Scribd
Upload
25 views

Alignment Form 4

This shaft alignment report details measurements taken before and after aligning pump P-212. Key measurements include an angular misalignment of 0.12/0.2 degrees and 0.06/0 offset misalignment before adjustment, which were reduced to near 0 after adjustment. Distances A, B, and C were also reported along with adjustment values and the machine's running speed of 2975 RPM.

Uploaded by

Ajwad Haziq
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
25 views

Alignment Form 4

This shaft alignment report details measurements taken before and after aligning pump P-212. Key measurements include an angular misalignment of 0.12/0.2 degrees and 0.06/0 offset misalignment before adjustment, which were reduced to near 0 after adjustment. Distances A, B, and C were also reported along with adjustment values and the machine's running speed of 2975 RPM.

Uploaded by

Ajwad Haziq
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

SHAFT ALIGNMENT REPORT

MACHINE TO BE ALIGNED : PUMP P-212 (LP TRANSFER PUMP)

DISTANCE DATA : A 65mm


B 45mm
C 40mm

BEFORE AFTER
MEASUREMENT ITEM
VERTICAL HORIZONTAL VERTICAL HORIZONTAL
ANGULAR MISALIGNMENT 0.12 0.2 0 -0.03
OFFSET MISALIGNMENT 0.06 0 0.04 0
ADJUSTMENT FRONT -0.42 -0.54 -0.01 -0.04
ADJUSTMENT REAR -0.83 -1.22 -0.03 -0.06

MACHINE RUNNING SPEED : 2975 RPM

You might also like