Client: Puma Energy Bitumen Vietnam Ltd.

,
Project: Bitumen storage and Distribution Terminal Project
at Tam Hiep IZ, Quang Nam Province, Vietnam

Specification and datasheet for Control valves

CONTRACTOR:

MK Bui Nguyen Construction JSC

No.631 Binh Gia Street, Thang Nhat Ward,
Vung Tau City, Vietnam

CONSULTANT:

Tebodin Vietnam Co., Ltd.

6th Floor, Quy Hanh Building
165 Ba Trieu, Le Dai Hanh Ward,
Hai Ba Trung District, Hanoi
Vietnam

Author: Nguyen Dinh Tuan

- Telephone:
- E-mail:

Jun 22, 2016

Order number: 63T85041
Document number: 4395001
Revision: 00

1
MK Buinguyen Vietnam Co., Ltd.
Specification and datasheet for Control valve
Order number: 63T85041
Document number: 4395001
Revision: 00
Jun 22, 2016
Page 2 / 11

00 22th Jun, 2016 Issue for Tender N.D.T N.D.T

C 06th Jun, 2016 Issue for Approval N.D.T N.D.T
B 24th May, 2016 Issue for Approval N.D.T N.D.T
A 04th May, 2016 Issue for Comment N.D.T N.D.T
Rev. Date Description Author Checked by

© Copyright Tebodin

All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means without
permission of the publisher

2
 Project no: 63T85041
Document no: 4395001
Revision: 00

SPECIFICATION FOR CONTROL VALVE

1. APPLICABLE CODES AND STANDARDS

The requirements contained in the following standards and recommendations shall form a part of
the requirements of this specification:
 ANSE B16.10 Face-to-face and end-to-end dimensions of valves
 ASME B16.5 Pipe Flanges and Flanged Fittings
 ASME SP-42 Corrosion Resistant Goble Valves with Flange and Butt-Weld
 ASME SP-61 Pressure Testing Valves
 IEC-529 Degree of protection provided by enclosures (IP Code)

2. EQUIPMENT MARKING & IDENTIFICATION

2.1 Marking

All wetted parts including flanges shall be marked in accordance with the relevant material
standards.

2.2 Instrument identification

All instrument (panels, junction boxes, field instruments etc.) shall be provided with a corrosion
resistant identification plate permanently attached by means of manufacturer's standard.
The following information shall be provided as a minimum:
- tag number
- manufacturer's name or trade mark
- manufacturer's model number
- body material
- body rating
- manufacturer's serial number
- flange rating including units
- range including units of measure
- output signal including units
- power supply voltage including units
- Cv value

2.3 Terminals

Each terminal shall be clearly and permanently identified. When there is more than one terminal
strip in an enclosure, then each strip shall be clearly and uniquely identified.

3. GENERAL REQUIREMENTS

3.1 Actuator

The actuator shall function as specified when supplied with an air pressure as indicated in the
datasheet with dry lubricant free air, dewpoint -40 ºC unless specified otherwise. Make of actuator
shall be manufacturer standard.

3.2 Positioner

Make of positioner shall be manufacturer standard according to standard VDI/VDE 3845.

The positioner shall be equiped with a regulator & filter with pressure gauge (if positioner can
withstand maximum air supply pressure only filter is required).
The positioner shall be IP-65 or better.
The positioner shall have a gland suitable for a cable: CVVS-1P-1.5 sq.mm
 Project no: 63T85041
Document no: 4395001
Revision: 00

B 5/24/2016 Issue For Tender N.D.T N.D.T N.H.N

C 6/6/2016 Issue For Approval N.D.T N.D.T N.H.N
B 5/24/2016 Issue For Review N.D.T N.D.T N.H.N
A 5/4/2016 Issue For Review N.D.T N.D.T N.H.N
Rev. Date Description/Issued for By Ckd Aproval
 Project no: 63T85041
Document no: 4395001
Revision: 00

