood
9.3.2 Kiln seasoned and chemically treated hollock wood
9.4 Extra for additional labour for circular works, such as in frames of fan
light
9.4.1 Second class teak wood
9.4.2 Sal wood
9.4.3 Kiln seasoned and chemically treated hollock wood
9.5 Providing and fixing panelled or panelled and glazed shutters for doors,
windows and clerestory windows, fixing with butt hinges of required
size with necessary screws, excluding panelling which will be paid for
separately, all complete as per direction of Engineer-in-charge. (Note:-
Butt hinges and necessary screws shall be paid separately)
9.5.1 Second class teak wood
9.5.1.1 35 mm thick shutters
9.5.1.2 30 mm thick shutters
9.5.2 Kiln seasoned and chemically treated hollock wood
9.5.2.1 35 mm thick shutters
9.5.2.2 30 mm thick shutters
9.5.3 Kiln seasoned selected planks of sheesham wood
9.5.3.1 35 mm thick shutters
9.5.3.2 30 mm thick shutters
Unit Rate

cum 131576.95
cum 106720.85
cum 74199.70

cum 115052.20

cum 97078.35
cum 64332.20

cum 13157.80
cum 10672.20
cum 7420.30

sqm 3704.45
sqm 3360.70

sqm 2511.95
sqm 2333.50

sqm 3259.05
sqm 2976.40
9.6 Providing and fixing 35 mm thick factory made laminated veneer lumber
door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing
with butt hinges of required size with necessary screws, all complete
as per directions of Engineer- in-charge and panelling with panels of :
0004 Production cost of concrete by batch mix plant
9.6.1 12 mm thick plain grade -1, medium density flat pressed three layer
particle board FPT - I or graded wood particle board FPT- I, IS : 3087 marked,
bonded with BWP type synthetic resin adhesive as per IS : 848 :

9.6.2 12 mm thick pre-laminated particle board (decorative lamination on

both sides) grade -1, medium density flat pressed, three layer particle board
FPT- I or graded wood particle board FPT- I, conforming to IS : 3087, bonded
with BWP type synthetic resin adhesive as per IS : 848 and pre- laminated
conforming to IS : 12823, Grade 1, Type - II marked :

9.6.3 12 mm thick one side Pre-laminated particle board (decorative

lamination on one side and other sides balancing lamination) grade -1, medium
density flat pressed, three layer particle board FPT - I or graded wood particle
board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin
adhesive as per IS : 848 and pre-laminated conforming to IS : 12823, Grade -1,
Type II marked :

9.7 Providing and fixing panelling or panelling and glazing in panelled or

panelled and glazed shutters for doors, windows and clerestory windows
(Area of opening for panel inserts excluding portion inside grooves or
rebates to be measured). Panelling for panelled or panelled and glazed
shutters 25 mm to 40 mm thick :
9.7.1 Second class teak wood
9.7.2 Kiln seasoned and chemically treated hollock wood
9.7.3 Ply wood 5 ply, 9 mm thick
9.7.3.1 Decorative plywood both side decorative veneer (Type - I)
conforming to IS 1328 BWR type

9.7.3.2 Decorative plywood one side decorative veneer and

commercial veneer on other face (Type 1) conforming to IS 1328 BWR
Type

9.7.4 Ply wood 7 ply, 9 mm thick

9.7.4.1 Decorative plywood one side decorative veneer and
commercial veneer on other face (Type 1) conforming to IS 1328 BWR
Type

9.7.5 Particle Board 12 mm thick

9.7.5.1 Plain particle board flat pressed, 3 layer or graded wood
particle board medium density Grade I, IS : 3087 marked
9.7.5.2 Veneered flat pressed three layer or graded wood
particle board with commercial veneering on both sides conforming to
IS:3097, grade I

9.7.5.3 Pre-laminated particle board with decorative lamination

on one side and balancing lamination on other side, Grade I, Type II IS:
12823 marked

9.7.5.4 Pre-laminated particle board with decorative

lamination on both sides, Grade I, Type II, IS:12823 marked
sqm 2682.05

sqm 2815.85

sqm 3070.05

sqm 2998.30
sqm 2039.80

sqm 2366.35

sqm 2400.40

sqm 2570.70

sqm 1399.80
sqm 1711.15

sqm 1743.60

sqm 1727.40
 9.7.6 Coir Veneer Board (conforming to IS 14842)
9.7.6.1 12 mm thick sqm 1946.30
9.7.7 Float glass panes

9.7.7.1 4 mm thick glass pane (weight not less than

10kg/sqm).
9.7.7.2 5.0 mm thick glass panes (weight not less than 12.50
kg/sqm).

9.7.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire
and 1.4mm wide aperture with matching wood beading

0004 Production cost of concrete by batch mix plant

windows using 4 mm thick float glass panes, including ISI marked M.S.
pressed butt hinges bright finished of required size with necessary
screws.
9.9.1 Second class teak wood
9.9.1.1 35 mm thick
9.9.1.2 30 mm thick
9.9.2 Kiln seasoned and chemically treated hollock wood
9.9.2.1 35 mm thick
9.9.2.2 30 mm thick
9.9.3 Kiln seasoned selected planks of sheesham wood
9.9.3.1 35 mm thick
9.9.3.2 30 mm thick
9.10 Providing and fixing factory made laminated veneer lumber glazed shutter
conforming to IS: 14616 and TADS 15:2001 (Part B), using 4 mm thick
float glass panes for doors, windows and clerestory windows, fixing
with butt hinges of required size with necessary screws, all as per
directions of Engineer-in-charge (Note:- Butt hinges and necessary
screws shall be paid separately)
9.10.1 30 mm thick shutters
1946.30

sqm 1897.10

sqm 2231.20

sqm 1521.60

sqm 4458.40
sqm 4065.50

sqm 3100.55
sqm 2896.60

sqm 3951.85
sqm 3628.80

sqm 2682.05
9.11 Extra for providing heavy sheet float glass panes instead of ordinary
float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding po
inside rebate shall be measured)
9.11.1 5.0 mm thick instead of 4 mm thick. sqm 275.60

9.12 Extra for providing frosted glass panes 4 mm thick instead of ordinary
float glass panes 4 mm thick in doors, windows and clerestory window
shutters. (Area of opening for glass panes excluding portion inside rebate shall
be measured).
0004 Production cost of concrete by batch mix plant
glass panes weighing 4 mm thick in doors, windows and clerestory
windows shutters (Area of opening for glass panes excluding portion inside
rebate shall be measured).
9.14 Extra for providing ISI marked Stainless Steel butt hinges instead of
M.S. pressed butt hinges bright finished of required size with necessary screws.
(Shutter area to be measured).
9.15 Deduct for not providing hinges in doors, windows or clerestory window
shutters with :
9.15.1 Stainless steel butt hinges with stainless steel screws :
9.15.1.1 For 2nd class teak wood and other class of wood shutters

9.15.2 ISI marked M.S. pressed butt hinges bright finished of required
size.
9.15.2.1 For 2nd class teak wood and other class of wood
shutters sqm 55.40
9.16 Providing and fixing 25 mm thick shutters for cup board etc. :
9.16.1 Panelled or panelled & glazed shutters :

9.16.1.1 Second class teak wood including ISI marked

anodised aluminium butt hinges with necessary
screws
9.16.1.2 Second class teak wood including iSi marked
nickel plated bright finished M.S. piano hinges with necessary screws

Glazed shutters :
9.16.2.1 Second class teak wood including ISI marked anodized
aluminium butt hinges with necessary screws

9.16.2.2 Second class teak wood including ISI marked nickel plated
bright finished M.S. piano hinges
with necessary screws

9.16.2
ening for glass panes excluding portion

275.60

sqm 148.50

sqm 48.15

sqm 147.15

sqm 202.55

sqm 3918.85

sqm 4061.20

sqm 3751.10

sqm 3791.20
9.17 Providing and fixing flat pressed 3 layer particle board medium density
exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing
or studding with screws etc. complete (Frames, backing or studding to be paid
separately):
9.17.1 12 mm thick
9.17.2 18 mm thick
9.18 Providing and fixing Pre-laminated flat pressed 3 layer (medium density)
0004 Production cost of concrete by batch mix plant
side decorative and other side balancing lamination Grade I, Type II
exterior grade IS : 12823 marked, in shelves with screws and fittings
wherever required, edges to be painted with polyurethane primer (fittings
to be paid separately).
9.18.1 18 mm thick
9.18.2 25 mm thick
9.20 Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) decorative type, core of block board construction with
frame of 1st class hard wood and well matched teak 3 ply veneering
with vertical grains or cross bands and face veneers on both faces of
shutters.
9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws

9.20.2 30 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws

9.20.3 25 mm thick (for cupboard) including ISI marked nickel plated bright
finished M.S. Piano hinges IS : 3818 marked with necessary screws

9.21 Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) non-decorative type, core of block board construction with
frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both
faces of shutters:
9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws

9.21.2 30 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws

9.21.3 25 mm thick (for cupboard) including ISI marked nickel plated bright
finished M.S. piano hinges with necessary screws

9.22 Extra for Providing and fixing flush doors with decorative veneering instead
of non decorative ISI marked flush door shutters conforming to IS: 2202
(Part I)
9.22.1 On one side only
9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm
minimum depth on all edges of flush door shutters (over all area of door shutter to
be measured).
 9.24 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush
doors (cost of glass excluded) (overall area of door shutter to be
measured):
9.24.1 Rectangular or square
9.24.2 Circular
9.25 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters
(overall area of door shutters to be measured).
9.25.1 Decorative type door
9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be
measured).

9.27 Providing and fixing wire gauge shutters using galvanized M.S. wire
gauge of average width of aperture 1.4 mm in both directions with wire
of dia 0.63 mm, for doors, windows and clerestory windows with hinges
and necessary screws :
9.27.1 35 mm thick shutters
sqm 667.10
sqm 869.10

sqm 1089.30
sqm 1501.00

sqm 3086.10

sqm 2818.50

sqm 2512.35

sqm 2015.75

sqm 1881.95

sqm 1830.00

sqm 408.05

sqm 401.40
sqm 173.95
sqm 180.60

sqm 354.55

sqm 93.65
 9.27.1.1 with ISI marked M.S. pressed butt hinges bright
finished of required size
9.27.1.1.1 Second class teak wood
9.27.1.1.2 Kiln seasoned and chemically treated hollock
wood

9.27.1.1.3 Kiln seasoned selected class of sheesham wood

0004 Production cost of concrete by batch mix plant

9.27.1.2.1 Second class teak wood

9.27.1.2.2 Kiln seasoned and chemically treated
hollock wood

9.27.1.2.3 Kiln seasoned selected class of

sheesham wood

9.27.2 30 mm thick shutters

9.27.2.1 with ISI marked M.S. pressed butt hinges bright
finished of required size
9.27.2.1.1 Second class teak wood
9.27.2.1.2 Kiln seasoned and chemically treated hollock
wood

9.27.2.1.3 Kiln seasoned selected class of

sheesham wood
t

sqm 4342.30

sqm 3140.15

sqm 3893.35

sqm 4489.45

sqm 3287.30

sqm 4040.55

sqm 3863.65

sqm 2834.60

sqm 3479.40
 9.27.2.2 With ISI marked stainless steel butt hinges of
required size
9.27.2.2.1 Second class teak wood
9.27.2.2.2 Kiln seasoned and chemically treated hollock
wood

9.27.2.2.3 Kiln seasoned selected class of sheesham wood

Providing and fixing wire gauge laminated veneer lumber shutters

0004 Production cost of concrete by batch mix plant

conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised

wire gauge with average width of aperture 1.4 mm in both directions with wire of
dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, fixing
with butt hinges of required size with necessary screws, as per directions of
Engineer-in-charge: (Note:- Butt hinges and necessary screws shall be paid
separately)

9.31.1 35 mm thick shutters

9.31.2 30 mm thick shutters
MISCELLANEOUS-WOOD WORK

9.40 Providing and fixing wooden moulded beading to door and window frames with
iron screws, plugs and priming coat on unexposed surface etc. complete :

9.40.1 2nd class teak wood

9.40.1.1 50x12 mm
9.40.1.2 50 x 20 mm
9.40.2 Kiln seasoned and chemically treated hollock wood
9.40.2.1 50x12 mm
9.40.2.2 50x20 mm
9.41 Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to
be paid separately), including fixing 50x12 mm beading complete with :

9.41.1 Second class teak wood

9.42 Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or
graded wood particle board medium density grade I, IS : 3087 marked, including
top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade,
nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated
brackets, including fixing with 25x3 mm
M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size
100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm
long etc. all complete.
 sqm 4010.85

sqm 2981.75

sqm 3626.55

sqm 2682.05
sqm 2427.85

metre 191.55
metre 239.20

metre 157.85
metre 183.05

sqm 2622.20

metre 511.55
9.43 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer
board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S.
Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3
mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x
40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.

9.44 Extra for using veneered particle board conforming to IS 3097 Grade I, in item of
pelmet 18mm thick 150mm wide.
9.44.1 Non decorative veneer on both sides
9.44.2 Particle board with decorative veneering on both sides
0004 Production cost of concrete by batch mix plant
9.46 Providing and fixing chromium plated brass curtain rod having wall thickness of
1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC
sleeves etc., wherever necessary complete :

9.46.1 12 mm dia

9.46.2 20 mm dia
9.46.3 25 mm dia
9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

9.47.1 20 mm dia (heavy type)

9.47.2 25 mm dia (heavy type)
9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel primer all
complete.

9.48.1 Fixed to steel windows by welding

9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc.
9.49 Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6mm
thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat
with approved steel primer all complete.

9.50 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less
than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak
wood and priming coat with approved steel primer all complete.

9.51 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory
windows using wire gauge with average width of aperture
1.4 mm in both directions with wire of dia 0.63 mm all complete.

9.51.1 With 2nd class teak wood beading 62X19 mm

9.51.2 With 12 mm mild steel U beading
metre 626.55

metre 33.20
metre 107.05
metre 61.50

metre 274.90

metre 375.25
metre 482.30

metre 152.65
metre 159.35

kg 181.00
kg 197.70

sqm 1277.65

sqm 1484.70

sqm 1164.90
sqm 812.40
 9.52 Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not
less than 7.75 Kg per sqm in panelled and glazed door and window shutter
instead of glass sheet 4 mm thick.
9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to
frame with 10 mm diameter bolts, nuts and wooden plugs and embedding
0004 Production cost of concrete by batch mix plant

9.54 Providing beams including hoisting, fixing in position and applying wood
preservative for the unexposed surfaces, etc. complete with :
9.54.1 Sal wood
9.54.2 Hollock wood
BRIGHT FINISHED M.S. FITTINGS
9.55 Providing and fixing ISI marked M.S. pressed butt hinges bright finished
with necessary screws etc. complete :
9.55.1 125x65x2.12 mm
9.55.2 100x58x1.90 mm
9.55.3 75x47x1.70 mm
9.55.4 50x37x1.50 mm
9.56 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges
with necessary screws etc. complete :
9.56.1 125x90x4.00 mm
9.56.2 100x75x3.50 mm
9.56.3 75x60x3.10 mm
9.56.4 50x40x2.50 mm
Note: - In coastal areas, M.S. heavy weight butt hinges or stainless steel hinges
shall be used.

COPER OXIDISED MILD STEEL FITTINGS (COPPER OXIDISED AS PER IS:

1378)

9.57 Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary
screws etc. complete.

9.57.1 125x65x2.12 mm
9.57.2 100x58x1.90 mm
9.57.3 75x47x1.70 mm
9.57.4 50x37x1.50 mm
9.58 Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with
necessary screws etc. complete :

9.58.1 150x125x27x2.80 mm
 sqm 161.90

each 194.35

cum 95406.90
cum 62238.25

ed

each 48.00
each 39.05
each 32.75
each 16.35
nges

each 60.70
each 52.40
each 40.00
each 21.80

each 47.05
each 40.60
each 34.30
each 16.95

each 77.70
 9.58.2 125x125x27x2.80 mm

9.58.3 100x125x27x2.80 mm
9.58.4 75x100x20x2.24 mm
9.59 Providing and fixing ISI marked oxidised M.S. single acting spring hinges
with necessary screws etc. complete :
0004 150 mm
Production cost of
9.59.2 125 mm
concrete by batch
mix9.59.3
plant 100 mm
9.60 Providing and fixing oxidised M.S. double acting spring hinges with
necessary screws etc. complete.
9.60.1 150 mm
9.60.2 125 mm
9.60.3 100 mm
9.61 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel
plating and fixing with necessary screws etc., complete.
9.61.1 Overall width 35 mm
9.61.2 Overall width 50 mm
9.61.3 Overall width 65 mm
9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :
9.62.1 300x16 mm each 180.55
9.62.2 250x16 mm each 165.90

9.63 Providing and fixing ISI marked oxidised M.S. tower bolt black finish,
(Barrel type) with necessary screws etc. complete :
9.63.1 250x10 mm
9.63.2 200x10 mm
9.63.3 150x10 mm
9.63.4 100x10 mm
9.64 Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with nece
screws bolts, nut and washers
etc. complete. each 108.65
9.65 Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930 with screws etc. comp
9.65.1 300x20x6 mm each 82.40
9.65.2 250x20x6 mm each 69.00
 each 73.00

each 64.30
each 56.90
nges

each 251.70
each 224.95
each 196.70

each 278.45
each 251.70
each 223.45
l

metre 282.95
metre 282.95
metre 299.00
nuts and screws etc. complete :
180.55
165.90

each 74.65
each 61.05
each 53.05
each 39.10
k conforming to IS : 7534 with necessary

108.65
g to IS:5930 with screws etc. complete :
82.40
69.00
9.66 Providing and fixing ISI marked oxidised M.S. handles conforming to
IS:4992 with necessary screws etc. complete :
9.66.1 125 mm
9.66.2 100 mm
9.66.3 75 mm
0004 Production cost of concrete by batch mix plant

9.67.1 150 mm
9.67.2 115 mm
9.67.3 90 mm
9.68 Providing and fixing oxidised M.S. casement stays (straight peg type)
with necessary screws etc. complete.
9.68.1 300 mm weighing not less than 200 grams
9.68.2 250 mm weighing not less than 150 grams
9.68.3 200 mm weighing not less than 120 grams
9.69 Providing and fixing oxidised M.S. Safety chain with necessary
fixtures for doors, (weighting not less than 450 gms) each 88.95
STAINLESS STEEL FITTINGS
9.70 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. comple
9.70.1 125x64x1.90 mm each 95.50
9.70.2 100X58X1.90 mm each 86.15
9.70.3 75x47x1.80 mm each 64.20
9.70.4 50x37x1.50 mm each 36.00
9.71 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel scr
complete :
9.71.1 125x64x2.50 mm each 104.20
9.71.2 100x60x2.50 mm each 85.45
9.71.3 75x50x2.50 mm each 70.90
BRASS FITTINGS

9.72 Providing and fixing bright finished brass butt hinges with necessary
screws etc. complete :
9.72.1 125x85x5.5 mm (heavy type)
9.72.2 125x70x4 mm (ordinary type)
9.72.3 100x85x5.5 mm (heavy type)
9.72.4 100x70x4 mm (ordinary type)
 each 35.20
each 28.25
each 24.25

each 29.15
each 26.00
each 22.10

each 59.25
each 51.90
each 45.20

88.95

h stainless steel screws etc. complete :

95.50
86.15
64.20
36.00
avy weight) with stainless steel screws etc.

