Scribd
Upload
3K views1 page

Allison Transmission Service Reset

This document provides instructions for resetting prognostics features on Allison transmission service wrenches. The wrench icon will illuminate after turning the key to indicate prognostics are enabled. If the icon remains on or flashes, it indicates an issue with the clutch, filter, or fluid life. To reset the oil life monitor, press and hold the mode button for 10 seconds in oil life monitor mode or perform a specific shift sequence. The filter life monitor can be reset similarly by holding the mode button or performing another shift sequence. The transmission health monitor must be manually reset using diagnostic software after fixing a clutch issue. Exiting prognostics involves pressing neutral or diagnostics buttons.

Uploaded by

Richard Calderón
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views1 page

Allison Transmission Service Reset

This document provides instructions for resetting prognostics features on Allison transmission service wrenches. The wrench icon will illuminate after turning the key to indicate prognostics are enabled. If the icon remains on or flashes, it indicates an issue with the clutch, filter, or fluid life. To reset the oil life monitor, press and hold the mode button for 10 seconds in oil life monitor mode or perform a specific shift sequence. The filter life monitor can be reset similarly by holding the mode button or performing another shift sequence. The transmission health monitor must be manually reset using diagnostic software after fixing a clutch issue. Exiting prognostics involves pressing neutral or diagnostics buttons.

Uploaded by

Richard Calderón
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Allison Transmission Service Wrench Reset

Prognostic Features
5th Generation Electronic Controls Shift Selectors display
prognostics in text form to Provide at-a-glance status of Oil
Life, Filter Life and Transmission Health. PUSH BUTTON

The WRENCH ICON will illuminate briefly after you turn the
key to the run position on your Allison-equipped vehicle to
indicate that prognostics are enabled. If the WRENCH ICON
remains on or flashes, this indicates there is a service issue BUMP LEVER
relating to clutch, filter or fluid life.

Resetting Prognostics
Oil Life Monitor
For either a push button or bump lever shift selector, press and hold the MODE button for
approximately 10 seconds while in Oil Life Monitor Mode.
OR
For either a push button or bump lever shift selector perform the following shift sequence with
the ignition on, but the engine off. Do not stop the sequence for more than three seconds
once you have started
N-D-N-D-N-R-N
FILTER LIFE MONITOR
For either a push button or bump lever shift selector, press and hold the MODE button for
approximately 10 seconds while in Filter Life Monitor mode.
OR
For either a pushbutton or bump lever shift selector, perform the following shift sequence with
the ignition on, but the engine off. Do not stop the sequence for more than three seconds
once you have started.
N-R-N-R-N-D-N
Transmission Health Monitor
This must be reset manually using Allison DOC# for PC diagnostic program after correcting a clutch system issue

Exit Prognostics
For a pushbutton shift selector, press the N(NEUTRAL) range button.

For a bump lever shifter, press the DIAGNOSTICS range button until back to range display.

You might also like