SDAS205A − APRIL 1982 − REVISED DECEMBER 1994

• 8-Line to 1-Line Multiplexers Can Perform SN54ALS151 . . . J PACKAGE

as: SN74ALS151, SN74AS151 . . . D OR N PACKAGE
(TOP VIEW)
Boolean Function Generators
Parallel-to-Serial Converters
Data Source Selectors D3 1 16 VCC

• Input Clamping Diodes Simplify System

D2
D1
2
3
15
14
D4
D5
Design
D0 4 13 D6
• Package Options Include Plastic Y 5 12 D7
Small-Outline (D) Packages, Ceramic Chip W 6 11 A
Carriers (FK), and Standard Plastic (N) and G 7 10 B
Ceramic (J) 300-mil DIPs GND C
8 9

description
SN54ALS151 . . . FK PACKAGE
These data selectors/multiplexers provide full (TOP VIEW)
binary decoding to select one-of-eight data

VCC
sources. The strobe (G) input must be at a low

NC
D2
D3

D4
logic level to enable the inputs. A high level at the
strobe terminal forces the W output high and the 3 2 1 20 19
Y output low. D1 4 18 D5
D0 5 17 D6
The SN54ALS151 is characterized for operation NC 6 16 NC
over the full military temperature range of − 55°C Y 7 15 D7
to 125°C. The SN74ALS151 and SN74AS151 are W 8 14 A
characterized for operation from 0°C to 70°C. 9 10 11 12 13

GND

B
G

C
NC
NC − No internal connection

FUNCTION TABLE
INPUTS
OUTPUTS
SELECT STROBE
C B A G Y W
X X X H L H
L L L L D0 D0
L L H L D1 D1
L H L L D2 D2
L H H L D3 D3
H L L L D4 D4
H L H L D5 D5
H H L L D6 D6
H H H L D7 D7
H = high level, L = low level, X = irrelevant
D0, D1, . . . D7 = the level of the respective D input

  !"# $ %&'# "$  (&)*%"# +"#', Copyright  1994, Texas Instruments Incorporated
+&%#$ %! # $('%%"#$ (' #-' #'!$  '."$ $#&!'#$
$#"+"+ /""#0, +&%# (%'$$1 +'$ # '%'$$"*0 %*&+'
#'$#1  "** (""!'#'$,

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1

POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443









  




SDAS205A − APRIL 1982 − REVISED DECEMBER 1994

logic symbol†

7 MUX
G EN
11
A 0
10 0
B G7
9
C 2
4
D0 0 5
3 Y
D1 1 6
2 W
D2 2
1
D3 3
15
D4 4
14
D5 5
13
D6 6
12
D7 7

† This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
Pin numbers shown are for the D, J, and N packages.

logic diagram (positive logic)

7
G
4
D0

3
D1

2
D2

1
D3
Data 5
Inputs Y
15 6
D4 W

14
D5

13
D6

12
D7
11
A
Data
10
Select B
(binary)
9
C

Pin numbers shown are for the D, J, and N packages.

2 •
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
•
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443









  




SDAS205A − APRIL 1982 − REVISED DECEMBER 1994

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Operating free-air temperature range, TA: SN54ALS151 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55°C to 125°C
SN74ALS151 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

recommended operating conditions

SN54ALS151 SN74ALS151
UNIT
MIN NOM MAX MIN NOM MAX
VCC Supply voltage 4.5 5 5.5 4.5 5 5.5 V
VIH High-level input voltage 2 2 V
VIL Low-level input voltage 0.7 0.8 V
IOH High-level output current −1 −2.6 mA
IOL Low-level output current 12 24 mA
TA Operating free-air temperature −55 125 0 70 °C

electrical characteristics over recommended operating free-air temperature range (unless

otherwise noted)
SN54ALS151 SN74ALS151
PARAMETER TEST CONDITIONS UNIT
MIN TYP‡ MAX MIN TYP‡ MAX
VIK VCC = 4.5 V, II = − 18 mA −1.5 −1.5 V
VCC = 4.5 V to 5.5 V, IOH = − 0.4 mA VCC − 2 VCC − 2
VOH IOH = − 1 mA 2.4 3.3 V
VCC = 4.5 V
IOH = − 2.6 mA 2.4 3.2
IOL = 12 mA 0.25 0.4 0.25 0.4
VOL VCC = 4.5 V V
IOL = 24 mA 0.35 0.5
II VCC = 5.5 V, VI = 7 V 0.1 0.1 mA
IIH VCC = 5.5 V, VI = 2.7 V 20 20 µA
IIL VCC = 5.5 V, VI = 0.4 V −0.1 −0.1 mA
IO§ VCC = 5.5 V, VO = 2.25 V −20 −112 −30 −112 mA
ICC VCC = 5.5 V, Inputs at 4.5 V 7.5 12 7.5 12 mA
‡ All typical values are at VCC = 5 V, TA = 25°C.
§ The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.

