Scribd
Upload
36 views

Service Bulletin: Improving The Adhesive Material of The Pad Front SEP

This service bulletin addresses an issue with the adhesive material of the pad front SEP disengaging from the paper feed guide in certain printer models. The material of the double faced tape surface of the pad front SEP has been changed from 5000NS to TW-Y01 type to improve adhesive strength. Technicians are instructed to replace the pad front SEP with the updated part if the issue occurs. The bulletin provides details on affected models, the problem, solution, replacement parts, and production dates of affected units.

Uploaded by

Andrey Khodanitski
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
36 views

Service Bulletin: Improving The Adhesive Material of The Pad Front SEP

This service bulletin addresses an issue with the adhesive material of the pad front SEP disengaging from the paper feed guide in certain printer models. The material of the double faced tape surface of the pad front SEP has been changed from 5000NS to TW-Y01 type to improve adhesive strength. Technicians are instructed to replace the pad front SEP with the updated part if the issue occurs. The bulletin provides details on affected models, the problem, solution, replacement parts, and production dates of affected units.

Uploaded by

Andrey Khodanitski
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Service Bulletin

SB Number: SB 2H9-006 Creation Date: 15/09/2010


Subject: Improving the adhesive material of the pad front SEP
FS-1028MFP/DP, FS-1028MFP/3040MFP/3140MFP,
Model:
FS-C2026MFP/2126MFP, DP-110

Affected models: DP-110 FS-1028MFP/DP, FS-1028MFP/1128MFP/3040MFP/3140MFP,


FS-C2026MFP/2126MFP

Phenomenon The pad front SEP may disengage from the paper feed guide (upper guide B).
Cause When removing the original to clear a paper jam at the DP, the pad front SEP may peel off.
Solution To improve the adhesive strength, the material of the double faced tape surface of the
pad front SEP has been changed from 5000NS to TW-Y01 type.

Pad front SEP

Parts
No. Old Parts New Parts Description Q’TY Interchange- SP
No. No. ability
Old New Old New
1 303K507101 303K507102 PAD FRONT SEP 1 1 O O O
3K507101 3K507102

Classification Entire stock rework In-field modification at next visit X No modification necessary
In-field modification by case
Field measure When the above mentioned phenomenon occurs, please replace the pad front SEP with the latest
type.

KMIS Service Department, Kyocera Mita Europe


Page  of 2 A274 / SB 2H9-006
Service Bulletin

Serial numbers of affected machines Serial numbers of affected units


Type Serial number Type Serial number
FS-1028MFP/DP, August 2010 production. DP-110 August 2010 production.
FS-1028MFP/3040MFP/
3140MFP, FS-C2026MFP/
2126MFP
Machines produced after the above mentioned production Units produced after the above mentioned production
date, should not have the above mentioned date, should not have the above mentioned
phenomenon. phenomenon.

KMIS Service Department, Kyocera Mita Europe


Page  of 2 A274 / SB 2H9-006

You might also like