104.20
85.45
70.90

each 228.90
each 157.45
each 175.70
each 125.90
 9.72.5 75x65x4 mm (heavy type)

9.72.6 75x40x2.5 mm (ordinary type)

9.72.7 50x40x2.5 mm (ordinary type)
9.73 Providing and fixing bright finished brass parliamentary hinges with
necessary screws etc. complete :
0004 150x125x27x5 mm
Production cost of
9.73.2 125x125x27x5 mm
concrete by batch
mix9.73.3
plant 100x125x27x5 mm
9.73.4 75x100x20x3.2 mm
9.74 Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete :
9.74.1 250x10 mm
9.74.2 200x10 mm
9.74.3 150x10 mm
9.74.4 100x10 mm
9.75 Providing and fixing bright finished brass door latch with necessary screws

etc. complete :
9.75.1 300x16x5 mm
9.75.2 250x16x5 mm
9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock
with 6 levers and a pair of lever handles of approved quality with necessary
screws etc. complete.
9.77 Providing and fixing bright finished brass 100 mm mortice latch with one
dead bolt and a pair of lever handles of approved quality with necessary
screws etc. complete.
9.78 Providing and fixing bright finished brass night latch of approved quality
including necessary screws etc. complete.
each 1004.80
9.79 Providing and fixing special quality bright finished brass cupboard or ward robe
locks with four levers of approved quality including necessary screws etc. complete.

9.79.1 40 mm
9.79.2 50 mm
9.79.3 65 mm
9.79.4 75 mm
9.80 Providing and fixing 50 mm bright finished brass cup board or wardrobe
knob of approved quality with necessary screws.
 each 147.45

each 86.15
each 34.75

each 394.95
each 353.45
each 325.35
each 288.95
h

each 374.35
each 300.55
each 232.30
each 160.30

each 273.20
each 259.80

each 723.80

each 603.40

each 264.90
each 306.40
each 313.05
each 333.15

each 63.65
 9.81 Providing and fixing bright finished brass handles with screws etc.
complete:
9.81.1 125 mm
9.81.2 100 mm
9.81.3 75 mm
0004 Production cost of concrete by batch mix plant

9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door
closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg
and door width upto 700 mm), with necessary accessories and screws etc. complete.

9.84 Providing and fixing aluminium extruded section body tubular type universal
hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door
weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed
adjustment with necessary accessories and screws etc. complete.

9.85 Providing and fixing bright finished brass casement window fastener with
necessary screws etc. complete.

9.86 Providing and fixing bright finished brass casement stays (straight peg type) with
necessary screws etc. complete :
9.86.1 300 mm weighing not less than 330 gms
9.86.2 250 mm weighing not less than 280 gms
9.86.3 200 mm weighing not less than 240 gms
9.87 Providing and fixing bright finished brass hasp and staple (safety type) with
necessary screws etc. complete :
9.87.1 150 mm
9.87.2 115 mm
9.87.3 90 mm
CHROMIUM PLATED BRASS FITTINGS
9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6
levers and a pair of lever handles of approved quality with necessary screws etc. complete.

9.89 Providing and fixing chromium plated brass night latch of approved quality
including necessary screws etc. complete.

9.90 Providing and fixing special quality chromium plated brass cupboard locks with six
levers of approved quality including necessary screws etc. complete.

9.90.1 Size 40 mm
9.90.2 Size 50 mm
9.90.3 Size 65 mm
9.90.4 Size 75 mm
each 205.10
each 189.85
each 149.70

each 109.60

each 1025.65

each 856.30

each 76.30

each 186.80
each 149.90
each 143.20

each 118.60
each 107.45
each 94.75

each 817.50

each 857.60

each 272.95
each 286.30
each 321.10
each 355.90
9.91 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe
knobs with nuts complete.
9.92 Providing and fixing chromium plated brass handles with necessary screws etc.
complete:

9.92.1 125 mm
9.92.2 100 mm
0004 Production cost of concrete by batch mix plant
9.93 Providing and fixing chromium plated brass casement window fastener with
necessary screws etc. complete.

9.94 Providing and fixing chromium plated brass casement stays (straight peg type)
with necessary screws etc. complete :

9.94.1 300 mm weighing not less than 330 gms

9.94.2 250 mm weighing not less than 280 gms
9.94.3 200 mm weighing not less than 240 gms
ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL BE ISI
MARKED)
9.95 Providing and fixing ISI marked aluminium butt hinges anodised (anodic
coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary
etc. complete:
9.95.1 125x75x4 mm
9.95.2 125x63x4 mm
9.95.3 100x75x4 mm
9.95.4 100x63x4 mm
9.95.5 100x63x3.2 mm
9.95.6 75x63x4 mm
9.95.7 75x63x3.2 mm
9.95.8 75x45x3.2 mm
Note :- Aluminum hinges shall not be used in wooden shutters, stainless steel
hinges shall be preferred.

9.96 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required
colour or shade, with nuts and screws etc. complete :

9.96.1 300x16 mm
9.96.2 250x16 mm
 each 122.50

each 226.50
each 199.20
each 179.15

each 140.80

each 207.70
each 180.95
each 154.15

dic
ed colour or shade with necessary screws

each 138.55
each 116.20
each 106.85
each 97.60
each 90.40
each 79.05
each 72.45
each 68.45

each 260.30
each 234.90
 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessar
etc. complete :
9.97.1 300x10 mm
9.97.2 250x10 mm
9.97.3 200x10 mm
0004 150x10 mm
Production cost of
concrete by9.97.5
batch 100x10 mm
9.98 Providing
mix plant and fixing aluminium pull bolt lock, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour
and shade, with necessary screws bolts, nut and washers etc. complete.

9.99 Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15 mm,
anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to
required colour or shade, with necessary screws etc. complete.

9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not
less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with
necessary screws etc. complete :

9.100.1 125 mm
9.100.2 100 mm
9.100.3 75 mm
9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required
colour and shade, with necessary screws etc. complete.

9.101.1 Single rubber stopper

9.101.2 Twin rubber stopper
9.102 Providing and fixing aluminium casement stays, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour
and shade, with necessary screws etc. complete.

9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI
marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as
per IS : 1868) aluminium lever handles of approved quality with necessary screws etc.
complete.

9.104 Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end
in pelmets as curtain rod.
odic
red colour or shade, with necessary screws

each 117.65
each 104.40
each 90.80
each 75.55
each 58.65

each 89.90

each 212.85

each 60.05
each 53.25
each 46.30

each 35.50
each 62.25

each 64.55

each 739.80

metre 139.70
GYPSUM BOARD PARTITIONS
9.105 Providing and fixing partition upto ceiling height consisting of G.I. frame
and required board, including providing and fixing of frame work made of
special section power pressed/ roll form G.I. sheet with zinc coating of
0004 Production cost of concrete by batch mix plant
50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to
the floor and ceiling at the spacing of 610 mm centre to centre with
dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor
fastener or metal screws with nylon plugs and the studs 48 mm wide
having one flange of 34 mm and other flange 36 mm and 0.50 mm thick
fixed vertically within flanges of floor and ceiling channel and placed at
a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,
including fixing of studs along both ends of partition fixed flush to wall
with suitable anchor fastener or metal screws with nylon plugs at spacing
of 450 mm centre to centre, and fixing of boards to both side of frame
work by 25 mm long dry wall screws on studs, floor and ceiling channels
at the spacing of 300 mm centre to centre. The boards are to be fixed to
the frame work with joints staggered to avoid through cracks, M.S.
fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5
mm each) to be provided at the horizontal joints of two boards, fixed to
the studs using metal to metal flat head screws, including jointing and
finishing to a flush finish with recommended jointing compound, jointing
tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher
and two coats of primer suitable for board as per manufacture's
specification and direction of engineer in charge all complete.
9.105.1 75 mm overall thickness partition with 12.5 mm thick double skin fire
rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095:
part 3 (Board with BIS certification marks)

9.105.2 75mm overall thickness partition with 12.5 mm thick double skin tapered
edged plain Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board
with BIS certification marks)

9.105.3 66mm overall thickness Partition with 8mm thick double skin Calcium
Silicate Board made with Calcareous & Siliceous materials reinforced with
cellulose fiber manufactured through autoclaving process with Compressive
Strength 225 kg/sq.cm, Bending Strength 100 kg./ sq.cm

9.105.4 66mm overall thickness partition using 8mm thick double skin
multipurpose cement board reinforced with cellulose fibre manufactured through
autoclaving process (High pressure steam cured) as per IS : 14862 with suitable
fibre cement screws

9.105.5 66 mm overall thickness partition using 8 mm thick double skin

multipurpose cement bonded wood particle board manufactured as per IS:
14276 with suitable cement bonded
board screws
9.106 Providing and fixing PTMT handles with necessary screws etc. complete.
9.106.1 125x34x24 mm weighing not less than 23 gms
9.106.2 150x34x24 mm weighing not less than 26 gms
9.107 Providing and fixing PTMT Butt hinges with necessary screws etc. complete.

9.107.1 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not
less than 34 gms

9.107.2 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod

weighing not less than 53 gms
9.108 Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and
necessary screws etc., complete.

9.108.1 152x42x18 mm weighing not less than 60 gms

9.108.2 202x42x18 mm weighing not less than 78 gms
9.109 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with
suitable washers weighing not less than 33 gms
9.110 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm
dia (Average) half cut bamboo placed vertically and fixed together with three numbers
horizontal running members of hollock wood in scantling of section 50X25 mm, fixed with
nails and G.I wire on existing support complete as per direction of Engineer-in-charge.

9.111 Providing and fixing wooden moulded corner beading of triangular shape to the
junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc.
complete 2nd class teak wood.

9.111.1 50x50 mm (base and height)

9.112 Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading
of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the
edges of the Pre-laminated particle board as per direction of Engineer-in-charge.

9.113 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair
of handles of approved quality for aluminium door, with necessary screws etc complete as
per direction of Engineer- in-charge.

9.114 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe
shutters, including fixing with necessary screws etc. complete.

9.114.1 Triple strip vertical type

9.114.2 Double strip (horizontal type)
9.115 Providing and fixing powder coated telescopic drawer channels 300 mm
long with necessary screws etc. complete as per directions of Engineer- in-charge.

9.116 Providing and fixing sliding arrangement in racks/ cupboards/cabinets

shutter by with stainless steel rollers to run inside C or E aluminium
channel section (The payment of C or E channel shall be made separately)
9.117 Providing and fixing factory made uPVC door frame made of uPVC
extruded sections having an overall dimension as below (tolerance
±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door
frame to be Jointed with galvanized brackets and stainless steel screws,
joints mitred and Plastic welded. The hinge side vertical of the frames
reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1
mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame
complete as per manufacturer’s specification and direction of Engineer-
in-charge
9.117.1 Extruded section profile size 48x40 mm
9.117.2 Extruded section profile size 42x50 mm
9.118 Providing and fixing to existing door frames.
9.118.1 24 mm thick factory made PVC door shutters made of styles
and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt ed
both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brac
size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter rein
by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail m
of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to th
shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-
chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (±
wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galva
M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and dire
Engineer-in-charge. (For W.C. and bathroom door
shutter). sqm 1790.65
9.118.2 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a u
hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding e
on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic bra
size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter rein
by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail m
of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to th
shutter styles by means of plastic/ galvanised M.S. 'U' cleats.
sqm 1797.65

sqm 1530.05

sqm 1877.90

sqm 1744.10

sqm 1730.75
 each 35.40
each 35.40

each 64.05

each 76.50

each 58.85
each 92.75

each 34.45

sqm 600.15

metre 310.40

metre 85.60

each 721.75

each 44.85
each 34.15

one set 355.05

each 17.65
 metre 232.55
metre 280.70

s
ess 2 mm (± 0.2 mm) with inbuilt edging on
ans of M.S. galvanised/ plastic brackets of
rews. The styles of the shutter reinforced
mm) wall thickness. The lock rail made up
± 0.2 mm) wall thickness, fixed to the
utter frame filled with a uPVC multi-
l thickness of 20 mm and 1 mm (± 0.1 mm)
y inserting horizontally 6 mm galvanised
manufacturer's specification and direction of

5
utter made of styles and rails of a uPVC
), with inbuilt decorative moulding edging
eans of M.S. galvanised/ plastic brackets of
rews. The styles of the shutter reinforced
mm) wall thickness. The lock rail made up
± 0.2 mm) wall thickness fixed to the
 The shutter frame filled with a uPVC multi-chambered single
panel of size not less than 620 mm, having over all thickness of 20 mm
and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie
bar at two places by inserting horizontally 6 mm galvanised M.S. rod
and fastened with nuts and washers, complete as per manufacturer's
specification and direction of Engineer-in-charge.

9.118.3 25 mm thick PVC flush door shutters made out of a one piece Multi
chamber extruded PVC section of the size of 762 mm X 25 mm or less as per
requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam
end cap of size 23x10 mm are provided on both vertical edges to ensure the
overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and
1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door
shutter should be filled with High Density Polyurethane foam. The Top & Bottom
edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm.
Door shutter shall be reinforced with special polymeric reinforcements as per
manufacturer’s specification and direction of Engineer-in-charge to take up
necessary hardware and fixtures. Stickers indicating the locations of hardware
will be pasted at appropriate places

9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm
with awall thickness of 5 mm, made out of extruded 5mm rigid PVC
0004 Production cost of concrete by batch mix plant
brackets of 15x15 mm M.S. square tube, the vertical door frame profiles
to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM
rubber gasket weather seal to be provided through out the frame. The
door frame to be fixed to the wall using M.S. screws of 65/100 mm size,
complete as per manufacturer’s specification and direction of Engineer- in-
Charge.
9.120 Providing and fixing factory made panel PVC door shutter consisting of
frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm
x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame
shall have a coat of steel primers of approved make and manufacture.
M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of
size 30 mm thickness, 70 mm width out of which 50 mm shall be flat
and 20 mm shall be tapered in 45 degree angle on both side forming
styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm
shall be flat and 20 mm shall be tapered in 45 degree on the inner side
to form top and bottom rail and 115 mm wide PVC sheet out of which 75
mm shall be flat and 20 mm shall be tapered on both sides to form lock
rail. Top, bottom and lock rails shall be provided both side of the panel.
10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as
gap insert for top rail & bottom rail, paneling of 5 mm thick both side
 PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles &
rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading
on inner side, and joined together with solvent cement adhesive. An
additional 5 mm thick PVC strip of 20 mm width is to be stuck on the
interior side of the 'C' Channel using PVC solvent adhesive etc. complete
as per direction of Engineer-in-charge, manufacturer's specification &
drawing.
9.120.1 30 mm thick plain PVC door shutters
9.120.2 30 mm thick pre laminated PVC door shutters
9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames
of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15
mm to receive shutter of 30 mm thickness. The laminate shall be moulded
with fire resistant grade unsaturated polyester resin and chopped mat.
Door frame laminate shall be 2mm thick and shall be filled with suitable
wooden block in all the three legs. The frame shall be covered with fiber
glass from all sides. M.S. stay shall be provided at the bottom to steady the
frame.
9.122 Providing and fixing to existing door frames.
9.122.1 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door
shutter of required colour and approved brand and manufacture, made with
fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP
laminate for forming hollow rails and styles, with wooden frame and suitable
blocks of seasoned wood inside at required places for fixing of fittings, cast
monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856,
including fixing to frames.

9.122.2 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in

different plain and wood finish made with fire retardant grade unsaturated
polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable
wooden blocks inside at required places for fixing of fittings and
polyurethane foam (PUF)/Polystyrene foam to be used as filler material
throughout the hollow panel, casted monolithically with testing parameters of
F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction
of Engineer-in-charge.

9.123 Providing and fixing factory made door frame (single rebate) made out of

single piece extruded solid PVC foam profile with homogenous fine
cellular structure having smooth outer integral skin having 62 mm width
& 32 mm thickness, frame will be mitred & Jointed with self driven self
tapping screws of size 38 mm x 4 mm & PVC solvent cement, including
fixing the frame to wall with suitable dia & length anchor fastener as per
manufacturer's specification and direction of Engineer-in-charge.
9.124 Providing and fixing factory made 30 mm thick door shutter made of
 solid PVC foam profile. The styles & rails shall be of size 75 mm x 30
mm having wall thickness 5 mm. The styles, top & bottom rails shall
have one side wall thickness of 15 mm integrally extruded on the hinge
side of the profile for better screw holding power. The styles and rails
shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm,
painted with primer , all four corners of reinforcement to be welded or
sealed. Solid PVC extruded bidding (push fit type) will be set inside the
styles and the rails with a cavity, to receive single piece extruded 5mm
PVC sheet as panel. The styles and rails will be mitred cut and joint
with the help of PVC solvent cement & self driven self tapping screws.
Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with
wall thickness 5 mm & 15 mm integrally extruded in the middle of the
lock rail & fixed with styles with the help of PVC solvent cement & self
driven self tapping screws of size 100mm x 8 mm complete as per
manufacturer's specifications and direction of Engineer-in-charge.
9.124.1 Non decorative finish
9.124.2 Decorative finish (both side wood grained finish)
9.125 Providing and fixing PVC rigid foam sheet 1 mm thick on existing door
shutters (bathroom and W.C. doors) using synthetic rubber based adhesive.

