Scribd
Upload
232 views2 pages

PTS2016 06 00 PDF

This 3 sentence summary provides the key details about the product specification document: The document is a product specification for a Microcontroller-based Temperature Scanner with model PTS-2016 that can accept up to 16 RTD sensor inputs and provide up to 8 relay outputs, with features including temperature scanning and display, alarm and trip setpoints for each channel, and RS485 communication. The specification outlines the technical details of the temperature ranges, accuracy, display, scanning functions, output relays, power requirements, and dimensions for the temperature scanner. The manufacturer is listed as PROCON Instrumentation Private Limited in India.

Uploaded by

pradip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
232 views2 pages

PTS2016 06 00 PDF

This 3 sentence summary provides the key details about the product specification document: The document is a product specification for a Microcontroller-based Temperature Scanner with model PTS-2016 that can accept up to 16 RTD sensor inputs and provide up to 8 relay outputs, with features including temperature scanning and display, alarm and trip setpoints for each channel, and RS485 communication. The specification outlines the technical details of the temperature ranges, accuracy, display, scanning functions, output relays, power requirements, and dimensions for the temperature scanner. The manufacturer is listed as PROCON Instrumentation Private Limited in India.

Uploaded by

pradip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PRODUCT SPECIFICATION

CAT NO. PTS- 2016- 06- 00


REV : 0 DATE : 04-06-2000

Page 1

Ø Micro Controller based Temperature Scanner

Ø Front Panel Key Push button for

Programming

Ø Scanning by solid state switching

Ø Two set points for each input

Ø Software linearised

Ø High reliability

Ø End user Economy

PROCON combines technical excellence with customer dedication to evolve a user friendly Micro controller
based Temperature Scanner to meet the most stringent quality requirement, the industry demands today.

This Temperature Scanner instills a great degree of confidence through its operating capability and versatility
of execution. This scanner can accept RTD inputs upto a maximum of 16 Nos. Requirement of upto 8 Relay
contact outputs can be met. These relays can be configured from the panel key push button.

• Communication to scanner by RS485.


• Upto 16 inputs of 2 or 3 wire RTDs.
• LED indication for Alarm and Trip for each input. Under Alarm condition the LED will flash and for Trip
condition it will glow steadily.
• 12mm height, 7 segment LEDs for channel number and temperature indications.
• All cards are on FR-4/G-10 Laminates.
• Suitable for upto 50 degree C ambient temperature and 95% RH.
• Flush panel mounting.
• Display Dwell time can be programmed from 1sec. To 25secs.
• Latched relays for Trip conditions.
• Sensor ‘open’ and ‘short’ indications through 7 segment LEDs.
• Non Volatile memory for set points storage.
PROCON
PTS-2016-06-00
PAGE 2. REV : 0
TECHNICAL SPECIFICATION DATE : 04-06-2000

Model : PTS-2016
Input : 2/3 wire RTDs as per DIN 43760
No. of Channels : 16 Channels (maximum)
Range : 0-200 deg. C
Accuracy : +/- 1 Degree
Display : 7 segment LED (12mm) Display
3 digits for Temperature and 2 digits for channel no.
Display Dwell Time : 1 second to 25 seconds
Scan Rate : 8 Channels per second
Display Modes : Auto – Temperature of all channels cyclically.
Manual – Temperature of selected channel
SP1 – Alarm Setpoint of selected channel
SP2 – Trip Setpoint of selected channel
Alarm Display : One LED per channel.
Flashing under Alarm and steady on under Trip
Sensor status Display : On digit display. OP-open. SH-short
Switches : Four switches. Reset, Mode, Next, Previous
Output relays : 8 Nos. maximum
Contact configuration : 1 ‘NO’ or 1 ‘NC’ contact
Can be jumper selected in the Relay Card.
Contact Rating : 5 Amps at 220V AC resistive
Set Point Hysterisis : 3 Degrees
Set Point Programming : Through front panel switches
Set Point memory : Non Volatile. No battery back up required
Sensor linearisation : Provided through software
Power Supply : 90-270 V AC/DC
Common Mode Voltage : 110V Maximum
Termination : Screw type suitable for 1.5sq mm cable at the rear of the Instrument
Dimensions in mm : Bezel : 144(H) x 144(W)
Depth : 156
Cutout : 138(H) x 138(W)
Mounting : Flush panel. Mounting brackets provided
Ambient Temperature : 0 To 50 degrees Centigrade
Relay grouping : Programmable by the user

TERMINAL DETAILS

Manufactured by : PROCON INSTRUMENTATION PRIVATE LIMITED


Factory Head Office Branch Office
No.249, G.S.T Road, 1H, Shakthi Towers, S-91, Okhla Industrial Area,
URAPAKKAM, 766, Anna Salai, Chennai, Phase II,
Kanchipuram Dist., TamilNadu – 600 002 New Delhi – 110 020.
TamilNadu – 603 202.
Tel / Fax : 044 – 27465339, 27465453. Tel / Fax : 044 – 28524942,28522348, Telephone : 011 – 4102 3530, 2638 5601
28522041.
E-mail : [email protected] E-mail : [email protected] E-mail : [email protected]

Continuous development may necessitate change in design / specification without notice.

You might also like