Scribd
Upload
66 views

Aa 11

This document contains the analysis of a 5 node space frame structure with 4 beams. It includes the model details like geometry, materials, loads and supports. The results show small displacements at the nodes and beams for the given load case with the maximum displacement of 0.044 mm.

Uploaded by

Aamir Saifi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views

Aa 11

This document contains the analysis of a 5 node space frame structure with 4 beams. It includes the model details like geometry, materials, loads and supports. The results show small displacements at the nodes and beams for the given load case with the maximum displacement of 0.044 mm.

Uploaded by

Aamir Saifi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Job No Sheet No Rev

2008400000005 1
Part
Software licensed to HP
Job Title Abhishek kumar gupta Ref

By Date15-Dec-22 Chd

Client File Structure1.std Date/Time 15-Dec-2022 01:29

Job Information
Engineer Checked Approved

Name:
Date: 15-Dec-22

Project ID
Project Name

Structure Type SPACE FRAME

Number of Nodes 5 Highest Node 5


Number of Elements 4 Highest Beam 4

Number of Basic Load Cases -2


Number of Combination Load Cases 0

Included in this printout are data for:


All The Whole Structure

Included in this printout are results for load cases:


Type L/C Name

Primary 1 LOAD CASE 1

Nodes
Node X Y Z
(mm) (mm) (mm)
1 0.000 0.000 0.000
2 500.000 0.000 0.000
3 1E+3 0.000 0.000
4 1.5E+3 0.000 0.000
5 1.8E+3 0.000 0.000

Beams
Beam Node A Node B Length Property 
(mm) (degrees)
1 1 2 500.000 1 0
2 2 3 500.000 1 0
3 3 4 500.000 1 0
4 4 5 300.000 1 0

Materials
Mat Name E  Density 
(kN/mm2) (kg/m3) (/°C)
1 STEEL 205.000 0.300 7.83E+3 12E -6
2 STAINLESSSTEEL 197.930 0.300 7.83E+3 18E -6
3 ALUMINUM 68.948 0.330 2.71E+3 23E -6

Print Time/Date: 15/12/2022 01:30 STAAD.Pro V8i (SELECTseries 6) 20.07.11.90 Print Run 1 of 7
Job No Sheet No Rev
2008400000005 2
Part
Software licensed to HP
Job Title Abhishek kumar gupta Ref

By Date15-Dec-22 Chd

Client File Structure1.std Date/Time 15-Dec-2022 01:29

Supports
Node X Y Z rX rY rZ
(kN/mm) (kN/mm) (kN/mm) (kN-m/deg) (kN-m/deg) (kN-m/deg)
1 Fixed Fixed Fixed Fixed Fixed Fixed
2 Fixed Fixed Fixed - - -
3 Fixed Fixed Fixed - - -
4 Fixed Fixed Fixed - - -
5 Fixed Fixed Fixed - - -

Node Displacements
Node L/C X Y Z Resultant rX rY rZ
(mm) (mm) (mm) (mm) (rad) (rad) (rad)
1 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000 0.000 0.000
2 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000 0.000 -0.000
3 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000 0.000 -0.000
4 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000 0.000 0.000
5 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000 0.000 -0.000

Beam Displacement Detail


Displacements shown in italic indicate the presence of an offset
Beam L/C d X Y Z Resultant
(mm) (mm) (mm) (mm) (mm)
1 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000
50.000 -0.000 -0.001 0.000 0.001
100.000 -0.000 -0.004 0.000 0.004
150.000 -0.000 -0.008 0.000 0.008
200.000 -0.000 -0.011 0.000 0.011
250.000 -0.000 -0.011 0.000 0.011
300.000 0.000 -0.008 0.000 0.008
350.000 -0.000 -0.004 0.000 0.004
400.000 -0.000 0.000 0.000 0.000
450.000 0.000 0.002 0.000 0.002
500.000 0.000 0.000 0.000 0.000
2 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000
50.000 -0.000 -0.008 0.000 0.008
100.000 0.000 -0.019 0.000 0.019
150.000 0.000 -0.030 0.000 0.030
200.000 -0.000 -0.039 0.000 0.039
250.000 -0.000 -0.041 0.000 0.041
300.000 0.000 -0.036 0.000 0.036
350.000 -0.000 -0.025 0.000 0.025
400.000 0.000 -0.013 0.000 0.013
450.000 0.000 -0.004 0.000 0.004
500.000 0.000 0.000 0.000 0.000
3 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000
50.000 -0.000 -0.006 0.000 0.006
100.000 -0.000 -0.018 0.000 0.018
150.000 0.000 -0.032 0.000 0.032
200.000 -0.000 -0.044 0.000 0.044

Print Time/Date: 15/12/2022 01:30 STAAD.Pro V8i (SELECTseries 6) 20.07.11.90 Print Run 2 of 7
Job No Sheet No Rev
2008400000005 3
Part
Software licensed to HP
Job Title Abhishek kumar gupta Ref

By Date15-Dec-22 Chd

Client File Structure1.std Date/Time 15-Dec-2022 01:29

Beam Displacement Detail Cont...