9.126 Providing and fixing 12 mm thick panelling or panelling and glazing in

panelled or panelled and glazed shutters for doors, windows and
clerestory windows (area of opening for panel inserts excluding portion
inside grooves or rebates to be measured). Panelling for panelled or
panelled and glazed shutters 25 mm to 40 mm thick.
9.126.1 Marine plywood conforming to IS: 710
9.126.2 Fire retardant plywood conforming to IS: 5509
9.127 Providing & Fixing decorative high pressure laminated sheet of plain /
wood grain in gloss / matt/ suede finish with high density protective
surface layer and reverse side of adhesive bonding quality conforming
to IS : 2046 Type S, including cost of adhesive of approved quality.
9.127.1 1.5 mm thick
9.127.2 1.0 mm thick
9.128 Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.)
chajja 4 mm thick of required colour, size and design made by Resin
Transfer Moulding (RTM) Machine Technology, resulting in void free
compact laminate in single piece, having smooth gradual slope curvature
for easy drainage of water and duly reinforced by 2 nos vertically and 1
nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for
grouting on the existing wall along with the 50 mm flanges duly inserted
and sealed in the wall complete in one single piece casted monolithically,
including all necessary fittings . The FRP Chajja should be manufactured
using unsaturated Polyester resin as per IS: 6746, duly reinforced with
fibre glass chopped strand mat (CSM) as per IS: 11551 complete with
protective Gel coat U/V coating on Top for complete resistance from the
 extreme of temperature, weather & sunlight (Only plan area of chajjas
shall be measured for making payment).
9.129 Providing and fixing cup board shutters 25 mm thick, with Pre-laminated
flat pressed three layer particle board or graded wood particle board IS:
12823 marked, exterior grade (Grade l Type ll), having one side decorative
lamination and other side balancing lamination, including IInd class teak
wood lipping of 25 mm wide x12 mm thick with necessary screws and
bright finished stainless steel piano hinges, complete as per direction
of the Engineer-in-Charge
9.130 Providing and fixing cup board shutters with 25 mm thick veneered particle
board IS : 3097 marked, exterior grade (Grade I), of approved make,
including IInd class teak wood lipping of 25 mm wide x 12 mm thick
with necessary screws and bright finished stainless steel piano hinges, complete
as per direction of Engineer-in-Charge.
9.130.1 With decorative veneering on one side and commercial veneering on
other side

9.130.2 With non decorative veneering on both sides

9.131 Providing and fixing factory made shutters of Pre-laminated particle board flat
pressed three layer or graded wood particle board with one side
decorative finish and other side balancing lamination conforming to IS:
12823 Grade l Type ll, of approved design, and edges sealed with water
resistant paint and lipped with aluminium 'U' type edge beading all-
round the shutter, including fixing with angle cleat, grip strip, cadmium
plated steel screws, including fixing of aluminium hinges 100x63x4 mm
etc. complete as per architectural drawing and direction of Engineer-in-
Charge (Cost of 'U' beading and hinges will be paid for separately).
9.131.1 25 mm thick
9.132 Providing and fixing aluminum U beading of required size to Pre-laminated/ flush
door shutter, including fixing etc. complete as per direction of
Engineer-in-charge.
9.133 Providing and fixing, in position concealed G.I. section for wall paneling
using board of required thickness fixed on the 'W' profile (0.55 mm
thick) having a knurled web of 51.55 mm and two flanges of 26 mm
each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel
having one flange of 20 mm and another flange of 30 mm with thickness
of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the
floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully
threaded self-tapping dry wall screws. Board is fixed to the 'W' profile
with 25 mm countersunk ribbed head screws @ 200 mm C/C., all
complete as per the drawing & directions of engineer-in-charge, the
joints of the boards are finished with specially formulated jointing
compound and 48mm wide jointing tape to provide seamless finish.
9.133.1 Tapered edge calcium silicate board made with calcareous &
siliceous materials reinforced with cellulose fiber manufactured
through autoclaving process to give stable crystalline structure with compressive strength 225 k
sq.cm, Bending strength 100 kg/sq.cm.
9.133.1.1 10mm thick sqm 1503.50
 sqm 2008.55

sqm 2612.20

metre 408.25
 sqm 2455.10
sqm 2455.10

metre 702.60

sqm 3496.75

sqm 3963.70

metre 481.85
sqm 3060.60
sqm 3194.40

sqm 1293.05

sqm 2100.40
sqm 2338.75

sqm 890.55
sqm 764.00
sqm 4901.50

sqm 1982.70

sqm 1668.30

sqm 1567.95

sqm 1559.05

kg 530.30
ed
re with compressive strength 225 kg/

sqm 1503.50
 9.133.2 Multipurpose cement board reinforced with suitable fibre
cement screw.
9.133.2.1 8 mm thick cement fibre board as per
IS : 14862
9.133.2.2 8 mm thick Cement bonded wood particle board as per
IS:14276

9.133.3 Plain Gypsum plaster board conforming to IS: 2095 Part - 1:2011 (Board with BIS certification
9.133.3.1 12.5 mm thick sqm 1091.30

0004 Production cost of concrete by batch mix plant

9.134.1.1 with ISI marked M.S. pressed butt hinges

bright finished of required size
9.134.1.1.1 Second class teak wood
9.134.1.1.2 Kiln seasoned and chemically
treated hollock wood

9.134.1.1.3 Kiln seasoned selected class of sheesham

wood

9.134.1.2 With ISI marked stainless steel butt hinges of

required size
9.134.1.2.1 Second class teak wood
9.134.1.2.2 Kiln seasoned and chemically treated
hollock wood

9.134.1.2.3 Kiln seasoned selected class of

sheesham wood

9.134.2 30 mm thick shutters

9.134.2.1 with ISI marked M.S. pressed butt hinges bright
finished of required size
9.134.2.1.1 Second class teak wood
9.134.2.1.2 Kiln seasoned and chemically
treated hollock wood

9.134.2.1.3 Kiln seasoned selected class of sheesham

wood
 sqm 1209.10

sqm 1201.70

:2011 (Board with BIS certification marks)

1091.30

sqm 4484.65

sqm 3282.50

sqm 4035.75

sqm 4631.80

sqm 3429.70

sqm 4213.45

sqm 4006.05

sqm 2976.95

sqm 3621.75
 9.134.2.2 With ISI marked stainless steel butt hinges of
required size
9.134.2.2.1 Second class teak wood
9.134.2.2.2 Kiln seasoned and chemically
treated hollock wood
0004 Production cost of concrete by batch mix plant
sheesham wood
9.135 Providing and fixing fly proof stainless steel grade 304 wire gauge, to

windows and clerestory windows using wire gauge with average width
of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all
complete.
9.135.1 With 2nd class teak wood beading 62X19 mm
9.135.2 With 12 mm mild steel U beading
9.136 Providing and fixing fire resistant door frame of section 143 x 57 mm
having built in rebate made out of 16 SWG G.I. sheet (zinc coating not
less than 120 gm/sqm) duly filled with vermuculite based concrete mix,
suitable for mounting 60 minutes fire rated door shutters. The frame is
fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround
the frame and fixing with dash fastener of approved size and make,
including applying a coat of approved brand fire resistant primer etc.
complete as per direction of Engineer-in-charge (Dash fastener to be paid for
separately).
9.137 Providing and fixing 50 mm thick glazed fire resistant door shutters of
60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified
as per laboratory approved by Engineer-in-charge, with suitable mounting
on door frame, consisting of vertical styles, lock rail, top rail 100 mm
wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc
coating not less than 120 gm/m2) duly filled FR insulation material and
fixing with necessary stainless steel ball bearing hinges of approved
make, including applying a coat of approved fire resistant primer etc. all
complete as per direction of Engineer-in-charge (panneling to be paid for
separately).
9.138 Providing and fixing glazing in fire resistant door shutters, fixed panels
& partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet
(zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed
with M4 x 38 mm SS screws at distance 75 mm from the edges and
150 mm c/c , including applying a coat of approved fire resistant primer/
powder coating of not less than 30 micron on G.I. beading, & special
ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC
2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge
with glass of required thickness having 60 minutes of fire resistance
both integrity & radiation control (EW60) and minimum 20 minutes of
insulation (EI20). The manufacturer have to give test report/certification
of fire glass and the glass should have the stamp showing the value of
 sqm 4153.20

sqm 3124.15

sqm 3768.90

sqm 1404.25
sqm 1051.75

metre 1462.75

sqm 6444.95
 E, EW & EI. The glass shall be tested in approved NABL accredited lab
or by any other accreditation body which operates in accordance with
ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and
calibration scopes shall be eligible. The maximum glazing size shall not be more
than 1100x2200 mm (w x h) or 2.42 sqm.
9.139 Providing and fixing panic bar / latch (Double point) fitted with a single
0004 Production cost of concrete by batch mix plant
brand and manufacture to be approved by the Engineer- in- charge, all complete.

9.140 Providing and fixing plain lining with necessary screws/nuts & bolts/
nails, including a coat of approved primer on one face, and fixed on
wooden /steel frame work, complete as per direction of Engineer-in-
charge (Frame work shall be paid for separately).
9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type
9.141 Providing and fixing PVC Door Frame of size 50x47 mm with a wall
thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC
profile, with mitred cut joints and joint with 2 nos of PVC bracket of size
190 mm x 100 mm long arms of cross section size 35 x 15 mm & self
driven self taping screws, the vertical door profiles to be reinforced with
40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM
rubber gasket weather seal throughout the frame, including jointing 5
mm PVC frame strip with PVC solvent cement on the back of the profile.
The door frame to be fixed to the wall using 8 x100 mm long anchor
fasteners complete, all as per manufacturer's specification and direction of
Engineer -in- charge.
9.142 35 mm thick factory made Solid panel PVC Door shutter, made out of
single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having
styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of
which 75 mm shall be flat and 20 mm shall be tapered (on both side),
having one side thickness of 15 mm integrally extruded on the hinge
side of the profile for better screw holding power, including reinforcing
with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to
be mitered cut & joint with the help of PVC solvent cement, self driven
self tapping screws & M.S. rectangular pipes bracket of size 190 mm X
100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner.
Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x
35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both
ends, having 15 mm solid core in middle of rail section integrally
extruded, fixing the styles & rails with the help of solvent and self driven
self tapping screws of 125 mm x 11 mm, including providing 5 mm
Single piece solid PVC extruded sheet inserted in the door as panel, all
complete as per manufacturer's specification and direction of Engineer-
in-charge.
9.142.1 Non decorative finish (matt finish)
9.142.2 Decorative finish (wood grained finish)
9.143 Providing and Fixing factory made uPVC door frame, made of uPVC
 exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm
(± 0.2 mm), corners of the door frame to be mitred cut and jointed with
plastic brackets and stainless steel screws, reinforcing hinge side
vertical of the frames with PVC profile of Size 28 mm x 30 mm having
wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of
125 mm long stainless steel hinges to the frame, fixing the frame with
jamb with required number & size of anchor dash fastners, all complete as per
manufacturer's specification and direction of Engineer-in-charge.
9.144 Providing and fixing 37 mm thick factory made PVC door shutter, styles
and rails made of PVC hollow section of size 100 mm x 37 mm with
wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles
and rails mitered cut and joint at the corners by means of 2 nos of
plastic brackets of size 75 mm x 220 mm at each corner and stainless
steel screws, reinforcing the hinge side of style by inserting PVC profile
of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail
of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed
to the vertical styles. Providing with PVC snapfit beads and panel of
size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and
fastening with nuts and washers complete, all as per manufacturer's specification
and direction of Engineer-in-charge.
9.145 Providing and Fixing factory made PVC door frame made of PVC extruded
sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2
mm). Both verticalssides of the frame reinforced with PVC profile of
cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and
75 mm x 200 mm long, including reinforcing both ends of the top frame
with PVC profile. PVC Door Frame and PVC reinforcement profile to be
mitred cut, jointed and fusion welded together, including providing and
fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the
frame with jamb with required nos & sizes of anchor dash fastener, all
complete as per manufacturer's specification and direction of engineer- in-charge.

9.146 Providing and fixing 37 mm thick factory made PVC Door shutter, styles
and rails made of PVC hollow extruded printed and laminated section
having overall dimension 115 mm x 37 mm with wall thickness 2 mm (±
0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut
and joint at corners by inserting 2 nos PVC profile reinforcement of size
75 mm x 200 mm long with cross section size of 28 mm x 30 mm
having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements
to be fusion welded together. Only hinge side vertical style to be
reinforced with PVC profile reinforcement in full length. Printed and
laminated PVC lock rail of size 110 mm x 37 mm having wall thickness
2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after
inserting PVC profile reinforcement as in styles and rails, providing with
PVC snap fit beading, panels of 100 x 20 mm printed & laminated and
 sqm 35982.00

each 7145.90

sqm 1084.60

metre 462.25

sqm 3467.20
sqm 4018.40
metre 545.60

sqm 3654.45

metre 611.20
 inserting 2 nos 6 mm dia bright steel rod horizontally with both side
threaded and tightened with check nuts and washers complete, all as per
manufacturer's specification and direction of engineer-in-charge.

9.147A Providing and fixing factory made uPVC white colour casement/casement cum
fixed glazed windows comprising of uPVC multi-chambered frame, sash and
mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2
mm thick galvanized mild steel section made from roll forming process of
required length (shape & size according to uPVC profile), uPVC extruded
glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304
grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I
fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,
plastic caps and necessary stainless steel screws etc. Profile of frame & sash
shall be mitred cut and fusion welded at all corners, mullion (if required) shall be
also fusion welded including drilling of holes for fixing hardware's and drainage
of water etc. After fixing frame the gap between frame and adjacent finished wall
shall be filled with weather proof silicon sealant over backer rod of required size
and of approved quality, all complete as per approved drawing & direction of
Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be
paid separately). Variation in profile dimension in higher side shall be accepted
but no extra payment on this account shall be made.

Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerancein dimension i.e. in depth & width of profile shall be acceptable.
9.147A.1 Casement window single panel with S.S. friction hinges (300 x 19 x
1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both
having wall thickness of 1.9 ±
0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of
window upto 0.75 sqm.)

0004 9.147A.2 Casement window double panels with S.S. friction hinges (300 x 19 x
Production 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion
cost of 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing
concrete by bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50
batch mix sqm).
plant

9.147A.3 Casement window double panels with top fixed with S.S. friction
hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x
68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and
single glazing bead of appropriate dimension. ( Area of window upto 2.50 sqm).

9.147A.4 Casement window single panel with S.S. friction hinges (400 x 19 x
1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having
wall thickness of 2.3 ±
0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of window above 0.75 sqm.) sqm 10347.05

9.147A.5 Casement window double panels with S.S. friction hinges

(350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm
& sash / mullion 67 x 80 mm both having wall thickness of
 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of
appropriate dimension. (Area of window above 1.50 sqm).
9.147A.6 Casement cum fixed panel window having both end single
casement panel, middle fixed panels and at top completely
fixed ventilator with S.S friction hinges (350 x 19 x 1.9)
made of (big series) frame 67 x 60 mm , sash 67 x 80 mm
& mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2
mm and single glazing bead/double glazing bead of
appropriate dimension. (Area of window above 3.00 sqm upto 5.00
sqm).
9.147B Providing and fixing factory made uPVC white colour fixed glazed windows/
ventilators comprising of uPVC multi-chambered frame and mullion
(where ever required) extruded profiles duly reinforced with 1.60 ± 0.2
mm thick galvanized mild steel section made from roll forming process
of required length (shape & size according to uPVC profile), , uPVC
extruded glazing beads of appropriate dimension, EPDM gasket, G.I
fasteners 100 x 8 mm size for fixing frame to finished wall, plastic
packers, plastic caps and necessary stainless steel screws etc. Profile
of frame shall be mitred cut and fusion welded at all corners, mullion (if
required) shall be also fusion welded including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled with weather proof silicon
sealant over backer rod of required size and of approved quality, all
complete as per approved drawing & direction of Engineer-in-Charge.
(Single / double glass panes and silicon sealant shall be paid
separately). Variation in profile dimension in higher side shall be accepted
but no extra payment on this account shall be made.
Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerance in dimension i.e. in depth & width of profile shall be acceptable.
9.147B.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm &
mullion 47 x 68 mm both having wall thickness of
1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto
0.75 sqm.)

9.147C Providing and fixing factory made uPVC white colour casement/ Casement
cum fixed glazed door comprising of uPVC multi-chambered frame,
sash and mullion (where ever required) extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll
forming process of required length (shape & size according to uPVC
profile), uPVC extruded glazing beads of appropriate dimension, EPDM
gasket, zinc alloy (white powder coated) 3D hinges and one handle on
each side of panels along with zinc plated mild steel multi point locking
sqm 3954.15

sqm 10443.75

sqm 9635.40

sqm 7776.70
sqm 10746.90

sqm 8135.75

sqm 7249.90
 having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing
to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut an
welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished w
be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all c
as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon se
shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra pay
on this account shall be made.

Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerance in dimension i.e. in depth & width of profile shall be acceptable.
9.147C.1 Casement door with 3D hinges made of (big series) frame
67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3
± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of door upto 2.00 sqm).

9.147C.2 Casement door with top hung ventilator with 3D and S.S. friction
hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm,
sash 67 x 110 mm & mullion 67 x 80 mm all having wall
thickness of 2.3 ±. 0.2 mm and single glazing bead / double
glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)

0004 Production cost of concrete by batch mix plant

Note: For uPVC frame and sash extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.
 asteners 100 x 8 mm size for fixing frame
rame & sash shall be mitred cut and fusion
d including drilling of holes for fixing
ween frame and adjacent finished wall shall
d size and of approved quality, all complete
double glass panes and silicon sealent
shall be accepted but no extra payment

le.

sqm 10284.70

sqm 10451.95
 9.147D.1 Two track two panels sliding window made of (small series)
frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of
1.9 ± 0.2 mm and single glazing bead of appropriate dimension.
(Area of window upto 1.75 sqm)

9.147D.2 Three track three panels sliding window with fly proof SS wire mesh
(Two nos. glazed & one no. wire mesh panels) made of (small
series) frame 92 x 44 mm & sash 32 x 60 mm both having wall
thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate
dimension (Area of window upto
1.75 sqm).

9.147D.3 Two track two panels sliding window made of (big series) frame 67
x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2
mm and single glazing bead / double glazing bead of appropriate
dimension . (Area of window above 1.75 sqm upto 2.50 sqm).

9.147D.4 Three track three panels sliding window with fly proof S.S wire
mesh (Two nos. glazed & one no. wire mesh panels) made of (big
series) frame 116 x 45 mm & sash 46 x 62 mm both having wall
thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing
bead of appropriate dimension. (Area of window above 1.75 sqm).
sqm 9642.60

0004 Production Three track three panels sliding window made of (big series)
cost of concrete by
frame 116 x 45 mm & sash 46 x 62 mm both having wall
batch mix plant
thickness of 2.3 ± 0.2 mm and single glazing bead / double
glazing bead of appropriate dimension. (Area of window
above 1.75 sqm)
9.147E Providing and fixing factory made uPVC white colour sliding glazed window
above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extr
profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of req
length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC ext
interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder co
handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear w
keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 30
grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm s
fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and
welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the
between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of requir
and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes,
 sqm 7634.10

sqm 10030.30

sqm 7821.15

sqm 9183.30

ndow
ith in-built roller track and sash extruded
ade from roll forming process of required
extruded glazing beads, uPVC extruded
ool pile, zinc alloy (white powder coated)
locking having transmission gear with
mesh panel), stainless steel (SS 304
20 kg), G.I fasteners 100 x 8 mm size for
rame & sash shall be mitred cut and fusion
e of water etc. After fixing frame the gap
n sealent over backer rod of required size
 wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side sha
accepted but no extra payment on this account shall be made.

Note: For uPVC frame and sash extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.
9.147E.1 Two track two panels sliding window made of (big series)
frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of window
above 2.50 sqm upto 4.00 sqm.)
0004 Production Two track four panels sliding window made of (big series) frame 67
cost of concrete by x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2
batch mix plant mm and single glazing bead / double glazing bead of appropriate
dimension. (Area of window above 4.00 sqm upto 8.00 sqm).

9.147F Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-cham
frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild st
section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dim
uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM
wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mi
multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if requ
stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I
fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame
shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of w
etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sea
over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engin
Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dim
in higher side shall be accepted but no extra payment on this account shall be made.

Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width o
shall be acceptable.
9.147F.1 Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm
having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimen
(Area of door above 2.00
sqm upto 5.00 sqm) sqm 6882.40
profile dimension in higher side shall be

sqm 7798.30

sqm 6783.70
oor comprising of uPVC multi-chambered
0 ± 0.2 mm thick galvanized mild steel
g to uPVC profile), appropriate dimension
ne sash adaptor (if required), EPDM gasket,
me panels along with zinc plated mild steel
wder coated) cresent lock (if required),
bearing capacity to be 120 kg), G.I
ss steel screws etc. Profile of frame & sash
fixing hardware's and drainage of water
filled with weather proof silicon sealent
roved drawing & direction of Engineer-in-
d separately). Variation in profile dimension
ade.

in dimension i.e. in depth & width of profile

me 67 x 50 mm & sash 46 x 82 mm both

e glazing bead of appropriate dimension.

6882.40
 9.147F.2 Two track four panels sliding door made of (big series) frame
67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ±
0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of door above 8.00
sqm upto 10.00 sqm).
9.147F.3 Three track three panels sliding door made of (big series) frame
116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3
± 0.2 mm and single glazing bead/ double glazing bead of
appropriate dimension. (Area of door above
5.00 sqm)

9.147F.4 Three track three panels sliding door with fly proof S.S wire mesh
(Two nos. glazed & one no. wire mesh panels) made of (big series)
frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness
of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of door above 2.00 sqm upto 5.00
sqm)

0004 Production cost of concrete by batch mix plant

9.148.1 200 x 19 x 1.9 mm

9.148.2 250 x 19 x 1.9 mm
9.148.3 300 x 19 x 1.9 mm
9.148.4 350 x 19 x 1.9 mm
9.148.5 400 x 19 x 1.9 mm
9.149 Providing and fixing casement handle made of zinc alloyed (white powder
coated) for uPVC casement window with necessary screws etc. complete.

9.150 Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC
sliding window with necessary screws etc. complete.

9.151 Providing and fixing steel roller for uPVC sliding window with necessary screws
etc. complete.

9.152 Providing and fixing steel roller for uPVC sliding door with necessary screws etc.
complete.

9.153 Providing and fixing steel (white power coated) crescent lock for uPVC sliding
window/ door with necessary screws etc. complete.

9.154 Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6
mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @
60 cm centre to centre both ways (vertically & horizontally) or at required spacing near
opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with
steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for
doors, windows, electrical conduits, switch boards etc., including providing with two coats of
approved steel primer etc. complete, all as per direction of Engineer-in-charge.
sqm 6140.90

sqm 6940.45

sqm 8766.85

each 311.80
each 345.25
each 376.00
each 511.15
each 516.50

each 188.55

each 167.15

each 94.90

each 155.10

each 161.80

kg 133.35
9.155 Providing and fixing panelling or paneling and glazing in panelled or
panelled and glazed shutters for doors, windows and clerestory windows ( area of opening
for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for
panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination
on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587

9.156 Providing and fixing Pre -laminated medium density fibre board exterior grade
(Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete
( Frames, backing or studding to be paid separately).

9.156.1 Pre-laminated with decorative lamination on both side exterior Grade - I

MDF Board 12 mm thick confirming to IS:14587

9.156.2 Pre-laminated with decorative lamination on both side exterior

0004 Production cost of concrete by batch mix plant
9.157 Providing and fixing Pre-laminated medium density fibre board IS:
14587:1998 marked, with one side decorative lamination other side balancing lamination
Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be
sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid
separately).

9.157.1 Pre-laminated with decorative lamination one side and other side
balancing lamination exterior Grade - I MDF Board 18 mm thick confirming to
IS:14587

9.157.2 Pre-laminated with decorative lamination one side and other

side balancing lamination exterior Grade - I MDF Board 25 mm thick
confirming to IS:14587

9.158 Providing and fixing in wall lining medium density fibre board IS:
14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing
lamination, with necessary fixing arrangement and screws etc. complete.

9.158.1 12 mm thick.
9.158.2 18 mm thick.
9.158.3 25 mm thick.
9.159 Providing and fixing 25mm thick pre-laminated medium density fibre board
exterior grade ( Grade-I) IS:14587:1998 marked with one side decorative and other side
balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape
2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S.
piano hinges conforming to IS:3818 marked with necessary screw etc
all complete.

9.160 Providing and fixing skirting with Pre-laminated medium density fibre
board exterior grade (Grade-I) conforming to IS: 14587:1998 marked,
with (one side decorative and other side balancing lamination and edges
to be sealed with PVC edge bending tape 2.00 mm thick of approved
 brand with necessary fixing arrangements and screws, including drilling
necessary holes for rawl plugs etc. all complete.
9.160.1 18 mm thick.
9.160.2 25 mm thick.
9.161 Providing and fixing fire resistant door frame of section 50 x 60 mm on
horizontal side & 35 x 60 mm on vertical sides having built in rebate
made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/
m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters.
The frame shall be filled with Mineral wool Insulation having density min
96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos
( 5 each on vertical style & 4 on horizontal style of size M10 x 80 )
suitable for fixing in the opening along with Factory made Template for
SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated
glazed shutter . The frame shall be finished with a approved fire resistant
primer or Powder coating of not less than 30 micron in desired shade
as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is
excluded).
9.162 Providing and fixing 60 mm thick glazed fire resistant door shutters of
120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999,
tested and certified as per laboratory approved by Engineer-in-charge,
with suitable mounting on door frame, consisting of vertical styles, top
rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60
mm made out of 1.6mm thick G.I. sheet (zinc coating not less than
120gm/m²) duly filled mineral wool insulation having density min 96 kg/
m³ and fixing with necessary stainless steel ball bearing hinges of size
100x89x3mm of approved make, including applying a coat of approved
fire resistant primer or powder coating not less than 30 micron etc all
complete as per direction of Engineer-in-charge (panelling to be paid for
seperately).
9.163 Providing and fixing non load bearing fixed frame for fire resistant glazed
Partition for 120 minutes Fire Rating, made out to a profile of dimension
60mm x 70 mm of 1.6 mm thick galvanised steel sheet as per test
evidence suitable for fixing fire rated glass for 120 minutes of both integrity
& radiation control (EW120) & minimum 20 minutes of insulation
(EI20).The profile has to be fixed to the supporting construction by means
of anchor fasteners of size M10 x 80, every 150 mm from the edges and
every 500 mm (approx) c/c. Linear measurement of frame shall be
measured for payment. The frame shall be filled with mineral wool
insulation of density min 96kg/ m³. and finished with a approved fire
resistant primer or Powder coating of not less than 30 micron in desired
shade as per NBC 2016, IS 16231 (Part 3):2016 and directions of
Engineer - in- charge.
9.164 Providing and fixing glazing in fire resistant door shutters, fixed panels
& partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less
than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm
from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/
powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20
mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per
direction of Engineer-in-charge with glass of required thickness having 120 minutes of fire
resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation
(EI20). The manufacturer have to give test report/certification of fire glass and the glass
should have the stamp showing the value of E, EW & EI. The glass shall be tested in
approved NABL accredited lab or by any other accreditation body which operates in
accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and
calibration scopes shall be eligible. The maximum glazing size shall not be more than
1100x2200 mm (w x h) or 2.42 sqm.

9.165 Providing and fixing bright /matt finished Stainless Steel handles of approved
quality & make with necessary screws etc all complete.
9.165.1 125 mm
9.165.2 100mm
9.165.3 75 mm
9.166 Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood
particle board as per IS : 15786:2008 of approved brand and shade with suitable full
threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet
under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings
to be paid separately).

9.166.1 18 mm thick
9.167 Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood
particle board as per IS : 15786:2008 of approved brand and shade with suitable full
threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under
kitchen counter etc. all complete as per direction of Engineer-in-charge.

9.168 Providing and fixing cupboard shutter with 19mm thick one side decorative
and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of
approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending
machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per
direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be
paid separately)

9.169 Providing and fixing 19mm thick both side balancing lamination factory pressed
BWP grade marine ply as per IS 710 of approved brand
boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws
etc. complete as per direction of Engineer-in- charge.
 9.170 Providing and fixing stainless steel fancy handle of approved make fixed
with SS screws etc. complete as per direction of Engineer-in-charge.
9.170.1 200 mm
9.171 Providing and fixing stainless steel soft closing spring hinges at 0 degree
hinges (hydraulic type) of approved make/brand to cupboard shutters
with full threaded steel screws including making necessary recess in board and
finished etc. complete as per direction of Engineer-in-charge.
9.172 Providing and fixing stainless steel soft closing heavy type telescopic
drawer channels of approved make 500 mm long with screws etc. complete as
per directions of Engineer- in-charge.
9.173 Providing and fixing ready made 304 grade stainless steel Modular kitchen
basket and accessories such as right angle basket (Plain Cup & Saucer,
plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner
set basket, kitchen grain basket, Multipurpose basket as per site
requirement including finishing (wherever required) and fittings. The same
shall be fixed with necessary stainless steel nuts & bolts, Stainless
Steel screws & telescopic channel etc. as per direction of Engineer-in-
charge. (For payment purpose only weight of Stainless steel basket
shall be considered excluding weight of all fixing accessories such as
nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and
fixing telescopic channel shall be paid separately)
9.174 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding
tape of approved quality for cupboard/wardrobe shutters including
necessary synthetic resin hot pressed to edges on binding machine
etc. complete as per directions of Engineer- in-charge.
SUB HEAD : 10.0
STEEL WORK

219
sqm 1693.30

sqm 921.35

sqm 1120.55

sqm 1260.70

sqm 1679.45

sqm 1065.15
sqm 1275.60
sqm 1709.75

sqm 1890.90
 sqm 1834.45
sqm 2268.60

metre 1791.05

sqm 9736.05

metre 1791.05
sqm 39995.80

each 100.45
each 75.70
each 48.95

sqm 1215.75

sqm 902.55

sqm 2563.75

sqm 2339.60
 each 153.15

each 226.75

one set 749.70

kg 423.70

metre 38.45
 BASIC RATES (10.0 STEEL WORK)
Code No. Description

0100 Bandhani
0101 Bhisti
Blacksmith 1st class
0004 Production cost of concrete by batch mix plant

0103 Blacksmith 2nd class

0112 Carpenter 2nd class
0114 Beldar
0116 Fitter (grade 1)
0119 Glazier
0123 Mason (brick layer) 1st class
0124 Mason (brick layer) 2nd class
0139 Skilled Beldar (for floor rubbing etc.)
0595 Bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm

0969 Pulley 25 mm dia

0973 Rolling shutter made of 80x1.25 mm machine rolled laths
0974 Top cover for rolling shutters 1.25 mm thick
0975 27.5 cm long wire spring grade No. 2 for rolling shutters
0976 Ball bearing for rolling shutters
0977 Extra for mechanical devices chain and cranked operation for operating rolling
shutters: exceeding 10.00 sqm and up to
16.80 sqm area of door

0978 Extra for mechanical devices chain and cranked operation for operating rolling
shutters: exceeding 16.80 sqm area of door
1002 Mild steel round bar 12 mm dia and below
1003 Mild steel round bar above 12 mm dia
1007 Structural steel such as tees, angles channels and R.S. joists
1008 Flats up to 10 mm in thickness
1009 Flats exceeding 10 mm in thickness
1010 Mild steel plates
1011 Steel glazed door, window/ ventilator, all members viz. F7D, F4B, K11 and K12B
etc.
1013 Mild steel sheets of 1.00 mm thickness for tanks
1019 Mild steel hooks
1020 Mild steel rivets
1034 Bolts and nuts up to 300 mm in length
1035 Bolts and nuts above 300 mm in length
1036 Iron pintels including welded pin
1143 Steel beading 10x10x1.6mm (box type)
1214 Welding by gas plant
1215 Welding by electric plant
1221 M.S. 20 mm dia holding down bolts
1222 Mild steel sheets with bolts and nuts to rest on pintels
1549 G.I. pipes 40 mm dia
2205 Carriage of Steel
2271 Carriage of G.I. pipes below 100 mm dia
2406 Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm)

2407 Float glass panes of nominal thickness 5 mm (weight not less than
12.50 kg/sqm)
2506 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm
dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm
dia polyamide PA 6 grade sleave. Size 10mm x 60 mm

2507 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm
dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm
dia polyamide PA 6 grade sleave. Size 10mm x 80 mm

2508 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm
dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm
dia polyamide PA 6 grade sleave. Size 10 mm x 120 mm

2509 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm
dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm
dia polyamide PA 6 grade sleave. Size 10mm x 140 mm

2510 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm
dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm
dia polyamide PA 6 grade sleave. Size 10mm x 160 mm

4001 Stainless steel (Grade-304)hollow section round/square tubes

4002 Stainless steel bolts/square bar and plates
4006 Pressed steel door frames (mild steel sheet 1.60 mm) Profile "B"
4007 Pressed steel door frames (mild steel sheet 1.60 mm) Profile "C"
4008 Pressed steel door frames (mild steel sheet 1.60 mm) Profile "E"
4009 Mild steel tubes hot finished welded type
4010 Mild steel tubes hot finished seamless type
4011 Mild steel tubes electric resistant or induction butt welded
4012 Circular C.I. Box for ceiling fan internal dia 140 mm, 73 mm height, toplid of
1.5mm thick MS sheet
4013 Pulley 40 mm dia
7029 Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of
wire 0.63 mm
7044 Rolling shutters of 80x0.90 mm laths
7045 Rolling shutters of 80x1.2 mm laths
7046 Top cover of Rolling shutters 0.90 mm thick
7047 Top cover of Rolling shutters 1.20 mm thick
7068 Extra for providing grilled rolling shutters with 8 mm dia M.S. rod
8737 Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50mm dia wire

9977 Carriage
9988 Carriage and sundries
9999 Sundries
RK)
Unit Rate

day 714.00
day 714.00
day 784.00
day 714.00
day 714.00
day 645.00
day 784.00
day 714.00
day 784.00
day 714.00
day 714.00

10 Nos 80.00

each 48.00
sqm 1400.00
metre 800.00
each 300.00
each 260.00

sqm 800.00

sqm 800.00

quintal 4850.00
quintal 4750.00
quintal 4950.00
quintal 4850.00
quintal 4950.00
quintal 5400.00

kg 54.00

quintal 4850.00
each 32.00
quintal 5100.00
quintal 5200.00
quintal 5300.00
each 37.00
metre 27.00
 cm 2.00
cm 2.00
quintal 6100.00
each 120.00
metre 290.00
tonne 145.72
tonne 145.72

sqm 309.00

sqm 515.00

10 Nos 270.00

10 Nos 312.00

10 Nos 380.00

10 Nos 468.00

10 Nos 598.00
kg 230.00
kg 120.00
metre 200.00
metre 220.00
metre 250.00
kg 60.00
kg 70.00
kg 50.00

each 55.00

each 35.00
 sqm 250.00

sqm 1300.00
sqm 1375.00
metre 450.00
metre 560.00
sqm 500.00

sqm 413.00

L.S. 2.12
L.S. 2.12
L.S. 2.12
 10.0 STEEL WORK
Code No. Description

10.1 Structural steel work in single section, fixed with or without connecting plate,
including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer all complete.
Structural steel work riveted, bolted or welded in built up sections, trusses and
0004 Production cost of concrete by batch mix plant

framed work, including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer all complete.
10.3 Providing and fixing in position collapsible steel shutters with vertical channels
20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and
bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with
bolts, nuts, locking arrangement, stoppers,
handles, including applying a priming coat of approved steel primer.
10.4 Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and
diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the
junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at
the top and bottom respectively, including
applying a priming coat of approved steel primer
10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle
iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary
fittings complete, including applying a priming coat of approved steel primer.

10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces

10.5.2 Using flats 30x6mm for diagonal braces and central cross piece
10.6 Supplying and fixing rolling shutters of approved make, made of required size
M.S. laths, interlocked together through their entire length and jointed together at
the end by end locks, mounted on specially designed pipe shaft with brackets,
side guides and arrangements for inside and outside locking with push and pull
operation complete, including the cost of providing and fixing necessary 27.5
cm long wire springs manufactured from high tensile steel wire of
adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of
required thickness for rolling shutters.

10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover

10.6.2 80x1.20 mm M.S. laths with 1.20 mm thick top cover
10.6.3 80x0.90 mm M.S. laths with 0.90 mm thick top cover
10.7 Providing and fixing ball bearing for rolling shutters.
10.8 Extra for providing mechanical device chain and crank operation for operating
rolling shutters.
10.8.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area
10.8.2 Exceeding 16.80 sqm in area
10.9 Extra for providing grilled rolling shutters manufactured out of 8 mm dia
M.S. bar instead of laths as per design approved by Engineer-in- charge,
(area of grill to be measured).
Unit Rate

kg 93.05

kg 78.20

sqm 9397.35

sqm 5374.35

sqm 4781.15
sqm 4615.15

sqm 3008.80
sqm 2868.30
sqm 2718.90
each 424.20

sqm 1108.70
sqm 1108.70

sqm 668.95
 10.10 Fixing standard steel glazed doors, windows and ventilators in walls,
including fixing of float glass panes with glazing clips and special metal- sash putty of approved make, or metal bea
with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be su
by department free of cost.
10.10.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 C
3 coarse
sand : 6 graded stone aggregate 20 mm nominal size) kg 69.35

10.10.2 Fixing with carbon steel galvanised dash fastener of required

dia and size (to be paid for separately)
10.11 Providing and fixing factory made ISI marked steel glazed doors, windows and
ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B
and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded
and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including
priming coat of approved steel primer, but excluding the cost of other fittings, complete all as
per approved design, (sectional weight of only steel members shall be measured for
payment).

0004 Production cost of concrete by batch mix plant

concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size)
10.11.2 Fixing with carbon steel galvanised dash fastener of required
dia and size (to be paid for separately)
10.12 Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type),
approved shape and section with screws instead of glazing clips and metal sash putty, in
steel doors, windows, ventilators and
composite units.
10.13 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel
Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and
screws and applying a priming coat of approved steel primer.

10.13.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement

concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size).
10.13.2 Fixing with carbon steel galvanised dash fastener of required
dia and size (to be paid for separately)
10.14 Providing and fixing pressed steel door frames conforming to IS: 4351,
manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges,
jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25
mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by
mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock
strike-plate and shock absorbers as specified and applying a coat of approved steel primer
after pre-treatment of the surface as directed by Engineer-in-charge:
ty of approved make, or metal beading
tal beading with screws, shall be supplied

ock 15x10x10 cm of C.C. 1:3:6 (1 Cement :

69.35

kg 34.40

kg 175.65

kg 109.15

metre 45.95

kg 114.65

kg 109.35
 10.14.1 Profile B
10.14.1.1 Fixing with adjustable lugs with split end tail to
each jamb
0004 Production
10.14.1.2 Fixing with carbon steel galvanised dash fastener
cost of concrete by batch
mix plant of required dia and size (to be paid for separately)
10.14.2 Profile C
10.14.2.1 Fixing with adjustable lugs with split end tail to
each jamb
10.14.2.2 Fixing with carbon steel galvanised dash fastener
of required dia and size (to be paid for separately)
10.14.3 Profile E
10.14.3.1 Fixing with adjustable lugs with split end tail to
each jamb
10.14.3.2 Fixing with carbon steel galvanised dash fastener
of required dia and size (to be paid for separately)
10.15 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and
cupboard with rectangular/ L-Type sections, made of 1.60 mm thick
M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including
fixing of necessary butt hinges and screws and applying a priming coat of approved steel
primer.

