Marine generator set

Mechanical Series
5.5/6.5
Model MDKUB

Features and benefits

• Rugged dependability and high quality features make ABYC voluntary standards, developed to increase your
Cummins Onan Marine Generators a leading name in boating enjoyment.
the marine industry. Reliable Cummins Onan Marine
Generator sets have more standard features than any • Cummins Onan Marine Generator sets are produced by
other marine generator set available. Cummins Power Generation, a subsidiary of Cummins
• Certified to U.S. Environmental Protection Agency
Inc. Cummins Onan Marine Generator sets are
supported by the largest worldwide certified
(EPA) emission standards. distributor/dealer network in the industry. Our extensive
• The Cummins Onan Marine Generators designed and warranty coverage provides owner peace of mind.
manufactured high efficiency alternator delivers the
power you need with excellent load response and AC • Cummins Onan Marine Generator sets are
output characteristics. This alternator is protected with complemented by a full line of accessories, making it
corrosion-resistant resins for salt water environments. easy to customize a generator set to suit your
application. Cummins Onan Marine Generator sets are
• Cummins Onan Marine Generator sets are designed for easy to install, operate and maintain, plus they are small
compliance with U.S. Coast Guard regulations and in size.

• More than 70 years of marine experience, gained by

supplying generator sets to the U.S. Coast Guard, Navy,
recreational boaters and some of the finest yacht
builders in the world, stand behind every Cummins Onan
Marine Generator set.

Models and ratings

Model kW/kVA Voltage Amps Phase Hz Engine RPM
5.5MDKUB 5.5/5.5 110/220 50/25 1 50 3000
115/230 47.8/23.9 1 50 3000
120/240 45.8/23 1 50 3000
6.5MDKUB 6.5/6.5 120 54.2 1 60 3600
120/240 54/27.1 1 60 3600
Three phase and other single phase configurations are available, contact your distributor/dealer for more information. Rating conditions are 100
kPa (29.6 in Hg) barometric pressure, 30% relative humidity and 25° C (77° F) (ref. ISO 3046).

Sound level, weight, and size

Sound level Dimensions
50 Hz configuration 60 Hz configuration Weight (dry) Length Width Height
69 dB(A)* 71 dB(A)* 173 kg (380 lb) 709 mm (28 in) 552 mm (21.75 in) 596 mm (23.5 in)

* Full load at 1 m

Cummins®, Onan®, the "C" logo and Performance you rely on.™ are servicemarks, trademarks and/or registered trademarks of Cummins Inc. / Specifications subject to change without notice /
©2008 Cummins Power Generation. All Rights Reserved.
A-1350f (2/08)
Standard features
• Switchable between 50/60 Hz • Running time meter
• Single phase AC alternator with single or dual voltages • Air intake silencer
• Solid state voltage regulator • Full flow lube oil filter
• Capped voltage regulator for stability as appliance load • Oil drain with valve and hose extension
changes • Electric fuel shut-off solenoid
• 12 V DC electric system with battery charging, negative • Fuel filter/water separator
ground • Drip pan base capable of containing all generator set
• DC control console mounted with isolation and DC fluids
protective circuit breakers • Captive focalized mounting systems with vibration
• Start-run-stop switch with glow plug preheat for easy isolators
starting • Bulk head type connections for ease of installation
• Electric fuel pump for lift capability • Single point lifting bracket for ease of installation
• Engine starter with automatic start disconnect • Sound shield housing
• Freshwater cooling system with heat exchanger, • Plug-in watertight connector for optional remote control
expansion tank and coolant recovery system • Closed crankcase breather re-circulation to eliminate
• Water cooled exhaust mixing elbow engine room contamination
• Gear-driven raw water pump • Coolant overflow bottle to easily maintain coolant level
• AC mainline circuit breaker • Factory load tested
• Field circuit breaker • Five year limited warranty
• Engine shutdown for: high engine coolant temperature, • DNV type approval
high exhaust temperature, low oil pressure and
additional customer input

Engine details
Design: 4-cycle, water-cooled diesel Raw water flow rate:
Cylinders: 2 50 Hz: 11.4 L/min (3.0 Gal/min)
Bore: 67 mm (2.64 in) 60 Hz: 13.2 L/min (3.5 Gal/min)
Stroke: 68.0 mm (2.68 in) Starting system: 12 V
Displacement: 479 cm3 (29.23 in3) Power (max): SAEJ1995
Compression ratio: 23.5:1 50 Hz at 3000 RPM 8.7 kW (11.7 hp)
Max fuel lift: 1.22 m (4 ft) 60 Hz at 3600 RPM 9.5 kW (12.7 hp)
Lube oil capacity: 3.8 L (4 qt) Fuel Injection pump: Bosch MD type
Coolant capacity: 2.2 L (2.3 qt) Combustion chamber: Spherical
Coolant flow rate: Max raw water lift: 1.22 m (4 ft)
50 Hz: 24.6 L/min (6.5 Gal/min)
60 Hz: 29.9 L/min (7.9 Gal/min)
Typical fuel consumption
No. 2 diesel fuel, L/hr (Gal/hr)
Half load Full load
5.5 MDKUB-50 Hz 1.5 (0.4) 2.1 (0.6)
6.5 MDKUB-60 Hz 1.7 (0.5) 2.7 (0.7)

