Scribd
Upload
314 views5 pages

Industrial Production of ALCOHOL

Microbial production of ethanol through fermentation is commonly used for industrial alcohol production. Ethanol can be produced from starches or sugars derived from plants like corn, sugar cane, or molasses using yeasts or bacteria. The commercial production process involves preparing a medium, conducting continuous fermentation using organisms like Saccharomyces cerevisiae, and recovering up to 95% ethanol through distillation.

Uploaded by

aarashya Kashyap
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
314 views5 pages

Industrial Production of ALCOHOL

Microbial production of ethanol through fermentation is commonly used for industrial alcohol production. Ethanol can be produced from starches or sugars derived from plants like corn, sugar cane, or molasses using yeasts or bacteria. The commercial production process involves preparing a medium, conducting continuous fermentation using organisms like Saccharomyces cerevisiae, and recovering up to 95% ethanol through distillation.

Uploaded by

aarashya Kashyap
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

INDUSTRIAL PRODUCTION OF ALCOHOL

Microbial production of one of the organic feed stocks from plant


substances such as molasses is presently used for ethanol production.
This alcohol was produced by fermentation in the early days but for
many years by chemical means through the catalytic hydration of
ethylene.

In modem era, attention has been paid to the production of ethanol for
chemical and fuel purposes by microbial fermentation. Ethanol is now-
a-days produced by using sugar beet, potatoes, com, cassava, and sugar
cane (Fig. 20.6).

Both yeasts (Saccharomyces cerevisiae, S. uvarum S. carlsbergensis,


Candida brassicae, C. utilis, Kluyveromyces fragilis, K. lactis) and
bacteria (Zymomonas mobilis) have been employed for ethanol
production in industries.

The commercial production is carried out with Saccharomyces


cerevisiae. On the other hand, uvarum has also largely been used. The
Candida utilis is used for the fermentation of waste sulphite liquor since
it also ferments pentoses.

Recently, experimentation with Schizosaccharomyces has shown


promising results. When whey from milk is used, strain of K. fragilis is
recommended for the production of ethanol. It is also found that
Fusarium, Bacillus and Pachysolen tannophilus (yeast) can transform
pentose sugars to ethanol.

Theoretically, it is interesting to note that fermentation process retains


most of the energy of the sugar in the form of ethanol. The heat of
combustion of solid sucrose is 5.647 MJ mol-1, the heat of combustion
of glucose is 2.816 MJ mol-1 but the heat release is 1.371 MJ mol-1.
ADVERTISEMENTS:

The equations are given below:

Thus the above reactions show that 97% sugar transforms into ethanol.
But in practice, the fermentation yield of ethanol from sugar is about
46% or one hundred grams of pure glucose will yield 48.4 grams of
ethanol, 46.6 g of CO2, 3.3 grams of glycerol and 1.2 g of yeast. The
biosynthesis of ethanol is given in Fig. 20.6.
It is noteworthy that the ethanol at high concentration inhibits the
yeast. Hence, the concentration of ethanol reduces the yeast growth
rate which affect the biosynthesis of ethanol.

It can produce about 10-12 % ethanol but the demerit of yeast is that it
has limitation of converting whole biomass derived by their ability to
convert xylulose into ethanol. The Zymomonas has a merit over yeast
that it has osmotic tolerance to higher sugar concentration. It is
relatively having high tolerance to ethanol and have more specific
growth rate.

1. Preparation of Medium:
Three types of substrates are used for ethanol production:
(a) Starch containing substrate,

(b) Juice from sugarcane or molasses or sugar beet,

ADVERTISEMENTS:

(c) Waste products from wood or processed wood. Production of


ethanol from whey is not viable.

If yeast strains are to be used, the starch must be hydrolysed as yeast


does not contain amylases. After hydrolysis, it is supplemented with
celluloses of microbial origin so as to obtain reducing sugars. About 1
ton of starch required 1 litre of amylases and 3.5 litre of glucoamylases.
Following steps are involved in conversion of starch into ethanol (Fig.
20.7).
On the other hand, if molasses are used for ethanol production, the
bagasse can also give ethanol after fermentation. Several other non-
conventional sources of energy such as aquatic plant biomass, wood
after hydrolysis with celluloses gives ethanol. Sulphite waste-liquor, a
waste left after production of paper, also contains hexose as well as
pentose sugar. The former can be microbially easily converted.

2. Fermentation:
Ethanol is produced by continuous fermentation. Hence, large
fermenters are used for continuous manufacturing of ethanol. The
process varies from one country to another. India, Brazil, Germany,
Denmark have their own technology for ethanol production.

The fermentation conditions are almost similar (pH 5, temperature


35°C) but the cultures and culture conditions are different. The
fermentation is normally carried out for several days but within 12h
starts production. After the fermentation is over, the cells are
separated to get biomass of yeast cells which are used as single cell
protein (SCP) for animal’s feed.

The culture medium or supernatant is processed for recovery of


ethanol (Fig. 20.6). Ethanol is also produced by batch fermentation as
no significant difference is found both in batch and continuous
fermentation.

Although as stated earlier within 12h Saccharomyces cerevisiae starts


producing ethanol at the rate of 10% (v/v) with 10-20g cells dry
weight/lit. The reduction in fermentation time is accomplished use of
ceil recycling continuously in fermentation.

3. Recovery:
Ethanol can be recovered upto 95 percent by successive distillations. To
obtain 100 percent, it requires to form an azeotropic mixture
containing 5 percent water. Thus 5 percent water is removed from
azeotropic mixture of ethanol, water and benzene after distillation. In
this procedure, benzene water ethanol and then ethanol-benzene
azeotropic mixture are removed so that absolute alcohol is obtained.

You might also like