DATA SHEET FOR CONTROL VALVE

Client : PUMA ENERGY VIETNAM LTD Project : BITUMEN STORAGE AND DISTRIBUTION TERMINAL PROJECT
Rev

Rev
Units Units
1 GENERAL: 60 GENERAL:
2 Tag number TCV-10101 61 Plant / Unit Utility Hot oil
3 Service TCV - heating coil 62 Location outdoor
4 Line No. 6"-HO-201009-BC-IH-75 63 Flammable atmosphere Zone 2
5 Piping Class/Code BC 64 Gas group IIA
6 P&ID number 3143101 65 Temp category T3
7 66
8 67
9 VALVE BODY DATA: 68 ACTUATOR DATA:
10 Valve type Globe Valve 69 Valve Action on Air Failure Close
11 Process Connection Flange ASME B16.5 70 Actuator Type Spring Return
12 Flange Size / Rating inch/lbs * / 300# 71 Actuator Position Standard
13 Flange facing / finish µm RF / 125 AARH 72 Actuator Supply Pressure Range bar 7.0/ 4.0
14 Body material CS 73 Handwheel / Orientation N/A / -
15 Flange material CS 74 Manufacturer / Model number * / *
16 Bellows / bellows material NA / NA 75
17 Bonnet material CS 76 POSITIONER DATA:
18 Packing box construction / material * 77 Manufacturer / Model number * / *
19 Bonnet gasket material SS316 78 Input signal / HART 4 - 20 mA / no
20 Flow tending to 79 Positioner action / Load resistance Direct / < 300 W
21 TRIM DATA : 80 Explosion prot. cert. Eex'ia'
22 Trim type / Size Standard / * 81
23 Plug / disk material SS316 82 LIMIT SWITCH DATA : NA
24 Seat material SS316 83 Tag number open position
25 Seat gasket material * 84 Tag number close position
26 Stem material / diameter SS316 / * 85 Manufacturer / Model number /
27 Characteristic of Trim * 86 Explosion prot. cert.
28 Leakage class IV 87
29 88 SOLENOID VALVE Yes
30 Cv required Cv selected * * 89 Tag number SV-10101 /
31 PROCESS DATA: 90 Solenoid valve type
32 Medium / phase Hot oil / Liquid 91 Power Supply 24VDC
33 Operating conditions Min flow Norm flw Max flow 92 Vent action de-energy
34 Flow m3/hr 22.38 44.75 44.75 93 Option NA/Reset level
35 Pressure (upstream) barg 5.2 3.2 3.2 94 Manufacturer / Model number * /
36 Pressure drop bar 4.48 1.78 1.78 95 Explosion prot. cert. Eex'd'
37 Temperature ºC 260 260 260 96 ACCESSORIES
38 Density kg/m3 719 719 719 97 Air filter regulator / Setting barg Yes / *
39 Viscosity cP 0.747 0.747 0.747 98
40 Cv/Cp Compressibility factor - - 99
41 Vapour pressure bar 0.03 100
42 Critical pressure bar - 101
43 Calculated Cv - 102 SPECIAL REQUIREMENTS:
44 Calculated noise dB(A) * * * 103 Material certificate EN10204-3.1
45 MW for gas Tsh (steam) ºC - - 104 Test requirements Vendor standard
46 Choked flow / Cavitation * 105 Fire safe design valve No
47 Flashing (%) Solids (%) NA NA 106 SIL (loop) / Architecture / Type / SFF NA
48 Solids (soft/abrasive) NA 107 ldd / ldu / lsd / lsu FIT NA
49 Max. Allowed sound level dB(A) 108 NON-VENDOR RELATED INFO:
50 Shut-off D P bar 8 109
51 Design pressure barg 8 110
52 Design temperature ºC 300 111
53 Min. / Max. ambient temperature ºC 16/45 112
54 PURCHASEDATA: 113 REMARKS:
55 Manufacturer * 114 * to be filled in by vendor
56 Model number * 115
57 Serial number * 116
58 Supplier * 117
59 Item quantity 1 118

00 6/22/2016 Issue For Tender N.D.T N.D.T N.H.N

C 6/6/2016 Issue For Approval N.D.T N.D.T N.H.N
B 24/05/2016 Issue For Approval N.D.T N.D.T N.H.N
A 5/4/2016 Issue For Review N.D.T N.D.T N.H.N
Rev. Date Description/Issued for By Ckd Aproval
 Project no: 63T85041
Document no: 4395001
Revision: 00