10.15.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement

concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size)
10.15.2 Fixing with carbon steel galvanised dash fastener of required dia and
size (to be paid for separately)

10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer, including welding and bolted with special shaped washers etc.
complete.
10.16.1 Hot finished welded type tubes
10.16.2 Hot finished seamless type tubes
10.16.3 Electric resistance or induction butt welded tubes
10.17 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to
shape with hooked ends in R.C.C. slabs or beams during laying, including painting the
exposed portion of loop, all as per standard design
complete.
10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan
clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top
surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box
by means of
3.3 mm dia round headed screws, one lock at the corners. Clamp shall
be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
metre 444.50

metre 433.15

metre 471.25

metre 459.90

metre 511.40

metre 500.05

kg 146.55

kg 133.60

kg 154.90
kg 168.95
kg 140.85

each 185.95

each 185.20
10.19 Providing and fixing mild steel round holding down bolts with nuts and
washer plates complete.
10.20 Providing and fixing bolts including nuts and washers complete.
10.21 Providing and fixing M.S. rivets of sizes in position.
10.22 Welding by gas or electric plant including transportation of plant at site etc.
complete.

Steel work welded in built up sections/ framed work, including cutting, hoisting,
0004 Production cost of concrete by batch mix plant

fixing in position and applying a priming coat of approved steel primer using
structural steel etc. as required.

10.25.1 In stringers, treads, landings etc. of stair cases, including use of

chequered plate wherever required, all complete

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets,

gates and similar works
10.26 Providing and fixing hand rail of approved size by welding etc. to steel ladder
railing, balcony railing, staircase railing and similar works, including applying priming coat
of approved steel primer.

10.26.1 M.S. tube

10.26.2 E.R.W. tubes
10.26.3 G.I. pipes
10.27 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash
fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk
head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in
frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.

10.27.1 10 x 60 mm
10.27.2 10 x 80 mm
10.27.3 10 x 120 mm
10.27.4 10 x 140 mm
10.27.5 10 x 160 mm
10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,
channels, plates etc., including welding, grinding, buffing, polishing and making curvature
(wherever required) and fitting the same with necessary stainless steel nuts and bolts
complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners ,
stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with
suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only
weight of stainless steel members shall be considered excluding fixing accessories such as
nuts, bolts,
fasteners etc.).
kg 88.50

kg 140.15
kg 237.85

cm 3.40

kg 102.25

kg 142.30

kg 157.15
kg 150.40
kg 180.20

each 111.70
each 117.30
each 144.60
each 156.35
each 191.95

kg 612.25
10.29 Providing & fixing fly proof wire gauze to windows, clerestory windows &
doors with M.S. Flat 15x3 mm and nuts & bolts complete.
10.29.1 Galvanised M.S. Wire gauze with 0.63 mm dia wire and
1.4 mm aperture on both sides
10.29.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire
0004 Production cost of concrete by batch mix plant
10.30 Providing & fixing glass panes with putty and glazing clips in steel doors,
windows, clerestory windows, all complete with :
10.30.1 4.0 mm thick glass panes
10.30.2 5.5 mm thick glass panes
10.31 Providing and fixing angle iron frames for doors, windows and ventilators of mild
steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5
mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener,
including fixing of necessary butt hinges and screws and applying a priming coat of approved
steel
primer, all complete as per the direction of Engineer-In-charge.
SUB HEAD : 11.0
FLOORING
229
sqm 732.20

sqm 971.55

sqm 940.30
sqm 1243.50

kg 103.70
 BASIC RATES (SH: 11.0 FLOORING)
Code Description
No.
0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Machine for rubbing of floors

0004 Production cost of concrete by batch mix plant

0100 Bandhani
0101 Bhisti
0103 Blacksmith 2nd class
0111 Carpenter 1st class
0114 Beldar
0115 Coolie
0123 Mason (brick layer) 1st class
0124 Mason (brick layer) 2nd class
0126 Mason (for ornamental stone work) 1st class
0127 Driver for (Road roller, concrete mixer, Trucks etc.)
0130 Mistry
0139 Skilled Beldar (for floor rubbing etc.)
0295 Stone Aggregate (Single size) : 20 mm nominal size
0296 Stone Aggregate (Single size) : 12.5 mm nominal size
0297 Stone Aggregate (Single size) : 10 mm nominal size
0298 Stone Aggregate (Single size) : 06 mm nominal size
0313 Blown type petroleum bitumen of penetration 85/25 of approved quality

0367 Portland Cement (OPC-43 Grade)

0368 White Cement
0682 Oxidised mild steel screws 50 mm
0784 Marble dust/ powder
0785 Marble chips up to 4 mm and down size White & black
0788 Marble chips large size above 4 mm White & black
0874 Black colour dark shade pigment
0875 Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment

0876 Green or blue medium shade pigment

0982 Coarse sand (zone III)
0983 Fine sand (zone IV)
1007 Structural steel such as tees, angles channels and R.S. joists
1008 Flats up to 10 mm in thickness
1149 Glass strip 4 mm thick 40 mm deep
1164 Red sand stone slab 40 mm thick (un-dressed)
1165 White sand stone slab 40 mm thick (un-dressed)
1168 Kota stone slab 20 mm to 25 mm thick (semi-polished)
1187 First class teak wood in scantling
1190 Second class teak wood in planks
1194 Second class deodar wood in planks
1201 Precast terrazzo tiles 22 mm thick (light shade)
1202 Precast terrazzo tiles 22 mm thick (medium shade)
1203 Precast terrazzo tiles 22 mm thick (dark shade)
1215 Welding by electric plant
1227 Chequered terrazzo tiles 22 mm thick (light shade)
1228 Chequered terrazzo tiles 22 mm thick (medium shade)
1229 Chequered terrazzo tiles 22 mm thick (dark shade)
1231 Extra for selected planks of second class teakwood
1240 18 mm thick Italian Marble stone slab, Perlato (slab area up to 0.5 sqm).

1241 Commercial LPG in cylinder

1242 Glass mossaic tiles (20 mm x 20 mm x 4 mm)
1243 Tile fixing chemical adhesive
1244 Cement Polymer Grout Compound
1245 Acid for cleaning tiles
2201 Carriage of Bricks
2202 Carriage of Stone aggregate below 40 mm nominal size
2203 Carriage of Coarse sand
2204 Carriage of Timber
2205 Carriage of Steel
2209 Carriage of Cement
2211 Carriage of Tar / Bitumen
2216 Carriage of Stone blocks white & red sand stone & kota stone slab
2261 Carriage of Fine sand (1 part of badarpur sand: 2 parts jamuna sand)
2268 Carriage of Marble dust and/or marble chips
2500 Extra for selected planks of second class deodar wood
2602 Common burnt clay F.P.S. (non modular) bricks class designation 7.5

2708 Truf Paver (500 x 500 x 40 mm)

2709 Ceremic Tiles Pieces for Crazy Flooring
NG)
Unit Rate

day 800.00

day 300.00
day 714.00
day 714.00
day 714.00
day 784.00
day 645.00
day 645.00
day 784.00
day 714.00
day 784.00
day 784.00
day 784.00
day 714.00
cum 1400.00
cum 1350.00
cum 1350.00
cum 1400.00

tonne 34790.00

tonne 5000.00
tonne 11200.00
100 Nos 76.00
cum 1130.00
quintal 189.00
quintal 250.00
kg 70.00

kg 60.00

kg 56.00
cum 1500.00
cum 900.00
quintal 4950.00
quintal 4850.00
metre 20.00
sqm 230.00
 sqm 250.00
sqm 320.00
10 cudm 880.00
10 cudm 791.00
10 cudm 500.00
sqm 285.00
sqm 265.00
sqm 245.00
cm 2.00
sqm 275.00
sqm 300.00
sqm 260.00
10 cudm 150.00

sqm 3209.00

kg 84.00
sqm 2049.00
kg 8.70
kg 13.00
litre 18.00
1000 Nos 437.15
cum 163.93
cum 163.93
cum 187.35
tonne 145.72
tonne 145.72
tonne 163.93
tonne 145.72
cum 163.93
cum 163.93
10 cudm 113.00

1000 Nos 4590.00

sqm 510.00
quintal 145.00
2710 White marble makrana second quality plain veined stone pieces
for crazy flooring
2711 FS800H Grade Flooring Panel (Size 600 mm x600 mm x32 mm)
2712 Zinc Electroplated Pedestals - 300 mm
2713 Zinc Electroplated Pedestals - 450 mm
Zinc Electroplated Tube Stinger
0004 Production cost of concrete by batch mix plant

2715 Machine Screw for Fixing

2750 8 mm thick granite stone tiles (mirror polished of all shades)
2751 8 mm thick marble tiles (polished) Raj Nagar
2752 Double charge vitrified tile polished finish of size 60 x 60 cm
2753 Double charge vitrified tile polished finish of size 80 x 80 cm
2754 Double charge vitrified tile polished finish of size 60 x 120 cm
2755 Double charge vitrified tile polished finish of size 80 x 160 cm
2756 Double charge vitrified tile polished finish of size 100 x 100 cm
2757 Glazed vitrified tiles polished finish of size 60 x 60 cm
2758 Glazed vitrified tiles polished finish of size 60 x 120 cm
2759 Glazed vitrified tiles polished finish of size 80 x 80 cm
2760 Glazed vitrified tiles polished finish of size 80 x 120 cm
2761 Glazed vitrified tiles polished finish of size 120 x 120 cm
2762 Glazed Vitrified tiles Matt/Antiskid finish of size 60 x 60 cm
2763 Glazed Vitrified tiles Matt/Antiskid finish of size 60 x 120 cm
2764 Glazed Vitrified tiles Matt/Antiskid finish of size 80 x 80 cm
2765 Glazed Vitrified tiles Matt/Antiskid finish of size 80 x 120 cm
2766 Glazed Vitrified tiles Matt/Antiskid finish of size 120 x 120 cm
6001 White marble slab Makrana second quality plain veined 18 mm thick

6007 Pink marble slab plain 18 mm thick

6010 Udaypur green marble slab plain 18 mm thick
6019 Black Zebra marble slab plain 18 mm thick
7024 Acid Proof cement
7048 Rawl plug 50 mm (designation 10 nos)
7070 Chequered precast cement concrete tiles 22 mm thick using marble chips of size
6mm - Light shade using white cement

7071 White marble Raj Nagar plain 18 mm thick upto 0.50 sqm area
7077 Acid and alkali resistant tiles 300x300 mm size, 10 mm thick
7236 Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement

7237 Precast chequered cement tiles 22 mm thick medium shade

using 50% white cement 50% ordinary cement
7254 Hardening compound
7388 Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt
7800 Ceramic Glazed Tiles 1st quality minimum thickness 5mm in all colours shades
and designs except burgundy, bottle green, black

7801 Ceramic Glazed Tiles 1st quality 300 x 300 mm in all shades and designs of
White, Ivory, grey, Fume Red brown etc.

7802 Ceramic Glazed Tiles 1st quality 300 x 300 in all shades designs except White,
Ivory, Grey, Fume Red Brown etc.

7803 Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more in all shades
designs White, Ivory, Grey, Fume Red Brown etc.

7804 Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more in all shades
designs except White, Ivory, Grey, Fume Red Brown etc.

7850 Agaria White marble slab plain 18 mm thick

8620 Vitrified floor tile 50x50 cm conforming to IS 15622:2006 group (B1a)

8621 Vitrified floor tile 60x60 cm conforming to IS 15622:2006 group (B1a)

8622 Vitrified floor tile 80x80 cm conforming to IS 15622:2006 group (B1a)

8623 Vitrified floor tile 100x100 cm conforming to IS 15622:2006 group (B1a)

8624 "Border tiles 200x75mm size

8682 Epoxy Grout
8731 High polymer modified quickset tile adhesive
9977 Carriage
9988 Carriage and sundries
9999 Sundries
 quintal 160.00

each 740.00
each 145.00
each 210.00
each 70.00
each 3.00
sqm 690.00
sqm 400.00
sqm 460.00
sqm 525.00
sqm 550.00
sqm 750.00
sqm 700.00
sqm 500.00
sqm 700.00
sqm 650.00
sqm 880.00
sqm 1200.00
sqm 480.00
sqm 700.00
sqm 650.00
sqm 880.00
sqm 1400.00

sqm 1450.00

sqm 685.00
sqm 620.00
sqm 1000.00
tonne 7800.00
each 22.00

sqm 370.00

sqm 550.00
10 Nos 500.00

sqm 225.00

sqm 335.00

litre 36.00
each 10.00

sqm 190.00

sqm 175.00

sqm 300.00

sqm 340.00

sqm 400.00
sqm 950.00

sqm 500.00

sqm 560.00

sqm 900.00

sqm 1390.00

each 16.00
kg 380.00
kg 9.00
L.S. 2.12
L.S. 2.12
L.S. 2.12
 11.0 FLOORING
Code Description
No.
0004
11.1 Brick on edge flooring with bricks of class designation 7.5 on a bed of
Production
cost of 12 mm cement mortar, including filling the joints with same mortar, with common
concrete burnt clay non modular bricks:
by batch 11.1.1 1:4 (1 cement : 4 coarse sand)
mix plant
11.1.2 1:6 (1cement : 6 coarse sand)
11.2 Dry brick on edge flooring in required pattern with bricks of class
designation 7.5 on a bed of 12 mm mud mortar, including filling joints with
Jamuna sand, with common burnt clay non modular bricks.
11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate) finished with a floating coat of neat cement, including
cement slurry, but excluding the cost of nosing of steps etc. complete.
11.3.1 40 mm thick with 20 mm nominal size stone aggregate
11.4 52 mm thick cement concrete flooring with concrete hardener topping,
under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12
mm thick cement hardener consisting of mix 1:2 (1 cement hardener
mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening
compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's
specifications. This includes cost of cement slurry, but excluding the cost of
nosing of steps etc. complete.

11.5 62 mm thick cement concrete flooring with concrete hardener topping,

under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm nominal size) and top layer
12mm thick cement hardener consisting of mix 1:2 (1 cement hardener
mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening
compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s
specifications. This includes cost of cement slurry, but excluding the cost of
nosing of steps etc. complete.

11.6 Cement plaster skirting up to 30 cm height, with cement mortar 1:3

(1 cement : 3 coarse sand), finished with a floating coat of neat cement.
11.6.1 18 mm thick
11.7 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size), including finishing complete.

11.8 Extra for making chequers of approved pattern on cement concrete floors, steps,
landing, pavements etc.

TERRAZO FLOORING
11.9 40 mm thick marble chips flooring rubbed and polished to granolithic finish,
under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top
layer 6mm thick with white, black, chocolate, grey, yellow or green
Unit Rate

sqm 937.00
sqm 898.20

sqm 733.30

sqm 545.00

sqm 855.90

sqm 928.65

sqm 570.75

cum 7958.65

sqm 69.30
marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement
marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble pow
: 7 marble chips) by volume, including cement slurry etc. complete :

11.9.1 Dark shade pigment with ordinary cement

11.9.2 Light shade pigment with white cement
11.9.3 Medium shade pigment with 50% white cement and 50% ordinary
cement

0004 Production cost of concrete by batch mix plant

11.9.5 Light shade pigment with ordinary cement
11.9.6 Ordinary cement without any pigment
11.10 40 mm thick marble chips flooring, rubbed and polished to granolithic
finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top
layer 9 mm thick with white, black, chocolate, grey, yellow or green
marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement
marble powder mix 3:1 (3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume,
including cement slurry etc. complete.
11.10.1 Dark shade pigment with Ordinary cement
11.10.2 Light shade pigment with white cement
11.10.3 Medium shade pigment with 50% white cement and 50% ordinary
cement

11.10.4 White cement without any pigment

11.10.5 Light shade pigment with ordinary cement
11.10.6 Ordinary cement without any pigment
11.11 40 mm thick marble chips flooring, rubbed and polished to granolithic
finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top
layer 12 mm thick with white, black, chocolate, grey yellow or green
marble chips of sizes from 7 mm to 10 mm nominal size, laid in cement
marble powder mix 3:1 (3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by
volume, including cement slurry etc. complete :
11.11.1 Dark shade pigment with ordinary cement
11.11.2 Light shade pigment with white cement
11.11.3 Medium shade pigment with 50% white cement and 50% ordinary
cement

11.11.4 White cement without any pigment

11.11.5 Light shade pigment with ordinary cement
11.11.6 Ordinary cement without any pigment
portion of 4:7 (4 cement marble powder mix

sqm 917.50
sqm 947.30

sqm 929.00

sqm 925.75
sqm 913.70
sqm 889.85

sqm 946.90
sqm 989.45

sqm 963.30

sqm 955.35
sqm 941.50
sqm 907.45

sqm 979.90
sqm 1039.50

sqm 1002.90

sqm 992.25
sqm 972.30
sqm 925.05
 11.12 Marble chips skirting up to 30 cm height, rubbed and polished to
granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from
to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion o
cement marble powder mix : 7 marble chips) by volume :
11.12.1 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) :

11.12.1.1 Dark shade pigment with ordinary cement

11.12.1.2 Light shade pigment with white cement
11.12.1.3 Medium shade pigment with 50% white cement and 50%
ordinary cement

0004 Production cost of concrete by batch mix plant

11.12.1.5 Light shade pigment with ordinary cement
11.12.1.6 Ordinary cement without any pigment
11.13 Providing and fixing glass strips in joints of terrazo/ cement concrete
floors.
11.13.1 40 mm wide and 4 mm thick
11.14 Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width,
including cost of forming, nosing etc.

