PERISCOPE

APPLICATIONS Real-time bed boundary mapping for steering wells to the best place and
• Maximize production evaluating formations in less time.
• Place wells precisely in thin and
Unmatched reservoir navigation capability
complex reservoir targets
• Detect water The PeriScope bed boundary mapper provides unmatched reservoir
• Avoid sidetracking navigation capability, using unique symmetrized directional measurements
• Refine reservoir models with maximum sensitivity to formation or fluid boundaries. These
measurements make it possible to map boundaries in real time, even when
BENEFITS
anisotropy and structural dip variation are present — the only way inversion
• Increase production rates and
can be performed without a predefined geological model. By guiding
recovery
decision-making for real-time placement of a horizontal well in the best
• Reduce or delay water
place in the reservoir, the PeriScope mapper enables the drilling team to
production
maximize well production and minimize well costs.
• Access reserves previously
considered economically Directional, deep measurements
marginal
• Cut drilling cost by avoiding The unique PeriScope mapper makes 360º deep, directional measurements
drilling hazards and eliminating that show the orientation of boundaries as far as 6.4 m from the borehole,
need for pilot hole using a combination of state-of-the-art tilted coil technology and multiple
• Estimate reserves more frequencies and spacings — 2MHz, 400 kHz, and 100kHz at 96 in, 84 in,
accurately 74 in, 44 in, 40 in, 34 in, 28 in, 22 in, and 16 in. In addition, the mapper
• Shorten BHA by integrating provides high-quality, multifrequency — 2MHz, 400 kHz, and 100kHz —
resistivity and azimuthal deep resistivity measurements, azimuthal gamma ray measurements, and annulus
measurements in one tool pressure measurements.

FEATURES Illuminating the reservoir

• Formation and fluid boundary
Because the PeriScope mapper continuously delivers deep images of
mapping while drilling
boundaries around the borehole, uncertainties in structure and formation
• High-resolution azimuthal
properties are significantly reduced in larger volumes of the reservoir
sensitivity for accurate boundary
than with any traditional well logs. This results in more accurate reservoir
orientation while drilling
models, superior reserves estimation, and improved planning of future wells.
• Unique symmetrization that
provides accurate boundary 6.4 m
mapping independent of
anisotropy and dip
• Fully compensated multidepth
resistivity measurements while
The PeriScope mapper enables
drilling precise well placement through
exact knowledge of fluid and bed
6.4 m
boundary contact points.

PACESETTERDIRECTIONAL.CA
1
24 Hour Operations: 403.444.7595 2500-635 8th Ave. SW
24 Hour Tools: 403.444.7587 Calgary, Alberta, T2P 3M3
403.695.1160 | 403.695.1164
 PERISCOPE

PERISCOPE SPECIFICATIONS PERISCOPE 475 PERISCOPE 675

General

Drill collar nominal OD 4.75 in API 6.75 in API

Max. diameter (on wear bands) 5.28 in (134.11mm) 7.5 in (190.5 mm)

Makeup length (without lower crossover) 7.2 m (23.5 ft) 5.6 m (18.3 ft)

Total tool weight 1,200 lbm (544 kg) 1,800 lbm (816 kg)

Top thread connection NC 38 box 5½ FH box

Bottom thread connection NC 35 box NC 50 box

Max. operating temperature 150 degC (300 degF) 150 degC (300 degF)

Hole size range 5¾ to 6¾ in 8¼ to 97⁄8 in

Rotation speed range 10 to 300 rpm 10 to 300 rpm

Bending

Max. tool curvature Rotating 15°/30 m (15°/100 ft) 8°/30 m (8°/10 ft)
Sliding 30°/30 m (30°/100 ft) 16°/30 m (16°/100 ft)

30 min continuous at 50 gn 30 min continuous at 50 gn

Max. downhole shocks
or 200,000 shocks at 50 gn or 200,000 shocks at 50 gn

Axial

Max. jarring load 200,000 lbf (889,644 N) 330,000 lbf (1,467,913 N)

Max. weight on bit F = 16,000,000/L2† F = 74,000,000/L2†

Hydraulics

Max. operating pressure 172 MPa (25,000 psi) 172 MPa (25,000 psi)

Pressure drop constant (C) ‡

8,000 121,000

Max. flow rate 1,514 L/min (400 galUS/min) 3,028 L/min (800 galUS/min)

Max. sand content 3% by volume 3% by volume

Lost circulation material tolerance Medium nut plug, 50 lbm/galUS Medium nut plug, 50 lbm/galUS