Beam L/C d X Y Z Resultant
(mm) (mm) (mm) (mm) (mm)
250.000 0.000 -0.051 0.000 0.051
300.000 0.000 -0.048 0.000 0.048
350.000 -0.000 -0.039 0.000 0.039
400.000 -0.000 -0.026 0.000 0.026
450.000 -0.000 -0.012 0.000 0.012
500.000 0.000 0.000 0.000 0.000
4 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000
30.000 0.000 0.005 0.000 0.005
60.000 -0.000 0.008 0.000 0.008
90.000 -0.000 0.010 0.000 0.010
120.000 0.000 0.011 0.000 0.011
150.000 0.000 0.011 0.000 0.011
180.000 0.000 0.010 0.000 0.010
210.000 0.000 0.008 0.000 0.008
240.000 -0.000 0.006 0.000 0.006
270.000 -0.000 0.003 0.000 0.003
300.000 0.000 0.000 0.000 0.000

Beam Relative Displacement Detail


Beam L/C d Disp. x Disp. y Disp. z Resultant
(mm) x (mm) y (mm) z (mm) (mm)
1 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000
50.000 -0.000 -0.001 0.000 0.001
100.000 -0.000 -0.004 0.000 0.004
150.000 -0.000 -0.008 0.000 0.008
200.000 -0.000 -0.011 0.000 0.011
250.000 -0.000 -0.011 0.000 0.011
300.000 0.000 -0.008 0.000 0.008
350.000 -0.000 -0.004 0.000 0.004
400.000 -0.000 0.000 0.000 0.000
450.000 0.000 0.002 0.000 0.002
500.000 0.000 0.000 0.000 0.000
2 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000
50.000 -0.000 -0.008 0.000 0.008
100.000 0.000 -0.019 0.000 0.019
150.000 0.000 -0.030 0.000 0.030
200.000 -0.000 -0.039 0.000 0.039
250.000 -0.000 -0.041 0.000 0.041
300.000 0.000 -0.036 0.000 0.036
350.000 -0.000 -0.025 0.000 0.025
400.000 0.000 -0.013 0.000 0.013
450.000 0.000 -0.004 0.000 0.004
500.000 0.000 0.000 0.000 0.000
3 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000
50.000 -0.000 -0.006 0.000 0.006
100.000 -0.000 -0.018 0.000 0.018
150.000 0.000 -0.032 0.000 0.032

Print Time/Date: 15/12/2022 01:30 STAAD.Pro V8i (SELECTseries 6) 20.07.11.90 Print Run 3 of 7
Job No Sheet No Rev
2008400000005 4
Part
Software licensed to HP
Job Title Abhishek kumar gupta Ref

By Date15-Dec-22 Chd

Client File Structure1.std Date/Time 15-Dec-2022 01:29

Beam Relative Displacement Detail Cont...


Beam L/C d Disp. x Disp. y Disp. z Resultant
(mm) x (mm) y (mm) z (mm) (mm)
200.000 -0.000 -0.044 0.000 0.044
250.000 0.000 -0.051 0.000 0.051
300.000 0.000 -0.048 0.000 0.048
350.000 -0.000 -0.039 0.000 0.039
400.000 -0.000 -0.026 0.000 0.026
450.000 -0.000 -0.012 0.000 0.012
500.000 0.000 0.000 0.000 0.000
4 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000
30.000 0.000 0.005 0.000 0.005
60.000 -0.000 0.008 0.000 0.008
90.000 -0.000 0.010 0.000 0.010
120.000 0.000 0.011 0.000 0.011
150.000 0.000 0.011 0.000 0.011
180.000 0.000 0.010 0.000 0.010
210.000 0.000 0.008 0.000 0.008
240.000 -0.000 0.006 0.000 0.006
270.000 -0.000 0.003 0.000 0.003
300.000 0.000 0.000 0.000 0.000

Reactions
Horizontal Vertical Horizontal Moment
Node L/C FX FY FZ MX MY MZ
(kN) (kN) (kN) (kN-m) (kN-m) (kN-m)
1 1:LOAD CASE 1 0.000 4.129 0.000 0.000 0.000 0.488
2 1:LOAD CASE 1 0.000 14.820 0.000 0.000 0.000 0.000
3 1:LOAD CASE 1 0.000 22.526 0.000 0.000 0.000 0.000
4 1:LOAD CASE 1 0.000 10.896 0.000 0.000 0.000 0.000
5 1:LOAD CASE 1 0.000 7.629 0.000 0.000 0.000 0.000

