Scribd
Upload
50 views

BSC IP Setup Diagram V03

This document provides a diagram of an IP access connectivity setup between an MSC, SGSN, BSC, and other network components. It shows the interfaces and protocols used, including 8 E1 PCM interfaces between the MSC and BSC, IP transport over DSL, WiMAX, or other networks between components, and RJ45 interfaces for Gb/IP and Gb/FR. Internal networking uses a BSC Ethernet switch and reserved IP addresses within the 192.168.0.0/24 range.

Uploaded by

Ali Sahal
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
50 views

BSC IP Setup Diagram V03

This document provides a diagram of an IP access connectivity setup between an MSC, SGSN, BSC, and other network components. It shows the interfaces and protocols used, including 8 E1 PCM interfaces between the MSC and BSC, IP transport over DSL, WiMAX, or other networks between components, and RJ45 interfaces for Gb/IP and Gb/FR. Internal networking uses a BSC Ethernet switch and reserved IP addresses within the 192.168.0.0/24 range.

Uploaded by

Ali Sahal
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

IP Access Connectivity Diagram

A Interface:
MSC-1
- 8 E1 PCM
- RJ45 terminated
or the BSC MGW
- OPC: ?
- DPC: ?
Abis IP transport: DSL, WIMAX, Corporate, Satellite Gb/IP:
SGSN
- RJ45 terminated
Private/Public IP Gb/FR:
Network
- RJ45 terminated for the
BSC FRIP card

MGW eth-1 Internal BSC


Router ethernet Switch
Traffic Network: Card (192.168.0.0/24)
Abis  192.168.0.2/3/4/5
NOTE! If the Router will do NAT, eth-0 Card eth-1
reserved
the BTS OML target IP has to be
the public IP of the Eth-0 Abis Card  firewalled
router, otherwise, the BTS  to be FRIP
OML target IP will be provided by
Eth-0 BSC Card
the ABIS eth-0 IP customer
BSC  to be provided
eth-1 by customer
Card
Internal customer
eth-0 network IP address

nanoGSM BSC Unit

Support Terminal
customer IP
Network
Secure VPN
provided by OMC-R Server
customer?
Config Manager OMC IP  to be provided
by customer

You might also like