Stainless Steel Grade 202 (UNS S20200)
Stainless Steel Grade 202 (UNS S20200)
Topics Covered
Introduction
Chemical Composition
Mechanical Properties
Other Designations
Manufacturing Process
Applications
Introduction
Grade 202 stainless steel is a type of Cr-Ni-Mn stainless with similar properties to
A240/SUS 302 stainless steel. The toughness of grade 202 at low temperatures is
excellent.
It is one of the most widely used precipitation hardening grades, and possesses good
corrosion resistance, toughness, high harness, and strength.
Chemical Composition
The chemical composition of grade 202 stainless steel is outlined in the following table.
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=8209
1
/3
Stainless Steel Grade 202 (UNS S20200)
Mechanical Properties
The mechanical properties of grade 202 stainless steel are displayed in the following table.
Other Designations
Equivalent materials to grade 202 stainless steel are given below:
Manufacturing Process
The machinability of grade 202 stainless steel produces long, gummy chips. Machining can
also be performed in the annealed condition. For heat treatment, the material has to be
soaked at 1038°C (1900°F) for 30 min and cooled below 16°C (60°F) for full martensite
transformation. The material can be welded by common fusion and resistance methods;
however, this steel should not be joined using oxyacetylene welding method. The
recommended filler metal is AWS E/ER630. Forging can be done by pre-soaking for 1 h at
1177°C (2150°F). Forging below 1010°C (1850°F) is not advisable.
Applications
The grade 202 steel can be made into plates, sheets, and coils to be used in the following:
Restaurant equipment
Cooking utensils
Sinks
Automotive trim
Architectural applications such as windows and doors
Railway cars
Trailers
Hose clamps.
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=8209
2
/3
Stainless Steel Grade 202 (UNS S20200)
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=8209
3
/3