Max. dissolved oxide content 1 x 10-6 1 x 10-6

Min. drilling fluid PH 9 9

Torque

Max. operating rotary torque 8,000 ft.lbf (10,847 N.m) 12,000 ft.lbf (16,270 N.m)

Connection makeup torque 9,000 ft.lbf (12,202 N.m) 24,000 ft.lbf (32,540 N.m)

APWD ANNULAR PRESSURE WHILE DRILLING SPECIFICATIONS

Range 172 MPa (25,000 psi)

Accuracy 0.172 MPa (±25 psi)

Resolution 0.007 MPa (±1 psi )

GENERAL SPECIFICATIONS
Power MWD turbine

Memory 104 MB

Drilling mud type No limit

†
L = Distance between stabilizers
‡
Pressure drop (psi) = Mud weight (lbm/galUS x Flow rate2 (galUS/min)2/C

PACESETTERDIRECTIONAL.CA
2
24 Hour Operations: 403.444.7595 2500-635 8th Ave. SW
24 Hour Tools: 403.444.7587 Calgary, Alberta, T2P 3M3
403.695.1160 | 403.695.1164
 PERISCOPE

RESISTIVITY MEASUREMENT SPECIFICATIONS ACCURACY§ RANGE (ohm.m)††

Phase shift resistivity 2 MHz ± 2% 0.2 to 60
± 0.3 mS/m 60 to 3,000
400 kHz ± 2% 0.1 to 10
± 2 mS/m 10 to 100
100 kHz ± 2% 0.05 to 2
± 10 mS/m 2 to 20

Attenuation resistivity 2 MHz ± 3% 0.2 to 25

± 1.5 mS/m 25 to 50
400 kHz ± 3% 0.1 to 3
± 10 mS/m 3 to 10
100 kHz ± 3% 0.01 to 1
± 30 mS/m 1 to 3

PHASE SHIFT TRANSMITTER- ATTENUATION TRANSMITTER-

VERTICAL RESOLUTION (ft)‡‡
RECEIVER SPACING (in) RECEIVER SPACING (in)

16 22 28 34 40
16 22 28 34 40

R = 0.1 ohm.m 100 kHz

0.6 0.6 0.6 0.6 0.6
1.4 1.6 1.7 1.8 1.8
R = 1 ohm.m 2 MHz
0.7 0.7 0.7 0.7 0.7
1.8 1.8 1.8 1.8 1.8
400 kHz
1 1 1 1 1
3 3.5 4 4 4
100 kHz
1.2 1.4 1.5 1.6 1.7
2.5 2.9 3.2 3.3 3.6
R = 10 ohm.m 2 MHz
1 1 1 1 1
4 5 6 6 6

PHASE SHIFT TRANSMITTER- ATTENUATION TRANSMITTER-

RADIUS OF INVESTIGATION (in)§§
RECEIVER SPACING (in) RECEIVER SPACING (in)

16 22 28 34 40
16 22 28 34 40

Frequency 2 MHz 18.5 22 25 27.5 30 35.5 41 44 48 52.5

400 kHz 23 28.5 33 37 41 51 57 60 65 67.5
100 kHz 24.5 31 36 41 41 52 60 63 67 69

DIRECTIONAL MEASUREMENT SPECIFICATIONS

Operating frequency 100 kHz, 400 kHz, 2 MHz

Spacing 22 in, 34 in, 44 in, 74 in, 84 in, 96 in

Azimuthal coverage 360º

Azimuthal resolution 2º

Equivalent azimuthal sectors 180

Detection range 6.4 m at 50/1 ohm.m and 0.03 dB threshold or only limited by conductivity difference

GAMMA RAY SPECIFICATIONS

Range 0 to 250 gAPI

Vertical resolution 10 in (254 mm)

Statistical repeatability ± 2 gAPI at 100 gAPI, 30 m/hr, and 3-point average

Azimuthal sensitivity ratio, front:back 3.3:1 (PeriScope 475), 11:1 (PeriScope 675)

Accuracy ± 3%

Image Real-time and memory

Azimuthal sectors 4

§
Above the specified resistivity value, the accuracy is expressed in terms of constant conductivity (mmho/m)
††
Resistivities above 200 ohm.m require dielectric processing
‡‡
Width at half maximum of the response functions along the tool axis
§§
Values for which the integrated radial geometric factor reaches 0.5 in in a 10 ohm.m formation

PACESETTERDIRECTIONAL.CA
3
24 Hour Operations: 403.444.7595 2500-635 8th Ave. SW
24 Hour Tools: 403.444.7587 Calgary, Alberta, T2P 3M3
403.695.1160 | 403.695.1164