PRIME CAP (BD) LTD.

One Prime. Best Prime. Quality Prime.

HaziRafizUddin Tower, Unique Bus Stand, Ashulia, Dhaka-1349.

Fabrics Testing (SOP)

Testing of Fabric
Fabric is a material or a sheet of yarn made through the interlacement or interloping process. The fabric which is
produced by following the interlacement of two sets of yarn is known as woven fabric and which is produced by
following interloping of one set yarn is known as knit fabric.

What is Fabric Test?

Fabric is the main element of garments. There are many quality parameters of fabrics must be tested to ensure
fabrics quality to meet the customer requirement. Fabrics become a cloth when we cut and sew it as per human
body shape. Fabrics quality effects directly on the human body.
Objectives of Fabric Testing:
1. To check that the fabric conforms to the fabric specification.
2. To check the effect of physical and chemical treatment.
3. To improve the quality of the products.
4. To meet customer’s needs.
5. research and developed purpose

Fabrics Testing Instruments

Sl Test name Instrument
No
01 Yarn Count Electric balance, Counter pin, magnifying glass.
02 Fabric GSM testing GSM cutter, specimen fabric.
03 Fabric fire testing Gas lighter and fabric.
04 Distortion or Skew Movement Washing machine, Measurement scale.
05 Dimensional stability to washing Measurement Scale, Washing machine, Tumble dryer.
06 Fabric Allergy Testing PH  meter
07 Color fastness to Crocking Crock meter.
08 Color Fastness to Washing Detergent, Water, Jar  and test specimen
09 Fabric Damage testing Tear strength tester.
10 Color  fastness to light Xenon Arc light machine
11 Seam Slippage test Strength tester machine, Sewing thread and needle.
12 Fabric Abrasion Testing Abrasion tester, Scissor, Electric Balance.
13 Crease recovery  Test Crease recovery tester
14 Snapping & Unsnapping Test Button snap pull tester machine
15 Fabric Absorbency Test Fabric, Water.
16 Width of the Fabric – Cut table Cutter machine, Table.
17 Shrinkage Test Washing machine, Shrinkage test Scale.

HaziRafizUddin Tower, Unique Bus Stand, Ashulia, Dhaka.

www.primecapltd.com
 PRIME CAP (BD) LTD.
One Prime. Best Prime. Quality Prime.
HaziRafizUddin Tower, Unique Bus Stand, Ashulia, Dhaka-1349.

Difference types of Fabric Quality Testing, Testing Method and

Pass tolerance

Yarn Count:
Fabric is produced by yarn , so first of all yarn is tested. Yarn Count is a numerical expression of coarseness or
fineness of yarn. This test is done by following the ASTM D1059/1907 method. Its acceptance limit is ±3%.
Standard Method: ASTM D1059/1907
Pass tolerance: Its acceptance limit is ±3%.

Construction Per Inch ( Thread / Unit Length ):

PPI & EPI is the most common term in fabric. PPI means pick per inch and EPI means Ends per inch. The pass
tolerance is + 5% to -3 %*. The test is followed ASTM D3775 method.
Standard Method: ASTM D3775
Pass tolerance: The pass tolerance is + 5% to -3 %*

Fabric GSM testing:

GSM means grams per square meter. It is an important property of the fabric. The more gsm the garments more
weight, The less gsm the garments lighter weight.
Standard Method: ASTM D3776

Fabric fire testing

Fabric is manufactured by various types of yarn. A fabric contains cotton, nylon, polyester, wool, etc. After
manufacturing fabric it needs to dye. Some are appropriate for that dye or not due to the thermal resistance. For
that reason, this test is done to identify the yarn and as well as to select the temperature. This test follows the
ISO-14116 method.
Standard Method: ISO-14116

HaziRafizUddin Tower, Unique Bus Stand, Ashulia, Dhaka.

www.primecapltd.com
 PRIME CAP (BD) LTD.
One Prime. Best Prime. Quality Prime.
HaziRafizUddin Tower, Unique Bus Stand, Ashulia, Dhaka-1349.

Distortion or Skew Movement:

This test method is used as an indication of the propensity of yarns to shift or distort in a fabric. Such distortions
are objectionable due to the resulting changes in appearance. This test follows AATCC 179 method. Pass
tolerance for left Max ±3 % and for right Max ±3 %.
Standard Method: AATCC 179
Pass tolerance: Pass tolerance for left Max ±3 % and for right Max ±3 %.

Dimensional stability to washing after 3 Home laundry Dimension stability is the main function to test. After
making garments if the dimension does not remain the same as before wash, all works will go in vain. To keep an
accurate dimension, the test is used. The dimension stability test follows the AATCC 135 method. Pass tolerance
along lengthwise max 0 to -3% and width wise max 0 to -5% .
Standard Method: AATCC 135
Pass Tolerance: length wise max 0 to -3% and width wise max 0 to -5% .

