Product Data

Braycote 631 RP
Grease, Perfluoroether Rust Inhibited,

Description
Castrol Braycote™ 631 RP is a smooth, buttery, off-white NLGI #2 grease based upon a perfluoroether oil. This grease is
nonflammable and is in general chemically inert. It is thermally stable either alone or in the presence of oxygen, has
exceptionally low volatility, and has little tendency to form deposits. In addition Braycote 631 RP exhibits excellent
lubricating properties, good dielectric properties, and shear stability. Castrol Fluoroclean™ X100 and Castrol
Fluoroclean™ HE can be used to remove this lubricant. Refer to the data sheets for information regarding these products.

Application
Braycote 631 RP is designed for static or dynamic service in the presence of fuels and oxidizers. It has been used in
gears, ball and roller bearings, electrical contacts, and as a thread and elastomer sealant. It is particularly useful as a
lubricant in corrosive or oxygen (LOX/GOX) service and as a plug valve lubricant. This product is compatible with
concentrated acids and bases and it does not hydrolyze or oxidize. Perfluorinated greases, such as Braycote 631 RP,
exhibit excellent shelf lives due to their inertness.

Typical Characteristics
Name Method Units Braycote 631 RP
Unworked Penetration ASTM D217 / IP 50 0.1 mm 284
Worked Penetration (60 strokes @ 25°C / 77°F) ISO 2137 / ASTM D217 0.1 mm 285
Evaporation Loss (22hrs @ 204°C / 400°F) ASTM D2595 % wt 1.68
Oil Separation (30 hrs @ 204°C / 400°F ASTM D6184 / FTM 321.2 % wt 9.89
Rust Test (distilled water) ASTM D1743 Pass Pass
Resistance to Wash-out by Distilled Water FTM 5415 Pass Pass
Copper Corrosion (24 hrs,100°C / 212°F) ASTM D4048 Rating 1b
Four Ball Wear test - Wear Scar Diameter
ISO 51350 / ASTM D2266 mm 0.66
(40 kgf / 75°C / 1200 rpm / 1 hr)
Low temperature Torque - starting torque @ -54°C / -65.2°F ASTM D1478 N/m 0.441
Low temperature Torque - torque after 60 mins @ -54°C / -65.2°F ASTM D1478 N/m 0.147
LOX Impact Sensitivity (100 mm, 20 drops) - Pass Pass
High Temperature Bearing Life test ASTM D3336 hrs >500
Dropping Point ISO 2176 / ASTM D566 °C/°F 183/361
Specific Gravity @ 20°C / 68°F ISO 12185 / ASTM D4052 kg/m³ 19137
Base Oil Viscosity @ 99°C / 210°F ISO 3104 / ASTM D445 mm²/s 11.6
Base Oil Viscosity @ 20°C / 68°F ISO 3104 / ASTM D445 mm²/s 490
Visocsity Index ISO 2909 / ASTM D2270 - 117
Pour Point ISO 3016 / ASTM D97 °C/°F -36/-30

Page 1 of 2
 Additional Information
Temperature
Range -54ºC to above 204ºC (-65ºF to above 400ºF)

Limitations
Braycote 631 RP is only slightly soluble or insoluble in most current fuels and oxidizers in propellent service, and in most
organic solvents and materials other than fluorinated solvents. It is compatible at normal operating temperatures with
conventional metals, plastics and elastomers. Braycote 631 RP may be adversely affected by Lewis Acids, such as
aluminum chloride, at elevated temperatures. Newly exposed rubbing surfaces of aluminum, magnesium or titanium
alloys may react with Braycote 631 RP under certain conditions. Such systems should be thoroughly evaluated. Surfaces
must be well cleaned of organic rust inhibitors prior to grease application to insure proper lubrication. This product is not
recommended for use in applications under vacuum and loads exceeding 100,000 psi for extended periods of time.

Packaging
Braycote 631RP is packaged in 2 oz (AVDP) disposable syringes, 1 lb plastic containers, 1.75 lb cartridge and 45 lb pail.

Braycote 631 RP
25 Jul 2012
Castrol, the Castrol logo and related marks are trademarks of Castrol Limited, used under licence.

This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or representation, express or implied, is
made as to its accuracy or completeness. Data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advised
to ensure that they refer to the latest version of this data sheet. It is the responsibility of the user to evaluate and use products safely, to assess suitability for the
intended application and to comply with all applicable laws and regulations. Material Safety Data Sheets are available for all our products and should be
consulted for appropriate information regarding storage, safe handling, and disposal of the product. No responsibility is taken by either BP plc or its subsidiaries
for any damage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations, or from hazards inherent in the nature of the
material. All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if you
require any further information.

Castrol Industrial, Technology Centre , Whitchurch Hill , Pangbourne , Reading , RG8 7QR , United Kingdom

www.castrol.com/industrial

Page 2 of 2