Scribd
Upload
303 views2 pages

2010 Toyota Prius Repair Manual - Maintenance - Transaxle Fluid Change

The document provides instructions for replacing the hybrid transaxle fluid in a 2010 Toyota Prius. It involves draining the old fluid by removing the drain plug, adding new fluid until it is between 0-10mm from the filler plug opening, and ensuring the new fluid level is properly checked and the filler plug is reinstalled.

Uploaded by

Xajepox
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
303 views2 pages

2010 Toyota Prius Repair Manual - Maintenance - Transaxle Fluid Change

The document provides instructions for replacing the hybrid transaxle fluid in a 2010 Toyota Prius. It involves draining the old fluid by removing the drain plug, adding new fluid until it is between 0-10mm from the filler plug opening, and ensuring the new fluid level is properly checked and the filler plug is reinstalled.

Uploaded by

Xajepox
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

REPLACEMENT

1. DRAIN HYBRID TRANSAXLE FLUID

(a) Using a 10 mm hexagon socket wrench, remove the filler plug and
gasket.

Text in Illustration
*1 Filler Plug
*2 Drain Plug

(b) Using a 10 mm hexagon socket wrench, remove the drain plug and gasket.

(c) Using a 10 mm hexagon socket wrench, install the drain plug, and a new gasket.

Torque: 39 N·m (398 kgf·cm, 29ft·lbf)

2. ADD HYBRID TRANSAXLE FLUID

(a) Add transaxle fluid until the fluid level is between 0 to 10 mm (0 to


0.394 in.) from the bottom lip of the filler plug opening.

x Stop the vehicle on a flat road.


x Recheck the transaxle fluid level after driving when exchanging
fluid.
x Insufficient or excessive amounts of transaxle fluid may be the
cause of some trouble.

Reference:

3.3 liters (3.5 US qts, 2.9 lmp.qts)

3. INSPECT HYBRID TRANSAXLE FLUID

(a) Check that the fluid level is between 0 to 10 mm (0 to 0.394 in.) from
the lowest position of the inner surface of the transaxle filler plug opening.

x Stop the vehicle on a flat road.


x Recheck the transaxle fluid level after driving when exchanging
fluid.
x Insufficient or excessive amounts of transaxle fluid may be the
cause of some trouble.

(b) Check for leaks if the quantity of transaxle fluid is low.

2010 Toyota Prius Repair Manual


(c) Using a 10 mm hexagon socket wrench, install the filler plug with a new gasket.

Torque: 39 N·m (398 kgf·cm, 29ft·lbf)

2010 Toyota Prius Repair Manual

You might also like