Master class (description of knitting)

"Enoch Tory" crochet by

Hello! Probably everyone likes raccoons! Today we will tie a crumb, or maybe the
entire trio at once? These kids will not let you get bored, and I'll try to show the
creation process in more detail. Go!

1
 Materials and tools:

 Gray yarn, I have wool 100% 400 m per 100 g

 Black and white mohair, a thickness of about 500 m per 100 g
 Glass eyes 4 mm in diameter
 Black and white iris, eye sewing thread
 Wool for felting dark gray and black colors
 Hook 1.5 mm
 Needle for felting
 Needles for sewing parts and embroidery elements (with a large eyelet)
 Bullets, a marker for marking the beginning of a series
 Filler (sintepon / holofiber)
 Pliers, round-nosed pliers (for convenience of drawing out needles)
 Fittings for decoration
 Oil pastel for toning

Legend:

 сбн - sc – single crochet

 пр - inc – increase (From one eyelet we sew 2 sc)
 уб - dec(s) – decrease(s) (2 Of the following сбн We tie together)
 ка – magic ring
 вп - ch – chain
 сс – sl st - Slip stitch

2
Head *, start from the top:

1. 6 sc at mr (6)
2. 6 inc (12)
3. (sc, inc)*6 time (18)
4. (2 sc, inc)*6 time (24)
5. (3 sc, inc)*6 time (30)
6. (4 sc, inc)*6 time (36)
7. – 9. In each loop we sew on the 1 st sc (36)
10. 4 sc, (sc, inc)*3 times, 12 sc, (sc, inc)*3 times, 8 sc (42)
11. 42 sc
12. (5 sc, dec)*6 time (36)
13. (4 sc, dec)*6 time (30)
14. (3 sc, dec)*6 time (24)
15. (2 sc, dec)*6 time (18)
16. (sc, dec)*6 time (12)

We begin to fill our head. We make sure that the

filler inside is distributed uniformly, and the shape
of the head remains symmetrical.

17. Carry out (6 dec), knitting do not close.

* How to fasten the head with a cotter pin, see page 5

3
Torso *, knit from below:

1. 6 sc at mr (6)
2. 6 inc (12)
3. (sc, inc)*6 time (18)
4. (2 sc, inc)*6 time (24)
5. (3 sc, inc)*6 time (30)
6. (4 sc, inc)*6 time (36)
7. 36 sc
8. (4 sc, dec)*6 time (30)
9. 30 sc
10. (3 sc, dec)*6 time (24)
11. – 12. 24 sc
13. (2sc, dec)*6 time (18)
14. 18 sc
15. (sc, dec)*6 time (12)
16. 12 sc

We stuff the body and

perform 6 dec.
* With the usual sewing method of
fastening to the head

4
If we want to perform a cotter pin, we will need:

2 discs with a diameter of 12mm and 9mm, as well as 2 o-pins 1.6 * 20mm.

I will show on the example of a bear how to attach a head to the body in this way:

We insert both cotter pins into each other, from above we thread the disc 12
mm, round-bends wrap the edges of the cotter pin as shown in the photo.
All this design is inserted into the hole at the bottom of the head on the 16th
row, the cotter is inserted between the 16th and 15th rows. Carry out
adjustments in a circle and close knitting.

Body knit top-down, according to the scheme:

1. 6 sc at mr (6)
2. 6 inc (12)
3. 12 sc
4. (sc, inc)*6 time (18)
5. 18 sc
Here we attach the body to the head, thread it on the cotter pin,
insert the disc, wrap the round-lip ends of the cotter pin and
continue knitting.
6. (2 sc, inc)*6 time (24)
7.-8. 24 sc
9. (3sc, inc)*6 time (30)
10. 30 sc
11. (4 sc, inc)*6 time (36)
12. 36 sc
13. (4 sc, dec)*6 time (30)
14. (3 sc, dec)*6 time (24)
15. (2 sc, dec)*6 time (18)
16. (sc, dec)*6 time (12)
17. Stuff the body, we perform 6 уб And close the knitting.

5
Ears (2 parts):
1. 6 sc at mr (6)
2. 6 inc (12)
3. 12 sc (12)
4. (3sc, inc)*3 times (15)

Tail:
Let's start with gray yarn
1. 6 sc at mr (6)
2. 6 inc (12)
3. (inc, sc)*6 time (18)
4. 18 sc
5. Change the thread to black and knit 18 sc
6. Change the thread to gray, 18 sc
7. 18 sc
8. Black thread 18 sc
9. Gray thread 18 sc
10. 18 sc
11. Change the thread to black, 18 sc
12. – 13. 18 sc Gray thread

14. (sc, dec)*6 time (12)

15. 12 sc.

16. We fill the tail, we perform 6 dec.

6
Handles (2 parts):
1. 4 sc at mr, Turn the part "on the wrong side"

2. We untangle fingers: 3 ch, The second from the hook

we sew a loop sl, In the next loop sl, One more sl In a
loop of mr. Now we are tying sl In the next loop mr, Do
3ch And repeat the action as in the first finger. The third
finger is knitted like the second, only the last one sc We sew
in an extreme loop mr.

3. Doing sl In the middle mr, 3 ch, The second from the hook loop sl, sl into
the next loop, sl In the base of the first finger.