DATA SHEET FOR CONTROL VALVE

Client : PUMA ENERGY VIETNAM LTD Project : BITUMEN STORAGE AND DISTRIBUTION TERMINAL PROJECT
Rev

Rev
Units Units
1 GENERAL: 60 GENERAL:
2 Tag number TCV-10102 61 Plant / Unit Utility - hot oil
3 Service TCV - suction heater 62 Location outdoor
4 Line No. 4"-HO-201010-BC-IH-65 63 Flammable atmosphere zone 2
5 Piping Class/Code BC 64 Gas group IIA
6 P&ID number 3143101 65 Temp category T3
7 66
8 67
9 VALVE BODY DATA: 68 ACTUATOR DATA:
10 Valve type Globe Valve 69 Valve Action on Air Failure Close
11 Process Connection Flange ASME B16.5 70 Actuator Type Spring Return
12 Flange Size / Rating inch/lbs * / 300# 71 Actuator Position Standard
13 Flange facing / finish µm RF / 125 AARH 72 Actuator Supply Pressure Range bar 7.0/ 4.0
14 Body material CS 73 Handwheel / Orientation N/A / -
15 Flange material CS 74 Manufacturer / Model number * / *
16 Bellows / bellows material NA / NA 75
17 Bonnet material CS 76 POSITIONER DATA:
18 Packing box construction / material * 77 Manufacturer / Model number * / *
19 Bonnet gasket material SS316 78 Input signal / HART 4 - 20 mA / no
20 Flow tending to 79 Positioner action / Load resistance Direct / < 300 W
21 TRIM DATA : 80 Explosion prot. cert. Eex'ia'
22 Trim type / Size Standard / * 81
23 Plug / disk material SS316 82 LIMIT SWITCH DATA : NA
24 Seat material SS316 83 Tag number open position
25 Seat gasket material * 84 Tag number close position
26 Stem material / diameter SS316 / * 85 Manufacturer / Model number /
27 Characteristic of Trim * 86 Explosion prot. cert.
28 Leakage class IV 87
29 88 SOLENOID VALVE NA
30 Cv required Cv selected (*) * 89 Tag number /
31 PROCESS DATA: 90 Solenoid valve type
32 Medium / phase Hot oil / Liquid 91 Power Supply
33 Operating conditions Min flow Norm flw Max flow 92 Vent action
34 Flow m3/hr 35 70 70 93 Option
35 Pressure (upstream) barg 5.2 3.2 3.2 94 Manufacturer / Model number /
36 Pressure drop bar 4.58 2.11 2.11 95 Explosion prot. cert.
37 Temperature ºC 260 260 260 96 ACCESSORIES
38 Density kg/m3 719 719 719 97 Air filter regulator / Setting barg Yes / *
39 Viscosity cP 0.747 0.747 0.747 98
40 Cv/Cp Compressibility factor - - 99
41 Vapour pressure bar 0.03 100
42 Critical pressure bar - 101
43 Calculated Cv - 102 SPECIAL REQUIREMENTS:
44 Calculated noise dB(A) * * * 103 Material certificate EN10204-3.1
45 MW for gas Tsh (steam) ºC - - 104 Test requirements Vendor standard
46 Choked flow / Cavitation * 105 Fire safe design valve No
47 Flashing (%) Solids (%) NA NA 106 SIL (loop) / Architecture / Type / SFF NA
48 Solids (soft/abrasive) NA 107 ldd / ldu / lsd / lsu FIT NA
49 Max. Allowed sound level dB(A) 108 NON-VENDOR RELATED INFO:
50 Shut-off D P bar 8 109
51 Design pressure barg 8 110
52 Design temperature ºC 300 111
53 Min. / Max. ambient temperature ºC 16/45 112
54 PURCHASEDATA: 113 REMARKS:
55 Manufacturer * 114 * to be filled in by vendor
56 Model number * 115
57 Serial number * 116
58 Supplier * 117
59 Item quantity 1 118

00 6/22/2016 Issue For Tender N.D.T N.D.T N.H.N

C 6/6/2016 Issue For Approval N.D.T N.D.T N.H.N
B 5/24/2016 Issue For Review N.D.T N.D.T N.H.N
A 5/4/2016 Issue For Review N.D.T N.D.T N.H.N
Rev. Date Description/Issued for By Ckd Aproval
 Project no: 63T85041
Document no: 4395001
Revision: 00

