Scribd
Upload
22 views

RAPIDLAB 348EX Specification

Rapid

Uploaded by

Bagus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views

RAPIDLAB 348EX Specification

Rapid

Uploaded by

Bagus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RAPIDLab® 348EX Specification

Nama Dagang/ Merk : RAPIDLAB 348EX Blood Gas System and Accessories
Tipe/Ukuran/ Kode Produk : 11065004
Ijin Edar : AKL 20101310763
Nama Pendaftar : PT. SIEMENS INDONESIA
Masa Berlaku Ijin Edar : 1 November 2022

RAPIDLab® 348EX adalah Instrumen untuk pemeriksaan gas darah dan elektrolit pada pelayanan diagnostik.

System Specifications
Dimensions : 38.2 (h) x 38.5 (w) x 35.3 (d) cm
Weight (with bar-code scanner) : 9.8 Kg
Display Interface : Intuitive, icon-based color, Touch Screen
Storage Capacity / Memory : Up to 250 patient test records & Up to 90 results for each level of QC
Data Export : Via integrated USB port/flash drive to PC, or direct to LIS/HIS or RAPIDComm Data Management System
Connectivity Options/Interfaces
# Serial : RS232, LIS1, LIS2, LIS3 protocol
# Bi-Directional : Can be set up for monitoring/control and connectivity with the RAPIDComm Data Management System
# USB Port : Standard USB 2.0

Sample Volume :
# Syringe : 95 uL
# Capillary : 95 uL
# Microsample: : 50 uL

Sample Type : Whole blood & Dialysate fluid


Analysis Time : Approximately 60 seconds to result
Calibration : Automatic or on demand

Parameters : Measured Parameters Calculated Parameters


Parameter Measurement Range Unit of Measure Parameter Measurement Range Unit of Measure
pH : 6.001 – 8.000 pH units O2 Sat : 0 -100 %
pCO2 : 5.0 – 250.0 mmHg O2 CT : 0.0 - 40.0 mL/dL
pO2 : 0.0 – 749.0 mmHg HCO3 act : 0.0 - 60.0 mmol/L
Na+ : 80 - 200 mmol/L HCO3 std : 0.0 - 60.0 mmol/L
K+ : 0.50 - 9.99 mmol/L ctCO2 : 0.0 - 60.0 mmol/L
Ca++ (*) : 0.20 - 5.00 mmol/L BE b : - 29.9 - 29.9 mmol/L
Cl- (*) : 40 –160 mmol/L BE ecf : - 29.9 - 29.9 mmol/L
Hct : 12 – 75 % pO2 (A-a) : 0.0 -749.0 mmHg
Note : (*) Choose either one pO2 (A/a) : 0.00 - 1.00 mmHg
pO2 FiO2 : 0.00 - 5.00 mmHg
Power Requirements Ca++ (7.4) : 0.20 - 5.00 mmol/L
# Voltage : 100V (85–110V), 120V (102–132V) Anion Gap : - 60 - 60 mmol/L
: 220V (187–242V), 240V (204–264V) pH (T) : 6.001 – 8.000 pH units
# Power : 80 VA H+ (T) : 10.0 - 997.0 mmol/L
# Frequency : 50/60 Hz pCO2 (T) : 5.0 – 250.0 mmHg
pO2 (T) : 0.0 – 749.0 mmHg
Environmental pO2 (A-a) (T) : 0.0 -749.0 mmHg
# Temperature : 15°C - 32°C pO2 (A/a) (T) : 0.00 - 1.00 mmHg
# Humidity : 5%–85% non-condensing ct(Hb) est : 2.0 - 25.0 g/dL
# Barometric pressure : 400–825 mmHg

Approvals : UL, CSA, IEC, EN-61010


: CE Marked with full CB Scheme and all National Deviations.
: Complies with the IVD directive

Accessories :
UPS : APC Brand with Capacity 1 KVA or equivalent

Note: (**) Instrument can be managed using a middleware solution either RAPIDComm (closed system middleware) or POCcelerator (open connectivity middleware).

Run critical care tests reliably and economically in low-volume settings

Unrestricted

You might also like