11.15 Crazy marble stone flooring, including filling the gaps with light shade pigment
with white cement marble powder mixture (3 parts of white
cement : 1 part of marble powder) by weight in proportion of 4:7 (4
cement marble powder mix : 7 white, black or white and black marble
chips of sizes from 1 mm to 4 mm nominal size by volume), with under
layer 25 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing
and cement slurry etc. complete :
11.15.1 18 mm thick crazy marble stone white, black or as specified
TILE FLOORING
11.16 Precast terrazo tiles 22 mm thick with graded marble chips of size upto
12 mm, laid in floors, and landings, jointed with neat cement slurry
mixed with pigment to match the shade of the tiles, including rubbing
and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1
cement:4 coarse sand) :
11.16.1 Light shade pigment using white cement
11.16.2 Medium shade pigment using 50% white cement and 50% ordinary
cement

11.16.3 Dark shade pigment using ordinary cement

11.16.4 Ordinary cement without any pigment
 to
or green marble chips of sizes from smallest
e powder) by weight in proportion of 4:7 (4

ent : 3 coarse sand) :

sqm 1563.70
sqm 1593.50

sqm 1575.20

sqm 1569.65
sqm 1559.90
sqm 1536.05

metre 79.50

sqm 80.45

sqm 1461.65

sqm 1309.90

sqm 1259.95

sqm 1218.65
sqm 1163.20
11.17 Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in
width.
11.18 Precast terrazo tiles 22 mm thick with graded marble chips of sizes
upto 12 mm, in skirting and risers of steps not exceeding 30 cm in
height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand),
jointed with neat cement slurry mixed with pigment to match the shade
0004 Production cost of concrete by batch mix plant
11.18.1 Light shade pigment using white cement
11.18.2 Medium shades pigment using 50% white cement and 50% ordinary
cement

11.18.3 Dark shade pigment using ordinary cement

11.18.4 Ordinary cement without any pigment
11.19 Chequered terrazo tiles 22 mm thick with graded marble chips of size
up to 6 mm in floors, jointed with neat cement slurry mixed with pigment
to match the shade of the tiles, including rubbing and polishing complete, on 20
mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :
11.19.1 Light shade pigment using white cement
11.19.2 Medium shade pigment using 50% white cement, 50% ordinary cement

11.19.3 Dark shade pigment using ordinary cement

11.19.4 Ordinary cement without any pigment
11.20 Chequerred precast cement concrete tiles 22 mm thick in footpath &
courtyard, jointed with neat cement slurry mixed with pigment to match
the shade of tiles, including rubbing and cleaning etc. complete, on 20
mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
11.20.1 Light shade pigment using white cement
11.20.2 Medium shade pigment using 50% white cement 50% Grey cement

11.20.3 Dark shade pigment using ordinary cement

11.20.4 Ordinary cement without any pigment
11.21 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved
make and colour using acid and/or alkali resisting mortar
bedding, and joints filled with acid and/or alkali resisting cement as per
IS : 4457, complete as per the direction of Engineer-in- Charge.
11.21.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof
cement : 4 coarse sand)
11.21.1.1 Acid and alkali resistant tile sqm 1515.45
11.21.2 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
11.21.2.1 Acid and alkali resistant tile sqm 1637.70
 sqm 102.10

sqm 2027.75

sqm 1968.45

sqm 1920.30
sqm 1850.45

sqm 1295.20

sqm 1312.10

sqm 1240.75
sqm 1185.30

sqm 1233.05

sqm 1160.00

sqm 983.95
sqm 928.50

1515.45
ent : 4 coarse sand)
1637.70
11.22 Tile work in skirting, risers of steps and dado up to 2 m height over 12
mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement
slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching
shade complete.

11.22.1 Marble tiles (polished) Raj Nagar

11.22.1.1 8 mm thick
STONE FLOORING
0004 Production cost of concrete by batch mix plant

11.23.1 Makrana white second quality

11.23.2 Raj Nagar plain
11.23.3 Agaria White
11.23.4 Black Zebra
11.23.5 Udaipur green marble
11.23.6 Pink plain marble
11.24 Extra for pre finished nosing to treads of steps of marble stone.
11.25 Extra for marble stone flooring in treads of steps and risers using single length up
to 2.00 metre.

KOTA STONE FLOORING

11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed
with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing
and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

11.26.1 25 mm thick
11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on
12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey
cement slurry mixed with pigment to match the shade of the slabs, including rubbing and
polishing complete.

SAND STONE FLOORING

11.28 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of
cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush.

11.28.1 Red sand stone

11.28.2 White sand stone
11.29 40 mm thick fine dressed stone flooring over 20 mm (average) thick
base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar
1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.

11.29.1 Red sand stone

 11.29.2 White sand stone
11.30 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement
mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement
mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and
pointing with same mortar.

11.30.1 Red sand stone

11.30.2 White sand stone
11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.

11.32 Extra for Kota stone/ sand stone in treads of steps and risers using single length
up to 1.05 metre.

WOODEN FLOORING
11.33 25 mm wooden planking, tongued and grooved in flooring, including fixing with
iron screws complete with :
11.33.1 Second class teak wood
11.33.2 Second class deodar wood
11.34 38 mm thick wood block flooring of first class teak wood laid over 25 mm thick
leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate
10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen
penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after
dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished
complete.

11.35 Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S.
flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided),
including necessary welding and applying a priming coat of approved primer on exposed
surface etc. complete.

CERAMIC GLAZED TILES

11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to
be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in
colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4
(1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including
pointing the joints with white cement and matching pigment etc.,
complete.
 sqm 1298.80

sqm 3377.45
sqm 1992.70
sqm 2608.15
sqm 2685.05
sqm 2100.40
sqm 2200.40
metre 593.30

sqm 701.50

sqm 1706.60

sqm 2038.55

sqm 988.35
sqm 1017.80

sqm 1193.30
 sqm 1222.75

sqm 1292.00
sqm 1321.45

metre 157.35

sqm 36.35

sqm 4187.95
sqm 2800.10

sqm 10543.40

kg 142.85

sqm 935.60
11.37A Providing and fixing 1st quality ceramic glazed floor tiles conforming to
IS : 15622 (thickness to be specified by the manufacturer ) of approved make in
all colours, shades except burgundy, bottle green, black of any size as approved
by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick
bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey
cement slurry @ 3.3kg per sqm including pointing in white cement mixed with
pigment of matching shade complete.

11.38 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to
be specified by the manufacturer), of 1st quality conforming to IS : 15622, of
approved make, in all colours, shades, except White, Ivory, Grey, Fume Red
Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse
sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the
joints with white cement and matching pigments etc., complete.

11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or
more (thickness to be specified by the manufacturer), of 1st quality conforming
to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red
Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand),
jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with
white cement and matching pigments etc., complete.

11.40 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or
more (thickness to be specified by the manufacturer), of 1st quality conforming
to IS : 15622, of approved make, in all colours, shades, except White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4
Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing
the joints with white cement and matching pigments etc., complete.
0004
Production
cost of
concrete by
batch mix
VITRIFIED FLOOR TILES
plant
11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS: 15622, of approved make, in all colours and shades, laid on
20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey
cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and
matching pigments etc., complete.

11.41.1 Size of Tile 500x500 mm

11.41.2 Size of Tile 600x600 mm
11.41.3 Size of Tile 800x800 mm
11.41.4 Size of Tile 1000x1000 mm
11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to
be specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS:15622, of approved brand & manufacturer, in all colours and
shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing
with grey cement slurry @3.3 kg/sqm including grouting the joints with white
cement and matching pigments etc. The tiles must be cut with the zero chipping
diamond cutter only . Laying of tiles will be done with the notch trowel, plier,
wedge, clips of required thickness, leveling system and rubber mallet for placing
the tiles gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

11.41A.1.1 Size of Tile 600 x 600 mm
11.41A.1.2 Size of Tile 800 x 800 mm
11.41A.1.3 Size of Tile 600 x 1200 mm
11.41A.1.4 Size of Tile 800 x 1600 mm
11.41A.1.5 Size of Tile 1000 x 1000 mm
11.41A.2 Glazed vitrified floor tiles polished finish of size
11.41A.2.1 Size of Tile 600 x 600 mm

11.41A.2.2 Size of Tile 600 x 1200 mm

11.41A.2.3 Size of Tile 800 x 800 mm
11.41A.2.4 Size of Tile 800 x 1200 mm
11.41A.2.5 Size of Tile 1200 x 1200 mm
11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size
11.41A.3.1 Size of Tile 600 x 600 mm

11.41A.3.2 Size of Tile 600 x 1200 mm

11.41A.3.3 Size of Tile 800 x 800 mm
11.41A.3.4 Size of Tile 800 x 1200 mm
11.41A.3.5 Size of Tile 1200 x 1200 mm
11.42 Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand)
bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.

11.43 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer
modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm
thickness.

11.44 Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1
cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with
ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having
specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto
6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing
and mixing water proofing material in mortar @ 1 kg

per 50 kg of cement, all complete as per direction of Engineer-in-charge.

sqm 938.50

sqm 1107.05

sqm 1142.80

sqm 1225.10

sqm 1334.35
sqm 1416.65
sqm 1879.95
sqm 2551.95
sqm 1286.60
sqm 1372.80
sqm 1407.05
sqm 1702.05
sqm 1633.45

sqm 1359.20

sqm 1612.75
sqm 1544.20
sqm 1859.60
sqm 2298.45

sqm 1311.05

sqm 1612.75
sqm 1544.20
sqm 1859.60
sqm 2572.75

sqm 735.30

sqm 633.60

sqm 815.45
 11.45 Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on
150 mm thick sub grade of compacted bed of 20 mm thick nominal size
stone aggregate and base course and filling with 150 mm thick jamuna
sand, including spreading, well ramming, consolidating and finishing smooth etc.
all complete as per direction of Engineer-in-charge.
11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and
0004 Production cost of concrete by batch mix plant
skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1
cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/
sqm including grouting the joint with white cement & matching pigments
etc. complete.
11.46.1 Size of Tile 500x500 mm
11.46.2 Size of Tile 600x600 mm
11.46.3 Size of Tile 800x800 mm
11.46.4 Size of Tile 1000x1000 mm
11.46A Providing and fixing glazed screen printed border tile 75mm wide having
thickness 5mm, of approved quality & make, in all shades, design and
prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 Cement :
3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm
including pointing with white cement mixed with pigment of matching shade, all
complete as approved by Engineer - in - Charge
11.47 Providing and laying Vitrified tiles in different sizes (thickness to be
specified by the manufacturer), with water absorption less than 0.08%
and conforming to IS: 15622, of approved brand & manufacturer, in all
colours and shade, in skirting, riser of steps, laid with cement based
high polymer modified quick set tile adhesive (water based) conforming
to IS: 15477, in average 6 mm thickness, including grouting of joints
(Payment for grouting of joints to be made separately).
11.47.1 Size of Tile 500x500 mm
11.47.2 Size of Tile 600x600 mm
11.47.3 Size of Tile 800x800 mm
11.47.4 Size of Tile 1000x1000 mm
11.48 Grouting the joints of flooring tiles having joints of 3 mm width, using
epoxy grout mix of 0.70 kg of organic coated filler of desired shade
(0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and
finishing complete as per direction of Engineer-in-charge.
11.48.1 Size of Tile 500x500 mm
11.48.2 Size of Tile 600x600 mm
11.48.3 Size of Tile 800x800 mm
11.48.4 Size of Tile 1000x1000 mm
11.49 Providing and laying Vitrified tiles in floor with different sizes (thickness
to be specified by the manufacturer), with water absorption less than 0.08% and conforming
to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement
based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477,
in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be
made separately).

11.49.1 Size of Tile 500x500 mm

11.49.2 Size of Tile 600x600 mm
11.49.3 Size of Tile 800x800 mm
11.49.4 Size of Tile 1000x1000 mm
11.50 Deduct for not grouting the joints with white cement and matching pigment in the
items of fixing of vitrified tiles.

11.51 Providing and laying machine cut, mirror polished, Italian Marble stone flooring
laid in required pattern in linear portion of the building all complete as per architectural
drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement
mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm
including pointing with white cement slurry admixed with pigment to match the marble shade
including rubbing, curing and polishing etc. all complete as specified and as directed by the
Engineer-in-Charge.

11.51.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red
or Dark Emperadore etc.

11.52 Providing and laying machine cut, mirror polished Marble stone flooring, in
required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian
marble stones of different colours, shades and finished surface texture etc., in linear portions
of the building, all complete as per the architectural drawings, with 18 mm thick stone slab
laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid
and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement
slurry admixed with pigment to match the marble shade, including rubbing, curing and
polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

11.52.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red
or Dark Emperadore etc.

11.53 Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20
mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of
Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of
approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate
is inclusive of all operation, material and required pattern approved by
Engineer-in-Charge:
11.54 Providing and fixing removable raised/false access flooring with system
and its components of approved make for different plenum height with possible height
adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I.
rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural
drawings, as specified and as directed by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made

out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully
welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of
the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with
GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on
the stud for level adjustment upto 50mm, locking and stabilizing the pedestal
head in position at the required level. The pedestals shall be fixed to the subfloor
(base) through base plate using epoxy based adhesive of approved make or the
machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized of rectangular
size 570x20x30x0.80mm thick having holes at both ends for securing the
stringers on to the pedestal head using fully threaded screws ensuring maximum
lateral stability in all directions, the grid formed by the pedestal and stringer
assembly shall receive the floor panel, this system shall provide adequate solid,
rigid support for access floor panel, the system shall provide a minimum clear
uninterrupted clearance between the bottom of the floor for electrical conduits
and wiring etc. all complete as per the architectural drawings, as specified and as
directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade
Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access
Floor panel shall be steel welded construction with an enclosed bottom pan with
uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel
Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum
64 welds in each dome and 20 welds along each flange). The panel should be
Corroresist epoxy coated for lifetime rust protection and cavity formed by the top
and bottom plate is filled with Pyrogrip noncombustible Portland cementitious
core mixed with lightweight foaming compound. The access floor shall be factory
finished with Anti-static High Pressure laminate with Non Warp technology upto
1mm thickness for superior adhesion and Surface flatness within 0.75mm.The
panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x
25mm without collapse in the centre of the panel which is placed on four steel
blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum
1250 kg/sqm and an impact load of 50kg all complete as per the approved
manufacturers specification and as per the direction of Engineer-in-charge.
All specification must be printed on the side of the panel to ensure the quality of
the product.

11.54.1 300 mm Finished Floor Height (FFH)

11.54.2 450 mm Finished Floor Height (FFH).
11.55 Providing and laying flamed finish Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
 coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including
rubbing, curing and polishing etc. all complete as specified and as
directed by the Engineer-in-Charge :
11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat
Eye or equivalent.

11.56 Providing and laying Polished Granite stone flooring in required design and
patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including
rubbing, curing and polishing etc. all complete as specified and as directed by the
Engineer-in-Charge.
11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or
equivalent

11.56.2 Polished Granite stone slab of all colour and texture except
Black, Cherry/Ruby Red sqm 2677.90
SUB HEAD : 12.0
ROOFING
247
 sqm 1613.00

sqm 1384.20
sqm 1466.50
sqm 1932.75
sqm 2604.75

metre 169.40

sqm 1593.85
sqm 1676.15
sqm 2142.40
sqm 2814.40

sqm 312.15
sqm 258.65
sqm 205.15
sqm 146.60
sqm 1455.10
sqm 1537.40
sqm 2003.65
sqm 2675.65

sqm 11.70

sqm 6095.50

sqm 6389.40

sqm 3282.50
sqm 5094.10
sqm 5407.15
 sqm 2589.90

sqm 3908.80

2677.90
 BASIC RATES (SH: 12.0 ROOFING)
Code Description
No.
0013 Machine for rubbing of floors

Bandhani
0004 Production cost of concrete by batch mix plant

0101 Bhisti
0102 Blacksmith 1st class
0103 Blacksmith 2nd class
0111 Carpenter 1st class
0112 Carpenter 2nd class
0114 Beldar
0115 Coolie
0116 Fitter (grade 1)
0117 Assistant Fitter or 2nd class Fitter
0122 Mason (for plaster of paris work) 1st class
0123 Mason (brick layer) 1st class
0124 Mason (brick layer) 2nd class
0128 Mate
0130 Mistry
0131 Painter
0139 Skilled Beldar (for floor rubbing etc.)
0155* Mason (average)
0222 Seam bolts and nuts 6 mm dia and 25 mm long
0223 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
corrugated sheet 6 mm thick
0224 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement close
fitting adjustable ridge
0225 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
corrugate serrated adjustable ridge
0226 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement plain
wing adjustable ridge
0227 Fibre (high impact poly propelene reinforced) cement unserrated adjustable
ridge for hips
0228 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
corrugated apron piece
0229 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement eaves
filler piece
0230 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement north
light curves
0231 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
ventilator curves
0232 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement barge
boards boards 6 mm thick

0233 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement ridge
finial
0234 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
special north light curves
0235 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement S type
louvers
0236 Multi purpose fibre reinforced by organic fibres and/or inorganic synthetic fibres
cement board 6 mm thick
0242 6 mm thick mulitipurpose cement bonded wood particle board conforming to IS :
14276
0295 Stone Aggregate (Single size) : 20 mm nominal size
0297 Stone Aggregate (Single size) : 10 mm nominal size
0308 Bhusa
0309 Paving bitumen of grade VG-10 of approved quality
0314 Bitumen hot sealing compound : grade A
0328 White face insulating board: 12 mm thick
0332 Natural colour insulating board: 12 mm thick
0336 Flame retardant face insulating board: 12 mm thick
0341 Flat pressed 3 layer particle board (medium density) Grade 1, 12 mm thick

0367 Portland Cement (OPC-43 Grade)

0368 White Cement
0370 Coal (steam)
0452 Brass screws 25 mm
0637 Bright finished or black enameled mild steel screws 40 mm
0765 Hessian cloth
0771 Kerosene oil
0811 Mud (dry)
0845 Roofing paint for iron sheets in red colour
0865 Pig lead
0869 Plaster of Paris
0870 Plug
0875 Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment

0886 Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia

0966 Sand Cast iron plain shoe 150 mm dia

0982 Coarse sand (zone III)
0992 Galvanised steel plain sheets
0994 Standard quality hard board sheet 3 mm thick
0996 Standard quality hard board sheet 4.5 mm thick
1001 Spun yarn
1008 Flats up to 10 mm in thickness
1015 Mild steel expanded metal 20x60 mm strands 3.25 mm wide
1.60 mm thick
1022 Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots

1023 Galvanised steel J or L hooks 8 mm dia

1024 Galvanised steel bolts & nuts 10 mm dia and 125 mm long round head with slots

1025 Mild steel bolts 6 mm dia and 25 mm long with hexagonal head
1031 Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded
with 4 galvanised steel nuts
1032 Galvanised steel bolts 10 mm dia and 7 cm long with nuts
1174 Red sand stone slab 45 mm to 50 mm thick (un-dressed)
1175 White sand stone slab 45 mm to 50 mm thick (un-dressed)
1190 Second class teak wood in planks
1196 First class kail wood in planks
1204 Precast heat resistant terrace tiles (size 300x300 mm) and 20 mm thick

1207 G.I. Limpet washer

1208 Bitumen washer
1209 G.I. plain washer thick
1210 G.I. plain washer thin
1211 G.I. plain washer for seam bolts
1213 Water proofing materials
1219 M.S. Wire nails
1220 M.S. Wire mesh (rabbit)
1331 M.S. Holder bat clamp of approved design for 100 mm S.C.I. pipe
1984 Common burnt clay F.P.S. bricks tile class designation 10
2202 Carriage of Stone aggregate below 40 mm nominal size
2203 Carriage of Coarse sand
2204 Carriage of Timber
2205 Carriage of Steel
2207 Carriage of Brick tiles
2209 Carriage of Cement
2211 Carriage of Tar / Bitumen
2216 Carriage of Stone blocks white & red sand stone & kota stone slab
2273 Carriage of A.C.sheet and accessories
2302 Carriage of G.I. sheet and accessories

