Scribd
Upload
20 views

Switch01c - Neo

This document provides an application guide for installing Schneider Electric switch products. It includes specifications on voltage and current ratings, mounting dimensions, important safety notes, wiring diagrams for various switch configurations including 1-way, 2-way, intermediate and double pole switches. Installation instructions are given to remove the cover, connect wires, secure the grid plate and snap the cover back on.

Uploaded by

Rian Heriawan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
20 views

Switch01c - Neo

This document provides an application guide for installing Schneider Electric switch products. It includes specifications on voltage and current ratings, mounting dimensions, important safety notes, wiring diagrams for various switch configurations including 1-way, 2-way, intermediate and double pole switches. Installation instructions are given to remove the cover, connect wires, secure the grid plate and snap the cover back on.

Uploaded by

Rian Heriawan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

APPLICATION GUIDE

Switch

Thank you for choosing S ch n e i de r E l e ctri c products. Please read through the
TM

following information before installation and use.

SPECIFICATIONS
Rated Voltage : 25 0 V ~ Rated Current : Refer to product marking
Mounting centre : 60 .3 /1 2 0 .6 mm

IMPORTANT NOTE

1. The product must be installed by a qualified electrician.


2. Please check your local wiring regulations before installation.
3. Please install with standard wall box to aid correct operation of the product.
4. Please keep the front cover safe in order to prevent damages before and during
installation.
5. Turn off the power supply when cleaning the product. Use a piece of soft and dry
cloth to wipe off the dirt and contamination on the surface. Do NOT use corrosive
chemicals.
6. Shield / mask the product before renovation to avoid contamination and
degradation.

WIRING DIAGRAMS
1Way switch

Live
COM L
Load
1Way switch

Neutral
2Way switch
L1 L1
Live
COM COM
L2 L2
Load
2Way switch 2Way switch

Neutral

1Way switch with LED Cur tain Switch

L1
COM L Curtain Switch Load
Live
Live
COM Load
Load
L ED L2

Neutral Neutral
2Way switch with LED
L1 L1
Live
COM COM
L2 L2

Load

LED LED
Neutral
1-4 Gang 1Way switch 1-4 Gang 2Way switch
L#1 L#1
COM# COM# COM#
Live L#1 Live
L#2 L#2
Note：# means 1/2/3/4 Gang Load#
Load#
Note：# means 1/2/3/4 Gang
Neutral Neutral
I n t e rm e d i a t e S w i tch
2W switch Intermediate Switch Intermediate Switch 2W switch
L1 1 2 1 2 L1
Live
COM COM
L2 3 4 3 4 L2
Load
May be have one or more intermediate switch between the 2W switch
Neutral

1Way Double Pole Switch with LED 1Way switch with Neon
1 2
Live Live
COM L

LED Load Neon


Load
Neutral
3 4
Neutral

MOUNTING INSTRUCTION

1.Remove the product cover and safekeeping .


2.Connect the wires to the terminals and tighten the terminal screws.
3.Screw the grid plate onto the wall box.
4.Snap the product cover.

Wall Box

Grid Plate

Mounting
Screw

Product cover

*Picture is for reference only

You might also like