DATA SHEET FOR CONTROL VALVE

Client : PUMA ENERGY VIETNAM LTD Project : BITUMEN STORAGE AND DISTRIBUTION TERMINAL PROJECT
Rev

Rev
Units Units
1 GENERAL: 60 GENERAL:
2 Tag number WCV-10401 / 10402 61 Plant / Unit Process-Bitumen
3 Service Flow Control Valve 62 Location Outdoor
4 Line No. 4"-P-102010 / 103001-AC-HT-50 63 Flammable atmosphere Zone 2
5 Piping Class/Code AC 64 Gas group IIA
6 P&ID number 3143104 65 Temp category T3
7 66
8 67
9 VALVE BODY DATA: 68 ACTUATOR DATA:
10 Valve type Globe Valve 69 Valve action on air failure Close
11 Process connection Flange ASME B16.5 70 Actuator type *
12 Flange Size / rating inch/lbs * / 150# 71 Actuator position Standard
13 Flange facing / finish µm RF 72 Actuator supply pressure range bar 7.0/ 4.0
14 Body material CS 73 Handwheel / orientation N/A / -
15 Flange material CS 74 Manufacturer / Model number * / *
16 Bellows / bellows material NA / NA 75
17 Bonnet type / material CS 76 POSITIONER DATA:
18 Packing box construction / material * 77 Manufacturer / Model number * / *
19 Bonnet gasket material SS 316 78 Input signal / HART 4 - 20 mA / no
20 Flow tending to 79 Positioner action / Load resistance Direct / < 300 W
21 TRIM DATA : 80 Explosion prot. cert. Eex'ia'
22 Trim type / Size Standard / * 81
23 Plug / disk material SS 316 82 LIMIT SWITCH DATA : NA
24 Seat material SS 316 83 Tag number open position
25 Seat gasket material * 84 Tag number close position
26 Stem material / diameter SS 316 / * 85 Manufacturer / Model number /
27 Characteristic of Trim * 86 Explosion prot. cert.
28 Leakage class IV 87
29 88 SOLENOID VALVE NA
30 89 Tag number /
31 PROCESS DATA: 90 Solenoid valve type
32 Medium / phase Bitumen / PMB Liquid 91 Power Supply
33 Operating conditions Min flow Norm flw Max flow 92 Vent action
34 Flow m3/hr 30 60 60 93 Option
35 Pressure (upstream) barg 7.13 5.69 5.69 94 Manufacturer / Model number /
36 Pressure drop bar 6.32 4.69 4.69 95 Explosion prot. cert.
37 Temperature ºC 150 150 150 96 ACCESSORIES
38 Density kg/m3 953.5 953.5 953.5 97 Air filter regulator / Setting barg Yes / *
39 Viscosity cP 640 640 640 98
40 Cv/Cp Compressibility factor - - 99
41 Vapour pressure bar 0.01 100
42 Critical pressure bar - 101
43 Calculated Cv - 102 SPECIAL REQUIREMENTS:
44 Calculated noise dB(A) * * * 103 Material certificate EN10204-3.1
45 MW for gas Tsh (steam) ºC - - 104 Test requirements Vendor standard
46 Choked flow / Cavitation * 105 Fire safe design valve No
47 Flashing (%) Solids (%) NA NA 106 SIL (loop) / Architecture / Type / SFF NA
48 Solids (soft/abrasive) NA 107 ldd / ldu / lsd / lsu FIT NA
49 Max. Allowed sound level dB(A) 108 NON-VENDOR RELATED INFO:
50 Shut-off D P bar 11 109
51 Design pressure barg 13 110
52 Design temperature ºC 200 111
53 Min. / Max. ambient temperature ºC 16/45 112
54 PURCHASEDATA: 113 REMARKS:
55 Manufacturer * 114 * to be filled in by vendor
56 Model number * 115
57 Serial number * 116
58 Supplier * 117
59 Item quantity 2 118

00 6/22/2016 Issue For Tender N.D.T N.D.T N.H.N

C 6/6/2016 Issue For Approval N.D.T N.D.T N.H.N
B 5/24/2016 Issue For Review N.D.T N.D.T N.H.N
A 5/4/2016 Issue For Review N.D.T N.D.T N.H.N
Rev. Date Description/Issued for By Ckd Aproval
 Project no: 63T85041
Document no: 4395001
Revision: 00