2308 Carriage of Plaster of paris

3002 Polyvinyl chloride sheet 400 micron thick
3004 Stone ware spouts 100 mm dia 60 cm long
3050 Galvanised steel corrugated sheets
3051 Aluminium troughed profile sheet 0.56mm thick with center to center pitch of 200
mm, depth of 32 mm, overall profile width 1092 mm, cover width 1000mm)

3052 Aluminium troughed profile sheet 0.71mm thick with center to center pitch of 200
mm, depth of 32 mm, overall profile width 1092 mm, cover width 1000mm

3053 Aluminium troughed profile sheet 0.91mm thick with center to center pitch of 200
mm, depth of 32 mm, overall profile width 1092 mm, cover width 1000mm

3054 Aluminium profile sheet 0.56mm thick with center to center pitch of 175 mm,
depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall
profile width of 1144mm, cover width 1050mm

3055 Aluminium profile sheet 0.71mm thick with center to center pitch of 175 mm,
depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall
profile width of 1144mm, cover width 1050mm

3056 Aluminium profile sheet 0.91mm thick with center to center pitch of 175 mm,
depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall
profile width of 1144mm, cover width 1050mm

3057 Aluminium Circular(sinusoidal) profile sheet 0.56mm thick with center to center
pitch of 75 mm, depth of 19 mm, overall profile width 1250mm,cover width
1150mm

3058 Aluminium Circular(sinusoidal) profile sheet 0.71mm thick with center to center
pitch of 75 mm, depth of 19 mm, overall profile width 1250mm,cover width
1150mm

3059 Aluminium Circular(sinusoidal) profile sheet 0.91mm thick with center to center
pitch of 75 mm, depth of 19 mm, overall profile width 1250mm,cover width
1150mm

3060 Precoated Aluminium troughed profile sheet 0.56mm thcik with center to center
pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width
1000mm

3061 Precoated Aluminium troughed profile sheet 0.71mm thick with center to center
pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width
1000mm

3062 Precoated Aluminium troughed profile sheet 0.91mm thick with center to center
pitch of 200 mm, depth of 32 mm, overall
profile width1092 mm, cover width 1000mm

3063 Aluminium color coated profile sheet 0.56mm thick with center to center pitch of
175 mm, depth of 46mm, top crest width of 41mm,
bottom valley width of 80mm, overall profile width of 1144mm, cover

width 1050mm
3064 Aluminium color coated profile sheet 0.71mm thick with center to center pitch of
175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm,
overall profile width of 1144mm, cover width 1050mm

3065 Aluminium color coated profile sheet 0.91mm thick ith center to center pitch of
175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm,
overall profile width of 1144mm, cover width 1050mm

3066 Aluminium profile sheet 0.56mm thick with center to center pitch of
177.5 mm, depth of 28.5 mm, 987mm overall profile width, cover width 900mm

3067 Aluminium profile sheet 0.71mm thick with center to center pitch of
177.5 mm, depth of 28.5 mm, 987mm overall profile width, cover width 900mm

3068 Precoated/Mill finish Aluminium plain ridges 0.71 mm TCT/plain and 500- 600
mm wide
3069 Precoated/Mill finish Aluminium flashings/aprons 0.50mm TCT/plain and wide
upto 600 mm
3070 Precoated/Mill finish Aluminium plain north light cuves
3071 Precoated/mill finish aluminium Barge board (Upto 200 mm)
3072 Precoated/Mill finish Aluminium crimp curve
3073 Precoated/Mill finish Aluminium gutter
3074 Stainless steel self tapping screw of 6x50mm with SS hex cap and 3mm thick
EPDM seal
4009 Mild steel tubes hot finished welded type
4202 Red oxide Zinc chromate primer
7009 12.5 mm thick tapered edge plain gypsum plaster borad confirming to IS 2095
(Part 1):2011
7010 Galvanised Steel ceiling section (size 80x26x0.50 mm)
7011 Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm)
7012 Galvanised Steel intermediate Channel (Size 15x45x15x0.90 mm)
7013 Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50 mm)
7014 Galvanised Steel connecting clips (2.64 mm dia and 230 mm long GI wire)

7015 Galvanised Steel soffit cleat (Size 27x37x25x0.60 mm)

7016 Joint filler
7017 Joint finisher
7018 Joint tape roll
7019 Dash fastener / Chemical fastener
7020 All drive screws (for gypsum board)

7021 Primer (for gypsum board)

7028 12.5 mm thick Fully Perforated gypsum board
7031 12.5 mm thick tapered edge moisture resistant plain gypsum plaster board
confirming to IS 2095 (Part 1):2011
7050 PU Primer
7051 40 mm (average) PU spray having 40-45 kg/m3 density
7052 GI wire netting 3/4" x 24 G
7053 400 G polythene sheet
7090 Expanded polystyrene type N- Normal 50 mm thick
7091 Expanded polystyrene type - SE 50 mm thick
7187 C.I. grating 150 mm dia, weighing not less than 440 gm
7188 U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia

7189 U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia

7190 U-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 75 mm dia

7191 U-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 110 mm dia

7192 uPVC coupler for UPVC drainage pipes 75 mm

7193 uPVC coupler for UPVC drainage pipes 110 mm
7194 uPVC pushfit coupler (single) 75 mm thick
7195 uPVC pushfit coupler (single) 110 mm thick
7196 uPVC single equal Tee (without door) 75x75x75 mm
7197 uPVC single equal Tee (without door) 110x110x110 mm
7198 uPVC single equal Tee (with door) 75x75x75 mm
7199 uPVC single equal Tee (with door) 110x110x110 mm
7208 UPVC bend 87.5° 75 mm bend
7209 UPVC bend 87.5° 110 mm bend
7212 UPVC plain shoe 75 mm
7213 UPVC plain shoe 110 mm
7214 UPVC pipe clip 75 mm
7215 UPVC pipe clip 110 mm
7231 Resin Bonded Glass wool 16 kg/m³ : 50 mm thick
7232 Resin Bonded Glass wool 24 kg/m³ : 50 mm thick
7238 High Albedo paint
7266 Pressed clay tiles 20mm thick 250x250 mm size
7267 Plain ceiling tiles (BWP type phenol formaldehyde synthetic resin bonded)
(600x600x12 mm)
7268 Semi perforated ceiling tiles (600x600x12 mm)
7273 Resin Bonded Rockwool 48 kg/m3
7385 3 mm thick translucent white acrylic plastic sheet
7386 12 mm thick particle board ceiling tile
7388 Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt
7857 P.T.M.T. Grating square slit 150 mm
7904 Machine moulded common burnt clay tile bricks of class designation 12.5

8589 Calcium Silicate tegular edged celling tiles 595x595 mm and 15 mm thick on
edges
8590 Galvanised Steel main Tee ceiling section Size 24x38x0.33 mm (3 metre long)

8591 Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm (3.00 metre long)

8592 Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33mm (1.2 metre
long)
8593 Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33mm (0.6 metre
long)
8594 Galvanised Steel soffit cleat size 25x35x1.60 mm
8595 Wooden screws with plastic rawl plugs 35x8 mm
8597 GI Metal Tile Clip in Plain Beveled edge global white colour tiles of size 600x600
mm and 0.5 mm thick
8598 GI Metal Tile Clip in Perforated Beveled edge global white colour tiles of size
600x600 mm and 0.5 mm thick
8599 GI Metal Tile Lay-in Plain Tegular edge global white color tiles of Size 595x595
mm and 0.5 mm thick
8600 GI Metal Tile Lay-in Perforated Tegular edge global white color tiles of Size
595x595 mm and 0.5 mm thick
8601 PVC Laminated Gypsum Tiles (Square edge) of Size 595x595 mm and 12.5 mm
thick
8602 Gypsum Tiles Fully Perforated Square edge of Size 595x595 mm and 12.5 mm
thick
8604 Spring T-section 24x34x0.45 mm (3.00 meter long)
8605 C Wall angle section 20x30x20x0.50 mm (3.00 meter long)
8606 Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long)
8607 Spring T-connector
8608 C Carrier Connector
8609 C Suspension Clip
8610 Wire Coupling Clip
8611 Main T ceiling sections 24x38x0.3 mm (3 metre long)
8612 Perimeter wall angle 24 x 24 x 0.3 mm (3 metre long)
8613 Intermediate cross T-Section 24x25x0.3 mm (1.2 m long)

8614 Intermediate cross T-Section 24x25x0.3 mm (0.6 m long)

8615 Hanger rod 4 mm thick
8616 Adjustment clip 85x30x0.8 mm
8617 Soffit cleat (Size 27x37x25x1.60 mm)
8618 Dash fastener 6 mm dia 50 mm long
8667 UV stabilised 2 mm thick plain FRP sheet
8668 UV stabilised 2 mm thick corrugated FRP sheet
8669 Mangalore ridge tiles 20 mm thick
8670 Mangalore tiles 20 mm thick
8671 Precoated galvanised iron profile sheet 0.50 mm TCT
8672 Precoated galvanised steel plain ridges 0.50 mm TCT and 500-600mm wide

8673 Precoated galvanised steel flashings/aprons 0.50 mm TCT and upto 600mm
wide
8674 Precoated galvanised steel gutter 600mm overall girth
8675 Precoated galvanised steel north light curves
8676 Precoated galvanised steel barge board (upto 300mm )
8677 Precoated galvanised steel crimp curve
8699 8 mm thick tapered edge calcium silicate board
8784 8 mm thick Calcium silicate perforated tiles of size 595 x595 mm
9977 Carriage
9988 Carriage and sundries
9999 Sundries
0 ROOFING)
Unit Rate

day 300.00

day 714.00
day 714.00
day 784.00
day 714.00
day 784.00
day 714.00
day 645.00
day 645.00
day 784.00
day 714.00
day 784.00
day 784.00
day 714.00
day 714.00
day 784.00
day 714.00
day 714.00
day 749.00
10 Nos 10.00

sqm 225.00

metre 210.00

metre 210.00

metre 210.00

metre 210.00

metre 200.00

each 175.00

metre 280.00

each 310.00
 metre 400.00

pair 165.00

each 555.00

each 260.00

sqm 210.00

sqm 195.00

cum 1400.00
cum 1350.00
quintal 500.00
tonne 25614.00
kg 29.00
sqm 235.00
sqm 210.00
sqm 320.00

sqm 288.00

tonne 5000.00
tonne 11200.00
quintal 440.00
100 Nos 100.00
100 Nos 60.00
sqm 35.00
litre 50.00
cum 165.00
litre 120.00
kg 130.00
kg 5.00
each 10.00

kg 60.00

each 45.00

each 285.00
cum 1500.00
quintal 5000.00
sqm 135.00
 sqm 210.00
kg 50.00
quintal 4850.00

sqm 280.00

10 Nos 38.00

10 Nos 120.00

each 9.00

10 Nos 10.00

each 20.00

each 6.00
sqm 260.00
sqm 280.00
10 cudm 791.00
10 cudm 300.00

sqm 409.00

100 Nos 21.00

100 Nos 30.00
100 Nos 35.00
100 Nos 21.00
100 Nos 32.00
kilogram 35.00
kilogram 58.00
sqm 42.00
each 30.00
1000 Nos 4600.00
cum 163.93
cum 163.93
cum 187.35
tonne 145.72
1000 Nos 262.29
tonne 145.72
tonne 163.93
tonne 145.72
tonne 145.72
tonne 145.72

tonne 145.72
sqm 45.00
 each 45.00
quintal 6000.00

sqm 549.00

sqm 698.00

sqm 895.00

sqm 730.00

sqm 924.00

sqm 1182.00

sqm 520.00

sqm 670.00

sqm 870.00

sqm 636.00

sqm 809.00

sqm 1038.00

sqm 846.00
 sqm 1071.00

sqm 1370.00

sqm 680.00

sqm 872.00

metre 564.00

metre 544.00

metre 584.00
metre 487.00
sqm 538.00
metre 725.00

100 Nos 500.00

kg 60.00
litre 120.00

sqm 140.00

metre 46.00
metre 22.00
metre 38.00
metre 12.00

each 4.00

each 3.00
kg 24.00
kg 21.00
roll 90.00
each 12.50
100 Nos 58.00

litre 70.00
sqm 380.00
 sqm 250.00

sqm 50.00
sqm 350.00
sqm 26.00
sqm 12.00
sqm 120.00
sqm 140.00
each 27.00

metre 70.00

metre 130.00

each 8.00

each 11.00

each 18.00
each 39.00
each 18.00
each 32.00
each 46.00
each 81.00
each 59.00
each 92.00
each 35.00
each 59.00
each 27.00
each 47.00
each 15.00
each 14.00
sqm 90.00
sqm 130.00
kg 215.00
1000 Nos 8000.00

each 105.00

each 100.00
sqm 110.00
sqm 490.00
sqm 95.00
each 10.00
 each 45.00

1000 Nos 4600.00

sqm 685.00

each 140.00

each 90.00

each 45.00

each 22.00

each 4.50
each 1.00

sqm 710.00

sqm 800.00

sqm 625.00

sqm 735.00

sqm 880.00

sqm 380.00

metre 220.00
metre 110.00
metre 130.00
each 5.00
each 12.00
each 10.00
each 10.00
each 130.00
each 80.00
each 40.00

each 20.00
each 10.00
each 6.00
each 5.00
each 10.00
sqm 450.00
 sqm 525.00
each 8.00
each 8.00
sqm 375.00

metre 225.00

metre 235.20

metre 440.00
metre 240.00
metre 230.00
sqm 235.00
sqm 270.00
sqm 850.00
L.S. 2.12
L.S. 2.12
L.S. 2.12
 12.0 ROOFING
Code Description
No.

SHEET ROOFING

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed
0004 Production cost of concrete by batch mix plant

with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen
and G.I. limpet washers or with G.I. limpet washers filled with white lead,
including a coat of approved steel primer and two coats of approved paint on
overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved
surfaces), excluding the cost of purlins, rafters and trusses and including cutting
to size and shape wherever required.

12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m²
12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m²
12.1.3 0.63 mm thick with zinc coating not less than 275 gm/ m²
12.2 Extra for straight cutting in C.G.S. sheet roofing for making opening of area
exceeding 40 sq. decimeter for chimney stacks, sky light etc.:

12.2.1 1.00 mm thick

12.2.2 0.80 mm thick
12.2.3 0.63 mm thick
12.3 Extra for circular cutting in C.G.S. sheet roofing for making opening of area
exceeding 40 sq. decimeter:

12.3.1 1.00 mm thick

12.3.2 0.80 mm thick
12.3.3 0.63 mm thick
12.4 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with
polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen
washers complete.

12.4.1 0.80 mm thick with zinc coating not less than 275 gm/m²
12.4.2 0.63 mm thick with zinc coating not less than 275 gm/m²
12.5 Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer
coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers
complete :

12.5.1 1.60 mm thick with zinc coating not less than 350 gm/m²
12.6 Providing and fixing of 40 cm overall width plain G.S. sheet fixed with polymer
coated J or L hooks, bolts and nuts, G.l. limpet and bitumen washer complete,
bent to shape and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse
sand).

12.6.1 1.00 mm thick with zinc coating not less than 275 gm/m²
 Unit Rate

sqm 1320.35
sqm 1135.45
sqm 978.00

metre 95.60
metre 76.50
metre 76.50

metre 552.85
metre 441.60
metre 441.60

metre 822.15
metre 750.85

metre 1370.40

metre 700.20
12.7 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain
G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including
making necessary connections with rain water pipes complete.

12.7.1 0.80 mm thick with zinc coating not less than 275 gm/m²
12.7.2 0.63 mm thick with zinc coating not less than 275 gm/m²
12.8 Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6
mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer
coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self
drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and
trusses), including cutting sheets to size and shape wherever required.

0004 Production cost of concrete by batch mix plant

12.10 Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic
fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of
area exceeding 40 square decimeter.

12.11 Extra for providing and fixing wind ties of 40x 6 mm flat iron section.
12.12 Providing and fixing ridges and hips in fibre cement reinforced by organic fibres
and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling
fastener and EPDM washer etc. complete.

12.12.1 Corrugated serrated adjustable ridges

12.12.2 Plain wing adjustable ridges
12.12.3 Close fitting adjustable ridges
12.12.4 Unserrated adjustable hips
12.13 Providing and fixing fibre cement reinforced by organic fibres and/or inorganic
synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and
nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling
fastener and EPDM washer etc. complete:

12.13.1 Corrugated apron pieces

12.13.2 Eave's filler pieces
12.13.3 North light curves
12.13.4 Ventilator curves
12.13.5 Barge boards
12.13.6 Ridge finials
12.13.7 Special north light curves
12.13.8 S type louvers
12.14 Providing flat iron brackets 50x3 mm size with necessary bolts,
nuts and washers etc. for fixing G.S. sheets gutters with purlins. metre 77.00
12.15 Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a
per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soake
12.15.1 With residual type petroleum bitumen of grade VG -10 sqm 133.15
12.16 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated a
mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dun
bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing c
and finished neat:
12.16.1 With common burnt clay F.P.S.(non modular) brick tile
of class designation 10 sqm 905.80
12.17 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated an
mud mortar with bhusha @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow-dung) an
moulded tile bricks, grouted with cement mortar 1:3 ( 1 cement : 3 fine sand) mixed with 2% of integral wa
weight of cement and finished neat.
12.17.1 With machine moulded common burnt clay F.P.S. (non modular) brick tiles of class designatio
conforming to IS 2690 sqm 905.80
12.18 Extra for every additional 1 cm thickness of mud phaska. sqm 20.3
12.19 Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement :
integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement
12.19.1 With common burnt clay F.P.S. (non modular) brick tiles
of class designation 10 sqm 549.05
12.20 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of a
with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid
cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.

sqm 620.00
12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggre
including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

12.21.1 In 75x75 mm deep chase metre 260.2

metre 811.85
metre 752.45

sqm 462.10

metre 76.50

metre 211.25
metre 163.65

metre 444.75
metre 444.75
metre 498.60
metre 443.75

metre 364.40
metre 296.25
metre 493.55
metre 535.95
metre 631.20
pair 262.40
each 878.55
metre 476.70
 olts,
metre 77.00
7kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm
y with a piece of cloth lightly soaked in kerosene oil complete :
sqm 133.15
n roofs laid to slope consolidated and plastered with 25 mm thick
ping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile
with 2% of integral water proofing compound by weight of cement

905.80
n roofs laid to slope consolidated and plastered with 25 mm thick
with mix 1:1 (1 clay : 1 cow-dung) and covered with machine
sand) mixed with 2% of integral water proofing compound by

dular) brick tiles of class designation 12.5,

905.80
sqm 20.35
with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of
yer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat:

549.05
ttern 20 mm nominal thickness of approved size) on roofs jointed
gral water proofing compound, laid over a bed of 20 mm thick
ete.

sqm 620.00
ent : 2 coarse sand : 4 stone aggregate 10 mm and down gauge),
per standard design :

metre 260.20
12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm
nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster
1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making
and finishing the outlet complete.

