Scribd
Upload
357 views4 pages

Microstart GSM Mobile Starter Voltage 180v To 500 V Motor Control

1. The document describes a GSM-based motor controller that can start and stop three-phase pumps remotely up to 25HP via SMS or voice call using an interactive voice response system. 2. It has full protection against electrical faults and allows monitoring of motor status, voltages, and currents remotely. Parameters like voltage and current thresholds can be configured via SMS. 3. The controller supports motor control and monitoring via SMS commands or a voice call menu with password protection. It indicates operating faults and conditions using LEDs and can send SMS alerts for issues.

Uploaded by

Vighnesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
357 views4 pages

Microstart GSM Mobile Starter Voltage 180v To 500 V Motor Control

1. The document describes a GSM-based motor controller that can start and stop three-phase pumps remotely up to 25HP via SMS or voice call using an interactive voice response system. 2. It has full protection against electrical faults and allows monitoring of motor status, voltages, and currents remotely. Parameters like voltage and current thresholds can be configured via SMS. 3. The controller supports motor control and monitoring via SMS commands or a voice call menu with password protection. It indicates operating faults and conditions using LEDs and can send SMS alerts for issues.

Uploaded by

Vighnesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

GSM BASED MOTOR CONTROLLER

MOTOR CONTROLLER FOR EXTERNAL STARTER (SEMI / DOL)


GSM BASED MOTOR CONTROLLER
Salient Features:
1. Fully programmable
2. Suitable for three phase pumps up to 25HP.
3. Relay outputs for Star-Delta starters.
4. Wide operating range from 160V-500V phase to phase.
5. Can be operated in 3 modes such as GSM/AUTO/MANUAL.
6. GSM based SMS controlled start/stop and remote monitoring.
7. GSM based Interactive Voice Response System (IVRS) controlled start/stop and
remote monitoring for 3 registered numbers.
8. IVRS – Voice response available in regional language.
9. Live Motor operation Status available via SMS as Motor ON/OFF status, Live Fault,
Phase Voltages and current.
10. Auto reply in case of faults to registered mobile number.
11. Password Protected for all commands and IVRS.
12. Complete protection from electrical unhealthy condition.
13. All parameters are Password Protected.
14. All parameters are settable through SMS.
15. LED indications for Faults.
16. User Programmable Timer For Motor ON/OFF
17. Free Full Version Android Application available for Mobile Control.

The Controller Unit continuously scans all kind of electrical faults like
Under Voltage, Over Voltage, SPP, Reverse Phase, Voltage
Unbalance, Dry Run, and Over Load.

Parameters Adjustable Range is as Below:


1. Under Voltage Protection 50 – 380volts
2. Over Voltage Protection 420 – 600volts
3. Voltage Unbalance Protection 10 – 150volts
4. Dry Run Protection 50 – 90%
5. Overload Protection 110 – 300%
6. Star to Delta Timer 03 – 45sec
7. Auto Switch Timer 10 – 300sec
8. Dry/Overload Reset Timer 01 – 09hrs

Parameters which can be Enabled / Disabled:


1. Password Protection (both for SMS and Calling)
2. SMS Feedback
3. Power On Call Facility
4. Motor History
5. Dry Run Protection
6. Overload Protection
7. Voltage Unbalance Protection
8. Auto / Manual Mode
9. OFF Timer
GSM BASED MOTOR CONTROLLER
LED Indications:
1. Supply Healthy (Green) (No fault)
2. SPP/UB/RP (RED): SPP, Voltage Unbalance& Reverse Phase Fault.
3. OL (RED): Dry Run Fault
4. DRY RUN (RED):.Overload
5. SET CURRENT(RED): Set Motor Current
6. SMS/CALL(RED): Communication Indication
7. NETWORK(RED): Network Indication

Motor Control through CALL (IVRS):

The MICROSTART GSM CONTROLLER has inbuilt Interactive Voice Response


System (IVRS) controlled start/stop and remote monitoring. User can control the motor by
voice call to the controller only by entering the password. While the call is on the motor starts
if users presses 1 on his mobile, likewise stops if 3 is pressed, SMS of present state is
received if 3 is pressed and a present status/condition of the motor can be heard if 9 is
pressed. Also the user can change the password by pressing 7 and entering new password
when asked from the unit.

Press 1 -->MOTOR ON For Switch ON the Site Motor


Press 3 -->MOTOR OFF For Switch OFF the Site Motor
Press 4 -->SET CURRENT For Storing the Motor Current
Press 5 -->AUTO MODE For Auto Mode Selection
Press 6 -->RESET FAULT For Clear the Faults Occurred
Press 7 -->CHANGE PASSWORD For changing exiting password
Press 8 -->MANUAL MODE For Manual Mode Selection
Press 9 -->STATUS For Current Status of Motor

Android Application in Regional Language:


GSM BASED MOTOR CONTROLLER

You might also like