DATA SHEET FOR CONTROL VALVE

Client : PUMA ENERGY VIETNAM LTD Project : BITUMEN STORAGE AND DISTRIBUTION TERMINAL PROJECT
Rev

Rev
Units Units
1 GENERAL: 60 GENERAL:
2 Tag number WCV-10403 61 Plant / Unit Process-Bitumen
3 Service Flow Control Valve 62 Location outdoor
4 Line No. 4"-P-104002-AC-HT-50 63 Flammable atmosphere zone 2
5 Piping Class/Code AC 64 Gas group IIA
6 P&ID number 3143104 65 Temp category T3
7 66
8 67
9 VALVE BODY DATA: 68 ACTUATOR DATA:
10 Valve type Globe Valve 69 Valve action on air failure Close
11 Process connection Flange ASME B16.5 70 Actuator type *
12 Flange Size / rating inch/lbs * / 150# 71 Actuator position Standard
13 Flange facing / finish µm RF 72 Actuator supply pressure range bar 7.0/ 4.0
14 Body material CS 73 Handwheel / orientation N/A / -
15 Flange material CS 74 Manufacturer / Model number * / *
16 Bellows / bellows material NA / NA 75
17 Bonnet type / material CS 76 POSITIONER DATA:
18 Packing box construction / material * 77 Manufacturer / Model number * / *
19 Bonnet gasket material SS 316 78 Input signal / HART 4 - 20 mA / no
20 Flow tending to 79 Positioner action / Load resistance Direct / < 300 W
21 TRIM DATA : 80 Explosion prot. cert. Eex'ia'
22 Trim type / Size Standard / * 81
23 Plug / disk material SS 316 82 LIMIT SWITCH DATA : NA
24 Seat material SS 316 83 Tag number open position
25 Seat gasket material * 84 Tag number close position
26 Stem material / diameter SS 316 / * 85 Manufacturer / Model number /
27 Characteristic of Trim * 86 Explosion prot. cert.
28 Leakage class IV 87
29 88 SOLENOID VALVE NA
30 89 Tag number /
31 PROCESS DATA: 90 Solenoid valve type
32 Medium / phase Bitumen / PMB Liquid 91 Power Supply
33 Operating conditions Min flow Norm flw Max flow 92 Vent action
34 Flow m3/h 30 60 60 93 Option
35 Pressure (upstream) barg 7.13 5.69 5.69 94 Manufacturer / Model number /
36 Pressure drop bar 6.32 4.69 4.69 95 Explosion prot. cert.
37 Temperature ºC 150 150 150 96 ACCESSORIES
38 Density kg/m3 953.5 953.5 953.5 97 Air filter regulator / Setting barg Yes / *
39 Viscosity cP 640 640 640 98
40 Cv/Cp Compressibility factor - - 99
41 Vapour pressure bar 0.01 100
42 Critical pressure bar - 101
43 Calculated Cv - 102 SPECIAL REQUIREMENTS:
44 Calculated noise dB(A) * * * 103 Material certificate EN10204-3.1
45 MW for gas Tsh (steam) ºC - - 104 Test requirements Vendor standard
46 Choked flow / Cavitation * 105 Fire safe design valve No
47 Flashing (%) Solids (%) NA NA 106 SIL (loop) / Architecture / Type / SFF NA
48 Solids (soft/abrasive) NA 107 ldd / ldu / lsd / lsu FIT NA
49 Max. Allowed sound level dB(A) 108 NON-VENDOR RELATED INFO:
50 Shut-off D P bar 11 109
51 Design pressure barg 13 110
52 Design temperature ºC 200 111
53 Min. / Max. ambient temperature ºC 16/45 112
54 PURCHASEDATA: 113 REMARKS:
55 Manufacturer * 114 * to be filled in by vendor
56 Model number * 115
57 Serial number * 116
58 Supplier * 117
59 Item quantity 1 118

00 6/22/2016 Issue For Tender N.D.T N.D.T N.H.N

C 6/6/2016 Issue For Approval N.D.T N.D.T N.H.N
B 5/24/2016 Issue For Review N.D.T N.D.T N.H.N
A 5/4/2016 Issue For Review N.D.T N.D.T N.H.N
Rev. Date Description/Issued for By Ckd Aproval
 Project no: 63T85041
Document no: 4395001
Revision: 00

DATA SHEET FOR CONTROL VALVE

Client : PUMA ENERGY VIETNAM LTD Project : BITUMEN STORAGE AND DISTRIBUTION TERMINAL PROJECT
Rev

Rev
Units Units
1 GENERAL: 60 GENERAL:
2 Tag number PCV-10201, PCV-10202 61 Plant / Unit Process-Bitumen
3 Service Bitumen circulation 62 Location outdoor
4 Line No. 4"-P-102005/102008-AC-HT-50 63 Flammable atmosphere zone 2
5 Piping Class/Code AC 64 Gas group IIA
6 P&ID number 3143102 65 Temp category T3
7 66
8 67
9 VALVE BODY DATA: 68 ACTUATOR DATA:
10 Valve type Globe Valve 69 Valve action on air failure Close
11 Process connection Flange ASME B16.5 70 Actuator type *
12 Flange Size / rating inch/lbs * / 150# 71 Actuator position Standard
13 Flange facing / finish µm RF / 125 AARH 72 Actuator supply pressure range bar 7.0/ 4.0
14 Body material CS 73 Handwheel / orientation N/A / -
15 Flange material CS 74 Manufacturer / Model number * / *
16 Bellows / bellows material NA / NA 75
17 Bonnet type / material CS 76 POSITIONER DATA:
18 Packing box construction / material * 77 Manufacturer / Model number * / *
19 Bonnet gasket material SS 316 78 Input signal / HART 4 - 20 mA / no
20 Flow tending to 79 Positioner action / Load resistance Direct / < 300 W
21 TRIM DATA : 80 Explosion prot. cert. Eex'ia'
22 Trim type / Size Standard / * 81
23 Plug / disk material SS 316 82 LIMIT SWITCH DATA : NA
24 Seat material SS 316 83 Tag number open position
25 Seat gasket material * 84 Tag number close position
26 Stem material / diameter SS 316 / * 85 Manufacturer / Model number /
27 Characteristic of Trim * 86 Explosion prot. cert.
28 Leakage class IV 87
29 88 SOLENOID VALVE NA
30 89 Tag number /
31 PROCESS DATA: 90 Solenoid valve type
32 Medium / phase Bitumen 91 Power Supply
33 Operating conditions Min flow Norm flw Max flow 92 Vent action
34 Flow m3/hr 30 60 60 93 Option
35 Pressure (upstream) barg 9.3 9.3 9.3 94 Manufacturer / Model number /
36 Pressure drop bar 5.38 3.15 3.15 95 Explosion prot. cert.
37 Temperature ºC 150 150 150 96 ACCESSORIES
38 Density kg/m3 953.5 953.5 953.5 97 Air filter regulator / Setting barg Yes / *
39 Viscosity cP 640 640 640 98
40 Cv/Cp Compressibility factor - - 99
41 Vapour pressure bar 0.01 100
42 Critical pressure bar - 101
43 Calculated Cv - 102 SPECIAL REQUIREMENTS:
44 Calculated noise dB(A) * * * 103 Material certificate EN10204-3.1
45 MW for gas Tsh (steam) ºC - - 104 Test requirements Vendor standard
46 Choked flow / Cavitation * 105 Fire safe design valve No
47 Flashing (%) Solids (%) NA NA 106 SIL (loop) / Architecture / Type / SFF NA
48 Solids (soft/abrasive) NA 107 ldd / ldu / lsd / lsu FIT NA
49 Max. Allowed sound level dB(A) 108 NON-VENDOR RELATED INFO:
50 Shut-off D P bar 11 109
51 Design pressure barg 13 110
52 Design temperature ºC 200 111
53 Min. / Max. ambient temperature ºC 16/45 112
54 PURCHASEDATA: 113 REMARKS:
55 Manufacturer * 114 * to be filled in by vendor
56 Model number * 115
57 Serial number * 116
58 Supplier * 117
59 Item quantity 2 118