12.23 Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1
cement : 4 coarse sand) over wooden karries or
R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to
be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3
fine sand ) complete :

12.23.1 Red sand stone slab

12.23.1.1 40 to 50 mm thick
0004 Production cost of concrete by batch mix plant
12.23.2.1 40 to 50 mm thick
CEILING
12.24 Providing and fixing insulating board ceiling of approved quality with necessary
nails etc. complete (frame work to be paid separately) :
12.24.1 Natural colour insulating board
12.24.1.1 12 mm thick
12.24.2 White face insulating board
12.24.2.1 12 mm thick
12.24.3 Flame retardant face insulating board
12.24.3.1 12 mm thick
12.25 Providing and fixing flat pressed 3 layer medium density particle board or graded
particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete
(frame work to be paid separately):

12.25.1 12 mm thick
12.26 Providing and fixing plain multipurpose cement board(Hight pressure steam
cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to
be paid seperatately).
12.26.1 6 mm thick Cement fiber board as per IS: 14862
12.26.2 6 mm thick Cement bonded wood particle board as per IS:14276

12.27 Extra for Circular cutting including wastages in ceiling with:

12.27.1 2nd class teak wood planks 20 mm thick
12.27.2 Natural colour insulating board
12.27.2.1 12 mm thick
12.27.3 White face insulating board:
12.27.3.1 12 mm thick
each 266.60

sqm 907.95

sqm 937.35

sqm 774.15

sqm 810.90

sqm 936.00

sqm 888.20

sqm 773.40

sqm 751.30

metre 635.00

metre 402.55

metre 407.15
 12.27.4 Flame retardant face insulating board:
12.27.4.1 12 mm thick
12.27.5 Standard quality hard board sheet:
12.27.5.1 3 mm thick
0004 Production cost of concrete by batch mix plant
12.28 Extra for providing and fixing ceiling to curved surfaces in narrow widths

12.31 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a

height of 5 m above floor level, over first class kail wood strips 25x6 mm with
10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden
frame (frame work to be paid separately):

12.31.1 Flat surfaces

12.31.2 Curved surfaces
12.32 Extra for sunk or raised mouldings in the plaster of Paris (Gypsum
anhydrous) ceiling.

12.33 Extra for providing plaster of Paris (Gypsum anhydrous) ceiling above 5
metres height from floor level.

12.34 Providing fixing thermal insulation of ceiling (under deck insulation) with
Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3,
50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with
metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24
gauge wire mesh, for top most ceiling of building.

12.35 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool
conforming to IS: 8183. Density 16 kg/m³, 50 mm thick, wrapped in 200G
Virgin Polythene bags placed over existing false ceiling and held in position
by criss-crossing GI wire.

12.36 Thermal Insulation of roofing with Expanded polystyrene fixed with suitable
adhesive to the false ceiling as per the directions of the Engineer-in-charge:

12.36.1 With Type N - Normal 50 mm thick

12.36.2 With Type SE - Self Extinguishing type 50 mm thick
RAIN WATER SPOUT AND PIPE
12.37 Providing and fixing 100 mm diameter and 60 cm long rain water spout in
cement mortar 1:4 (1 cement : 4 fine sand).
12.37.1 Stone ware spout
12.38 Providing and fixing M.S. holder bat clamps of approved design to
C.I. or S.C.I. rain water pipes embedded in and including cement concrete
blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) and cost of cutting holes and making good
the walls etc. :

12.38.1 100 mm diameter

12.38.2 150 mm diameter
 metre 422.70

metre 388.70
metre 402.50

sqm 373.00

sqm 1421.25
sqm 1708.05

sqm 485.75

sqm per metre

height 218.90

sqm 597.85

sqm 242.80

sqm 276.85
sqm 306.30

each 142.10

each 308.45
each 328.55
12.39 Providing lead caulked joints to sand cast iron rain water pipes and
fittings:
12.39.1 100 mm dia Pipe
12.39.2 150 mm dia Pipe
12.40 Providing, fixing and embedding sand cast iron accessories for rain water pipes in
the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of
masonry (lead caulking will be paid for separately):

0004 Production cost of concrete by batch mix plant

12.40.1.1 150 mm diameter
12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,
leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.

12.41.1 75 mm diameter
12.41.2 110 mm diameter
12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,
including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal
expansion.

12.42.1 Coupler
12.42.1.1 75 mm
12.42.1.2 110 mm
12.42.2 Single pushfit Coupler
12.42.2.1 75 mm
12.42.2.2 110 mm
12.42.3 Single tee with door
12.42.3.1 75x75x75 mm
12.42.3.2 110x110x110 mm
12.42.4 Single tee without door
12.42.4.1 75x75x75 mm
12.42.4.2 110x110x110 mm
12.42.5 Bend 87.5°
12.42.5.1 75 mm bend
12.42.5.2 110 mm bend
12.42.6 Shoe (Plain)
12.42.6.1 75 mm Shoe
12.42.6.2 110 mm Shoe
12.43 Providing and fixing unplasticised -PVC pipe clips of approved design
to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs,
screwed with M.S. screws of required length, including cutting brick work and fixing in cement
mortar 1:4 (1 cement
: 4 coarse sand) and making good the wall etc. complete.
 12.43.1 75 mm
12.43.2 110 mm
12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm
diameter and weighing not less than 440 grams.

12.45 Providing and fixing false ceiling at all height including providing and fixing of
frame work made of special sections, power pressed from
M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS :
277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm
and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener
12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers
of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle
hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200
mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with
tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be
fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out
of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels
0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling
fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall
screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter
channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing
and finishing to a flush finish of tapered and square edges of the board with recommended
jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto
150 mm on both sides of joint and two coats of primer suitable for board, all as per
manufacturer's specification and also including the cost of making openings for light fittings,
grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as
per drawings, specification and direction of the Engineer in Charge but excluding the cost of
painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to

IS: 2095- (Part I) :2011 (Board with BIS certification marks)

12.45.2 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board
conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks)

12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board

12.45.4 Fully Perforated Gypsum Plaster Board of size 1200 x

2400x12.5 mm having approx. 15 % perforated area with perforation size and
pattern as approved by the Engineer- in-charge and as per manufacturer's
specification, with all 4 side tapered and backed by acoustical tissue with NRC
value not less than 0.60
12.46 Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering
Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not
less than 100 gms.

12.47 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to
any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I
plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The
sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3%
ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They
shall be of uniform pigmentation and thickness without air pockets and shall conform to IS
10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured
or smooth as specified.

12.47.1 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or

6" ) as specified

12.47.2 2 mm thick flat

12.48 Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work complete
(steel frame work to be paid separately).

12.49 Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm
thickness and of approved pattern on steel frame work complete (steel frame work to be paid
separately).

12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and
pitch of corrugation as approved by Engineer-in-charge)
0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS:
277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns
minimum to avoid scratches during transportation and should be supplied in single length
upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self
drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and
including cutting to size and shape wherever required.

12.51 Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in
240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top
coat 15-18 microns using self drilling/ self tapping screws complete :

12.51.1 Ridges plain (500 - 600mm)

each 444.05
each 604.65

each 431.10

metre 213.00
metre 319.75

each 79.80
each 119.95

each 79.80
each 110.60

each 141.55
each 205.45

each 124.20
each 190.75

each 91.80
each 132.00

each 81.10
each 115.95
each 310.85
each 309.50

each 47.90

sqm 1145.95

sqm 1286.45

sqm 1300.50

sqm 1483.15
each 72.00

sqm 1179.25

sqm 1048.50

sqm 346.65

sqm 77.75

sqm 671.55

metre 450.60
 12.51.2 Flashings/ Aprons.( Upto 600 mm)

12.51.3 North light curves

12.51.4 Barge board (Upto 300 mm)
12.51.5 Crimp curve
0004 Production cost of concrete by batch mix plant
12.52 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in
true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel
sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner
with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm
thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm
made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm
center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm
and size 24x25 mm made of
0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to
form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles
of approved texture in the grid including, required cutting/making, opening for services like
diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended
from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm
dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level
clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom
exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all
complete for all heights as per specifications, drawings and as directed by Engineer-in-
charge.

12.52.1 GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of
size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having
galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester
powder coated of thickness 60 microns (minimum), including factory painted after
bending.

12.52.2 GI Metal Ceiling Lay in perforated Tegular edge global white color
tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet
having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation
area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of
0.5, electro statically polyester powder coated of thickness 60 microns
(minimum), including factory painted after bending and perforation, and backed
with a black Glass fiber acoustical fleece.

12.52.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size
595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum
as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC
film on the face side and 12micron metalized polyester on the back side with
all edges sealed with
metre 412.85

metre 465.25
metre 384.20
sqm 422.50
metre 1110.60

sqm 1591.70

sqm 1746.25
 the face side PVC film which goes around and wraps
the edges and is bonded to the edges and the back side metalized
polyester film so as to make the tile a completely sealed unit.

12.52.4 12.5 mm thick fully Perforated Gypsum Board tile made from
plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595
mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48
mm and the side borders of 30 mm, backed with non woven tissue on the back
side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin
bonded glass wool backing.

12.53 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight
calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal
level, suspended on inter locking metal grid of hot dipped galvanised steel sections
(galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably
spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick
(minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made
out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre
to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size
24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x
600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a
Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick
(minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry
wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate
ceiling tiles of approved texture in the grid, including, cutting/ making opening for
services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required.
Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm
fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods
with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to
centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with
polyster baked paint, for all heights, as per specifications, drawings and as directed by
Engineer-in-Charge.

Note :- Only calcium silicate false ceiling area will be measured from wall to
wall. No deduction shall be made for exposed frames/opening (cut outs)
having area less than 0.30 sqm.The calcium silicate ceiling tile shall have
NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per
B.S. 476 part IV, 100% humidity resistance and also having thermal
conductivity <0.043 w/mK.
0004 Production cost of concrete by batch mix plant

12.54.1 GI Metal Ceiling Clip in plain Beveled edge global white color tiles of
size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having
galvanizing of 100 gms/ sqm (both sides inclusive) and electro statically polyester
powder coated of thickness 60 microns (minimum), including factory painted after
bending.

12.54.2 GI Metal Ceiling Clip in plain Beveled edge global white color tiles of
size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having
galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with
1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder
coated of thickness 60 microns (minimum), including factory painted after
bending and perforation.

12.55 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm)
with SRI (solar refractive index) > 78, solar reflection
> 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20
mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the
joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and
polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height
along the parapet walls in the same manner.

12.56 Providing and laying roof insulation with 40 mm thick impervious sprayed, closed
cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III
(density of foam being 40-45 kg/ cum), over a coat of polyurethane primer applied @ 6-8 sqm
per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40
mm thick cement screed 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal
size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G
wire netting and sealing the joints with polymerized mastic, all complete as per direction of
Engineer-in-Charge.
12.57 Providing and fixing thermal insulation with Resin Bonded Fibre glass
wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin
Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss
crossing GI wire etc. complete as per directions of Engineer-in-Charge.

12.58 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm
in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel
sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner
with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm
thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm
made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm
center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm
and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of
the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm
and laying false ceiling tiles of approved texture in the grid including, required cutting/making,
opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T"
runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm
fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods
with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to
center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted
with polyester paint, all complete for all heights as per specifications, drawings and as
directed by Engineer-in-charge.

12.58.1 8 mm thick fully perforated calcium silicate board made with

Calcareous & Siliceous materials reinforced with cellulose fiber manufactured
through autoclaving process to give stable crystalline structure with minimum
compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size
595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18
% with non woven tissue on the back side, having an NRC ( Noise Reduction
Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing.

12.59 Providing & fixing false ceiling at all height including providing & fixing of
framework made of special section, power pressed from
M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per
IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm
and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x
50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10
x0.50mm of required length with nuts & bolts of required size and other end of angle hanger
fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the
spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick
sqm 1948.95

sqm 1247.50

sqm 1718.70
sqm 1871.80

sqm 1998.25

sqm 1444.90

sqm 1363.95
sqm 307.35

sqm 1851.50
 bottom wedge of 80mm with tapered flanges of 26 mm each having
lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I interme
clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimet
high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions w
450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium
and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, incl
flush finish of tapered and square edges of the board with recommended jointing compoun
jointing compounds in three layers covering up to 150mm on both sides of joints and two coat
all as per manufacture's specification and also including the cost of making opening for light fi
made with frame of perimeter channels suitably fixed, all complete as per drawings, specificat
in charge but excluding the cost of painting with:
12.59.1 8 mm thick Calcium Silicate Board made with Calcareous

& Siliceous materials reinforced with cellulose fiber

manufactured through autoclaving process.
12.60 Providing and fixing thermal insulation of ceiling (under deck insulation) with
Resin Bonded Rockwool conforming to IS: 8183,density 48 kg/ m3, 50 mm thick, wrapped
in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm
and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building.

12.61 Providing and fixing thermal insulation with Resin bonded rock wool conforming to
IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed
over existing false ceilng and held in position by criss-crossing Gl wire.

0004 Production cost of concrete by batch mix plant

12.63 Providing and applying two coats of High Albedo paint having minimum
Solar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per
ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating
thickness and the methodology of application shall strctly as per manufacturer's
specifications and as approved by Engineer-in-Charge. Surface preparation includes
cleaning with metal wire brush to remove all dust, fungus etc., washing with water all
complete. The contractor shall give guarantee for the perfomance of SRI and also the
durabitity of coating, all complete as per direction of Engineer-in-Charge.
ch having
ection perpendicular to G.I intermediate channel with connecting
ry junction, including fixing perimeter channels 0.50mm thick 27mm
er of ceiling fixed to wall/ partitions with the help of Rawl plugs at
interval, including fixing of Calcium Silicate Board to ceiling section
size 3.5 x25mm at 230mm c/c, including jointing & finishing to a
h recommended jointing compounds, jointing tapes,finishing with
on both sides of joints and two coats of primer suitable for boards,
e cost of making opening for light fittings, grills, diffusers, cut outs
omplete as per drawings, specificaton and direction of the Engineer

Calcareous

sqm 1330.40

sqm 568.45

sqm 272.25

sqm 277.90

sqm 309.55
12.64 Providing & fixing at all heights, levels and locations Mill finish
Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimen
characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss mem
curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EP
of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost
shall be paid separately).

12.64.1 0.56 mm, Aluminium troughed profile with center to center

pitch of 200 mm, depth of 32 mm, overall profile width1092
mm, cover width 1000mm.
12.64.2 0.71 mm, troughed profile with center to center pitch of
0004 Production cost of concrete by batch mix plant
cover width 1000mm.
12.64.3 0.91 mm, troughed profile with center to center pitch of
200 mm, depth of 32 mm, overall profile width1092 mm,
cover width 1000mm.
12.64.4 0.56mm Aluminium profile with center to center pitch of
175 mm, depth of 46mm, top crest width of 41mm,
bottom valley width of 80mm, overall profile width of
1144mm, cover width 1050mm.
12.64.5 0.71mm Aluminium profile with center to center pitch of
175 mm, depth of 46mm, top crest width of 41mm,
bottom valley width of 80mm, overall profile width of
1144mm, cover width 1050mm.
12.64.6 0.91mm Aluminium profile with center to center pitch of
175 mm, depth of 46mm, top crest width of 41mm,
bottom valley width of 80mm, overall profile width of 1144mm, cover
width 1050mm.
12.64.7 0.56mm Aluminium Circular (sinusoidal) profile with center to center
pitch of 75 mm, depth of 19 mm, overall profile
width 1250mm,cover width 1150mm.
12.64.8 0.71mm Aluminium Circular (sinusoidal) profile with center
to center pitch of 75 mm, depth of 19 mm, overall profile
width 1250mm,cover width 1150mm.
12.64.9 0.91mm Aluminium Circular (sinusoidal) profile with center
to center pitch of 75 mm, depth of 19 mm, overall profile
width 1250mm,cover width 1150mm.
12.65 Providing & fixing at all heights, levels and locations colour finish
Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimen
 ish
Hx8 conforming to IS 737 and dimensions as per IS code 2676 with
e sheets shall be fixed to truss members in slope or required pitch or
ews M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive
s of the Engineer-In-Charge. (Cost of truss/frame work

sqm 928.95

sqm 1158.80

sqm 1452.20

sqm 1201.20

sqm 1488.90

sqm 1871.50

sqm 916.85

sqm 1147.10

sqm 1454.10
finish
Hx8 conforming to IS 737 and dimensions as per IS code 2676 with
 characteristics of good formability and corrosion resistance. The
profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex
Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labo
sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work
shall be paid separately).

12.65.1 0.56 mm, Aluminium Color coated troughed profile with

center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm,
cover width 1000mm.

12.65.2 0.71 mm, Aluminium Color coated troughed profile with center to
center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover
width 1000mm.

12.65.3 0.91 mm, Aluminium Color coated troughed profile with center to
center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover
width 1000mm.

0004 Production cost of concrete by batch mix plant

12.65.5 0.71mm Aluminium color coated profile with center to center pitch of
175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm,
overall profile width of 1144mm, cover width 1050mm.

12.65.6 0.91mm Aluminium color coated profile with center to center pitch of
175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm,
overall profile width of 1144mm, cover width 1050mm.

12.65.7 0.56 mm Aluminium profile with center to center pitch of

177.5 mm, depth of 28.5 mm, 987mm overall profile width, cover width 900mm

12.65.8 0.71 mm Aluminium profile with center to center pitch of

177.5 mm, depth of 28.5 mm, 987mm overall profile width, cover width 900mm

12.66 Providing and fixing of Pre-coated colour or mill finish Aluminium

Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004
coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 micron
screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete :
12.66.1 Precoated/mill finish aluminium Ridges plain
(500- 600mm) metre 969.50
e. The
equired pitch or curvature with Hex cap headed self drilling/tapping
seal washer etc. all inclusive of labour, scaffolding, T&P and
-Charge. (Cost of truss/frame work

sqm 1058.60

sqm 1316.35

sqm 1657.55

sqm 1373.25

sqm 1706.90

sqm 2150.30

sqm 1126.00

sqm 1410.45
minium
nation) [Aluminium Alloy (AA) 3004 (ISO designation)] For color,
nd polyester top coat 15-18 microns, using self drilling/ tapping SS
her complete :

969.50
12.66.2 Precoated/mill finish aluminium Flashings/ Aprons
(Upto 600 mm)
12.66.3 Precoated/mill finish aluminium North light curves
12.66.4 Precoated/mill finish aluminium Barge board (Upto 200 mm)

12.66.5 Precoated/mill finish aluminium Crimp curve

0004 Production cost of concrete by batch mix plant
metre 885.50

metre 971.55

metre 748.20

metre 829.05

metre 1616.00