<TITLE OF THE THESIS>

A Thesis Submitted
In Partial Fulfilment of the Requirements for the Degree of

Batchelor of Technology
In
Electronic and Communication Engineering

Submitted by
<Name of the student>
(Roll Number)
Under the Supervision of
Dr. SUJIT K. MANDAL
Assistant Professor

Microwave and Antenna Research Laboratory

ELECTRONICS AND COMMUNICATION ENGINEERING DEPARTMENT

राष्ट्रीय प्रौद्योगिकी संस्थान दर्गा
ु परु
National Institute of Technology Durgapur
West Bengal – 713209
India
Month, Year
 Department of Electronics and Communication

राष्ट्रीय प्रोद्योगिकी सस्ं थान दर्गा

ु परु
National Institute of Technology Durgapur
Mahatma Gandhi Avenue, Durgapur-713209
West Bengal
India

BONA-FIDE CERTIFICATE

This is to certify that < Name of the student (s) > bearing Roll No (s). < >, has /have
successfully completed his/her/their project on the thesis entitled, “<……Title of the
thesis……>” under my supervision for submission to National Institute of
Technology Durgapur towards partial fulfillment for the award of the Degree of
Bachelor of Technology in Electronics and Communication Engineering and this
thesis is an authentic record of his own work carried out under my supervision.

…………………………………….

Thesis Supervisor
Designation,
Electronics and Communication Engineering Department,
National Institute of Technology Durgapur

2
 Department of Electronics and Communication

राष्ट्रीय प्रोद्योगिकी सस्ं थान दर्गा

ु परु
National Institute of Technology Durgapur
Mahatma Gandhi Avenue, Durgapur-713209
West Bengal
India

CERTIFICATE OF APPROVAL
The foregoing thesis entitled “<Thesis tile>” is hereby approved as a study of a technology
subject carried out in a manner satisfactory to warrant its acceptance as a prerequisite to the
degree for which it has been submitted. It is understood that by this approval the undersigned
do not endorse or approve any statement made, opinion expressed, or conclusion drawn
thereon. The thesis is approved only for the purpose for which it is submitted.

………………………………

Examiner(s)

3
 DECLARATION
I/We, <Name of the student1>, … and <Name of the student N> bearing Roll Number (s)
<Roll Number of student 1>, … and <Roll Number of student N> respectively of B. Tech in
Electronics and Communication Engineering hereby declare that my B. Tech. Project / Thesis
titled “<Title of the thesis>" has been carried out independently by me/us. I / we also declare
that I/we have not indulged in any form of plagiarism to carry out the project and also while
writing this report. The work or ideas of other authors which are utilized in this report has
been properly acknowledged and mentioned in the Bibliography. The work presented in this
dissertation or any part thereof has not been submitted anywhere else for the award of any
degree in another university. I/we undertake total responsibility if any traces of plagiarism is
found at any later stage. In such a case my degree will be cancelled automatically.

Date:
Place: NIT, Durgapur

(Full name of student 1)

Roll Number: …………

(Full name of student 2)

Roll Number: …………

4
 ACKNOWLEDGEMENT

Date:
…………………………………………
Place:
Full Name

5
 ABSTRACT

The abstract tells prospective readers what you did and what the important findings in your
research were. Together with the title, it's the advertisement of your article. Make it
interesting and easily understood without reading the whole article.  Avoid using jargon,
uncommon abbreviations and references.

You must be accurate, using the words that convey the precise meaning of your work. The
abstract provides a short description of the perspective and purpose of your thesis. It gives
key results but minimizes experimental details. It is very important to remind that the abstract
offers a short description of the interpretation/conclusion in the last sentence.

A clear abstract will strongly influence whether or not your work is further considered.
However, the abstracts must be keep as brief as possible. Write it within 250 – 500 words.

6
 NOMENCLATURE

Abbreviation Full form

LAA Linear antenna array

SLL Sidelobe level

7
 LIST OF SYMBOLS

Progressive phase shift

d Inter- element Spacing Between Two Antenna
Element
θ Angle Measured from the Broadside
Direction
.
.
.
.

8
 LIST OF FIGURES

Figur Page
e No. Title No.
CHAPTER 2.1
2

2.2

CHAPTER
3

3.1

3.2

CHAPTER 4.1
4

4.2

9
 LIST OF TABLES

Table Title Pag

No. e
No.
CHAPTER 1.1
1

1.2

10
 CONTENTS

Title Page I

Certificate of Recommendation ii

Bona-fide Certificate iii

Certificate of Approval iv

Declaration v

Acknowledgements vi

Abstract vii

Nomenclature viii

List of symbols ix

List of Figures x

List of Tables xi

Table of Contents xii

CHAPTER 1 Introduction 1

1.1 1

1.1.1 -

1.1.2 -

1.2 -

1.2.1 -

1.2.2 --

1.3 --

1.4 Summary --

CHAPTER 2 -

2.1 --

2.2 -

11
 2.3 -

2.4 Summary -

CHAPTER 3 -

3.1 -

3.2 -

3.4 Summary -

CHAPTER 4 -

4.1 -

4.2 -

4.6 Summary -

CHAPTER 5 Concluding Remarks and Scope for Future Work -

5.1 Concluding Remarks -

5.2 Scope for Future Work -

References -

Appendix A: -

Appendix B: -

12