Scribd
Upload
98 views2 pages

D4516503033 Pib 001

This product information bulletin provides corrections to dimensional errors listed in user manuals for NXT Ram BOP models. The previous manuals listed incorrect maximum dimensions for cavity sizes. An updated chart is now provided with the correct maximum dimension of 7.270 inches. Customers are advised to check previous bulletins and manuals for any additional safety information regarding the operation and maintenance of these products.

Uploaded by

Edmo Virgens
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
98 views2 pages

D4516503033 Pib 001

This product information bulletin provides corrections to dimensional errors listed in user manuals for NXT Ram BOP models. The previous manuals listed incorrect maximum dimensions for cavity sizes. An updated chart is now provided with the correct maximum dimension of 7.270 inches. Customers are advised to check previous bulletins and manuals for any additional safety information regarding the operation and maintenance of these products.

Uploaded by

Edmo Virgens
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Product Information Bulletin

Date: 02 June 2017


Bulletin Number: D4516503033-PIB-001 Revision: Rev 02
NXT Ram BOP

Subject: Correction of NXT cavity dimension errors listed in User Manual.

Product Model: NXT Ram BOP

Effectivity: All NXT BOP models

Affected Assemblies: All issued NXT User Manuals that do not reflect the below correct
dimensions.

Objective
Provide corrected chart for manual maintenance section.

Issue
Previous issued manuals had typographical errors and incorrect dimension conversions.

Solution
Corrected chart (see highlighted area for changes):

1
Product Information Bulletin

Ordering and Contact Information


Please contact your local National Oilwell Varco (NOV) Service Center, with reference to Product Bulletin
D4516503033-PIB-001, for further assistance.

Economic Impact
No economic Impact.

Customers should also refer to previous NOV Product Bulletins for additional information related to this
issue and information regarding safe operation, maintenance, and inspection criteria by signing in to your
MYNOV account at https://portal.mynov.com and then searching with the Product Bulletin Search
available below the heading ‘Application Groups’. For information on registering, please visit
https://www.nov.com/Search/register.aspx.

Failure to follow the recommendations and/or guidance in NOV Manuals and Product Bulletins may
result in death, bodily injury or property damage.

Please contact your local National Oilwell Varco (NOV) Service Center if you have any questions regarding
this bulletin.

Revision History
Revision Date Change Description
(00 Month 0000) (vertical line to the side of a paragraph indicates a change)
01 05 August 2015 First Issue

02 02 June 2017 Changed BOP Cavity Nominal Limits Max dimension from 7.260” to
7.270”, and updated to new PIB format.

D4516503033-PIB-001 / Rev 02 2

You might also like