00 6/22/2016 Issue For Tender N.D.T N.D.T N.H.N

C 6/6/2016 Issue For Approval N.D.T N.D.T N.H.N
B 5/24/2016 Issue For Review N.D.T N.D.T N.H.N
A 5/4/2016 Issue For Review N.D.T N.D.T N.H.N
Rev. Date Description/Issued for By Ckd Aproval
 Project no: 63T85041
Document no: 4395001
Revision: 00

DATA SHEET FOR CONTROL VALVE

Client : PUMA ENERGY VIETNAM LTD Project : BITUMEN STORAGE AND DISTRIBUTION TERMINAL PROJECT
Rev

Rev
Units Units
1 GENERAL: 60 GENERAL:
2 Tag number PCV-20101 61 Plant / Unit Utility - Hot Oil
3 Service Hot oil by pass line 62 Location outdoor
4 Line No. 6"-HO-201016-BC-HI-50 63 Flammable atmosphere None
5 Piping Class/Code BC 64 Gas group None
6 P&ID number 3143201 65 Temp category None
7 66
8 67
9 VALVE BODY DATA: 68 ACTUATOR DATA:
10 Valve type Globe Valve 69 Valve action on air failure Close
11 Process connection Flange ASME B16.5 70 Actuator type *
12 Flange Size / rating inch/lbs * / 300# 71 Actuator position Standard
13 Flange facing / finish µm RF / 125 AARH 72 Actuator supply pressure range bar 7.0/ 4.0
14 Body material CS 73 Handwheel / orientation N/A / -
15 Flange material CS 74 Manufacturer / Model number * / *
16 Bellows / bellows material NA / NA 75
17 Bonnet type / material CS 76 POSITIONER DATA:
18 Packing box construction / material * 77 Manufacturer / Model number * / *
19 Bonnet gasket material SS 316 78 Input signal / HART 4 - 20 mA / no
20 Flow tending to 79 Positioner action / Load resistance Direct / < 300 W
21 TRIM DATA : 80 Explosion prot. cert. Eex'ia'
22 Trim type / Size Standard / * 81
23 Plug / disk material SS 316 82 LIMIT SWITCH DATA : NA
24 Seat material SS 316 83 Tag number open position
25 Seat gasket material * 84 Tag number close position
26 Stem material / diameter SS 316 / * 85 Manufacturer / Model number /
27 Characteristic of Trim * 86 Explosion prot. cert.
28 Leakage class IV 87
29 88 SOLENOID VALVE NA
30 Cv required Cv selected * * 89 Tag number /
31 PROCESS DATA: 90 Solenoid valve type
32 Medium / phase Hot Oil / Liquid 91 Power Supply
33 Operating conditions Min flow Norm flw Max flow 92 Vent action
34 Flow m3/h 21 - 184.33 93 Option
35 Pressure (upstream) barg 5.3 - 3.28 94 Manufacturer / Model number /
36 Pressure drop bar 5.0 - 2.74 95 Explosion prot. cert.
37 Temperature ºC 260 - 260 96 ACCESSORIES
38 Density kg/m3 719 - 719 97 Air filter regulator / Setting barg Yes / *
39 Viscosity cP 0.75 - 0.75 98
40 Cv/Cp Compressibility factor - - 99
41 Vapour pressure bar 0.03 100
42 Critical pressure bar - 101
43 Calculated Cv - 102 SPECIAL REQUIREMENTS:
44 Calculated noise dB(A) * * * 103 Material certificate EN10204-3.1
45 MW for gas Tsh (steam) ºC - - 104 Test requirements Vendor standard
46 Choked flow / Cavitation * 105 Fire safe design valve No
47 Flashing (%) Solids (%) NA NA 106 SIL (loop) / Architecture / Type / SFF NA
48 Solids (soft/abrasive) NA 107 ldd / ldu / lsd / lsu FIT NA
49 Max. Allowed sound level dB(A) 108 NON-VENDOR RELATED INFO:
50 Shut-off D P bar 8 109
51 Design pressure barg 8 110
52 Design temperature ºC 300 111
53 Min. / Max. ambient temperature ºC 16 / 45 112
54 PURCHASEDATA: 113 REMARKS:
55 Manufacturer * 114 * to be filled in by vendor
56 Model number * 115
57 Serial number * 116
58 Supplier * 117
59 Item quantity 1 118

