Scribd
Upload
81 views

Single Row IDC Header: Elco Elco

The document describes an IDC header and socket for 0.100" pitch flat cable. The header is a single-piece insulator with right angle or straight terminations, while the socket is a two-piece insulator compatible with 26/28 AWG cable or solder terminations. Both components use similar contact parts as other IDC connectors and are rated for voltages up to 350V DC/AC peak with a maximum current of 1.5A at 25C or 1A at 70C.

Uploaded by

Fariz Safriansyah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views

Single Row IDC Header: Elco Elco

The document describes an IDC header and socket for 0.100" pitch flat cable. The header is a single-piece insulator with right angle or straight terminations, while the socket is a two-piece insulator compatible with 26/28 AWG cable or solder terminations. Both components use similar contact parts as other IDC connectors and are rated for voltages up to 350V DC/AC peak with a maximum current of 1.5A at 25C or 1A at 70C.

Uploaded by

Fariz Safriansyah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Single Row IDC Header

Series 8284
IDC header/socket for 0.100" (2.54mm) pitch IDC for
0.100" (2.54mm) round conductor flat cable uses similar
8289/8290 contact components recognized under UL &
CSA specifications, but housed in a single row insulator
format. The header is a 1-piece insulator with right angle,
straight solder or press-fit terminations. The socket
is a 2-piece insulator design with IDC contacts suitable for
termination to 26/28 AWG stranded ribbon cable or dip
solder terminations.

TECHNICAL SPECIFICATION
Material: Dielectric Withstanding Voltage: Mechanical Endurance:
Molding - UL94VO rated grey polyester 1050V DC or AC peak Standard tin plating - 10 cycles
Contact - Copper alloy Voltage Rating: Insertion/Withdrawal Forces:
Current Rating: 350V DC or AC peak 2.7N max insertion force per contact
1.5 Amp maximum at 25ºC Contact Resistance: 0.2N min withdrawal force per contact
1 Amp maximum at 70ºC 20 milliohms maximum
Insulation Resistance: Operating Temperature:
1000 megohms -55ºC to +125ºC

CUSTOMER APPLICATION TOOLING


A standard hand press set and platen is available.
See page 27.

HEADER DIMENSIONS: millimeters (inches)


No. of Positions A B C D E F G
8 7 17.78 (0.70) 21.30 (0.84) 18.54 (0.73) 19.30 (0.76) 23.70 (0.93) 17.54 (0.69)
14 13 33.02 (1.30) 36.54 (1.44) 33.78 (1.33) 34.54 (1.36) 38.94 (1.53) 32.78 (1.29)
16 15 38.10 (1.50) 42.22 (1.66) 38.86 (1.53) 39.62 (1.56) 44.02 (1.73) 37.86 (1.49)
18 17 43.18 (1.70) 46.70 (1.84) 43.94 (1.73) 44.70 (1.76) 49.10 (1.93) 42.94 (1.69)
20 19 48.26 (1.90) 52.38 (2.06) 49.02 (1.93) 49.78 (1.96) 54.18 (2.13) 48.02 (1.89)
24 23 58.42 (2.30) 61.94 (2.44) 59.18 (2.33) 59.94 (2.36) 64.34 (2.53) 58.18 (2.29)

ORDERING CODE
10 8284 014 000 030

Connector Code Series Number Number of Contact Variation Plating Variation


Prefix Contacts 000 = 0.110" (2.8mm) 030 = Tin plating,
10 = Header Connector 008 = 8 position Straight PC Tail 10 cycles
014 = 14 position 001 = 0.146" (3.7mm) 040 = Gold plating,
016 = 16 position Straight PC Tail 50 cycles
018 = 18 position 002 = 0.110" (2.8mm)
020 = 20 position R.A. PC Tail
024 = 24 position 003 = 0.146" (3.7mm)
R.A. PC Tail
009 = 0.209" (5.3mm)
Straight PC Tail

10 ELCO
Single Row IDC Socket
Series 8284
IDC header/socket for 0.100" (2.54mm) pitch IDC for
0.100" (2.54mm) round conductor flat cable uses similar
8289/8290 contact components recognized under UL &
CSA specifications, but housed in a single row insulator
format. The header is a 1-piece insulator with right angle,
straight solder or press-fit terminations. The socket is
a 2-piece insulator design with IDC contacts suitable for
termination to 26/28 AWG stranded ribbon cable or dip
solder terminations.

TECHNICAL SPECIFICATION
Material: Dielectric Withstanding Voltage: Operating Temperature:
Molding - UL94VO rated grey polyester 1050V DC or AC peak -55ºC to +125ºC
Contact - Copper alloy Voltage Rating: Mechanical Endurance:
Current Rating: 350V DC or AC peak Standard tin plating - 10 cycles
1.5 Amp maximum at 25ºC Contact Resistance: Insertion/Withdrawal Forces:
1 Amp maximum at 70ºC 20 milliohms maximum 2.7N max insertion force per contact
Insulation Resistance: 0.2N min withdrawal force per contact
1000 megohms

CUSTOMER APPLICATION TOOLING


A standard hand press set and platen is available.
See page 27.

SOCKET
DIMENSIONS: millimeters (inches)
No. of Positions A B C D E F
8 7 17.78 (0.70) 21.30 (0.84) 18.54 (0.72) 19.30 (0.76) 23.70 (0.93)
14 13 33.02 (1.18) 36.54 (1.45) 33.78 (1.33) 34.54 (1.36) 38.94 (1.53)
16 15 38.10 (1.50) 42.22 (1.66) 38.86 (1.53) 39.62 (1.56) 44.02 (1.73)
18 17 43.18 (1.70) 46.70 (1.84) 43.94 (1.73) 44.70 (1.76) 49.10 (1.93)
20 19 48.26 (1.90) 52.38 (2.06) 49.02 (1.93) 49.78 (1.96) 54.18 (2.13)
24 23 58.42 (2.30) 61.94 (2.44) 59.18 (2.33) 59.94 (2.36) 64.34 (2.53)

ORDERING CODE
20 8284 014 000 030

Connector Code Series Number Number of Contact Variation Plating Variation


Prefix Contacts 000 = Standard IDC 030 = Tin plating,
20 = Socket Connector 008 = 8 position contact 26/28 10 cycles
014 = 14 position AWG 040 = Gold plating,
016 = 16 position 50 cycles
018 = 18 position
020 = 20 position
024 = 24 position

ELCO 11

You might also like