•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265 3
•
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443









  




SDAS205A − APRIL 1982 − REVISED DECEMBER 1994

switching characteristics (see Figure 1)

VCC = 4.5 V to 5.5 V,
CL = 50 pF,
RL = 500 Ω,
FROM TO
PARAMETER TA = MIN to MAX† UNIT
(INPUT) (OUTPUT)
SN54ALS151 SN74ALS151
MIN MAX MIN MAX
tPLH 4 21 4 18
A, B, or C Y ns
tPHL 7 35 8 24
tPLH 5 36 7 24
A, B, or C W ns
tPHL 7 26 7 23
tPLH 3 14 3 10
Any D Y ns
tPHL 5 21 5 15
tPLH 3 23 3 15
Any D W ns
tPHL 4 20 4 15
tPLH 4 21 4 18
G Y ns
tPHL 4 25 4 19
tPLH 5 27 5 19
G W ns
tPHL 5 26 5 23
† For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡
Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Operating free-air temperature range, TA: SN74AS151 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

recommended operating conditions

SN74AS151
UNIT
MIN NOM MAX
VCC Supply voltage 4.5 5 5.5 V
VIH High-level input voltage 2 V
VIL Low-level input voltage 0.8 V
IOH High-level output current −15 mA
IOL Low-level output current 48 mA
TA Operating free-air temperature 0 70 °C

4 •
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
•
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443









  




SDAS205A − APRIL 1982 − REVISED DECEMBER 1994

electrical characteristics over recommended operating free-air temperature range (unless

otherwise noted)
SN74AS151
PARAMETER TEST CONDITIONS UNIT
MIN TYP† MAX
VIK VCC = 4.5 V, II = − 18 mA −1.2 V
VCC = 4.5 V to 5.5 V, IOH = − 2 mA VCC − 2
VOH V
VCC = 4.5 V, IOH = − 15 mA 2.4 3.2
VOL VCC = 4.5 V, IOL = 48 mA 0.35 0.5 V
A, B, or C 0.2
II VCC = 5.5 V, VI = 7 V mA
All others 0.1
A, B, or C 40
IIH VCC = 5.5 V, VI = 2.7 V µA
A
All others 20
A, B, or C −1
IIL VCC = 5.5 V, VI = 0.4 V mA
All others −0.5
IO‡ VCC = 5.5 V, VO = 2.25 V −30 −112 mA
ICC VCC = 5.5 V 18.6 30 mA
† All typical values are at VCC = 5 V, TA = 25°C.
‡ The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.

switching characteristics (see Figure 1)

VCC = 4.5 V to 5.5 V,
CL = 50 pF,
RL = 500 Ω,
FROM TO
PARAMETER TA = MIN to MAX§ UNIT
(INPUT) (OUTPUT)
SN74AS151
MIN MAX
tPLH 4.5 14.5
A, B, or C Y ns
tPHL 4.5 15
tPLH 4 12
A, B, or C W ns
tPHL 4 12
tPLH 3 10.5
Any D Y ns
tPHL 3 11
tPLH 2 6.5
Any D W ns
tPHL 1 4.5
tPLH 4.5 14
G Y ns
tPHL 3 11
tPLH 1.5 6
G W ns
tPHL 3 10
§ For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.

•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265 5
•
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443









  




SDAS205A − APRIL 1982 − REVISED DECEMBER 1994

PARAMETER MEASUREMENT INFORMATION

SERIES 54ALS/74ALS AND 54AS/74AS DEVICES
7V
VCC RL = R1 = R2

S1
RL
R1
From Output Test From Output Test From Output Test
Under Test Point Under Test Point Under Test Point
CL RL CL
CL R2
(see Note A) (see Note A)
(see Note A)

LOAD CIRCUIT FOR

BI-STATE LOAD CIRCUIT LOAD CIRCUIT
TOTEM-POLE OUTPUTS FOR OPEN-COLLECTOR OUTPUTS FOR 3-STATE OUTPUTS

Timing 3.5 V High-Level 3.5 V

Input 1.3 V Pulse 1.3 V 1.3 V
0.3 V 0.3 V
th tw
tsu
3.5 V 3.5 V
Data Low-Level
Input 1.3 V 1.3 V 1.3 V 1.3 V
Pulse
0.3 V 0.3 V

