Scribd
Upload
4K views7 pages

Aluminium Cleaner and Polisher Formulations and Production Process

This e-book discusses formulations and production processes for concentrated aluminum surface cleaning fluids. It provides 3 formulations that contain surfactants, alkalis, and silicates. The production process involves mixing the ingredients into water and adjusting amounts based on market conditions. The concentrated fluids are diluted 10-25 times and packaged for sale. All rights to the publication belong to Solverchembooks.

Uploaded by

Rohullah Baqiri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views7 pages

Aluminium Cleaner and Polisher Formulations and Production Process

This e-book discusses formulations and production processes for concentrated aluminum surface cleaning fluids. It provides 3 formulations that contain surfactants, alkalis, and silicates. The production process involves mixing the ingredients into water and adjusting amounts based on market conditions. The concentrated fluids are diluted 10-25 times and packaged for sale. All rights to the publication belong to Solverchembooks.

Uploaded by

Rohullah Baqiri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

INDUSTRIAL PRODUCTS E BOOKS

INDUSTRIAL
PRODUCTS
FORMULATIONS

E – BOOKS
INDUSTRIAL PRODUCTS E BOOKS

Allrights of this publications belongs to

SOLVERCHEMBOOKS
INDUSTRIAL DETERGENT PRODUCTS E BOOKS

ALUMINIUM
CLEANER AND POLISHER

FORMULATIONS

E – BOOKS
CONTENT
1 – CONCENTRATED ALUMINIUM SURFACE CLEANING FLUID

FORMULATION AND PRODUCTION PROCESS – 1

2 – CONCENTRATED ALUMINIUM SURFACE CLEANING FLUID

FORMULATION AND PRODUCTION PROCESS – 2

3 – CONCENTRATED ALUMINIUM SURFACE CLEANING FLUID

FORMULATION AND PRODUCTION PROCESS – 3


CONCENTRATED
ALUMINIUM SURFACE CLEANER FLUID
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 COCAMIDOPROPYL BETAINE 61789-40-0 7

2 COCAMIDE DEA 68603-42-9 3

3 NONYLPHENOL ETHOXYLATE 10 EO 26027-38-3 3

4 SODIUM HYDROXIDE % 100 1310 -73-2 2

5 SODIUM SILICATE 1344 -09-8 5


6 DEINOIZED WATER 7732 – 18-5 80

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.


Add betaine, cocamide and nonylphenol ethoxylate. Dissolve three
imgredients in the water thoroughly. Add sodium hydroxide and sodium
silicate during constant mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed


depending condition of market.

NOTE: The above formulated product is concentrated. So, it is diluted


1 : 10 or 1: 20 ratio with clean water and packing to sell.

** 1 **
CONCENTRATED
ALUMINIUM SURFACE CLEANER FLUID
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 COCAMIDOPROPYL BETAINE 61789-40-0 5

2 COCAMIDE DEA 68603-42-9 3

3 GLUCOPAN 26027-38-3 3

4 POTASSIUM HYDROXIDE % 100 1310 – 58-3 2

5 SODIUM SILICATE 1344 -09-8 2


6 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 5

7 DEINOIZED WATER 7732 – 18-5 80

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.


Add betaine, cocamide and glucopan. Dissolve three imgredients in the
water thoroughly. Add potassium hydroxide, potassium tripolyphosphate
and sodium silicate during constant mixing. Continue to stirr until mixture
is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed


depending condition of market.

NOTE: The above formulated product is concentrated. So, it is diluted


1 : 10 or 1: 20 ratio with clean water and packing to sell.

** 2 **
CONCENTRATED
ALUMINIUM SURFACE CLEANER FLUID
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34 -2 5

2 SODIUM METASILICATE 13517-24-3 2

3 NONYLPHENOL ETHOXYLATE 10 EO 26027-38-3 2

4 POTASSIUM HYDROXIDE % 100 1310 – 58-3 2

5 SODIUM SILICATE 1344 -09-8 2


6 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 5

7 DEINOIZED WATER 7732 – 18-5 82

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.


Add sodium lauryl ether sulfate and nonylphenol ethoxylate. Dissolve
two imgredients in the water thoroughly. Add sodium metasilicate and
mix well. Add potassium hydroxide, potassium tripolyphosphate and
sodium silicate during constant mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed


depending condition of market.

NOTE: The above formulated product is concentrated. So, it is diluted


1 : 10 or 1: 25 ratio with clean water and packing to sell.

** 3 **

You might also like