Scribd
Upload
131 views

Chatrgpt 1

To create a website hosted on an ESP camera module, you will need to program an ESP32 or ESP8266 microcontroller to act as a web server. The code samples show how to set up a web server on port 80 that listens for connections and handles different requests - sending an HTML page with a capture button for the root page, capturing an image and sending the JPEG for the /capture page, and sending a 404 page for other requests. The code takes pictures with the ESP32-CAM and sends them to clients when requested over WiFi.

Uploaded by

Georgi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
131 views

Chatrgpt 1

To create a website hosted on an ESP camera module, you will need to program an ESP32 or ESP8266 microcontroller to act as a web server. The code samples show how to set up a web server on port 80 that listens for connections and handles different requests - sending an HTML page with a capture button for the root page, capturing an image and sending the JPEG for the /capture page, and sending a 404 page for other requests. The code takes pictures with the ESP32-CAM and sends them to clients when requested over WiFi.

Uploaded by

Georgi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

To create a website hosted on an ESP camera module, you will need to use a

microcontroller with WiFi capabilities (such as an ESP32 or an ESP8266) and program


it to act as a web server.

Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");

// Start the web server


startServer();
}

void loop() {
// Handle incoming connections
handleClient();
}

void startServer() {
// Start the web server on port 80
WiFiServer server(80);
server.begin();
Serial.println("Web server started");
}

void handleClient() {
// Check for incoming connections
WiFiClient client = server.available();
if (client) {
Serial.println("New client");
// Read the request
String request = client.readStringUntil('\r');
Serial.println(request);
client.flush();

// Check if the request is for the root page


if (request.indexOf("/") != -1) {
// Send the HTML page
client.println("HTTP/1.1 200 OK");
client.println("Content-Type: text/html");
client.println(""); // do not forget this one
client.println("<!DOCTYPE HTML>");
client.println("<html>");
client.println("<head><title>ESP32-CAM</title></head>");
client.println("<body>");
client.println("<h1>ESP32-CAM</h1>");
client.println("<p>Welcome to the ESP32-CAM web server!</p>");
client.println("<p>Click the button below to take a picture:</p>");
client.println("<form method='get' action='/capture'>");
client.println("<button type='submit'>Capture</button>");
client.println("</form>");
client.println("</body>");
client.println("</html>");
client.stop();
Serial.println("Client disconnected");
}
// Check if the request is for the /capture page
else if (request.indexOf("/capture") != -1) {
// Take a picture and store it in the buffer
cam.takePicture(imageBuffer);
// Send the image to the client
client.println("HTTP

[email protected]
can you continue the code
Certainly! Here is the rest of the code to create a website hosted on an ESP32-
based camera module:

Copy code
/1.1 200 OK");
client.println("Content-Type: image/jpeg");
client.println("Content-Disposition: inline; filename=capture.jpg");
client.println("");
client.write(imageBuffer, CAM_SIZE);
client.stop();
Serial.println("Client disconnected");
}
// Send a 404 response for any other requests
else {
client.println("HTTP/1.1 404 Not Found");
client.println("Content-Type: text/html");
client.println("");
client.println("<!DOCTYPE HTML>");
client.println("<html>");
client.println("<head><title>404 Not Found</title></head>");
client.println("<body>");
client.println("<h1>404 Not Found</h1>");
client.println("<p>The requested URL was not found on this server.</p>");
client.println("</body>");
client.println("</html>");
client.stop();
Serial.println("Client disconnected");
}
}
}
This code creates a simple web server that listens for incoming connections on port
80. When a client connects, the server reads the request and determines what action
to take based on the request URL. If the request is for the root page (/), the
server sends an HTML page with a button that allows the user to take a picture. If
the request is for the /capture page, the server takes a picture with the camera
and sends the image to the client. For any other requests, the server sends a 404
Not Found response.

To use this code, you will need to replace YOUR_SSID and YOUR_PASSWORD with your
WiFi credentials, and include the necessary libraries at the top of the sketch
(e.g. WiFi.h and ESP32-CAM.h). You will also need to make sure that the ESP camera
module is connected to the microcontroller and configured correctly.

I hope this helps! Please let me know if you have any additional questions or need
further assistance.

You might also like