VOLTAGE WAVEFORMS VOLTAGE WAVEFORMS

SETUP AND HOLD TIMES PULSE DURATIONS

3.5 V
Output
Control 1.3 V 1.3 V
(low-level
enabling) 0.3 V 3.5 V
tPZL Input 1.3 V 1.3 V
tPLZ
0.3 V
[3.5 V
Waveform 1 tPLH tPHL
S1 Closed 1.3 V
In-Phase VOH
(see Note B) 1.3 V 1.3 V
VOL Output
tPHZ 0.3 V VOL
tPZH tPLH
VOH tPHL
Waveform 2 VOH
Out-of-Phase
S1 Open 1.3 V 0.3 V 1.3 V 1.3 V
Output
(see Note B) (see Note C) VOL
[0 V
VOLTAGE WAVEFORMS VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS PROPAGATION DELAY TIMES

NOTES: A. CL includes probe and jig capacitance.

B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. When measuring propagation delay items of 3-state outputs, switch S1 is open.
D. All input pulses have the following characteristics: PRR ≤ 1 MHz, tr = tf = 2 ns, duty cycle = 50%.
E. The outputs are measured one at a time with one transition per measurement.

Figure 1. Load Circuits and Voltage Waveforms

6 •
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
•
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
 PACKAGE OPTION ADDENDUM

www.ti.com 10-Jun-2014

PACKAGING INFORMATION

Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)

84141012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 84141012A
SNJ54ALS
151FK
8414101EA ACTIVE CDIP J 16 1 TBD A42 N / A for Pkg Type -55 to 125 8414101EA
SNJ54ALS151J
8414101FA ACTIVE CFP W 16 1 TBD A42 N / A for Pkg Type -55 to 125 8414101FA
SNJ54ALS151W
SN74ALS151D ACTIVE SOIC D 16 40 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 ALS151
& no Sb/Br)
SN74ALS151DR ACTIVE SOIC D 16 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 ALS151
& no Sb/Br)
SN74ALS151DRE4 ACTIVE SOIC D 16 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 ALS151
& no Sb/Br)
SN74ALS151N ACTIVE PDIP N 16 25 Pb-Free CU NIPDAU N / A for Pkg Type 0 to 70 SN74ALS151N
(RoHS)
SN74ALS151N3 OBSOLETE PDIP N 16 TBD Call TI Call TI 0 to 70
SN74ALS151NSR ACTIVE SO NS 16 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 ALS151
& no Sb/Br)
SN74AS151D ACTIVE SOIC D 16 40 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 AS151
& no Sb/Br)
SN74AS151N ACTIVE PDIP N 16 25 Pb-Free CU NIPDAU N / A for Pkg Type 0 to 70 SN74AS151N
(RoHS)
SN74AS151NSR ACTIVE SO NS 16 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 74AS151
& no Sb/Br)
SNJ54ALS151FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 84141012A
SNJ54ALS
151FK
SNJ54ALS151J ACTIVE CDIP J 16 1 TBD A42 N / A for Pkg Type -55 to 125 8414101EA
SNJ54ALS151J
SNJ54ALS151W ACTIVE CFP W 16 1 TBD A42 N / A for Pkg Type -55 to 125 8414101FA
SNJ54ALS151W

(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

Addendum-Page 1
 PACKAGE OPTION ADDENDUM

www.ti.com 10-Jun-2014

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.

(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)

(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.

(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

OTHER QUALIFIED VERSIONS OF SN54ALS151, SN74ALS151 :

• Catalog: SN74ALS151
• Military: SN54ALS151

NOTE: Qualified Version Definitions:

Addendum-Page 2
 PACKAGE OPTION ADDENDUM

www.ti.com 10-Jun-2014

• Catalog - TI's standard catalog product

• Military - QML certified for Military and Defense Applications

Addendum-Page 3
 PACKAGE MATERIALS INFORMATION

www.ti.com 14-Jul-2012

TAPE AND REEL INFORMATION

*All dimensions are nominal

Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1
Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
SN74ALS151DR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1
SN74ALS151NSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
SN74AS151NSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1

Pack Materials-Page 1
 PACKAGE MATERIALS INFORMATION

www.ti.com 14-Jul-2012

*All dimensions are nominal

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
SN74ALS151DR SOIC D 16 2500 333.2 345.9 28.6
SN74ALS151NSR SO NS 16 2000 367.0 367.0 38.0
SN74AS151NSR SO NS 16 2000 367.0 367.0 38.0

Pack Materials-Page 2
 IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2014, Texas Instruments Incorporated