KFL‐DC 

Series Electromagnetic Flowmeter 
 
Integral Type:   
 
 
 
 
 
 
 
 
 
Remote Type:     
KFL® KFL-DC Series Electromagnetic Flowmeter

Specifications

 Nominal Meter Size  Fluid Temperature

10 to 1000mm (3/8 to 40 inch) -25 to 60℃ (-13 to 140℉)
 Liquid Pressure ( MPa ) -25 to 180℃(-13 to 356℉)(opt.)
1.0, 1.6, 2.5, 4.0, 16, 25  Liner
 Accuracy CR, FEP, PTFE, PFA
±0.5%  Relative Humidity
 Minimum Conductivity ≤85%
＞5μs/cm  Ambient Temperature
 Electrode Material -10 to 60℃ (14 to 140℉)
SS316L (standard), Hastelloy, Tantalun,  Current Output
titanium, Tungsten Carbide (upon req.) 0 to 10mA or 4 to 20mA
 Frequency Output  Communications (opt.)
0 to 5000Hz with photoelectric isolation RS-232 without galvanic isolation
 Pulse Output RS-485 with galvanic isolation,
Adjustable from 0.001 to 1000 Ltr/Pulse MODBUS.
 Alarm Output (opt.)  Supply Power
Upper A larm-ALMH, Lower Alarm-ALML 85 to 250VAC (45 to 63Hz) or
with photoelectric isolation 20 to 36VDC
Upper A larm-ALMH, Lower Alarm-ALML  Power
with photoelectric isolation S＜10W/AC, S＜7.5W/DC

 Analog Output Effects

Same as pulse output plus ±0.1% of rate ±0.01mA

Fig. 2: Analog Output Effects

-2-
KFL® KFL-DC Series Electromagnetic Flowmeter
Flow Ranges and Meter Sizes
Min. Flow Range Max. Flow Range
Meter Size
Flow Velocity Flow Velocity

DN 0 to 0.5 m/s 0 to 1.64 ft/s 0 to 10 m/s 0 to 32.81 ft/s

mm Inch l/min, m3/h gpm l/min, m3/h gpm

10 3/8 0 to 2 l/min 0 to 0.52 0 to 40 l/min 0 to 11.88

15 1/2 0 to 5 l/min 0 to 1.32 0 to 100 l/min 0 to 26.41

20 3/4 0 to 7.5 l/min 0 to 1.98 0 to 150 l/min 0 to 39.62

25 1 0 to 10 l/min 0 to 2.64 0 to 200 l/min 0 to 52.83

32 1 1/4 0 to 20 l/min 0 to 5.28 0 to 400 l/min 0 to 105.66

40 1 1/2 0 to 30 l/min 0 to 7.92 0 to 600 l/min 0 to 158.50

50 2 0 to 3 m3/h 0 to 13 0 to 60 m 3/h 0 to 264

3 3
65 2 1/2 0 to 6 m /h 0 to 26 0 to 120 m /h 0 to 528
3 3
80 3 0 to 9 m /h 0 to 39 0 to 180 m /h 0 to 792

100 4 0 to 12 m 3/h 0 to 52 0 to 240 m3/h 0 to 1056

3 3
125 5 0 to 21 m /h 0 to 92 0 to 420 m /h 0 to 1849
3 3
150 6 0 to 30 m /h 0 to 132 0 to 600 m /h 0 to 2641

200 8 0 to 54 m 3/h 0 to 237 0 to 1080 m3/h 0 to 4755

3 3
250 10 0 to 90 m /h 0 to 396 0 to 1800 m /h 0 to 7925
3 3
300 12 0 to 120 m /h 0 to 528 0 to 2400 m /h 0 to 10566

350 14 0 to 165 m3/h 0 to 726 0 to 3300 m3/h 0 to 14529

400 16 0 to 225 m3/h 0 to 990 0 to 4500 m3/h 0 to 19812

450 18 0 to 300 m3/h 0 to 1320 0 to 6000 m3/h 0 to 26417

500 20 0 to 330 m 3/h 0 to 1452 0 to 6600 m3/h 0 to 29058

3 3
600 24 0 to 480 m /h 0 to 2113 0 to 9600 m /h 0 to 42267
3 3
700 28 0 to 660 m /h 0 to 2905 0 to 13200 m /h 0 to 59117