Beam Maximum Moments


Distances to maxima are given from beam end A.
Beam Node A Length L/C d Max My d Max Mz
(mm) (mm) (kN-m) (mm) (kN-m)
1 1 500.000 1:LOAD CASE 1 Max +ve 0.000 0.000 500.000 0.923
Max -ve 0.000 0.000 250.000 -0.544
2 2 500.000 1:LOAD CASE 1 Max +ve 0.000 0.000 500.000 1.449
Max -ve 0.000 0.000 250.000 -1.314
3 3 500.000 1:LOAD CASE 1 Max +ve 0.000 0.000 0.000 1.449
Max -ve 0.000 0.000 250.000 -1.420
4 4 300.000 1:LOAD CASE 1 Max +ve 0.000 0.000 0.000 0.711
Max -ve 0.000 0.000 300.000 -0.000

Print Time/Date: 15/12/2022 01:30 STAAD.Pro V8i (SELECTseries 6) 20.07.11.90 Print Run 4 of 7
Job No Sheet No Rev
2008400000005 5
Part
Software licensed to HP
Job Title Abhishek kumar gupta Ref

By Date15-Dec-22 Chd

Client File Structure1.std Date/Time 15-Dec-2022 01:29

Beam Maximum Shear Forces


Distances to maxima are given from beam end A.
Beam Node A Length L/C d Max Fz d Max Fy
(mm) (mm) (kN) (mm) (kN)
1 1 500.000 1:LOAD CASE 1 Max +ve 0.000 0.000 0.000 4.129
Max -ve 0.000 0.000 291.667 -5.871
2 2 500.000 1:LOAD CASE 1 Max +ve 0.000 0.000 0.000 8.949
Max -ve 0.000 0.000 291.667 -11.051
3 3 500.000 1:LOAD CASE 1 Max +ve 0.000 0.000 0.000 11.475
Max -ve 0.000 0.000 291.667 -8.525
4 4 300.000 1:LOAD CASE 1 Max +ve 0.000 0.000 0.000 2.371
Max -ve 0.000 0.000

Beam Maximum Axial Forces


Distances to maxima are given from beam end A.
Beam Node A Length L/C d Max Fx
(mm) (mm) (kN)
1 1 500.000 1:LOAD CASE 1 Max +ve 0.000 0.000
Max -ve 0.000 0.000
2 2 500.000 1:LOAD CASE 1 Max +ve 0.000 0.000
Max -ve 0.000 0.000
3 3 500.000 1:LOAD CASE 1 Max +ve 0.000 0.000
Max -ve 0.000 0.000
4 4 300.000 1:LOAD CASE 1 Max +ve 0.000 0.000
Max -ve 0.000 0.000

Beam Maximum Forces by Section Property


Axial Shear Torsion Bending
Section Max Fx Max Fy Max Fz Max Mx Max My Max Mz
(kN) (kN) (kN) (kN-m) (kN-m) (kN-m)
Rect 0.10x0.20 Max +ve 0.000 11.475 0.000 0.000 0.000 1.449
Max -ve 0.000 -11.051 0.000 0.000 0.000 -1.420

Print Time/Date: 15/12/2022 01:30 STAAD.Pro V8i (SELECTseries 6) 20.07.11.90 Print Run 5 of 7
Job No Sheet No Rev
2008400000005 6
Part
Software licensed to HP
Job Title Abhishek kumar gupta Ref

By Date15-Dec-22 Chd

Client File Structure1.std Date/Time 15-Dec-2022 01:29

Max: 0.011 mm
500 mm 500 mm 500 mm 300 mm
Max: 0.011 mm

Max: 0.041 mm
Max: 0.051 mm

Y
Z X Load 1 : Displacement
Displacement - mm

Whole Structure Displacements 9e-005mm:1mm 1 LOAD CASE 1 (Input data was modified after picture taken)

Max: 11.475 kN

Max: 2.371 kN
500 mm 500 mm 500 mm 300 mm

Max: -5.871 kN

Max: -11.051 kN

Y
Z X Load 1 : Shear Y
Force - kN

Whole Structure Fy 0.025kN:1mm 1 LOAD CASE 1 (Input data was modified after picture taken)

Print Time/Date: 15/12/2022 01:30 STAAD.Pro V8i (SELECTseries 6) 20.07.11.90 Print Run 6 of 7
Job No Sheet No Rev
2008400000005 7
Part
Software licensed to HP
Job Title Abhishek kumar gupta Ref

By Date15-Dec-22 Chd

Client File Structure1.std Date/Time 15-Dec-2022 01:29

Max: 1.449 kN-m

Max: 0.923 kN-m


Max: 0.711 kN-m

Max:
0 kN 0 kN
kN-m 500 mm Max:
0 kN 0 kN
kN-m 500 mm Max:
0 kN 0 kN
kN-m 500 mm Max:
0 kN 0 kN
kN-m
300 mm 0 kN

Y
Z X Load 1 : Axial Force : Shear Z : Bending Z : Bending Y
Moment - kN-m : Force - kN

Whole Structure My 0.009kN-m:1mm Mz 0.002kN-m:1mm Fz 5e-008kN:1mm Fx 3e-011kN:1mm 1 LOAD CASE 1 (Input data was
modified after picture taken)

Print Time/Date: 15/12/2022 01:30 STAAD.Pro V8i (SELECTseries 6) 20.07.11.90 Print Run 7 of 7

You might also like