Scribd
Upload
99 views

ScanX Driver Installation and Software Setup

The document provides instructions for installing and setting up the ScanX digital x-ray driver. It outlines 14 steps including downloading and installing the driver, configuring dynamic rendering settings, copying files to the Eaglesoft shared folder, and adjusting preferences within the Patterson software. When completed, the ScanX will be ready for use within the Patterson system.

Uploaded by

Rafael Castro
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
99 views

ScanX Driver Installation and Software Setup

The document provides instructions for installing and setting up the ScanX digital x-ray driver. It outlines 14 steps including downloading and installing the driver, configuring dynamic rendering settings, copying files to the Eaglesoft shared folder, and adjusting preferences within the Patterson software. When completed, the ScanX will be ready for use within the Patterson system.

Uploaded by

Rafael Castro
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Patterson Technology Center

1201 Althoff Drive | Effingham, IL 62401 | 800.475.5036

ScanX Driver Installation and Setup

1. Close all running programs.


2. Log into the computer as the Administrator.
3. Install the Eaglesoft ScanX Digital Integration prior to installing the ScanX Driver.
4. Download the latest ScanX Driver from the Air Techniques website:
http://www.airtechniques.com/drivers/
5. Disconnect the ScanX USB cable from the PC prior to installation.

6. To start the driver installation,


Right Mouse Click over the driver
and Run as Administrator.

7. Click Next on the installation


screen.

**The version may vary


depending on the driver that was
downloaded from the Air
Technique’s Website.

Page 1 of 4 ScanX_Driver_Installation_and_Software_Setup Rev 006 | 06.12.19


Printed copies of this document are considered uncontrolled.
Patterson Technology Center
1201 Althoff Drive | Effingham, IL 62401 | 800.475.5036

8. Verify all boxes are checked for


the Installation options and then
click Install.

9. Click Finish.

**If you do not have a ScanX Swift


machine uncheck the option to
Start the ScanX Swift Configuration
Utility before clicking Finish.

Page 2 of 4 ScanX_Driver_Installation_and_Software_Setup Rev 006 | 06.12.19


Printed copies of this document are considered uncontrolled.
Patterson Technology Center
1201 Althoff Drive | Effingham, IL 62401 | 800.475.5036

10. Browse to C|Program Files (x86)|Air


Techniques|Scanx|Update.
Copy the contents of this folder to
C|Eaglesoft|Shared Files folder.

11. Connect the ScanX to the PC. The computer


should automatically detect the new
hardware.

12. Dynamic Rendering (DR) needs to be


configured for preferred imaging quality.

Browse to Start|All Programs|Air


Techniques|ScanX|Configure DR

On the Configuration Screen:


--- Select Next
--- Fill in the option for ScanX Image with
Dynamic Rendering then select Next
--- Fill in the option for ScanX Image with
Dynamic Rendering then select Next
--- Select Finish

Page 3 of 4 ScanX_Driver_Installation_and_Software_Setup Rev 006 | 06.12.19


Printed copies of this document are considered uncontrolled.
Patterson Technology Center
1201 Althoff Drive | Effingham, IL 62401 | 800.475.5036

13. Launch the software then select


File|Preferences (General
Preferences)|Xray tab. Click on the
ScanX button under Device Properties.

14. Uncheck the box for Save Image


Enhancement Settings after each Scan.

Set the Image Enhancement Settings to


None. Leave Limit High and Low to
10000. (Do this for each Resolution
Setting).

Click Save.

Click OK to close out of the


Preferences.

The Scanx is now ready to be used within the Patterson Software. Contact the Patterson Technology Center
for assistance at 800.475.5036

Page 4 of 4 ScanX_Driver_Installation_and_Software_Setup Rev 006 | 06.12.19


Printed copies of this document are considered uncontrolled.

You might also like