Scribd
Upload
48 views

Panel Connectors

The document describes 'elmex' PV solar panel connectors models EMPVPCM4N and EMPVPCF4N. The connectors are constructed from flame retardant thermoplastic suitable for UV exposure and used to connect photovoltaic devices like inverters. They have an IP68 rating and silicon o-rings to protect against water and dust ingress. The connectors are compatible with other brands and have specifications like a 1500V DC rating and copper contacts.

Uploaded by

SEO BDM
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
48 views

Panel Connectors

The document describes 'elmex' PV solar panel connectors models EMPVPCM4N and EMPVPCF4N. The connectors are constructed from flame retardant thermoplastic suitable for UV exposure and used to connect photovoltaic devices like inverters. They have an IP68 rating and silicon o-rings to protect against water and dust ingress. The connectors are compatible with other brands and have specifications like a 1500V DC rating and copper contacts.

Uploaded by

SEO BDM
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

‘elmex’ PV Solar Panel Connectors

‘elmex’ PV Solar Panel connectors EMPVPCM4N and EMPVPCF4N are applicable for panel moun ng connec on. They are constructed
using flame retardant engineering thermoplas c suitable for exposure to UV rays and for applica on in PV power genera on system.
‘elmex’ panel connectors are designed for use in connec on for photovoltaic devices like DC Distribu on Box, Inverter, String Combiner
Box, etc. These connectors are provided with hexagonal nut for fixing and ghtening it on moun ng surface. A silicon rubber o-ring is
provided between panel connector surface and the wall of the photovoltaic enclosure ensuring protec on against ingress of water & dust.
‘elmex’ panel connectors have ma ng compa bility not only with ‘elmex’ straight connectors but also with straight connectors of
leading interna onal makes having similar construc on.

with NEC Interlock* with NEC Interlock*

EMPVPCM4N EMPVPCF4N

Features
v TUV Cer fied v Low Contact Resistance
v Snap Fit Locking Arrangement v Provides UV Protec on (Tested for 500 hrs as per ISO 4892-2)
v IP 68 Protec on when mated v Tested as per Interna onal Standards / IEC 62852

Descrip on Specifica ons


Rated Voltage 1500V DC
25A (2.5 mm ), 30A (4.0 mm2, 6.0 mm2)
2
Rated Current
RMS Test Voltage 8 kV (1500V)
Impulse with stand Voltage 16 kV
Degree of Protec on IP 68
Contact Material Copper with Tin Pla ng
Ambient Temperature -40o C to +85o C
Max. Opera ng Temp. +110O C
Pollu on Degree 3
Contact Resistance < 0.5 mΩ
Inser on Force ≤ 50 N
Withdrawal Force ≥ 50 N
Locking System Snap In R60126561

Note: Our Connectors are suitable for PV Solar Cables of 2.5 / 4.0 / 6.0 mm2 diameter (As per 2Pfg 1169 / EN 50618).
*Connectors when mated, need a tool to open in accordance with NEC 2014.

Manufactured in Vadodara, Gujarat, India

You might also like