Alternator details Generator set performance

Design: Cummins Onan revolving field, 2-pole, drip proof Operating environment: Generator sets are durability
construction, with encapsulated rectifiers tested at maximum ambient air temperature: 80° C (176° F);
Voltage regulator: Solid state capped voltage regulator; raw water temperature 37.8° C (100° F)
no SRC tracking problems Frequency regulation: 5% no load to full load
Stator: Skewed stator and 2/3 pitch windings minimize Random frequency variation: Will not exceed +/-0.5%
field heating and voltage harmonics; resin-coated for of its mean value for constant loads from no load to full load
corrosion protection Voltage regulation: No load to rated load +/-1.5%
Rotor: Dynamically balanced assembly; supported by Random voltage variation: Will not exceed +/-1% of its
pre-lubricated, maintenance-free ball bearing mean value for constant loads from no load to full load
Cooling: Rotor mounted centrifugal blower
Insulation system: Class H per NEMA MG1-1.65

Cummins®, Onan®, the "C" logo and Performance you rely on.™ are servicemarks, trademarks and/or registered trademarks of Cummins Inc. / Specifications subject to change without notice /
©2008 Cummins Power Generation. All Rights Reserved.
A-1350f (2/08)
Basic dimensions

Note: This outline drawing is provided for general reference only and is not intended for design or installation. For more information see
Operation and Installation manuals or obtain drawing 500-2824 and wiring diagram from your distributor/dealer.

Options
• Oil level indicator access from sound shield roof panel

Accessories
• Basic remote start/stop switch • Siphon break kit
• Deluxe remote start/stop switch with hour meter • Wet exhaust hose
• Deluxe remote start/stop switch with DC voltmeter • Battery
• Remote station harness pigtail • Marine muffler and water separator - dual silencers
• Remote panel wire harness - 15 ft, 25 ft, 45 ft, 75 ft, 100 • Isolated DC control conversion kit
ft or 150 ft • Ship-to-shore selector switch, single phase, 2 or 3 wire
• Remote gauge package with start/stop switch, hour output
meter, DC voltmeter, oil pressure and water • Oil level indicator kit for access from outside sound
temperature gauges; select appropriate sender kit for shield; requires installer to modify
negative ground or isolated DC sound shield roof
• Line circuit breakers for field conversion of frequency or • Cruise kit - maintenance parts - fuel
AC voltage output filters, oil filters, sea water pump
• Remote fuel filter/water separator assembly impellers, zinc pencils, alternator belt
and plastic container
Cummins Onan Cruise Kit

Cummins®, Onan®, the "C" logo and Performance you rely on.™ are servicemarks, trademarks and/or registered trademarks of Cummins Inc. / Specifications subject to change without notice /
©2008 Cummins Power Generation. All Rights Reserved.
A-1350f (2/08)
Standards and testing After sale support
National Marine Manufacturers Association (NMMA) Largest distributor/dealer support network
members produce every conceivable product used by Cummins Onan generator sets are supported by the largest
recreational boaters. NMMA provides a wide variety of and best trained worldwide certified distributor/dealer
programs and services including technical expertise, network in the industry. This network of knowledgeable
standards monitoring, government relations advocation Cummins Onan distributor/dealers will help you select and
and industry statistics. install the right generator set and accessories to meet the
The American Boat and Yacht Council (ABYC) develops requirements of your specific application. This same
standards and recommended practices for designing, network offers a complete selection of commonly used
constructing, equipping and maintaining small pleasure generator set maintenance parts accessories and products
and commercial craft. plus manuals and specification sheets. Plus, they can
answer your questions regarding proper operation,
This generator set was designed and manufactured in
maintenance schedules and more.
facilities certified to ISO 9001.
Manuals: Operation, installation and parts manuals ship
Lloyd’s Register states that Cummins Onan Marine
with the generator set. To obtain additional copies or other
Generators have been successfully tested in accordance
manuals for this model, see your Cummins Onan
with the relevant requirements of the Lloyd’s Register Type
distributor/dealer and request the following manual
Approval System for Marine, offshore and industrial
numbers: Operation (981-0151), Installation (981-0602),
applications.
Parts (981-0262), Service (981-0512).
To easily locate the nearest Cummins Onan
distributor/dealer in your area, or for more information,
contact us at 1-800-888-6626 (or 763-574-5000), or visit
Warranty policy www.cumminsonan.com.

The Cummins Onan express, written limited warranty

covers virtually everything except routine maintenance for
the first two years you own your marine generator set, and
covers parts and labor on major power train and generator
set parts during the third through fifth years.

! WARNING:
Back feed to a utility system can cause
electrocution and/or property damage.
Do not connect to any building electrical
except through an approved device or
after building main breaker is open.

Contact your distributor/dealer for more information

Cummins Power Generation

1400 73rd Ave. NE
Minneapolis, MN 55432 USA
Phone 1 763 574 5000
Toll-free 1 800 888 6626
Fax 1 763 574 5298
Email www.cumminsonan.com/contact
www.cumminsonan.com
Cummins®, Onan®, the "C" logo and Performance you rely on.™ are servicemarks, trademarks and/or registered trademarks of Cummins Inc. / Specifications subject to change without notice /
©2008 Cummins Power Generation. All Rights Reserved.
A-1350f (2/08)