Fabric Allergy Testing

During Dyeing, many chemicals are used. So the PH value may differ from standard. When garments are worn
on the body , it also Directly reacts with skin. If the fabric becomes Acidic or Alkali it will be hazardous for
human beings. So it needs to check whether the fabric is neutral or not. For this test it follows AATCC 81
method and passes tolerance for Acid Range is max 5.5 and for Alkali 6.5
Standard Method: AATCC 81
Pass Tolerance: pass tolerance for Acid Range is max 5.5 and for Alkali 6.5

Colorfastness to Crocking
Colorfastness means the tendency to bleed the color from fabric. The crocking machine is used to test
HaziRafizUddin Tower, Unique Bus Stand, Ashulia, Dhaka.
www.primecapltd.com
 PRIME CAP (BD) LTD.
One Prime. Best Prime. Quality Prime.
HaziRafizUddin Tower, Unique Bus Stand, Ashulia, Dhaka-1349.

colorfastness. By crocking colorfastness can be tested in dry and wet conditions. It follows AATCC 8 method
and its pass tolerance for dry minimum 3-4 grade and for wet minimum 1.5-3.5 grade according to scale.
Standard Method: AATCC 8
Pass Tolerance: For dry minimum 3-4 grade and for wet minimum 1.5-3.5 grade.

Color Fastness to Washing

Colorfastness to washing means how many colors bleed due to washing. For this test multitier stripes are used
and the specimen is attached with this stripe. Then evaluate the specimen before and after wash. It follows
AATCC 61 method and passes tolerance on wool is max 3.5
Standard Method: AATCC 61
Pass Tolerance: pass tolerance on wool is max 3.5

Fabric Damage Testing:

Strengthens is another property of the fabric. So Strength is tested by tear strength tester machine. This test
follows the ASTM D1424 method and its pass tolerance is a maximum of 1.5-2.5lbs both lengthwise and
widthwise.
Standard Method: ASTM D1424
Pass Tolerance: maximum 1.5-2.5lbs both lengthwise and widthwise.

Colorfastness to light
Colorfastness to light means how much color damage or bleed due to light. For this test xenon arc lamp is used
which produces high heat. It follows AATCC 16 method. Its pass tolerance is 2.5.
Standard Method: AATCC 16
Pass Tolerance: Its pass tolerance is 2.5

Seam Slippage test

Seam slippage is the problem of specially fabrics that contains slippery yarn. This test method is used to
determine the resistance to slippage of filling yarns over warp yarns , or warp yarns over filling yarns, by using a
standard seam. The tolerance load resistance to yarn slippage should be 15 lbs-25lbs and it follows ASTM D434-
95 method.
Standard Method: ASTM D434-95
Pass Tolerance: 15 lbs-25lbs

HaziRafizUddin Tower, Unique Bus Stand, Ashulia, Dhaka.

www.primecapltd.com
 PRIME CAP (BD) LTD.
One Prime. Best Prime. Quality Prime.
HaziRafizUddin Tower, Unique Bus Stand, Ashulia, Dhaka-1349.

Fabric Abrasion Testing

Due to rubbing with a body the entangled small fibers on the surface of fabric create pilling which makes the
outsight of garments very odd. In order to remove such kind of problem pilling resistance test is done. It follows
the method of ISO 12945 for which needs 3+1/2 hours and 12000 revolutions. The acceptance pill rate is 2-4.
Standard Method: ISO 12945
Pass Tolerance: The acceptance pill rate is 2-4 .

Crease recovery Angles

To determine the recovery properties of fabrics by creasing in a loading device for a predetermined time using a
weight. For this test Crease recovery tester is used. The acceptable Crease recovery angle is 75 Deg and it
follows AATCC 66 method.
Standard Method: AATCC 66
Pass Tolerance: The acceptable Crease recovery angle is 75 Deg

Snapping & Unsnapping - Holding strength test- ( 4 PARTS BUTTON)

The test method helps to determine the force required to disengage the fasteners that are attached to the garments
and clothes. It follows ASTM D4846 method and Its acceptance load is min 1.5kg and max 2.5 kg. Snap button
puller tester is used for this test .
Standard Method: ASTM D4846
Pass Tolerance: Its acceptance load is min 1.5kg and max 2.5 kg

Anti-Bacterial Activity & Efficacy

To keep the safe fabric from Bacterial activity & efficacy another test is done. For this kind of test JISL-1902
method is followed.
Standard Method: JISL-1902
Pass Tolerance: No allowance for bacterial activity.

Fabric Test absorbency

Absorbency defines as the ability to absorb water in the fabric. This property is a very important factor for
making garments according to use. This test follows ASTM D123–01.
Standard Method: ASTM D123–01

HaziRafizUddin Tower, Unique Bus Stand, Ashulia, Dhaka.

www.primecapltd.com
 PRIME CAP (BD) LTD.
One Prime. Best Prime. Quality Prime.
HaziRafizUddin Tower, Unique Bus Stand, Ashulia, Dhaka-1349.

Pass Tolerance: Seconds - Before HL 7 and Seconds - After 10 HL 7.

Width of the Fabric – Cuttable:

No Tolerance for minus width. No upper limit
Standard Method: ASTM D3774-18
Pass Tolerance: No Tolerance for minus width.

Shrinkage Test
Shrinkage is a common term in the garments industry. Shrinkage indicates that how much shortage or how much
extend after laundry in measurement. It is denoted as shrinkage%. The more shrink the fabric consumption is
more. as well as costing is more. Its tolerance is ±3 %. This test is done by the ISO 6330 method.
Standard Method: ISO 6330 method.
Pass Tolerance: tolerance is ±3% (It varies fabric wise )

Approved By
Managing Director

HaziRafizUddin Tower, Unique Bus Stand, Ashulia, Dhaka.

www.primecapltd.com