00 6/22/2016 Issue For Tender N.D.T N.D.T N.H.N

C 6/6/2016 Issue For Approval N.D.T N.D.T N.H.N
B 5/24/2016 Issue For Review N.D.T N.D.T N.H.N
A 5/4/2016 Issue For Review N.D.T N.D.T N.H.N
Rev. Date Description/Issued for By Ckd Aproval
 Project no: 63T85041
Document no: 4395001
Revision: 00

DATA SHEET FOR CONTROL VALVE

Client : PUMA ENERGY VIETNAM LTD Project : BITUMEN STORAGE AND DISTRIBUTION TERMINAL PROJECT
Rev

Rev
Units Units
1 GENERAL: 60 GENERAL:
2 Tag number PCV-40001
PVC-40001 61 Plant / Unit Utility - Compressed air
3 Service Pressure Regulator Valve 62 Location Utility
4 Line No. 1"-CA-400001-AG2-NI 63 Flammable atmosphere none
5 Piping Class/Code AG 64 Gas group none
6 P&ID number 3143400 65 Temp category none
7 66
8 VALVE BODY DATA: 67
9 Valve type Pressure regulator 68 ACTUATOR DATA:
10 Process connection Flange ASME B16.5 69 Actuator type Spring type
11 Size inch * 70 Actuator position *
12 Body / bonnet material CS galvanized 71 Box/spring case orientation *
13 Spring chamber material * 72 Self cont. or ext. conn. self controlling
14 Packing construction * 73 Diaphragm material *
15 Pressure range Out put barg 0 - (8) 74 Spring range barg 0 - (8)
16 Max Supply Pressure barg 8.0 75 Set point pressure barg 7.0
17 Exhaust Capacity * 76 Type of set point At downstream
18 Flow tending to * 77
19 Exhaust Capacity * 78
20 Gasket SS316 79
21 TRIM DATA : 80
22 Trim type / Size Standard / * 81
23 Plug / disk material SS316 82 ACCESSORIES
24 Seat material SS316 83 Air filter regulator / Setting -/bar NA / NA
25 Seat gasket material * 84 Pilot Supply to pilot NA NA
26 Stem material / diameter SS316 / * 85 Housing vent *
27 Characteristic of Trim * 86 Internal relief *
28 Leakage class IV 87 pressure gauge yes
29 88 Filter No
30 89 Lubricator No
31 PROCESS DATA: 90
32 Medium / phase Instrument air / Gas 91
33 Operating conditions Min flow Norm flw Max flow 92
34 Flow Nm3/hr - 92 - 93
35 Pressure (upstream) barg - 8 - 94
36 Pressure drop bar - 1 - 95
37 Temperature ºC - AMB - 96
38 Density kg/m3 - 1.165 - 97
39 Viscosity cP - 0.019 - 98
40 Cv/Cp Compressibility factor - - 99
41 Vapour pressure bar 100
42 Critical pressure bar 37.74 101
43 Calculated Cv - 102 SPECIAL REQUIREMENTS:
44 Calculated noise dB(A) * * * 103 Material certificate EN10204-3.1
45 MW for gas Tsh (steam) ºC - - 104 Test requirements Vendor standard
46 Choked flow / Cavitation * 105 Fire safe design valve No
47 Flashing (%) Solids (%) NA NA 106 SIL (loop) / Architecture / Type / SFF NA
48 Solids (soft/abrasive) NA 107 ldd / ldu / lsd / lsu FIT NA
49 Max. Allowed sound level dB(A) 108 NON-VENDOR RELATED INFO:
50 Shut-off D P bar 10 109
51 Design pressure barg 10 110
52 Design temperature ºC 65 111
53 Min. / Max. ambient temperature ºC 16/45 112
54 PURCHASEDATA: 113 REMARKS:
55 Manufacturer * 114 * to be filled in by vendor
56 Model number * 115
57 Serial number * 116
58 Supplier * 117
59 Item quantity 1 118