7
Gray thread:

1. 6 sc at mr (6)

2. (sc, 2 inc)*2 time (10)

3. – 4. 10 sc, At this stage it is convenient to sew the palm

5. – 8. 10 sc

9. Slightly stuff the handle, perform the adjustments and close the

knitting. Output the thread between the 7th and 8th rows

8
Legs (2 parts):
Black begins to knit heels:

1. 6 ch, The second from the hook we sew a loop inc, Then in
the next 3 loops we sew on 1 sc, In the next loop of the chain
we sew 3 sc, In the remaining 4 loops we sew on 1 sc. (12)
2. (2 inc, 4 sc)*2 time (16)

3. 16 sc

9
4. We send 4 sc, Further do sl In the first loop of the row. Further we make inc
and 2 sc.

10
Crop the thread, leaving the end about 25 cm. Now we need to sew our foot.
Sew the stitches "cut" as in the photo:

We hide the tail of the thread, we do not stuff a foot! Now we need to designate
the fingers. For this we will make a few stitches in the area of the thumb. The
right and left feet, respectively.

11
In the photo there is a left
foot. For the thumb, we just
stitch the right corner a few
times.

We should have something

like this:

12
Next, take the gray yarn and knit "shin":

1. 6 sc at mr (6)

2. 6 inc (12)

3. – 4. 12 sc

5. (3sc, inc)*3 time (15), at this stage

Sew your feet

6. (4sc, inc)*3 time (18)

7. (sc, dec)*6 time (12), Stuff a leg

13
8. Выполняем 6 уб, закрываем вязание. Нить выводим между 5-м и 6-м
рядами.

We proceed to the design of face:

1. White yarn is typed 6ch, The second from the hook loop make inc, further 3 sc,
In the next loop we sew 3sc, Then in the remaining 4 Hinges on 1 sc In each. (12)

2. 7sc, 2 inc, sl, 2 inc (16), further 2 sl For an even edge.

14
Берем черный ирис в два сложения и аккуратными стежками начинаем
вышивать носик. Носик должен получиться относительно небольшой:

In one thread we make a sl from the center of the bottom of the nose in our

face: we fix the threads from the wrong side. We pin our pins

15
Spout to head approximately between the 9th and 13th rows. Sew on a
circle, do not forget to fill it well with filler.

16
Now take the wool for felting and the needle. If you suddenly, for some
reason do not know how to play or are afraid, you can do with toning.

"Drawing" our raccoon face.

Before starting felting, you can outline the contours of a simple pencil.
Do not be afraid to make an uneven edge, we will embroider the white
"brow" and correct the irregularities. I knowingly chose 100% wool in
the composition of yarn, since it is much easier to coat with wool than,
for example, cotton.

17
After we have pierced the dark drawing of the raccoon's muzzle, we'll make
small suits so that the eyes will sit in the grooves.

The photo below shows the points for the ducks. We fix the thread around the
neck and remove the needle at point 1, then insert the needle into point 2 and
draw it at the base of the head. Applying small efforts, tighten. With the second
eye, we repeat the same thing. Output the needle at point 3 and enter into point
4. We bring the needle into the hole where our head will be fastened, tighten and
fix the thread. Done!

18
19
Now take our eyes, thread a thread in the eye, we flatten the ear with
thin-nosed pliers:

Sew our eyes, foot into the recess. The eyes should be located 5 sc:

20
We will add a little black wool, for a depth of view:

It is important to add
wool in small
amounts, as if
shading eyes.

21
Do under each eye on the stitch white iris:

Then, with light gray hair, we hang eyelids:

22
Now the most interesting is =)

We will embroider the white yarn, from which we knit the mace, the brow of
our raccoon. One stitch, from top to bottom. Take the thread longer, enough
for both halves of the pug.

23
Gradually narrow the stitches, as shown in the photo below:

We make a
couple more
stitches near the
"bridge of the
nose", as if to
round off our
"crook":

One half is ready,

we embroider the
second by
analogy.

24
 Here's a handsome guy we should get:

We decorate the ears.

We take our ears and dark gray hair for felting and we put it in the middle:

25
Here's what we should get:

Next, with white yarn, we lace the eye along the contour, for greater naturalness

Since we are embroidering with mohair, and this thread is not exactly intended
for such actions, we make sure that it does not get tangled in the nodules, neatly
straightening it during stretching. Thus, we make stitches along the entire outer
edge of the eyelet.

26
27
After the ears are ready, we pin them with pins to the head, try on. We
make sure that the ears are located symmetrically, approximately
between the 4th and 9th rows of the head. Sewing.

We sew the back part and middle of the ear with the end of the gray thread,
and on the sides white.

We hide all the excess ends of the threads, leaving only the gray, for sewing
the head to the body.
28
Assembly.

Handles and legs will be sewn with a

threaded attachment to maintain
mobility.

Reminder just in case:

29
First of all, attach the legs with pins, between the 6th and 7th row of the
trunk.

After we sewed up the legs, we sew the tail.

30
Count 3 rows on top of our torso and pin the hands with pins. Check the
symmetry and sew!

All the ends of the threads are fixed and hidden inside the body. We pin
the head with a pin. And sew in a circle.

31
It remains to make a tint, a thin stripes between the eyes and ready!
You can show off 

Attention: This master-class is an

author's development! The master
class is not intended for commercial
use, copying completely or partially is
unacceptable! You can dispose of the
finished toy at your own discretion.
When publishing a finished work,
please do not forget to specify the
author of the description - it's not
difficult for you, but it's nice for me!
Thank you for understanding and
respect for my work!

Я вконтакте: vk.com/nansyoops

Instagram: @nansyoops

Shop at the Fair of Masters: livemaster.ru/ankris

I hope you enjoyed this master class and look forward to your raccoons! With respect,

Anastasia Kirsanova.

32