800 32 0 to 900 m3/h 0 to 3962 0 to 18000 m3/h 0 to 79251

3 3
900 36 0 to 1200 m /h 0 to 5283 0 to 24000 m /h 0 to 105668
3 3
1000 40 0 to 1350 m /h 0 to 5943 0 to 27000 m /h 0 to 118877

Table.1: Flow Ranges and Meter Size

-3-
KFL® KFL-DC Series Electromagnetic Flowmeter
Flowrate Nomograph

Fig. 3: Flowrate Nomograph DN1 to DN 100 (3/8” to 4”) Fig. 4: Flowrate Nomograph DN 125 to 1000 (5” to 40”)
Flowrate Nomographs Example:
The v olume f lowrate i s a f unction of t he flow v elocity and Flowrate = 7 m³/h [30.82 gpm] (Maximum value = range
the flowme-ter size. The Flowrate Nomographs, Fig. 3: and end v alue). S uitable ar e flowmeter s izes D N 20 t o D N
Fig. 4: i ndicate t he flowrate r ange f or a specific flowmeter 65 [3/4” to 2-/12”] for a flow velocity between 0.5 and 10
size and w hich f lowmeter s izes a re s uitable for a specific m/s [1.64 and 32.81 ft/s].
flowrate.

-4-
 KFL® KFL-DC Series Electromagnetic Flowmeter
Model and Sufix Code
Suffix Code Description
KFL-DC - - - - - Model format
DN -XXX Nominal size DN2-2200 mm
L 316L
V Titanium
Electrodes T Tantalum
material H Hastelloy
M Monel
P Platinum-Iridium
C Chloroprene Rubber (DN65-2200mm)
F FEP (DN10-500mm)
Lining material
T PTFE (DN50-300mm)
9 Customization
F Carbon steel flange
S 304 Stainless steel Flange
Process connection T Thread connection (DN10-100)
W Wafer connection (DN10-DN200)
C Tri-clamp connection (DN10-100)
-G1.6 DIN PN. 0.6, 1.0, 1.6, 2.0, 2.5, 4.0, 16, 25, 35, 42MPa
Working pressure -A150 ANSI CL150, CL300, CL600, CL900, CL1500, CL2500
-J10 JIS 10K, 20K, 30K
C Carbon steel
A Cast-aluminum (DN10-300)
Flow sensor housing material
S 304 Stainless steel with painting (DN10-350)
P 304 Stainless steel without painting (DN10-300mm)
L <60℃ （Short time can up to 80℃）
T <120℃（Integral type with cooling fin）
Liquid temperature S <120℃（remote type）
E <180℃（Integral type with cooling fin）
H <180℃（Only remote type）
A IP65
Flow sensor protection Class B IP68（Only remote type or Magnetic water meter type）
C IP67（Now unavailable）
-M Integral type
Construction
-D Remote type
A 100VAC-240VAC
Power supply B 20-36VDC
C Lithium battery (Pulse output only for calibration)
L Standard type (MT100, MT101)
X Explosion type (MT120)
N Process control type（MT130）
B Batch control type (MT140)
Transmitter type
E Battery supply type (MT150,MT151)
H Magnetic water meter type (MT152, battery supply, IP68)
S Slurry type (MT160, MT161)
9 Special type
Output signal 1 -C C：4-20mA output；D：0-10mA output；N: No current output
P：Pulse output；F：Frequency output；J: Battery supply pulse output;
Output signal 2 P
N: No pulse output
N: No communication; S: RS485 (MODBUS); R: RS232 (MODBUS)
Communication N B: RS485 (MODBUS)-Battery supply type;
F: PROFIBUS; H: HART; G: GPRS; A: CDMA
0: No cable (Integral type)
Cables length -0 1: 5m of signal and exciting current cable (Remote type default)
2: 10m; 3: 15m; 4: 20m; 5: 25m; 6: 50m; 7: 80m; 8: 100m

-5-