Scribd
Upload
179 views

Toranit 410

TORANIT 410 is a partially cured NBR latex with good crush resistance, recommended for sealing oils, fuels, and water. It has a density of 1.00 g/cm3, compressibility of 25-40%, and minimum tensile strength and creep compression strength. When tested with ASTM oil #3, fuel B, and cooling liquid, it showed thickness and weight increases of less than 10-15% and 40-60% respectively.

Uploaded by

vagner boldi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
179 views

Toranit 410

TORANIT 410 is a partially cured NBR latex with good crush resistance, recommended for sealing oils, fuels, and water. It has a density of 1.00 g/cm3, compressibility of 25-40%, and minimum tensile strength and creep compression strength. When tested with ASTM oil #3, fuel B, and cooling liquid, it showed thickness and weight increases of less than 10-15% and 40-60% respectively.

Uploaded by

vagner boldi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data Sheet

Product: TORANIT 410

Description: Partially cured NBR latex

Properties: Good crush resistence. Recommended for sealing oils, fuels, and water.

PROPERTY STD UNIT VALUE

Density ASTM F 1315 g/cm3 (lb/ft3) 1.00 (62.43)

Compressibility % 25 – 40
ASTM F 36/J (5000 psi)
Recovery % 20 min.

Tensile strength MD ASTM F 152 MPa (psi) 7 (1015) min.


Creep compression strength
DIN 52913 MPa 26
(175 °C, 40MPa, 16h, th. 2 mm)

ASTM OIL n°.3


ASTM F 146
Thickness increase % <10
5h / 150°C
Weight increase % <50

ASTM FUEL B
ASTM F 146
Thickness increase % <10
5h / 20°C
Weight increase % <40

COOLING LIQUID
ASTM F 146
Thickness increase % <15
5h / 110°C
Weight increase % <60
Cod.G027, emis. 01/03/06, rev.2, del 01/08/19

Web: Factory and Office USA: Factory and Office Italy / EU:
omniamaterials.com Omnia Advanced Materials LLC Omniafibre S.r.l.
P.O. Box 410 Via G. Matteotti, 1
Email: [email protected] 9567 Main St. 81011 Alife (CE)
Beaver Falls, NY 13305 +39 0823 918234
TEL +1 (315) 346-7300 Sole Member Company Nominal value of the capital
subscribed € 20.000 t.d.; Business Registration Code in Caserta
FAX +1 (315) 346-7301 CCIAA and VAT Number IT03592010619

You might also like