Scribd
Upload
188 views

ICM-CD-6120.06 Check Sheet CV & Ancillaries Calibraton

Uploaded by

Shivani Dubey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
188 views

ICM-CD-6120.06 Check Sheet CV & Ancillaries Calibraton

Uploaded by

Shivani Dubey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Systems Completion – B Check Sheet

Control Valve and Ancillaries Calibration

Unique ID: Date Printed:


Tag Number:
Sub-System:
Area/Deck: Test Pack:
Resource: Service:
P&ID No: Manufacturer:
Location Plan: PO:
Single Line Diagram: Model No:
Data Sheet: Serial No:

Item Description of Checks / Actions to be Performed Initial Date


1 All ‘A’ check sheets are accepted and approved.
2 All category ‘B’ punch list items completed and inspected.
Preservation was maintained up to this “B” check and has subsequently been removed for
3
this check.
Actuator Manufacturer:
Actuator Model / Type No.:
Actuator Serial No.:
Size: Rating:
Flange Type: Service:
UID Number:
Initial Date
Valve Information Material Certification correct
Body Material:
Trim Material :
Open Timing (secs) ____
Close Timing (secs) ____
Interface Signal: Type AI / DI
100
Output signal 0% 25 % 50 % 75 %
%
75 % 50 % 25 % 0%
Control Valve
Calibration mA
Travel inches
Travel indicator length _________ inches
Action: DA____ RA____
Actuator
Failure action: FO____ FC____FL____
Hand wheel operation correct Y N N/A
Mfr.: Type No.:
Serial No.: Signal type: AI / DI
Positioner Initial Date
Signal Range _________ mA
Limit switches set

Open / Close indication correct at HMI.

August 2016 (R) © 2013–2016 Chevron U.S.A. Inc. All rights reserved. Confidential – Restricted Access Page 1 of 2
Chevron Engineering Standards: ICM-CD-6120.06
Systems Completion – B Check Sheet
Control Valve and Ancillaries Calibration

Unique ID: Date Printed:


Tag Number:
Sub-System:
Area/Deck: Test Pack:
Resource: Service:
P&ID No: Manufacturer:
Location Plan: PO:
Single Line Diagram: Model No:
Data Sheet: Serial No:

Item Description of Checks / Actions to be Performed Initial Date


Confirm data sheet information matches device type.
Mfr.: Type No.:
Solenoid Serial No.:
Voltage:
Filter / Regulator Mfr.: Model: Range ________ psi

LOCAL CONTROLLER INFORMATION AND ALIGNMENT CHECKS


Initial Date
Gain Range: Auto / Manual operating
correct
Integral Range: Integral action correct
Derivative Range: Derivative correct
Gain Setting: 50% 100% 200%

Test Equipment Manufacturer / Model / Type Serial Number Certification Date

Comments:

Completed By Witnessed By Verified By


Company
Signature
Print Name
Date of Signing

August 2016 (R) © 2013–2016 Chevron U.S.A. Inc. All rights reserved. Confidential – Restricted Access Page 2 of 2
Chevron Engineering Standards: ICM-CD-6120.06

You might also like