00 6/22/2016 Issue For Tender N.D.T N.D.T N.H.N

C 6/6/2016 Issue For Approval N.D.T N.D.T N.H.N
B 5/24/2016 Issue For Review N.D.T N.D.T N.H.N
A 5/4/2016 Issue For Review N.D.T N.D.T N.H.N
Rev. Date Description/Issued for By Ckd Aproval
 Project no: 63T85041
Document no: 4395001
Revision: 00

DATA SHEET FOR CONTROL VALVE

Client : PUMA ENERGY VIETNAM LTD Project : BITUMEN STORAGE AND DISTRIBUTION TERMINAL PROJECT
Rev

Rev
Units Units
1 GENERAL: 60 GENERAL:
2 Tag number PCV-40002
PVC-40002 61 Plant / Unit Utility - Compressed air
3 Service Pressure Regulator Valve 62 Location Utility
4 Line No. 2"-PA-400002-AG2-NI 63 Flammable atmosphere none
5 Piping Class/Code AG2 64 Gas group none
6 P&ID number 3143400 65 Temp category none
7 66
8 VALVE BODY DATA: 67
9 Valve type Pressure regulator 68 ACTUATOR DATA:
10 Process connection Flange ASME B16.5 69 Actuator type Spring stype
11 Size inch * 70 Actuator position *
12 Body / bonnet material CS galvanized 71 Box/spring case orientation *
13 Spring chamber material * 72 Self cont. or ext. conn. self controlling
14 Packing construction * 73 Diaphragm material *
15 Pressure range Out put barg 0 - (8) 74 Spring range barg 0 - (8)
16 Max Supply Pressure barg 8.0 75 Set point pressure barg 4.0
17 Exhaust Capacity * 76 Type of set point At downstream
18 Flow tending to * 77
19 Exhaust Capacity * 78
20 Gasket SS316 79
21 TRIM DATA : 80
22 Trim type / Size Standard / * 81
23 Plug / disk material SS316 82 ACCESSORIES
24 Seat material SS316 83 Air filter regulator / Setting -/bar NA / NA
25 Seat gasket material * 84 Pilot Supply to pilot NA NA
26 Stem material / diameter SS316 / * 85 Housing vent *
27 Characteristic of Trim * 86 Internal relief *
28 Leakage class IV 87 pressure gauge yes
29 88 Filter No
30 89 Lubricator No
31 PROCESS DATA: 90
32 Medium / phase Plant air / gas 91
33 Operating conditions Min flow Norm flw Max flow 92
34 Flow Nm3/hr - 92 - 93
35 Pressure (upstream) barg - 8 - 94
36 Pressure drop bar - 4 - 95
37 Temperature ºC - AMB - 96
38 Density kg/m3 - 1.165 - 97
39 Viscosity cP - 0.019 - 98
40 Cv/Cp Compressibility factor - - 99
41 Vapour pressure bar 100
42 Critical pressure bar 37.74 101
43 Calculated Cv - 102 SPECIAL REQUIREMENTS:
44 Calculated noise dB(A) * * * 103 Material certificate EN10204-3.1
45 MW for gas Tsh (steam) ºC - - 104 Test requirements Vendor standard
46 Choked flow / Cavitation * 105 Fire safe design valve No
47 Flashing (%) Solids (%) NA NA 106 SIL (loop) / Architecture / Type / SFF NA
48 Solids (soft/abrasive) NA 107 ldd / ldu / lsd / lsu FIT NA
49 Max. Allowed sound level dB(A) 108 NON-VENDOR RELATED INFO:
50 Shut-off D P bar 10 109
51 Design pressure barg 10 110
52 Design temperature ºC 65 111
53 Min. / Max. ambient temperature ºC 16/45 112
54 PURCHASEDATA: 113 REMARKS:
55 Manufacturer * 114 * to be filled in by vendor
56 Model number * 115
57 Serial number * 116
58 Supplier * 117
59 Item quantity 1 118

00 6/22/2016 Issue For Tender N.D.T N.D.T N.H.N

C 6/6/2016 Issue For Approval N.D.T N.D.T N.H.N
B 5/24/2016 Issue For Review N.D.T N.D.T N.H.N
A 5/4/2016 Issue For Review N.D.T N.D.T N.H.N
Rev. Date Description/Issued for By Ckd Aproval