Fire Detection - Addressable

6000/LED High Intensity Flashing Beacon

Protec Fire Detection plc

• Protec AlgoTec™ 6000 Protocol

• Loop Powered

• High Intensity LED’s

• Extremely Long Service Life

• Integral Short Circuit Isolator

• Ultra Low Current Consumption

• Weatherproof to IP65

• Choice Of Colours

The unique Protec 6000/LED utilises a high As Protec are specialists in the safety
intensity flashing beacon array. This systems market, our main objective is to
arrangement simplifies installation and produce high quality and reliable
considerably improves the aesthetic products. Manufacturing at our UK based
appearance compared to the more costly facilities, our in-house design team
and cumbersome alternatives. The
develop innovative products which are
6000/LED is the latest addition to the range
produced using the latest manufacturing
of audio/visual devices offered by Protec.
techniques with in-line automatic test
equipment to ensure consistent high
The 6000/LED has 18 high intensity LEDs,
quality and reliability.
and due to the low current design, is
addressable and loop powered, utilising
the Protec Algo-Tec™ 6000 Protocol. The 6000/LED/RED
flash rate is 1Hz. The 6000/LED
incorporates a loop short circuit isolator to
6000/LED/CLEAR
enhance the system integrity.

The 6000/LED is available in a choice of 6000/LED/AMBER

lens and backbox colours and has an IP65
rating making the product suitable for 6000/LED/BLUE
mounting internally or externally.

6000/LED/GREEN
The 6000/LED/RED is an ideal addition to
our fire alarm system providing a clear
indication of a fire alarm, for users with
hearing impairment.

ADDRESSING SAFETY SYSTEMS WITH INTELLIGENCE

Fire Detection - Addressable

6000/LED Technical Specification

Dimensions (mm) Technical Specification:

63.33 Loop Powered Yes

Loop Standby Load 500µA

Loop Alarm Load 5.5mA

Number of Addresses 1
96

Loop Isolator Yes

Output Details Array of 18 Red high intensity LED’s

Flash Rate 1Hz

Weight 99g
Typical Wiring o o
Temperature Range -10 C to 55 C
LOOP
+ + - -
Humidity 0 to 85% RH non condensing

IP Rating IP65
LOOP +
LOOP - LOOP -
LOOP +
Construction ABS Base/Polycarbonate LENS

NOTE:
Applicable Standards Designed to EN54 Part 17 & 23 (draft)
PROTEC FIRE DETECTION PLC
WEFA 376 FOR WEATHER PROOFING ALL
Compliant to CE and LVD standards
CABLE ENTRIES AND SCREW
FIXING POINTS MUST BE
SEALED AT INSTALLATION Device Protocol Algo-Tec™ 6000

FAST™ Addressing Model References Deep Base Dimensions (mm)

FAST™ (Firmware Addressed Secure 55.5
Technology). Each Algo-Tec™ 6000 device Product Code Colour Options
17
is manufactured with a unique serial 6000/LED/RED Red Lens (Red Base)
number factory programmed (firmware
embedded) and device label. The label 6000/LED/CLEAR* Clear Lens (White Base)
includes the serial number on 2 bar-coded 6000/LED/AMBER Amber Lens (White Base)
segments, 2 of which are removable by the 6000/LED/BLUE Blue Lens (White Base)
installer (one is a spare). The label is
96

attached to an address location booklet, 6000/LED/GREEN Green Lens (White Base)

which is handed to the engineer prior to NOTE: All the Model References are loop
commissioning. During commissioning the powered addressable LED beacons, supplied with a
engineer scans the address location low profile base.
booklet to download the loop, address and An optional deep base (below) can be purchased
serial number details. The downloaded separately to allow surface wiring to be terminated
data is then checked and stored within the directly into the base.
secure non-volatile memory of the control *This unit will flash red.
panel and the addressing is complete.
FAST™ and easy eliminating troublesome 29-982-75 Red Deep Base
and time consuming setting of address 29-983-76 White Deep Base
cards and DIL switches. FAST™ addressing
is more secure than ‘SOFT ADDRESSING’
and easier to extend or amend, allowing
greater flexibility and reduced costs.

Company Policy is one of continuous improvement, we reserve the right to change specification without prior notice
Protec Fire Detection Plc, Protec House, Churchill Way, Nelson, Lancashire, BB9 6RT

Tel: 01282 717171 Fax: 01282 717273 Web: www.protec.co.uk Email: [email protected]
MED1008 Issue 0